The DOI matches its Crossref record; 92 of the 92 references it cites were found in a registry or an index.
Transition Metal Oxide Anodes for Electrochemical Energy Storage in Lithium‐ and Sodium‐Ion Batteries
Open accessAbstract
Lithium‐ion batteries (LIBs) with outstanding energy and power density have been extensively investigated in recent years, rendering them the most suitable energy storage technology for application in emerging markets such as electric vehicles and stationary storage. More recently, sodium, one of the most abundant elements on earth, exhibiting similar physicochemical properties as lithium, has been gaining increasing attention for the development of sodium‐ion batteries (SIBs) in order to address the concern about Li availability and cost—especially with regard to stationary applications for which size and volume of the battery are of less importance. Compared with traditional intercalation reactions, conversion reaction‐based transition metal oxides (TMOs) are prospective anode materials for rechargeable batteries thanks to their low cost and high gravimetric specific capacities. In this review, the recent progress and remaining challenges of conversion reactions for LIBs and SIBs are discussed, covering an overview about the different synthesis methods, morphological characteristics, as well as their electrochemical performance. Potential future research directions and a perspective toward the practical application of TMOs for electrochemical energy storage are also provided.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Nano-sized transition-metal oxides as negative-electrode materials for lithium-ion batteries
Poizot, P., Laruelle, S., Grugeon, S., Dupont, L., & Tarascon, J.-M. (2000) · Nature · doi:10.1038/35035045 · Cited by 8,041
Challenges in the development of advanced Li-ion batteries: a review
Etacheri, V., Marom, R., Elazari, R., Salitra, G., & Aurbach, D. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01598b · Cited by 6,726
Sodium-ion batteries: present and future
Hwang, J.-Y., Myung, S.-T., & Sun, Y.-K. (2017) · Chemical Society Reviews · doi:10.1039/c6cs00776g · Cited by 5,305
Promise and reality of post-lithium-ion batteries with high energy densities
Choi, J. W., & Aurbach, D. (2016) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.13 · Cited by 5,110
Metal Oxides and Oxysalts as Anode Materials for Li Ion Batteries
Reddy, M. V., Subba Rao, G. V., & Chowdari, B. V. R. (2013) · Chemical Reviews · doi:10.1021/cr3001884 · Cited by 2,921
From Lithium‐Ion to Sodium‐Ion Batteries: Advantages, Challenges, and Surprises
Nayak, P. K., Yang, L., Brehm, W., & Adelhelm, P. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201703772 · Cited by 2,674
A cost and resource analysis of sodium-ion batteries
Vaalma, C., Buchholz, D., Weil, M., & Passerini, S. (2018) · Nature Reviews Materials · doi:10.1038/natrevmats.2018.13 · Cited by 2,613
Self-citationTin-Based Amorphous Oxide: A High-Capacity Lithium-Ion-Storage Material
Idota, Y., Kubota, T., Matsufuji, A., Maekawa, Y., & Miyasaka, T. (1997) · Science · doi:10.1126/science.276.5317.1395 · Cited by 2,578
Wu, Z.-S., Ren, W., Wen, L., Gao, L., Zhao, J., Chen, Z., Zhou, G., Li, F., & Cheng, H.-M. (2010) · ACS Nano · doi:10.1021/nn100740x · Cited by 2,446
Cabana, J., Monconduit, L., Larcher, D., & Palacín, M. R. (2010) · Advanced Materials · doi:10.1002/adma.201000717 · Cited by 2,361
Mixed Transition‐Metal Oxides: Design, Synthesis, and Energy‐Related Applications
Yuan, C., Wu, H. B., Xie, Y., & Lou, X. W. (. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201303971 · Cited by 2,304
Nanostructured Materials for Electrochemical Energy Conversion and Storage Devices
Guo, Y., Hu, J., & Wan, L. (2008) · Advanced Materials · doi:10.1002/adma.200800627 · Cited by 2,223
Alloy Negative Electrodes for Li-Ion Batteries
Obrovac, M. N., & Chevrier, V. L. (2014) · Chemical Reviews · doi:10.1021/cr500207g · Cited by 2,175
Mn3O4−Graphene Hybrid as a High-Capacity Anode Material for Lithium Ion Batteries
Wang, H., Cui, L.-F., Yang, Y., Sanchez Casalongue, H., Robinson, J. T., Liang, Y., Cui, Y., & Dai, H. (2010) · Journal of the American Chemical Society · doi:10.1021/ja105296a · Cited by 1,948
Zero‐Strain Insertion Material of Li [ Li1 / 3Ti5 / 3 ] O 4 for Rechargeable Lithium Cells
Ohzuku, T., Ueda, A., & Yamamoto, N. (1995) · Journal of The Electrochemical Society · doi:10.1149/1.2048592 · Cited by 1,940
Zhou, G., Wang, D.-W., Li, F., Zhang, L., Li, N., Wu, Z.-S., Wen, L., Lu, G. Q. (., & Cheng, H.-M. (2010) · Chemistry of Materials · doi:10.1021/cm101532x · Cited by 1,856
Rapidly falling costs of battery packs for electric vehicles
Nykvist, B., & Nilsson, M. (2015) · Nature Climate Change · doi:10.1038/nclimate2564 · Cited by 1,819
α‐Fe2O3 Nanotubes in Gas Sensor and Lithium‐Ion Battery Applications
Chen, J., Xu, L., Li, W., & Gou, X. (2005) · Advanced Materials · doi:10.1002/adma.200401101 · Cited by 1,605
Olivetti, E. A., Ceder, G., Gaustad, G. G., & Fu, X. (2017) · Joule · doi:10.1016/j.joule.2017.08.019 · Cited by 1,572
Ong, S. P., Chevrier, V. L., Hautier, G., Jain, A., Moore, C., Kim, S., Ma, X., & Ceder, G. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01782a · Cited by 1,415
Mesoporous Co3O4Nanowire Arrays for Lithium Ion Batteries with High Capacity and Rate Capability
Li, Y., Tan, B., & Wu, Y. (2008) · Nano Letters · doi:10.1021/nl0725906 · Cited by 1,271
Zhu, X., Zhu, Y., Murali, S., Stoller, M. D., & Ruoff, R. S. (2011) · ACS Nano · doi:10.1021/nn200493r · Cited by 1,270
Carbon Coated Fe3O4 Nanospindles as a Superior Anode Material for Lithium‐Ion Batteries
Zhang, W., Wu, X., Hu, J., Guo, Y., & Wan, L. (2008) · Advanced Functional Materials · doi:10.1002/adfm.200801386 · Cited by 1,209
Co3O4 Nanomaterials in Lithium‐Ion Batteries and Gas Sensors
Li, W. Y., Xu, L. N., & Chen, J. (2005) · Advanced Functional Materials · doi:10.1002/adfm.200400429 · Cited by 1,201
Tarascon, J.-M. (2010) · Nature Chemistry · doi:10.1038/nchem.680 · Cited by 1,157
Na-Ion Battery Anodes: Materials and Electrochemistry
Luo, W., Shen, F., Bommier, C., Zhu, H., Ji, X., & Hu, L. (2016) · Accounts of Chemical Research · doi:10.1021/acs.accounts.5b00482 · Cited by 1,081
Oxygen Bridges between NiO Nanosheets and Graphene for Improvement of Lithium Storage
Zhou, G., Wang, D.-W., Yin, L.-C., Li, N., Li, F., & Cheng, H.-M. (2012) · ACS Nano · doi:10.1021/nn300098m · Cited by 1,070
α‐Fe2O3 Nanoflakes as an Anode Material for Li‐Ion Batteries
Reddy, M. V., Yu, T., Sow, C. H., Shen, Z. X., Lim, C. T., Subba Rao, G. V., & Chowdari, B. V. R. (2007) · Advanced Functional Materials · doi:10.1002/adfm.200601186 · Cited by 1,064
Lou, X. W., Deng, D., Lee, J. Y., Feng, J., & Archer, L. A. (2008) · Advanced Materials · doi:10.1002/adma.200702412 · Cited by 1,014
Zhang, L., Wu, H. B., Madhavi, S., Hng, H. H., & Lou, X. W. (. (2012) · Journal of the American Chemical Society · doi:10.1021/ja307475c · Cited by 984
Carbon-Encapsulated Fe3O4 Nanoparticles as a High-Rate Lithium Ion Battery Anode Material
He, C., Wu, S., Zhao, N., Shi, C., Liu, E., & Li, J. (2013) · ACS Nano · doi:10.1021/nn401059h · Cited by 981
Coaxial MnO2/Carbon Nanotube Array Electrodes for High-Performance Lithium Batteries
Reddy, A. L. M., Shaijumon, M. M., Gowda, S. R., & Ajayan, P. M. (2009) · Nano Letters · doi:10.1021/nl803081j · Cited by 962
Xu, X., Cao, R., Jeong, S., & Cho, J. (2012) · Nano Letters · doi:10.1021/nl302618s · Cited by 914
Na2Ti3O7: Lowest Voltage Ever Reported Oxide Insertion Electrode for Sodium Ion Batteries
Senguttuvan, P., Rousse, G., Seznec, V., Tarascon, J.-M., & Palacín, M. R. (2011) · Chemistry of Materials · doi:10.1021/cm202076g · Cited by 807
Luo, J., Liu, J., Zeng, Z., Ng, C. F., Ma, L., Zhang, H., Lin, J., Shen, Z., & Fan, H. J. (2013) · Nano Letters · doi:10.1021/nl403461n · Cited by 773
Quasiemulsion-Templated Formation of α-Fe2O3 Hollow Spheres with Enhanced Lithium Storage Properties
Wang, B., Chen, J. S., Wu, H. B., Wang, Z., & Lou, X. W. (. (2011) · Journal of the American Chemical Society · doi:10.1021/ja208346s · Cited by 771
3D Graphene Foams Cross‐linked with Pre‐encapsulated Fe3O4 Nanospheres for Enhanced Lithium Storage
Wei, W., Yang, S., Zhou, H., Lieberwirth, I., Feng, X., & Müllen, K. (2013) · Advanced Materials · doi:10.1002/adma.201300445 · Cited by 754
Nitta, N., & Yushin, G. (2014) · Particle & Particle Systems Characterization · doi:10.1002/ppsc.201300231 · Cited by 724
Ordered Mesoporous Metallic MoO2 Materials with Highly Reversible Lithium Storage Capacity
Shi, Y., Guo, B., Corr, S. A., Shi, Q., Hu, Y.-S., Heier, K. R., Chen, L., Seshadri, R., & Stucky, G. D. (2009) · Nano Letters · doi:10.1021/nl902423a · Cited by 683
Park, J. C., Kim, J., Kwon, H., & Song, H. (2009) · Advanced Materials · doi:10.1002/adma.200800596 · Cited by 652
Fabrication of NiO Nanowall Electrodes for High Performance Lithium Ion Battery
Varghese, B., Reddy, M. V., Yanwu, Z., Lit, C. S., Hoong, T. C., Subba Rao, G. V., Chowdari, B. V. R., Wee, A. T. S., Lim, C. T., & Sow, C.-H. (2008) · Chemistry of Materials · doi:10.1021/cm703512k · Cited by 643
Negative electrodes for Na-ion batteries
Dahbi, M., Yabuuchi, N., Kubota, K., Tokiwa, K., & Komaba, S. (2014) · Physical Chemistry Chemical Physics · doi:10.1039/c4cp00826j · Cited by 623
Key Factors Controlling the Reversibility of the Reaction of Lithium with SnO2 and Sn2 BPO 6 Glass
Courtney, I. A., & Dahn, J. R. (1997) · Journal of The Electrochemical Society · doi:10.1149/1.1837941 · Cited by 614
Fully Reversible Homogeneous and Heterogeneous Li Storage in RuO2 with High Capacity
Balaya, P., Li, H., Kienle, L., & Maier, J. (2003) · Advanced Functional Materials · doi:10.1002/adfm.200304406 · Cited by 605
Zou, F., Chen, Y.-M., Liu, K., Yu, Z., Liang, W., Bhaway, S. M., Gao, M., & Zhu, Y. (2016) · ACS Nano · doi:10.1021/acsnano.5b05041 · Cited by 598
Li-Storage via Heterogeneous Reaction in Selected Binary Metal Fluorides and Oxides
Li, H., Balaya, P., & Maier, J. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1801451 · Cited by 590
Nanostructured Fe3O4/SWNT Electrode: Binder‐Free and High‐Rate Li‐Ion Anode
Ban, C., Wu, Z., Gillaspie, D. T., Chen, L., Yan, Y., Blackburn, J. L., & Dillon, A. C. (2010) · Advanced Materials · doi:10.1002/adma.200904285 · Cited by 580
Titanium‐Based Anode Materials for Safe Lithium‐Ion Batteries
Chen, Z., Belharouak, I., Sun, Y. ‐., & Amine, K. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201200698 · Cited by 525
Pan, H., Lu, X., Yu, X., Hu, Y., Li, H., Yang, X., & Chen, L. (2013) · Advanced Energy Materials · doi:10.1002/aenm.201300139 · Cited by 516
Three‐Dimensional Self‐Supported Metal Oxides for Advanced Energy Storage
Ellis, B. L., Knauth, P., & Djenizian, T. (2014) · Advanced Materials · doi:10.1002/adma.201306126 · Cited by 504
Two‐Dimensional Metal Oxide Nanomaterials for Next‐Generation Rechargeable Batteries
Mei, J., Liao, T., Kou, L., & Sun, Z. (2017) · Advanced Materials · doi:10.1002/adma.201700176 · Cited by 459
Yuan, S., Huang, X., Ma, D., Wang, H., Meng, F., & Zhang, X. (2014) · Advanced Materials · doi:10.1002/adma.201304469 · Cited by 454
Chu, Y., Guo, L., Xi, B., Feng, Z., Wu, F., Lin, Y., Liu, J., Sun, D., Feng, J., Qian, Y., et al. (2018) · Advanced Materials · doi:10.1002/adma.201704244 · Cited by 442
Yamada, Y., Iriyama, Y., Abe, T., & Ogumi, Z. (2009) · Langmuir · doi:10.1021/la901829v · Cited by 380
Guo, W., Sun, W., & Wang, Y. (2015) · ACS Nano · doi:10.1021/acsnano.5b05610 · Cited by 375
Conversion reactions for sodium-ion batteries
Klein, F., Jache, B., Bhide, A., & Adelhelm, P. (2013) · Physical Chemistry Chemical Physics · doi:10.1039/c3cp52125g · Cited by 370
Spongelike Nanosized Mn3O4 as a High-Capacity Anode Material for Rechargeable Lithium Batteries
Gao, J., Lowe, M. A., & Abruña, H. D. (2011) · Chemistry of Materials · doi:10.1021/cm201039w · Cited by 370
NiO nanosheets grown on graphene nanosheets as superior anode materials for Li-ion batteries
Zou, Y., & Wang, Y. (2011) · Nanoscale · doi:10.1039/c1nr10070j · Cited by 368
Hu, L., Huang, Y., Zhang, F., & Chen, Q. (2013) · Nanoscale · doi:10.1039/c3nr00623a · Cited by 364
3D Porous γ‐Fe2O3@C Nanocomposite as High‐Performance Anode Material of Na‐Ion Batteries
Zhang, N., Han, X., Liu, Y., Hu, X., Zhao, Q., & Chen, J. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201401123 · Cited by 356
Reversible Lithium‐Ion Insertion in Molybdenum Oxide Nanoparticles
Lee, S., Kim, Y., Deshpande, R., Parilla, P. A., Whitney, E., Gillaspie, D. T., Jones, K. M., Mahan, A. H., Zhang, S., & Dillon, A. C. (2008) · Advanced Materials · doi:10.1002/adma.200800999 · Cited by 343
Beyond Insertion for Na‐Ion Batteries: Nanostructured Alloying and Conversion Anode Materials
Zhang, H., Hasa, I., & Passerini, S. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702582 · Cited by 316
Self-citationZheng, S.-F., Hu, J.-S., Zhong, L.-S., Song, W.-G., Wan, L.-J., & Guo, Y.-G. (2008) · Chemistry of Materials · doi:10.1021/cm7033855 · Cited by 290
Nanostructured transition metal oxides as advanced anodes for lithium-ion batteries
Zhang, J., & Yu, A. (2015) · Science Bulletin · doi:10.1007/s11434-015-0771-6 · Cited by 283
Porous CuO nanowires as the anode of rechargeable Na-ion batteries
Wang, L., Zhang, K., Hu, Z., Duan, W., Cheng, F., & Chen, J. (2014) · Nano Research · doi:10.1007/s12274-013-0387-6 · Cited by 272
Banerjee, A., Singh, U., Aravindan, V., Srinivasan, M., & Ogale, S. (2013) · Nano Energy · doi:10.1016/j.nanoen.2013.04.008 · Cited by 270
Leveraging valuable synergies by combining alloying and conversion for lithium-ion anodes
Bresser, D., Passerini, S., & Scrosati, B. (2016) · Energy & Environmental Science · doi:10.1039/c6ee02346k · Cited by 261
Self-citationWang, J., Zhang, Q., Li, X., Xu, D., Wang, Z., Guo, H., & Zhang, K. (2014) · Nano Energy · doi:10.1016/j.nanoen.2014.02.012 · Cited by 246
The State and Challenges of Anode Materials Based on Conversion Reactions for Sodium Storage
Wu, C., Dou, S., & Yu, Y. (2018) · Small · doi:10.1002/smll.201703671 · Cited by 188
Highly Efficient Sodium Storage in Iron Oxide Nanotube Arrays Enabled by Built‐In Electric Field
Ni, J., Sun, M., & Li, L. (2019) · Advanced Materials · doi:10.1002/adma.201902603 · Cited by 173
Luo, W., Hu, X., Sun, Y., & Huang, Y. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am302813d · Cited by 171
Thermoelectrochemically Activated MoO[sub 2] Powder Electrode for Lithium Secondary Batteries
Ku, J. H., Jung, Y. S., Lee, K. T., Kim, C. H., & Oh, S. M. (2009) · Journal of The Electrochemical Society · doi:10.1149/1.3141670 · Cited by 149
Micro-nanostructured CuO/C spheres as high-performance anode materials for Na-ion batteries
Lu, Y., Zhang, N., Zhao, Q. X., Liang, J., & Chen, J. (2014) · Nanoscale · doi:10.1039/c4nr06432a · Cited by 132
Jian, Z., Liu, P., Li, F., Chen, M. W., & Zhou, H. S. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta02516d · Cited by 130
Electrochemical reactivity of ball-milled MoO3−y as anode materials for lithium-ion batteries
Jung, Y. S., Lee, S., Ahn, D., Dillon, A. C., & Lee, S.-H. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.11.125 · Cited by 129
Improve the electrochemical performances of Cr2O3 anode for lithium ion batteries
Hu, J.-Y., Li, H., Huang, X., & Chen, L. (2006) · Solid State Ionics · doi:10.1016/j.ssi.2006.03.043 · Cited by 125
Ji, X., Herle, P. S., Rho, Y. H., & Nazar, L. F. (2007) · Chemistry of Materials · doi:10.1021/cm060961y · Cited by 104
Titanate Anodes for Sodium Ion Batteries
Doeff, M. M., Cabana, J., & Shirpour, M. (2013) · Journal of Inorganic and Organometallic Polymers and Materials · doi:10.1007/s10904-013-9977-8 · Cited by 91
The importance of “going nano” for high power battery materials
Bresser, D., Paillard, E. E., Copley, M., Bishop, P. T., Winter, M., & Passerini, S. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.07.035 · Cited by 89
Self-citationGregorczyk, K., Liu, Y., Sullivan, J. P., & Rubloff, G. W. (2013) · ACS Nano · doi:10.1021/nn402451s · Cited by 85
Lithium-ion batteries for stationary energy storage
Xu, T., Wang, W., Gordin, M. L., Wang, D., & Choi, D. (2010) · JOM · doi:10.1007/s11837-010-0131-6 · Cited by 69
Chen, Y., Yuan, X., Yang, C. G., Lian, Y., Razzaq, A. A., Shah, R., Guo, J. M., Zhao, X., Peng, Y., & Deng, Z. (2018) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2018.10.371 · Cited by 68
Yang, C. C., Zhang, D. M., Du, L., & Jiang, Q. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta03692f · Cited by 67
Boesenberg, U., Marcus, M. A., Shukla, A. K., Yi, T., McDermott, E., Teh, P. F., Srinivasan, M., Moewes, A., & Cabana, J. (2014) · Scientific Reports · doi:10.1038/srep07133 · Cited by 62
Sheng, L., Jiang, H., Liu, S., Chen, M., Wei, T., & Fan, Z. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.07.021 · Cited by 56
Zhang, X., Zhu, G., Yan, D., Lu, T., & Pan, L. (2017) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2017.03.314 · Cited by 55
In situ observation of the sodiation process in CuO nanowires
Liu, H., Cao, F., He, Z., Sheng, H., Li, L., Wu, S., Liu, C., & Wang, J. (2015) · Chemical Communications · doi:10.1039/c5cc03734d · Cited by 51
A new, high performance CuO/LiNi0.5Mn1.5O4 lithium-ion battery
Verrelli, R., Hassoun, J., Farkas, A., et al. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta13960c · Cited by 47
Aravindan, V., Nagasubramanian, A., Shubha, N., Jayaraman, S., & Srinivasan, M. (2016) · Electrochimica Acta · doi:10.1016/j.electacta.2016.08.078 · Cited by 46
Verrelli, R., Scrosati, B., Sun, Y., & Hassoun, J. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am500499a · Cited by 43
Liang, Y., Yang, S., Yi, Z., Sun, J., & Zhou, Y. (2005) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2005.03.034 · Cited by 41
Backert, G., Oschmann, B., Tahir, M. N., Mueller, F., Lieberwirth, I., Balke, B., Tremel, W., Passerini, S., & Zentel, R. (2016) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2016.06.011 · Cited by 18
Self-citation
Cited by
Asenbauer, J., Eisenmann, T., Kuenzel, M., Kazzazi, A., Chen, Z., & Bresser, D. (2020) · Sustainable Energy & Fuels · doi:10.1039/d0se00175a · Cited by 1,295
Self-citationPrussian Blue Analogues for Sodium‐Ion Batteries: Past, Present, and Future
Peng, J., Zhang, W., Liu, Q., Wang, J., Chou, S., Liu, H., & Dou, S. (2022) · Advanced Materials · doi:10.1002/adma.202108384 · Cited by 849
Understanding of the sodium storage mechanism in hard carbon anodes
Chen, X., Liu, C., Fang, Y., Ai, X., Zhong, F., Yang, H., & Cao, Y. (2022) · Carbon Energy · doi:10.1002/cey2.196 · Cited by 527
Li, C., Li, Q., Kaneti, Y. V., Hou, D., Yamauchi, Y., & Mai, Y. (2020) · Chemical Society Reviews · doi:10.1039/d0cs00021c · Cited by 513
Abdalla, A. N., Nazir, M. S., Tao, H., Cao, S., Ji, R., Jiang, M., & Yao, L. (2021) · Journal of Energy Storage · doi:10.1016/j.est.2021.102811 · Cited by 406
Metadata
- Authors
- Fang, S., Bresser, D., & Passerini, S.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2019-11-18
- Volume
- 10
- Issue
- 1
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2987603913
- Cited by
- 823
- References
- 92
- FWCI
- 34.72
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.