The DOI matches its Crossref record; 106 of the 106 references it cites were found in a registry or an index.
Advances and Future Perspectives in 4D Bioprinting
Open accessAbstract
Three‐dimensionally printed constructs are static and do not recapitulate the dynamic nature of tissues. Four‐dimensional (4D) bioprinting has emerged to include conformational changes in printed structures in a predetermined fashion using stimuli‐responsive biomaterials and/or cells. The ability to make such dynamic constructs would enable an individual to fabricate tissue structures that can undergo morphological changes. Furthermore, other fields (bioactuation, biorobotics, and biosensing) will benefit from developments in 4D bioprinting. Here, the authors discuss stimuli‐responsive biomaterials as potential bioinks for 4D bioprinting. Natural cell forces can also be incorporated into 4D bioprinted structures. The authors introduce mathematical modeling to predict the transition and final state of 4D printed constructs. Different potential applications of 4D bioprinting are also described. Finally, the authors highlight future perspectives for this emerging technology in biomedicine.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
Azevedo, R. S. S., de Sousa, J. R., Araujo, M. T. F., Martins Filho, A. J., de Alcantara, B. N., Araujo, F. M. C., Queiroz, M. G. L., Cruz, A. C. R., Vasconcelos, B. H. B., Chiang, J. O., et al. (2018) · Scientific Reports · doi:10.1038/s41598-017-17765-5 · Cited by 3,478
Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A. (2016) · Nature Materials · doi:10.1038/nmat4544 · Cited by 3,027
Cells lying on a bed of microneedles: An approach to isolate mechanical force
Tan, J. L., Tien, J., Pirone, D. M., Gray, D. S., Bhadriraju, K., & Chen, C. S. (2003) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0235407100 · Cited by 1,962
Current advances and future perspectives in extrusion-based bioprinting
Ozbolat, I. T., & Hospodiuk, M. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2015.10.076 · Cited by 1,572
Markstedt, K., Mantas, A., Tournier, I., Martínez Ávila, H., Hägg, D., & Gatenholm, P. (2015) · Biomacromolecules · doi:10.1021/acs.biomac.5b00188 · Cited by 1,528
Stimuli-responsive polymers and their applications
Wei, M., Gao, Y., Li, X., & Serpe, M. J. (2017) · Polymer Chemistry · doi:10.1039/c6py01585a · Cited by 1,298
Kocak, G., Tuncer, C., & Bütün, V. (2017) · Polymer Chemistry · doi:10.1039/c6py01872f · Cited by 1,189
4D Printing: Multi‐Material Shape Change
Tibbits, S. (2014) · Architectural Design · doi:10.1002/ad.1710 · Cited by 1,188
Momeni, F., M.Mehdi Hassani.N, S., Liu, X., & Ni, J. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.02.068 · Cited by 1,165
Multimaterial 4D Printing with Tailorable Shape Memory Polymers
Ge, Q., Sakhaei, A. H., Lee, H., Dunn, C. K., Fang, N. X., & Dunn, M. L. (2016) · Scientific Reports · doi:10.1038/srep31110 · Cited by 1,160
Chiroptical Molecular Switches
Feringa, B. L., van Delden, R. A., Koumura, N., & Geertsema, E. M. (2000) · Chemical Reviews · doi:10.1021/cr9900228 · Cited by 1,137
3D-printing techniques in a medical setting: a systematic literature review
Tack, P., Victor, J., Gemmel, P., & Annemans, L. (2016) · BioMedical Engineering OnLine · doi:10.1186/s12938-016-0236-4 · Cited by 1,098
Multimaterial magnetically assisted 3D printing of composite materials
Kokkinis, D., Schaffner, M., & Studart, A. R. (2015) · Nature Communications · doi:10.1038/ncomms9643 · Cited by 848
Phototactic guidance of a tissue-engineered soft-robotic ray
Park, S.-J., Gazzola, M., Park, K. S., Park, S., Di Santo, V., Blevins, E. L., Lind, J. U., Campbell, P. H., Dauth, S., Capulli, A. K., et al. (2016) · Science · doi:10.1126/science.aaf4292 · Cited by 721
Thermo-sensitive polymeric micelles based on poly (N-isopropylacrylamide) as drug carriers
Wei, H., Cheng, S.-X., Zhang, X.-Z., & Zhuo, R.-X. (2009) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.05.002 · Cited by 718
4D Bioprinting for Biomedical Applications
Gao, B., Yang, Q., Zhao, X., Jin, G., Ma, Y., & Xu, F. (2016) · Trends in Biotechnology · doi:10.1016/j.tibtech.2016.03.004 · Cited by 711
Three-dimensional tissue culture based on magnetic cell levitation
Souza, G. R., Molina, J. R., Raphael, R. M., Ozawa, M. G., Stark, D. J., Levin, C. S., Bronk, L. F., Ananta, J. S., Mandelin, J., Georgescu, M.-M., et al. (2010) · Nature Nanotechnology · doi:10.1038/nnano.2010.23 · Cited by 662
3D biofabrication strategies for tissue engineering and regenerative medicine
Bajaj, P., Schweller, R. M., Khademhosseini, A., West, J. L., & Bashir, R. (2014) · Annual Review of Biomedical Engineering · doi:10.1146/annurev-bioeng-071813-105155 · Cited by 632
Self-citationZhang, A., & Lieber, C. M. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00608 · Cited by 621
Active printed materials for complex self-evolving deformations
Raviv, D., Zhao, W., McKnelly, C., Papadopoulou, A., Kadambi, A., Shi, B., Hirsch, S., Dikovsky, D., Zyracki, M., Olguin, C., et al. (2014) · Scientific Reports · doi:10.1038/srep07422 · Cited by 568
4D Printing with Mechanically Robust, Thermally Actuating Hydrogels
Bakarich, S. E., Gorkin, R., Panhuis, M. I. H., & Spinks, G. M. (2015) · Macromolecular Rapid Communications · doi:10.1002/marc.201500079 · Cited by 526
Wei, H., Zhang, Q., Yao, Y., Liu, L., Liu, Y., & Leng, J. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b12824 · Cited by 504
4D Biofabrication Using Shape‐Morphing Hydrogels
Kirillova, A., Maxson, R., Stoychev, G., Gomillion, C. T., & Ionov, L. (2017) · Advanced Materials · doi:10.1002/adma.201703443 · Cited by 494
Magnetic Field-Responsive Smart Polymer Composites
Filipcsei, G., Csetneki, I., Szilágyi, A., & Zrínyi, M. (2007) · Advances in Polymer Science · doi:10.1007/12_2006_104 · Cited by 478
3D Printed Graphene Based Energy Storage Devices
Foster, C. W., Down, M. P., Zhang, Y., Ji, X., Rowley-Neale, S. J., Smith, G. C., Kelly, P. J., & Banks, C. E. (2017) · Scientific Reports · doi:10.1038/srep42233 · Cited by 471
Huebsch, N., Kearney, C. J., Zhao, X., Kim, J., Cezar, C. A., Suo, Z., & Mooney, D. J. (2014) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1405469111 · Cited by 453
Microfluidics‐Enabled Multimaterial Maskless Stereolithographic Bioprinting
Miri, A. K., Nieto, D., Iglesias, L., Goodarzi Hosseinabadi, H., Maharjan, S., Ruiz‐Esparza, G. U., Khoshakhlagh, P., Manbachi, A., Dokmeci, M. R., Chen, S., et al. (2018) · Advanced Materials · doi:10.1002/adma.201800242 · Cited by 431
Self-citationSpatiotemporal hydrogel biomaterials for regenerative medicine
Brown, T. E., & Anseth, K. S. (2017) · Chemical Society Reviews · doi:10.1039/c7cs00445a · Cited by 428
Bioprinting Technology: A Current State-of-the-Art Review
Dababneh, A. B., & Ozbolat, I. T. (2014) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4028512 · Cited by 427
Temperature-responsive compounds as in situ gelling biomedical materials
Moon, H. J., Ko, D. Y., Park, M. H., Joo, M. K., & Jeong, B. (2012) · Chemical Society Reviews · doi:10.1039/c2cs35078e · Cited by 421
4D Printing of Shape Memory‐Based Personalized Endoluminal Medical Devices
Zarek, M., Mansour, N., Shapira, S., & Cohn, D. (2017) · Macromolecular Rapid Communications · doi:10.1002/marc.201600628 · Cited by 419
Stimuli responsive drug delivery systems based on nano-graphene for cancer therapy
Yang, K., Feng, L., & Liu, Z. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.05.015 · Cited by 415
Flexible shape-memory scaffold for minimally invasive delivery of functional tissues
Montgomery, M., Ahadian, S., Davenport Huyer, L., Lo Rito, M., Civitarese, R. A., Vanderlaan, R. D., Wu, J., Reis, L. A., Momen, A., Akbari, S., et al. (2017) · Nature Materials · doi:10.1038/nmat4956 · Cited by 409
Self-citationMagnetic actuated pH-responsive hydrogel-based soft micro-robot for targeted drug delivery
Li, H., Go, G., Ko, S. Y., Park, J.-O., & Park, S. (2016) · Smart Materials and Structures · doi:10.1088/0964-1726/25/2/027001 · Cited by 394
4D Printed Actuators with Soft-Robotic Functions
López‐Valdeolivas, M., Liu, D., Broer, D. J., & Sánchez‐Somolinos, C. (2018) · Macromolecular Rapid Communications · doi:10.1002/marc.201700710 · Cited by 371
4D Printing Technology: A Review
Choi, J., Kwon, O.-C., Jo, W., Lee, H. J., & Moon, M.-W. (2015) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2015.0039 · Cited by 365
Freeman, F. E., & Kelly, D. J. (2017) · Scientific Reports · doi:10.1038/s41598-017-17286-1 · Cited by 362
de Haan, L. T., Verjans, J. M. N., Broer, D. J., Bastiaansen, C. W. M., & Schenning, A. P. H. J. (2014) · Journal of the American Chemical Society · doi:10.1021/ja505475x · Cited by 353
Optogenetic skeletal muscle-powered adaptive biological machines
Raman, R., Cvetkovic, C., Uzel, S. G. M., Platt, R. J., Sengupta, P., Kamm, R. D., & Bashir, R. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1516139113 · Cited by 344
Organ-on-a-chip platforms: a convergence of advanced materials, cells, and microscale technologies
Ahadian, S., Civitarese, R., Bannerman, D., Mohammadi, M. H., Lu, R., Wang, E., Davenport‐Huyer, L., Lai, B., Zhang, B., Zhao, Y., et al. (2018) · Advanced Healthcare Materials · doi:10.1002/adhm.201700506 · Cited by 315
Self-citationWu, S., Zhang, J., Ladani, R. B., Ravindran, A. R., Mouritz, A. P., Kinloch, A. J., & Wang, C. H. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b00847 · Cited by 302
Micro 3D Printing of a Temperature-Responsive Hydrogel Using Projection Micro-Stereolithography
Han, D., Lu, Z., Chester, S. A., & Lee, H. (2018) · Scientific Reports · doi:10.1038/s41598-018-20385-2 · Cited by 290
Wang, L. L., Highley, C. B., Yeh, Y., Galarraga, J. H., Uman, S., & Burdick, J. A. (2018) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.36323 · Cited by 286
Liu, W., Zhong, Z., Hu, N., Zhou, Y., Maggio, L., Miri, A. K., Fragasso, A., Jin, X., Khademhosseini, A., & Zhang, Y. S. (2018) · Biofabrication · doi:10.1088/1758-5090/aa9d44 · Cited by 280
Self-citationConducting polymer-hydrogels for medical electrode applications
Green, R. A., Baek, S., Poole-Warren, L. A., & Martens, P. J. (2010) · Science and Technology of Advanced Materials · doi:10.1088/1468-6996/11/1/014107 · Cited by 268
Bagheri, A., Arandiyan, H., Boyer, C., & Lim, M. (2016) · Advanced Science · doi:10.1002/advs.201500437 · Cited by 265
Photodegradable Macromers and Hydrogels for Live Cell Encapsulation and Release
Griffin, D. R., & Kasko, A. M. (2012) · Journal of the American Chemical Society · doi:10.1021/ja305280w · Cited by 264
3D Printing of Reduced Graphene Oxide Nanowires
Kim, J. H., Chang, W. S., Kim, D., Yang, J. R., Han, J. T., Lee, G., Kim, J. T., & Seol, S. K. (2015) · Advanced Materials · doi:10.1002/adma.201404380 · Cited by 258
Kuribayashi-Shigetomi, K., Onoe, H., & Takeuchi, S. (2012) · PLoS ONE · doi:10.1371/journal.pone.0051085 · Cited by 255
A Bioactive Carbon Nanotube‐Based Ink for Printing 2D and 3D Flexible Electronics
Shin, S. R., Farzad, R., Tamayol, A., Manoharan, V., Mostafalu, P., Zhang, Y. S., Akbari, M., Jung, S. M., Kim, D., Comotto, M., et al. (2016) · Advanced Materials · doi:10.1002/adma.201506420 · Cited by 236
Self-citationHandheld co-axial bioprinting: application to in situ surgical cartilage repair
Duchi, S., Onofrillo, C., O’Connell, C. D., Blanchard, R., Augustine, C., Quigley, A. F., Kapsa, R. M. I., Pivonka, P., Wallace, G., Di Bella, C., et al. (2017) · Scientific Reports · doi:10.1038/s41598-017-05699-x · Cited by 219
PH sensitive N-succinyl chitosan grafted polyacrylamide hydrogel for oral insulin delivery
Mukhopadhyay, P., Sarkar, K., Bhattacharya, S., Bhattacharyya, A., Mishra, R., & Kundu, P. P. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.06.045 · Cited by 217
Three-Dimensional Printed Graphene Foams
Sha, J., Li, Y., Villegas Salvatierra, R., Wang, T., Dong, P., Ji, Y., Lee, S.-K., Zhang, C., Zhang, J., Smith, R. H., et al. (2017) · ACS Nano · doi:10.1021/acsnano.7b01987 · Cited by 214
Three dimensional (3D) printed electrodes for interdigitated supercapacitors
Zhao, C., Wang, C., Gorkin, R., Beirne, S., Shu, K., & Wallace, G. G. (2014) · Electrochemistry Communications · doi:10.1016/j.elecom.2014.01.013 · Cited by 213
Multi-stimuli responsive and multi-functional oligoaniline-modified vitrimers
Chen, Q., Yu, X., Pei, Z., Yang, Y., Wei, Y., & Ji, Y. (2017) · Chemical Science · doi:10.1039/c6sc02855a · Cited by 209
Mechanisms of multi-shape memory effects and associated energy release in shape memory polymers
Yu, K., Xie, T., Leng, J., Ding, Y., & Qi, H. J. (2012) · Soft Matter · doi:10.1039/c2sm25292a · Cited by 207
Development of hydrogels for regenerative engineering
Guan, X., Avci‐Adali, M., Alarçin, E., Cheng, H., Kashaf, S. S., Li, Y., Chawla, A., Jang, H. L., & Khademhosseini, A. (2017) · Biotechnology Journal · doi:10.1002/biot.201600394 · Cited by 199
Self-citationShigemitsu, H., & Hamachi, I. (2017) · Accounts of Chemical Research · doi:10.1021/acs.accounts.7b00070 · Cited by 199
Electrically Driven Microengineered Bioinspired Soft Robots
Shin, S. R., Migliori, B., Miccoli, B., Li, Y., Mostafalu, P., Seo, J., Mandla, S., Enrico, A., Antona, S., Sabarish, R., et al. (2018) · Advanced Materials · doi:10.1002/adma.201704189 · Cited by 195
Self-citationMulti-responsive hydrogels for drug delivery and tissue engineering applications
Knipe, J. M., & Peppas, N. A. (2014) · Regenerative Biomaterials · doi:10.1093/rb/rbu006 · Cited by 183
Guided and magnetic self-assembly of tunable magnetoceptive gels
Tasoglu, S., Yu, C. H., Gungordu, H. I., Guven, S., Vural, T., & Demirci, U. (2014) · Nature Communications · doi:10.1038/ncomms5702 · Cited by 168
Surface acoustic waves induced micropatterning of cells in gelatin methacryloyl (GelMA) hydrogels
Naseer, S. M., Manbachi, A., Samandari, M., Walch, P., Gao, Y., Zhang, Y. S., Davoudi, F., Wang, W., Abrinia, K., Cooper, J. M., et al. (2017) · Biofabrication · doi:10.1088/1758-5090/aa585e · Cited by 166
Self-citationGraphene‐Based Electroresponsive Scaffolds as Polymeric Implants for On‐Demand Drug Delivery
Servant, A., Leon, V., Jasim, D., Methven, L., Limousin, P., Fernandez‐Pacheco, E. V., Prato, M., & Kostarelos, K. (2014) · Advanced Healthcare Materials · doi:10.1002/adhm.201400016 · Cited by 165
Moldable elastomeric polyester-carbon nanotube scaffolds for cardiac tissue engineering
Ahadian, S., Davenport Huyer, L., Estili, M., Yee, B., Smith, N., Xu, Z., Sun, Y., & Radisic, M. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2016.12.009 · Cited by 163
Self-citationA 3D magnetic tissue stretcher for remote mechanical control of embryonic stem cell differentiation
Du, V., Luciani, N., Richard, S., Mary, G., Gay, C., Mazuel, F., Reffay, M., Menasché, P., Agbulut, O., & Wilhelm, C. (2017) · Nature Communications · doi:10.1038/s41467-017-00543-2 · Cited by 161
Zakharchenko, S., Puretskiy, N., Stoychev, G. V., Stamm, M., & Ionov, L. (2010) · Soft Matter · doi:10.1039/c0sm00088d · Cited by 158
Ma, Y., Ji, Y., Zhong, T., Wan, W., Yang, Q., Li, A., Zhang, X., & Lin, M. (2017) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.7b00601 · Cited by 158
A Mathematical Model on the Resolution of Extrusion Bioprinting for the Development of New Bioinks
Suntornnond, R., Tan, E. Y. S., An, J., & Chua, C. (2016) · Materials · doi:10.3390/ma9090756 · Cited by 152
3D bioprinting of BMSC-laden methacrylamide gelatin scaffolds with CBD-BMP2-collagen microfibers
Du, M., Chen, B., Meng, Q., Liu, S., Zheng, X., Zhang, C., Wang, H., Li, H., Wang, N., & Dai, J. (2015) · Biofabrication · doi:10.1088/1758-5090/7/4/044104 · Cited by 145
Organ‐On‐A‐Chip Platforms: A Convergence of Advanced Materials, Cells, and Microscale Technologies
Ahadian, S., Civitarese, R., Bannerman, D., Mohammadi, M. H., Lu, R. X. Z., Wang, E. Y., Huyer, L. D., Lai, B., Zhang, B., Zhao, Y., et al. (2018) · Advanced Healthcare Materials · doi:10.1002/adhm.201800734 · Cited by 138
Self-citationEnabling personalized implant and controllable biosystem development through 3D printing
Nagarajan, N., Dupret‐Bories, A., Karabulut, E., Zorlutuna, P., & Vrana, N. E. (2018) · Biotechnology Advances · doi:10.1016/j.biotechadv.2018.02.004 · Cited by 134
Ma, Y., Ji, Y., Huang, G., Ling, K., Zhang, X., & Xu, F. (2015) · Biofabrication · doi:10.1088/1758-5090/7/4/044105 · Cited by 130
Ahadian, S., Ramón‐Azcón, J., Ostrovidov, S., Camci‐Unal, G., Hosseini, V., Kaji, H., Ino, K., Shiku, H., Khademhosseini, A., & Matsue, T. (2012) · Lab on a Chip · doi:10.1039/c2lc40479f · Cited by 123
Self-citationElectroresponsive Polymer–Carbon Nanotube Hydrogel Hybrids for Pulsatile Drug Delivery In Vivo
Servant, A., Methven, L., Williams, R., & Kostarelos, K. (2012) · Advanced Healthcare Materials · doi:10.1002/adhm.201200193 · Cited by 122
Khutoryanskaya, O. V., Kenessova, Z. A., Mun, G. A., & Khutoryanskiy, V. V. (2008) · Biomacromolecules · doi:10.1021/bm8006242 · Cited by 119
Advances in nanowire bioelectronics
Zhou, W. M., Dai, X., & Lieber, C. M. (2016) · Reports on Progress in Physics · doi:10.1088/0034-4885/80/1/016701 · Cited by 119
3D Printing of Cantilever-Type Microstructures by Stereolithography of Ferromagnetic Photopolymers
Credi, C., Fiorese, A., Tironi, M., et al. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b08880 · Cited by 117
Wang, H., Sun, Y., Yi, J., Fu, J., Di, J., Alonso, A. D. C., & Zhou, S. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.02.087 · Cited by 113
Accelerated myotube formation using bioprinting technology for biosensor applications
Cui, X., Gao, G., & Qiu, Y. (2012) · Biotechnology Letters · doi:10.1007/s10529-012-1087-0 · Cited by 109
Applications of three-dimensional (3D) printing for microswimmers and bio-hybrid robotics
Stanton, M. M., Trichet-Paredes, C., & Sánchez, S. (2015) · Lab on a Chip · doi:10.1039/c5lc90019k · Cited by 98
Nanoengineered thermoresponsive magnetic hydrogels for biomedical applications
Jalili, N. A., Muscarello, M., & Gaharwar, A. K. (2016) · Bioengineering & Translational Medicine · doi:10.1002/btm2.10034 · Cited by 98
Three-Dimensional Bioprinting Strategies for Tissue EngineeringPreprint
Zhang, Y. S., Öklü, R., Dokmeci, M. R., & Khademhosseini, A. (2017) · Cold Spring Harbor Perspectives in Medicine · doi:10.1101/cshperspect.a025718 · Cited by 97
Self-citationPerspective: Fabrication of integrated organ-on-a-chip via bioprinting
Yang, Q., Lian, Q., & Xu, F. (2017) · Biomicrofluidics · doi:10.1063/1.4982945 · Cited by 95
Kwok, T.-H., Wang, C. C. L., Deng, D., Zhang, Y., & Chen, Y. (2015) · Journal of Mechanical Design · doi:10.1115/1.4031023 · Cited by 93
Ostrovidov, S., Ahadian, S., Ramón‐Azcón, J., Hosseini, V., Fujie, T., Parthiban, S. P., Shiku, H., Matsue, T., Kaji, H., Ramalingam, M., et al. (2014) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.1956 · Cited by 92
Self-citationElectrical stimulation as a biomimicry tool for regulating muscle cell behavior
Ahadian, S., Ostrovidov, S., Hosseini, V., Kaji, H., Ramalingam, M., Bae, H., & Khademhosseini, A. (2013) · Organogenesis · doi:10.4161/org.25121 · Cited by 91
Self-citationParamagnetic Levitational Assembly of Hydrogels
Taşoğlu, S., Kavaz, D., Gurkan, U. A., Güven, S., Chen, P., Zheng, R., & Demirci, U. (2012) · Advanced Materials · doi:10.1002/adma.201200285 · Cited by 87
Jalili, N. A., Jaiswal, M. K., Peak, C. W., Cross, L., & Gaharwar, A. K. (2017) · Nanoscale · doi:10.1039/c7nr02327h · Cited by 86
Smart scaffolds in tissue regeneration
Ahadian, S., & Khademhosseini, A. (2018) · Regenerative Biomaterials · doi:10.1093/rb/rby007 · Cited by 71
Self-citationYuan, H., Li, B., Liang, K., Lou, X., & Zhang, Y. (2014) · Biomedical Materials · doi:10.1088/1748-6041/9/5/055001 · Cited by 68
3D Printing/Interfacial Polymerization Coupling for the Fabrication of Conductive Hydrogel
Fantino, E., Roppolo, I., Zhang, D., Xiao, J., Chiappone, A., Castellino, M., Guo, Q., Pirri, C. F., & Yang, J. (2018) · Macromolecular Materials and Engineering · doi:10.1002/mame.201700356 · Cited by 66
Eldin, M. S. M., Kamoun, E. A., Sofan, M. A., & Elbayomi, S. M. (2014) · Arabian Journal of Chemistry · doi:10.1016/j.arabjc.2014.01.007 · Cited by 65
Gómez, L. P. C., Spangenberg, A., Ton, X., Fuchs, Y., Bokeloh, F., Malval, J., Bui, B. T. S., Thuau, D., Ayela, C., Haupt, K., et al. (2016) · Advanced Materials · doi:10.1002/adma.201600218 · Cited by 64
Electrically regulated differentiation of skeletal muscle cells on ultrathin graphene-based films
Ahadian, S., Ramón‐Azcón, J., Chang, H., Liang, X., Kaji, H., Shiku, H., Nakajima, K., Ramalingam, M., Wu, H., Matsue, T., et al. (2014) · RSC Advances · doi:10.1039/c3ra46218h · Cited by 63
Self-citationIn‐Gel Direct Laser Writing for 3D‐Designed Hydrogel Composites That Undergo Complex Self‐Shaping
Nishiguchi, A., Mourran, A., Zhang, H., & Möller, M. (2017) · Advanced Science · doi:10.1002/advs.201700038 · Cited by 59
A 3D Self‐Shaping Strategy for Nanoresolution Multicomponent Architectures
Su, M., Huang, Z., Li, Y., Qian, X., Li, Z., Hu, X., Pan, Q., Li, F., Li, L., & Song, Y. (2017) · Advanced Materials · doi:10.1002/adma.201703963 · Cited by 55
Yamazaki, N., Sugimoto, T., Fukushima, M., Teranishi, R., Kotaka, A., Shinde, C., Kumei, T., Sumida, Y., Munekata, Y., Maruyama, K.-I., et al. (2017) · Polymer Chemistry · doi:10.1039/c6py01754a · Cited by 54
Ahadian, S., Obregón, R., Ramón‐Azcón, J., Salazar, G. T., Shiku, H., Ramalingam, M., & Matsue, T. (2016) · Journal of Nanoscience and Nanotechnology · doi:10.1166/jnn.2016.12729 · Cited by 53
Self-citationLalitha, K., Prasad, Y. S., Sridharan, V., Maheswari, C. U., John, G., & Nagarajan, S. (2015) · RSC Advances · doi:10.1039/c5ra14744a · Cited by 49
Protein-surface interactions on stimuli-responsive polymeric biomaterials
Cross, M. C., Toomey, R. G., & Gallant, N. D. (2016) · Biomedical Materials · doi:10.1088/1748-6041/11/2/022002 · Cited by 49
Biochemical and Biophysical Cues in Matrix Design for Chronic and Diabetic Wound Treatment
Xiao, Y., Ahadian, S., & Radisic, M. (2016) · Tissue Engineering Part B Reviews · doi:10.1089/ten.teb.2016.0200 · Cited by 46
Self-citationZhang, Q., Liu, J., Yuan, K., Zhang, Z., Zhang, X., & Fang, X. (2017) · Nanotechnology · doi:10.1088/1361-6528/aa883f · Cited by 43
The Use of Microtechnology and Nanotechnology in Fabricating Vascularized Tissues
Obregón, R., Ramón‐Azcón, J., Ahadian, S., Shiku, H., Bae, H., Ramalingam, M., & Matsue, T. (2014) · Journal of Nanoscience and Nanotechnology · doi:10.1166/jnn.2014.9051 · Cited by 25
Self-citationSugimoto, T., Yamazaki, N., Hayashi, T., Yuba, E., Harada, A., Kotaka, A., Shinde, C., Kumei, T., Sumida, Y., Fukushima, M., et al. (2017) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2017.04.043 · Cited by 21
Shi, Y., Wang, X., Deng, X., Tian, R., Zhang, Y., Shang, Q., & Chen, N. (2015) · Journal of Biomaterials Science Polymer Edition · doi:10.1080/09205063.2015.1111718 · Cited by 8
Cited by
3D printing of hydrogels: Rational design strategies and emerging biomedical applications
Li, J., Wu, C., Chu, P. K., & Gelinsky, M. (2020) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100543 · Cited by 862
Inkjet Bioprinting of Biomaterials
Li, X., Liu, B., Pei, B., Chen, J., Zhou, D., Peng, J., Zhang, X., Jia, W., & Xu, T. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00008 · Cited by 686
Bioinks and bioprinting technologies to make heterogeneous and biomimetic tissue constructs
Ashammakhi, N., Ahadian, S., Xu, C., Montazerian, H., Ko, H., Nasiri, R., Barros, N., & Khademhosseini, A. (2019) · Materials Today Bio · doi:10.1016/j.mtbio.2019.100008 · Cited by 549
Self-citationUnagolla, J. M., & Jayasuriya, A. C. (2020) · Applied Materials Today · doi:10.1016/j.apmt.2019.100479 · Cited by 544
4D Printing of Hydrogels: A Review
Champeau, M., Heinze, D. A., Viana, T. N., de Souza, E. R., Chinellato, A. C., & Titotto, S. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201910606 · Cited by 443
Metadata
- Authors
- Ashammakhi, N., Ahadian, S., Zengjie, F., Suthiwanich, K., Lorestani, F., Orive, G., Ostrovidov, S., & Khademhosseini, A.
- Venue
- Biotechnology Journal
- Publisher
- Wiley
- Published
- 2018-11-15
- Volume
- 13
- Issue
- 12
- Pages
- e1800148-e1800148
- ISSN
- 1860-6768 (ISSN-L)
- 1860-7314
- OpenAlex
- W2892300066
- Cited by
- 270
- References
- 106
- FWCI
- 8.68
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.