3D Printing in Pharmaceutical and Medical Applications – Recent Achievements and Challenges
Open accessThe DOI matches its Crossref record; 94 of the 94 references it cites were found in a registry or an index.
Abstract
Growing demand for customized pharmaceutics and medical devices makes the impact of additive manufacturing increased rapidly in recent years. The 3D printing has become one of the most revolutionary and powerful tool serving as a technology of precise manufacturing of individually developed dosage forms, tissue engineering and disease modeling. The current achievements include multifunctional drug delivery systems with accelerated release characteristic, adjustable and personalized dosage forms, implants and phantoms corresponding to specific patient anatomy as well as cell-based materials for regenerative medicine. This review summarizes the newest achievements and challenges of additive manufacturing in the field of pharmaceutical and biomedical research that have been published since 2015. Currently developed techniques of 3D printing are briefly described while comprehensive analysis of extrusion-based methods as the most intensively investigated is provided. The issue of printlets attributes, i.e. shape and size is described with regard to personalized dosage forms and medical devices manufacturing. The undeniable benefits of 3D printing are highlighted, however a critical view resulting from the limitations and challenges of the additive manufacturing is also included. The regulatory issue is pointed as well.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A. (2016) · Nature Materials · doi:10.1038/nmat4544 · Cited by 3,027
Markstedt, K., Mantas, A., Tournier, I., Martínez Ávila, H., Hägg, D., & Gatenholm, P. (2015) · Biomacromolecules · doi:10.1021/acs.biomac.5b00188 · Cited by 1,528
Multimaterial 4D Printing with Tailorable Shape Memory Polymers
Ge, Q., Sakhaei, A. H., Lee, H., Dunn, C. K., Fang, N. X., & Dunn, M. L. (2016) · Scientific Reports · doi:10.1038/srep31110 · Cited by 1,160
3D printing of smart materials: A review on recent progresses in 4D printing
Khoo, Z. X., Teoh, J. E. M., Liu, Y., Chua, C. K., Yang, S., An, J., Leong, K. F., & Yeong, W. Y. (2015) · Virtual and Physical Prototyping · doi:10.1080/17452759.2015.1097054 · Cited by 912
McAllister, D. V., Wang, P. M., Davis, S. P., Park, J.-H., Canatella, P. J., Allen, M. G., & Prausnitz, M. R. (2003) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.2331316100 · Cited by 859
A new chapter in pharmaceutical manufacturing: 3D-printed drug products
Norman, J., Madurawe, R. D., Moore, C. M. V., Khan, M. A., & Khairuzzaman, A. (2017) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.03.001 · Cited by 810
Effect of geometry on drug release from 3D printed tablets
Goyanes, A., Robles Martinez, P., Buanz, A., Basit, A. W., & Gaisford, S. (2015) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2015.04.069 · Cited by 667
A tissue-engineered jellyfish with biomimetic propulsion
Nawroth, J. C., Lee, H., Feinberg, A. W., Ripplinger, C. M., McCain, M. L., Grosberg, A., Dabiri, J. O., & Parker, K. K. (2012) · Nature Biotechnology · doi:10.1038/nbt.2269 · Cited by 647
Stereolithographic (SLA) 3D printing of oral modified-release dosage forms
Wang, J., Goyanes, A., Gaisford, S., & Basit, A. W. (2016) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2016.03.016 · Cited by 612
Khaled, S. A., Burley, J. C., Alexander, M. R., Yang, J., & Roberts, C. J. (2015) · Journal of Controlled Release · doi:10.1016/j.jconrel.2015.09.028 · Cited by 606
Bioresorbable Airway Splint Created with a Three-Dimensional Printer
Zopf, D. A., Hollister, S. J., Nelson, M. E., Ohye, R. G., & Green, G. E. (2013) · New England Journal of Medicine · doi:10.1056/nejmc1206319 · Cited by 589
Fused-filament 3D printing (3DP) for fabrication of tablets
Goyanes, A., Buanz, A. B. M., Basit, A. W., & Gaisford, S. (2014) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2014.09.044 · Cited by 587
Selective laser sintering (SLS) 3D printing of medicines
Fina, F., Goyanes, A., Gaisford, S., & Basit, A. W. (2017) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2017.06.082 · Cited by 577
Active printed materials for complex self-evolving deformations
Raviv, D., Zhao, W., McKnelly, C., Papadopoulou, A., Kadambi, A., Shi, B., Hirsch, S., Dikovsky, D., Zyracki, M., Olguin, C., et al. (2014) · Scientific Reports · doi:10.1038/srep07422 · Cited by 568
3D Bioprinting for Organ Regeneration
Cui, H., Nowicki, M., Fisher, J. P., & Zhang, L. G. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201601118 · Cited by 535
Skowyra, J., Pietrzak, K., & Alhnan, M. A. (2015) · European Journal of Pharmaceutical Sciences · doi:10.1016/j.ejps.2014.11.009 · Cited by 530
Goyanes, A., Wang, J., Buanz, A., Martínez-Pacheco, R., Telford, R., Gaisford, S., & Basit, A. W. (2015) · Molecular Pharmaceutics · doi:10.1021/acs.molpharmaceut.5b00510 · Cited by 511
3D printing of tablets containing multiple drugs with defined release profiles
Khaled, S. A., Burley, J. C., Alexander, M. R., Yang, J., & Roberts, C. J. (2015) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2015.07.067 · Cited by 508
3D Printing Pharmaceuticals: Drug Development to Frontline Care
Trenfield, S. J., Awad, A., Goyanes, A., Gaisford, S., & Basit, A. W. (2018) · Trends in Pharmacological Sciences · doi:10.1016/j.tips.2018.02.006 · Cited by 502
Goyanes, A., Det-Amornrat, U., Wang, J., Basit, A. W., & Gaisford, S. (2016) · Journal of Controlled Release · doi:10.1016/j.jconrel.2016.05.034 · Cited by 490
Skardal, A., Devarasetty, M., Kang, H.-W., Mead, I., Bishop, C., Shupe, T., Lee, S. J., Jackson, J., Yoo, J., Soker, S., et al. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.07.030 · Cited by 428 · cited 1×
“was used as a liver-specific bioink containing primary liver spheroids (92).”
MethodSpringer Handbook of Nanotechnology
(2017) · Springer Handbooks · doi:10.1007/978-3-662-54357-3 · Cited by 417
Melocchi, A., Parietti, F., Maroni, A., Foppoli, A., Gazzaniga, A., & Zema, L. (2016) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2016.05.036 · Cited by 409
3D printing of composite tissue with complex shape applied to ear regeneration
Lee, J.-S., Hong, J. M., Jung, J. W., Shim, J.-H., Oh, J.-H., & Cho, D.-W. (2014) · Biofabrication · doi:10.1088/1758-5082/6/2/024103 · Cited by 407
Coupling 3D printing with hot-melt extrusion to produce controlled-release tablets
Zhang, J., Feng, X., Patil, H., Tiwari, R. V., & Repka, M. A. (2017) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2016.12.049 · Cited by 393
Channelled tablets: An innovative approach to accelerating drug release from 3D printed tablets
Sadia, M., Arafat, B., Ahmed, W., Forbes, R. T., & Alhnan, M. A. (2018) · Journal of Controlled Release · doi:10.1016/j.jconrel.2017.11.022 · Cited by 368
Lee, H., & Cho, D.-W. (2016) · Lab on a Chip · doi:10.1039/c6lc00450d · Cited by 363
A self-propelled biohybrid swimmer at low Reynolds number
Williams, B. J., Anand, S. V., Rajagopalan, J., & Saif, M. T. A. (2014) · Nature Communications · doi:10.1038/ncomms4081 · Cited by 363
Biodegradable 3D printed polymer microneedles for transdermal drug delivery
Luzuriaga, M. A., Berry, D. R., Reagan, J. C., Smaldone, R. A., & Gassensmith, J. J. (2018) · Lab on a Chip · doi:10.1039/c8lc00098k · Cited by 356
Goyanes, A., Fina, F., Martorana, A., Sedough, D., Gaisford, S., & Basit, A. W. (2017) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2017.05.021 · Cited by 355
Laser Additive Manufacturing of High-Performance Materials
Gu, D. (2015) · Springer eBooks · doi:10.1007/978-3-662-46089-4 · Cited by 349
3D printed microneedles for insulin skin delivery
Pere, C. P. P., Economidou, S. N., Lall, G., Ziraud, C., Boateng, J. S., Alexander, B. D., Lamprou, D. A., & Douroumis, D. (2018) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2018.03.031 · Cited by 349
Fabrication of controlled-release budesonide tablets via desktop (FDM) 3D printing
Goyanes, A., Chang, H., Sedough, D., Hatton, G. B., Wang, J., Buanz, A., Gaisford, S., & Basit, A. W. (2015) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2015.10.039 · Cited by 330
Three-dimensional print of a liver for preoperative planning in living donor liver transplantation
Zein, N. N., Hanouneh, I. A., Bishop, P. D., Samaan, M., Eghtesad, B., Quintini, C., Miller, C., Yerian, L., & Klatte, R. (2013) · Liver Transplantation · doi:10.1002/lt.23729 · Cited by 326
Cyborg beast: a low-cost 3d-printed prosthetic hand for children with upper-limb differences
Zuniga, J., Katsavelis, D., Peck, J., Stollberg, J., Petrykowski, M., Carson, A., & Fernandez, C. (2015) · BMC Research Notes · doi:10.1186/s13104-015-0971-9 · Cited by 323
Sadia, M., Sośnicka, A., Arafat, B., Isreb, A., Ahmed, W., Kelarakis, A., & Alhnan, M. A. (2016) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2016.09.050 · Cited by 323
Ethylene vinyl acetate (EVA) as a new drug carrier for 3D printed medical drug delivery devices
Genina, N., Holländer, J., Jukarainen, H., Mäkilä, E. M., Salonen, J., & Sandler, N. (2015) · European Journal of Pharmaceutical Sciences · doi:10.1016/j.ejps.2015.11.005 · Cited by 315
Patient-specific 3D scanned and 3D printed antimicrobial polycaprolactone wound dressings
Muwaffak, Z., Goyanes, A., Clark, V., Basit, A. W., Hilton, S. T., & Gaisford, S. (2017) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2017.04.077 · Cited by 314
Fabricating 3D printed orally disintegrating printlets using selective laser sintering
Fina, F., Madla, C. M., Goyanes, A., Zhang, J., Gaisford, S., & Basit, A. W. (2018) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2018.02.015 · Cited by 300
Melocchi, A., Parietti, F., Loreti, G., Maroni, A., Gazzaniga, A., & Zema, L. (2015) · Journal of Drug Delivery Science and Technology · doi:10.1016/j.jddst.2015.07.016 · Cited by 299
Micro 3D Printing of a Temperature-Responsive Hydrogel Using Projection Micro-Stereolithography
Han, D., Lu, Z., Chester, S. A., & Lee, H. (2018) · Scientific Reports · doi:10.1038/s41598-018-20385-2 · Cited by 290
Kyobula, M., Adedeji, A., Alexander, M. R., Saleh, E., Wildman, R., Ashcroft, I., Gellert, P. R., & Roberts, C. J. (2017) · Journal of Controlled Release · doi:10.1016/j.jconrel.2017.06.025 · Cited by 288
Okwuosa, T. C., Pereira, B. C., Arafat, B., Cieszynska, M., Isreb, A., & Alhnan, M. A. (2017) · Pharmaceutical Research · doi:10.1007/s11095-016-2073-3 · Cited by 277
Fabrication of drug-loaded hydrogels with stereolithographic 3D printing
Martinez, P. R., Goyanes, A., Basit, A. W., & Gaisford, S. (2017) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2017.09.003 · Cited by 274
3D printed multi-compartment capsular devices for two-pulse oral drug delivery
Maroni, A., Melocchi, A., Parietti, F., Foppoli, A., Zema, L., & Gazzaniga, A. (2017) · Journal of Controlled Release · doi:10.1016/j.jconrel.2017.10.008 · Cited by 268
Multimechanism oral dosage forms fabricated by three dimensional printing™
Rowe, C. W., Katstra, W. E., Palazzolo, R. D., Giritlioglu, B., Teung, P., & Cima, M. J. (2000) · Journal of Controlled Release · doi:10.1016/s0168-3659(99)00224-2 · Cited by 255
Holländer, J., Genina, N., Jukarainen, H., Khajeheian, M., Rosling, A., Mäkilä, E., & Sandler, N. (2016) · Journal of Pharmaceutical Sciences · doi:10.1016/j.xphs.2015.12.012 · Cited by 252
Patient acceptability of 3D printed medicines
Goyanes, A., Scarpa, M., Kamlow, M., Gaisford, S., Basit, A. W., & Orlu, M. (2017) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2017.07.064 · Cited by 246
Fabrication of low cost soft tissue prostheses with the desktop 3D printer
He, Y., Xue, G.-H., & Fu, J.-Z. (2014) · Scientific Reports · doi:10.1038/srep06973 · Cited by 243
3D printed orodispersible films with Aripiprazole
Jamróz, W., Kurek, M., Łyszczarz, E., Szafraniec, J., Knapik-Kowalczuk, J., Syrek, K., Paluch, M., & Jachowicz, R. (2017) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2017.05.052 · Cited by 233
Self-citationThree-Dimensional Printing Techniques
Demirak, O., Gokyer, S., Ergene, E., & Yilgor, P. (2025) · Biological and Medical Physics, Biomedical Engineering · doi:10.1007/978-3-031-90966-5_3 · Cited by 225
Preparation and investigation of novel gastro-floating tablets with 3D extrusion-based printing
Li, Q., Guan, X., Cui, M., Zhu, Z., Chen, K., Wen, H., Jia, D., Hou, J., Xu, W., Yang, X., et al. (2018) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2017.10.037 · Cited by 222
3D printing of vaginal rings with personalized shapes for controlled release of progesterone
Fu, J., Yu, X., & Jin, Y. (2018) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2018.01.036 · Cited by 222
3D extrusion printing of high drug loading immediate release paracetamol tablets
Khaled, S. A., Alexander, M. R., Wildman, R. D., Wallace, M. J., Sharpe, S., Yoo, J., & Roberts, C. J. (2018) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2018.01.024 · Cited by 211
3D printing of high drug loaded dosage forms using thermoplastic polyurethanes
Verstraete, G., Samaro, A., Grymonpré, W., Vanhoorne, V., Van Snick, B., Boone, M. N., Hellemans, T., Van Hoorebeke, L., Remon, J. P., & Vervaet, C. (2018) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2017.12.002 · Cited by 209
3D printing of tablets using inkjet with UV photoinitiation
Clark, E. A., Alexander, M. R., Irvine, D. J., Roberts, C. J., Wallace, M. J., Sharpe, S., Yoo, J., Hague, R. J. M., Tuck, C. J., & Wildman, R. D. (2017) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2017.06.085 · Cited by 207
Genina, N., Boetker, J. P., Colombo, S., Harmankaya, N., Rantanen, J., & Bohr, A. (2017) · Journal of Controlled Release · doi:10.1016/j.jconrel.2017.10.003 · Cited by 204
3D printed nervous system on a chip
Johnson, B. N., Lancaster, K. Z., Hogue, I. B., Meng, F., Kong, Y. L., Enquist, L. W., & McAlpine, M. C. (2016) · Lab on a Chip · doi:10.1039/c5lc01270h · Cited by 191
3D Printed Programmable Release Capsules
Gupta, M. K., Meng, F., Johnson, B. N., Kong, Y. L., Tian, L., Yeh, Y.-W., Masters, N., Singamaneni, S., & McAlpine, M. C. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b01688 · Cited by 190
Arafat, B., Wojsz, M., Isreb, A., Forbes, R. T., Isreb, M., Ahmed, W., Arafat, T., & Alhnan, M. A. (2018) · European Journal of Pharmaceutical Sciences · doi:10.1016/j.ejps.2018.03.019 · Cited by 186
A micro-spherical heart pump powered by cultured cardiomyocytes
Tanaka, Y., Sato, K., Shimizu, T., Yamato, M., Okano, T., & Kitamori, T. (2007) · Lab Chip · doi:10.1039/b612082b · Cited by 182
A preliminary investigation into the development of 3-D printing of prosthetic sockets
Herbert, N., Simpson, D., Spence, W. D., & Ion, W. (2005) · The Journal of Rehabilitation Research and Development · doi:10.1682/jrrd.2004.08.0134 · Cited by 181
Yang, Y., Wang, H., Li, H., Ou, Z., & Yang, G. (2018) · European Journal of Pharmaceutical Sciences · doi:10.1016/j.ejps.2018.01.005 · Cited by 181
Kempin, W., Franz, C., Koster, L.-C., Schneider, F., Bogdahn, M., Weitschies, W., & Seidlitz, A. (2017) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2017.02.014 · Cited by 180
Three-Dimensional Printing of Medicinal Products and the Challenge of Personalized Therapy
Zema, L., Melocchi, A., Maroni, A., & Gazzaniga, A. (2017) · Journal of Pharmaceutical Sciences · doi:10.1016/j.xphs.2017.03.021 · Cited by 174
Novel drug delivery devices for providing linear release profiles fabricated by 3DP
Yu, D.-G., Branford-White, C., Ma, Z.-H., Zhu, L.-M., Li, X.-Y., & Yang, X.-L. (2009) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2008.12.008 · Cited by 170
Biohybrid thin films for measuring contractility in engineered cardiovascular muscle
Alford, P. W., Feinberg, A. W., Sheehy, S. P., & Parker, K. K. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.01.079 · Cited by 168
Printed Drug-Delivery Systems for Improved Patient Treatment
Sandler, N., & Preis, M. (2016) · Trends in Pharmacological Sciences · doi:10.1016/j.tips.2016.10.002 · Cited by 164
Huang, W., Zheng, Q., Sun, W., Xu, H., & Yang, X. (2007) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2007.02.021 · Cited by 159
Modifying release characteristics from 3D printed drug-eluting products
Boetker, J. P., Water, J. J., Aho, J., Arnfast, L., Bohr, A., & Rantanen, J. (2016) · European Journal of Pharmaceutical Sciences · doi:10.1016/j.ejps.2016.03.013 · Cited by 158
Direct 3D printing of silicone facial prostheses: A preliminary experience in digital workflow
Unkovskiy, A., Spintzyk, S., Brom, J., Huettig, F., & Keutel, C. (2018) · Journal of Prosthetic Dentistry · doi:10.1016/j.prosdent.2017.11.007 · Cited by 150
Enabling personalized implant and controllable biosystem development through 3D printing
Nagarajan, N., Dupret‐Bories, A., Karabulut, E., Zorlutuna, P., & Vrana, N. E. (2018) · Biotechnology Advances · doi:10.1016/j.biotechadv.2018.02.004 · Cited by 141
Wu, W., Zheng, Q., Guo, X., Sun, J., & Liu, Y. (2009) · Biomedical Materials · doi:10.1088/1748-6041/4/6/065005 · Cited by 139
Li, Q., Wen, H., Jia, D., Guan, X., Pan, H., Yue, Y., Yu, S., Zhu, Z., Xiang, R., & Pan, W. (2017) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2017.03.066 · Cited by 135
Feinberg, A. W. (2015) · Annual Review of Biomedical Engineering · doi:10.1146/annurev-bioeng-071114-040632 · Cited by 134
Zajicek, A., Fossler, M. J., Barrett, J. S., Worthington, J. H., Ternik, R. L., Charkoftaki, G., Lum, S. K., Breitkreutz, J., Baltezor, M., Macheras, P. E., et al. (2013) · The AAPS Journal · doi:10.1208/s12248-013-9511-5 · Cited by 128
Yu, D., Shen, X., Branford-White, C. J., Zhu, L., White, K., & Xiang, Y. (2009) · Journal of Pharmacy and Pharmacology · doi:10.1211/jpp.61.03.0006 · Cited by 128
Witowski, J. S., Pędziwiatr, M., Major, P., & Budzynski, A. Z. (2017) · International Journal of Computer Assisted Radiology and Surgery · doi:10.1007/s11548-017-1527-3 · Cited by 113
Analysis of 3D Prints by X-ray Computed Microtomography and Terahertz Pulsed Imaging
Markl, D., Zeitler, J. A., Rasch, C., Michaelsen, M. H., Müllertz, A., Rantanen, J., Rades, T., & Bøtker, J. (2017) · Pharmaceutical Research · doi:10.1007/s11095-016-2083-1 · Cited by 96
Qi, S., & Craig, D. Q. M. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.01.003 · Cited by 92
Richey, R. H., Hughes, C., Craig, J. V., Shah, U. U., Ford, J. L., Barker, C. E., Peak, M., Nunn, A. J., & Turner, M. A. (2017) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2016.12.032 · Cited by 90
Valverde, I. (2016) · Revista Española de Cardiología · doi:10.1016/j.recesp.2016.09.043 · Cited by 86
Valverde, I. (2017) · Revista Española de Cardiología (English Edition) · doi:10.1016/j.rec.2017.01.012 · Cited by 83
Use of 3D Printing for Medical Education Models in Transplantation Medicine: a Critical Review
O’Brien, E. K., Wayne, D. B., Barsness, K. A., McGaghie, W. C., & Barsuk, J. H. (2016) · Current Transplantation Reports · doi:10.1007/s40472-016-0088-7 · Cited by 66
3D Printed Pericardium Hydrogels To Promote Wound Healing in Vascular Applications
Bracaglia, L. G., Messina, M. J., Winston, S., Kuo, C., Lerman, M. J., & Fisher, J. P. (2017) · Biomacromolecules · doi:10.1021/acs.biomac.7b01165 · Cited by 64
Ammonia as a case study for the spontaneous ionization of a simple hydrogen-bonded compound
Palasyuk, T., Troyan, I., Eremets, M., Drozd, V., Medvedev, S., Zaleski–Ejgierd, P., Magos–Palasyuk, E., Wang, H., Bonev, S. A., Dudenko, D., et al. (2014) · Nature Communications · doi:10.1038/ncomms4460 · Cited by 58
Melhem, M. R., Park, J., Knapp, L., Reinkensmeyer, L., Cvetkovic, C., Flewellyn, J., Lee, M. K., Jensen, T. W., Bashir, R., Kong, H., et al. (2017) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00176 · Cited by 55
Wu, W., Zheng, Q., Guo, X., & Huang, W. (2009) · Journal of Wuhan University of Technology-Mater Sci Ed · doi:10.1007/s11595-009-6977-1 · Cited by 44
del Junco, M., Okhunov, Z., Yoon, R., Khanipour, R., Juncal, S., Abedi, G., Lusch, A., & Landman, J. (2014) · Journal of Endourology · doi:10.1089/end.2014.0280 · Cited by 39
Novel Uses for Three-Dimensional Printing in Congenital Heart Disease
Loke, T., Krieger, A., Sable, C., & Olivieri, L. (2016) · Current Pediatrics Reports · doi:10.1007/s40124-016-0099-y · Cited by 21
Unintended consequences for patients of future personalized pharmacoprinting
Kaae, S. S., Lind, J., Genina, N., & Sporrong, S. K. (2018) · International Journal of Clinical Pharmacy · doi:10.1007/s11096-018-0596-x · Cited by 21
Creating three dimensional models of Alzheimer’s disease
Marks, M., Alexander, A. E., Matsumoto, J. Y., Matsumoto, J. M. S., Morris, J. M., Petersen, R. C., Jack, C. R., Oishi, T., & Jones, D. T. (2017) · 3D Printing in Medicine · doi:10.1186/s41205-017-0020-5 · Cited by 12
Mechanics of Biological Nanotechnology
Phillips, R., Purohit, P. K., & Kondev, J. (2006) · Springer eBooks · doi:10.1007/3-540-28248-3_14 · Cited by 7
Cited by
An overview of modern metal additive manufacturing technology
Armstrong, M., Mehrabi, H., & Naveed, N. (2022) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2022.10.060 · Cited by 549
3D printing technology; methods, biomedical applications, future opportunities and trends
Bozkurt, Y., & Karayel, E. (2021) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2021.07.050 · Cited by 384
3D printing: Principles and pharmaceutical applications of selective laser sintering
Awad, A., Fina, F., Goyanes, A., Gaisford, S., & Basit, A. W. (2020) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2020.119594 · Cited by 371
Azad, M. A., Olawuni, D., Kimbell, G., Badruddoza, A. Z. M., Hossain, M. S., & Sultana, T. (2020) · Pharmaceutics · doi:10.3390/pharmaceutics12020124 · Cited by 356
Recent advances of additive manufacturing in implant fabrication – A review
Mobarak, M. H., Islam, M. A., Hossain, N., Al Mahmud, M. Z., Rayhan, M. T., Nishi, N. J., & Chowdhury, M. A. (2023) · Applied Surface Science Advances · doi:10.1016/j.apsadv.2023.100462 · Cited by 307
Metadata
- Authors
- Jamróz, W., Szafraniec, J., Kurek, M., & Jachowicz, R.
- Venue
- Pharmaceutical Research
- Published
- 2018-07-11
- Volume
- 35
- Issue
- 9
- Pages
- 176-176
- ISSN
- 0724-8741 (ISSN-L)
- 1573-904X
- OpenAlex
- W2868238225
- Cited by
- 707
- References
- 94
- FWCI
- 28.12
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.