The DOI matches its Crossref record; 116 of the 116 references it cites were found in a registry or an index.
Additive manufacturing of biodegradable metals: Current research status and future perspectives
Abstract
The combination of biodegradable metals and additive manufacturing (AM) leads to a revolutionary change of metal implants in many aspects including materials, design, manufacturing, and clinical applications. The AM of nondegradable metals such as titanium and CoCr alloys has proven to be a tremendous success in clinical applications. The AM of biodegradable metals including magnesium (Mg), iron (Fe), and zinc (Zn) is still in its infancy, although much progress has been made in the research field. Element loss and porosity are common processing problems for AM of biodegradable metals like Zn and Mg, which are mainly caused by evaporation during melting under a high-energy beam. The resulting formation quality and properties are closely related to material, design, and processing, making AM of biodegradable metals a typical interdisciplinary subject involving biomaterials, mechanical engineering, and medicine. This work reviews the state of research and future perspective on AM of biodegradable metals from extensive viewpoints such as material, processing, formation quality, design, microstructure, and properties. Effects of powder properties and processing parameters on formation quality are characterized in detail. The microstructure and metallurgical defects encountered in the AM parts are described. Mechanical and biodegradable properties of AM samples are introduced. Design principles and potential applications of biodegradable metal implants produced by AM are discussed. Finally, current research status is summarized together with some proposed future perspectives for advancing knowledge about AM of biodegradable metals. STATEMENT OF SIGNIFICANCE: Rapid development of research and applications on biodegradable metals and additive manufacturing (AM) has been made in recent years. Customized geometric shapes of medical metals with porous structure can be realized accurately and efficiently by laser powder bed fusion (L-PBF), which is beneficial to achieve reliable stress conduction and balanced properties. This review introduces the development history and current status of AM of biodegradable metals and then critically surveys L-PBF of Mg-, Fe-, and Zn-based metals from multiple viewpoints including materials, processing, formation quality, structural design, microstructure, and mechanical and biological properties. The present findings are summarized together with some proposed future challenges for advancing AM of biodegradable metals into real clinical applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Additive manufacturing of metallic components – Process, structure and properties
DebRoy, T., Wei, H. L., Zuback, J. S., Mukherjee, T., Elmer, J. W., Milewski, J. O., Beese, A. M., Wilson-Heid, A., De, A., & Zhang, W. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.10.001 · Cited by 8,805
The Deformation and Ageing of Mild Steel: III Discussion of Results
Hall, E. O. (1951) · Proceedings of the Physical Society. Section B · doi:10.1088/0370-1301/64/9/303 · Cited by 7,872
Additive manufacturing of metals
Herzog, D., Seyda, V., Wycisk, E., & Emmelmann, C. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.07.019 · Cited by 4,759
Porous scaffold design for tissue engineering
Hollister, S. J. (2005) · Nature Materials · doi:10.1038/nmat1421 · Cited by 3,969
Laser additive manufacturing of metallic components: materials, processes and mechanisms
Gu, D. D., Meiners, W., Wissenbach, K., & Poprawe, R. (2012) · International Materials Reviews · doi:10.1179/1743280411y.0000000014 · Cited by 3,197
Self-citationZheng, Y. F., Gu, X. N., & Witte, F. (2014) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2014.01.001 · Cited by 2,436
Self-citationReview of selective laser melting: Materials and applications
Yap, C. Y., Chua, C. K., Dong, Z. L., Liu, Z. H., Zhang, D. Q., Loh, L. E., & Sing, S. L. (2015) · Applied Physics Reviews · doi:10.1063/1.4935926 · Cited by 2,353
Wang, X., Xu, S., Zhou, S., Xu, W., Leary, M., Choong, P., Qian, M., Brandt, M., & Xie, Y. M. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.01.012 · Cited by 2,121
The history of biodegradable magnesium implants: A review☆
Witte, F. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.02.028 · Cited by 1,860
Selective laser melting of iron-based powder
Kruth, J. P., Froyen, L., Van Vaerenbergh, J., Mercelis, P., Rombouts, M., & Lauwers, B. (2004) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2003.11.051 · Cited by 1,550
Scaffolds for bone tissue engineering: state of the art and new perspectives
Roseti, L., Parisi, V., Petretta, M., Cavallo, C., Desando, G., Bartolotti, I., & Grigolo, B. (2017) · Materials Science and Engineering: C · doi:10.1016/j.msec.2017.05.017 · Cited by 1,320
Zhang, Y., Xu, J., Ruan, Y. C., Yu, M. K., O'Laughlin, M., Wise, H., Chen, D., Tian, L., Shi, D., Wang, J., et al. (2016) · Nature Medicine · doi:10.1038/nm.4162 · Cited by 1,051
Self-citationSelective laser melting of biocompatible metals for rapid manufacturing of medical parts
Vandenbroucke, B., & Kruth, J. (2007) · Rapid Prototyping Journal · doi:10.1108/13552540710776142 · Cited by 981
Zhao, D., Witte, F., Lu, F., Wang, J., Li, J., & Qin, L. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2016.10.017 · Cited by 945
Sing, S. L., An, J., Yeong, W. Y., & Wiria, F. E. (2016) · Journal of Orthopaedic Research · doi:10.1002/jor.23075 · Cited by 942
Zinc Exhibits Ideal Physiological Corrosion Behavior for Bioabsorbable Stents
Bowen, P. K., Drelich, J., & Goldman, J. (2013) · Advanced Materials · doi:10.1002/adma.201300226 · Cited by 928
Fabrication of NiTi through additive manufacturing: A review
Elahinia, M., Shayesteh Moghaddam, N., Taheri Andani, M., Amerinatanzi, A., Bimber, B. A., & Hamilton, R. F. (2016) · Progress in Materials Science · doi:10.1016/j.pmatsci.2016.08.001 · Cited by 890
Bobbert, F. S. L., Lietaert, K., Eftekhari, A. A., Pouran, B., Ahmadi, S. M., Weinans, H., & Zadpoor, A. A. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.02.024 · Cited by 873
Surface texture metrology for metal additive manufacturing: a review
Townsend, A., Senin, N., Blunt, L., Leach, R. K., & Taylor, J. S. (2016) · Precision Engineering · doi:10.1016/j.precisioneng.2016.06.001 · Cited by 743
Hollister, S. J., Maddox, R. D., & Taboas, J. M. (2002) · Biomaterials · doi:10.1016/s0142-9612(02)00148-5 · Cited by 715
Yan, C., Hao, L., Hussein, A., Young, P., & Raymont, D. (2014) · Materials & Design · doi:10.1016/j.matdes.2013.10.027 · Cited by 622
Spierings, A. B., Herres, N., & Levy, G. (2011) · Rapid Prototyping Journal · doi:10.1108/13552541111124770 · Cited by 614
A review of laser welding techniques for magnesium alloys
Cao, X. J., Jahazi, M., Immarigeon, J.-P., & Wallace, W. E. (2005) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2005.06.068 · Cited by 610
Microstructural development during solidification of stainless steel alloys
Elmer, J. W., Allen, S. M., & Eagar, T. W. (1989) · Metallurgical Transactions A · doi:10.1007/bf02650298 · Cited by 600
Venezuela, J., & Dargusch, M. S. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.01.035 · Cited by 588
Mechanical properties of porous titanium compacts prepared by powder sintering
Oh, I.-H., Nomura, N., Masahashi, N., & Hanada, S. (2003) · Scripta Materialia · doi:10.1016/j.scriptamat.2003.08.018 · Cited by 569
Zinc-based alloys for degradable vascular stent applications
Mostaed, E., Sikora-Jasinska, M., Drelich, J. W., & Vedani, M. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.03.005 · Cited by 565
Fundamental Theory of Biodegradable Metals—Definition, Criteria, and Design
Liu, Y., Zheng, Y., Chen, X., Yang, J., Pan, H., Chen, D., Wang, L., Zhang, J., Zhu, D., Wu, S., et al. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201805402 · Cited by 519
Self-citationBone tissue regeneration: the role of scaffold geometry
Zadpoor, A. A. (2015) · Biomaterials Science · doi:10.1039/c4bm00291a · Cited by 518
Development of biodegradable Zn-1X binary alloys with nutrient alloying elements Mg, Ca and Sr
Li, H. F., Xie, X. H., Zheng, Y. F., Cong, Y., Zhou, F. Y., Qiu, K. J., Wang, X., Chen, S. H., Huang, L., Tian, L., et al. (2015) · Scientific Reports · doi:10.1038/srep10719 · Cited by 515
Self-citationMg and Mg alloys: How comparable are in vitro and in vivo corrosion rates? A review
Sanchez, A. H. M., Luthringer, B. J. C., Feyerabend, F., & Willumeit, R. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.11.048 · Cited by 503
Long-term clinical study and multiscale analysis of in vivo biodegradation mechanism of Mg alloy
Lee, J.-W., Han, H.-S., Han, K.-J., Park, J., Jeon, H., Ok, M.-R., Seok, H.-K., Ahn, J.-P., Lee, K. E., Lee, D.-H., et al. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1518238113 · Cited by 480
Design and properties of 3D scaffolds for bone tissue engineering
Gómez, S., Vlad, M. D., López, J., & Fernández, E. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2016.06.032 · Cited by 477
Gaynor, A. T., & Guest, J. K. (2016) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-016-1551-x · Cited by 476
Mostaed, E., Sikora-Jasinska, M., Mostaed, A., Loffredo, S., Demir, A. G., Previtali, B., Mantovani, D., Beanland, R., & Vedani, M. (2016) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2016.03.018 · Cited by 475
Design guidelines for laser additive manufacturing of lightweight structures in TiAl6V4
Kranz, J., Herzog, D., & Emmelmann, C. (2015) · Journal of Laser Applications · doi:10.2351/1.4885235 · Cited by 470
Current trends in the design of scaffolds for computer-aided tissue engineering
Giannitelli, S. M., Accoto, D., Trombetta, M., & Rainer, A. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.10.024 · Cited by 451
Hamu, G. B., Eliezer, D., & Wagner, L. (2009) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2008.01.084 · Cited by 451
Mechanical behavior of regular open-cell porous biomaterials made of diamond lattice unit cells
Ahmadi, S. M., Campoli, G., Amin Yavari, S., Sajadi, B., Wauthle, R., Schrooten, J., Weinans, H., & Zadpoor, A. A. (2014) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2014.02.003 · Cited by 442
Additively manufactured porous tantalum implants
Wauthle, R., van der Stok, J., Amin Yavari, S., Van Humbeeck, J., Kruth, J.-P., Zadpoor, A. A., Weinans, H., Mulier, M., & Schrooten, J. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.12.003 · Cited by 417
Scaffold Design and Manufacturing: From Concept to Clinic
Hollister, S. J. (2009) · Advanced Materials · doi:10.1002/adma.200802977 · Cited by 408
Additively manufactured biodegradable porous magnesium
Li, Y., Zhou, J., Pavanram, P., Leeflang, M. A., Fockaert, L. I., Pouran, B., Tümer, N., Schröder, K.-U., Mol, J. M. C., Weinans, H., et al. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.12.008 · Cited by 396
Simchi, A., & Pohl, H. (2003) · Materials Science and Engineering: A · doi:10.1016/s0921-5093(03)00341-1 · Cited by 377
Kadkhodapour, J., Montazerian, H., Darabi, A., Anaraki, A. P., Ahmadi, S. M., ZADPOOR, A. A., & Schmauder, S. (2015) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2015.06.012 · Cited by 376
Grain size distribution effects on the corrosion behaviour of materials
Gollapudi, S. (2012) · Corrosion Science · doi:10.1016/j.corsci.2012.04.040 · Cited by 374
Yasa, E., Deckers, J., & Kruth, J. (2011) · Rapid Prototyping Journal · doi:10.1108/13552541111156450 · Cited by 371
Kubásek, J., Vojtěch, D., Jablonská, E., Pospíšilová, I., Lipov, J., & Ruml, T. (2016) · Materials Science and Engineering: C · doi:10.1016/j.msec.2015.08.015 · Cited by 360
Haude, M., Ince, H., Abizaid, A., Toelg, R., Lemos, P. A., von Birgelen, C., Christiansen, E. H., Wijns, W., Neumann, F.-J., Kaiser, C., et al. (2016) · The Lancet · doi:10.1016/s0140-6736(15)00447-x · Cited by 349
The Prospects of Zinc as a Structural Material for Biodegradable Implants—A Review Paper
Katarivas Levy, G., Goldman, J., & Aghion, E. (2017) · Metals · doi:10.3390/met7100402 · Cited by 340
Wei, K., Gao, M., Wang, Z., & Zeng, X. (2014) · Materials Science and Engineering: A · doi:10.1016/j.msea.2014.05.092 · Cited by 330
Adachi, T., Osako, Y., Tanaka, M., Hojo, M., & Hollister, S. J. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.02.039 · Cited by 316
Pu, Z., Song, G.-L., Yang, S., Outeiro, J. C., Dillon, O. W., Puleo, D. A., & Jawahir, I. S. (2012) · Corrosion Science · doi:10.1016/j.corsci.2011.12.018 · Cited by 303
Additively manufactured biodegradable porous iron
Li, Y., Jahr, H., Lietaert, K., Pavanram, P., Yilmaz, A., Fockaert, L. I., Leeflang, M. A., Pouran, B., Gonzalez-Garcia, Y., Weinans, H., et al. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.07.011 · Cited by 299
Porous magnesium-based scaffolds for tissue engineering
Yazdimamaghani, M., Razavi, M., Vashaee, D., Moharamzadeh, K., Boccaccini, A. R., & Tayebi, L. (2017) · Materials Science and Engineering: C · doi:10.1016/j.msec.2016.11.027 · Cited by 298
Micro-alloying with Mn in Zn–Mg alloy for future biodegradable metals application
Liu, X., Sun, J., Zhou, F., Yang, Y., Chang, R., Qiu, K., Pu, Z., Li, L., & Zheng, Y. (2016) · Materials & Design · doi:10.1016/j.matdes.2015.12.128 · Cited by 292
Self-citationYang, H., Qu, X., Lin, W., Wang, C., Zhu, D., Dai, K., & Zheng, Y. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.03.007 · Cited by 284
Self-citationEffects of processing parameters on properties of selective laser melting Mg–9%Al powder mixture
Zhang, B., Liao, H., & Coddet, C. (2012) · Materials & Design · doi:10.1016/j.matdes.2011.06.061 · Cited by 280
Defects-dictated tensile properties of selective laser melted Ti-6Al-4V
Voisin, T., Calta, N. P., Khairallah, S. A., Forien, J., Balogh, L., Cunningham, R., Rollett, A. D., & Wang, Y. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.08.004 · Cited by 277
Updates on the research and development of absorbable metals for biomedical applications
Hermawan, H. (2018) · Progress in Biomaterials · doi:10.1007/s40204-018-0091-4 · Cited by 260
Novel processing of iron–manganese alloy-based biomaterials by inkjet 3-D printing
Chou, D.-T., Wells, D., Hong, D., Lee, B., Kuhn, H., & Kumta, P. N. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.04.016 · Cited by 259
Metals for bone implants. Part 1. Powder metallurgy and implant rendering
Andani, M. T., Shayesteh Moghaddam, N., Haberland, C., Dean, D., Miller, M. J., & Elahinia, M. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.06.025 · Cited by 258
Todai, M., Nakano, T., Liu, T., Yasuda, H. Y., Hagihara, K., Cho, K., Ueda, M., & Takeyama, M. (2016) · Additive manufacturing · doi:10.1016/j.addma.2016.11.001 · Cited by 255
Effects of secondary phase and grain size on the corrosion of biodegradable Mg–Zn–Ca alloys
Lu, Y., Bradshaw, A. R., Chiu, Y. L., & Jones, I. P. (2015) · Materials Science and Engineering: C · doi:10.1016/j.msec.2014.12.049 · Cited by 245
Selective Laser Melting of Magnesium and Magnesium Alloy Powders: A Review
Manakari, V., Parande, G., & Gupta, M. (2016) · Metals · doi:10.3390/met7010002 · Cited by 241
Jiang, B., Xiang, Q., Atrens, A., Song, J., & Pan, F. (2017) · Corrosion Science · doi:10.1016/j.corsci.2017.08.004 · Cited by 241
Metal Alloys for Fusion‐Based Additive Manufacturing
Zhang, D., Sun, S., Qiu, D., Gibson, M. A., Dargusch, M. S., Brandt, M., Qian, M., & Easton, M. A. (2018) · Advanced Engineering Materials · doi:10.1002/adem.201700952 · Cited by 236
Additive manufacturing of cardiovascular CoCr stents by selective laser melting
Demir, A. G., & Previtali, B. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.01.091 · Cited by 235
Bagherifard, S., Hickey, D. J., Fintová, S., Pastorek, F., Fernandez-Pariente, I., Bandini, M., Webster, T. J., & Guagliano, M. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.11.032 · Cited by 235
Grasso, M., Demir, A. G., Previtali, B., & Colosimo, B. M. (2018) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2017.07.001 · Cited by 231
Recent advances in biodegradation controls over Mg alloys for bone fracture management: A review
Song, M.-S., Zeng, R.-C., Ding, Y.-F., Li, R. W., Easton, M., Cole, I., Birbilis, N., & Chen, X.-B. (2019) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2018.10.008 · Cited by 230
Limmahakhun, S., Oloyede, A., Sitthiseripratip, K., Xiao, Y., & Yan, C. (2017) · Materials & Design · doi:10.1016/j.matdes.2016.11.090 · Cited by 229
Microstructure and tensile properties of iron parts fabricated by selective laser melting
Song, B., Dong, S., Deng, S., Liao, H., & Coddet, C. (2014) · Optics & Laser Technology · doi:10.1016/j.optlastec.2013.09.017 · Cited by 219
Zumdick, N. A., Jauer, L., Kersting, L. C., Kutz, T. N., Schleifenbaum, J. H., & Zander, D. (2019) · Materials Characterization · doi:10.1016/j.matchar.2018.11.011 · Cited by 215
Self-citationJin, W., Wu, G., Feng, H., Wang, W., Zhang, X., & Chu, P. K. (2015) · Corrosion Science · doi:10.1016/j.corsci.2015.01.049 · Cited by 211
Microstructure and mechanical properties of selective laser melted magnesium
Ng, C. C., Savalani, M. M., Lau, M. L., & Man, H. C. (2011) · Applied Surface Science · doi:10.1016/j.apsusc.2011.03.004 · Cited by 208
Dumas, M., Terriault, P., & Brailovski, V. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.02.021 · Cited by 206
Xiao, C., Wang, L., Ren, Y., Sun, S., Zhang, E., Yan, C., Liu, Q., Sun, X., Shou, F., Duan, J., et al. (2018) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2018.01.006 · Cited by 204
Song, B., Dong, S., Liu, Q., Liao, H., & Coddet, C. (2014) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2013.08.085 · Cited by 189
Moravej, M., Purnama, A., Fiset, M., Couet, J., & Mantovani, D. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.01.008 · Cited by 184
Wen, P., Voshage, M., Jauer, L., Chen, Y., Qin, Y., Poprawe, R., & Schleifenbaum, J. H. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.05.057 · Cited by 179
Self-citationOptimization of scaffold design for bone tissue engineering: A computational and experimental study
Dias, M. R., Guedes, J. M., Flanagan, C. L., Hollister, S. J., & Fernandes, P. R. (2014) · Medical Engineering & Physics · doi:10.1016/j.medengphy.2014.02.010 · Cited by 171
Weißmann, V., Bader, R., Hansmann, H., & Laufer, N. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.01.095 · Cited by 170
A combined strategy to enhance the properties of Zn by laser rapid solidification and laser alloying
Yang, Y., Yuan, F., Gao, C., Feng, P., Xue, L., He, S., & Shuai, C. (2018) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2018.03.018 · Cited by 168
Microstructure design of biodegradable scaffold and its effect on tissue regeneration
Chen, Y., Zhou, S., & Li, Q. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2011.03.064 · Cited by 164
Revival of pure titanium for dynamically loaded porous implants using additive manufacturing
Wauthle, R., Ahmadi, S. M., Amin Yavari, S., Mulier, M., Zadpoor, A. A., Weinans, H., Van Humbeeck, J., Kruth, J.-P., & Schrooten, J. (2015) · Materials Science and Engineering: C · doi:10.1016/j.msec.2015.05.001 · Cited by 163
Bagheri, Z. S., Melancon, D., Liu, L., Johnston, R. B., & Pasini, D. (2017) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2016.04.041 · Cited by 162
Wen, P., Jauer, L., Voshage, M., Chen, Y., Poprawe, R., & Schleifenbaum, J. H. (2018) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2018.03.007 · Cited by 152
Self-citationCoelho, P. G., Fernandes, P. R., Rodrigues, H. C., Cardoso, J. B., & Guedes, J. M. (2009) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2009.01.020 · Cited by 147
Plaaß, C., von Falck, C., Ettinger, S., Sonnow, L., Calderone, F., Weizbauer, A., Reifenrath, J., Claaßen, L., Waizy, H., Daniilidis, K., et al. (2017) · Journal of Orthopaedic Science · doi:10.1016/j.jos.2017.11.005 · Cited by 147
Processability of pure Zn and pure Fe by SLM for biodegradable metallic implant manufacturing
Montani, M., Demir, A. G., Mostaed, E., Vedani, M., & Previtali, B. (2017) · Rapid Prototyping Journal · doi:10.1108/rpj-08-2015-0100 · Cited by 143
Kong, D., Ni, X., Dong, C., Zhang, L., Man, C., Cheng, X., & Li, X. (2018) · Materials Letters · doi:10.1016/j.matlet.2018.09.152 · Cited by 135
Wen, P., Qin, Y., Chen, Y., Voshage, M., Jauer, L., Poprawe, R., & Schleifenbaum, J. H. (2018) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2018.09.065 · Cited by 135
Self-citation3D Printed Fe Scaffolds with HA Nanocoating for Bone Regeneration
Yang, C., Huan, Z., Wang, X., Wu, C., & Chang, J. (2018) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.7b00885 · Cited by 133
Layer manufacturing of magnesium and its alloy structures for future applications
Ng, C. C., Savalani, M. M., Man, H. C., & Gibson, I. (2010) · Virtual and Physical Prototyping · doi:10.1080/17452751003718629 · Cited by 131
Laser rapid solidification improves corrosion behavior of Mg-Zn-Zr alloy
Shuai, C., Yang, Y., Wu, P., Lin, X., Liu, Y., Zhou, Y., Feng, P., Liu, X., & Peng, S. (2016) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2016.09.019 · Cited by 130
Wegener, B., Sievers, B., Utzschneider, S., et al. (2011) · Materials Science and Engineering B · doi:10.1016/j.mseb.2011.04.017 · Cited by 129
Selective laser melting of pure Zn with high density for biodegradable implant manufacturing
Demir, A. G., Monguzzi, L., & Previtali, B. (2017) · Additive manufacturing · doi:10.1016/j.addma.2017.03.004 · Cited by 125
Resorbable bone fixation alloys, forming, and post-fabrication treatments
Ibrahim, H., Esfahani, S. N., Poorganji, B., Dean, D., & Elahinia, M. (2016) · Materials Science and Engineering C · doi:10.1016/j.msec.2016.09.069 · Cited by 118
Liu, C., Zhang, M. J., & Chen, C. (2017) · Materials Science and Engineering A · doi:10.1016/j.msea.2017.07.031 · Cited by 118
Experimental Investigation on Selective Laser Melting of Bulk Net-Shape Pure Magnesium
Hu, D., Wang, Y., Zhang, D., Hao, L., Jiang, J., Li, Z., & Chen, Y. (2015) · Materials and Manufacturing Processes · doi:10.1080/10426914.2015.1025963 · Cited by 99
Mechanics of additively manufactured biomaterials
ZADPOOR, A. A. (2017) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2017.03.018 · Cited by 94
Matena, J., Petersen, S., Gieseke, M., Kampmann, A., Teske, M., Beyerbach, M., Escobar, H. M., Haferkamp, H., Gellrich, N., & Nolte, I. J. A. (2015) · International Journal of Molecular Sciences · doi:10.3390/ijms16047478 · Cited by 92
Design of experiments approach in AZ31 powder selective laser melting process optimization
Pawlak, A., Rosienkiewicz, M., & Chlebus, E. (2016) · Archives of Civil and Mechanical Engineering · doi:10.1016/j.acme.2016.07.007 · Cited by 86
Liu, Y., Zheng, Y., & Hayes, B. K. (2017) · Science China Materials · doi:10.1007/s40843-017-9023-9 · Cited by 82
Self-citationCoelho, P. G., Hollister, S. J., Flanagan, C. L., & Fernandes, P. R. (2015) · Medical Engineering & Physics · doi:10.1016/j.medengphy.2015.01.004 · Cited by 77
Shuai, C., Xue, L., Gao, C., Yang, Y., Peng, S., & Zhang, Y. (2018) · Virtual and Physical Prototyping · doi:10.1080/17452759.2018.1458991 · Cited by 76
Regulating Degradation Behavior by Incorporating Mesoporous Silica for Mg Bone Implants
Yang, Y., Guo, X., He, C., Gao, C., & Shuai, C. (2018) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.8b00020 · Cited by 74
Leitz, K.-H., Grohs, C., Singer, P. L., Tabernig, B., Plankensteiner, A., Kestler, H., & Sigl, L. S. (2017) · International Journal of Refractory Metals and Hard Materials · doi:10.1016/j.ijrmhm.2017.11.034 · Cited by 66
Selective Laser Melting of Magnesium and Magnesium Alloys
Gieseke, M., Noelke, C., Kaierle, S., Wesling, V., & Haferkamp, H. (2013) · Springer eBooks · doi:10.1007/978-3-319-48150-0_11 · Cited by 55
The microstructure, mechanical properties and degradation behavior of laser-melted Mg Sn alloys
Zhou, Y., Wu, P., Yang, Y., Gao, D., Feng, P., Gao, C., Wu, H. P., Liu, Y., Bian, H., & Shuai, C. (2016) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2016.06.068 · Cited by 55
Microstructure Evolution and Biodegradation Behavior of Laser Rapid Solidified Mg–Al–Zn Alloy
He, C., Bin, S., Wu, P., Gao, C., Feng, P., Yang, Y., Liu, L., Zhou, Y., Zhao, M., Yang, S. L., et al. (2017) · Metals · doi:10.3390/met7030105 · Cited by 53
Saito, E., Liu, Y., Migneco, F., & Hollister, S. J. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.03.028 · Cited by 49
Shuai, C., He, C., Feng, P., Guo, W., Gao, C., Wu, P., Yang, Y., & Bin, S. (2017) · Virtual and Physical Prototyping · doi:10.1080/17452759.2017.1408918 · Cited by 42
Schultze, J. W., Davepon, B., Kármán, F. H., Rosenkranz, C., Schreiber, A., & Voigt, O. (2004) · Corrosion Engineering Science and Technology The International Journal of Corrosion Processes and Corrosion Control · doi:10.1179/147842204225016813 · Cited by 37
Effect of keyhole geometry and dynamics in zero-gap laser welding of zinc-coated steel sheets
Kim, J., Oh, S., & Ki, H. (2016) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2016.01.028 · Cited by 28
Chen, J., Wu, P., Wang, Q., Yang, Y., Peng, S., Zhou, Y., Shuai, C., & Deng, Y. (2016) · Metals · doi:10.3390/met6110259 · Cited by 18
Cited by
Chen, L.-Y., Liang, S.-X., Liu, Y., & Zhang, L.-C. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2021.100648 · Cited by 603
Mg bone implant: Features, developments and perspectives
Yang, Y., He, C., Dianyu, E., Yang, W., Qi, F., Xie, D., Shen, L., Peng, S., & Shuai, C. (2020) · Materials & Design · doi:10.1016/j.matdes.2019.108259 · Cited by 433
Applications of Magnesium and Its Alloys: A Review
Tan, J., & Ramakrishna, S. (2021) · Applied Sciences · doi:10.3390/app11156861 · Cited by 350
Recent advances of additive manufacturing in implant fabrication – A review
Mobarak, M. H., Islam, M. A., Hossain, N., Al Mahmud, M. Z., Rayhan, M. T., Nishi, N. J., & Chowdhury, M. A. (2023) · Applied Surface Science Advances · doi:10.1016/j.apsadv.2023.100462 · Cited by 307
Additively manufactured biodegradable porous iron
Li, Y., Jahr, H., Lietaert, K., Pavanram, P., Yilmaz, A., Fockaert, L. I., Leeflang, M. A., Pouran, B., Gonzalez-Garcia, Y., Weinans, H., et al. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.07.011 · Cited by 299
Metadata
- Authors
- Qin, Y., Wen, P., Guo, H., Xia, D., Zheng, Y., Jauer, L., Poprawe, R., Voshage, M., & Schleifenbaum, J. H.
- Venue
- Acta Biomaterialia
- Publisher
- Elsevier BV
- Published
- 2019-10
- Volume
- 98
- Pages
- 3-22
- ISSN
- 1742-7061 (ISSN-L)
- OpenAlex
- W2941027415
- Cited by
- 303
- References
- 116
- FWCI
- 17.72
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.