The DOI matches its Crossref record; 141 of the 141 references it cites were found in a registry or an index.
Binder jetting: A review of process, materials, and methods
Abstract
Abstract Binder Jet printing is an additive manufacturing technique that dispenses liquid binding agent on powder to form a two-dimensional pattern on a layer. The layers are stacked to build a physical article. Binder Jetting (BJ) can be adapted to almost any powder with high production rates and the BJ process utilizes a broad range of technologies including printing tehniques, powder deposition, dynamic binder/powder interaction, and post-processing methods. A wide variety of materials including polymers, metals, and ceramics have been processed successfully with Binder Jet. However, developing printing and post-processing methods that maximize part performance is a remaining challenge. This article presents a broad review of technologies and approaches that have been applied in Binder Jet printing and points towards opportunities for future advancement.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Strukov, D. B., Snider, G. S., Stewart, D. R., & Williams, R. S. (2008) · Nature · doi:10.1038/nature06932 · Cited by 11,828
Polymers for 3D Printing and Customized Additive Manufacturing
Ligon, S. C., Liska, R., Stampfl, J., Gurr, M., & Mülhaupt, R. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00074 · Cited by 3,741
High-Resolution Inkjet Printing of All-Polymer Transistor Circuits
Sirringhaus, H., Kawase, T., Friend, R. H., Shimoda, T., Inbasekaran, M., Wu, W., & Woo, E. P. (2000) · Science · doi:10.1126/science.290.5499.2123 · Cited by 3,311
Gibson, I., Rosen, D., & Stucker, B. (2015) · doi:10.1007/978-1-4939-2113-3 · Cited by 3,299
Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing
Gibson, I., Rosen, D. W., & Stucker, B. (2010) · National University of Singapore · doi:10.1007/978-1-4419-1120-9 · Cited by 2,969
German, R. M. (1996) · CERN Document Server (European Organization for Nuclear Research) · Cited by 2,502
Inkjet Printing of Polymers: State of the Art and Future Developments
de Gans, B. ‐., Duineveld, P. C., & Schubert, U. S. (2004) · Advanced Materials · doi:10.1002/adma.200300385 · Cited by 1,906
Review: liquid phase sintering
German, R. M., Suri, P., & Park, S. J. (2009) · Journal of Materials Science · doi:10.1007/s10853-008-3008-0 · Cited by 1,444
German, R. M. (1985) · Springer eBooks · doi:10.1007/978-1-4899-3599-1 · Cited by 1,298
Inkjet-Printed Line Morphologies and Temperature Control of the Coffee Ring Effect
Soltman, D., & Subramanian, V. (2008) · Langmuir · doi:10.1021/la7026847 · Cited by 1,152
Sintering Crystalline Solids. I. Intermediate and Final State Diffusion Models
COBLE, R. L. (1961) · Journal of Applied Physics · doi:10.1063/1.1736107 · Cited by 1,152
Densification during Sintering in the Presence of a Liquid Phase. I. Theory
Kingery, W. D. (1959) · Journal of Applied Physics · doi:10.1063/1.1735155 · Cited by 1,026
Sintering: Densification, Grain Growth and Microstructure
Kang, S. L. (2005) · Cited by 1,006
Processing techniques for functionally graded materials
Kieback, B., Neubrand, A., & Riedel, H. (2003) · Materials Science and Engineering: A · doi:10.1016/s0921-5093(03)00578-1 · Cited by 979
Additive Manufacturing of Ceramic‐Based Materials
Travitzky, N., Bonet, A., Dermeik, B., Fey, T., Filbert‐Demut, I., Schlier, L., Schlordt, T., & Greil, P. (2014) · Advanced Engineering Materials · doi:10.1002/adem.201400097 · Cited by 878
Three-Dimensional Printing: Rapid Tooling and Prototypes Directly from a CAD Model
Sachs, E., Cima, M., & Cornie, J. (1990) · CIRP Annals · doi:10.1016/s0007-8506(07)61035-x · Cited by 871
3D printing of composite calcium phosphate and collagen scaffolds for bone regeneration
Inzana, J. A., Olvera, D., Fuller, S. M., Kelly, J. P., Graeve, O. A., Schwarz, E. M., Kates, S. L., & Awad, H. A. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2014.01.064 · Cited by 840
Shirazi, S. F. S., Gharehkhani, S., Mehrali, M., Yarmand, H., Metselaar, H. S. C., Adib Kadri, N., & Osman, N. A. A. (2015) · Science and Technology of Advanced Materials · doi:10.1088/1468-6996/16/3/033502 · Cited by 755
Progress and Trends in Ink-jet Printing Technology
Le, H. P. (1998) · Journal of Imaging Science and Technology · doi:10.2352/j.imagingsci.technol.1998.42.1.art00007 · Cited by 720
Random close packing of hard spheres and disks
Berryman, J. G. (1983) · Physical Review A · doi:10.1103/physreva.27.1053 · Cited by 692
Fayazfar, H., Salarian, M., Rogalsky, A., Sarker, D., Russo, P., Paserin, V., & Toyserkani, E. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.02.018 · Cited by 665
Scaffold development using 3D printing with a starch-based polymer
Lam, C. X. F., Mo, X. M., Teoh, S. H., & Hutmacher, D. W. (2002) · Materials Science and Engineering: C · doi:10.1016/s0928-4931(02)00012-7 · Cited by 614
Initial Sintering of Alumina and Hematite
COBLE, R. L. (1958) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1958.tb13519.x · Cited by 591
Grading Aggregates - I. - Mathematical Relations for Beds of Broken Solids of Maximum Density
Furnas, C. C. (1931) · Industrial & Engineering Chemistry · doi:10.1021/ie50261a017 · Cited by 571
3D printing of modified-release aminosalicylate (4-ASA and 5-ASA) tablets
Goyanes, A., Buanz, A. B. M., Hatton, G. B., Gaisford, S., & Basit, A. W. (2015) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2014.12.003 · Cited by 570
A review of process development steps for new material systems in three dimensional printing (3DP)
Utela, B., Storti, D., Anderson, R., & Ganter, M. (2008) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2009.03.002 · Cited by 548
Stow, C. D., & Hadfield, M. G. (1981) · Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences · doi:10.1098/rspa.1981.0002 · Cited by 530
Additive Manufacturing of Metallic Materials: A Review
Zhang, Y., Wu, L., Guo, X., Kane, S., Deng, Y., Jung, Y.-G., Lee, J.-H., & Zhang, J. (2018) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-017-2747-y · Cited by 521
Random Packing of Equal and Unequal Spheres in Two and Three Dimensions
VISSCHER, W. M., & BOLSTERLI, M. (1972) · Nature · doi:10.1038/239504a0 · Cited by 501
3D printing technologies for electrochemical energy storage
Zhang, F., Wei, M., Viswanathan, V. V., Swart, B., Shao, Y., Wu, G., & Zhou, C. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.08.037 · Cited by 494
Coexistence and transition between Cassie and Wenzel state on pillared hydrophobic surface
Koishi, T., Yasuoka, K., Fujikawa, S., Ebisuzaki, T., & Zeng, X. C. (2009) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0902027106 · Cited by 481
Small‐scale free surface flows with breakup: Drop formation and emerging applications
Basaran, O. A. (2002) · AIChE Journal · doi:10.1002/aic.690480902 · Cited by 478
Kim, S. S., Utsunomiya, H., Koski, J. A., Wu, B. M., Cima, M. J., Sohn, J., Mukai, K., Griffith, L. G., & Vacanti, J. P. (1998) · Annals of Surgery · doi:10.1097/00000658-199807000-00002 · Cited by 451
A Review on 3D Printing for Customized Food Fabrication
Sun, J., Peng, Z., Zhou, W., Fuh, J. Y. H., Hong, G. S., & Chiu, A. (2015) · Procedia Manufacturing · doi:10.1016/j.promfg.2015.09.057 · Cited by 407
Orally Fast Disintegrating Tablets: Developments, Technologies, Taste-Masking and Clinical Studies
Fu, Y., Yang, S., Jeong, S. H., Kimura, S., & Park, K. (2004) · Critical Reviews in Therapeutic Drug Carrier Systems · doi:10.1615/critrevtherdrugcarriersyst.v21.i6.10 · Cited by 389
3D Printing of Calcium Phosphate Ceramics for Bone Tissue Engineering and Drug Delivery
Trombetta, R., Inzana, J. A., Schwarz, E. M., Kates, S. L., & Awad, H. A. (2017) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1678-3 · Cited by 377
Particle-based simulation of powder application in additive manufacturing
Parteli, E. J. R., & Pöschel, T. (2016) · Powder Technology · doi:10.1016/j.powtec.2015.10.035 · Cited by 362
Solid free-form fabrication of drug delivery devices
Wu, B. M., Borland, S. W., Giordano, R. A., Cima, L. G., Sachs, E. M., & Cima, M. J. (1996) · Journal of Controlled Release · doi:10.1016/0168-3659(95)00173-5 · Cited by 361
Effects of layer thickness and binder saturation level parameters on 3D printing process
Vaezi, M., & Chua, C. K. (2011) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-010-2821-1 · Cited by 341
Frontiers of 3D Printing/Additive Manufacturing: from Human Organs to Aircraft Fabrication
Murr, L. E. (2016) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2016.08.011 · Cited by 329
Park, A., Wu, B., & Griffith, L. G. (1998) · Journal of Biomaterials Science, Polymer Edition · doi:10.1163/156856298x00451 · Cited by 322
Bai, Y., Wagner, G., & Williams, C. B. (2017) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4036640 · Cited by 314
A review on quality control in additive manufacturing
Kim, H., Lin, Y., & Tseng, T.-L. B. (2018) · Rapid Prototyping Journal · doi:10.1108/rpj-03-2017-0048 · Cited by 308
An, B. W., Kim, K., Lee, H., Kim, S., Shim, Y., Lee, D., Song, J. Y., & Park, J. (2015) · Advanced Materials · doi:10.1002/adma.201502092 · Cited by 306
Sintering of advanced materials
Fang, Z. Z. (2010) · Woodhead Publishing Limited eBooks · doi:10.1533/9781845699949 · Cited by 306
Drop Penetration into Porous Powder Beds
Hapgood, K. P., Litster, J. D., Biggs, S. R., & Howes, T. (2002) · Journal of Colloid and Interface Science · doi:10.1006/jcis.2002.8527 · Cited by 305
The effect of particle size distribution on packing density
Sohn, H. Y., & Moreland, C. (1968) · The Canadian Journal of Chemical Engineering · doi:10.1002/cjce.5450460305 · Cited by 298
Meier, C., Weissbach, R., Weinberg, J., Wall, W. A., & Hart, A. J. (2019) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2018.10.037 · Cited by 298
Experimental Study of the Porosity and Permeability of Clastic Sediments
Fraser, H. J. (1935) · The Journal of Geology · doi:10.1086/624388 · Cited by 296
Farzadi, A., Solati-Hashjin, M., Asadi-Eydivand, M., & Abu Osman, N. A. (2014) · PLoS ONE · doi:10.1371/journal.pone.0108252 · Cited by 284
An exploration of binder jetting of copper
Bai, Y., & Williams, C. B. (2015) · Rapid Prototyping Journal · doi:10.1108/rpj-12-2014-0180 · Cited by 270
Particle shape effects on fabric of granular random packing
Zhao, S., Zhang, N., Zhou, X., & Zhang, L. (2017) · Powder Technology · doi:10.1016/j.powtec.2016.12.094 · Cited by 268
Gonzalez, J. A., Mireles, J., Lin, Y., & Wicker, R. B. (2016) · Ceramics International · doi:10.1016/j.ceramint.2016.03.079 · Cited by 265
3D printing technique applied to rapid casting
Bassoli, E., Gatto, A., Iuliano, L., & Grazia Violante, M. (2007) · Rapid Prototyping Journal · doi:10.1108/13552540710750898 · Cited by 253
Nandwana, P., Elliott, A. M., Siddel, D., Merriman, A., Peter, W. H., & Babu, S. S. (2017) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2016.12.002 · Cited by 249
Experiments on Random Packings of Ellipsoids
Man, W., Donev, A., Stillinger, F. H., Sullivan, M. T., Russel, W. B., Heeger, D., Inati, S., Torquato, S., & Chaikin, P. M. (2005) · Physical Review Letters · doi:10.1103/physrevlett.94.198001 · Cited by 248
Wu, H., Cheng, Y., Liu, W., He, R., Zhou, M., Wu, S., Song, X., & Chen, Y. (2016) · Ceramics International · doi:10.1016/j.ceramint.2016.08.024 · Cited by 248
3D printing for rapid sand casting—A review
Upadhyay, M., Sivarupan, T., & El Mansori, M. (2017) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2017.07.017 · Cited by 244
Zhou, Z., Buchanan, F., Mitchell, C., & Dunne, N. (2014) · Materials Science and Engineering: C · doi:10.1016/j.msec.2014.01.027 · Cited by 241
Mostafaei, A., Rodriguez De Vecchis, P., Nettleship, I., & Chmielus, M. (2019) · Materials & Design · doi:10.1016/j.matdes.2018.11.051 · Cited by 236
Three-Dimensional Printing Techniques
Demirak, O., Gokyer, S., Ergene, E., & Yilgor, P. (2025) · Biological and Medical Physics, Biomedical Engineering · doi:10.1007/978-3-031-90966-5_3 · Cited by 225
Butscher, A., Bohner, M., Roth, C., Ernstberger, A., Heuberger, R., Doebelin, N., Rudolf von Rohr, P., & Müller, R. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.08.027 · Cited by 224
Fabrication of barium titanate by binder jetting additive manufacturing technology
Gaytan, S. M., Cadena, M. A., Karim, H., Delfin, D., Lin, Y., Espalin, D., MacDonald, E., & Wicker, R. B. (2015) · Ceramics International · doi:10.1016/j.ceramint.2015.01.108 · Cited by 221
Nozzleless droplet formation with focused acoustic beams
Elrod, S. A., Hadimioglu, B., Khuri-Yakub, B. T., Rawson, E. G., Richley, E., Quate, C. F., Mansour, N. N., & Lundgren, T. S. (1989) · Journal of Applied Physics · doi:10.1063/1.342663 · Cited by 220
Porous magnesium/PLGA composite scaffolds for enhanced bone regeneration following tooth extraction
Brown, A., Zaky, S., Ray, H., & Sfeir, C. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.09.008 · Cited by 217
Chen, H., & Zhao, Y. F. (2016) · Rapid Prototyping Journal · doi:10.1108/rpj-11-2014-0149 · Cited by 204
Wu, C., Fan, W., Zhou, Y., Luo, Y., Gelinsky, M., Chang, J., & Xiao, Y. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm30566f · Cited by 202
Process development toward full-density stainless steel parts with binder jetting printing
Do, T., Kwon, P., & Shin, C. S. (2017) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2017.04.006 · Cited by 201
Energy and Material Flow Analysis of Binder-jetting Additive Manufacturing Processes
Meteyer, S., Xu, X., Perry, N., & Zhao, Y. F. (2014) · Procedia CIRP · doi:10.1016/j.procir.2014.06.030 · Cited by 192
Computer simulation of random packing of hard spheres
Nolan, G. T., & Kavanagh, P. E. (1992) · Powder Technology · doi:10.1016/0032-5910(92)88021-9 · Cited by 191
Improvement of flow and bulk density of pharmaceutical powders using surface modification
Jallo, L. J., Ghoroi, C., Gurumurthy, L., et al. (2011) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2011.12.012 · Cited by 178
Real time observation of binder jetting printing process using high-speed X-ray imaging
Parab, N. D., Barnes, J. E., Zhao, C., Cunningham, R. W., Fezzaa, K., Rollett, A. D., & Sun, T. (2019) · Scientific Reports · doi:10.1038/s41598-019-38862-7 · Cited by 174
Modelling of rearrangement processes in liquid phase sintering
Huppmann, W. J., & Riegger, H. (1975) · Acta Metallurgica · doi:10.1016/0001-6160(75)90010-3 · Cited by 162
Miyanaji, H., Zhang, S., & Yang, L. (2017) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2017.09.001 · Cited by 160
Effect of printing speed on quality of printed parts in Binder Jetting Process
Miyanaji, H., Momenzadeh, N., & Yang, L. (2017) · Additive manufacturing · doi:10.1016/j.addma.2017.12.008 · Cited by 156
Holland, S., Foster, T., MacNaughtan, W., & Tuck, C. J. (2017) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2017.06.008 · Cited by 155
Ma, J., & Lim, L. C. (2002) · Journal of the European Ceramic Society · doi:10.1016/s0955-2219(02)00009-2 · Cited by 153
Mullarney, M. P., Beach, L., Davé, R. N., Langdon, B. A., Polizzi, M. A., & Blackwood, D. O. (2011) · Powder Technology · doi:10.1016/j.powtec.2011.06.008 · Cited by 151
A review of ceramic sintering and suggestions on reducing sintering temperatures
Kuang, X., Carotenuto, G., & Nicolais, L. (1997) · Advanced Performance Materials · doi:10.1023/a:1008621020555 · Cited by 147
Binder-jet powder-bed additive manufacturing (3D printing) of thick graphene-based electrodes
Azhari, A., Marzbanrad, E., Yilman, D., Toyserkani, E., & Pope, M. A. (2017) · Carbon · doi:10.1016/j.carbon.2017.04.028 · Cited by 146
3D printing high density ceramics using binder jetting with nanoparticle densifiers
Kunchala, P., & Kappagantula, K. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.06.009 · Cited by 146
Optimization of Binder Jetting Using Taguchi Method
Shrestha, S., & Manogharan, G. P. (2017) · JOM · doi:10.1007/s11837-016-2231-4 · Cited by 145
3D Printing of Pharmaceuticals
Basit, A. W., Gaisford, S., & Publishing, S. I. (2018) · AAPS advances in the pharmaceutical sciences series · doi:10.1007/978-3-319-90755-0 · Cited by 135
On contact numbers in random rod packings
Wouterse, A., Luding, S., & Philipse, A. P. (2009) · Granular Matter · doi:10.1007/s10035-009-0126-6 · Cited by 131
A model for liquid phase sintering
Svoboda, J., Riedel, H., & Gaebel, R. (1996) · Acta Materialia · doi:10.1016/1359-6454(95)00440-8 · Cited by 127
Binder jetting additive manufacturing with a particle-free metal ink as a binder precursor
Bai, Y., & Williams, C. B. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.03.027 · Cited by 126
Effects of Hot Isostatic Pressing on Copper Parts Fabricated via Binder Jetting
Kumar, A. Y., Bai, Y., Eklund, A., & Williams, C. B. (2017) · Procedia Manufacturing · doi:10.1016/j.promfg.2017.07.084 · Cited by 124
Shanjani, Y., Croos, J. N. A. D., Pilliar, R. M., et al. (2010) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.31610 · Cited by 121
Microstructural and mechanical characterization of injection molded 718 superalloy powders
Özgün, Ö., Gülsoy, H. Ö., Yılmaz, R., & Fındık, F. (2013) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2013.04.042 · Cited by 119
Mostafaei, A., Vecchis, P. R. D., Stevens, E. L., & Chmielus, M. (2018) · Acta Materialia · doi:10.1016/j.actamat.2018.05.047 · Cited by 115
Lu, Q. Y., & Chee How, W. O. N. G. (2017) · Virtual and Physical Prototyping · doi:10.1080/17452759.2017.1357319 · Cited by 114
Improved surface finish in 3D printing using bimodal powder distribution
Lanzetta, M., & Sachs, E. M. (2003) · Rapid Prototyping Journal · doi:10.1108/13552540310477463 · Cited by 112
Direct inkjet printing of Si3N4: Characterization of ink, green bodies and microstructure
Cappi, B., Özkol, E., Ebert, J., & Telle, R. (2008) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2008.03.004 · Cited by 112
Zhou, J., Zhang, Y., & Chen, J. K. (2009) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.3123324 · Cited by 110
Vibratory Compaction: I, Compaction of Spherical Shapes
Ayer, J. E., & SOPPET, F. E. (1965) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1965.tb14708.x · Cited by 105
Binder jetting of a complex-shaped metal partial denture framework
Mostafaei, A., Stevens, E. L., Ference, J. J., Schmidt, D. E., & Chmielus, M. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.02.014 · Cited by 103
Wheat, E., Vlasea, M., Hinebaugh, J., & Metcalfe, C. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.06.038 · Cited by 103
Salehi, M., Maleksaeedi, S., Sapari, M. A. B., Nai, M. L. S., Meenashisundaram, G. K., & Gupta, M. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.107683 · Cited by 102
Comparative Study of 3D Printing Technologies for Rapid Casting of Aluminium Alloy
Gill, S. S., & Kaplas, M. (2009) · Materials and Manufacturing Processes · doi:10.1080/10426910902997571 · Cited by 101
Bai, Y., Wall, C. E., Pham, H., Esker, A. R., & Williams, C. B. (2018) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4041624 · Cited by 97
Description of agglomerate growth
Schaafsma, S. H., Vonk, P., Segers, P., & Kossen, N. W. F. (1998) · Powder Technology · doi:10.1016/s0032-5910(97)03399-8 · Cited by 96
Binder-Jet Printing of Fine Stainless Steel Powder with Varied Final Density
Ziaee, M., Tridas, E., & Crane, N. B. (2016) · JOM · doi:10.1007/s11837-016-2177-6 · Cited by 96
Self-citationCharacterization and evaluation of a PMMA‐based 3D printing process
Polzin, C., Spath, S., & Seitz, H. (2013) · Rapid Prototyping Journal · doi:10.1108/13552541311292718 · Cited by 94
Tailoring green and sintered density of pure iron parts using binder jetting additive manufacturing
Rishmawi, I., Salarian, M., & Vlasea, M. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.10.015 · Cited by 91
Capillary forces between spheres during agglomeration and liquid phase sintering
Hwang, K. S., German, R. M., & Lenel, F. V. (1987) · Metallurgical Transactions A · doi:10.1007/bf02646216 · Cited by 82
Daneyko, A., Khirevich, S., Höltzel, A., Seidel‐Morgenstern, A., & Tallarek, U. (2011) · Journal of Chromatography A · doi:10.1016/j.chroma.2011.09.039 · Cited by 79
Three-dimensional simulation of micrometer-sized droplet impact and penetration into the powder bed
Tan, H. (2016) · Chemical Engineering Science · doi:10.1016/j.ces.2016.07.015 · Cited by 79
3D-printed shell-truss sand mold for aluminum castings
Shangguan, H., Kang, J., Deng, C., Hu, Y., & Huang, T. (2017) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2017.05.010 · Cited by 78
Li, L. G., Zhuo, H. X., Zhu, J., & Kwan, A. K. H. (2018) · Powder Technology · doi:10.1016/j.powtec.2018.10.005 · Cited by 78
Effect of powder characteristics on parts fabricated via binder jetting process
Miyanaji, H., Momenzadeh, N., & Yang, L. (2018) · Rapid Prototyping Journal · doi:10.1108/rpj-03-2018-0069 · Cited by 75
Rojas-Nastrucci, E. A., Nussbaum, J. T., Crane, N. B., & Weller, T. M. (2017) · IEEE Transactions on Microwave Theory and Techniques · doi:10.1109/tmtt.2017.2730839 · Cited by 74
Self-citationSalehi, M., Maleksaeedi, S., Nai, M. L. S., Meenashisundaram, G. K., Goh, M. H., & Gupta, M. (2018) · Acta Materialia · doi:10.1016/j.actamat.2018.11.061 · Cited by 74
Cao, S., Qiu, Y., Wei, X., et al. (2015) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2015.01.016 · Cited by 73
Drops on Microstructured Surfaces Coated with Hydrophilic Polymers: Wenzel's Model and Beyond
Dorrer, C., & Rühe, J. (2008) · Langmuir · doi:10.1021/la7029938 · Cited by 71
Holland, S., Tuck, C. J., & Foster, T. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.07.064 · Cited by 69
Binder Jetting Additive Manufacturing of Ceramics: A Literature Review
Du, W., Ren, X., Ma, C., & Pei, Z. (2017) · Volume 14: Emerging Technologies; Materials: Genetics to Structures; Safety Engineering and Risk Analysis · doi:10.1115/imece2017-70344 · Cited by 67
3D printing of porcelain by layerwise slurry deposition
Lima, P., Zocca, A., Acchar, W., & Günster, J. (2018) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2018.03.014 · Cited by 64
Iveson, S. M., Holt, S., & Biggs, S. (2004) · International Journal of Mineral Processing · doi:10.1016/j.minpro.2004.01.007 · Cited by 63
Anestiev, L. A., & Froyen, L. (1999) · Journal of Applied Physics · doi:10.1063/1.371321 · Cited by 61
Analysis of Capillary Forces in Liquid‐Phase Sintering of Jagged Particles
Cahn, J. W., & Heady, R. B. (1970) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1970.tb12142.x · Cited by 58
Sheydaeian, E., & Toyserkani, E. (2017) · Composites Part B Engineering · doi:10.1016/j.compositesb.2017.11.035 · Cited by 53
Enhanced sintering treatments for ferrous powders
German, R. M., & D'ANGELO, K. (1984) · International Materials Reviews · doi:10.1179/imr.1984.29.1.249 · Cited by 49
Kwon, O.-H., & Messing, G. L. (1991) · Acta Metallurgica et Materialia · doi:10.1016/0956-7151(91)90176-2 · Cited by 46
Layer-wise spatial modeling of porosity in additive manufacturing
Liu, J. P., Liu, C., Bai, Y., Rao, P., Williams, C. B., & Kong, Z. (2018) · IISE Transactions · doi:10.1080/24725854.2018.1478169 · Cited by 46
Improving flowability of cohesive particles by partial coating on the surfaces
Xu, C. C., Zhang, H., & Zhu, J. (2009) · The Canadian Journal of Chemical Engineering · doi:10.1002/cjce.20179 · Cited by 44
Additively Manufactured Full-Density Stainless Steel 316L With Binder Jet Printing
Do, T., Bauder, T. J., Suen, H., et al. (2018) · doi:10.1115/msec2018-6681 · Cited by 41
Bourell, D. L. (2018) · JOM · doi:10.1007/s11837-018-3206-4 · Cited by 41
Characterization of wet powder flowability by shear cell measurements and compaction curves
Althaus, T. O., & Windhab, E. J. (2011) · Powder Technology · doi:10.1016/j.powtec.2011.09.007 · Cited by 40
Güngör, F., & Ay, N. (2018) · Ceramics International · doi:10.1016/j.ceramint.2018.03.086 · Cited by 34
Vasireddi, R., & Basu, B. (2015) · Rapid Prototyping Journal · doi:10.1108/rpj-12-2013-0123 · Cited by 33
Du, W., Ren, X., Chen, Y., Ma, C., Radović, M., & Pei, Z. (2018) · ASME International Manufacturing Science and Engineering Conference (MSEC) · doi:10.1115/msec2018-6651 · Cited by 33
Phenomenological study and modelling of wick debinding
Somasundram, I. M., Cendrowicz, A. M., Wilson, D. I., & Johns, M. L. (2008) · Chemical Engineering Science · doi:10.1016/j.ces.2008.04.040 · Cited by 32
Pandit, J. K., Wang, X. S., & Rhodes, M. J. (2006) · Chemical Engineering Science · doi:10.1016/j.ces.2006.08.013 · Cited by 30
Wang, Y., Li, X., Li, C.-C., Yang, M., & Wei, Q. (2015) · Journal of Materials Science · doi:10.1007/s10853-015-9050-9 · Cited by 24
Stoyanov, P., Andre, K., Prichard, P., Yao, M., & Gey, C. (2016) · Procedia CIRP · doi:10.1016/j.procir.2016.02.358 · Cited by 23
3D screen printing for the fabrication of small intricate Ti-6Al-4V parts
Jurisch, M., Studnitzky, T., Andersen, O., & Kieback, B. (2015) · Powder Metallurgy · doi:10.1179/0032589915z.000000000255 · Cited by 20
Delannay, F. (2005) · The Philosophical Magazine A Journal of Theoretical Experimental and Applied Physics · doi:10.1080/14786430500318860 · Cited by 18
Development of translucent and strong three dimensional printing models
Suwanprateeb, J., & Suwanpreuk, W. (2009) · Rapid Prototyping Journal · doi:10.1108/13552540910925063 · Cited by 18
Mitigating Distortion During Sintering of Binder Jet Printed Ceramics
Grant, L. O., Alameen, M. B., Carazzone, J. R., Higgs, C. F., & Cordero, Z. C. (2018) · doi:10.26153/tsw/17004 · Cited by 18
Chen, C., Nagao, S., Sugahara, T., Zhang, H., Jiu, J., Suganuma, K., Iwashige, T., Sugiura, K., & Tsuruta, K. (2017) · International Conference on Electronics Packaging (ICEP) · doi:10.23919/icep.2017.7939340 · Cited by 7
Integration of binder jet additive manufacturing technology into the metal casting industry
Lynch, P. C., Beniwal, C., & Wilck, J. H., IV (2017) · Cited by 5
Cited by
Additive manufacturing of advanced ceramic materials
Lakhdar, Y., Tuck, C., Binner, J., Terry, A., & Goodridge, R. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100736 · Cited by 857
Nazir, A., Gokcekaya, O., Md Masum Billah, K., Ertugrul, O., Jiang, J., Sun, J., & Hussain, S. (2023) · Materials & Design · doi:10.1016/j.matdes.2023.111661 · Cited by 773
Vafadar, A., Guzzomi, F., Rassau, A., & Hayward, K. (2021) · Applied Sciences · doi:10.3390/app11031213 · Cited by 748
Recent Progress on Polymer Materials for Additive Manufacturing
Tan, L. J., Zhu, W., & Zhou, K. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202003062 · Cited by 740
Multi‐Material 3D and 4D Printing: A Survey
Rafiee, M., Farahani, R. D., & Therriault, D. (2020) · Advanced Science · doi:10.1002/advs.201902307 · Cited by 662
Metadata
- Authors
- Ziaee, M., & Crane, N. B.
- Venue
- Additive Manufacturing
- Publisher
- Elsevier BV
- Published
- 2019-08
- Volume
- 28
- Pages
- 781-801
- ISSN
- 2214-7810 (ISSN-L)
- 2214-8604
- OpenAlex
- W2952298560
- Cited by
- 819
- References
- 141
- FWCI
- 37.26
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.