The DOI matches its Crossref record; 67 of the 67 references it cites were found in a registry or an index.
Direct 3D bioprinting of perfusable vascular constructs using a blend bioink
Open accessAbstract
Despite the significant technological advancement in tissue engineering, challenges still exist towards the development of complex and fully functional tissue constructs that mimic their natural counterparts. To address these challenges, bioprinting has emerged as an enabling technology to create highly organized three-dimensional (3D) vascular networks within engineered tissue constructs to promote the transport of oxygen, nutrients, and waste products, which can hardly be realized using conventional microfabrication techniques. Here, we report the development of a versatile 3D bioprinting strategy that employs biomimetic biomaterials and an advanced extrusion system to deposit perfusable vascular structures with highly ordered arrangements in a single-step process. In particular, a specially designed cell-responsive bioink consisting of gelatin methacryloyl (GelMA), sodium alginate, and 4-arm poly(ethylene glycol)-tetra-acrylate (PEGTA) was used in combination with a multilayered coaxial extrusion system to achieve direct 3D bioprinting. This blend bioink could be first ionically crosslinked by calcium ions followed by covalent photocrosslinking of GelMA and PEGTA to form stable constructs. The rheological properties of the bioink and the mechanical strengths of the resulting constructs were tuned by the introduction of PEGTA, which facilitated the precise deposition of complex multilayered 3D perfusable hollow tubes. This blend bioink also displayed favorable biological characteristics that supported the spreading and proliferation of encapsulated endothelial and stem cells in the bioprinted constructs, leading to the formation of biologically relevant, highly organized, perfusable vessels. These characteristics make this novel 3D bioprinting technique superior to conventional microfabrication or sacrificial templating approaches for fabrication of the perfusable vasculature. We envision that our advanced bioprinting technology and bioink formulation may also have significant potentials in engineering large-scale vascularized tissue constructs towards applications in organ transplantation and repair.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“In this context, the fast development of new fabrication techniques, such as 3D bioprinting, has led to a general decline in the cost and the specialized work involved in fabricating these chips [65 -67].”
From 3D In Vitro Model (R)evolution: Unveiling Tumor–Stroma Interactions (2021) · cites this paper as [65]
Experimental — accuracy not yet measuredThe cited source says what the claim attributes to it.
In the citing paper
“To this end, considerable efforts were made in developing hydrogel-based inks or printing techniques to enhance 3D stability and shape fidelity, such as printing multimaterial inks with combined nozzle system24, 25, photo-crosslinkable hydrogels17, 26, 27, adding viscosifiers28–30, or printing in sacrificial supporting materials31–33.”
From Fibre-infused gel scaffolds guide cardiomyocyte alignment in 3D-printed ventricles (2023) · cites this paper as [24]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
Hydrogels for biomedical applications
Hoffman, A. S. (2002) · Advanced Drug Delivery Reviews · doi:10.1016/s0169-409x(01)00239-3 · Cited by 4,864
Hydrogels for biomedical applications
Hoffman, A. S. (2012) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2012.09.010 · Cited by 3,396
Synthesis, properties, and biomedical applications of gelatin methacryloyl (GelMA) hydrogels
Yue, K., Trujillo-de Santiago, G., Alvarez, M. M., Tamayol, A., Annabi, N., & Khademhosseini, A. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.08.045 · Cited by 3,146
Self-citationHydrogels in regenerative medicine
Slaughter, B. V., Khurshid, S. S., Fisher, O. Z., Khademhosseini, A., & Peppas, N. A. (2009) · Advanced Materials · doi:10.1002/adma.200802106 · Cited by 2,703
Self-citationA 3D bioprinting system to produce human-scale tissue constructs with structural integrity
Kang, H.-W., Lee, S. J., Ko, I. K., Kengla, C., Yoo, J. J., & Atala, A. (2016) · Nature Biotechnology · doi:10.1038/nbt.3413 · Cited by 2,622
Cell-laden microengineered gelatin methacrylate hydrogels
Nichol, J. W., Koshy, S. T., Bae, H., Hwang, C. M., Yamanlar, S., & Khademhosseini, A. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.03.064 · Cited by 2,377
Self-citationHyaluronic Acid Hydrogels for Biomedical Applications
Burdick, J. A., & Prestwich, G. D. (2011) · Advanced Materials · doi:10.1002/adma.201003963 · Cited by 2,150
3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs
Kolesky, D. B., Truby, R. L., Gladman, A. S., Busbee, T. A., Homan, K. A., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201305506 · Cited by 2,102
Rapid casting of patterned vascular networks for perfusable engineered three-dimensional tissues
Miller, J. S., Stevens, K. R., Yang, M. T., Baker, B. M., Nguyen, D.-H. T., Cohen, D. M., Toro, E., Chen, A. A., Galie, P. A., Yu, X., et al. (2012) · Nature Materials · doi:10.1038/nmat3357 · Cited by 1,917
Research works printed but not linked: 1
- Kolesky, 2014, 3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs, Adv. Mater., 26, 3124, 10.1002/adma.201305506 · DOI · Paper page
Cited by
Sorted by citations
Items 501–600 of 919
Ink-structing the future of vascular tissue engineering: a review of the physiological bioink design
Synofzik, J., Heene, S., Jonczyk, R., & Blume, C. A. (2024) · Bio-Design and Manufacturing · doi:10.1007/s42242-024-00270-w · Cited by 31
Salih, T., Caputo, M., & Ghorbel, M. T. (2024) · Biomolecules · doi:10.3390/biom14070861 · Cited by 27
Biofabrication and biomanufacturing in Ireland and the UK
Murphy, J. F., Lavelle, M., Asciak, L., Burdis, R., Levis, H. J., Ligorio, C., McGuire, J., Polleres, M., Smith, P. O., Tullie, L., et al. (2024) · Bio-Design and Manufacturing · doi:10.1007/s42242-024-00316-z · Cited by 29
Building better bone: The weaving of biologic and engineering strategies for managing bone loss
Schwartz, A., Schenker, M. L., Ahn, J., & Willett, N. J. (2017) · Journal of Orthopaedic Research® · doi:10.1002/jor.23592 · Cited by 27
Mini-review: advances in 3D bioprinting of vascularized constructs
Bova, L., Billi, F., & Cimetta, E. (2020) · Biology Direct · doi:10.1186/s13062-020-00273-4 · Cited by 29
Zhou, Y. X., Fan, Y., Chen, Z. X., Yue, Z., & Wallace, G. G. (2021) · Biofabrication · doi:10.1088/1758-5090/ac2ef8 · Cited by 27
Tissue-engineered heart chambers as a platform technology for drug discovery and disease modeling
Mousavi, A., Stefanek, E., Jafari, A., Ajji, Z., Naghieh, S., Akbari, M., & Savoji, H. (2022) · Biomaterials Advances · doi:10.1016/j.bioadv.2022.212916 · Cited by 27
Advances in tumor microenvironment: Applications and challenges of 3D bioprinting
Dong, Y., Zhou, X., Ding, Y., Luo, Y., & Zhao, H. (2024) · Biochemical and Biophysical Research Communications · doi:10.1016/j.bbrc.2024.150339 · Cited by 27
Peregrino, V. M. A., Tenorio-Barajas, A. Y., Mendoza‐Barrera, C., Román-Doval, J., Lavariega-Sumano, E. F., Torres-Arellanes, S. P., & Román‐Doval, R. (2025) · Bioengineering · doi:10.3390/bioengineering12090936 · Cited by 29
Extrusion-Based Bioprinting: Current Standards and Relevancy for Human-Sized Tissue Fabrication
Willson, K., Ke, D., Kengla, C., Atala, A., & Murphy, S. V. (2020) · Methods in molecular biology · doi:10.1007/978-1-0716-0520-2_5 · Cited by 29
Coaxial bioprinting vascular constructs: A review
Xu, H., Su, Y., Liao, Z., Liu, Z., Huang, X., Zhao, L., Duan, R., Hu, Y., Wei, Y., Lian, X., et al. (2022) · European Polymer Journal · doi:10.1016/j.eurpolymj.2022.111549 · Cited by 26
Characterizing gelatin hydrogel viscoelasticity with diffusing colloidal probe microscopy
Shabaniverki, S., & Juárez, J. J. (2017) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2017.02.057 · Cited by 26
Light-based 3D bioprinting techniques for illuminating the advances of vascular tissue engineering
Li, W., Li, J., Pan, C., Lee, J., Kim, B. S., & Gao, G. (2024) · Materials Today Bio · doi:10.1016/j.mtbio.2024.101286 · Cited by 32
Vizirianakis, I. S., Miliotou, Α. N., Mystridis, G. A., Andriotis, E. G., Andreadis, I. I., Papadopoulou, L. C., & Fatouros, D. G. (2019) · Expert Review of Precision Medicine and Drug Development · doi:10.1080/23808993.2019.1605828 · Cited by 25
Alginate Hydrogels: A Tool for 3D Cell Encapsulation, Tissue Engineering, and Biofabrication
Bonani, W., Cagol, N., & Maniglio, D. (2020) · Advances in experimental medicine and biology · doi:10.1007/978-981-15-3262-7_4 · Cited by 25
Aggregation-Induced Emission Fluorescent Gels: Current Trends and Future Perspectives
Tavakoli, J., Ghahfarokhi, A. J., & Tang, Y. (2021) · Topics in Current Chemistry · doi:10.1007/s41061-020-00322-6 · Cited by 25
3-Dimensional Bioprinting of Cardiovascular Tissues
Sung, K., Patel, N. R., Ashammakhi, N. A., & Nguyen, K. (2021) · JACC Basic to Translational Science · doi:10.1016/j.jacbts.2020.12.006 · Cited by 25
Preparation, Mechanical and Biological Properties of Inkjet Printed Alginate/Gelatin Hydrogel
Jiao, T., Lian, Q., Zhao, T., Wang, H., & Li, D. (2021) · Journal of Bionic Engineering · doi:10.1007/s42235-021-0036-9 · Cited by 25
Tackling Current Biomedical Challenges With Frontier Biofabrication and Organ-On-A-Chip Technologies
Celikkin, N., Presutti, D., Maiullari, F., Fornetti, E., Agarwal, T., Paradiso, A., Volpi, M., Święszkowski, W., Bearzi, C., Barbetta, A., et al. (2021) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2021.732130 · Cited by 26
Self-citationClinical Application for Tissue Engineering Focused on Materials
Kitsuka, T., Hama, R., Ulziibayar, A., Matsuzaki, Y., Kelly, J. M., & Shinoka, T. (2022) · Biomedicines · doi:10.3390/biomedicines10061439 · Cited by 26
Zhang, B., Gao, L., Gu, L., Yang, H., Luo, Y., & Ma, L. (2017) · Procedia CIRP · doi:10.1016/j.procir.2017.04.017 · Cited by 25
Nejadebrahim, A., Ebrahimi, M., Allonas, X., Croutxé‐Barghorn, C., Ley, C., & Métral, B. (2019) · RSC Advances · doi:10.1039/c9ra09170j · Cited by 25
Photocrosslinkable silk-based biomaterials for regenerative medicine and healthcare applications
Dey, S., Jaiswal, C., Shome, S., Bhar, B., Bandyopadhyay, A., Manikumar, K., Dadheech, R., & Mandal, B. B. (2023) · Regenerative Engineering and Translational Medicine · doi:10.1007/s40883-022-00277-8 · Cited by 24
Revolutionizing Patient Care: 3D Printing for Customized Medical Devices and Therapeutics
Borthakur, P. P., Das, A., Sahariah, J. J., Pramanik, P., Baruah, E., & Pathak, K. (2025) · Biomedical Materials & Devices · doi:10.1007/s44174-025-00324-2 · Cited by 24
Dynamic bioinks for tissue/organ bioprinting: Principle, challenge, and perspective
Ma, D., Lu, W. W., Liu, W., Liu, W., & Ruan, C. (2025) · Progress in Materials Science · doi:10.1016/j.pmatsci.2025.101527 · Cited by 30
Self-citationStem Cells and Their Cardiac Derivatives for Cardiac Tissue Engineering and Regenerative Medicine
Roshanbinfar, K., Esser, T. U., & Engel, F. B. (2020) · Antioxidants and Redox Signaling · doi:10.1089/ars.2020.8193 · Cited by 25
Hayat, U., Raza, A., Bilal, M., Iqbal, H. M. N., & Wang, J. (2021) · Journal of Drug Delivery Science and Technology · doi:10.1016/j.jddst.2021.103014 · Cited by 24
Cardiovascular Tissue Engineering and Regeneration: A Plead for Further Knowledge Convergence
Bouten, C. V. C., Cheng, C., Vermue, I. M., Gawlitta, D., & Passier, R. C. (2022) · Tissue Engineering Part A · doi:10.1089/ten.tea.2021.0231 · Cited by 27
Biofabrication: From Additive Manufacturing to Bioprinting
van Kampen, K. A., Scheuring, R. G., Terpstra, M. L., Levato, R., Gröll, J., Malda, J., Mota, C., & Moroni, L. (2019) · Elsevier eBooks · doi:10.1016/b978-0-12-801238-3.11118-3 · Cited by 23
Direct-write and sacrifice-based techniques for vasculatures
Li, S., Wang, K., Hu, Q., Zhang, C., & Wang, B. (2019) · Materials Science and Engineering C · doi:10.1016/j.msec.2019.109936 · Cited by 23
3D Bioprinting of Reinforced Vessels by Dual-Cross-linked Biocompatible Hydrogels
Peng, K., Liu, X., Zhao, H., Lü, H., Lv, F., Liu, L., Huang, Y., Wang, S., & Gu, Q. (2021) · ACS Applied Bio Materials · doi:10.1021/acsabm.1c00283 · Cited by 23
Applications of 3D Bio-Printing in Tissue Engineering and Biomedicine
Jiang, W., Mei, H., & Zhao, S. (2021) · Journal of Biomedical Nanotechnology · doi:10.1166/jbn.2021.3078 · Cited by 25
Materials for Dentoalveolar Bioprinting: Current State of the Art
Amoli, M. S., EzEldeen, M., Jacobs, R., & Bloemen, V. (2021) · Biomedicines · doi:10.3390/biomedicines10010071 · Cited by 23
Biodegradable Inks in Indirect Three-Dimensional Bioprinting for Tissue Vascularization
Ze, Y., Li, Y., Huang, L., Shi, Y., Li, P., Gong, P., Lin, J., & Yao, Y. (2022) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2022.856398 · Cited by 28
Wu, C. A., Zhu, Y., Venkatesh, A., Stark, C. J., Lee, S. H., & Woo, Y.-P. J. (2023) · Tissue Engineering Part C Methods · doi:10.1089/ten.tec.2022.0214 · Cited by 23
Dutta, S. D., Patil, T. V., Ganguly, K., Randhawa, A., Acharya, R., Moniruzzaman, M., & Lim, K. (2023) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2023.121232 · Cited by 24
Wei, S., Chen, P., Hsieh, C., Chen, Y.-S., Chen, T.-H., Yu, Y.-S., Tsai, M.-C., Xie, R., Chen, G., Yin, G.-C., et al. (2023) · Biomaterials · doi:10.1016/j.biomaterials.2023.122402 · Cited by 23
Nain, A., Joshi, A., Debnath, S., Choudhury, S., Thomas, J., Satija, J., Huang, C., & Chatterjee, K. (2024) · Journal of Materials Chemistry B · doi:10.1039/d4tb00498a · Cited by 22
3D Bioprinting and Translation of Beta Cell Replacement Therapies for Type 1 Diabetes
Gurlin, R. E., Giraldo, J. A., & Latres, E. (2020) · Tissue Engineering Part B Reviews · doi:10.1089/ten.teb.2020.0192 · Cited by 23
Martier, A. T., Chen, Z., Schaps, H., Mondrinos, M. J., & Fang, J. (2024) · Frontiers in Physiology · doi:10.3389/fphys.2024.1425618 · Cited by 22
All‐Aqueous Embedded 3D Printing for Freeform Fabrication of Biomimetic 3D Constructs
Deng, X., Cheng, Q., Meng, S., Dong, H., Wang, T., Liu, Z., & Kong, T. (2024) · Advanced Materials · doi:10.1002/adma.202406825 · Cited by 25
Banigo, A. T., Nauta, L., Zoetebier, B., & Karperien, M. (2025) · Polymers · doi:10.3390/polym17070917 · Cited by 24
Kurniawan, N. A. (2019) · Current Opinion in Organ Transplantation · doi:10.1097/mot.0000000000000690 · Cited by 23
Figueiredo, L., Visage, C. L., Weiss, P., & Yang, J. (2020) · Polymers · doi:10.3390/polym12061260 · Cited by 22
Xiao, W., Zhang, P., Wei, H., & Yu, Y. (2020) · ACS Macro Letters · doi:10.1021/acsmacrolett.0c00621 · Cited by 22
Bioinks—materials used in printing cells in designed 3D forms
Tamay, D. G., & Hasırcı, N. (2021) · Journal of Biomaterials Science Polymer Edition · doi:10.1080/09205063.2021.1892470 · Cited by 22
Motealleh, A., Schäfer, A. H., Fromm, O., & Kehr, N. S. (2021) · Biomacromolecules · doi:10.1021/acs.biomac.1c01067 · Cited by 22
Advances in Filament Structure of 3D Bioprinted Biodegradable Bone Repair Scaffolds
Lin, C., Wang, Y., Huang, Z., Wu, T., Xu, W., Wu, W., & Xu, Z. (2021) · International Journal of Bioprinting · doi:10.18063/ijb.v7i4.426 · Cited by 23
Aliabouzar, M., Ley, A. W. Y., Meurs, S., Putnam, A. J., Baker, B. M., Kripfgans, O. D., Fowlkes, J. B., & Fabiilli, M. L. (2021) · Bioprinting · doi:10.1016/j.bprint.2021.e00188 · Cited by 22
Hochman‐Mendez, C., Mesquita, F., Morrissey, J., da Costa, E. C., Hülsmann, J., Tang-Quan, K. R., Xi, Y. T., Lee, P.-F., Sampaio, L. C., & Taylor, D. A. (2021) · Acta Biomaterialia · doi:10.1016/j.actbio.2021.12.016 · Cited by 22
Khoshnood, N., & Zamanian, A. (2022) · Journal of Applied Polymer Science · doi:10.1002/app.52227 · Cited by 22
Immohr, M. B., Adrego, F. D. S., Teichert, H. L., Schmidt, V., Sugimura, Y., Bauer, S. J., Barth, M., Lichtenberg, A., & Akhyari, P. (2022) · Biomedical Materials · doi:10.1088/1748-605x/ac9f91 · Cited by 22
Application of 4D printing and bioprinting in cardiovascular tissue engineering
Zhou, Z., Tang, W., Yang, J., & Fan, C. (2023) · Biomaterials Science · doi:10.1039/d3bm00312d · Cited by 22
Kiratitanaporn, W., Guan, J., Berry, D. B., Lao, A., & Chen, S. (2023) · Tissue Engineering Part A · doi:10.1089/ten.tea.2023.0193 · Cited by 22
Thangadurai, M., Srinivasan, S. S., Sekar, M. P., Sethuraman, S., & Sundaramurthi, D. (2023) · Journal of Materials Chemistry B · doi:10.1039/d3tb01847d · Cited by 22
A Small‐Molecule Polycationic Crosslinker Boosts Alginate‐Based Bioinks for Extrusion Bioprinting
Gao, C., Tang, L., Qu, H., Wu, M., Zhou, T., Wen, C., Wang, P., Xu, N., & Ruan, C. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202310369 · Cited by 22
Millet, M., Messaoud, R. B., Luthold, C., & Bordeleau, F. (2019) · Micromachines · doi:10.3390/mi10060418 · Cited by 24
Fabrication of vascularized tissue‐engineered bone models using triaxial bioprinting
Zhang, J., Suttapreyasri, S., Leethanakul, C., & Samruajbenjakun, B. (2024) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.37694 · Cited by 21
Scalable tissue biofabrication via perfusable hollow fiber arrays for cultured meat applications
Nie, M., Shima, A., Yamamoto, M., & Takeuchi, S. (2025) · Trends in biotechnology · doi:10.1016/j.tibtech.2025.02.022 · Cited by 26
Dunham, S. N., Mosadegh, B., Romito, E. A., & Zgaren, M. (2018) · Elsevier eBooks · doi:10.1016/b978-0-12-803917-5.00004-3 · Cited by 22
Silva, C., Cortés-Rodríguez, C. J., Hazur, J., Reakasame, S., & Boccaccini, A. R. (2020) · International Journal of Bioprinting · doi:10.18063/ijb.v6i4.282 · Cited by 21
Multilayered and heterogeneous hydrogel construct printing system with crosslinking aerosol
Lee, G., Kim, S. J., Chun, H., & Park, J. (2021) · Biofabrication · doi:10.1088/1758-5090/ac25ca · Cited by 21
Emerging tissue engineering strategies for the corneal regeneration
Tafti, M. F., Aghamollaei, H., Moghaddam, M. M., Jadidi, K., ALIO, J. L., & Faghihi, S. (2022) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.3309 · Cited by 22
Heart Energy Harvesting and Cardiac Bioelectronics: Technologies and Perspectives
Mariello, M. (2022) · Nanoenergy Advances · doi:10.3390/nanoenergyadv2040018 · Cited by 21
Pérez-Cortez, J. E., Sánchez-Rodríguez, V. H., Gallegos-Martínez, S., Chuck‐Hernández, C., Rodriguez, C. A., Álvarez, M. M., Santiago, G. T., Vázquez, E., & Martínez-López, J. I. (2022) · Micromachines · doi:10.3390/mi14010055 · Cited by 23
Electrospinning and Cell Fibers in Biomedical Applications
Zhao, Q., Du, X., & Wang, M. (2023) · Advanced Biology · doi:10.1002/adbi.202300092 · Cited by 21
Mending a broken heart by biomimetic 3D printed natural biomaterial-based cardiac patches: a review
Rosellini, E., Cascone, M. G., Guidi, L., Schubert, D. W., Roether, J. A., & Boccaccini, A. R. (2023) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2023.1254739 · Cited by 24
An instructional design strategy for optimization of GelMA hydrogels material properties
Ding, S., He, S., Shen, L., Yang, Q., & Yang, G. (2024) · European Polymer Journal · doi:10.1016/j.eurpolymj.2024.113336 · Cited by 23
Advanced tumor organoid bioprinting strategy for oncology research
Cui, X., Jiao, J., Yang, L., Wang, Y., Jiang, W., Yu, T., Li, M., Zhang, H., Chao, B., Wang, Z., et al. (2024) · Materials Today Bio · doi:10.1016/j.mtbio.2024.101198 · Cited by 25
Coaxial 3D bioprinting of organ prototyps from nutrients delivery to vascularization
Ramezani, H., Zhou, L., Shao, L., & He, Y. (2020) · Journal of Zhejiang University. Science A · doi:10.1631/jzus.a2000261 · Cited by 20
Embedded multimaterial bioprinting platform for biofabrication of biomimetic vascular structures
Dikyol, C., Altunbek, M., & Koç, B. (2021) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/s43578-021-00254-x · Cited by 20
Alendronate-functionalized double network hydrogel scaffolds for effective osteogenesis
Tang, G., Zhu, L. J., Wang, W., Zuo, D., Shi, C., Yu, X., & Chen, R. (2022) · Frontiers in Chemistry · doi:10.3389/fchem.2022.977419 · Cited by 21
Drug loaded implantable devices to treat cardiovascular disease
Adhami, M., Martin, N. K., Maguire, C., Courtenay, A. J., Donnelly, R. F., Domínguez‐Robles, J., & Larrañeta, E. (2023) · Expert Opinion on Drug Delivery · doi:10.1080/17425247.2023.2190580 · Cited by 20
Engineering Heterogeneous Tumor Models for Biomedical Applications
Wu, Z., Huang, D., Wang, J., Zhao, Y., Sun, W., & Shen, X. (2023) · Advanced Science · doi:10.1002/advs.202304160 · Cited by 19
Fu, Z., Hai, N., Zhong, Y., & Sun, W. (2024) · Biofabrication · doi:10.1088/1758-5090/ad30c3 · Cited by 20
Bioprinting and Biofabrication with Peptide and Protein Biomaterials
Boyd‐Moss, M., Fox, K. E., Brandt, M., Nisbet, D. R., & Williams, R. J. (2017) · Advances in experimental medicine and biology · doi:10.1007/978-3-319-66095-0_5 · Cited by 20
Microparticles for Suspension Culture of Mammalian Cells
Smith, D. L., Herman, C. E., Razdan, S., Abedin, M. R., Stoecker, W. V., & Barua, S. (2019) · ACS Applied Bio Materials · doi:10.1021/acsabm.9b00215 · Cited by 20
Designing Biomaterial Platforms for Cardiac Tissue and Disease Modeling
House, A. A., Atalla, I., Lee, E. J., & Güvendiren, M. (2020) · Advanced NanoBiomed Research · doi:10.1002/anbr.202000022 · Cited by 20
Iudin, D., van Steenbergen, M. J., Masereeuw, R., van Ravensteijn, B. G. P., & Vermonden, T. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202416522 · Cited by 19
Murphy, R. D., Kordbacheh, S., Skoulas, D., Ng, S., Suthiwanich, K., Kasko, A. M., Cryan, S., Fitzgerald‐Hughes, D., Khademhosseini, A., Sheikhi, A., et al. (2021) · Biomaterials Science · doi:10.1039/d1bm00275a · Cited by 19
Self-citationReplace and repair: Biomimetic bioprinting for effective muscle engineering
Blake, C., Massey, O., Boyd‐Moss, M., Firipis, K., Rifai, A., Franks, S. J., Quigley, A. F., Kapsa, R. M. I., Nisbet, D. R., & Williams, R. J. (2021) · APL Bioengineering · doi:10.1063/5.0040764 · Cited by 19
Parisi, C., Qin, K., & Fernandes, F. M. (2021) · Philosophical Transactions of the Royal Society A Mathematical Physical and Engineering Sciences · doi:10.1098/rsta.2020.0344 · Cited by 20
Costa, A. L. R., Willerth, S. M., de la Torre, L. G., & Han, S. W. (2022) · Materials Today Bio · doi:10.1016/j.mtbio.2022.100221 · Cited by 19
Lymphatic Tissue Bioengineering for the Treatment of Postsurgical Lymphedema
Sung, C., Gupta, K., Wang, J., & Wong, A. K. (2022) · Bioengineering · doi:10.3390/bioengineering9040162 · Cited by 20
Zhuang, X., Deng, G., Wu, X., Xie, J., Li, D., Peng, S., Tang, D., & Zhou, G. (2023) · Frontiers in Oncology · doi:10.3389/fonc.2023.1143600 · Cited by 19
Engineered Vasculature for Cancer Research and Regenerative Medicine
Nguyen, H. T., Peirsman, A., Tirpáková, Z., Mandal, K., Vanlauwe, F., Maity, S., Kawakita, S., Khorsandi, D., Herculano, R. D., Umemura, C., et al. (2023) · Micromachines · doi:10.3390/mi14050978 · Cited by 19
Self-citationCui, H., Yu, Z., Huang, Y., Hann, S.-Y., Esworthy, T. J., Shen, Y.-L., & Zhang, L. G. (2023) · Biomaterials Advances · doi:10.1016/j.bioadv.2023.213579 · Cited by 21
Pan, C., Xu, J., Gao, Q., Li, W., Sun, T., Lu, J., Shi, Q., Han, Y., Gao, G., & Li, J. (2023) · Biofabrication · doi:10.1088/1758-5090/aceffa · Cited by 19
Dobrișan, M.-R., Lungu, A., & Ioniţă, M. (2024) · Virtual and Physical Prototyping · doi:10.1080/17452759.2024.2378003 · Cited by 21
3D bioprinted GelMA scaffolds for clinical applications: Promise and challenges
Das, S., Valoor, R., Jegadeesan, J. T., & Basu, B. (2024) · Bioprinting · doi:10.1016/j.bprint.2024.e00365 · Cited by 21
Bioprinting: Uncovering the Utility Layer-By-Layer
Burke, M., Carter, B. M., & Perriman, A. W. (2017) · Journal of 3D Printing in Medicine · doi:10.2217/3dp-2017-0006 · Cited by 19
Perfused Organ Cell‐Dense Macrotissues Assembled from Prefabricated Living Microtissues
Ip, B. C., Cui, F. R., Wilks, B. T., Murphy, J., Tripathi, A., & Morgan, J. R. (2018) · Advanced Biosystems · doi:10.1002/adbi.201800076 · Cited by 19
Transcribing In Vivo Blood Vessel Networks into In Vitro Perfusable Microfluidic Devices
Chen, Y. Y., Kingston, B. R., & Chan, W. C. W. (2020) · Advanced Materials Technologies · doi:10.1002/admt.202000103 · Cited by 24
Stimuli-responsive hybrid materials for 4D in vitro tissue models
Aizarna‐Lopetegui, U., Bittinger, S. C., Álvarez, N., Henriksen‐Lacey, M., & de Aberasturi, D. J. (2025) · Materials Today Bio · doi:10.1016/j.mtbio.2025.102035 · Cited by 19
Matavosian, A. A., & Bonassar, L. J. (2025) · Biofabrication · doi:10.1088/1758-5090/ae11d4 · Cited by 21
Frejo, L., Goldstein, T. A., Swami, P. N., Patel, N. A., Grande, D. A., Zeltsman, D., & Smith, L. P. (2022) · International Journal of Pediatric Otorhinolaryngology · doi:10.1016/j.ijporl.2022.111066 · Cited by 18
Guiding cell migration in 3D with high-resolution photografting
Sayer, S., Zandrini, T., Marković, M., Hoorick, J. V., Vlierberghe, S. V., Baudis, S., Holnthoner, W., & Ovsianikov, A. (2022) · Scientific Reports · doi:10.1038/s41598-022-11612-y · Cited by 19
4D printing of Metal-Reinforced double network granular hydrogels
Hirsch, M., D’Onofrio, L., Guan, Q., Hughes, J., & Amstad, E. (2023) · Chemical Engineering Journal · doi:10.1016/j.cej.2023.145433 · Cited by 18
Mesenchymal stem cells as future treatment for cardiovascular regeneration and its challenges
Seow, K. S., & Ling, A. P. K. (2024) · Annals of Translational Medicine · doi:10.21037/atm-23-1936 · Cited by 21
In situ and non-cytotoxic cross-linking strategy for 3D printable biomaterials
Sümbelli, Y., Di̇ltemi̇z, S. E., Say, M. G., Ünlüer, Ö. B., Ersöz, A., & Say, R. (2020) · Soft Matter · doi:10.1039/d0sm01734e · Cited by 18
Metadata
- Authors
- Jia, W., Gungor-Ozkerim, P. S., Zhang, Y. S., Yue, K., Zhu, K., Liu, W., Pi, Q., Byambaa, B., Dokmeci, M. R., Shin, S. R., & Khademhosseini, A.
- Affiliations
- Brigham and Women's Hospital (US)
- Corresponding author
- Zhang, Yu Shrike
- Shin, Su Ryon
- Khademhosseini, Ali
- ORCID
- Venue
- Biomaterials
- Publisher
- Elsevier BV
- Published
- 2016-11
- Volume
- 106
- Pages
- 58-68
- ISSN
- 0142-9612 (ISSN-L)
- PMC
- PMC5300870
- OpenAlex
- W2502401296
- Cited by
- 922
- References
- 67
- Citations by year
- 2026: 37 · 2025: 59 · 2024: 86 · 2023: 97 · 2022: 113 · 2021: 132 · 2020: 121 · 2019: 110 · 2018: 94 · 2017: 68 · 2016: 4
- FWCI
- 44.28
- Type
- journal article
- Language
- en
- Update notices
- erratum (2025-11-01)
- Open access
- bronze
- doi.org
- Licence
- Locations
- Biomaterials (acceptedVersion)
- PubMed (publishedVersion)
- PubMed Central (acceptedVersion)
- Funders
- National Cancer Institute (1K99CA201603-01A1)
- National Institutes of Health (HL099073, EB02597, AR057837, HL092836)
- Natural Sciences and Engineering Research Council of Canada
- National Science Foundation (DMR0847287)
- Türkiye Bilimsel ve Teknolojik Araştırma Kurumu (B.14.2.TBT.0.06.01-219-115543)
- Office of Naval Research
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Health Sciences › Medicine › Surgery › Tissue Engineering and Regenerative Medicine
- Keywords
- 3D bioprinting, perfusable vascular networks, gelatin methacryloyl, sodium alginate, coaxial extrusion, calcium crosslinking, photocrosslinking, endothelial cells, stem cells, vascularized tissue engineering, mechanical strength
- MeSH terms
- Blood Vessels, Cells, Cultured, Equipment Design, Humans, Ink, Organ Culture Techniques, Perfusion, Neovascularization, Physiologic, Bioreactors, Bioartificial Organs, Tissue Engineering, Endothelial Cells, Tissue Scaffolds, Batch Cell Culture Techniques, Printing, Three-Dimensional
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
