The DOI matches its Crossref record; 67 of the 67 references it cites were found in a registry or an index.
Direct 3D bioprinting of perfusable vascular constructs using a blend bioink
Open accessAbstract
Despite the significant technological advancement in tissue engineering, challenges still exist towards the development of complex and fully functional tissue constructs that mimic their natural counterparts. To address these challenges, bioprinting has emerged as an enabling technology to create highly organized three-dimensional (3D) vascular networks within engineered tissue constructs to promote the transport of oxygen, nutrients, and waste products, which can hardly be realized using conventional microfabrication techniques. Here, we report the development of a versatile 3D bioprinting strategy that employs biomimetic biomaterials and an advanced extrusion system to deposit perfusable vascular structures with highly ordered arrangements in a single-step process. In particular, a specially designed cell-responsive bioink consisting of gelatin methacryloyl (GelMA), sodium alginate, and 4-arm poly(ethylene glycol)-tetra-acrylate (PEGTA) was used in combination with a multilayered coaxial extrusion system to achieve direct 3D bioprinting. This blend bioink could be first ionically crosslinked by calcium ions followed by covalent photocrosslinking of GelMA and PEGTA to form stable constructs. The rheological properties of the bioink and the mechanical strengths of the resulting constructs were tuned by the introduction of PEGTA, which facilitated the precise deposition of complex multilayered 3D perfusable hollow tubes. This blend bioink also displayed favorable biological characteristics that supported the spreading and proliferation of encapsulated endothelial and stem cells in the bioprinted constructs, leading to the formation of biologically relevant, highly organized, perfusable vessels. These characteristics make this novel 3D bioprinting technique superior to conventional microfabrication or sacrificial templating approaches for fabrication of the perfusable vasculature. We envision that our advanced bioprinting technology and bioink formulation may also have significant potentials in engineering large-scale vascularized tissue constructs towards applications in organ transplantation and repair.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“In this context, the fast development of new fabrication techniques, such as 3D bioprinting, has led to a general decline in the cost and the specialized work involved in fabricating these chips [65 -67].”
From 3D In Vitro Model (R)evolution: Unveiling Tumor–Stroma Interactions (2021) · cites this paper as [65]
Experimental — accuracy not yet measuredThe cited source says what the claim attributes to it.
In the citing paper
“To this end, considerable efforts were made in developing hydrogel-based inks or printing techniques to enhance 3D stability and shape fidelity, such as printing multimaterial inks with combined nozzle system24, 25, photo-crosslinkable hydrogels17, 26, 27, adding viscosifiers28–30, or printing in sacrificial supporting materials31–33.”
From Fibre-infused gel scaffolds guide cardiomyocyte alignment in 3D-printed ventricles (2023) · cites this paper as [24]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
Hydrogels for biomedical applications
Hoffman, A. S. (2002) · Advanced Drug Delivery Reviews · doi:10.1016/s0169-409x(01)00239-3 · Cited by 4,864
Hydrogels for biomedical applications
Hoffman, A. S. (2012) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2012.09.010 · Cited by 3,396
Synthesis, properties, and biomedical applications of gelatin methacryloyl (GelMA) hydrogels
Yue, K., Trujillo-de Santiago, G., Alvarez, M. M., Tamayol, A., Annabi, N., & Khademhosseini, A. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.08.045 · Cited by 3,146
Self-citationHydrogels in regenerative medicine
Slaughter, B. V., Khurshid, S. S., Fisher, O. Z., Khademhosseini, A., & Peppas, N. A. (2009) · Advanced Materials · doi:10.1002/adma.200802106 · Cited by 2,703
Self-citationA 3D bioprinting system to produce human-scale tissue constructs with structural integrity
Kang, H.-W., Lee, S. J., Ko, I. K., Kengla, C., Yoo, J. J., & Atala, A. (2016) · Nature Biotechnology · doi:10.1038/nbt.3413 · Cited by 2,622
Cell-laden microengineered gelatin methacrylate hydrogels
Nichol, J. W., Koshy, S. T., Bae, H., Hwang, C. M., Yamanlar, S., & Khademhosseini, A. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.03.064 · Cited by 2,377
Self-citationHyaluronic Acid Hydrogels for Biomedical Applications
Burdick, J. A., & Prestwich, G. D. (2011) · Advanced Materials · doi:10.1002/adma.201003963 · Cited by 2,150
3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs
Kolesky, D. B., Truby, R. L., Gladman, A. S., Busbee, T. A., Homan, K. A., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201305506 · Cited by 2,102
Rapid casting of patterned vascular networks for perfusable engineered three-dimensional tissues
Miller, J. S., Stevens, K. R., Yang, M. T., Baker, B. M., Nguyen, D.-H. T., Cohen, D. M., Toro, E., Chen, A. A., Galie, P. A., Yu, X., et al. (2012) · Nature Materials · doi:10.1038/nmat3357 · Cited by 1,917
Flagged first, then by citations
Research works printed but not linked: 1
- Kolesky, 2014, 3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs, Adv. Mater., 26, 3124, 10.1002/adma.201305506 · DOI · Paper page
Cited by
Sorted by citations
Items 201–300 of 919
3D printed coaxial nozzles for the extrusion of hydrogel tubes toward modeling vascular endothelium
Millik, S. C., Dostie, A. M., Karis, D., Smith, P. T., McKenna, M., Chan, N. R., Curtis, C., Nance, E. A., Theberge, A. B., & Nelson, A. (2019) · Biofabrication · doi:10.1088/1758-5090/ab2b4d · Cited by 101
Embedding Biomimetic Vascular Networks via Coaxial Sacrificial Writing into Functional Tissue
Stankey, P. P., Kroll, K. T., Ainscough, A. J., Reynolds, D. S., Elamine, A., Fichtenkort, B. T., Uzel, S. G. M., & Lewis, J. A. (2024) · Advanced Materials · doi:10.1002/adma.202401528 · Cited by 106
Xu, Y., Hu, Y., Liu, C., Yao, H., Liu, B., & Mi, S. (2018) · Materials · doi:10.3390/ma11091581 · Cited by 100
Advanced 3D imaging and organoid bioprinting for biomedical research and therapeutic applications
Maharjan, S., Ma, C., Singh, B., Kang, H., Orive, G., Yao, J., & Zhang, Y. S. (2024) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2024.115237 · Cited by 107
Self-citationGhanian, M. H., Mirzadeh, H., & Baharvand, H. (2018) · Biomacromolecules · doi:10.1021/acs.biomac.8b00140 · Cited by 101
A mini-review of embedded 3D printing: supporting media and strategies
Zhao, J., & He, N. (2020) · Journal of Materials Chemistry B · doi:10.1039/d0tb01819h · Cited by 99
The emergence of 3D bioprinting in organ-on-chip systems
Fetah, K., Tebon, P. J., Goudie, M. J., Eichenbaum, J., Ren, L. M., de Barros, N. R., Nasiri, R., Ahadian, S., Ashammakhi, N. A., Dokmeci, M. R., et al. (2019) · Progress in Biomedical Engineering · doi:10.1088/2516-1091/ab23df · Cited by 106
Self-citationCarletto, R. P., Ko, S. K., Caviglia, C., Wolff, A., Emnéus, J., Keller, S. S., & Dufva, M. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.10.047 · Cited by 98
Liu, X., Carter, S.-S. D., Renes, M. J., Kim, J., Rojas-Canales, D., Penko, D., Angus, C., Beirne, S., Drogemuller, C., Yue, Z.-L., et al. (2019) · Advanced Healthcare Materials · doi:10.1002/adhm.201801181 · Cited by 86
Lin, Z., Wu, M., He, H., Liang, Q., Hu, C., Zeng, Z., Cheng, D., Wang, G., Chen, D., Pan, H., et al. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201808439 · Cited by 97
3D Bioprinting for Vascularized Tissue-Engineered Bone Fabrication
Xing, F., Xiang, Z., Rommens, P. M., & Ritz, U. (2020) · Materials · doi:10.3390/ma13102278 · Cited by 99
3D Liver Tissue Model with Branched Vascular Networks by Multimaterial Bioprinting
Liu, X., Wang, X., Zhang, L., Sun, L., Wang, H., Zhao, H., Zhang, Z., Li, W., Huang, Y., Ji, S., et al. (2021) · Advanced Healthcare Materials · doi:10.1002/adhm.202101405 · Cited by 103
van Dijk, C. G. M., Brandt, M. M., Poulis, N., Anten, J., van der Moolen, M., Kramer, L., Homburg, E. F. G. A., Louzao-Martinez, L., Pei, J., Krebber, M. M., et al. (2020) · Lab on a Chip · doi:10.1039/d0lc00059k · Cited by 99
Polysaccharide hydrogel based 3D printed tumor models for chemotherapeutic drug screening
Gebeyehu, A., Surapaneni, S. K., Huang, J. J., Mondal, A., Wang, V. Z., Haruna, N.-F., Bagde, A., Arthur, P., Kutlehria, S., Patel, N. K., et al. (2021) · Scientific Reports · doi:10.1038/s41598-020-79325-8 · Cited by 102
Shedding light on 3D printing: Printing photo-crosslinkable constructs for tissue engineering
Zhang, Q., Bei, H., Zhao, M., Dong, Z., & Zhao, X. (2022) · Biomaterials · doi:10.1016/j.biomaterials.2022.121566 · Cited by 95
3D Bioprinted Vascularized Tumour for Drug Testing
Han, S., Kim, S., Chen, Z., Shin, H. K., Lee, S.-Y., Moon, H. E., Paek, S. H., & Park, S. (2020) · International Journal of Molecular Sciences · doi:10.3390/ijms21082993 · Cited by 94
Gu, J., Zhang, Q., Geng, M., Wang, W., Jin, Y., Khan, A. U. R., Du, H., Sha, Z., Zhou, X., & He, C. (2021) · Bioactive Materials · doi:10.1016/j.bioactmat.2021.02.033 · Cited by 94
Printability during projection-based 3D bioprinting
Yu, K., Zhang, X., Sun, Y., Gao, Q., Fu, J., Cai, X., & He, Y. (2021) · Bioactive Materials · doi:10.1016/j.bioactmat.2021.09.021 · Cited by 94
Das, S., Jegadeesan, J. T., & Basu, B. (2024) · Biomacromolecules · doi:10.1021/acs.biomac.3c01271 · Cited by 104
Complex 3D bioprinting methods
Ji, S., & Güvendiren, M. (2021) · APL Bioengineering · doi:10.1063/5.0034901 · Cited by 95
3D Bioprinted Scaffolds for Tissue Repair and Regeneration
Liu, N., Zhang, X., Guo, Q., Wu, T. S., & Wang, Y. (2022) · Frontiers in Materials · doi:10.3389/fmats.2022.925321 · Cited by 93
Harley, W. S., Li, C. C., Toombs, J. T., O’Connell, C. D., Taylor, H., Heath, D. E., & Collins, D. J. (2021) · Bioprinting · doi:10.1016/j.bprint.2021.e00147 · Cited by 103
Vascularization in tissue engineering: The architecture cues of pores in scaffolds
Xia, P., & Luo, Y. (2021) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.34979 · Cited by 93
3D bioprinting of soft materials-based regenerative vascular structures and tissues
Zhang, Z., Wang, B., Hui, D., Qiu, J., & Wang, S. (2017) · Composites Part B Engineering · doi:10.1016/j.compositesb.2017.05.011 · Cited by 93
O’Connell, C. D., Onofrillo, C., Duchi, S., Li, X., Zhang, Y., Tian, P., Lu, L., Trengove, A., Quigley, A. F., Gambhir, S., et al. (2019) · Biofabrication · doi:10.1088/1758-5090/ab0b7c · Cited by 97
Self-citationKaikai, X., Gong, Y., & Zhao, Q. (2023) · Archives of Civil and Mechanical Engineering · doi:10.1007/s43452-023-00699-3 · Cited by 91
3D Bioprinting Technologies for Tissue Engineering Applications
Gu, B. K., Choi, D. J., Park, S. J., Kim, Y., & Kim, C. (2018) · Advances in experimental medicine and biology · doi:10.1007/978-981-13-0950-2_2 · Cited by 95
From cells-on-a-chip to organs-on-a-chip: scaffolding materials for 3D cell culture in microfluidics
Terrell, J. A., Jones, C. G., Kabandana, G. K. M., & Chen, C. (2020) · Journal of Materials Chemistry B · doi:10.1039/d0tb00718h · Cited by 90
Inkjet–Spray Hybrid Printing for 3D Freeform Fabrication of Multilayered Hydrogel Structures
Yoon, S., Park, J. A., Lee, H., Yoon, W., Hwang, D. S., & Jung, S. (2018) · Advanced Healthcare Materials · doi:10.1002/adhm.201800050 · Cited by 90
Advances in three‐dimensional bioprinting of bone: Progress and challenges
Midha, S., Dalela, M., Sybil, D., Patra, P., & Mohanty, S. (2019) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.2847 · Cited by 91
Iranmanesh, P., Ehsani, A., Khademi, A., Asefnejad, A., Shahriari, S., Soleimani, M., Nejad, M. G., Saber‐Samandari, S., & Khandan, A. (2021) · Transport in Porous Media · doi:10.1007/s11242-021-01618-x · Cited by 87
Biomaterials Based on Marine Resources for 3D Bioprinting Applications
Zhang, Y., Zhou, D., Chen, J., Zhang, X., Li, X., Zhao, W., & Xu, T. (2019) · Marine Drugs · doi:10.3390/md17100555 · Cited by 91
Self-citationRecent advances in 3D bioprinting of musculoskeletal tissues
Potyondy, T., Uquillas, J. A., Tebon, P. J., Byambaa, B., Hasan, A., Tavafoghi, M., Mary, H., Aninwene, G. E., Pountos, I., Khademhosseini, A., et al. (2020) · Biofabrication · doi:10.1088/1758-5090/abc8de · Cited by 92
Self-citation4D printed shape-shifting biomaterials for tissue engineering and regenerative medicine applications
Kalogeropoulou, M., Díaz‐Payno, P. J., Mirzaali, M. J., van Osch, G. J. V. M., Fratila-Apachitei, L. E., & ZADPOOR, A. A. (2024) · Biofabrication · doi:10.1088/1758-5090/ad1e6f · Cited by 102
Visible light crosslinkable human hair keratin hydrogels
Yue, K., Liu, Y., Byambaa, B., Singh, V., Liu, W. H., Li, X., Sun, Y., Zhang, Y. S., Tamayol, A., Zhang, P., et al. (2017) · Bioengineering & Translational Medicine · doi:10.1002/btm2.10077 · Cited by 85
Self-citationBig bottlenecks in cardiovascular tissue engineering
Huang, N. F., Serpooshan, V., Morris, V. B., Sayed, N., Pardon, G., Abilez, O. J., Nakayama, K. H., Pruitt, B. L., Wu, S. M., Yoon, Y., et al. (2018) · Communications Biology · doi:10.1038/s42003-018-0202-8 · Cited by 82
Challenges and advances in materials and fabrication technologies of small-diameter vascular grafts
Li, M.-X., Wei, Q.-Q., Mo, H.-L., Ren, Y., Zhang, W., Lu, H.-J., & Joung, Y. K. (2023) · Biomaterials Research · doi:10.1186/s40824-023-00399-2 · Cited by 96
Synchronous 3D Bioprinting of Large‐Scale Cell‐Laden Constructs with Nutrient Networks
Shao, L., Gao, Q., Xie, C., Fu, J., Xiang, M., & He, Y. (2019) · Advanced Healthcare Materials · doi:10.1002/adhm.201901142 · Cited by 83
Recent Trends in Three-Dimensional Bioinks Based on Alginate for Biomedical Applications
Pahlevanzadeh, F., Mokhtari, H., Bakhsheshi‐Rad, H. R., Emadi, R., Kharaziha, M., Valiani, A., Poursamar, S. A., Ismail, A. F., Ramakrishna, S., & Berto, F. (2020) · Materials · doi:10.3390/ma13183980 · Cited by 87
Pirosa, A., Gottardi, R., Alexander, P. G., & Tuan, R. S. (2018) · Stem Cell Research & Therapy · doi:10.1186/s13287-018-0847-8 · Cited by 81
Recent advancements in the bioprinting of vascular grafts
Fazal, F., Raghav, S., Callanan, A., Koutsos, V., & Radacsi, N. (2021) · Biofabrication · doi:10.1088/1758-5090/ac0963 · Cited by 84
Construction of tumor organoids and their application to cancer research and therapy
Lv, J., Du, X., Wang, M., Su, J., Wei, Y., & Xu, C. (2024) · Theranostics · doi:10.7150/thno.91362 · Cited by 90
3D Bioprinting Stem Cell Derived Tissues
Tasnim, N., la Vega, L. D., Kumar, S. A., Abelseth, L., Alonzo, M., Amereh, M., Joddar, B., & Willerth, S. M. (2018) · Cellular and Molecular Bioengineering · doi:10.1007/s12195-018-0530-2 · Cited by 87
3D bioprinting for modelling vasculature
Sasmal, P. K., Datta, P., Wu, Y. B., & Ozbolat, I. T. (2018) · Microphysiological Systems · doi:10.21037/mps.2018.10.02 · Cited by 85
Additive Manufacturing of Vascular Grafts and Vascularized Tissue Constructs
Elomaa, L., & Yang, Y. (2016) · Tissue Engineering Part B Reviews · doi:10.1089/ten.teb.2016.0348 · Cited by 82
3D Printing in Development of Nanomedicines
Jain, K., Shukla, R., Yadav, A. K., Ujjwal, R. R., & Flora, S. J. S. (2021) · Nanomaterials · doi:10.3390/nano11020420 · Cited by 79
Bioprinting Methods for Fabricating In Vitro Tubular Blood Vessel Models
Kim, S. J., Kim, M.-G., Kim, J., Jeon, J. S., Park, J., & Yi, H. (2023) · Cyborg and Bionic Systems · doi:10.34133/cbsystems.0043 · Cited by 81
Bioprinting of Small-Diameter Blood Vessels
Cao, X., Maharjan, S., Ashfaq, R., Shin, J., & Zhang, Y. S. (2020) · Engineering · doi:10.1016/j.eng.2020.03.019 · Cited by 79
Self-citationFabrication of arbitrary 3D components in cardiac surgery: from macro-, micro- to nanoscale
Kankala, R. K., Zhu, K., Li, ., Wang, C., Wang, S., & Chen, A. (2017) · Biofabrication · doi:10.1088/1758-5090/aa8113 · Cited by 77
Self-citationMa, Y., Li, X., Yang, B., & Tian, W. (2018) · Biotechnology and Bioengineering · doi:10.1002/bit.26882 · Cited by 82
Bioink design for extrusion-based bioprinting
Zhang, T., Zhao, W., Xiahou, Z., Wang, X., Zhang, K., & Yin, J. (2021) · Applied Materials Today · doi:10.1016/j.apmt.2021.101227 · Cited by 80
Tissue engineering: current status and future perspectives
Chandra, P. K., Söker, S., & Atala, A. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-818422-6.00004-6 · Cited by 83
Advanced 4D-bioprinting technologies for brain tissue modeling and study
Esworthy, T. J., Miao, S., Lee, S., Zhou, X., Cui, H., Zuo, Y. Y., & Zhang, L. G. (2019) · International Journal of Smart and Nano Materials · doi:10.1080/19475411.2019.1631899 · Cited by 76
Continuous chaotic bioprinting of skeletal muscle-like constructs
Bolívar‐Monsalve, E. J., Ceballos‐González, C. F., Borrayo-Montaño, K. I., Quevedo‐Moreno, D. A., León, J. F. Y.-D., Khademhosseini, A., Weiss, P. S., Álvarez, M. M., & Santiago, G. T. (2021) · Bioprinting · doi:10.1016/j.bprint.2020.e00125 · Cited by 75
Self-citationAdvanced Polymers for Three-Dimensional (3D) Organ Bioprinting
Wang, X. (2019) · Micromachines · doi:10.3390/mi10120814 · Cited by 76
Tissue-specific engineering: 3D bioprinting in regenerative medicine
Wang, Z., Kapadia, W., Li, C., Lin, F. H., Pereira, R. F., Granja, P. L., Sarmento, B. F. C. C., & Cui, W. (2020) · Journal of Controlled Release · doi:10.1016/j.jconrel.2020.11.044 · Cited by 77
Hwang, D. G., Choi, Y., & Jang, J. (2021) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2021.685507 · Cited by 74
Song, S., Liu, X., Huang, J., & Zhang, Z. (2022) · Biomaterials Advances · doi:10.1016/j.msec.2021.112639 · Cited by 74
3D bioprinting of cell-laden hydrogels for advanced tissue engineering
Blaeser, A., Campos, D. F. D., & Fischer, H. (2017) · Current Opinion in Biomedical Engineering · doi:10.1016/j.cobme.2017.04.003 · Cited by 74
Bioprinting of Cell‐Laden Microfiber: Can It Become a Standard Product?
Shao, L., Gao, Q., Xie, C., Fu, J., Xiang, M., & He, Y. (2019) · Advanced Healthcare Materials · doi:10.1002/adhm.201900014 · Cited by 74
Microfluidics: A New Layer of Control for Extrusion-Based 3D Printing
Serex, L., Bertsch, A., & Renaud, P. (2018) · Micromachines · doi:10.3390/mi9020086 · Cited by 77
3D printing of methylcellulose-based hydrogels
Negrini, N. C., Bonetti, L., Contili, L., & Farè, S. (2018) · Bioprinting · doi:10.1016/j.bprint.2018.e00024 · Cited by 73
Overcoming kidney organoid challenges for regenerative medicine
Geuens, T., van Blitterswijk, C., & LaPointe, V. L. S. (2020) · npj Regenerative Medicine · doi:10.1038/s41536-020-0093-4 · Cited by 72
3D bioprinting strategy for engineering vascularized tissue models
Chae, S., Ha, D., & Lee, H. (2023) · International Journal of Bioprinting · doi:10.18063/ijb.748 · Cited by 82
Wu, J., Yun, Z., Song, W., Yu, T., Xue, W., Liu, Q., & Sun, X. (2024) · Theranostics · doi:10.7150/thno.89493 · Cited by 76
3D printing in cell culture systems and medical applications
Lerman, M. J., Lembong, J., Gillen, G. J., & Fisher, J. P. (2018) · Applied Physics Reviews · doi:10.1063/1.5046087 · Cited by 77
Recapitulating the vasculature using ORGAN-ON-CHIP technology
Pollet, A. M. A. O., & den Toonder, J. M. J. (2020) · Bioengineering · doi:10.3390/bioengineering7010017 · Cited by 73
Zhu, K., Chen, N., Liu, X., Mu, X., Zhang, W., Wang, C., & Zhang, Y. S. (2018) · Macromolecular Bioscience · doi:10.1002/mabi.201800127 · Cited by 75
Self-citationTissue Culture Models of AKI: From Tubule Cells to Human Kidney Organoids
Bejoy, J., Qian, E. S., & Woodard, L. E. (2022) · Journal of the American Society of Nephrology · doi:10.1681/asn.2021050693 · Cited by 72
Hu, X., Zhang, Z., Wu, H., Yang, S., Zhao, W., Che, L., Wang, Y., Cao, J., Li, K., & Qian, Z. (2023) · Biomaterials Advances · doi:10.1016/j.bioadv.2023.213501 · Cited by 76
Abdollahiyan, P., Oroojalian, F., Hejazi, M., de la Guárdia, M., & Mokhtarzadeh, A. (2021) · Journal of Controlled Release · doi:10.1016/j.jconrel.2021.04.003 · Cited by 72
Yao, B., Hu, T. H., Cui, X., Song, W., Fu, X., & Huang, S. (2019) · Biofabrication · doi:10.1088/1758-5090/ab38ef · Cited by 71
Angiogenic biomaterials to promote therapeutic regeneration and investigate disease progression
Ngo, M. T., & Harley, B. A. C. (2020) · Biomaterials · doi:10.1016/j.biomaterials.2020.120207 · Cited by 72
Key parameters and applications of extrusion-based bioprinting
Tian, S., Zhao, H., & Lewinski, N. A. (2021) · Bioprinting · doi:10.1016/j.bprint.2021.e00156 · Cited by 75
Three-dimensional bioprinting for bone tissue regeneration
Adepu, S., Dhiman, N., Laha, A., Sharma, C. S., Ramakrishna, S., & Khandelwal, M. (2017) · Current Opinion in Biomedical Engineering · doi:10.1016/j.cobme.2017.03.005 · Cited by 70
Synergistic coupling between 3D bioprinting and vascularization strategies
Yeo, M., Sarkar, A., Singh, Y. P., Derman, İ. D., Datta, P., & Ozbolat, I. T. (2023) · Biofabrication · doi:10.1088/1758-5090/ad0b3f · Cited by 75
3D Printing of Vascular Tubes Using Bioelastomer Prepolymers by Freeform Reversible Embedding
Savoji, H., Huyer, L. D., Mohammadi, M. H., Lai, B. F. L., Rafatian, N., Bannerman, D., Shoaib, M., Bobicki, E. R., Ramachandran, A., & Radisic, M. (2020) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.9b00676 · Cited by 68
Tailor-Made Polysaccharides for Biomedical Applications
Yazdi, M. K., Seidi, F., Hejna, A., Zarrintaj, P., Rabiee, N., Kucińska‐Lipka, J., Saeb, M. R., & Bencherif, S. A. (2024) · ACS Applied Bio Materials · doi:10.1021/acsabm.3c01199 · Cited by 71
Naghieh, S., Sarker, M. D., Izadifar, M., & Chen, D. (2017) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2017.11.037 · Cited by 72
3D Bioprinting: New Directions in Articular Cartilage Tissue Engineering
O’Connell, G. D., Garcia, J., & Amir, J. (2017) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00587 · Cited by 68
3D bioprinting using a new photo-crosslinking method for muscle tissue restoration
Lee, J., Lee, H., Jin, E., Ryu, D., & Kim, G. (2023) · npj Regenerative Medicine · doi:10.1038/s41536-023-00292-5 · Cited by 68
Biomedical potentials of alginate via physical, chemical, and biological modifications
Li, Q., Xu, D., Dong, Q.-W., Song, X., Chen, Y., & Cui, Y. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.134409 · Cited by 73
3D Patterning within Hydrogels for the Recreation of Functional Biological Environments
Primo, G. A., & Mata, Á. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202009574 · Cited by 66
Willemen, N. G. A., Morsink, M. A. J., Veerman, D., da Silva, C. F., Cardoso, J. C., Souto, E. B., & Severino, P. B. (2021) · Bio-Design and Manufacturing · doi:10.1007/s42242-021-00157-0 · Cited by 66
Recent Advances in Cardiac Patches: Materials, Preparations, and Properties
Zhang, Y., Mu, W., Zhang, Y., He, X., Wang, Y., Ma, H., Zhu, T., Li, A., Hou, Q., Yang, W., et al. (2022) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.2c00348 · Cited by 66
Self-citationLi, J., Moeinzadeh, S., Kim, C., Pan, C., Weale, G., Kim, S., Abrams, G. D., James, A. W., Choo, H., Chan, C., et al. (2022) · Biomaterials · doi:10.1016/j.biomaterials.2022.121969 · Cited by 72
3D printing of living structural biocomposites
Hirsch, M., Lucherini, L., Zhao, R., Saracho, A. C., & Amstad, E. (2023) · Materials Today · doi:10.1016/j.mattod.2023.02.001 · Cited by 68
Biobased polymers for advanced applications: Towards a sustainable future
Gonçalves, R., Serra, J. P., Reizabal, A., Correia, D. M., Fernandes, L. C., Brito‐Pereira, R., Lizundia, E., Costa, C. M., & Lanceros-Méndez, S. (2025) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2025.101934 · Cited by 71
3D bioprinting of molecularly engineered PEG-based hydrogels utilizing gelatin fragments
Piluso, S., Skvortsov, G. A., Altunbek, M., Afghah, F., Khani, N., Koç, B., & Patterson, J. (2021) · Biofabrication · doi:10.1088/1758-5090/ac0ff0 · Cited by 67
In Vivo Bone Tissue Engineering Strategies: Advances and Prospects
Tsiklin, I. L., Shabunin, A. V., Колсанов, А. В., & Volova, L. T. (2022) · Polymers · doi:10.3390/polym14153222 · Cited by 72
Choi, Y. H., Kim, S., Kim, I., Kim, K., Kwon, S. K., & Hwang, N. S.-Y. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.01.057 · Cited by 65
Review of extrusion-based multi-material bioprinting processes
Betancourt, N., & Chen, D. (2022) · Bioprinting · doi:10.1016/j.bprint.2021.e00189 · Cited by 69
Tang, G., Luo, Z., Lian, L., Guo, J., Maharjan, S., Garciamendez‐Mijares, C. E., Wang, M., Li, W., Zhang, Z., Wang, D., et al. (2023) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.2206762120 · Cited by 64
Self-citationApplications of 3D printing in medicine: A review
Dong, C., Petrovic, M., & Davies, I. J. (2024) · Annals of 3D Printed Medicine · doi:10.1016/j.stlm.2024.100149 · Cited by 75
Biosynthetic, biomimetic, and self-assembled vascularized Organ-on-a-Chip systems
Fritschen, A., & Blaeser, A. (2020) · Biomaterials · doi:10.1016/j.biomaterials.2020.120556 · Cited by 61
Li, Y.-C. E., Jodat, Y. A., Samanipour, R., Zorzi, G., Zhu, K., Hirano, M., Chang, K., Arnaout, A., Hassan, S., Matharu, N., et al. (2021) · Biofabrication · doi:10.1088/1758-5090/abc1be · Cited by 61
Self-citation3D bioprinting models of neural tissues: The current state of the field and future directions
la Vega, L. D., Lee, C., Sharma, R., Amereh, M., & Willerth, S. M. (2019) · Brain Research Bulletin · doi:10.1016/j.brainresbull.2019.06.007 · Cited by 61
Gao, Y., & Jin, X. (2019) · Marine Drugs · doi:10.3390/md17100557 · Cited by 62
Engineering the vasculature with additive manufacturing
Vyas, C., Pereira, R. F., Huang, B., Liu, F., Wang, W., & Bártolo, P. (2017) · Current Opinion in Biomedical Engineering · doi:10.1016/j.cobme.2017.05.008 · Cited by 63
Tissue Engineering and Regenerative Medicine 2017: A Year in Review
Park, K. M., Shin, Y. M., Kim, K., & Shin, H. (2018) · Tissue Engineering Part B Reviews · doi:10.1089/ten.teb.2018.0027 · Cited by 61
Metadata
- Authors
- Jia, W., Gungor-Ozkerim, P. S., Zhang, Y. S., Yue, K., Zhu, K., Liu, W., Pi, Q., Byambaa, B., Dokmeci, M. R., Shin, S. R., & Khademhosseini, A.
- Affiliations
- Brigham and Women's Hospital (US)
- Corresponding author
- Zhang, Yu Shrike
- Shin, Su Ryon
- Khademhosseini, Ali
- ORCID
- Venue
- Biomaterials
- Publisher
- Elsevier BV
- Published
- 2016-11
- Volume
- 106
- Pages
- 58-68
- ISSN
- 0142-9612 (ISSN-L)
- PMC
- PMC5300870
- OpenAlex
- W2502401296
- Cited by
- 922
- References
- 67
- Citations by year
- 2026: 37 · 2025: 59 · 2024: 86 · 2023: 97 · 2022: 113 · 2021: 132 · 2020: 121 · 2019: 110 · 2018: 94 · 2017: 68 · 2016: 4
- FWCI
- 44.28
- Type
- journal article
- Language
- en
- Update notices
- erratum (2025-11-01)
- Open access
- bronze
- doi.org
- Licence
- Locations
- Biomaterials (acceptedVersion)
- PubMed (publishedVersion)
- PubMed Central (acceptedVersion)
- Funders
- National Cancer Institute (1K99CA201603-01A1)
- National Institutes of Health (HL099073, EB02597, AR057837, HL092836)
- Natural Sciences and Engineering Research Council of Canada
- National Science Foundation (DMR0847287)
- Türkiye Bilimsel ve Teknolojik Araştırma Kurumu (B.14.2.TBT.0.06.01-219-115543)
- Office of Naval Research
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Health Sciences › Medicine › Surgery › Tissue Engineering and Regenerative Medicine
- Keywords
- 3D bioprinting, perfusable vascular networks, gelatin methacryloyl, sodium alginate, coaxial extrusion, calcium crosslinking, photocrosslinking, endothelial cells, stem cells, vascularized tissue engineering, mechanical strength
- MeSH terms
- Blood Vessels, Cells, Cultured, Equipment Design, Humans, Ink, Organ Culture Techniques, Perfusion, Neovascularization, Physiologic, Bioreactors, Bioartificial Organs, Tissue Engineering, Endothelial Cells, Tissue Scaffolds, Batch Cell Culture Techniques, Printing, Three-Dimensional
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
