The DOI matches its Crossref record; 67 of the 67 references it cites were found in a registry or an index.
Direct 3D bioprinting of perfusable vascular constructs using a blend bioink
Open accessAbstract
Despite the significant technological advancement in tissue engineering, challenges still exist towards the development of complex and fully functional tissue constructs that mimic their natural counterparts. To address these challenges, bioprinting has emerged as an enabling technology to create highly organized three-dimensional (3D) vascular networks within engineered tissue constructs to promote the transport of oxygen, nutrients, and waste products, which can hardly be realized using conventional microfabrication techniques. Here, we report the development of a versatile 3D bioprinting strategy that employs biomimetic biomaterials and an advanced extrusion system to deposit perfusable vascular structures with highly ordered arrangements in a single-step process. In particular, a specially designed cell-responsive bioink consisting of gelatin methacryloyl (GelMA), sodium alginate, and 4-arm poly(ethylene glycol)-tetra-acrylate (PEGTA) was used in combination with a multilayered coaxial extrusion system to achieve direct 3D bioprinting. This blend bioink could be first ionically crosslinked by calcium ions followed by covalent photocrosslinking of GelMA and PEGTA to form stable constructs. The rheological properties of the bioink and the mechanical strengths of the resulting constructs were tuned by the introduction of PEGTA, which facilitated the precise deposition of complex multilayered 3D perfusable hollow tubes. This blend bioink also displayed favorable biological characteristics that supported the spreading and proliferation of encapsulated endothelial and stem cells in the bioprinted constructs, leading to the formation of biologically relevant, highly organized, perfusable vessels. These characteristics make this novel 3D bioprinting technique superior to conventional microfabrication or sacrificial templating approaches for fabrication of the perfusable vasculature. We envision that our advanced bioprinting technology and bioink formulation may also have significant potentials in engineering large-scale vascularized tissue constructs towards applications in organ transplantation and repair.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“In this context, the fast development of new fabrication techniques, such as 3D bioprinting, has led to a general decline in the cost and the specialized work involved in fabricating these chips [65 -67].”
From 3D In Vitro Model (R)evolution: Unveiling Tumor–Stroma Interactions (2021) · cites this paper as [65]
Experimental — accuracy not yet measuredThe cited source says what the claim attributes to it.
In the citing paper
“To this end, considerable efforts were made in developing hydrogel-based inks or printing techniques to enhance 3D stability and shape fidelity, such as printing multimaterial inks with combined nozzle system24, 25, photo-crosslinkable hydrogels17, 26, 27, adding viscosifiers28–30, or printing in sacrificial supporting materials31–33.”
From Fibre-infused gel scaffolds guide cardiomyocyte alignment in 3D-printed ventricles (2023) · cites this paper as [24]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
Hydrogels for biomedical applications
Hoffman, A. S. (2002) · Advanced Drug Delivery Reviews · doi:10.1016/s0169-409x(01)00239-3 · Cited by 4,864
Hydrogels for biomedical applications
Hoffman, A. S. (2012) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2012.09.010 · Cited by 3,396
Synthesis, properties, and biomedical applications of gelatin methacryloyl (GelMA) hydrogels
Yue, K., Trujillo-de Santiago, G., Alvarez, M. M., Tamayol, A., Annabi, N., & Khademhosseini, A. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.08.045 · Cited by 3,146
Self-citationHydrogels in regenerative medicine
Slaughter, B. V., Khurshid, S. S., Fisher, O. Z., Khademhosseini, A., & Peppas, N. A. (2009) · Advanced Materials · doi:10.1002/adma.200802106 · Cited by 2,703
Self-citationA 3D bioprinting system to produce human-scale tissue constructs with structural integrity
Kang, H.-W., Lee, S. J., Ko, I. K., Kengla, C., Yoo, J. J., & Atala, A. (2016) · Nature Biotechnology · doi:10.1038/nbt.3413 · Cited by 2,622
Cell-laden microengineered gelatin methacrylate hydrogels
Nichol, J. W., Koshy, S. T., Bae, H., Hwang, C. M., Yamanlar, S., & Khademhosseini, A. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.03.064 · Cited by 2,377
Self-citationHyaluronic Acid Hydrogels for Biomedical Applications
Burdick, J. A., & Prestwich, G. D. (2011) · Advanced Materials · doi:10.1002/adma.201003963 · Cited by 2,150
3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs
Kolesky, D. B., Truby, R. L., Gladman, A. S., Busbee, T. A., Homan, K. A., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201305506 · Cited by 2,102
Rapid casting of patterned vascular networks for perfusable engineered three-dimensional tissues
Miller, J. S., Stevens, K. R., Yang, M. T., Baker, B. M., Nguyen, D.-H. T., Cohen, D. M., Toro, E., Chen, A. A., Galie, P. A., Yu, X., et al. (2012) · Nature Materials · doi:10.1038/nmat3357 · Cited by 1,917
Research works printed but not linked: 1
- Kolesky, 2014, 3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs, Adv. Mater., 26, 3124, 10.1002/adma.201305506 · DOI · Paper page
Cited by
Sorted by citations
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. Q., & Hui, D. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.02.012 · Cited by 8,431
The bioink: A comprehensive review on bioprintable materials
Hospodiuk, M., Dey, M., Sosnoski, D. M., & Ozbolat, I. T. (2017) · Biotechnology Advances · doi:10.1016/j.biotechadv.2016.12.006 · Cited by 1,168
Bioprinting 3D microfibrous scaffolds for engineering endothelialized myocardium and heart-on-a-chip
Zhang, Y. S., Arneri, A., Bersini, S., Shin, S.-R., Zhu, K., Goli-Malekabadi, Z., Aleman, J., Colosi, C., Busignani, F., Dell’Erba, V., et al. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.09.003 · Cited by 979
Self-citationRecent Developments of Carboxymethyl Cellulose
Rahman, M. S., Hasan, M. S., Nitai, A. S., Nam, S., Karmakar, A. K., Ahsan, M. S., Shiddiky, M. J. A., & Ahmed, M. B. (2021) · Polymers · doi:10.3390/polym13081345 · Cited by 893
3D printing of hydrogels: Rational design strategies and emerging biomedical applications
Li, J., Wu, C., Chu, P. K.-H., & Gelinsky, M. (2020) · Materials Science and Engineering R Reports · doi:10.1016/j.mser.2020.100543 · Cited by 899
Recent trends in bioinks for 3D printing
Janarthanan, G., & Noh, I. (2018) · Biomaterials Research · doi:10.1186/s40824-018-0122-1 · Cited by 884
Lu, P., Ruan, D., Huang, M., Tian, M., Zhu, K., Gan, Z., & Xiao, Z. (2024) · Signal Transduction and Targeted Therapy · doi:10.1038/s41392-024-01852-x · Cited by 762
Self-citationApplications of Alginate-Based Bioinks in 3D Bioprinting
Axpe, E., & Oyen, M. L. (2016) · International Journal of Molecular Sciences · doi:10.3390/ijms17121976 · Cited by 687
Cell-laden hydrogels for osteochondral and cartilage tissue engineering
Yang, J., Zhang, Y. S., Yue, K., & Khademhosseini, A. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.01.036 · Cited by 652
Self-citationAlginate and alginate composites for biomedical applications
Raus, R. A., Nawawi, W. M. F. W., & Nasaruddin, R. R. (2020) · Asian Journal of Pharmaceutical Sciences · doi:10.1016/j.ajps.2020.10.001 · Cited by 655
Fabrication of Scaffolds for Bone-Tissue Regeneration
Chocholata, P. K., Kulda, V., & Babuška, V. (2019) · Materials · doi:10.3390/ma12040568 · Cited by 607
Direct 3D bioprinting of prevascularized tissue constructs with complex microarchitecture
Zhu, W. Z., Qu, X., Zhu, J., Ma, X., Patel, S. H., Liu, J., Wang, P., Lai, C. S. E., Gou, M., Xu, Y., et al. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2017.01.042 · Cited by 590
Review of alginate-based hydrogel bioprinting for application in tissue engineering
Rastogi, P., & Kandasubramanian, B. (2019) · Biofabrication · doi:10.1088/1758-5090/ab331e · Cited by 588
Unagolla, J. M., & Jayasuriya, A. C. (2019) · Applied Materials Today · doi:10.1016/j.apmt.2019.100479 · Cited by 567
Bioinks and bioprinting technologies to make heterogeneous and biomimetic tissue constructs
Ashammakhi, N., Ahadian, S., Xu, C., Montazerian, H., Ko, H., Nasiri, R., Barros, N., & Khademhosseini, A. (2019) · Materials Today Bio · doi:10.1016/j.mtbio.2019.100008 · Cited by 549
Self-citation3D Bioprinting for Organ Regeneration
Cui, H., Nowicki, M. A., Fisher, J. P., & Zhang, L. G. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201601118 · Cited by 552
Recent Advances in Biomaterials for 3D Printing and Tissue Engineering
Jammalamadaka, U. M., & Tappa, K. K. (2018) · Journal of Functional Biomaterials · doi:10.3390/jfb9010022 · Cited by 541
Development of 3D bioprinting: From printing methods to biomedical applications
Gu, Z., Fu, J., Lin, H. M., & He, Y. (2019) · Asian Journal of Pharmaceutical Sciences · doi:10.1016/j.ajps.2019.11.003 · Cited by 540
Extrusion Bioprinting of Shear‐Thinning Gelatin Methacryloyl Bioinks
Liu, W. H., Heinrich, M. A., Zhou, Y., Akpek, A., Hu, N., Liu, X., Guan, X., Zhong, Z., Jin, X., Khademhosseini, A., et al. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201601451 · Cited by 523
Self-citation4D Biofabrication Using Shape‐Morphing Hydrogels
Kirillova, A., Maxson, R., Stoychev, G. V., Gomillion, C. T., & Ionov, L. (2017) · Advanced Materials · doi:10.1002/adma.201703443 · Cited by 509
‘Printability' of Candidate Biomaterials for Extrusion Based 3D Printing: State‐of‐the‐Art
Kyle, S., Jessop, Z. M., Al‐Sabah, A., & Whitaker, I. S. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201700264 · Cited by 518
From Shape to Function: The Next Step in Bioprinting
Levato, R., Jüngst, T., Scheuring, R. G., Blunk, T., Gröll, J., & Malda, J. (2020) · Advanced Materials · doi:10.1002/adma.201906423 · Cited by 493
Sun, M., Sun, X., Wang, Z., Guo, S., Yu, G., & Yang, H. (2018) · Polymers · doi:10.3390/polym10111290 · Cited by 453
3D Bioprinting: from Benches to Translational Applications
Heinrich, M. A., Liu, W. H., Jimenez, A., Yang, J., Akpek, A., Liu, X., Pi, Q., Mu, X., Hu, N., Schiffelers, R. M., et al. (2019) · Small · doi:10.1002/smll.201805510 · Cited by 455
Self-citationAdvances in Regenerative Medicine and Tissue Engineering: Innovation and Transformation of Medicine
Dzobo, K., Thomford, N. E., Senthebane, D. A., Shipanga, H., Rowe, A., Dandara, C., Pillay, M., & Motaung, K. S. (2018) · Stem Cells International · doi:10.1155/2018/2495848 · Cited by 477
Bioprinting for vascular and vascularized tissue biofabrication
Datta, P., Ayan, B., & Ozbolat, I. T. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.01.035 · Cited by 431
Engineered materials for organoid systems
Kratochvil, M. J., Seymour, A. J., Li, T. L., Pașca, S. P., Kuo, C. J., & Heilshorn, S. C. (2019) · Nature Reviews Materials · doi:10.1038/s41578-019-0129-9 · Cited by 430
Recent Advances in Photo-Crosslinkable Hydrogels for Biomedical Applications
Choi, J. R., Yong, K. W., Choi, J. Y., & Cowie, A. C. (2019) · BioTechniques · doi:10.2144/btn-2018-0083 · Cited by 403
3D In Vitro Model (R)evolution: Unveiling Tumor–Stroma Interactions
Rodrigues, J., Heinrich, M. A., Teixeira, L. M., & Prakash, J. (2021) · Trends in Cancer · doi:10.1016/j.trecan.2020.10.009 · Cited by 405
Ma, X., Liu, J., Zhu, W. Z., Tang, M., Lawrence, N., Yu, C., Gou, M., & Chen, S. (2018) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2018.06.011 · Cited by 417
Crosslinking Strategies for 3D Bioprinting of Polymeric Hydrogels
GhavamiNejad, A., Ashammakhi, N. A., Wu, X. Y., & Khademhosseini, A. (2020) · Small · doi:10.1002/smll.202002931 · Cited by 426
Self-citationZhang, Y. S., Haghiashtiani, G., Hübscher, T., Kelly, D. J., Lee, J. M., Lütolf, M. P., McAlpine, M. C., Yeong, W. Y., Zenobi‐Wong, M., & Malda, J. (2021) · Nature Reviews Methods Primers · doi:10.1038/s43586-021-00073-8 · Cited by 428
Self-citationBioprinted Osteogenic and Vasculogenic Patterns for Engineering 3D Bone Tissue
Byambaa, B., Annabi, N., Yue, K., Santiago, G. T., Álvarez, M. M., Jia, W., Kazemzadeh‐Narbat, M., Shin, S. R., Tamayol, A., & Khademhosseini, A. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201700015 · Cited by 403
Self-citationGold Nanocomposite Bioink for Printing 3D Cardiac Constructs
Zhu, K., Shin, S. R., van Kempen, T., Li, Y., Ponraj, V., Nasajpour, A., Mandla, S., Hu, N., Liu, X., Leijten, J., et al. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201605352 · Cited by 391
Self-citationAdvances in Extrusion 3D Bioprinting: A Focus on Multicomponent Hydrogel‐Based Bioinks
Cui, X., Li, J., Hartanto, Y., Durham, M., Tang, J., Zhang, H., Hooper, G. J., Lim, K. S., & Woodfield, T. B. F. (2020) · Advanced Healthcare Materials · doi:10.1002/adhm.201901648 · Cited by 407
Bio-inks for 3D bioprinting: recent advances and future prospects
Donderwinkel, I., van Hest, J. C. M., & Cameron, N. R. (2017) · Polymer Chemistry · doi:10.1039/c7py00826k · Cited by 391
Tumor microenvironment: barrier or opportunity towards effective cancer therapy
Tiwari, A., Trivedi, R., & Lin, S. (2022) · Journal of Biomedical Science · doi:10.1186/s12929-022-00866-3 · Cited by 399
Shear-Thinning and Thermo-Reversible Nanoengineered Inks for 3D Bioprinting
Wilson, S. A., Cross, L., Peak, C. W., & Gaharwar, A. K. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b13602 · Cited by 370
Askari, M., Afzali Naniz, M., Kouhi, M., Saberi, A., Zolfagharian, A., & Bodaghi, M. (2021) · Biomaterials Science · doi:10.1039/d0bm00973c · Cited by 369
Tissue Engineering and Regenerative Medicine: Achievements, Future, and Sustainability in Asia
Han, F., Wang, J., Ding, L., Hu, Y., Li, W., Yuan, Z., Guo, Q., Zhu, C., Yu, L., Wang, H., et al. (2020) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2020.00083 · Cited by 382
Bioprinting: From Tissue and Organ Development to in Vitro Models
Mota, C., Camarero‐Espinosa, S., Baker, M. B., Wieringa, P. A., & Moroni, L. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00789 · Cited by 359
Gao, G., Lee, J. H., Jang, J., Lee, D., Kong, J., Kim, B. S., Choi, Y., Jang, W. B., Hong, Y. J., Kwon, S., et al. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201700798 · Cited by 340
3D Bioprinting for Cartilage and Osteochondral Tissue Engineering
Daly, A. C., Freeman, F. E., Gonzalez‐Fernandez, T., Critchley, S. E., Nulty, J. M., & Kelly, D. J. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201700298 · Cited by 351
3D Printability of Alginate-Carboxymethyl Cellulose Hydrogel
Habib, A., Sathish, V., Mallik, S., & Khoda, B. (2018) · Materials · doi:10.3390/ma11030454 · Cited by 332
Gelatin-Based Hydrogels for Organ 3D Bioprinting
Wang, X., Ao, Q., Tian, X., Fan, J., Tong, H., Hou, W., & Bai, S. (2017) · Polymers · doi:10.3390/polym9090401 · Cited by 317
3D‐Bioprinted Mini‐Brain: A Glioblastoma Model to Study Cellular Interactions and Therapeutics
Heinrich, M. A., Bansal, R., Lammers, T., Zhang, Y. S., Schiffelers, R. M., & Prakash, J. (2019) · Advanced Materials · doi:10.1002/adma.201806590 · Cited by 327
Self-citationDigitally Tunable Microfluidic Bioprinting of Multilayered Cannular Tissues
Pi, Q., Maharjan, S., Xiang, Y., Liu, X., Singh, B., van Genderen, A. M., Robledo‐Padilla, F., Parra‐Saldívar, R., Hu, N., Jia, W., et al. (2018) · Advanced Materials · doi:10.1002/adma.201706913 · Cited by 307
Self-citationBiomedical applications of gelatin methacryloyl hydrogels
Piao, Y., You, H., Xu, T., Bei, H., Piwko, I. Z., Kwan, Y. Y., & Zhao, X. (2021) · Engineered Regeneration · doi:10.1016/j.engreg.2021.03.002 · Cited by 300
3D Bioprinting in Skeletal Muscle Tissue Engineering
Ostrovidov, S., Salehi, S., Costantini, M., Suthiwanich, K., Ebrahimi, M., Sadeghian, R. B., Fujie, T., Shi, X., Cannata, S. M., Gargioli, C., et al. (2019) · Small · doi:10.1002/smll.201805530 · Cited by 296
Self-citationEngineering Organoid Vascularization
Grebenyuk, S., & Ranga, A. (2019) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2019.00039 · Cited by 295
Kim, B. S., Gao, G., Kim, J. Y., & Cho, D. (2018) · Advanced Healthcare Materials · doi:10.1002/adhm.201801019 · Cited by 292
Liu, W. H., Zhong, Z., Hu, N., Zhou, Y., Maggio, L., Miri, A. K., Fragasso, A., Jin, X., Khademhosseini, A., & Zhang, Y. S. (2017) · Biofabrication · doi:10.1088/1758-5090/aa9d44 · Cited by 286
Self-citation3D neural tissue models: From spheroids to bioprinting
Zhuang, P., Sun, A. X., An, J., Chua, C. K., & Chew, S. Y. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2017.10.002 · Cited by 269
Emerging Technologies in Multi‐Material Bioprinting
Ravanbakhsh, H., Karamzadeh, V., Bao, G., Mongeau, L., Juncker, D., & Zhang, Y. S. (2021) · Advanced Materials · doi:10.1002/adma.202104730 · Cited by 280
Self-citationMultiscale bioprinting of vascularized models
Miri, A. K., Khalilpour, A., Çeçen, B., Maharjan, S., Shin, S. R., & Khademhosseini, A. (2018) · Biomaterials · doi:10.1016/j.biomaterials.2018.08.006 · Cited by 277
Self-citationCheng, H., Yue, K., Kazemzadeh‐Narbat, M., Liu, Y., Khalilpour, A., Li, B., Zhang, Y. S., Annabi, N., & Khademhosseini, A. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b16779 · Cited by 267
Self-citationXu, W., Molino, B. Z., Cheng, F., Molino, P. J., Yue, Z., Su, D., Wang, X., Willför, S. M., Xu, C., & Wallace, G. G. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b21268 · Cited by 270
Tissue engineering by decellularization and 3D bioprinting
Garreta, E., Oria, R., Tarantino, C., Pla‐Roca, M., Prado, P., Fernández‐Avilés, F., Campistol, J. M., Samitier, J., & Montserrat, N. (2017) · Materials Today · doi:10.1016/j.mattod.2016.12.005 · Cited by 273
Multifunctional Micro/Nanoscale Fibers Based on Microfluidic Spinning Technology
Du, X., Li, Q. F., Wu, G., & Chen, S. (2019) · Advanced Materials · doi:10.1002/adma.201903733 · Cited by 269
Biomaterials-based 3D cell printing for next-generation therapeutics and diagnostics
Jang, J., Park, J. Y., Gao, G., & Cho, D. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2017.11.030 · Cited by 254
3D printing of hydrogel composite systems: Recent advances in technology for tissue engineering
Jang, T., Jung, H., Pan, H. M., Han, W. T., Chen, S., & Song, J. (2018) · International Journal of Bioprinting · doi:10.18063/ijb.v4i1.126 · Cited by 262
Nanoengineered Ionic–Covalent Entanglement (NICE) Bioinks for 3D Bioprinting
Chimene, D., Peak, C. W., Gentry, J. L., Carrow, J. K., Cross, L., Mondragón, E., Cardoso, G. B. C., Kaunas, R. R., & Gaharwar, A. K. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b19808 · Cited by 249
3D printing of complex GelMA-based scaffolds with nanoclay
Gao, Q., Niu, X., Shao, L., Zhou, L., Lin, Z., Sun, A., Fu, J., Chen, Z., Hu, J. P., Liu, Y., et al. (2019) · Biofabrication · doi:10.1088/1758-5090/ab0cf6 · Cited by 250
Extrusion bioprinting of soft materials: An emerging technique for biological model fabrication
Jiang, T., Munguia-López, J. G., Flores-Torres, S., Kort-Mascort, J., & Kinsella, J. M. (2019) · Applied Physics Reviews · doi:10.1063/1.5059393 · Cited by 251
Extrusion bioprinting: Recent progress, challenges, and future opportunities
Ramesh, S., Harrysson, O. L. A., Rao, P., Tamayol, A., Cormier, D., Zhang, Y., & Rivero, I. V. (2020) · Bioprinting · doi:10.1016/j.bprint.2020.e00116 · Cited by 255
Self-citationComplex 3D‐Printed Microchannels within Cell‐Degradable Hydrogels
Song, K. H., Highley, C. B., Rouff, A., & Burdick, J. A. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201801331 · Cited by 246
A Review on the Adaption of Alginate-Gelatin Hydrogels for 3D Cultures and Bioprinting
Łabowska, M. B., Cierluk, K., Jankowska, A. M., Kulbacka, J., Detyna, J. D., & Michalak, I. (2021) · Materials · doi:10.3390/ma14040858 · Cited by 256
3D bioprinting and the current applications in tissue engineering
Huang, Y., Zhang, X., Gao, G., Yonezawa, T., & Cui, X. (2017) · Biotechnology Journal · doi:10.1002/biot.201600734 · Cited by 244
3D Bioprinting of Cell‐Laden Hydrogels for Improved Biological Functionality
Hull, S. M., Brunel, L. G., & Heilshorn, S. C. (2021) · Advanced Materials · doi:10.1002/adma.202103691 · Cited by 251
Guiding Lights: Tissue Bioprinting Using Photoactivated Materials
Lee, M., Rizzo, R., Surman, F., & Zenobi‐Wong, M. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00077 · Cited by 243
Advances in 3D bioprinting of tissues/organs for regenerative medicine and in-vitro models
Jain, P., Kathuria, H., & Dubey, N. (2022) · Biomaterials · doi:10.1016/j.biomaterials.2022.121639 · Cited by 251
Additive Manufacturing of Precision Biomaterials
Guzzi, E. A., & Tibbitt, M. W. (2019) · Advanced Materials · doi:10.1002/adma.201901994 · Cited by 246
Wang, Y., Ma, M., Wang, J., Zhang, W., Lu, W., Gao, Y., Zhang, B., & Guo, Y. (2018) · Materials · doi:10.3390/ma11081345 · Cited by 234
Microfluidic bioprinting of tough hydrogel-based vascular conduits for functional blood vessels
Wang, D., Maharjan, S., Kuang, X., Wang, Z., Mille, L. S., Tao, M., Yu, P., Cao, X., Lian, L., Lv, L., et al. (2022) · Science Advances · doi:10.1126/sciadv.abq6900 · Cited by 235
Self-citationRecent Trends in Decellularized Extracellular Matrix Bioinks for 3D Printing: An Updated Review
Dzobo, K., Motaung, K. S., & Adesida, A. B. (2019) · International Journal of Molecular Sciences · doi:10.3390/ijms20184628 · Cited by 243
Complexation-induced resolution enhancement of 3D-printed hydrogel constructs
Gong, J., Schuurmans, C. C. L., van Genderen, A. M., Cao, X., Li, W., Cheng, F., He, J. J., López, A., Huerta, V., Manríquez, J., et al. (2020) · Nature Communications · doi:10.1038/s41467-020-14997-4 · Cited by 240
Self-citationBom, S., Ribeiro, R., Ribeiro, H. M., Santos, C., & Marto, J. (2022) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2022.121506 · Cited by 230
Ahmed, G. H. (2023) · Journal of Building Engineering · doi:10.1016/j.jobe.2023.105863 · Cited by 245
Chemical insights into bioinks for 3D printing
Valot, L., Martínez, J., Mehdi, A., & Subra, G. (2019) · Chemical Society Reviews · doi:10.1039/c7cs00718c · Cited by 228
3D printed microchannel networks to direct vascularisation during endochondral bone repair
Daly, A. C., Pitacco, P., Nulty, J. M., Cunniffe, G. M., & Kelly, D. J. (2018) · Biomaterials · doi:10.1016/j.biomaterials.2018.01.057 · Cited by 221
Extrusion and Microfluidic‐Based Bioprinting to Fabricate Biomimetic Tissues and Organs
Davoodi, E., Sarikhani, E., Montazerian, H., Ahadian, S., Costantini, M., Święszkowski, W., Willerth, S. M., Walus, K., Mofidfar, M., Toyserkani, E., et al. (2020) · Advanced Materials Technologies · doi:10.1002/admt.201901044 · Cited by 228
Self-citationNoh, I., Kim, N., Tran, H. N., Lee, J., & Lee, C. (2019) · Biomaterials Research · doi:10.1186/s40824-018-0152-8 · Cited by 215
Trends in 3D Printing Processes for Biomedical Field: Opportunities and Challenges
Ghilan, A., Chiriac, A. P., Nita, L. E., Rusu, A. G., Neamţu, I., & Chiriac, V. M. (2020) · Journal of Polymers and the Environment · doi:10.1007/s10924-020-01722-x · Cited by 225
Three-dimensional bioprinting of gelatin methacryloyl (GelMA)
Ying, G., Jiang, N., Yu, C., & Zhang, Y. S. (2018) · Bio-Design and Manufacturing · doi:10.1007/s42242-018-0028-8 · Cited by 215
Self-citationRecent Advances in Enabling Technologies in 3D Printing for Precision Medicine
Prendergast, M. E., & Burdick, J. A. (2019) · Advanced Materials · doi:10.1002/adma.201902516 · Cited by 218
Fibre-infused gel scaffolds guide cardiomyocyte alignment in 3D-printed ventricles
Choi, S., Lee, K. Y., Kim, S. L., MacQueen, L. A., Chang, H., Zimmerman, J. F., Jin, Q., Peters, M. M., Ardoña, H. A. M., Liu, X., et al. (2023) · Nature Materials · doi:10.1038/s41563-023-01611-3 · Cited by 212
Advanced Bottom‐Up Engineering of Living Architectures
Gaspar, V. M., Lavrador, P., Borges, J., Oliveira, M. B., & Mano, J. F. (2019) · Advanced Materials · doi:10.1002/adma.201903975 · Cited by 207
Skin tissue engineering using 3D bioprinting: An evolving research field
Tarassoli, S. P., Jessop, Z. M., Al‐Sabah, A., Gao, N., Whitaker, S., Doak, S. H., & Whitaker, I. S. (2017) · Journal of Plastic Reconstructive & Aesthetic Surgery · doi:10.1016/j.bjps.2017.12.006 · Cited by 209
Development of hydrogels for regenerative engineering
Guan, X., Avci‐Adali, M., Alarçın, E., Cheng, H., Kashaf, S. S., Li, Y., Chawla, A., Jang, H. L., & Khademhosseini, A. (2017) · Biotechnology Journal · doi:10.1002/biot.201600394 · Cited by 205
Self-citationMulticellular Vascularized Engineered Tissues through User‐Programmable Biomaterial Photodegradation
Arakawa, C. K., Badeau, B. A., Zheng, Y. Y., & DeForest, C. A. (2017) · Advanced Materials · doi:10.1002/adma.201703156 · Cited by 202
Silk‐Based Bioinks for 3D Bioprinting
Chawla, S., Midha, S., Sharma, A., & Ghosh, S. (2018) · Advanced Healthcare Materials · doi:10.1002/adhm.201701204 · Cited by 205
Bioprinting 101: Design, Fabrication, and Evaluation of Cell-Laden 3D Bioprinted Scaffolds
Deo, K. A., Singh, K. A., Peak, C. W., Alge, D. L., & Gaharwar, A. K. (2020) · Tissue Engineering Part A · doi:10.1089/ten.tea.2019.0298 · Cited by 199
A Tumor‐on‐a‐Chip System with Bioprinted Blood and Lymphatic Vessel Pair
Cao, X., Ashfaq, R., Cheng, F., Maharjan, S., Li, J., Ying, G., Hassan, S., Xiao, H., Yue, K., & Zhang, Y. S. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201807173 · Cited by 201
Self-citationFrom Arteries to Capillaries: Approaches to Engineering Human Vasculature
Fleischer, S., Tavakol, D. N., & Vunjak‐Novakovic, G. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201910811 · Cited by 208
GelMA-collagen blends enable drop-on-demand 3D printablility and promote angiogenesis
Stratesteffen, H., Köpf, M., Kreimendahl, F., Blaeser, A., Jockenhoevel, S., & Fischer, H. (2017) · Biofabrication · doi:10.1088/1758-5090/aa857c · Cited by 202
Engineering biofunctional in vitro vessel models using a multilayer bioprinting technique
Schöneberg, J., Lorenzi, F. D., Theek, B., Blaeser, A., Rommel, D., Kuehne, A. J. C., Kiessling, F. M., & Fischer, H. (2018) · Scientific Reports · doi:10.1038/s41598-018-28715-0 · Cited by 205
Materials and technical innovations in 3D printing in biomedical applications
Tetsuka, H., & Shin, S. R. (2020) · Journal of Materials Chemistry B · doi:10.1039/d0tb00034e · Cited by 203
Self-citation3D Bioprinting: A Novel Avenue for Manufacturing Tissues and Organs
Zhang, B., Gao, L., Ma, L., Luo, Y., Yang, H., & Cui, Z. (2019) · Engineering · doi:10.1016/j.eng.2019.03.009 · Cited by 201
Spatially and temporally controlled hydrogels for tissue engineering
Leijten, J., Seo, J., Yue, K., Santiago, G. T., Tamayol, A., Ruiz‐Esparza, G. U., Shin, S. R., Sharifi, R., Noshadi, I., Álvarez, M. M., et al. (2017) · Materials Science and Engineering R Reports · doi:10.1016/j.mser.2017.07.001 · Cited by 197
Self-citation(Photo-)crosslinkable gelatin derivatives for biofabrication applications
Hoorick, J. V., Tytgat, L., Dobos, A., Ottevaere, H., Erps, J. V., Hugo Thienpont, A., Ovsianikov, A., Dubruel, P., & Vlierberghe, S. V. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.07.035 · Cited by 205
Metadata
- Authors
- Jia, W., Gungor-Ozkerim, P. S., Zhang, Y. S., Yue, K., Zhu, K., Liu, W., Pi, Q., Byambaa, B., Dokmeci, M. R., Shin, S. R., & Khademhosseini, A.
- Affiliations
- Brigham and Women's Hospital (US)
- Corresponding author
- Zhang, Yu Shrike
- Shin, Su Ryon
- Khademhosseini, Ali
- ORCID
- Venue
- Biomaterials
- Publisher
- Elsevier BV
- Published
- 2016-11
- Volume
- 106
- Pages
- 58-68
- ISSN
- 0142-9612 (ISSN-L)
- PMC
- PMC5300870
- OpenAlex
- W2502401296
- Cited by
- 922
- References
- 67
- Citations by year
- 2026: 37 · 2025: 59 · 2024: 86 · 2023: 97 · 2022: 113 · 2021: 132 · 2020: 121 · 2019: 110 · 2018: 94 · 2017: 68 · 2016: 4
- FWCI
- 44.28
- Type
- journal article
- Language
- en
- Update notices
- erratum (2025-11-01)
- Open access
- bronze
- doi.org
- Licence
- Locations
- Biomaterials (acceptedVersion)
- PubMed (publishedVersion)
- PubMed Central (acceptedVersion)
- Funders
- National Cancer Institute (1K99CA201603-01A1)
- National Institutes of Health (HL099073, EB02597, AR057837, HL092836)
- Natural Sciences and Engineering Research Council of Canada
- National Science Foundation (DMR0847287)
- Türkiye Bilimsel ve Teknolojik Araştırma Kurumu (B.14.2.TBT.0.06.01-219-115543)
- Office of Naval Research
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Health Sciences › Medicine › Surgery › Tissue Engineering and Regenerative Medicine
- Keywords
- 3D bioprinting, perfusable vascular networks, gelatin methacryloyl, sodium alginate, coaxial extrusion, calcium crosslinking, photocrosslinking, endothelial cells, stem cells, vascularized tissue engineering, mechanical strength
- MeSH terms
- Blood Vessels, Cells, Cultured, Equipment Design, Humans, Ink, Organ Culture Techniques, Perfusion, Neovascularization, Physiologic, Bioreactors, Bioartificial Organs, Tissue Engineering, Endothelial Cells, Tissue Scaffolds, Batch Cell Culture Techniques, Printing, Three-Dimensional
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
