The DOI matches its Crossref record; 67 of the 67 references it cites were found in a registry or an index.
Direct 3D bioprinting of perfusable vascular constructs using a blend bioink
Open accessAbstract
Despite the significant technological advancement in tissue engineering, challenges still exist towards the development of complex and fully functional tissue constructs that mimic their natural counterparts. To address these challenges, bioprinting has emerged as an enabling technology to create highly organized three-dimensional (3D) vascular networks within engineered tissue constructs to promote the transport of oxygen, nutrients, and waste products, which can hardly be realized using conventional microfabrication techniques. Here, we report the development of a versatile 3D bioprinting strategy that employs biomimetic biomaterials and an advanced extrusion system to deposit perfusable vascular structures with highly ordered arrangements in a single-step process. In particular, a specially designed cell-responsive bioink consisting of gelatin methacryloyl (GelMA), sodium alginate, and 4-arm poly(ethylene glycol)-tetra-acrylate (PEGTA) was used in combination with a multilayered coaxial extrusion system to achieve direct 3D bioprinting. This blend bioink could be first ionically crosslinked by calcium ions followed by covalent photocrosslinking of GelMA and PEGTA to form stable constructs. The rheological properties of the bioink and the mechanical strengths of the resulting constructs were tuned by the introduction of PEGTA, which facilitated the precise deposition of complex multilayered 3D perfusable hollow tubes. This blend bioink also displayed favorable biological characteristics that supported the spreading and proliferation of encapsulated endothelial and stem cells in the bioprinted constructs, leading to the formation of biologically relevant, highly organized, perfusable vessels. These characteristics make this novel 3D bioprinting technique superior to conventional microfabrication or sacrificial templating approaches for fabrication of the perfusable vasculature. We envision that our advanced bioprinting technology and bioink formulation may also have significant potentials in engineering large-scale vascularized tissue constructs towards applications in organ transplantation and repair.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“In this context, the fast development of new fabrication techniques, such as 3D bioprinting, has led to a general decline in the cost and the specialized work involved in fabricating these chips [65 -67].”
From 3D In Vitro Model (R)evolution: Unveiling Tumor–Stroma Interactions (2021) · cites this paper as [65]
Experimental — accuracy not yet measuredThe cited source says what the claim attributes to it.
In the citing paper
“To this end, considerable efforts were made in developing hydrogel-based inks or printing techniques to enhance 3D stability and shape fidelity, such as printing multimaterial inks with combined nozzle system24, 25, photo-crosslinkable hydrogels17, 26, 27, adding viscosifiers28–30, or printing in sacrificial supporting materials31–33.”
From Fibre-infused gel scaffolds guide cardiomyocyte alignment in 3D-printed ventricles (2023) · cites this paper as [24]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
Hydrogels for biomedical applications
Hoffman, A. S. (2002) · Advanced Drug Delivery Reviews · doi:10.1016/s0169-409x(01)00239-3 · Cited by 4,864
Hydrogels for biomedical applications
Hoffman, A. S. (2012) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2012.09.010 · Cited by 3,396
Synthesis, properties, and biomedical applications of gelatin methacryloyl (GelMA) hydrogels
Yue, K., Trujillo-de Santiago, G., Alvarez, M. M., Tamayol, A., Annabi, N., & Khademhosseini, A. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.08.045 · Cited by 3,146
Self-citationHydrogels in regenerative medicine
Slaughter, B. V., Khurshid, S. S., Fisher, O. Z., Khademhosseini, A., & Peppas, N. A. (2009) · Advanced Materials · doi:10.1002/adma.200802106 · Cited by 2,703
Self-citationA 3D bioprinting system to produce human-scale tissue constructs with structural integrity
Kang, H.-W., Lee, S. J., Ko, I. K., Kengla, C., Yoo, J. J., & Atala, A. (2016) · Nature Biotechnology · doi:10.1038/nbt.3413 · Cited by 2,622
Cell-laden microengineered gelatin methacrylate hydrogels
Nichol, J. W., Koshy, S. T., Bae, H., Hwang, C. M., Yamanlar, S., & Khademhosseini, A. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.03.064 · Cited by 2,377
Self-citationHyaluronic Acid Hydrogels for Biomedical Applications
Burdick, J. A., & Prestwich, G. D. (2011) · Advanced Materials · doi:10.1002/adma.201003963 · Cited by 2,150
3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs
Kolesky, D. B., Truby, R. L., Gladman, A. S., Busbee, T. A., Homan, K. A., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201305506 · Cited by 2,102
Rapid casting of patterned vascular networks for perfusable engineered three-dimensional tissues
Miller, J. S., Stevens, K. R., Yang, M. T., Baker, B. M., Nguyen, D.-H. T., Cohen, D. M., Toro, E., Chen, A. A., Galie, P. A., Yu, X., et al. (2012) · Nature Materials · doi:10.1038/nmat3357 · Cited by 1,917
Research works printed but not linked: 1
- Kolesky, 2014, 3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs, Adv. Mater., 26, 3124, 10.1002/adma.201305506 · DOI · Paper page
Cited by
Sorted by citations
Items 101–200 of 919
Directly coaxial 3D bioprinting of large-scale vascularized tissue constructs
Shao, L., Gao, Q., Xie, C., Fu, J., Xiang, M., & He, Y. (2020) · Biofabrication · doi:10.1088/1758-5090/ab7e76 · Cited by 195
Materials roles for promoting angiogenesis in tissue regeneration
Lee, J., Parthiban, S. P., Jin, G., Knowles, J. C., & Kim, H. (2020) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100732 · Cited by 194
Chitosan-based inks for 3D printing and bioprinting
Taghizadeh, M., Taghizadeh, A. A., Yazdi, M. K., Zarrintaj, P., Stadler, F. J., Ramsey, J. D., Habibzadeh, S., Rad, S. H., Naderi, G., Saeb, M. R., et al. (2021) · Green Chemistry · doi:10.1039/d1gc01799c · Cited by 194
Gao, G., Park, J. Y., Kim, B. S., Jang, J., & Cho, D. (2018) · Advanced Healthcare Materials · doi:10.1002/adhm.201801102 · Cited by 188
Wei, Q., Zhou, J., An, Y., Li, M., Zhang, J., & Yang, S. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.123450 · Cited by 196
Suntornnond, R., Tan, E. Y. S., An, J., & Chua, C. K. (2017) · Scientific Reports · doi:10.1038/s41598-017-17198-0 · Cited by 184
Augustine, R. (2018) · Progress in Biomaterials · doi:10.1007/s40204-018-0087-0 · Cited by 188
Macroporous Hydrogel Scaffolds for Three-Dimensional Cell Culture and Tissue Engineering
Fan, C., & Wang, D. (2017) · Tissue Engineering Part B Reviews · doi:10.1089/ten.teb.2016.0465 · Cited by 183
Vessel‐on‐a‐chip with Hydrogel‐based Microfluidics
Nie, J., Gao, Q., Wang, Y., Zeng, J., Zhao, H., Sun, Y., Shen, J., Ramezani, H., Fu, Z., Liu, Z., et al. (2018) · Small · doi:10.1002/smll.201802368 · Cited by 188
Angiogenesis in Tissue Engineering: As Nature Intended?
Mastrullo, V., Cathery, W., Velliou, E. G., Madeddu, P. R., & Campagnolo, P. (2020) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2020.00188 · Cited by 193
Tissue Engineering and Regenerative Medicine: New Trends and Directions—A Year in Review
Gomes, M. E., Rodrigues, M. T., Domingues, R. M. A., & Reis, R. L. (2017) · Tissue Engineering Part B Reviews · doi:10.1089/ten.teb.2017.0081 · Cited by 186
Void‐Free 3D Bioprinting for In Situ Endothelialization and Microfluidic Perfusion
Ouyang, L., Armstrong, J. P. K., Chen, Q., Lin, Y., & Stevens, M. M. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201908349 · Cited by 180
Coaxial 3D bioprinting of self-assembled multicellular heterogeneous tumor fibers
Dai, X., Liu, L., Ouyang, J., Li, X., Zhang, X., Lan, Q., & Xu, T. (2017) · Scientific Reports · doi:10.1038/s41598-017-01581-y · Cited by 175
3D bioprinting of skin tissue: From pre-processing to final product evaluation
Yan, W.-C., Davoodi, P., Vijayavenkataraman, S., Tian, Y., Ng, W. C., Fuh, J. Y. H., Robinson, K. S., & Wang, C. (2018) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2018.07.016 · Cited by 174
3D bioprinting: current status and trends—a guide to the literature and industrial practice
Santoni, S., Gugliandolo, S. G., Sponchioni, M., Moscatelli, D., & Colosimo, B. M. (2021) · Bio-Design and Manufacturing · doi:10.1007/s42242-021-00165-0 · Cited by 172
Functionalizing bioinks for 3D bioprinting applications
Parak, A., Pradeep, P., du Toit, L. C., Kumar, P., Choonara, Y. E., & Pillay, V. (2018) · Drug Discovery Today · doi:10.1016/j.drudis.2018.09.012 · Cited by 180
Zhang, J., Wehrle, E., Adamek, P., Paul, G. R., Qin, X., Rubert, M., & Müller, R. (2020) · Acta Biomaterialia · doi:10.1016/j.actbio.2020.07.016 · Cited by 169
Natural Polymers for Organ 3D Bioprinting
Liu, F., Chen, Q., Liu, C., Ao, Q., Tian, X., Fan, J., Tong, H., & Wang, X. (2018) · Polymers · doi:10.3390/polym10111278 · Cited by 170
Engineering of Hydrogel Materials with Perfusable Microchannels for Building Vascularized Tissues
Xie, R., Zheng, W.-C., Guan, L., Ai, Y., & Liang, Q. (2019) · Small · doi:10.1002/smll.201902838 · Cited by 173
Fiber‐Based Mini Tissue with Morphology‐Controllable GelMA Microfibers
Shao, L., Gao, Q., Zhao, H., Xie, C., Fu, J., Liu, Z., Xiang, M., & He, Y. (2018) · Small · doi:10.1002/smll.201802187 · Cited by 162
Current standards and ethical landscape of engineered tissues—3D bioprinting perspective
Sekar, M. P., Budharaju, H., Zennifer, A., Sethuraman, S., Vermeulen, N., Sundaramurthi, D., & Kalaskar, D. M. (2021) · Journal of Tissue Engineering · doi:10.1177/20417314211027677 · Cited by 170
Vascularization in tissue engineering: fundamentals and state-of-art
Yang, G., Mahadik, B. P., Choi, J. Y., & Fisher, J. P. (2019) · Progress in Biomedical Engineering · doi:10.1088/2516-1091/ab5637 · Cited by 173
Recent advances in gelatin-based therapeutics
Echave, M. C., Hernáez‐Moya, R., Iturriaga, L., Pedraz, J. L., Lakshminarayanan, R., Dolatshahi‐Pirouz, A., Taebnia, N., & Orive, G. (2019) · Expert Opinion on Biological Therapy · doi:10.1080/14712598.2019.1610383 · Cited by 156
Fang, W., Yang, M., Wang, L., Li, W., Liu, M., Jin, Y., Wang, Y., Yang, R., Wang, Y., Zhang, K., et al. (2023) · International Journal of Bioprinting · doi:10.18063/ijb.759 · Cited by 178
Advances in hydrogel-based vascularized tissues for tissue repair and drug screening
Wang, Y., Kankala, R. K., Ou, C., Chen, A., & Yang, Z. (2021) · Bioactive Materials · doi:10.1016/j.bioactmat.2021.07.005 · Cited by 162
Ning, L., Sun, H., Lelong, T., Guilloteau, R., Zhu, N., Schreyer, D. J., & Chen, D. (2018) · Biofabrication · doi:10.1088/1758-5090/aacd30 · Cited by 154
Biodegradable thermoresponsive polymers: Applications in drug delivery and tissue engineering
Hogan, K. J., & Mikos, A. G. (2020) · Polymer · doi:10.1016/j.polymer.2020.123063 · Cited by 158
Vascular Tissue Engineering: Challenges and Requirements for an Ideal Large Scale Blood Vessel
Devillard, C. D., & Marquette, C. A. (2021) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2021.721843 · Cited by 152
Advances in 3D Printing for Tissue Engineering
Zaszczyńska, A., Moczulska-Heljak, M., Gradys, A., & Sajkiewicz, P. (2021) · Materials · doi:10.3390/ma14123149 · Cited by 159
3D Bioprinting of Oxygenated Cell‐Laden Gelatin Methacryloyl Constructs
Erdem, A., Darabi, M. A., Nasiri, R., Sangabathuni, S., Ertaş, Y. N., Alem, H., Hosseini, V., Shamloo, A., Nasr, A. S., Ahadian, S., et al. (2020) · Advanced Healthcare Materials · doi:10.1002/adhm.201901794 · Cited by 149
Self-citationHighly Porous Microcarriers for Minimally Invasive In Situ Skeletal Muscle Cell Delivery
Kankala, R. K., Zhao, J., Liu, C., Song, X., Yang, D., Zhu, K., Wang, S., Zhang, Y. S., & Chen, A. (2019) · Small · doi:10.1002/smll.201901397 · Cited by 149
Self-citationGao, G., Kim, H., Kim, B. S., Kong, J. S., Lee, J. Y., Park, B., Chae, S., Kim, J., Ban, K., Jang, J., et al. (2019) · Applied Physics Reviews · doi:10.1063/1.5099306 · Cited by 147
Bio-inspired clamping microneedle arrays from flexible ferrofluid-configured moldings
Zhang, X., Wang, F., Yu, Y., Chen, G., Shang, L., Sun, L., & Zhao, Y. (2019) · 中国科学通报：英文版 · doi:10.1016/j.scib.2019.06.016 · Cited by 146
Bioprinting Vasculature: Materials, Cells and Emergent Techniques
Tomasina, C., Bodet, T., Mota, C., Moroni, L., & Camarero‐Espinosa, S. (2019) · Materials · doi:10.3390/ma12172701 · Cited by 151
Li, L., Qin, S., Peng, J., Chen, A., Nie, Y., Liu, T., & Song, K. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2019.12.174 · Cited by 144
Rheological analysis of bio-ink for 3D bio-printing processes
Habib, M. A., & Khoda, B. (2022) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2022.02.048 · Cited by 144
Large-scale perfused tissues via synthetic 3D soft microfluidics
Grebenyuk, S. E., Fattah, A. R. A., Kumar, M., Toprakhisar, B., Rustandi, G., Vananroye, A., Salmon, I., Verfaillie, C. M., Grillo, M. P., & Ranga, A. (2023) · Nature Communications · doi:10.1038/s41467-022-35619-1 · Cited by 160
Pereira, R. F., Sousa, A., Barrias, C. C., Bártolo, P., & Granja, P. L. (2018) · Materials Horizons · doi:10.1039/c8mh00525g · Cited by 143
Composite Biomaterials as Long‐Lasting Scaffolds for 3D Bioprinting of Highly Aligned Muscle Tissue
García‐Lizarribar, A., Fernández‐Garibay, X., Velasco‐Mallorquí, F., Castaño, A. G., Samitier, J., & Ramón‐Azcón, J. (2018) · Macromolecular Bioscience · doi:10.1002/mabi.201800167 · Cited by 140
Recent advances in 3D bioprinting of vascularized tissues
Zhang, Y., Kumar, P., Lv, S., Xiong, D., Zhao, H., Cai, Z., & Zhao, X. (2020) · Materials & Design · doi:10.1016/j.matdes.2020.109398 · Cited by 148
Self-citationTissue‐Engineered Vascular Grafts: Emerging Trends and Technologies
Gupta, P., & Mandal, B. B. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202100027 · Cited by 151
Recent Advances on Bioprinted Gelatin Methacrylate-Based Hydrogels for Tissue Repair
Rajabi, N., Rezaei, A. A., Kharaziha, M., Bakhsheshi‐Rad, H. R., Luo, H., Ramakrishna, S., & Berto, F. (2021) · Tissue Engineering Part A · doi:10.1089/ten.tea.2020.0350 · Cited by 144
Chemistry from 3D printed objects
Hartings, M. R., & Ahmed, Z. (2019) · Nature Reviews Chemistry · doi:10.1038/s41570-019-0097-z · Cited by 137
Advances in osteobiologic materials for bone substitutes
Hasan, A., Byambaa, B., Morshed, M., Cheikh, M., Shakoor, A., Mustafy, T., & Marei, H. E. S. (2018) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.2677 · Cited by 133
Self-citationWang, Z., Tian, Z., Menard, F., & Kim, K. (2017) · Biofabrication · doi:10.1088/1758-5090/aa83cf · Cited by 135
Biomaterials for Bioprinting Microvasculature
Barrs, R. W., Jia, J., Silver, S. E., Yost, M. J., & Mei, Y. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00027 · Cited by 134
Mechanically reinforced injectable bioactive nanocomposite hydrogels for in-situ bone regeneration
Yu, X., Wang, X., Li, D., Sheng, R., Qian, Y., Zhu, R., Wang, X., & Lin, K. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.132799 · Cited by 130
Current Advances in 3D Bioprinting Technology and Its Applications for Tissue Engineering
Yu, J., Park, S. A., Kim, W. D., Ha, T., Xin, Y.-Z., Lee, J. H., & Lee, D. (2020) · Polymers · doi:10.3390/polym12122958 · Cited by 143
Bioresorbable Polymers: Advanced Materials and 4D Printing for Tissue Engineering
Saska, S., Pilatti, L., Blay, A., & Shibli, J. A. (2021) · Polymers · doi:10.3390/polym13040563 · Cited by 132
Advanced Strategies for 3D Bioprinting of Tissue and Organ Analogs Using Alginate Hydrogel Bioinks
Gao, Q., Kim, B.-S., & Gao, G. (2021) · Marine Drugs · doi:10.3390/md19120708 · Cited by 134
Gao, G., Park, W., Kim, B. S., Ahn, M., Chae, S., Cho, W., Kim, J., Lee, J. Y., Jang, J., & Cho, D. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202008878 · Cited by 129
Porous biomaterials for tissue engineering: a review
Maksoud, F. J., de la Paz, M. F. V., Hann, A. J., Thanarak, J., Reilly, G. C., Claeyssens, F., Green, N. H., & Zhang, Y. S. (2022) · Journal of Materials Chemistry B · doi:10.1039/d1tb02628c · Cited by 130
Self-citationAdvances in Gelatin Bioinks to Optimize Bioprinted Cell Functions
Asim, S., Tabish, T. A., Liaqat, U., Ozbolat, I. T., & Rizwan, M. (2023) · Advanced Healthcare Materials · doi:10.1002/adhm.202203148 · Cited by 141
Recent advances in 3D printing: vascular network for tissue and organ regeneration
Hann, S.-Y., Cui, H., Esworthy, T. J., Miao, S., Zhou, X., Lee, S., Fisher, J. P., & Zhang, L. G. (2019) · Translational research · doi:10.1016/j.trsl.2019.04.002 · Cited by 129
Assembling Living Building Blocks to Engineer Complex Tissues
Ouyang, L., Armstrong, J. P. K., Manuel, S.-S., & Stevens, M. M. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201909009 · Cited by 131
Sun, Y., Yang, C., Zhu, X. H., Wang, J., Liu, X., Yang, X., An, X., Liang, J., Dong, H., Jiang, W., et al. (2019) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.36675 · Cited by 127
Bioorthogonal Strategies for Engineering Extracellular Matrices
Madl, C. M., & Heilshorn, S. C. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201706046 · Cited by 132
Engineering inkjet bioprinting processes toward translational therapies
Angelopoulos, I., Allenby, M. C., Lim, M., & Zamorano, M. (2019) · Biotechnology and Bioengineering · doi:10.1002/bit.27176 · Cited by 125
Gelatin methacryloyl (GelMA)-based biomaterials for bone regeneration
Dong, Z., Yuan, Q., Huang, K., Xu, W., Liu, G., & Gu, Z. (2019) · RSC Advances · doi:10.1039/c9ra02695a · Cited by 123
Freeform, Reconfigurable Embedded Printing of All‐Aqueous 3D Architectures
Luo, G., Yu, Y., Yuan, Y., Chen, X., Liu, Z., & Kong, T. (2019) · Advanced Materials · doi:10.1002/adma.201904631 · Cited by 125
Photo-crosslinkable hydrogel and its biological applications
Wang, Y., Zhang, S., & Wang, J. (2020) · Chinese Chemical Letters · doi:10.1016/j.cclet.2020.11.073 · Cited by 122
3D Cell Printed Tissue Analogues: A New Platform for Theranostics
Choi, Y., Yi, H., Kim, S.-W., & Cho, D. (2017) · Theranostics · doi:10.7150/thno.19396 · Cited by 121
Solid Organ Bioprinting: Strategies to Achieve Organ Function
Jorgensen, A. M., Yoo, J. J., & Atala, A. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00145 · Cited by 125
Hydrogels: The Next Generation Body Materials for Microfluidic Chips?
Nie, J., Fu, J., & He, Y. (2020) · Small · doi:10.1002/smll.202003797 · Cited by 126
Electrospun three-dimensional aligned nanofibrous scaffolds for tissue engineering
Jin, G., He, R., Sha, B., Li, W., Qing, H., Teng, R., & Xu, F. (2018) · Materials Science and Engineering C · doi:10.1016/j.msec.2018.06.065 · Cited by 124
Mahendiran, B., Muthusamy, S., Sampath, S., Jaisankar, S. N., Popat, K. C., Selvakumar, R., & Krishnakumar, G. S. (2021) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2021.04.179 · Cited by 122
3D printing in biomedical engineering: Processes, materials, and applications
Lai, J., Wang, C., & Wang, M. (2021) · Applied Physics Reviews · doi:10.1063/5.0024177 · Cited by 127
Cui, H., Zhu, W., Huang, Y., Liu, C., Yu, Z., Nowicki, M. A., Miao, S., Cheng, Y., Zhou, X., Lee, S.-J., et al. (2019) · Biofabrication · doi:10.1088/1758-5090/ab402c · Cited by 124
3D printing of biomimetic vasculature for tissue regeneration
Lei, D., Yang, Y., Liu, Z., Yang, B., Gong, W., Chen, S., Wang, S., Sun, L., Song, B., Xuan, H., et al. (2019) · Materials Horizons · doi:10.1039/c9mh00174c · Cited by 120
Self-citationNa, K., Shin, S., Lee, H., Shin, D., Baek, J., Kwak, H., Park, M., Shin, J., & Hyun, J. (2018) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2017.12.032 · Cited by 117
Self-citationBioprinting of 3D tissues/organs combined with microfluidics
Ma, J., Wang, Y., & Liu, J. (2018) · RSC Advances · doi:10.1039/c8ra03022g · Cited by 117
Engineering the vasculature for islet transplantation
Bowers, D. T., Song, W., Wang, L., & Ma, M. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.05.051 · Cited by 116
In Vitro Strategies to Vascularize 3D Physiologically Relevant Models
Dellaquila, A., Le Bao, C., Letourneur, D., & Simon‐Yarza, T. (2021) · Advanced Science · doi:10.1002/advs.202100798 · Cited by 115
Quantitative criteria to benchmark new and existing bio-inks for cell compatibility
Dubbin, K., Tabet, A., & Heilshorn, S. C. (2017) · Biofabrication · doi:10.1088/1758-5090/aa869f · Cited by 114
Coaxial bioprinting of cell-laden vascular constructs using a gelatin–tyramine bioink
Hong, S., Kim, J. S., Jung, B.-Y., Won, C. H., & Hwang, C. (2019) · Biomaterials Science · doi:10.1039/c8bm00618k · Cited by 148
Zhang, Y., Chen, H., & Li, J. (2022) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2022.08.171 · Cited by 114
Self-citationA Quantitative Description for Designing the Extrudability of Shear‐Thinning Physical Hydrogels
Hernandez, H. L., Souza, J. W., & Appel, E. A. (2020) · Macromolecular Bioscience · doi:10.1002/mabi.202000295 · Cited by 113
Photo Processing for Biomedical Hydrogels Design and Functionality: A Review
Yao, H., Wang, J., & Mi, S. (2017) · Polymers · doi:10.3390/polym10010011 · Cited by 118
4D Biofabrication: Materials, Methods, and Applications
Ionov, L. (2018) · Advanced Healthcare Materials · doi:10.1002/adhm.201800412 · Cited by 110
Bioprintable tough hydrogels for tissue engineering applications
Dorishetty, P., Dutta, N. K., & Choudhury, N. R. (2020) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2020.102163 · Cited by 114
Future Perspectives in Small-Diameter Vascular Graft Engineering
Mallis, P., Kostakis, A. I., Stavropoulos‐Giokas, C., & Michalopoulos, Ε. (2020) · Bioengineering · doi:10.3390/bioengineering7040160 · Cited by 112
Li, Z., Li, S., Jin, Y., Ha, Y., Zhang, Q., Zhou, X., & He, C. (2022) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2022.119469 · Cited by 110
Li, T., Hou, J., Wang, L., Zeng, G., Wang, Z., Yu, L., Yang, Q., Yin, J., Long, M., Chen, L., et al. (2022) · Acta Biomaterialia · doi:10.1016/j.actbio.2022.08.037 · Cited by 113
Photo-crosslinked synthetic biodegradable polymer networks for biomedical applications
van Bochove, B., & Grijpma, D. W. (2018) · Journal of Biomaterials Science Polymer Edition · doi:10.1080/09205063.2018.1553105 · Cited by 112
Kosik‐Kozioł, A., Costantini, M., Mróz, A., Idaszek, J., Heljak, M. K., Jaroszewicz, J., Kijeńska‐Gawrońska, E., Szöke, K., Frerker, N., Barbetta, A., et al. (2019) · Biofabrication · doi:10.1088/1758-5090/ab15cb · Cited by 111
Solvent-based Extrusion 3D Printing for the Fabrication of Tissue Engineering Scaffolds
Zhang, B., Cristescu, R., Chrisey, D. B., & Narayan, R. J. (2020) · International Journal of Bioprinting · doi:10.18063/ijb.v6i1.211 · Cited by 114
Liang, Q., Gao, F., Zeng, Z., Yang, J., Wu, M., Gao, C., Cheng, D., Pan, H., Liu, W., & Ruan, C. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202001485 · Cited by 109
Self-citationSharma, D., Ross, D., Wang, G., Jia, W., Kirkpatrick, S. J., & Zhao, F. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.03.016 · Cited by 110
Self-citationEngineering of tissue constructs using coaxial bioprinting
Kjar, A., McFarland, B., Mecham, K., Harward, N., & Huang, Y. (2020) · Bioactive Materials · doi:10.1016/j.bioactmat.2020.08.020 · Cited by 110
Alginate Microencapsulation for Three-Dimensional In Vitro Cell Culture
Kang, S., Lee, J., Huh, Y. S., & Takayama, S. (2020) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.0c00457 · Cited by 109
Costantini, M., Colosi, C., Święszkowski, W., & Barbetta, A. (2018) · Biofabrication · doi:10.1088/1758-5090/aae605 · Cited by 113
Qasim, M., Haq, F. U., Kang, M.-H., & Kim, J. (2019) · International Journal of Nanomedicine · doi:10.2147/ijn.s189587 · Cited by 109
3D biofabrication for tubular tissue engineering
Holland, I., Logan, J., Shi, J., McCormick, C., Liu, D., & Shu, W. (2018) · Bio-Design and Manufacturing · doi:10.1007/s42242-018-0013-2 · Cited by 112
Recent Strategies in Extrusion-Based Three-Dimensional Cell Printing toward Organ Biofabrication
Gao, G., Kim, B. S., Jang, J., & Cho, D. (2019) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.8b00691 · Cited by 108
Luo, Y., Zhang, T., & Lin, X. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.132926 · Cited by 106
Fabrication Techniques for Vascular and Vascularized Tissue Engineering
Wang, Z., Mithieux, S. M., & Weiss, A. S. (2019) · Advanced Healthcare Materials · doi:10.1002/adhm.201900742 · Cited by 107
A Beginner’s Guide to the Characterization of Hydrogel Microarchitecture for Cellular Applications
Martinez-Garcia, F. D., Fischer, T., Hayn, A., Mierke, C. T., Burgess, J. K., & Harmsen, M. C. (2022) · Gels · doi:10.3390/gels8090535 · Cited by 119
Cardiac Tissue Engineering on the Nanoscale
Kankala, R. K., Zhu, K., Sun, X., Liu, C., Wang, S., & Chen, A. (2018) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.7b00913 · Cited by 103
Self-citationZhou, M., Lee, B. H., Tan, Y. J., & Tan, L. P. (2019) · Biofabrication · doi:10.1088/1758-5090/ab063f · Cited by 103
Sun, H., Zhang, C., Zhang, B., Song, P., Xu, X., Gui, X., Chen, X., Lu, G., Li, X., Liang, J., et al. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.130961 · Cited by 107
Metadata
- Authors
- Jia, W., Gungor-Ozkerim, P. S., Zhang, Y. S., Yue, K., Zhu, K., Liu, W., Pi, Q., Byambaa, B., Dokmeci, M. R., Shin, S. R., & Khademhosseini, A.
- Affiliations
- Brigham and Women's Hospital (US)
- Corresponding author
- Zhang, Yu Shrike
- Shin, Su Ryon
- Khademhosseini, Ali
- ORCID
- Venue
- Biomaterials
- Publisher
- Elsevier BV
- Published
- 2016-11
- Volume
- 106
- Pages
- 58-68
- ISSN
- 0142-9612 (ISSN-L)
- PMC
- PMC5300870
- OpenAlex
- W2502401296
- Cited by
- 922
- References
- 67
- Citations by year
- 2026: 37 · 2025: 59 · 2024: 86 · 2023: 97 · 2022: 113 · 2021: 132 · 2020: 121 · 2019: 110 · 2018: 94 · 2017: 68 · 2016: 4
- FWCI
- 44.28
- Type
- journal article
- Language
- en
- Update notices
- erratum (2025-11-01)
- Open access
- bronze
- doi.org
- Licence
- Locations
- Biomaterials (acceptedVersion)
- PubMed (publishedVersion)
- PubMed Central (acceptedVersion)
- Funders
- National Cancer Institute (1K99CA201603-01A1)
- National Institutes of Health (HL099073, EB02597, AR057837, HL092836)
- Natural Sciences and Engineering Research Council of Canada
- National Science Foundation (DMR0847287)
- Türkiye Bilimsel ve Teknolojik Araştırma Kurumu (B.14.2.TBT.0.06.01-219-115543)
- Office of Naval Research
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Health Sciences › Medicine › Surgery › Tissue Engineering and Regenerative Medicine
- Keywords
- 3D bioprinting, perfusable vascular networks, gelatin methacryloyl, sodium alginate, coaxial extrusion, calcium crosslinking, photocrosslinking, endothelial cells, stem cells, vascularized tissue engineering, mechanical strength
- MeSH terms
- Blood Vessels, Cells, Cultured, Equipment Design, Humans, Ink, Organ Culture Techniques, Perfusion, Neovascularization, Physiologic, Bioreactors, Bioartificial Organs, Tissue Engineering, Endothelial Cells, Tissue Scaffolds, Batch Cell Culture Techniques, Printing, Three-Dimensional
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
