The DOI matches its Crossref record; 67 of the 67 references it cites were found in a registry or an index.
Direct 3D bioprinting of perfusable vascular constructs using a blend bioink
Open accessAbstract
Despite the significant technological advancement in tissue engineering, challenges still exist towards the development of complex and fully functional tissue constructs that mimic their natural counterparts. To address these challenges, bioprinting has emerged as an enabling technology to create highly organized three-dimensional (3D) vascular networks within engineered tissue constructs to promote the transport of oxygen, nutrients, and waste products, which can hardly be realized using conventional microfabrication techniques. Here, we report the development of a versatile 3D bioprinting strategy that employs biomimetic biomaterials and an advanced extrusion system to deposit perfusable vascular structures with highly ordered arrangements in a single-step process. In particular, a specially designed cell-responsive bioink consisting of gelatin methacryloyl (GelMA), sodium alginate, and 4-arm poly(ethylene glycol)-tetra-acrylate (PEGTA) was used in combination with a multilayered coaxial extrusion system to achieve direct 3D bioprinting. This blend bioink could be first ionically crosslinked by calcium ions followed by covalent photocrosslinking of GelMA and PEGTA to form stable constructs. The rheological properties of the bioink and the mechanical strengths of the resulting constructs were tuned by the introduction of PEGTA, which facilitated the precise deposition of complex multilayered 3D perfusable hollow tubes. This blend bioink also displayed favorable biological characteristics that supported the spreading and proliferation of encapsulated endothelial and stem cells in the bioprinted constructs, leading to the formation of biologically relevant, highly organized, perfusable vessels. These characteristics make this novel 3D bioprinting technique superior to conventional microfabrication or sacrificial templating approaches for fabrication of the perfusable vasculature. We envision that our advanced bioprinting technology and bioink formulation may also have significant potentials in engineering large-scale vascularized tissue constructs towards applications in organ transplantation and repair.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“In this context, the fast development of new fabrication techniques, such as 3D bioprinting, has led to a general decline in the cost and the specialized work involved in fabricating these chips [65 -67].”
From 3D In Vitro Model (R)evolution: Unveiling Tumor–Stroma Interactions (2021) · cites this paper as [65]
Experimental — accuracy not yet measuredThe cited source says what the claim attributes to it.
In the citing paper
“To this end, considerable efforts were made in developing hydrogel-based inks or printing techniques to enhance 3D stability and shape fidelity, such as printing multimaterial inks with combined nozzle system24, 25, photo-crosslinkable hydrogels17, 26, 27, adding viscosifiers28–30, or printing in sacrificial supporting materials31–33.”
From Fibre-infused gel scaffolds guide cardiomyocyte alignment in 3D-printed ventricles (2023) · cites this paper as [24]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
Hydrogels for biomedical applications
Hoffman, A. S. (2002) · Advanced Drug Delivery Reviews · doi:10.1016/s0169-409x(01)00239-3 · Cited by 4,864
Hydrogels for biomedical applications
Hoffman, A. S. (2012) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2012.09.010 · Cited by 3,396
Synthesis, properties, and biomedical applications of gelatin methacryloyl (GelMA) hydrogels
Yue, K., Trujillo-de Santiago, G., Alvarez, M. M., Tamayol, A., Annabi, N., & Khademhosseini, A. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.08.045 · Cited by 3,146
Self-citationHydrogels in regenerative medicine
Slaughter, B. V., Khurshid, S. S., Fisher, O. Z., Khademhosseini, A., & Peppas, N. A. (2009) · Advanced Materials · doi:10.1002/adma.200802106 · Cited by 2,703
Self-citationA 3D bioprinting system to produce human-scale tissue constructs with structural integrity
Kang, H.-W., Lee, S. J., Ko, I. K., Kengla, C., Yoo, J. J., & Atala, A. (2016) · Nature Biotechnology · doi:10.1038/nbt.3413 · Cited by 2,622
Cell-laden microengineered gelatin methacrylate hydrogels
Nichol, J. W., Koshy, S. T., Bae, H., Hwang, C. M., Yamanlar, S., & Khademhosseini, A. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.03.064 · Cited by 2,377
Self-citationHyaluronic Acid Hydrogels for Biomedical Applications
Burdick, J. A., & Prestwich, G. D. (2011) · Advanced Materials · doi:10.1002/adma.201003963 · Cited by 2,150
3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs
Kolesky, D. B., Truby, R. L., Gladman, A. S., Busbee, T. A., Homan, K. A., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201305506 · Cited by 2,102
Rapid casting of patterned vascular networks for perfusable engineered three-dimensional tissues
Miller, J. S., Stevens, K. R., Yang, M. T., Baker, B. M., Nguyen, D.-H. T., Cohen, D. M., Toro, E., Chen, A. A., Galie, P. A., Yu, X., et al. (2012) · Nature Materials · doi:10.1038/nmat3357 · Cited by 1,917
Research works printed but not linked: 1
- Kolesky, 2014, 3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs, Adv. Mater., 26, 3124, 10.1002/adma.201305506 · DOI · Paper page
Cited by
Sorted by citations
Items 301–400 of 919
Biofabrication Strategies and Engineered In Vitro Systems for Vascular Mechanobiology
Pradhan, S., Banda, O. A., Farino, C. J., Sperduto, J. L., Keller, K. A., Taitano, R. A., & Slater, J. H. (2020) · Advanced Healthcare Materials · doi:10.1002/adhm.201901255 · Cited by 63
Faithful scanning electron microscopic (SEM) visualization of 3D printed alginate-based scaffolds
Koch, M., & Włodarczyk‐Biegun, M. K. (2020) · Bioprinting · doi:10.1016/j.bprint.2020.e00098 · Cited by 60
Zhang, S., Cheng, Q., Zhang, W., Zhou, H., Wu, N., Yang, M. Y., Meng, S., Liu, Z., & Kong, T. (2022) · Advanced Materials · doi:10.1002/adma.202209263 · Cited by 59
Wang, J., Cui, Z., & Maniruzzaman, M. (2023) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2023.123020 · Cited by 66
Rutz, A. L., Lewis, P. L., & Shah, R. N. (2017) · MRS Bulletin · doi:10.1557/mrs.2017.162 · Cited by 60
Bioprinting and Cellular Therapies for Type 1 Diabetes
Ravnic, D. J., Leberfinger, A. N., & Ozbolat, I. T. (2017) · Trends in biotechnology · doi:10.1016/j.tibtech.2017.07.006 · Cited by 59
Stabilization strategies in extrusion-based 3D bioprinting for tissue engineering
Shapira, A., Noor, N., Asulin, M., & Dvir, T. (2018) · Applied Physics Reviews · doi:10.1063/1.5055659 · Cited by 62
Bioprinting a Synthetic Smectic Clay for Orthopedic Applications
Afewerki, S., Magalhães, L. S. S. M., Silva, A. D. R., Stocco, T. D., Silva-Filho, E. C., Marciano, F. R., & Lobo, A. O. (2019) · Advanced Healthcare Materials · doi:10.1002/adhm.201900158 · Cited by 61
Engineering in vitro vascular microsystems
Liu, Q., Ying, G., Hu, C., Du, L., Zhang, H., Wang, Z., Yue, H., Yetisen, A. K., Wang, G., Shen, Y., et al. (2025) · Microsystems & Nanoengineering · doi:10.1038/s41378-025-00956-w · Cited by 63
Advanced processing of 3D printed biocomposite materials using artificial intelligence
Verma, D., Dong, Y., Sharma, M., & Chaudhary, A. K. (2021) · Materials and Manufacturing Processes · doi:10.1080/10426914.2021.1945090 · Cited by 61
Ma, Z., He, H., Deng, C., Ya, R., Lu, D., Li, W., Sun, X., Wang, W., Zhang, Y., Xu, Y., et al. (2021) · Composites Part B Engineering · doi:10.1016/j.compositesb.2021.109399 · Cited by 59
Self-citationMuthusamy, S., Kannan, S., Lee, M., Vijayavenkataraman, S., Lu, W. F., Fuh, J. Y. H., Sriram, G., & Cao, T. (2021) · Biotechnology and Bioengineering · doi:10.1002/bit.27838 · Cited by 61
Rothbauer, M., Eilenberger, C., Spitz, S., Bachmann, B., Kratz, S. R. A., Reihs, E. I., Windhager, R. H., Toegel, S., & Ertl, P. (2022) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2022.837087 · Cited by 61
3D Bioprinting for Vascularization
Mir, A., Lee, E., Shih, W., Koljaka, S., Wang, A., Jorgensen, C., Hurr, R., Dave, A., Sudheendra, K., & Hibino, N. (2023) · Bioengineering · doi:10.3390/bioengineering10050606 · Cited by 61
Progress in Organ Bioprinting for Regenerative Medicine
Wang, X. S., Zhang, D., Singh, Y. P., Yeo, M., Deng, G., Lai, J., Chen, F., Ozbolat, I. T., & Yu, Y. (2024) · Engineering · doi:10.1016/j.eng.2024.04.023 · Cited by 61
Water-in-PDMS Emulsion Templating of Highly Interconnected Porous Architectures for 3D Cell Culture
Riesco, R., Boyer, L., Blosse, S., Lefebvre, P. M., Assémat, P., Leïchlé, T., Accardo, A., & Malaquin, L. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b07564 · Cited by 58
Miramini, S., Fegan, K. L., Green, N. C., Espino, D. M., Zhang, L., & Thomas-Seale, L. E. J. (2019) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2019.103544 · Cited by 59
Progress of 3D Bioprinting in Organ Manufacturing
Song, D., Xu, Y., Liu, S., Wen, L., & Wang, X. (2021) · Polymers · doi:10.3390/polym13183178 · Cited by 60
Rutz, A. L., Gargus, E. S., Hyland, K. E., Lewis, P. L., Aakash, S., Burghardt, W. R., & Shah, R. N. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.09.007 · Cited by 60
3D Cell Printing of Tissue/Organ-Mimicking Constructs for Therapeutic and Drug Testing Applications
Kim, J., Kong, J. S., Han, W., Kim, B. S., & Cho, D. (2020) · International Journal of Molecular Sciences · doi:10.3390/ijms21207757 · Cited by 54
Influence of Cross-Linking Conditions on Drying Kinetics of Alginate Hydrogel
Łabowska, M. B., Skrodzka, M., Sicińska, H., Michalak, I., & Detyna, J. D. (2023) · Gels · doi:10.3390/gels9010063 · Cited by 60
Screening Cancer Immunotherapy: When Engineering Approaches Meet Artificial Intelligence
Zhou, X., Qu, M., Tebon, P. J., Jiang, X., Wang, C., Xue, Y., Zhu, J., Zhang, S., Öklü, R., Sengupta, S., et al. (2020) · Advanced Science · doi:10.1002/advs.202001447 · Cited by 55
Self-citationRandhawa, A., Dutta, S. D., Ganguly, K., Patel, D. K., Patil, T. V., & Lim, K. (2022) · Macromolecular Bioscience · doi:10.1002/mabi.202200278 · Cited by 55
Bottom-up biofabrication using microfluidic techniques
Nie, M., & Takeuchi, S. (2018) · Biofabrication · doi:10.1088/1758-5090/aadef9 · Cited by 55
Trends in 3D bioprinting for esophageal tissue repair and reconstruction
Farhat, W., Chatelain, F., Marret, A., Faivre, L., Arakélian, L., Cattan, P., & Fuchs, A. (2020) · Biomaterials · doi:10.1016/j.biomaterials.2020.120465 · Cited by 54
Kim, J. J., & Cho, D. (2024) · Virtual and Physical Prototyping · doi:10.1080/17452759.2024.2395470 · Cited by 57
Wang, Z., Jin, X., Tian, Z., Ménard, F., Holzman, J. F., & Kim, K. (2018) · Advanced Healthcare Materials · doi:10.1002/adhm.201701249 · Cited by 55
Decellularized extracellular matrix bioinks and their application in skin tissue engineering
Khoshnood, N., & Zamanian, A. (2020) · Bioprinting · doi:10.1016/j.bprint.2020.e00095 · Cited by 54
Nguyen‐Truong, M., Li, Y. V., & Wang, Z. (2020) · Bioengineering · doi:10.3390/bioengineering7040122 · Cited by 57
Martinez-Garcia, F. D., de Hilster, R. H. J., Sharma, P. K., Borghuis, T., Hylkema, M. N., Burgess, J. K., & Harmsen, M. C. (2021) · Polymers · doi:10.3390/polym13183113 · Cited by 53
Kim, D., Kim, M., Lee, J., & Jang, J. (2022) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2022.764682 · Cited by 53
Xu, C. W., Kang, Y., Guan, S., Dong, X., Jiang, D., & Qi, M. (2022) · Chinese Chemical Letters · doi:10.1016/j.cclet.2022.107825 · Cited by 52
Gelatin and Bioactive Glass Composites for Tissue Engineering: A Review
Barreto, M. E. V., Medeiros, R. P., Shearer, A., Fook, M. V. L., Montazerian, M., & Mauro, J. C. (2022) · Journal of Functional Biomaterials · doi:10.3390/jfb14010023 · Cited by 52
Lu, B., Ye, M., Xia, J., Zhang, Z., Xiong, Z., & Zhang, T. (2023) · Advanced Healthcare Materials · doi:10.1002/adhm.202300607 · Cited by 52
3D bioprinting applications for the printing of skin: A brief study
Javaid, M., & Haleem, A. (2021) · Sensors International · doi:10.1016/j.sintl.2021.100123 · Cited by 52
Liu, H., Zhou, H., Lan, H., Liu, T., Liu, X., & Yu, H. (2017) · Micromachines · doi:10.3390/mi8080237 · Cited by 51
Vrana, N. E., Gupta, S., Mitra, K., Rizvanov, A. A., Solovyeva, V. V., Antmen, E., Salehi, M., Ehterami, A., Pourchet, L., Barthès, J., et al. (2022) · Cell and Tissue Banking · doi:10.1007/s10561-021-09975-z · Cited by 56
Wang, B., Zhang, N., Feng, W., Chen, S., Zhu, X., Shan, X., Yuan, R., Yuan, B., Wang, H., Zhou, G., et al. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202407934 · Cited by 52
Three-Dimensional Cell Printing of Large-Volume Tissues: Application to Ear Regeneration
Lee, J., Kim, B. S., Seo, D., Park, J., & Cho, D. (2017) · Tissue Engineering Part C Methods · doi:10.1089/ten.tec.2016.0362 · Cited by 51
Bioinks for 3D Bioprinting: A Scientometric Analysis of Two Decades of Progress
Pedroza-González, S. C., Rodríguez-Salvador, M., Pérez-Benítez, B. E., Álvarez, M. M., & Santiago, G. T. (2021) · International Journal of Bioprinting · doi:10.18063/ijb.v7i2.337 · Cited by 51
In vivo remodeling of a 3D-Bioprinted tissue engineered heart valve scaffold
Maxson, E. L., Young, M. D., Noble, C., Go, J. L., Heidari, B., Khorramirouz, R., Morse, D. W., & Lerman, A. (2019) · Bioprinting · doi:10.1016/j.bprint.2019.e00059 · Cited by 50
3D bioprinting of cardiac tissue: current challenges and perspectives
Kato, B., Wisser, G., Agrawal, D. K., Wood, T. J., & Thankam, F. G. (2021) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-021-06520-y · Cited by 50
Polysaccharide‐based biomaterials in a journey from 3D to 4D printing
Shokrani, H., Shokrani, A., Seidi, F., Mashayekhi, M., Kar, S., Nedeljković, D., Kuang, T., Saeb, M. R., & Mozafari, M. (2023) · Bioengineering & Translational Medicine · doi:10.1002/btm2.10503 · Cited by 52
Three-dimensional bioprinting of volumetric tissues and organs
Kilian, D., Ahlfeld, T., Akkineni, A. R., Lode, A., & Gelinsky, M. (2017) · MRS Bulletin · doi:10.1557/mrs.2017.164 · Cited by 50
Sun, T., Shi, Q., Huang, Q., Wang, H., Xiong, X., Hu, C., & Fukuda, T. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.11.038 · Cited by 50
Bioprinted microvasculature: progressing from structure to function
Seymour, A. J., Westerfield, A. D., Cornelius, V., Skylar‐Scott, M. A., & Heilshorn, S. C. (2022) · Biofabrication · doi:10.1088/1758-5090/ac4fb5 · Cited by 56
Wen, J., Hou, B., Lin, W., Guo, F., Cheng, M., Zheng, J., He, P., & Ji, W. (2022) · Biomaterials Science · doi:10.1039/d2bm00109h · Cited by 49
4D Biofabrication of T‐Shaped Vascular Bifurcation
Kitana, W., Apsite, I., Hazur, J., Boccaccini, A. R., & Ionov, L. (2022) · Advanced Materials Technologies · doi:10.1002/admt.202200429 · Cited by 49
Mitigating challenges and expanding the future of vascular tissue engineering—are we there yet?
Shakeel, A., & Corridon, P. R. (2023) · Frontiers in Physiology · doi:10.3389/fphys.2022.1079421 · Cited by 49
Controlled tumor heterogeneity in a co-culture system by 3D bio-printed tumor-on-chip model
Moghimi, N., Hosseini, S. A., Dalan, A. B., Mohammadrezaei, D., Goldman, A. J., & Kohandel, M. (2023) · Scientific Reports · doi:10.1038/s41598-023-40680-x · Cited by 54
Engineering the 3D structure of organoids
Moss, S. P., Bakırcı, E., & Feinberg, A. W. (2024) · Stem Cell Reports · doi:10.1016/j.stemcr.2024.11.009 · Cited by 52
Current Progress in 3D Bioprinting of Tissue Analogs
Zhang, S., & Wang, H. (2018) · SLAS TECHNOLOGY · doi:10.1177/2472630318799971 · Cited by 50
Gu, Y., Zhang, L., Du, X., Fan, Z., Wang, L., Sun, W., Cheng, Y., Zhu, Y., & Chen, C. (2018) · Journal of Biomaterials Applications · doi:10.1177/0885328218805864 · Cited by 53
Development and characterization of a low-cost 3D bioprinter
Yenilmez, B., Temirel, M., Knowlton, S. M., Lepowsky, E., & Taşoğlu, S. (2019) · Bioprinting · doi:10.1016/j.bprint.2019.e00044 · Cited by 49
Microvascular Tissue Engineering—A Review
Vajda, J., Milojević, M., Maver, U., & Vihar, B. (2021) · Biomedicines · doi:10.3390/biomedicines9060589 · Cited by 52
Hydrogel-Based Scaffolds in Oral Tissue Engineering
Ayala-Ham, A. D. R., López-Gutiérrez, J., Bermúdez, M., Aguilar‐Medina, M., Sarmiento‐Sánchez, J. I., López‐Camarillo, C., Sánchez‐Schmitz, G., & Ramos‐Payán, R. (2021) · Frontiers in Materials · doi:10.3389/fmats.2021.708945 · Cited by 48
Bioprinting Scaffolds for Vascular Tissues and Tissue Vascularization
Hauser, P. V., Chang, H.-M., Nishikawa, M., Kimura, H., Yanagawa, N., & Hamon, M. (2021) · Bioengineering · doi:10.3390/bioengineering8110178 · Cited by 50
Microfluidic technologies for vasculature biomimicry
Hu, C., Chen, Y., Tan, M. J. A., Ren, K., & Wu, H. (2019) · The Analyst · doi:10.1039/c9an00421a · Cited by 50
Krishna, D. V., & Sankar, M. R. (2023) · Engineered Regeneration · doi:10.1016/j.engreg.2023.07.002 · Cited by 49
In Situ Bioprinting: Process, Bioinks, and Applications
Jain, P., Kathuria, H., Ramakrishna, S., Parab, S., Pandey, M. M., & Dubey, N. (2024) · ACS Applied Bio Materials · doi:10.1021/acsabm.3c01303 · Cited by 53
The promising rise of bioprinting in revolutionalizing medical science: Advances and possibilities
Jamee, R., Araf, Y., Naser, I. B., & Promon, S. K. (2021) · Regenerative Therapy · doi:10.1016/j.reth.2021.05.006 · Cited by 46
Reconstructing the tumor architecture into organoids
Luo, Z., Zhou, X., Mandal, K., He, N., Wennerberg, W., Qu, M., Jiang, X., Sun, W., & Khademhosseini, A. (2021) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2021.113839 · Cited by 49
Self-citationWang, J., Wang, H., Wang, Y., Liu, Z., Li, Z., Li, J., Chen, Q., Meng, Q., Shu, W., Wu, J., et al. (2022) · Acta Biomaterialia · doi:10.1016/j.actbio.2022.01.055 · Cited by 48
Wang, Z., Huang, C., Xu, H., Li, S., Wang, Z., Huang, J. S., Liu, H., & Chen, Z. (2022) · Materials & Design · doi:10.1016/j.matdes.2022.110662 · Cited by 48
Tunable and Compartmentalized Multimaterial Bioprinting for Complex Living Tissue Constructs
Hassan, S., Gomez-Reyes, E., Enciso‐Martínez, E., Shi, K., Campos, J. G., Soria, O. Y. P., Ceron, E. L., Lee, M. C., García-Reyes, I. E., Steakelum, J., et al. (2022) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.2c12585 · Cited by 46
Self-citationXing, F., Xu, J., Yu, P., Zhou, Y., Zhe, M., Luo, R., Liu, M., Xiang, Z., Duan, X., & Ritz, U. (2023) · Materials & Design · doi:10.1016/j.matdes.2023.111885 · Cited by 46
Designing future foods: Harnessing 3D food printing technology to encapsulate bioactive compounds
Ahmadzadeh, S., Lenie, M. D. R., Mirmahdi, R. S., & Ubeyitogullari, A. (2023) · Critical Reviews in Food Science and Nutrition · doi:10.1080/10408398.2023.2273446 · Cited by 46
Universal Nanocarrier Ink Platform for Biomaterials Additive Manufacturing
Guzzi, E. A., Bovone, G., & Tibbitt, M. W. (2019) · Small · doi:10.1002/smll.201905421 · Cited by 45
3D biofabrication for soft tissue and cartilage engineering
Turnbull, G. S., Clarke, J., Picard, F., Zhang, W., Riches, P. E., Li, B., & Shu, W. (2020) · Medical Engineering & Physics · doi:10.1016/j.medengphy.2020.06.003 · Cited by 48
3D Bioprinting of Cultured Meat: A Promising Avenue of Meat Production
Guo, X., Wang, D., He, B., Hu, L., & Jiang, G. (2023) · Food and Bioprocess Technology · doi:10.1007/s11947-023-03195-x · Cited by 49
Heterogeneous and Composite Bioinks for 3D-Bioprinting of Complex Tissue
Rasouli, R., Sweeney, C. L., & Frampton, J. P. (2024) · Biomedical Materials & Devices · doi:10.1007/s44174-024-00171-7 · Cited by 54
Wang, Y., Huang, X., Shen, Y., Hang, R., Zhang, X., Wang, Y., Yao, X., & Tang, B. H. (2019) · Journal of Materials Science · doi:10.1007/s10853-019-03447-2 · Cited by 47
Current research trends and challenges in tissue engineering for mending broken hearts
Qasim, M., Palaniappan, A., Powell, H. M., & Khan, M. (2019) · Life Sciences · doi:10.1016/j.lfs.2019.05.012 · Cited by 46
Ko, Y., & Kwon, O. H. (2020) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2020.04.021 · Cited by 46
Evaluation of silk‐based bioink during pre and post 3D bioprinting: A review
Gupta, S., Alrabaiah, H., Marquette, C. A., Rahimi‐Gorji, M., Nadeem, S., & Bit, A. (2020) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.34699 · Cited by 45
Review of Bioprinting in Regenerative Medicine: Naturally Derived Bioinks and Stem Cells
Moghaddam, A. S., Khonakdar, H. A., Arjmand, M., Jafari, S. H., Bagher, Z., Moghaddam, Z. S., Chimerad, M., Sisakht, M. M., & Shojaei, S. (2021) · ACS Applied Bio Materials · doi:10.1021/acsabm.1c00219 · Cited by 48
Advances in tissue engineering of vasculature through three‐dimensional bioprinting
Zhu, J., Wang, Y., Zhong, L., Pan, F., & Wang, J. (2021) · Developmental Dynamics · doi:10.1002/dvdy.385 · Cited by 45
Sousa, C. F. V., Saraiva, C. A. M., Correia, T. R., Pesqueira, T., Patrício, S. G., Rial-Hermida, M. I., Borges, J., & Mano, J. F. (2021) · Biomolecules · doi:10.3390/biom11060863 · Cited by 46
A 3D‐Bioprinted Multiple Myeloma Model
Wu, D., Wang, Z., Li, J., Song, Y. Y., Pérez, M. E. M., Wang, Z., Cao, X., Cao, C., Maharjan, S., Anderson, K. C., et al. (2021) · Advanced Healthcare Materials · doi:10.1002/adhm.202100884 · Cited by 47
Self-citationRecent advances in organoid engineering: A comprehensive review
Unagolla, J. M., & Jayasuriya, A. C. (2022) · Applied Materials Today · doi:10.1016/j.apmt.2022.101582 · Cited by 44
Alginate-based bio-nanohybrids with unique properties for biomedical applications
Qamar, S., Karim, S., Aslam, S., Jahangeer, M., Nelofer, R., Nadeem, A. A., Qamar, S. A., Jesionowski, T., & Bilal, M. (2024) · Starch - Stärke · doi:10.1002/star.202200100 · Cited by 46
Three-dimensional bioprinting of artificial blood vessel: Process, bioinks, and challenges
Hou, Y., Cui, X., Qin, Z., Su, C., Zhang, G., Tang, J., Li, J., & Zhang, J. (2023) · International Journal of Bioprinting · doi:10.18063/ijb.740 · Cited by 47
Sun, H., Sun, L., Ke, X., Liu, L., Li, C., Jin, B., Wang, P., Jiang, Z., Zhao, H., Yang, Z., et al. (2023) · Advanced Science · doi:10.1002/advs.202304460 · Cited by 47
Microfluidic Bioprinting for Engineering Vascularized Tissues and Organoids
Zhang, Y. S., Pi, Q., & van Genderen, A. M. (2017) · Journal of Visualized Experiments · doi:10.3791/55957 · Cited by 46
Self-citationMora‐Boza, A., Włodarczyk‐Biegun, M. K., del Campo, A., Vázquez‐Lasa, B., & Román, J. S. (2019) · Biomaterials Science · doi:10.1039/c9bm01271k · Cited by 44
History and Trends of 3D Bioprinting
Thayer, P., Martinez, H., & Gatenholm, E. (2020) · Methods in molecular biology · doi:10.1007/978-1-0716-0520-2_1 · Cited by 46
Biomimetic Peridontium Patches for Functional Periodontal Regeneration
Ma, Y., Yang, X., Chen, Y., Zhang, J., Gai, K., Chen, J., Huo, F., Guo, Q., Guo, W., Gou, M., et al. (2022) · Advanced Healthcare Materials · doi:10.1002/adhm.202202169 · Cited by 43
Adhikari, J., Roy, A., Chanda, A., Gouripriya, D. A., Thomas, S., Ghosh, M., Kim, J., & Saha, P. (2022) · Biomaterials Science · doi:10.1039/d2bm01499h · Cited by 43
Fabrication of Hydrogel Materials for Biomedical Applications
Yang, J., Olanrele, O. S., Zhang, X., & Hsu, C. C. (2018) · Advances in experimental medicine and biology · doi:10.1007/978-981-13-0947-2_12 · Cited by 45
Could 3D printing be the future for oral soft tissue regeneration?
Nešić, D., Durual, S., Marger, L., Mekki, M., Sailer, I., & Scherrer, S. S. (2020) · Bioprinting · doi:10.1016/j.bprint.2020.e00100 · Cited by 43
Liu, T., Li, B., Chen, G., Ye, X., & Zhang, Y. (2022) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2022.09.003 · Cited by 42
Self-citationWang, X., Chan, V., & Corridon, P. R. (2022) · Polymers · doi:10.3390/polym14224825 · Cited by 43
Bioprintable Alginate/Gelatin Hydrogel 3D In Vitro Model Systems Induce Cell Spheroid Formation
Jiang, T., Munguia-López, J. G., Flores-Torres, S., Grant, J., Vijayakumar, S., León‐Rodríguez, A. D., & Kinsella, J. M. (2018) · Journal of Visualized Experiments · doi:10.3791/57826 · Cited by 43
Biomimetic cardiovascular platforms for in vitro disease modeling and therapeutic validation
Lara, R. P., Spencer, A. R., Walker, B. W., Sani, E. S., & Annabi, N. (2018) · Biomaterials · doi:10.1016/j.biomaterials.2018.08.010 · Cited by 43
Zhou, Y. X., Yue, Z., Chen, Z. X., & Wallace, G. G. (2020) · Advanced Healthcare Materials · doi:10.1002/adhm.202001342 · Cited by 42
Lightweight 3D bioprinting with point by point photocuring
Zhang, P., Wang, H., Wang, P., Zheng, Y., Liu, L., Hu, J. P., Liu, Y., Gao, Q., & He, Y. (2020) · Bioactive Materials · doi:10.1016/j.bioactmat.2020.10.023 · Cited by 42
Bolívar‐Monsalve, E. J., Ceballos‐González, C. F., Chávez-Madero, C., de la Cruz‐Rivas, B. G., Velásquez‐Marín, S., Mora‐Godínez, S., Reyes‐Cortés, L. M., Khademhosseini, A., Weiss, P. S., Samandari, M., et al. (2022) · Advanced Healthcare Materials · doi:10.1002/adhm.202200448 · Cited by 41
Self-citationHao, L., Zhao, S., Hao, S., He, Y., Feng, M., Zhou, K., He, Y., Yang, J., Mao, H., & Gu, Z. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.124364 · Cited by 44
Modeling angiogenesis with micro- and nanotechnology
Chen, L.-J., & Kaji, H. (2017) · Lab on a Chip · doi:10.1039/c7lc00774d · Cited by 44
Current Challenges of Bioprinted Tissues Toward Clinical Translation
Ke, D., & Murphy, S. V. (2018) · Tissue Engineering Part B Reviews · doi:10.1089/ten.teb.2018.0132 · Cited by 44
Metadata
- Authors
- Jia, W., Gungor-Ozkerim, P. S., Zhang, Y. S., Yue, K., Zhu, K., Liu, W., Pi, Q., Byambaa, B., Dokmeci, M. R., Shin, S. R., & Khademhosseini, A.
- Affiliations
- Brigham and Women's Hospital (US)
- Corresponding author
- Zhang, Yu Shrike
- Shin, Su Ryon
- Khademhosseini, Ali
- ORCID
- Venue
- Biomaterials
- Publisher
- Elsevier BV
- Published
- 2016-11
- Volume
- 106
- Pages
- 58-68
- ISSN
- 0142-9612 (ISSN-L)
- PMC
- PMC5300870
- OpenAlex
- W2502401296
- Cited by
- 922
- References
- 67
- Citations by year
- 2026: 37 · 2025: 59 · 2024: 86 · 2023: 97 · 2022: 113 · 2021: 132 · 2020: 121 · 2019: 110 · 2018: 94 · 2017: 68 · 2016: 4
- FWCI
- 44.28
- Type
- journal article
- Language
- en
- Update notices
- erratum (2025-11-01)
- Open access
- bronze
- doi.org
- Licence
- Locations
- Biomaterials (acceptedVersion)
- PubMed (publishedVersion)
- PubMed Central (acceptedVersion)
- Funders
- National Cancer Institute (1K99CA201603-01A1)
- National Institutes of Health (HL099073, EB02597, AR057837, HL092836)
- Natural Sciences and Engineering Research Council of Canada
- National Science Foundation (DMR0847287)
- Türkiye Bilimsel ve Teknolojik Araştırma Kurumu (B.14.2.TBT.0.06.01-219-115543)
- Office of Naval Research
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Health Sciences › Medicine › Surgery › Tissue Engineering and Regenerative Medicine
- Keywords
- 3D bioprinting, perfusable vascular networks, gelatin methacryloyl, sodium alginate, coaxial extrusion, calcium crosslinking, photocrosslinking, endothelial cells, stem cells, vascularized tissue engineering, mechanical strength
- MeSH terms
- Blood Vessels, Cells, Cultured, Equipment Design, Humans, Ink, Organ Culture Techniques, Perfusion, Neovascularization, Physiologic, Bioreactors, Bioartificial Organs, Tissue Engineering, Endothelial Cells, Tissue Scaffolds, Batch Cell Culture Techniques, Printing, Three-Dimensional
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
