The DOI matches its Crossref record; 142 of the 142 references it cites were found in a registry or an index.
Geometrical metrology for metal additive manufacturing
Open accessAbstract
The needs, requirements, and on-going and future research issues in geometrical metrology for metal additive manufacturing are addressed. The infrastructure under development for specification standards in AM is presented, and the research on geometrical dimensioning and tolerancing for AM is reviewed. Post-process metrology is covered, including the measurement of surface form, texture and internal features. In-process requirements and developments in AM are discussed along with the materials metrology that is pertinent to geometrical measurement. Issues of traceability, including benchmarking artefacts, are presented. The information in the review sections is summarized in a synthesis of current requirements and future research topics.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Metal Additive Manufacturing: A Review
Frazier, W. E. (2014) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-014-0958-z · Cited by 5,984
Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing
Gibson, I., Rosen, D. W., & Stucker, B. (2010) · National University of Singapore · doi:10.1007/978-1-4419-1120-9 · Cited by 2,969
A study of the microstructural evolution during selective laser melting of Ti–6Al–4V
Thijs, L., Verhaeghe, F., Craeghs, T., Humbeeck, J. V., & Kruth, J.-P. (2010) · Acta Materialia · doi:10.1016/j.actamat.2010.02.004 · Cited by 2,929
Khairallah, S. A., Anderson, A. T., Rubenchik, A., & King, W. E. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.02.014 · Cited by 2,766
Design for Additive Manufacturing: Trends, opportunities, considerations, and constraints
Thompson, M. K., Moroni, G., Vaneker, T., Fadel, G., Campbell, R. I., Gibson, I., Bernard, A., Schulz, J., Graf, P., Ahuja, B., et al. (2016) · CIRP Annals · doi:10.1016/j.cirp.2016.05.004 · Cited by 2,017
Residual stresses in selective laser sintering and selective laser melting
Mercelis, P., & Kruth, J. (2006) · Rapid Prototyping Journal · doi:10.1108/13552540610707013 · Cited by 2,015
(2017) · A Counselor's Guide to the Dissertation Process Where to Start & How to Finish · doi:10.1002/9781119375500.ch1 · Cited by 1,785
Metal Additive Manufacturing: A Review of Mechanical Properties
Lewandowski, J. J., & Seifi, M. (2016) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070115-032024 · Cited by 1,722
Selective laser melting of iron-based powder
Kruth, J. P., Froyen, L., Van Vaerenbergh, J., Mercelis, P., Rombouts, M., & Lauwers, B. (2004) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2003.11.051 · Cited by 1,550
Leuders, S., Thöne, M., Riemer, A., Niendorf, T., Tröster, T., Richard, H. A., & Maier, H. J. (2013) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2012.11.011 · Cited by 1,475
Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing
Everton, S. K., Hirsch, M., Stravroulakis, P., Leach, R. K., & Clare, A. T. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.01.099 · Cited by 1,469
Self-citationProgress in Additive Manufacturing and Rapid Prototyping
Kruth, J.-P., Leu, M. C., & Nakagawa, T. (1998) · CIRP Annals · doi:10.1016/s0007-8506(07)63240-5 · Cited by 1,331
Levy, G. N., Schindel, R., & Kruth, J. P. (2003) · CIRP Annals · doi:10.1016/s0007-8506(07)60206-6 · Cited by 1,121
Additive manufacturing of metallic components by selective electron beam melting — a review
Körner, C. (2016) · International Materials Reviews · doi:10.1080/09506608.2016.1176289 · Cited by 1,106
Materials for additive manufacturing
Bourell, D., Kruth, J. P., Leu, M., Levy, G., Rosen, D., Beese, A. M., & Clare, A. (2017) · CIRP Annals · doi:10.1016/j.cirp.2017.05.009 · Cited by 1,034
Self-citationMaterial issues in additive manufacturing: A review
Singh, S., Ramakrishna, S., & Singh, R. (2017) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2016.11.006 · Cited by 899
Surface roughness analysis, modelling and prediction in selective laser melting
Strano, G., Hao, L., Everson, R. M., & Evans, K. E. (2013) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2012.11.011 · Cited by 876
Process defects and in situ monitoring methods in metal powder bed fusion: a review
Grasso, M., & Colosimo, B. M. (2017) · Measurement Science and Technology · doi:10.1088/1361-6501/aa5c4f · Cited by 833
Single track formation in selective laser melting of metal powders
Yadroitsev, I., Gusarov, A., Yadroitsava, I., & Smurov, I. (2010) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2010.05.010 · Cited by 827
In situ X-ray imaging of defect and molten pool dynamics in laser additive manufacturing
Leung, C. L. A., Marussi, S., Atwood, R. C., Towrie, M., Withers, P. J., & Lee, P. D. (2018) · Nature Communications · doi:10.1038/s41467-018-03734-7 · Cited by 817
Denudation of metal powder layers in laser powder bed fusion processes
Matthews, M. J., Guss, G., Khairallah, S. A., Rubenchik, A. M., Depond, P. J., & King, W. E. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.05.017 · Cited by 809
Turner, B. N., & Gold, S. A. (2015) · Rapid Prototyping Journal · doi:10.1108/rpj-02-2013-0017 · Cited by 770
Zhao, C., Fezzaa, K., Cunningham, R. W., Wen, H., De Carlo, F., Chen, L., Rollett, A. D., & Sun, T. (2017) · Scientific Reports · doi:10.1038/s41598-017-03761-2 · Cited by 758
Surface texture metrology for metal additive manufacturing: a review
Townsend, A., Senin, N., Blunt, L., Leach, R. K., & Taylor, J. S. (2016) · Precision Engineering · doi:10.1016/j.precisioneng.2016.06.001 · Cited by 743
Self-citationComputed tomography for dimensional metrology
Kruth, J. P., Bartscher, M., Carmignato, S., Schmitt, R., De Chiffre, L., & Weckenmann, A. (2011) · CIRP Annals · doi:10.1016/j.cirp.2011.05.006 · Cited by 684
Self-citationDing, L., & Goshtasby, A. (2001) · Pattern Recognition · doi:10.1016/s0031-3203(00)00023-6 · Cited by 683
Industrial applications of computed tomography
De Chiffre, L., Carmignato, S., Kruth, J.-P., Schmitt, R., & Weckenmann, A. (2014) · CIRP Annals · doi:10.1016/j.cirp.2014.05.011 · Cited by 670
Self-citationInvestigations on residual stresses and deformations in selective laser melting
Zaeh, M. F., & Branner, G. (2010) · Production Engineering · doi:10.1007/s11740-009-0192-y · Cited by 666
Optical Measurement of Surface Topography
(2011) · Springer eBooks · doi:10.1007/978-3-642-12012-1 · Cited by 661
Material Incress Manufacturing by Rapid Prototyping Techniques
Kruth, J. P. (1991) · CIRP Annals · doi:10.1016/s0007-8506(07)61136-6 · Cited by 657
Overview of Materials Qualification Needs for Metal Additive Manufacturing
Seifi, M., Salem, A., Beuth, J., Harrysson, O., & Lewandowski, J. J. (2016) · JOM · doi:10.1007/s11837-015-1810-0 · Cited by 630
Iassonov, P., Gebrenegus, T., & Tuller, M. (2009) · Water Resources Research · doi:10.1029/2009wr008087 · Cited by 628
Comparison of density measurement techniques for additive manufactured metallic parts
Spierings, A. B., Schneider, M., & Eggenberger, R. (2011) · Rapid Prototyping Journal · doi:10.1108/13552541111156504 · Cited by 613
Laser based additive manufacturing in industry and academia
Schmidt, M., Merklein, M., Bourell, D., Dimitrov, D., Hausotte, T., Wegener, K., Overmeyer, L., Vollertsen, F., & Levy, G. N. (2017) · CIRP Annals · doi:10.1016/j.cirp.2017.05.011 · Cited by 602
Self-citationResidual Stress within Metallic Model Made by Selective Laser Melting Process
Shiomi, M., Osakada, K., Nakamura, K., Yamashita, T., & Abe, F. (2004) · CIRP Annals · doi:10.1016/s0007-8506(07)60677-5 · Cited by 591
du Plessis, A., Yadroitsev, I., Yadroitsava, I., & Le Roux, S. G. (2018) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2018.0060 · Cited by 550
Kruth, J.-P., Deckers, J., Yasa, E., & Wauthlé, R. (2012) · Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture · doi:10.1177/0954405412437085 · Cited by 532
X-ray computed tomography for additive manufacturing: a review
Thompson, A., Maskery, I., & Leach, R. K. (2016) · Measurement Science and Technology · doi:10.1088/0957-0233/27/7/072001 · Cited by 521
Self-citationLy, S., Rubenchik, A. M., Khairallah, S. A., Guss, G. M., & Matthews, M. J. (2017) · Scientific Reports · doi:10.1038/s41598-017-04237-z · Cited by 521
Romano, S., Brückner-Foit, A., Brandão, A., Gumpinger, J., Ghidini, T., & Beretta, S. (2018) · Engineering Fracture Mechanics · doi:10.1016/j.engfracmech.2017.11.002 · Cited by 521
Trapp, J., Rubenchik, A. M., Guss, G., & Matthews, M. J. (2017) · Applied Materials Today · doi:10.1016/j.apmt.2017.08.006 · Cited by 509
Characterization of Metal Powders Used for Additive Manufacturing
Slotwinski, J. A., Garboczi, E. J., Stutzman, P. E., Ferraris, C. F., Watson, S. S., & Peltz, M. A. (2014) · Journal of Research of the National Institute of Standards and Technology · doi:10.6028/jres.119.018 · Cited by 506
Modeling of additive manufacturing processes for metals: Challenges and opportunities
Francois, M. M., Sun, A., King, W. E., Henson, N. J., Tourret, D., Bronkhorst, C. A., Carlson, N. N., Newman, C. K., Haut, T., Bakosi, J., et al. (2017) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2016.12.001 · Cited by 462
On-machine and in-process surface metrology for precision manufacturing
Gao, W., Haitjema, H., Fang, F., Leach, R., Cheung, C. F., Savio, E., & Linares, J. (2019) · CIRP Annals · doi:10.1016/j.cirp.2019.05.005 · Cited by 457
Self-citationGobert, C., Reutzel, E. W., Petrich, J., Nassar, A. R., & Phoha, S. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.04.005 · Cited by 447
Solid Freeform Fabrication: A New Direction in Manufacturing
Beaman, J. J., Barlow, J. W., Bourell, D. L., Crawford, R. H., Marcus, H. L., & McAlea, K. P. (1997) · Springer eBooks · doi:10.1007/978-1-4615-6327-3 · Cited by 438
Self-citationMetrology of freeform shaped parts
Savio, E., Chiffre, L. D., & Schmitt, R. H. (2007) · CIRP Annals · doi:10.1016/j.cirp.2007.10.008 · Cited by 412
Porosity Measurements and Analysis for Metal Additive Manufacturing Process Control
Slotwinski, J. A., Garboczi, E. J., & Hebenstreit, K. M. (2014) · Journal of Research of the National Institute of Standards and Technology · doi:10.6028/jres.119.019 · Cited by 408
Buchbinder, D., Meiners, W., Pirch, N., Wissenbach, K., & Schrage, J. (2014) · Journal of Laser Applications · doi:10.2351/1.4828755 · Cited by 390
Effect of surface roughness on fatigue performance of additive manufactured Ti–6Al–4V
Greitemeier, D., Donne, C. D., Syassen, F., Eufinger, J., & Melz, T. (2015) · Materials Science and Technology · doi:10.1179/1743284715y.0000000053 · Cited by 379
Additive manufacturing-enabled design theory and methodology: a critical review
Yang, S., & Zhao, Y. F. (2015) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-015-6994-5 · Cited by 371
Perspectives on Additive Manufacturing
Bourell, D. L. (2016) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070115-031606 · Cited by 362
Self-citationKoutiri, I., Pessard, E., Peyre, P., Amlou, O., & De Terris, T. (2018) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2017.12.043 · Cited by 352
Topology Optimization for Additive Manufacturing
Brackett, D., Ashcroft, I., & Hague, R. (2011) · doi:10.26153/tsw/15300 · Cited by 347
Simonelli, M., Tuck, C., Aboulkhair, N. T., Maskery, I., Ashcroft, I., Wildman, R. D., & Hague, R. (2015) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-015-2882-8 · Cited by 342
Yadroitsev, I., & Smurov, I. (2010) · Physics Procedia · doi:10.1016/j.phpro.2010.08.083 · Cited by 339
Porosity prediction: Supervised-learning of thermal history for direct laser deposition
Khanzadeh, M., Chowdhury, S., Marufuzzaman, M., Tschopp, M. A., & Bian, L. (2018) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2018.04.001 · Cited by 338
Aboulkhair, N. T., Maskery, I., Tuck, C., Ashcroft, I., & Everitt, N. M. (2016) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2015.11.016 · Cited by 329
Understanding thermal behavior in the LENS process
Griffith, M. L., Schlienger, M. E., Harwell, L. D., Oliver, M. S., Baldwin, M. D., Ensz, M. T., Essien, M., Brooks, J., Robino, C. V., Smugeresky, J. E., et al. (1999) · Materials & Design · doi:10.1016/s0261-3069(99)00016-3 · Cited by 327
Fundamental consolidation mechanisms during selective beam melting of powders
Körner, C., Bauereiß, A., & Attar, E. (2013) · Modelling and Simulation in Materials Science and Engineering · doi:10.1088/0965-0393/21/8/085011 · Cited by 323
Scime, L., & Beuth, J. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.09.034 · Cited by 322
Maskery, I., Aboulkhair, N. T., Corfield, M. R., Tuck, C., Clare, A. T., Leach, R. K., Wildman, R. D., Ashcroft, I. A., & Hague, R. J. M. (2016) · Materials Characterization · doi:10.1016/j.matchar.2015.12.001 · Cited by 317
Self-citationSurface Modification of Ti6Al4V Open Porous Structures Produced by Additive Manufacturing
Pyka, G., Burakowski, A., Kerckhofs, G., Moesen, M., Van Bael, S., Schrooten, J., & Wevers, M. (2012) · Advanced Engineering Materials · doi:10.1002/adem.201100344 · Cited by 309
Criales, L. E., Arısoy, Y. M., Lane, B., Moylan, S., Donmez, A., & Özel, T. (2017) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2017.03.004 · Cited by 309
Self-citationQuality control of laser- and powder bed-based Additive Manufacturing (AM) technologies
Berumen, S., Bechmann, F., Lindner, S., Kruth, J.-P., & Craeghs, T. (2010) · Physics Procedia · doi:10.1016/j.phpro.2010.08.089 · Cited by 307
Kolbus, L. M., Payzant, E. A., Cornwell, P., Watkins, T. R., Babu, S. S., Dehoff, R., Lorenz, M., Ovchinnikova, O. S., & Duty, C. (2015) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-014-2722-2 · Cited by 302
Balling processes during selective laser treatment of powders
Tolochko, N. K., Mozzharov, S. E., Yadroitsev, I. A., Laoui, T., Froyen, L., Titov, V. I., & Ignatiev, M. B. (2004) · Rapid Prototyping Journal · doi:10.1108/13552540410526953 · Cited by 299
Benedetti, M., Fontanari, V., Bandini, M., Zanini, F., & Carmignato, S. (2018) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2017.10.021 · Cited by 297
Self-citationLaser polishing of additive manufactured Ti alloys
Ma, C. P., Guan, Y. C., & Zhou, W. (2017) · Optics and Lasers in Engineering · doi:10.1016/j.optlaseng.2017.02.005 · Cited by 296
Manufacturing by combining Selective Laser Melting and Selective Laser Erosion/laser re-melting
Yasa, E., Kruth, J.-P., & Deckers, J. (2011) · CIRP Annals · doi:10.1016/j.cirp.2011.03.063 · Cited by 265
Laser polishing of parts built up by selective laser sintering
Lamikiz, A., Sánchez, J. A., López de Lacalle, L. N., & Arana, J. L. (2007) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2007.01.013 · Cited by 264
Residual stresses in LENS® components using neutron diffraction and contour method
Rangaswamy, P., Griffith, M. L., Prime, M. B., Holden, T. M., Rogge, R. B., Edwards, J. M., & Sebring, R. J. (2005) · Materials Science and Engineering A · doi:10.1016/j.msea.2005.02.019 · Cited by 256
Wang, D., Liu, Y., Yang, Y., & Xiao, D. (2016) · Rapid Prototyping Journal · doi:10.1108/rpj-06-2015-0078 · Cited by 254
Surface texture measurement for additive manufacturing
Triantaphyllou, A., Giusca, C. L., Macaulay, G. D., Roerig, F., Hoebel, M., Leach, R. K., Tomita, B., & Milne, K. A. (2015) · Surface Topography: Metrology and Properties · doi:10.1088/2051-672x/3/2/024002 · Cited by 252
Self-citationHeight control of laser metal-wire deposition based on iterative learning control and 3D scanning
Heralić, A., Christiansson, A.-K., & Lennartson, B. (2012) · Optics and Lasers in Engineering · doi:10.1016/j.optlaseng.2012.03.016 · Cited by 252
Malekipour, E., & El-Mounayri, H. (2018) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-017-1172-6 · Cited by 230
Mani, M., Lane, B. M., Donmez, M. A., Feng, S. C., & Moylan, S. P. (2017) · International Journal of Production Research · doi:10.1080/00207543.2016.1223378 · Cited by 225
DePond, P. J., Guss, G., Ly, S., Calta, N. P., Deane, D., Khairallah, S., & Matthews, M. J. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.05.050 · Cited by 222
Adaptive slicing using stepwise uniform refinement
Sabourin, E., Houser, S. A., & Bøhn, J. H. (1996) · Rapid Prototyping Journal · doi:10.1108/13552549610153370 · Cited by 221
Effect of process parameters settings and thickness on surface roughness of EBM produced Ti‐6Al‐4V
Safdar, A., He, H. Z., Wei, L., Snis, A., & Chavez de Paz, L. E. (2012) · Rapid Prototyping Journal · doi:10.1108/13552541211250391 · Cited by 214
On the use of spatter signature for in-situ monitoring of Laser Powder Bed Fusion
Repossini, G., Laguzza, V., Grasso, M., & Colosimo, B. M. (2017) · Additive Manufacturing · doi:10.1016/j.addma.2017.05.004 · Cited by 206
A survey of the design methods for additive manufacturing to improve functional performance
Tang, Y., & Zhao, Y. F. (2016) · Rapid Prototyping Journal · doi:10.1108/rpj-01-2015-0011 · Cited by 193
Feedback control of selective laser melting
Kruth, J., Mercelis, P., Vaerenbergh, J. V., & Craeghs, T. (2007) · Lirias (KU Leuven) · Cited by 192
Porosity testing methods for the quality assessment of selective laser melted parts
Wits, W. W., Carmignato, S., Zanini, F., & Vaneker, T. H. J. (2016) · CIRP Annals · doi:10.1016/j.cirp.2016.04.054 · Cited by 190
Self-citationPrabhakar, P., Sames, W. J., Dehoff, R., & Babu, S. S. (2015) · Additive Manufacturing · doi:10.1016/j.addma.2015.03.003 · Cited by 185
In situ surface topography of laser powder bed fusion using fringe projection
Zhang, B., Ziegert, J. C., Farahi, F., & Davies, A. D. (2016) · Additive manufacturing · doi:10.1016/j.addma.2016.08.001 · Cited by 167
Maskery, I., Aremu, A., Simonelli, M., Tuck, C. J., Wildman, R. D., Ashcroft, I., & Hague, R. (2015) · Experimental Mechanics · doi:10.1007/s11340-015-0021-5 · Cited by 166
An Additive Manufacturing Test Artifact
Moylan, S. P., Slotwinski, J. A., Cooke, A., Jurrens, K. K., & Donmez, M. A. (2014) · Journal of Research of the National Institute of Standards and Technology · doi:10.6028/jres.119.017 · Cited by 156
14th World conference on non-destructive testing
(1994) · International Journal of Pressure Vessels and Piping · doi:10.1016/0308-0161(94)90120-1 · Cited by 156
Handbook of Optical Dimensional Metrology
Harding, K. G. (2013) · CRC Press eBooks · doi:10.1201/b13855 · Cited by 153
Online Quality Control of Selective Laser Melting
Craeghs, T., Clijsters, S., Yasa, E., & Kruth, J. (2011) · Lirias · doi:10.26153/tsw/15289 · Cited by 149
Thermography for Monitoring the Selective Laser Melting Process
Krauss, H., Eschey, C., & Zaeh, M. F. (2012) · doi:10.26153/tsw/15406 · Cited by 149
Towards geometrical calibration of x-ray computed tomography systems—a review
Ferrucci, M., Leach, R., Giusca, C. L., et al. (2015) · Measurement Science and Technology · doi:10.1088/0957-0233/26/9/092003 · Cited by 145
Self-citationTopography of selectively laser melted surfaces: A comparison of different measurement methods
Thompson, A., Senin, N., Giusca, C. L., & Leach, R. (2017) · CIRP Annals · doi:10.1016/j.cirp.2017.04.075 · Cited by 142
Self-citationThe skin model, a comprehensive geometric model for engineering design
Anwer, N., Ballu, A., & Mathieu, L. (2013) · CIRP Annals · doi:10.1016/j.cirp.2013.03.078 · Cited by 141
Characterization of typical surface effects in additive manufacturing with confocal microscopy
Grimm, T., Wiora, G., & Witt, G. (2015) · Surface Topography Metrology and Properties · doi:10.1088/2051-672x/3/1/014001 · Cited by 141
Pyrometric analysis of thermal processes in SLM technology
Pavlov, M. D., Doubenskaia, M., & Smurov, I. Y. (2010) · Physics Procedia · doi:10.1016/j.phpro.2010.08.080 · Cited by 140
Spatially resolved acoustic spectroscopy for selective laser melting
Smith, R. J., Hirsch, M., Patel, R., Li, W., Clare, A. T., & Sharples, S. D. (2016) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2016.05.005 · Cited by 139
Error Detection in Laser Beam Melting Systems by High Resolution Imaging
Kleszczynski, S., Jacobsmühlen, J. Z., Sehrt, J. T., & Witt, G. (2012) · RWTH Publications (RWTH Aachen) · doi:10.26153/tsw/15404 · Cited by 138
Alrbaey, K., Wimpenny, D. I., Tosi, R., Manning, W. J., & Moroz, A. (2014) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-014-0993-9 · Cited by 136
Geometrical effects on residual stress in selective laser melting
Parry, L., Ashcroft, I., & Wildman, R. D. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.09.026 · Cited by 131
Investigation of Residual Stresses Induced during the Selective Laser Melting Process
Belle, L. V., Vansteenkiste, G., & Boyer, J. C. (2013) · Key engineering materials · doi:10.4028/www.scientific.net/kem.554-557.1828 · Cited by 130
Overview of melt dynamics in laser processing
Mazumder, J. (1991) · Optical Engineering · doi:10.1117/12.55899 · Cited by 129
Influence of Shot Peening on AlSi10Mg Parts Fabricated by Additive Manufacturing
Maamoun, A. H., Elbestawi, M. A., & Veldhuis, S. C. (2018) · Journal of Manufacturing and Materials Processing · doi:10.3390/jmmp2030040 · Cited by 129
Characterization of in-situ measurements based on layerwise imaging in laser powder bed fusion
Caltanissetta, F., Grasso, M., Petrò, S., & Colosimo, B. M. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.09.017 · Cited by 122
Areal topography measurement of metal additive surfaces using focus variation microscopy
Newton, L., Senin, N., Gomez, C., Danzl, R., Helmli, F., Blunt, L. A., & Leach, R. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.11.013 · Cited by 119
Self-citationNassar, A. R., Keist, J. S., Reutzel, E. W., & Spurgeon, T. J. (2015) · Additive manufacturing · doi:10.1016/j.addma.2015.03.005 · Cited by 111
A Review of Test Artifacts for Additive Manufacturing
Moylan, S. P., Cooke, A., Jurrens, K. K., Slotwinski, J. A., & Donmez, M. A. (2012) · doi:10.6028/nist.ir.7858 · Cited by 110
Kerckhofs, G., Pyka, G., Moesen, M., Bael, S. V., Schrooten, J., & Wevers, M. (2012) · Advanced Engineering Materials · doi:10.1002/adem.201200156 · Cited by 107
Xu, F., Dhokia, V. G., Colegrove, P. A., McAndrew, A. R., Williams, S., Henstridge, A., & Newman, S. T. (2018) · International Journal of Computer Integrated Manufacturing · doi:10.1080/0951192x.2018.1466395 · Cited by 101
Spatially weighted PCA for monitoring video image data with application to additive manufacturing
Colosimo, B. M., & Grasso, M. (2018) · Journal of Quality Technology · doi:10.1080/00224065.2018.1507563 · Cited by 101
CIRP Encyclopedia of Production Engineering
(2014) · Springer eBooks · doi:10.1007/978-3-642-35950-7 · Cited by 95
An open-architecture metal powder bed fusion system for in-situ process measurements
Bidare, P., Maier, R. R. J., Beck, R. J., Shephard, J. D., & Moore, A. J. (2017) · Additive manufacturing · doi:10.1016/j.addma.2017.06.007 · Cited by 91
Layerwise monitoring of electron beam melting via backscatter electron detection
Arnold, C., Pobel, C. R., Osmanlic, F., & Körner, C. (2018) · Rapid Prototyping Journal · doi:10.1108/rpj-02-2018-0034 · Cited by 91
Stavroulakis, P. I., & Leach, R. (2016) · Review of Scientific Instruments · doi:10.1063/1.4944983 · Cited by 83
Self-citationKiekens, K., Welkenhuyzen, F., Tan, Y., et al. (2011) · Measurement Science and Technology · doi:10.1088/0957-0233/22/11/115502 · Cited by 80
Hong, M.-H., Min, B., & Kwon, T. (2016) · Applied Sciences · doi:10.3390/app6120401 · Cited by 80
Process Maps for Controlling Residual Stress and Melt Pool Size in Laser-Based SFF Processes 200
Vasinonta, A., Beuth, J., & Griffith, M. L. (2000) · doi:10.26153/tsw/3038 · Cited by 80
Integration of a Thermal Imaging Feedback Control System in Electron Beam Melting
Rodriguez, E., Medina, F. R., Espalin, D., Terrazas, C. A., Muse, D., Henry, C., MacDonald, E. W., & Wicker, R. B. (2012) · doi:10.26153/tsw/15402 · Cited by 78
Thermal near infrared monitoring system for electron beam melting with emissivity tracking
Boone, N. A., Zhu, C., Smith, C. J. M., Todd, I., & Willmott, J. R. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.06.004 · Cited by 71
Santos, V. M. R., Thompson, A., Sims-Waterhouse, D., Maskery, I., Woolliams, P., & Leach, R. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.100964 · Cited by 68
Self-citationMonitoring of Laser Consolidation Process of Metal Powder with High Speed Video Camera
FURUMOTO, T., Alkahari, M. R., Takashi, U. E. D. A., Aziz, M. S. A., & Hosokawa, A. (2012) · Physics Procedia · doi:10.1016/j.phpro.2012.10.098 · Cited by 66
Towards in-process x-ray CT for dimensional metrology
Warnett, J. M., Titarenko, V., Kiraci, E., Attridge, A., Lionheart, W. R. B., Withers, P. J., & Williams, M. A. (2016) · Measurement Science and Technology · doi:10.1088/0957-0233/27/3/035401 · Cited by 64
Demir, A. G., Giorgi, C. D., & Previtali, B. (2017) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4038568 · Cited by 63
Qualification of rapid prototyping tools: proposition of a procedure and a test part
Scaravetti, D., Dubois, P., & Duchamp, R. (2007) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-007-1129-2 · Cited by 62
Internal surface measurement of metal powder bed fusion parts
Thompson, A., Senin, N., Maskery, I., Körner, L., Lawes, S., & Leach, R. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.01.003 · Cited by 52
Self-citationTraceable volume measurements using coordinate measuring systems
Carmignato, S., & Savio, E. (2011) · CIRP Annals · doi:10.1016/j.cirp.2011.03.061 · Cited by 47
Self-citationDevelopment of an Acoustic Process Monitoring System for Selective Laser Melting (SLM)
Eschner, N., Weiser, L., Hafner, B. D., & Lanza, G. (2018) · doi:10.26153/tsw/17205 · Cited by 41
Elevated Region Area Measurement for Quantitative Analysis of Laser Beam Melting Process Stability
Jacobsmühlen, J. Z., Witt, G., Kleszczynski, S., & Merhof, D. (2015) · Cited by 40
Design and freeform fabrication of deployable structures with lattice skins
Maheshwaraa, U., Bourell, D. L., & Seepersad, C. C. (2007) · Rapid Prototyping Journal · doi:10.1108/13552540710776160 · Cited by 39
Self-citationSurface topography investigations on nickel alloy 625 fabricated via laser powder bed fusion
Özel, T., Altay, A., Donmez, A. M., & Leach, R. (2017) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-017-1187-z · Cited by 39
Self-citationInformation exchange standards for design, tolerancing and Additive Manufacturing: a research review
Xiao, J., Anwer, N., Durupt, A., Duigou, J. L., & Eynard, B. (2017) · International Journal on Interactive Design and Manufacturing (IJIDeM) · doi:10.1007/s12008-017-0401-4 · Cited by 37
Thompson, A., Senin, N., Maskery, I., & Leach, R. (2018) · Precision Engineering · doi:10.1016/j.precisioneng.2018.02.014 · Cited by 37
Self-citationFahad, M., & Hopkinson, N. (2016) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-016-9036-z · Cited by 36
Wong, H., Neary, D., Jones, E., Fox, P., & Sutcliffe, C. J. (2018) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-018-2702-6 · Cited by 35
Hirsch, M., Catchpole-Smith, S., Patel, R., Marrow, P., Li, W., Tuck, C. J., Sharples, S. D., & Clare, A. T. (2017) · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · doi:10.1098/rspa.2017.0194 · Cited by 34
Dimensional stability during post-processing of selective laser sintered ceramic preforms
Stevinson, B., Bourell, D. L., & Beaman, J. J. (2006) · Virtual and Physical Prototyping · doi:10.1080/17452750601107003 · Cited by 27
Self-citationResidual Stress in Metal Specimens Produced by Direct Metal Laser Sintering
Yadroitsava, I., & Yadroitsev, I. A. (2015) · Cited by 26
Se, S., & Pears, N. E. (2012) · Springer eBooks · doi:10.1007/978-1-4471-4063-4_2 · Cited by 15
Tolerancing and Verification of Additive Manufactured Lattice with Supplemental Surfaces
Ameta, G., Fox, J. C., & Witherell, P. (2018) · Procedia CIRP · doi:10.1016/j.procir.2018.02.023 · Cited by 13
PARAMETERS INFLUENCING THE PRECISION OF SLM PRODUCTION
Keller, P., & Mendřický, R. (2015) · MM Science Journal · doi:10.17973/mmsj.2015_10_201540 · Cited by 10
Li, C., Liu, J. F., Guo, Y. B., & Li, Z. Y. (2020) · Cited by 8
Cited by
Jafari, D., Vaneker, T. H. J., & Gibson, I. (2021) · Materials & Design · doi:10.1016/j.matdes.2021.109471 · Cited by 605
Defects and anomalies in powder bed fusion metal additive manufacturing
Mostafaei, A., Zhao, C., He, Y., Reza Ghiaasiaan, S., Shi, B., Shao, S., Shamsaei, N., Wu, Z., Kouraytem, N., Sun, T., et al. (2022) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2021.100974 · Cited by 491
Design for additive manufacturing: Framework and methodology
Vaneker, T., Bernard, A., Moroni, G., Gibson, I., & Zhang, Y. (2020) · CIRP Annals · doi:10.1016/j.cirp.2020.05.006 · Cited by 289
Robotics and Additive Manufacturing in the Construction Industry
Tankova, T., & da Silva, L. S. (2020) · Current Robotics Reports · doi:10.1007/s43154-020-00003-8 · Cited by 29
Human in the AI Loop via xAI and Active Learning for Visual Inspection
Rožanec, J. M., Montini, E., Cutrona, V., Papamartzivanos, D., Klemenčič, T., Fortuna, B., Mladenić, D., Veliou, E., Giannetsos, T., & Emmanouilidis, C. (2024) · Artificial Intelligence in Manufacturing · doi:10.1007/978-3-031-46452-2_22 · Cited by 17
Metadata
- Authors
- Leach, R. K., Bourell, D., Carmignato, S., Donmez, A., Senin, N., & Dewulf, W.
- Venue
- CIRP Annals
- Publisher
- Elsevier BV
- Published
- 2019
- Volume
- 68
- Issue
- 2
- Pages
- 677-700
- ISSN
- 0007-8506 (ISSN-L)
- OpenAlex
- W2950932307
- Cited by
- 289
- References
- 142
- FWCI
- 22.05
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.