Additive manufacturing of natural fiber reinforced polymer composites: Processing and prospects

Additive manufacturing (3D printing): A review of materials, methods, applications and challenges

Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. Q., & Hui, D. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.02.012 · Cited by 8,431

Biocomposites reinforced with natural fibers: 2000–2010

Faruk, O., Bledzki, A. K., Fink, H.-P., & Sain, M. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.04.003 · Cited by 4,262

A review of recent developments in natural fibre composites and their mechanical performance

Pickering, K. L., Efendy, M. G. A., & Le, T. M. (2016) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2015.08.038 · Cited by 3,479

3D printing of polymer matrix composites: A review and prospective

Wang, X., Jiang, M., Zhou, Z., Gou, J., & Hui, D. (2017) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2016.11.034 · Cited by 3,325

Chemical Treatments of Natural Fiber for Use in Natural Fiber-Reinforced Composites: A Review

Li, X., Tabil, L. G., & Panigrahi, S. (2007) · Journal of Polymers and the Environment · doi:10.1007/s10924-006-0042-3 · Cited by 2,921

Natural fibres: Can they replace glass in fibre reinforced plastics?

Wambua, P., Ivens, J., & Verpoest, I. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00096-4 · Cited by 2,676

A review on stereolithography and its applications in biomedical engineering

Melchels, F. P. W., Feijen, J., & Grijpma, D. W. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.04.050 · Cited by 2,457

Natural fiber polymer composites: A review

Saheb, D. N., & Jog, J. P. (1999) · Advances in Polymer Technology · doi:10.1002/(sici)1098-2329(199924)18:4<351::aid-adv6>3.0.co;2-x · Cited by 2,429

Are natural fiber composites environmentally superior to glass fiber reinforced composites?

Joshi, S. V., Drzal, L. T., Mohanty, A. K., & Arora, S. (2004) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2003.09.016 · Cited by 2,335

Silane coupling agents used for natural fiber/polymer composites: A review

Xie, Y., Hill, C. A. S., Xiao, Z., Militz, H., & Mai, C. (2010) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2010.03.005 · Cited by 2,244

Sustainable Bio-Composites from Renewable Resources: Opportunities and Challenges in the Green Materials World

Mohanty, A. K., Misra, M., & Drzal, L. T. (2002) · Journal of Polymers and the Environment · doi:10.1023/a:1021013921916 · Cited by 2,151

Additive manufacturing: technology, applications and research needs

Guo, N., & Leu, M. C. (2013) · Frontiers of Mechanical Engineering · doi:10.1007/s11465-013-0248-8 · Cited by 2,073

Chemical treatments on plant-based natural fibre reinforced polymer composites: An overview

Kabir, M. M., Wang, H., Lau, K. T., & Cardona, F. (2012) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2012.04.053 · Cited by 1,851

Additive manufacturing of carbon fiber reinforced thermoplastic composites using fused deposition modeling

Ning, F., Cong, W., Qiu, J., Wei, J., & Wang, S. (2015) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2015.06.013 · Cited by 1,718

Chemical modification of hemp, sisal, jute, and kapok fibers by alkalization

Mwaikambo, L. Y., & Ansell, M. P. (2002) · Journal of Applied Polymer Science · doi:10.1002/app.10460 · Cited by 1,694

A Review on Natural Fiber Reinforced Polymer Composite and Its Applications

Mohammed, L., Ansari, M. N. M., Pua, G., Jawaid, M., & Islam, M. S. (2015) · International Journal of Polymer Science · doi:10.1155/2015/243947 · Cited by 1,657

Characterization and properties of natural fiber polymer composites: A comprehensive review

Sanjay, M. R., Madhu, P., Jawaid, M., Senthamaraikannan, P., Senthil, S., & Pradeep, S. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.10.101 · Cited by 1,652

3D‐Printing of Lightweight Cellular Composites

Compton, B. G., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201401804 · Cited by 1,626

Natural-fiber-reinforced polymer composites in automotive applications

Holbery, J., & Houston, D. (2006) · JOM · doi:10.1007/s11837-006-0234-2 · Cited by 1,565

Bone tissue engineering using polycaprolactone scaffolds fabricated via selective laser sintering

Williams, J. M., Adewunmi, A., Schek, R. M., Flanagan, C. L., Krebsbach, P. H., Feinberg, S. E., Hollister, S. J., & Das, S. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.11.057 · Cited by 1,563

Highly oriented carbon fiber–polymer composites via additive manufacturing

Tekinalp, H. L., Kunc, V., Velez-Garcia, G. M., Duty, C. E., Love, L. J., Naskar, A. K., Blue, C. A., & Ozcan, S. (2014) · Composites Science and Technology · doi:10.1016/j.compscitech.2014.10.009 · Cited by 1,514

Consolidation phenomena in laser and powder-bed based layered manufacturing

Kruth, J.-P., Levy, G., Klocke, F., & Childs, T. H. C. (2007) · CIRP Annals · doi:10.1016/j.cirp.2007.10.004 · Cited by 1,444

Biodegradable composites based on lignocellulosic fibers—An overview

Satyanarayana, K. G., Arizaga, G. G. C., & Wypych, F. (2009) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.12.002 · Cited by 1,421

A review of the recent developments in biocomposites based on natural fibres and their application perspectives

Gurunathan, T., Mohanty, S., & Nayak, S. K. (2015) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2015.06.007 · Cited by 1,362

Recent developments in chemical modification and characterization of natural fiber‐reinforced composites

John, M. J., & Anandjiwala, R. D. (2008) · Polymer Composites · doi:10.1002/pc.20461 · Cited by 1,291

A review of trends and limitations in hydrogel-rapid prototyping for tissue engineering

Billiet, T., Vandenhaute, M., Schelfhout, J., Van Vlierberghe, S., & Dubruel, P. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2012.04.050 · Cited by 1,284

A review on additive manufacturing of polymer-fiber composites

Parandoush, P., & Lin, D. (2017) · Composite Structures · doi:10.1016/j.compstruct.2017.08.088 · Cited by 1,270

A review on interface modification and characterization of natural fiber reinforced plastic composites

George, J., Sreekala, M. S., & Thomas, S. (2001) · Polymer Engineering & Science · doi:10.1002/pen.10846 · Cited by 1,247

Green composites: A review of adequate materials for automotive applications

Koronis, G., Silva, A., & Fontul, M. (2013) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2012.07.004 · Cited by 1,198

Three-dimensional printing of continuous-fiber composites by in-nozzle impregnation

Matsuzaki, R., Ueda, M., Namiki, M., Jeong, T.-K., Asahara, H., Horiguchi, K., Nakamura, T., Todoroki, A., & Hirano, Y. (2016) · Scientific Reports · doi:10.1038/srep23058 · Cited by 1,171

Interface and performance of 3D printed continuous carbon fiber reinforced PLA composites

Tian, X., Liu, T., Yang, C., Wang, Q., & Li, D. (2016) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2016.05.032 · Cited by 1,162

The effect of fiber treatment on the mechanical properties of unidirectional sisal-reinforced epoxy composites

Rong, M. Z., Zhang, M. Q., Liu, Y., Yang, G. C., & Zeng, H. M. (2001) · Composites Science and Technology · doi:10.1016/s0266-3538(01)00046-x · Cited by 1,047

Native Cellulose: Structure, Characterization and Thermal Properties

Poletto, M., Ornaghi, H., & Zattera, A. (2014) · Materials · doi:10.3390/ma7096105 · Cited by 1,038

Materials for additive manufacturing

Bourell, D., Kruth, J. P., Leu, M., Levy, G., Rosen, D., Beese, A. M., & Clare, A. (2017) · CIRP Annals · doi:10.1016/j.cirp.2017.05.009 · Cited by 1,034

Progress Report on Natural Fiber Reinforced Composites: Progress Report on Natural Fiber Composites

Faruk, O., Bledzki, A. K., Fink, H.-P., & Sain, M. (2014) · Macromolecular Materials and Engineering · doi:10.1002/mame.201300008 · Cited by 997

Review: Current international research into cellulosic fibres and composites

Eichhorn, S. J., Baillie, C. A., Zafeiropoulos, N., Mwaikambo, L. Y., Ansell, M. P., Dufresne, A., Entwistle, K. M., Herrera-Franco, P. J., Escamilla, G. C., Groom, L., et al. (2001) · Journal of Materials Science · doi:10.1023/a:1017512029696 · Cited by 943

Fused deposition modeling with polypropylene

Carneiro, O. S., Silva, A. F., & Gomes, R. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.06.053 · Cited by 851

Fabrication of continuous carbon, glass and Kevlar fibre reinforced polymer composites using additive manufacturing

Dickson, A. N., Barry, J. N., McDonnell, K. A., & Dowling, D. P. (2017) · Additive Manufacturing · doi:10.1016/j.addma.2017.06.004 · Cited by 792

Experimental characterization and micrography of 3D printed PLA and PLA reinforced with short carbon fibers

Ferreira, R. T. L., Amatte, I. C., Dutra, T. A., & Bürger, D. (2017) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2017.05.013 · Cited by 764

Plant fibre based bio-composites: Sustainable and renewable green materials

Ramesh, M., Palanikumar, K., & Reddy, K. H. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.05.094 · Cited by 764

Short fiber reinforced composites for fused deposition modeling

Zhong, W., Li, F., Zhang, Z., Song, L., & Li, Z. (2001) · Materials Science and Engineering: A · doi:10.1016/s0921-5093(00)01810-4 · Cited by 721

Rapid prototyping of continuous carbon fiber reinforced polylactic acid composites by 3D printing

Li, N., Li, Y., & Liu, S. (2016) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2016.07.025 · Cited by 707

Short natural-fibre reinforced polyethylene and natural rubber composites: Effect of silane coupling agents and fibres loading

ABDELMOULEH, M., BOUFI, S., BELGACEM, M., & DUFRESNE, A. (2007) · Composites Science and Technology · doi:10.1016/j.compscitech.2006.07.003 · Cited by 691

A review of bast fibres and their composites. Part 1 – Fibres as reinforcements

Summerscales, J., Dissanayake, N. P. J., Virk, A. S., & Hall, W. (2010) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2010.06.001 · Cited by 683

A Review: Natural Fiber Composites Selection in View of Mechanical, Light Weight, and Economic Properties

Ahmad, F., Choi, H. S., & Park, M. K. (2015) · Macromolecular Materials and Engineering · doi:10.1002/mame.201400089 · Cited by 672

Critical factors on manufacturing processes of natural fibre composites

Ho, M.-P., Wang, H., Lee, J.-H., Ho, C.-K., Lau, K.-T., Leng, J., & Hui, D. (2012) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2011.10.001 · Cited by 663

Green composites: a review of material attributes and complementary applications

Dicker, M. P. M., Duckworth, P. F., Baker, A. B., Francois, G., Hazzard, M. K., & Weaver, P. M. (2014) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2013.10.014 · Cited by 650

Additive manufacturing of carbon fiber-reinforced plastic composites using fused deposition modeling: Effects of process parameters on tensile properties

Ning, F., Cong, W., Hu, Y., & Wang, H. (2017) · Journal of Composite Materials · doi:10.1177/0021998316646169 · Cited by 632

Measurements of the mechanical response of unidirectional 3D-printed PLA

Song, Y., Li, Y., Song, W., Yee, K., Lee, K.-Y., & Tagarielli, V. L. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.03.051 · Cited by 624

Thermal decomposition of wood: Influence of wood components and cellulose crystallite size

Poletto, M., Zattera, A. J., Forte, M. M. C., & Santana, R. M. C. (2012) · Bioresource Technology · doi:10.1016/j.biortech.2011.11.122 · Cited by 614

Mechanical and thermal properties of ABS/montmorillonite nanocomposites for fused deposition modeling 3D printing

Weng, Z., Wang, J., Senthil, T., & Wu, L. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.04.045 · Cited by 609

Natural and man-made cellulose fibre-reinforced poly(lactic acid) (PLA) composites: An overview about mechanical characteristics and application areas

Graupner, N., Herrmann, A. S., & Müssig, J. (2009) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2009.04.003 · Cited by 608

In State of Art: Mechanical and tribological behaviour of polymeric composites based on natural fibres

Shalwan, A., & Yousif, B. F. (2013) · Materials & Design · doi:10.1016/j.matdes.2012.07.014 · Cited by 607

Evaluation and prediction of the tensile properties of continuous fiber-reinforced 3D printed structures

Melenka, G. W., Cheung, B. K. O., Schofield, J. S., Dawson, M. R., & Carey, J. P. (2016) · Composite Structures · doi:10.1016/j.compstruct.2016.07.018 · Cited by 597

Interface and bonding mechanisms of plant fibre composites: An overview

Zhou, Y., Fan, M., & Chen, L. (2016) · Composites Part B Engineering · doi:10.1016/j.compositesb.2016.06.055 · Cited by 587

3D Printing of Polymer Nanocomposites via Stereolithography

Manapat, J. Z., Chen, Q., Ye, P., & Advincula, R. C. (2017) · Macromolecular Materials and Engineering · doi:10.1002/mame.201600553 · Cited by 565

Dynamic mechanical and thermal properties of MAPE treated jute/HDPE composites

MOHANTY, S., VERMA, S., & NAYAK, S. (2006) · Composites Science and Technology · doi:10.1016/j.compscitech.2005.06.014 · Cited by 561

A review on new bio-based constituents for natural fiber-polymer composites

Väisänen, T., Das, O., & Tomppo, L. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.02.132 · Cited by 560

A review of process development steps for new material systems in three dimensional printing (3DP)

Utela, B., Storti, D., Anderson, R., & Ganter, M. (2008) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2009.03.002 · Cited by 548

Development of new metal/polymer materials for rapid tooling using Fused deposition modelling

Masood, S. H., & Song, W. Q. (2004) · Materials & Design · doi:10.1016/j.matdes.2004.02.009 · Cited by 543

Dimensional Stability and Mechanical Behaviour of Wood–Plastic Composites Based on Recycled and Virgin High-Density Polyethylene (HDPE)

Adhikary, K. B., Pang, S., & Staiger, M. P. (2008) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2007.10.005 · Cited by 537

Green composites: An overview

Zini, E., & Scandola, M. (2011) · Polymer Composites · doi:10.1002/pc.21224 · Cited by 534

Developing plant fibre composites for structural applications by optimising composite parameters: a critical review

Shah, D. U. (2013) · Journal of Materials Science · doi:10.1007/s10853-013-7458-7 · Cited by 532

Fracture Surface Analysis of 3D-Printed Tensile Specimens of Novel ABS-Based Materials

Torrado Perez, A. R., Roberson, D. A., & Wicker, R. B. (2014) · Journal of Failure Analysis and Prevention · doi:10.1007/s11668-014-9803-9 · Cited by 523

3D printing of wood fibre biocomposites: From mechanical to actuation functionality

Le Duigou, A., Castro, M., Bevan, R., & Martin, N. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.02.018 · Cited by 523

Natural fiber eco‐composites

Bogoeva‐Gaceva, G., Avella, M., Malinconico, M., Buzarovska, A., Grozdanov, A., Gentile, G., & Errico, M. E. (2007) · Polymer Composites · doi:10.1002/pc.20270 · Cited by 521

3D Printing of Continuous Carbon Fibre Reinforced Thermo-Plastic (CFRTP) Tensile Test Specimens

Der Klift, F. V., Koga, Y., Todoroki, A., Ueda, M., Hirano, Y., & Matsuzaki, R. (2016) · Open Journal of Composite Materials · doi:10.4236/ojcm.2016.61003 · Cited by 516

Thermo-mechanical properties of a highly filled polymeric composites for Fused Deposition Modeling

Nikzad, M., Masood, S. H., & Sbarski, I. (2011) · Materials & Design · doi:10.1016/j.matdes.2011.01.056 · Cited by 503

Influence of processing and chemical treatment of flax fibres on their composites

de Weyenberg, I. V., Ivens, J., Coster, A. D., Kino, B., Baetens, E., & Verpoest, I. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00093-9 · Cited by 503

Effect of jute fibre loading on tensile and dynamic mechanical properties of oil palm epoxy composites

Jawaid, M., Khalil, H. P. S. A., Hassan, A., Dungani, R., & Hadiyane, A. (2012) · Composites Part B Engineering · doi:10.1016/j.compositesb.2012.04.068 · Cited by 501

Cell-wall recovery after irreversible deformation of wood

Keckes, J., Burgert, I., Frühmann, K., Müller, M., Kölln, K., Hamilton, M., Burghammer, M., Roth, S. V., Stanzl-Tschegg, S., & Fratzl, P. (2003) · Nature Materials · doi:10.1038/nmat1019 · Cited by 500

Developing Polymer Composite Materials: Carbon Nanotubes or Graphene?

Sun, X., Sun, H., Li, H., & Peng, H. (2013) · Advanced Materials · doi:10.1002/adma.201301926 · Cited by 495

The importance of carbon fiber to polymer additive manufacturing

Love, L. J., Kunc, V., Rios, O., Duty, C. E., Elliott, A. M., Post, B. K., Smith, R. J., & Blue, C. A. (2014) · Journal of Materials Research · doi:10.1557/jmr.2014.212 · Cited by 493

Towards the design of high-performance plant fibre composites

Bourmaud, A., Beaugrand, J., Shah, D. U., Placet, V., & Baley, C. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2018.05.005 · Cited by 492

Fused deposition modelling with ABS–graphene nanocomposites

Dul, S., Fambri, L., & Pegoretti, A. (2016) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2016.03.013 · Cited by 491

Utilization of agricultural and forest industry waste and residues in natural fiber-polymer composites: A review

Väisänen, T., Haapala, A., Lappalainen, R., & Tomppo, L. (2016) · Waste Management · doi:10.1016/j.wasman.2016.04.037 · Cited by 490

Nanofiber‐reinforced polymers prepared by fused deposition modeling

Shofner, M. L., Lozano, K., Rodríguez‐Macías, F. J., & Barrera, E. V. (2003) · Journal of Applied Polymer Science · doi:10.1002/app.12496 · Cited by 484

Thermo-mechanical Characterization of Metal/Polymer Composite Filaments and Printing Parameter Study for Fused Deposition Modeling in the 3D Printing Process

Hwang, S., Reyes, E. I., Moon, K.-S., Rumpf, R. C., & Kim, N. S. (2015) · Journal of Electronic Materials · doi:10.1007/s11664-014-3425-6 · Cited by 482

3D Printable Graphene Composite

Wei, X., Li, D., Jiang, W., Gu, Z., Wang, X., Zhang, Z., & Sun, Z. (2015) · Scientific Reports · doi:10.1038/srep11181 · Cited by 481

Could biopolymers reinforced by randomly scattered flax fibre be used in structural applications?

Bodros, E., Pillin, I., Montrelay, N., & Baley, C. (2007) · Composites Science and Technology · doi:10.1016/j.compscitech.2006.08.024 · Cited by 481

Impact damage resistance of 3D printed continuous fibre reinforced thermoplastic composites using fused deposition modelling

Caminero, M. A., Chacón, J. M., García-Moreno, I., & Rodríguez, G. P. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.04.054 · Cited by 479

The effects of acetylation on properties of flax fibre and its polypropylene composites

Bledzki, A. K., Mamun, A. A., Lucka-Gabor, M., & Gutowski, V. S. (2008) · Express Polymer Letters · doi:10.3144/expresspolymlett.2008.50 · Cited by 476

Effects of environmental conditions on mechanical and physical properties of flax fibers

Stamboulis, A. G., Baillie, C. A., & Peijs, T. (2001) · Composites Part A Applied Science and Manufacturing · doi:10.1016/s1359-835x(01)00032-x · Cited by 463

Toughening of photo-curable polymer networks: a review

Ligon-Auer, S. C., Schwentenwein, M., Gorsche, C., Stampfl, J., & Liska, R. (2016) · Polymer Chemistry · doi:10.1039/c5py01631b · Cited by 447

Interlaminar bonding performance of 3D printed continuous fibre reinforced thermoplastic composites using fused deposition modelling

Caminero, M. A., Chacón, J. M., García-Moreno, I., & Reverte, J. M. (2018) · Polymer Testing · doi:10.1016/j.polymertesting.2018.04.038 · Cited by 421

Carbon storage potential in natural fiber composites

Pervaiz, M., & Sain, M. M. (2003) · Resources, Conservation and Recycling · doi:10.1016/s0921-3449(02)00173-8 · Cited by 413

Digital light processing 3D printing of conductive complex structures

Mu, Q., Wang, L., Dunn, C. K., Kuang, X., Duan, F., Zhang, Z., Qi, H. J., & Wang, T. (2017) · Additive Manufacturing · doi:10.1016/j.addma.2017.08.011 · Cited by 411

Direct writing of three-dimensional webs

Gratson, G. M., Xu, M., & Lewis, J. A. (2004) · Nature · doi:10.1038/428386a · Cited by 389

Prediction of tensile properties of hybrid-natural fiber composites

Venkateshwaran, N., Elayaperumal, A., & Sathiya, G. K. (2012) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2011.08.023 · Cited by 374

3D Optical Printing of Piezoelectric Nanoparticle–Polymer Composite Materials

Kim, K., Zhu, W., Qu, X., Aaronson, C., McCall, W. R., Chen, S., & Sirbuly, D. J. (2014) · ACS Nano · doi:10.1021/nn503268f · Cited by 374

Microwave-sintered 3D printed tricalcium phosphate scaffolds for bone tissue engineering: 3D Printed TCP Scaffolds for Bone Tissue Engineering

Tarafder, S., Balla, V. K., Davies, N. M., Bandyopadhyay, A., & Bose, S. (2013) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.555 · Cited by 364

Natural Fibers, Plastics and Composites

(2004) · Springer eBooks · doi:10.1007/978-1-4419-9050-1 · Cited by 364

Study of moisture absorption in natural fiber plastic composites

WANG, W., Sain, M. M., & COOPER, P. (2005) · Composites Science and Technology · doi:10.1016/j.compscitech.2005.07.027 · Cited by 361

Effects of corona discharge and UV treatment on the properties of jute-fibre epoxy composites

Gassan, J. (2000) · Composites Science and Technology · doi:10.1016/s0266-3538(00)00168-8 · Cited by 355

Engineering and evaluation of hemp fibre reinforced polypropylene composites: Fibre treatment and matrix modification

Beckermann, G. W., & Pickering, K. L. (2008) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2008.03.010 · Cited by 353

Microfluidic Printheads for Multimaterial 3D Printing of Viscoelastic Inks

Hardin, J. O., Ober, T. J., Valentine, A. D., & Lewis, J. A. (2015) · Advanced Materials · doi:10.1002/adma.201500222 · Cited by 340

Static and dynamic mechanical properties of alkali treated unidirectional continuous Palmyra Palm Leaf Stalk Fiber/jute fiber reinforced hybrid polyester composites

Shanmugam, D., & Thiruchitrambalam, M. (2013) · Materials & Design · doi:10.1016/j.matdes.2013.03.048 · Cited by 339

Structural differences between wood species: Evidence from chemical composition, FTIR spectroscopy, and thermogravimetric analysis

Poletto, M., Zattera, A. J., & Santana, R. M. C. (2012) · Journal of Applied Polymer Science · doi:10.1002/app.36991 · Cited by 334

Thermal decomposition of wood: Kinetics and degradation mechanisms

Poletto, M., Zattera, A. J., & Santana, R. M. C. (2012) · Bioresource Technology · doi:10.1016/j.biortech.2012.08.133 · Cited by 331

Preparation and characterization of 3D printed continuous carbon fiber reinforced thermosetting composites

Hao, W., Liu, Y., Zhou, H., Chen, H., & Fang, D. (2018) · Polymer Testing · doi:10.1016/j.polymertesting.2017.11.004 · Cited by 319

Pre-treatment of Flax Fibers for use in Rotationally Molded Biocomposites

Wang, B., Panigrahi, S., Tabil, L. G., & Crerar, W. J. (2007) · Journal of Reinforced Plastics and Composites · doi:10.1177/0731684406072526 · Cited by 316

Mechanical and thermal properties of natural fibers reinforced polymer composites: Doum/low density polyethylene

Arrakhiz, F. Z., El Achaby, M., Malha, M., Bensalah, M. O., Fassi-Fehri, O., Bouhfid, R., Benmoussa, K., & Qaiss, A. (2013) · Materials & Design · doi:10.1016/j.matdes.2012.06.056 · Cited by 315

Dynamical mechanical analysis of sisal/oil palm hybrid fiber‐reinforced natural rubber composites

Jacob, M., Francis, B., Thomas, S., & Varughese, K. T. (2006) · Polymer Composites · doi:10.1002/pc.20250 · Cited by 308

Selective Laser Sintering of PEEK

Schmidt, M., Pohle, D., & Rechtenwald, T. (2007) · CIRP Annals · doi:10.1016/j.cirp.2007.05.097 · Cited by 305

The effect of acetylation on interfacial shear strength between plant fibres and various matrices

Khalil, H. P. S. A., Ismail, H., Rozman, H. D., & Ahmad, M. N. (2001) · European Polymer Journal · doi:10.1016/s0014-3057(00)00199-3 · Cited by 299

Recent developments in 3D printable composite materials

Kalsoom, U., Nesterenko, P. N., & Paull, B. (2016) · RSC Advances · doi:10.1039/c6ra11334f · Cited by 294

Environmental Durability of Flax Fibres and their Composites based on Polypropylene Matrix

Stamboulis, A., Baillie, C. A., Garkhail, S. K., van Melick, H. G. H., & Peijs, T. (2000) · Applied Composite Materials · doi:10.1023/a:1026581922221 · Cited by 291

Surface modification of plant fibers using environment friendly methods for their application in polymer composites, textile industry and antimicrobial activities: A review

Kalia, S., Thakur, K., Celli, A., Kiechel, M. A., & Schauer, C. L. (2013) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2013.04.009 · Cited by 289

Natural fiber-reinforced polymer composites

Taj, S. A., Khan, S., & Munawar, M. A. (2007) · Proceedings of the Pakistan Academy of Sciences · Cited by 287

3D printed continuous fibre reinforced composite corrugated structure

Hou, Z., Tian, X., Zhang, J., & Li, D. (2017) · Composite Structures · doi:10.1016/j.compstruct.2017.10.080 · Cited by 264

Improvement of mechanical performance of industrial hemp fibre reinforced polylactide biocomposites

Sawpan, M. A., Pickering, K. L., & Fernyhough, A. (2011) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2010.12.004 · Cited by 261

Influence of alkali treatment on the interfacial and physico-mechanical properties of industrial hemp fibre reinforced polylactic acid composites

Islam, M. S., Pickering, K. L., & Foreman, N. J. (2010) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2010.01.006 · Cited by 260

Materials perspective of polymers for additive manufacturing with selective laser sintering

Schmid, M., Amado, A., & Wegener, K. (2014) · Journal of Materials Research · doi:10.1557/jmr.2014.138 · Cited by 256

Structure-property relationship of nano enhanced stereolithography resin for desktop SLA 3D printer

Weng, Z., Zhou, Y., Lin, W., Senthil, T., & Wu, L. (2016) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2016.05.035 · Cited by 254

Fiber surface treatment and its effect on mechanical and visco-elastic behaviour of banana/epoxy composite

Venkateshwaran, N., Elaya Perumal, A., & Arunsundaranayagam, D. (2013) · Materials & Design · doi:10.1016/j.matdes.2012.12.001 · Cited by 250

Mechanical properties of chemically-treated hemp fibre reinforced sandwich composites

Kabir, M. M., Wang, H., Lau, K.-T., Cardona, F., & Aravinthan, T. (2011) · Composites Part B Engineering · doi:10.1016/j.compositesb.2011.06.003 · Cited by 245

Effect of recycling on mechanical behaviour of biocompostable flax/poly(l-lactide) composites

Le Duigou, A., Pillin, I., Bourmaud, A., Davies, P., & Baley, C. (2008) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2008.05.008 · Cited by 238

Processing of a Polyamide-12/carbon nanofibre composite by laser sintering

Goodridge, R. D., Shofner, M. L., Hague, R. J. M., McClelland, M., Schlea, M. R., Johnson, R. B., & Tuck, C. J. (2011) · Polymer Testing · doi:10.1016/j.polymertesting.2010.10.011 · Cited by 234

Microwave dielectric characterisation of 3D-printed BaTiO3/ABS polymer composites

Castles, F., Isakov, D., Lui, A., Lei, Q., Dancer, C. E. J., Wang, Y., Janurudin, J. M., Speller, S. C., Grovenor, C. R. M., & Grant, P. S. (2016) · Scientific Reports · doi:10.1038/srep22714 · Cited by 231

Thermal degradation of flax and jute fibers

Gassan, J., & Bledzki, A. K. (2001) · Journal of Applied Polymer Science · doi:10.1002/app.1979 · Cited by 229

3D stereolithography printing of graphene oxide reinforced complex architectures

Lin, D., Jin, S., Zhang, F., Wang, C., Wang, Y., Zhou, C., & Cheng, G. J. (2015) · Nanotechnology · doi:10.1088/0957-4484/26/43/434003 · Cited by 228

The effects of various pulping conditions on crystalline structure of cellulose in cotton linters

Gümüskaya, E., Usta, M., & Kirci, H. (2003) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(03)00157-5 · Cited by 227

Exploring the micromechanical design of plant cell walls

Burgert, I. (2006) · American Journal of Botany · doi:10.3732/ajb.93.10.1391 · Cited by 220

Interfacial performance and fracture patterns of 3D printed continuous carbon fiber with sizing reinforced PA6 composites

Liu, T., Tian, X., Zhang, M., Abliz, D., Li, D., & Ziegmann, G. (2018) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2018.09.001 · Cited by 211

Suitability of PLA/TCP for fused deposition modeling

Drummer, D., Cifuentes‐Cuéllar, S., & Rietzel, D. (2012) · Rapid Prototyping Journal · doi:10.1108/13552541211272045 · Cited by 210

Agro-residue reinforced high-density polyethylene composites: Fiber characterization and analysis of composite properties

Panthapulakkal, S., & Sain, M. M. (2007) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2007.01.015 · Cited by 209

Solvent‐Cast Three‐Dimensional Printing of Multifunctional Microsystems

Guo, S., Gosselin, F., Guerin, N., Lanouette, A., Heuzey, M., & Therriault, D. (2013) · Small · doi:10.1002/smll.201300975 · Cited by 203

Influence of fiber surface treatment and length on physico-chemical properties of short random banana fiber-reinforced castor oil polyurethane composites

Merlini, C., Soldi, V., & Barra, G. M. O. (2011) · Polymer Testing · doi:10.1016/j.polymertesting.2011.08.008 · Cited by 202

Effect of chemical treatment on the thermal properties of hybrid natural fiber‐reinforced composites

Neto, J. S. S., Lima, R. D. A. A., Cavalcanti, D. K. K., de Souza, J. P. B., de Aguiar, R. A. A., & Banea, M. D. (2018) · Journal of Applied Polymer Science · doi:10.1002/app.47154 · Cited by 195

Effect of Plasma Treatment on Structure, Wettability of Jute Fiber and Flexural Strength of its Composite

Sinha, E., & Panigrahi, S. (2009) · Journal of Composite Materials · doi:10.1177/0021998309338078 · Cited by 193

Mechanical properties of high density polyethylene reinforced with chemically modified coir fibers: Impact of chemical treatments

Arrakhiz, F. Z., Achaby, M. E., Kakou, A. C., Vaudreuil, S., Benmoussa, K., Bouhfid, R., Fassi‐Fehri, O., & Qaiss, A. E. K. (2012) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2012.01.020 · Cited by 193

Three-Dimensional Printing Fiber Reinforced Hydrogel Composites

Bakarich, S. E., Gorkin, R., in het Panhuis, M., & Spinks, G. M. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am503878d · Cited by 192

Atomic force microscopy characterization of the surface wettability of natural fibres

Pietak, A., Korte, S., Tan, E., Downard, A., & Staiger, M. P. (2007) · Applied Surface Science · doi:10.1016/j.apsusc.2006.07.082 · Cited by 187

Mechanical performance of Kraft fibre reinforced polypropylene composites: Influence of fibre length, fibre beating and hygrothermal ageing

Beg, M. D. H., & Pickering, K. L. (2008) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2008.08.003 · Cited by 187

Selective laser sintering of hydroxyapatite/poly-ε-caprolactone scaffolds

Eosoly, S., Brabazon, D., Lohfeld, S., & Looney, L. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.07.018 · Cited by 186

Effects of plasma treatment in enhancing the performance of woodfibre-polypropylene composites

Yuan, X., Jayaraman, K., & Bhattacharyya, D. (2004) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2004.06.023 · Cited by 184

Novel biodegradable composites based on treated lignocellulosic waste flour as filler. Part I. Surface chemical modification and characterization of waste flour

Tserki, V., Matzinos, P., Kokkou, S., & Panayiotou, C. (2005) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2004.11.010 · Cited by 184

Thermal stability and thermo-mechanical properties of hemp-high density polyethylene composites: Effect of two different chemical modifications

Lu, N., & Oza, S. (2013) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2012.03.024 · Cited by 183

How filler properties, filler fraction, sample thickness and light source affect light attenuation in particulate filled resin composites

Emami, N., Sjödahl, M., & Söderholm, K.-J. M. (2005) · Dental Materials · doi:10.1016/j.dental.2005.01.002 · Cited by 180

Surface and thermal characterization of natural fibres treated with enzymes

George, M., Mussone, P. G., & Bressler, D. C. (2014) · Industrial Crops and Products · doi:10.1016/j.indcrop.2013.12.037 · Cited by 177

All‐Polystyrene 3D‐Printed Electrochemical Device with Embedded Carbon Nanofiber‐Graphite‐Polystyrene Composite Conductor

Rymansaib, Z., Iravani, P., Emslie, E., Medvidović‐Kosanović, M., Sak‐Bosnar, M., Verdejo, R., & Marken, F. (2016) · Electroanalysis · doi:10.1002/elan.201600017 · Cited by 176

Processing and characterization of a carbon black-filled electrically conductive Nylon-12 nanocomposite produced by selective laser sintering

Athreya, S. R., Kalaitzidou, K., & Das, S. (2010) · Materials Science and Engineering: A · doi:10.1016/j.msea.2009.12.028 · Cited by 175

Sustainable Green Composites: Value Addition to Agricultural Residues and Perennial Grasses

Nagarajan, V., Mohanty, A. K., & Misra, M. (2013) · ACS Sustainable Chemistry & Engineering · doi:10.1021/sc300084z · Cited by 174

Predicting the tensile strength of natural fibre reinforced thermoplastics

Facca, A. G., Kortschot, M. T., & Yan, N. (2007) · Composites Science and Technology · doi:10.1016/j.compscitech.2006.12.018 · Cited by 171

Thermal conductivity and thermal diffusivity analyses of low-density polyethylene composites reinforced with sisal, glass and intimately mixed sisal/glass fibres

Kalaprasad, G., Pradeep, P., Mathew, G., Pavithran, C., & Thomas, S. (2000) · Composites Science and Technology · doi:10.1016/s0266-3538(00)00162-7 · Cited by 168

Vinyl esters: Low cytotoxicity monomers for the fabrication of biocompatible 3D scaffolds by lithography based additive manufacturing

Heller, C., Schwentenwein, M., Russmueller, G., Varga, F., Stampfl, J., & Liska, R. (2009) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.23734 · Cited by 163

High through-plane thermal conductivity of polymer based product with vertical alignment of graphite flakes achieved via 3D printing

Jia, Y., He, H., Geng, Y., Huang, B., & Peng, X. (2017) · Composites Science and Technology · doi:10.1016/j.compscitech.2017.03.035 · Cited by 160

Wood versus Plant Fibers: Similarities and Differences in Composite Applications

Madsen, B., & Gamstedt, E. K. (2013) · Advances in Materials Science and Engineering · doi:10.1155/2013/564346 · Cited by 156

Functionalization, Compatibilization and Properties of Polyolefin Composites with Natural Fibers

Pracellà, M., Haque, M. M., & Álvarez, V. A. (2010) · Polymers · doi:10.3390/polym2040554 · Cited by 155

Dieless Forming of Carbon Fibre Reinforced Plastic Parts Using 3D Printer

Mori, K., Maeno, T., & Nakagawa, Y. (2014) · Procedia Engineering · doi:10.1016/j.proeng.2014.10.196 · Cited by 155

Effect of corona discharge treatment on mechanical and thermal properties of composites based on miscanthus fibres and polylactic acid or polypropylene matrix

Ragoubi, M., George, B., Molina, S., Bienaimé, D., Merlin, A., Hiver, J. M., & Dahoun, A. (2012) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2011.12.025 · Cited by 154

Influence of alkali treatment and fibre length on mechanical properties of short Agave fibre reinforced epoxy composites

Mylsamy, K., & Rajendran, I. (2011) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2011.04.029 · Cited by 153

3D-printable CFR polymer composites with dual-cure sequential IPNs

Griffini, G., Invernizzi, M., Levi, M., et al. (2016) · Polymer · doi:10.1016/j.polymer.2016.03.048 · Cited by 149

3D printing of a multifunctional nanocomposite helical liquid sensor

Guo, S., Yang, X., Heuzey, M.-C., & Therriault, D. (2015) · Nanoscale · doi:10.1039/c5nr00278h · Cited by 147

3D printed components with ultrasonically arranged microscale structure

Llewellyn-Jones, T. M., Drinkwater, B. W., & Trask, R. S. (2016) · Smart Materials and Structures · doi:10.1088/0964-1726/25/2/02lt01 · Cited by 147

Thermal stability and flammability of coconut fiber reinforced poly(lactic acid) composites

Jang, J. Y., Jeong, T. K., Oh, H. J., Youn, J. R., & Song, Y. S. (2011) · Composites Part B Engineering · doi:10.1016/j.compositesb.2011.11.003 · Cited by 145

Experimental and theoretical investigation of prestressed natural fiber-reinforced polylactic acid (PLA) composite materials

Hinchcliffe, S. A., Hess, K. M., & Srubar, W. V. (2016) · Composites Part B Engineering · doi:10.1016/j.compositesb.2016.03.089 · Cited by 145

Hemp fibre reinforced composites using chelator and enzyme treatments

Li, Y., & Pickering, K. (2008) · Composites Science and Technology · doi:10.1016/j.compscitech.2008.08.022 · Cited by 141

A 3D printable diamond polymer composite: a novel material for fabrication of low cost thermally conducting devices

Kalsoom, U., Peristyy, A. A., Nesterenko, P. N., & Paull, B. (2016) · RSC Advances · doi:10.1039/c6ra05261d · Cited by 141

Influence of photostabilizers on wood flour–HDPE composites exposed to xenon-arc radiation with and without water spray

Stark, N. M., & Matuana, L. M. (2006) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2006.08.003 · Cited by 139

Mechanical, rheological, morphological and water absorption properties of maleated polyethylene/hemp composites: Effect of ground tire rubber addition

Kakroodi, A. R., Kazemi, Y., & Rodrigue, D. (2013) · Composites Part B Engineering · doi:10.1016/j.compositesb.2013.03.032 · Cited by 136

Mechanical and microstructural properties of Nylon-12/carbon black composites: Selective laser sintering versus melt compounding and injection molding

Athreya, S. R., Kalaitzidou, K., & Das, S. (2010) · Composites Science and Technology · doi:10.1016/j.compscitech.2010.12.028 · Cited by 135

Correlation of the thermal stability and the decomposition kinetics of six different vegetal fibers

Ornaghi, H. L., Poletto, M., Zattera, A. J., & Amico, S. C. (2013) · Cellulose · doi:10.1007/s10570-013-0094-1 · Cited by 133

Influence of polarity parameters on the mechanical properties of composites from polypropylene fiber and short banana fiber

Paul, S. A., Joseph, K., Mathew, G. D. G., Pothen, L. A., & Thomas, S. (2010) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2010.04.015 · Cited by 132

Effect of Fiber Treatment on Mechanical Properties of Kenaf Fiber-Ecoflex Composites

Ibrahim, N. A., Hadithon, K. A., & Abdan, K. (2009) · Journal of Reinforced Plastics and Composites · doi:10.1177/0731684409347592 · Cited by 132

Effect of core–shell composite particles on the sintering behavior and properties of nano-Al2O3/polystyrene composite prepared by SLS

Zheng, H., Zhang, J., Lu, S., Gaochao, W., & Xu, Z. (2005) · Materials Letters · doi:10.1016/j.matlet.2005.11.003 · Cited by 129

Study of graphene oxide-based 3D printable composites: Effect of the in situ reduction

Chiappone, A., Roppolo, I., Naretto, E., Fantino, E., Calignano, F., Sangermano, M., & Pirri, C. F. (2017) · Composites Part B Engineering · doi:10.1016/j.compositesb.2017.05.049 · Cited by 129

3D Printing Fabrication of Amorphous Thermoelectric Materials with Ultralow Thermal Conductivity

He, M., Zhao, Y., Wang, B., et al. (2015) · Small · doi:10.1002/smll.201502153 · Cited by 126

Chemical modification of hemp fibers by silane coupling agents

Rachini, A., Troëdec, M. L., Peyratout, C. S., & Smith, A. (2011) · Journal of Applied Polymer Science · doi:10.1002/app.34530 · Cited by 122

Development of in-house composite wire based feed stock filaments of fused deposition modelling for wear-resistant materials and structures

Singh, R., Singh, S., & Fraternali, F. (2016) · Composites Part B Engineering · doi:10.1016/j.compositesb.2016.05.038 · Cited by 115

Mechanical properties of sisal fibre at elevated temperatures

Chand, N., & Hashmi, S. A. R. (1993) · Journal of Materials Science · doi:10.1007/bf00356422 · Cited by 112

Influence of coupling agents in the preparation of polypropylene composites reinforced with recycled fibers

Franco‐Marquès, E., Mendez, J. A., Pèlach, M. À., Vilaseca, F., Bayer, J., & Mutjé, P. (2010) · Chemical Engineering Journal · doi:10.1016/j.cej.2010.12.031 · Cited by 106

Extruded short wool fibre composites: Mechanical and fire retardant properties

Kim, N. K., Lin, R., & Bhattacharyya, D. (2014) · Composites Part B Engineering · doi:10.1016/j.compositesb.2014.08.002 · Cited by 106

Improving the mechanical properties of laser‐sintered polyamide 12 through incorporation of carbon nanotubes

Bai, J., Goodridge, R., Hague, R., & Song, M. (2013) · Polymer Engineering and Science · doi:10.1002/pen.23459 · Cited by 105

Interfacial Modification of Hemp Fiber Reinforced Composites Using Fungal and Alkali Treatment

Pickering, K. L., Li, Y., Farrell, R. L., & Lay, M. (2007) · Journal of Biobased Materials and Bioenergy · doi:10.1166/jbmb.2007.1984 · Cited by 100

Porous 3D modeled scaffolds of bioactive glass and photocrosslinkable poly(ε-caprolactone) by stereolithography

Elomaa, L., Kokkari, A. K., Närhi, T. O., et al. (2012) · Composites Science and Technology · doi:10.1016/j.compscitech.2012.10.014 · Cited by 98

Influence of loading rate, alkali fibre treatment and crystallinity on fracture toughness of random short hemp fibre reinforced polylactide bio-composites

Pickering, K. L., Sawpan, M. A., Jayaraman, J., & Fernyhough, A. (2011) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2011.04.020 · Cited by 95

Treating bast fibres with pectinase improves mechanical characteristics of reinforced thermoplastic composites

Saleem, Z., Rennebaum, H., Pudel, F., & Grimm, E. (2007) · Composites Science and Technology · doi:10.1016/j.compscitech.2007.06.005 · Cited by 92

High thermal conductivity and stretchability of layer-by-layer assembled silicone rubber/graphene nanosheets multilayered films

Song, J., Chen, C., & Zhang, Y. (2017) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2017.11.001 · Cited by 92

Special materials used in FDM rapid prototyping technology application

Nováková-Marcinčínová, Ľ., Novák-Marcinčin, J., Barna, J., & Török, J. (2012) · IEEE International Conference on Intelligent Engineering Systems (INES) · doi:10.1109/ines.2012.6249805 · Cited by 90

Effect of jute fibre loading on the mechanical and thermal properties of oil palm–epoxy composites

Jawaid, M., Khalil, H. P. S. A., Bakar, A. A., Hassan, A., & Dungani, R. (2012) · Journal of Composite Materials · doi:10.1177/0021998312450305 · Cited by 85

Composite rapid prototyping: overcoming the drawback of poor mechanical properties

Karalekas, D., & Antoniou, K. (2004) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2004.04.019 · Cited by 84

Additive manufacturing of carbon nanotube‐photopolymer composite radar absorbing materials

Zhang, Y., Li, H., Yang, X. J., Zhang, T., Zhu, K., Si, W., Liu, Z., & Sun, H. (2016) · Polymer Composites · doi:10.1002/pc.24117 · Cited by 84

Polypropylene reinforcement with flax or jute fibre; Influence of microstructure and constituents properties on the performance of composite

Tanguy, M., Bourmaud, A., Beaugrand, J., Gaudry, T., & Baley, C. (2017) · Composites Part B Engineering · doi:10.1016/j.compositesb.2017.11.061 · Cited by 84

Interfacial, dynamic mechanical, and thermal fiber reinforced behavior of MAPE treated sisal fiber reinforced HDPE composites

Mohanty, S., & NAYAK, S. K. (2006) · Journal of Applied Polymer Science · doi:10.1002/app.24799 · Cited by 83

Analysis of green hemp fibre reinforced composites using bag retting and white rot fungal treatments

Li, Y., Pickering, K. L., & Farrell, R. L. (2008) · Industrial Crops and Products · doi:10.1016/j.indcrop.2008.08.005 · Cited by 82

Effects of water immersion ageing on the mechanical properties of flax and jute fibre biocomposites evaluated by nanoindentation and flexural testing

Dhakal, H. N., Zhang, Z., Bennett, N., López-Arraiza, A., & Vallejo, F. (2013) · Journal of Composite Materials · doi:10.1177/0021998313487238 · Cited by 78

On the wear properties of Nylon6-SiC-Al 2 O 3 based fused deposition modelling feed stock filament

Singh, R., Singh, N., Amendola, A., & Fraternali, F. (2017) · Composites Part B Engineering · doi:10.1016/j.compositesb.2017.03.042 · Cited by 69

Dual curing of carbon fiber reinforced photoresins for rapid prototyping

Gupta, A., & Ogale, A. A. (2002) · Polymer Composites · doi:10.1002/pc.10509 · Cited by 67

Microstructuring of Milk-Protein-Coated Flax Fibers

Onwulata, C. I., Cooke, P. H., Harden, J., Liu, Z., Erhan, S. Z., Akin, D. E., & Barton, F. E. (2007) · Journal of Biobased Materials and Bioenergy · doi:10.1166/jbmb.2007.012 · Cited by 64

Fire performance of prefabricated modular units using organoclay/glass fibre reinforced polymer composite

Nguyen, K. T. Q., Ngo, T., Tran, P., Mendis, P. A., Zobec, M., & Aye, L. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.10.100 · Cited by 64

Surface treatment of wood polymer composites for adhesive bonding

Moghadamzadeh, H., Rahimi, H., Asadollahzadeh, M., & Hemmati, A. (2011) · International Journal of Adhesion and Adhesives · doi:10.1016/j.ijadhadh.2011.08.001 · Cited by 59

Mechanical characteristics of fiber‐filled photo‐polymer used in stereolithography

Cheah, C. M., Fuh, J. Y. H., Nee, A. Y. C., et al. (1999) · Rapid Prototyping Journal · doi:10.1108/13552549910278937 · Cited by 58

Synthesis of PA12/functionalized GNP nanocomposite powders for the selective laser sintering process

Kim, H. C., Hahn, H. T., & Yang, Y. S. (2012) · Journal of Composite Materials · doi:10.1177/0021998312441812 · Cited by 58

Mechanical, thermal and morphological properties of a bio-based composite derived from banana plant source

Paul, V., Kanny, K. M., & Redhi, G. G. (2014) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2014.08.032 · Cited by 56

Introduction to Manufacturing of Natural Fibre-Reinforced Polymer Composites

Rahman, M., Parvin, F., Hasan, M., & Hoque, M. E. (2015) · Springer eBooks · doi:10.1007/978-3-319-07944-8_2 · Cited by 56

Studies on mechanical, thermal, and morphological characteristics of biocomposites from biodegradable polymer blends and natural fibers

Muthuraj, R., Misra, M., & Mohanty, A. K. (2015) · Elsevier eBooks · doi:10.1016/b978-1-78242-373-7.00014-7 · Cited by 53

Enzymatic treatment of mechanochemical modified natural bamboo fibers

Liu, L., Cheng, L., Huang, L., & Yu, J. (2012) · Fibers and Polymers · doi:10.1007/s12221-012-0600-3 · Cited by 47

High-strength boehmite-acrylate composites for 3D printing: Reinforced filler-matrix interactions

Han, Y., Wang, F., Wang, H., Jiao, X., & Chen, D. (2017) · Composites Science and Technology · doi:10.1016/j.compscitech.2017.10.026 · Cited by 47

Modification of Cellulose Fiber Surfaces by Use of a Lipase and a Xyloglucan Endotransglycosylase

Gustavsson, M. T., Persson, P. V., Iversen, T., et al. (2004) · Biomacromolecules · doi:10.1021/bm049588i · Cited by 46

Environment friendly, renewable and sustainable poly lactic acid (PLA) based natural fiber reinforced composites – A comprehensive review

Rajeshkumar, G., Arvindh Seshadri, S., Devnani, G. L., Sanjay, M. R., Siengchin, S., Prakash Maran, J., Al-Dhabi, N. A., Karuppiah, P., Mariadhas, V. A., Sivarajasekar, N., et al. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.127483 · Cited by 640

Additively manufactured carbon fiber-reinforced composites: State of the art and perspective

van de Werken, N., Tekinalp, H., Khanbolouki, P., Ozcan, S., Williams, A., & Tehrani, M. (2020) · Additive Manufacturing · doi:10.1016/j.addma.2019.100962 · Cited by 566

A Review on Natural Fiber Reinforced Polymer Composites (NFRPC) for Sustainable Industrial Applications

Kamarudin, S. H., Mohd Basri, M. S., Rayung, M., Abu, F., Ahmad, S., Norizan, M. N., Osman, S., Sarifuddin, N., Desa, M. S. Z. M., Abdullah, U. H., et al. (2022) · Polymers · doi:10.3390/polym14173698 · Cited by 459

Effects of porosity on the mechanical properties of additively manufactured components: a critical review

Al-Maharma, A. Y., Patil, S. P., & Markert, B. (2020) · Materials Research Express · doi:10.1088/2053-1591/abcc5d · Cited by 404

Natural Fiber-Reinforced Polycaprolactone Green and Hybrid Biocomposites for Various Advanced Applications

Ilyas, R., Zuhri, M., Norrrahim, M., Misenan, M., Jenol, M., Samsudin, S., Nurazzi, N., Asyraf, M., Supian, A., Bangar, S., et al. (2022) · Polymers · doi:10.3390/polym14010182 · Cited by 268