The DOI matches its Crossref record; 166 of the 166 references it cites were found in a registry or an index.
Additive manufacturing of polymeric composites from material processing to structural design
Abstract
Abstract Polymeric composites with multi-functionality offer significant advantages over metals, including lightweight, high strength and stiffness, corrosion and fatigue resistance, etc. Additively manufactured composites draw intensive attention over the past decade due to that they exhibit the large potential to extend their applications from rapid prototyping to functional end-use components. Moreover, advances in additive manufacturing (AM) open new perspectives for the next generation of design and manufacturing of composites, which possess spatially digitalized and materialized arrangement of material/structure in a voxel-by-voxel manner. This review examines the work performed in this fast-growing field and elaborates its future perspectives and potentials. Specifically, the polymer AM processes incorporating different types of reinforcements are discussed in terms of mechanism, feedstocks, their advantages, and constraints. Then, the AM-driven designs for polymeric composites on multiscale and for multi-functional applications are emphasized. Further, emerging research topics including digital composites, intelligence/data-driven design approaches, and four-dimensional printing are further addressed with the careful analysis of existing gaps and future research trends. Finally, this review is concluded with an outlook on future research opportunities on AM-fabricated composites from design to fabrication. This review aims to provide a comprehensive guide to the stakeholders who want to utilize or develop an AM process for polymeric composites.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Controlling Electromagnetic Fields
Pendry, J. B., Schurig, D., & Smith, D. R. (2006) · Science · doi:10.1126/science.1125907 · Cited by 8,589
Metamaterial Electromagnetic Cloak at Microwave Frequencies
Schurig, D., Mock, J. J., Justice, B. J., Cummer, S. A., Pendry, J. B., Starr, A. F., & Smith, D. R. (2006) · Science · doi:10.1126/science.1133628 · Cited by 7,586
3D printing of polymer matrix composites: A review and prospective
Wang, X., Jiang, M., Zhou, Z., Gou, J., & Hui, D. (2017) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2016.11.034 · Cited by 3,325
Materials Selection in Mechanical Design
(2011) · Elsevier eBooks · doi:10.1016/c2009-0-25539-5 · Cited by 2,679
Ultralight, ultrastiff mechanical metamaterials
Zheng, X., Lee, H., Weisgraber, T. H., Shusteff, M., DeOtte, J., Duoss, E. B., Kuntz, J. D., Biener, M. M., Ge, Q., Jackson, J. A., et al. (2014) · Science · doi:10.1126/science.1252291 · Cited by 2,308
Printing ferromagnetic domains for untethered fast-transforming soft materials
Kim, Y., Yuk, H., Zhao, R., Chester, S. A., & Zhao, X. (2018) · Nature · doi:10.1038/s41586-018-0185-0 · Cited by 2,183
3D printing of ceramics: A review
Chen, Z., Li, Z., Li, J., Liu, C., Lao, C., Fu, Y., Liu, C., Li, Y., Wang, P., & He, Y. (2019) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2018.11.013 · Cited by 2,109
3D‐Printing of Lightweight Cellular Composites
Compton, B. G., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201401804 · Cited by 1,626
Photopolymerization in 3D Printing
Bagheri, A., & Jin, J. (2019) · ACS Applied Polymer Materials · doi:10.1021/acsapm.8b00165 · Cited by 1,436
Ha, N. S., & Lu, G. (2020) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2019.107496 · Cited by 1,175
Highly compressible 3D periodic graphene aerogel microlattices
Zhu, C., Han, T. Y.-J., Duoss, E. B., Golobic, A. M., Kuntz, J. D., Spadaccini, C. M., & Worsley, M. A. (2015) · Nature Communications · doi:10.1038/ncomms7962 · Cited by 1,148
Voxelated soft matter via multimaterial multinozzle 3D printing
Skylar-Scott, M. A., Mueller, J., Visser, C. W., & Lewis, J. A. (2019) · Nature · doi:10.1038/s41586-019-1736-8 · Cited by 1,024
Wavefront modulation and subwavelength diffractive acoustics with an acoustic metasurface
Xie, Y., Wang, W., Chen, H., Konneker, A., Popa, B.-I., & Cummer, S. A. (2014) · Nature Communications · doi:10.1038/ncomms6553 · Cited by 981
A review of topology optimization for additive manufacturing: Status and challenges
ZHU, J., ZHOU, H., WANG, C., ZHOU, L., YUAN, S., & ZHANG, W. (2021) · Chinese Journal of Aeronautics · doi:10.1016/j.cja.2020.09.020 · Cited by 874
Self-citationCurrent and future trends in topology optimization for additive manufacturing
Liu, J., Gaynor, A. T., Chen, S., Kang, Z., Suresh, K., Takezawa, A., Li, L., Kato, J., Tang, J., Wang, C. C. L., et al. (2018) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-018-1994-3 · Cited by 870
Sankaran, S., Deshmukh, K., Ahamed, M. B., & Khadheer Pasha, S. K. (2018) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2018.08.006 · Cited by 837
Mohr, R., Kratz, K., Weigel, T., Lucka-Gabor, M., Moneke, M., & Lendlein, A. (2006) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0600079103 · Cited by 819
Recent Progress on Polymer Materials for Additive Manufacturing
Tan, L. J., Zhu, W., & Zhou, K. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202003062 · Cited by 740
Direct 4D Printing Via Active Composite Materials
Ding, Z., Yuan, C., Peng, X., Wang, T., Qi, H. J., & Dunn, M. L. (2017) · Science Advances · doi:10.1126/sciadv.1602890 · Cited by 692
Approaching theoretical strength in glassy carbon nanolattices
Bauer, J., Schroer, A., Schwaiger, R., & Kraft, O. (2016) · Nature Materials · doi:10.1038/nmat4561 · Cited by 689
Additive manufacturing of silica aerogels
Zhao, S., Siqueira, G., Drdova, S., Norris, D., Ubert, C., Bonnin, A., Galmarini, S., Ganobjak, M., Pan, Z., Brunner, S., et al. (2020) · Nature · doi:10.1038/s41586-020-2594-0 · Cited by 676
Tailored 3D Mechanical Metamaterials Made by Dip‐in Direct‐Laser‐Writing Optical Lithography
Bückmann, T., Stenger, N., Kadic, M., Kaschke, J., Frölich, A., Kennerknecht, T., Eberl, C., Thiel, M., & Wegener, M. (2012) · Advanced Materials · doi:10.1002/adma.201200584 · Cited by 665
Multi‐Material 3D and 4D Printing: A Survey
Rafiee, M., Farahani, R. D., & Therriault, D. (2020) · Advanced Science · doi:10.1002/advs.201902307 · Cited by 662
A review on machine learning in 3D printing: applications, potential, and challenges
Goh, G. D., Sing, S. L., & Yeong, W. Y. (2021) · Artificial Intelligence Review · doi:10.1007/s10462-020-09876-9 · Cited by 652
Light-weighting in aerospace component and system design
Zhu, L., Li, N., & Childs, P. R. N. (2018) · Propulsion and Power Research · doi:10.1016/j.jppr.2018.04.001 · Cited by 583
Additively manufactured carbon fiber-reinforced composites: State of the art and perspective
van de Werken, N., Tekinalp, H., Khanbolouki, P., Ozcan, S., Williams, A., & Tehrani, M. (2020) · Additive Manufacturing · doi:10.1016/j.addma.2019.100962 · Cited by 566
Advances in 3D printing of thermoplastic polymer composites and nanocomposites
Valino, A. D., Dizon, J. R. C., Espera, A. H., Chen, Q., Messman, J., & Advincula, R. C. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2019.101162 · Cited by 565
Gu, G. X., Chen, C.-T., Richmond, D. J., & Buehler, M. J. (2018) · Materials Horizons · doi:10.1039/c8mh00653a · Cited by 556
Extreme damping in composite materials with negative-stiffness inclusions
Lakes, R. S., Lee, T., Bersie, A., & Wang, Y. C. (2001) · Nature · doi:10.1038/35069035 · Cited by 534
Recent developments in polymers/polymer nanocomposites for additive manufacturing
Wu, H., Fahy, W. P., Kim, S., Kim, H., Zhao, N., Pilato, L., Kafi, A., Bateman, S., & Koo, J. H. (2020) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100638 · Cited by 531
Qi, X., Chen, G., Li, Y., Cheng, X., & Li, C. (2019) · Engineering · doi:10.1016/j.eng.2019.04.012 · Cited by 529
Rapid energy-efficient manufacturing of polymers and composites via frontal polymerization
Robertson, I. D., Yourdkhani, M., Centellas, P. J., Aw, J. E., Ivanoff, D. G., Goli, E., Lloyd, E. M., Dean, L. M., Sottos, N. R., Geubelle, P. H., et al. (2018) · Nature · doi:10.1038/s41586-018-0054-x · Cited by 527
Polymeric composites for powder-based additive manufacturing: Materials and applications
Yuan, S., Shen, F., Chua, C. K., & Zhou, K. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.11.001 · Cited by 525
Self-citation3D-printed bioceramic scaffolds: From bone tissue engineering to tumor therapy.
Ma, H., Feng, C., Chang, J., & Wu, C. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.08.026 · Cited by 512
Chacón, J. M., Caminero, M. Á., López, P. J. N., Plaza, E. G., García-Moreno, I., & Reverte, J. M. (2019) · Composites Science and Technology · doi:10.1016/j.compscitech.2019.107688 · Cited by 512
Sequential Self-Folding Structures by 3D Printed Digital Shape Memory Polymers
Mao, Y., Yu, K., Isakov, M. S., Wu, J., Dunn, M. L., & Jerry Qi, H. (2015) · Scientific Reports · doi:10.1038/srep13616 · Cited by 510
A comprehensive review of the photopolymerization of ceramic resins used in stereolithography
Zakeri, S., Vippola, M., & Levänen, E. (2020) · Additive Manufacturing · doi:10.1016/j.addma.2020.101177 · Cited by 496
Novel Biomaterials Used in Medical 3D Printing Techniques
Tappa, K., & Jammalamadaka, U. (2018) · Journal of Functional Biomaterials · doi:10.3390/jfb9010017 · Cited by 490
Lightweight Mechanical Metamaterials with Tunable Negative Thermal Expansion
Wang, Q., Jackson, J. A., Ge, Q., Hopkins, J. B., Spadaccini, C. M., & Fang, N. X. (2016) · Physical Review Letters · doi:10.1103/physrevlett.117.175901 · Cited by 481
Cui, H., Hensleigh, R., Yao, D., Maurya, D., Kumar, P., Kang, M. G., Priya, S., & Zheng, X. (2019) · Nature Materials · doi:10.1038/s41563-018-0268-1 · Cited by 481
De novo composite design based on machine learning algorithm
Gu, G. X., Chen, C.-T., & Buehler, M. J. (2018) · Extreme Mechanics Letters · doi:10.1016/j.eml.2017.10.001 · Cited by 470
Negative refractive index metamaterials
Padilla, W. J., Basov, D. N., & Smith, D. R. (2006) · Materials Today · doi:10.1016/s1369-7021(06)71573-5 · Cited by 448
Gobert, C., Reutzel, E. W., Petrich, J., Nassar, A. R., & Phoha, S. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.04.005 · Cited by 447
An Introduction to Structural Optimization
(2008) · Solid Mechanics and Its Applications · doi:10.1007/978-1-4020-8666-3 · Cited by 445
Emerging 3D‐Printed Electrochemical Energy Storage Devices: A Critical Review
Tian, X., Jin, J., Yuan, S., Chua, C. K., Tor, S. B., & Zhou, K. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700127 · Cited by 407
Self-citationFrom Topology Optimization Design to Additive Manufacturing: Today’s Success and Tomorrow’s Roadmap
Meng, L., Zhang, W., Quan, D., Shi, G., Tang, L., Hou, Y., Breitkopf, P., Zhu, J., & Gao, T. (2020) · Archives of Computational Methods in Engineering · doi:10.1007/s11831-019-09331-1 · Cited by 402
Self-citationMulti-shape active composites by 3D printing of digital shape memory polymers
Wu, J., Yuan, C., Ding, Z., Isakov, M., Mao, Y., Wang, T., Dunn, M. L., & Qi, H. J. (2016) · Scientific Reports · doi:10.1038/srep24224 · Cited by 399
Hierarchically Enhanced Impact Resistance of Bioinspired Composites
Gu, G. X., Takaffoli, M., & Buehler, M. J. (2017) · Advanced Materials · doi:10.1002/adma.201700060 · Cited by 396
3D‐Printed Mechanical Metamaterials with High Energy Absorption
Yuan, S., Chua, C. K., & Zhou, K. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201800419 · Cited by 380
Self-citationScime, L., & Beuth, J. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2018.11.010 · Cited by 369
Deep learning for topology optimization of 2D metamaterials
Kollmann, H. T., Abueidda, D. W., Koric, S., Guleryuz, E., & Sobh, N. A. (2020) · Materials & Design · doi:10.1016/j.matdes.2020.109098 · Cited by 361
3D printed reversible shape changing components with stimuli responsive materials
Mao, Y., Ding, Z., Yuan, C., Ai, S., Isakov, M., Wu, J., Wang, T., Dunn, M. L., & Qi, H. J. (2016) · Scientific Reports · doi:10.1038/srep24761 · Cited by 348
Fabrication of highly conductive graphene flexible circuits by 3D printing
Zhang, D., Chi, B., Li, B., Gao, Z., Du, Y., Guo, J., & Wei, J. (2016) · Synthetic Metals · doi:10.1016/j.synthmet.2016.03.014 · Cited by 336
3D printing electronic components and circuits with conductive thermoplastic filament
Flowers, P. F., Reyes, C., Ye, S., Kim, M. J., & Wiley, B. J. (2017) · Additive Manufacturing · doi:10.1016/j.addma.2017.10.002 · Cited by 333
Materials selection in mechanical design
Summerscales, J. (1993) · Composites Manufacturing · doi:10.1016/0956-7143(93)90102-e · Cited by 329
Direct ink writing advances in multi-material structures for a sustainable future
Rocha, V. G., Saiz, E., Tirichenko, I. S., & García-Tuñón, E. (2020) · Journal of Materials Chemistry A · doi:10.1039/d0ta04181e · Cited by 327
Two-Way 4D Printing: A Review on the Reversibility of 3D-Printed Shape Memory Materials
Lee, A. Y., An, J., & Chua, C. K. (2017) · Engineering · doi:10.1016/j.eng.2017.05.014 · Cited by 326
Frketic, J., Dickens, T., & Ramakrishnan, S. (2017) · Additive Manufacturing · doi:10.1016/j.addma.2017.01.003 · Cited by 322
Zheng, K., Politis, D. J., Wang, L., & Lin, J. (2018) · International Journal of Lightweight Materials and Manufacture · doi:10.1016/j.ijlmm.2018.03.006 · Cited by 311
Machine learning for composite materials
Chen, C.-T., & Gu, G. X. (2019) · MRS Communications · doi:10.1557/mrc.2019.32 · Cited by 311
A biorobotic adhesive disc for underwater hitchhiking inspired by the remora suckerfish
Wang, Y., Yang, X., Chen, Y., Wainwright, D. K., Kenaley, C. P., Gong, Z., Liu, Z., Liu, H., Guan, J., Wang, T., et al. (2017) · Science Robotics · doi:10.1126/scirobotics.aan8072 · Cited by 308
Li, D., Liao, W., Dai, N., Dong, G., Tang, Y., & Xie, Y. M. (2018) · Computer-Aided Design · doi:10.1016/j.cad.2018.06.003 · Cited by 303
Self-citationNeural networks for topology optimization
Sosnovik, I., & Oseledets, I. (2019) · Russian Journal of Numerical Analysis and Mathematical Modelling · doi:10.1515/rnam-2019-0018 · Cited by 302
Rotational 3D printing of damage-tolerant composites with programmable mechanics
Raney, J. R., Compton, B. G., Mueller, J., Ober, T. J., Shea, K., & Lewis, J. A. (2018) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1715157115 · Cited by 301
Luo, M., Tian, X., Shang, J., Zhu, W., Li, D., & Qin, Y. (2019) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2019.03.020 · Cited by 297
Comparative study on 3D printing of polyamide 12 by selective laser sintering and multi jet fusion
Cai, C., Tey, W. S., Chen, J., Zhu, W., Liu, X., Liu, T., Zhao, L., & Zhou, K. (2021) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2020.116882 · Cited by 288
A review of 3D and 4D printing of natural fibre biocomposites
Le Duigou, A., Correa, D., Ueda, M., Matsuzaki, R., & Castro, M. (2020) · Materials & Design · doi:10.1016/j.matdes.2020.108911 · Cited by 280
Designable dual-material auxetic metamaterials using three-dimensional printing
Wang, K., Chang, Y.-H., Chen, Y., Zhang, C., & Wang, B. (2015) · Materials & Design · doi:10.1016/j.matdes.2014.11.033 · Cited by 268
Magnetic programming of 4D printed shape memory composite structures
Zhang, F., Wang, L., Zheng, Z., Liu, Y., & Leng, J. (2019) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2019.105571 · Cited by 267
Abueidda, D. W., Almasri, M., Ammourah, R., Ravaioli, U., Jasiuk, I. M., & Sobh, N. A. (2019) · Composite Structures · doi:10.1016/j.compstruct.2019.111264 · Cited by 239
A review of 3D printing processes and materials for soft robotics
Yap, Y. L., Sing, S. L., & Yeong, W. Y. (2020) · Rapid Prototyping Journal · doi:10.1108/rpj-11-2019-0302 · Cited by 227
Development of 3D printable formulations containing CNT with enhanced electrical properties
Gonzalez, G., Chiappone, A., Roppolo, I., Fantino, E., Bertana, V., Perrucci, F., Scaltrito, L., Pirri, F., & Sangermano, M. (2017) · Polymer · doi:10.1016/j.polymer.2016.12.051 · Cited by 216
Architected Lattices with High Stiffness and Toughness via Multicore–Shell 3D Printing
Mueller, J., Raney, J. R., Shea, K., & Lewis, J. A. (2018) · Advanced Materials · doi:10.1002/adma.201705001 · Cited by 216
Minimum compliance topology optimization of shell–infill composites for additive manufacturing
Wu, J., Clausen, A., & Sigmund, O. (2017) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2017.08.018 · Cited by 215
Jiang, W., Yan, L., Ma, H., Fan, Y., Wang, J., Feng, M., & Qu, S. (2018) · Scientific Reports · doi:10.1038/s41598-018-23286-6 · Cited by 211
Thermal analysis of additive manufacturing of large-scale thermoplastic polymer composites
Compton, B. G., Post, B., Duty, C., Love, L. J., & Kunc, V. (2017) · Additive manufacturing · doi:10.1016/j.addma.2017.07.006 · Cited by 206
Measuring UV curing parameters of commercial photopolymers used in additive manufacturing
Bennett, J. (2017) · Additive Manufacturing · doi:10.1016/j.addma.2017.10.009 · Cited by 206
Controlling toughness and strength of FDM 3D-printed PLA components through the raster layup
Kiendl, J., & Gao, C. (2020) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2019.107562 · Cited by 206
Tang, Y., Kurtz, A., & Zhao, Y. F. (2015) · Computer-Aided Design · doi:10.1016/j.cad.2015.06.001 · Cited by 198
Self-citationYang, W., An, J., Chua, C. K., & Zhou, K. (2020) · Virtual and Physical Prototyping · doi:10.1080/17452759.2020.1740747 · Cited by 191
Yuan, S., Zheng, Y., Chua, C. K., Yan, Q., & Zhou, K. (2018) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2017.11.007 · Cited by 190
Self-citationO’Connor, H. J., Dickson, A. N., & Dowling, D. P. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.05.035 · Cited by 185
Li, N., Link, G., Wang, T., Ramopoulos, V., Neumaier, D., Hofele, J., Walter, M., & Jelonnek, J. (2019) · Composites Part B Engineering · doi:10.1016/j.compositesb.2019.107612 · Cited by 182
Electrically conductive nanocomposites for fused deposition modelling
Dorigato, A., Moretti, V., Dul, S., Unterberger, S. H., & Pegoretti, A. (2017) · Synthetic Metals · doi:10.1016/j.synthmet.2017.01.009 · Cited by 178
Additive manufacturing of polymer composites: Processing and modeling approaches
El Moumen, A., Tarfaoui, M., & Lafdi, K. (2019) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2019.04.029 · Cited by 178
Bone‐Inspired Materials by Design: Toughness Amplification Observed Using 3D Printing and Testing
Libonati, F., Gu, G. X., Qin, Z., Vergani, L., & Buehler, M. J. (2016) · Advanced Engineering Materials · doi:10.1002/adem.201600143 · Cited by 175
Jin, Z., Zhang, Z., & Gu, G. X. (2020) · Advanced Intelligent Systems · doi:10.1002/aisy.201900130 · Cited by 172
Two-Scale Topology Optimization with Microstructures
Zhu, B., Skouras, M., Chen, D., & Matusik, W. (2017) · ACM Transactions on Graphics · doi:10.1145/3072959.3095815 · Cited by 172
Rong, Q., Wei, H., Huang, X., & Bao, H. (2019) · Composites Science and Technology · doi:10.1016/j.compscitech.2019.107861 · Cited by 168
Characterizing short-fiber-reinforced composites produced using additive manufacturing
Ivey, M. A., Melenka, G. W., Carey, J. P., & Ayranci, C. (2017) · Advanced Manufacturing Polymer & Composites Science · doi:10.1080/20550340.2017.1341125 · Cited by 167
Hou, Z., Tian, X., Zheng, Z., Zhang, J., Zhe, L., Li, D., Malakhov, A. V., & Полилов, А. Н. (2020) · Composites Part B Engineering · doi:10.1016/j.compositesb.2020.107893 · Cited by 167
Lattice Structure Design and Optimization With Additive Manufacturing Constraints
Tang, Y., Dong, G., Zhou, Q., & Zhao, Y. F. (2017) · IEEE Transactions on Automation Science and Engineering · doi:10.1109/tase.2017.2685643 · Cited by 163
Self-citationDeep learning for fabrication and maturation of 3D bioprinted tissues and organs
Ng, W. L., Chan, A., Ong, Y. S., & Chua, C. K. (2020) · Virtual and Physical Prototyping · doi:10.1080/17452759.2020.1771741 · Cited by 161
Laser-based additively manufactured polymers: a review on processes and mechanical models
Brighenti, R., Cosma, M. P., Marșavina, L., Spagnoli, A., & Terzano, M. (2020) · Journal of Materials Science · doi:10.1007/s10853-020-05254-6 · Cited by 159
Programmable morphing composites with embedded continuous fibers by 4D printing
Wang, Q., Tian, X., Huang, L., Li, D., Malakhov, A. V., & Полилов, А. Н. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.06.027 · Cited by 157
A hybrid machine learning approach for additive manufacturing design feature recommendation
Yao, X., Moon, S. K., & Bi, G. (2017) · Rapid Prototyping Journal · doi:10.1108/rpj-03-2016-0041 · Cited by 156
Yan, M., Tian, X., Peng, G., Li, D., & Zhang, X. (2018) · Composites Science and Technology · doi:10.1016/j.compscitech.2018.06.023 · Cited by 155
Sharafi, S., Santare, M. H., Gerdes, J., & Advani, S. G. (2021) · Additive manufacturing · doi:10.1016/j.addma.2020.101830 · Cited by 155
Broadband manipulation of acoustic wavefronts by pentamode metasurface
Tian, Y., Wei, Q., Cheng, Y., Xu, Z. G., & Liu, X. (2015) · Applied Physics Letters · doi:10.1063/1.4936762 · Cited by 154
Printing nature: Unraveling the role of nacre's mineral bridges
Gu, G. X., Libonati, F., Wettermark, S. D., & Buehler, M. J. (2017) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2017.05.007 · Cited by 151
Three-Dimensional Printing of Highly Conductive Carbon Nanotube Microarchitectures with Fluid Ink
Kim, J.-H., Lee, S., Wajahat, M., Jeong, H., Chang, W. S., Jeong, H. J., Yang, J., Kim, J. T., & Seol, S. K. (2016) · ACS Nano · doi:10.1021/acsnano.6b04771 · Cited by 147
Chen, D., Liu, Q., Han, Z., Zhang, J., Song, H., Wang, K., Song, Z., Wen, S., Zhou, Y., Yan, C., et al. (2020) · Advanced Science · doi:10.1002/advs.202000584 · Cited by 147
Design and analysis of digital materials for physical 3D voxel printing
Hiller, J. D., & Lipson, H. (2009) · Rapid Prototyping Journal · doi:10.1108/13552540910943441 · Cited by 146
3D printing high density ceramics using binder jetting with nanoparticle densifiers
Kunchala, P., & Kappagantula, K. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.06.009 · Cited by 146
3D printing of discontinuous and continuous fibre composites using stereolithography
Sano, Y., Matsuzaki, R., Ueda, M., TODOROKI, A., & Hirano, Y. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.10.033 · Cited by 146
High speed 4D printing of shape memory polymers with nanosilica
Choong, Y. Y. C., Maleksaeedi, S., Eng, H., Yu, S., Wei, J., & Su, P. (2019) · Applied Materials Today · doi:10.1016/j.apmt.2019.100515 · Cited by 146
Ming, Y., Zhang, S., Han, W., Wang, B., Duan, Y., & Xiao, H. L. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101184 · Cited by 141
Djumas, L., Molotnikov, A., Simon, G. P., & Estrin, Y. (2016) · Scientific Reports · doi:10.1038/srep26706 · Cited by 138
Laser assisted additive manufacturing of continuous fiber reinforced thermoplastic composites
Parandoush, P., Tucker, L., Zhou, C., & Lin, D. L. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.06.013 · Cited by 128
Yuan, S., Bai, J., Chua, C., et al. (2016) · Polymers · doi:10.3390/polym8100370 · Cited by 126
Self-citationEffective extrusion-based 3D printing system design for cementitious-based materials
Albar, A., Chougan, M., Al‐Kheetan, M. J., Swash, M. R., & Ghaffar, S. H. (2020) · Results in Engineering · doi:10.1016/j.rineng.2020.100135 · Cited by 124
Liu, J., & To, A. C. (2017) · Computer-Aided Design · doi:10.1016/j.cad.2017.05.003 · Cited by 123
Additive manufacturing-driven design optimization: Building direction and structural topology
Li, S., Yuan, S., Zhu, J., Wang, C., Li, J., & Zhang, W. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101406 · Cited by 123
Self-citationMeng, L., Shi, J., Yang, C., Gao, T., Hou, Y., Song, L., Gu, D., Zhu, J., Breitkopf, P., & Zhang, W. (2020) · Extreme Mechanics Letters · doi:10.1016/j.eml.2020.100869 · Cited by 123
Self-citationHua, D., Zhang, X., Ji, Z., Yan, C., Yu, B., Li, Y., Wang, X., & Zhou, F. (2018) · Journal of Materials Chemistry C · doi:10.1039/c7tc05710e · Cited by 122
Design and additive manufacture of functionally graded structures based on digital materials
Ituarte, I. F., Boddeti, N., Hassani, V., Dunn, M. L., & Rosen, D. W. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.100839 · Cited by 119
Data-driven modeling of thermal history in additive manufacturing
Roy, M., & Wodo, O. (2020) · Additive manufacturing · doi:10.1016/j.addma.2019.101017 · Cited by 117
Ultra-programmable buckling-driven soft cellular mechanisms
Janbaz, S., Bobbert, F. S. L., Mirzaali, M. J., & ZADPOOR, A. A. (2019) · Materials Horizons · doi:10.1039/c9mh00125e · Cited by 116
Using convolutional neural networks to predict composite properties beyond the elastic limit
Yang, C., Kim, Y., Ryu, S., & Gu, G. X. (2019) · MRS Communications · doi:10.1557/mrc.2019.49 · Cited by 113
Design for 4D printing: Modeling and computation of smart materials distributions
Sossou, G., Demoly, F., Belkebir, H., Qi, H. J., Gomes, S., & Montavon, G. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.108074 · Cited by 113
Gan, X., Wang, J., Wang, Z., Zheng, Z. Q., Lavorgna, M., Ronca, A., Fei, G., & Xia, H. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.107874 · Cited by 109
Sharma, M., Singh, M. P., Srivastava, C., Madras, G., & Bose, S. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am506042a · Cited by 108
Yuan, S., Bai, J., Chua, C. K., et al. (2016) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2016.09.002 · Cited by 106
Self-citationXu, H., Farag, A., & Pasini, D. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.05.059 · Cited by 101
Yin, L., Doyhamboure--Fouquet, J., Tian, X., & Li, D. (2017) · Composites Part B Engineering · doi:10.1016/j.compositesb.2017.09.003 · Cited by 98
Zhu, W., Yan, C., Shi, Y., et al. (2016) · Scientific Reports · doi:10.1038/srep33780 · Cited by 97
Density variation in binder jetting 3D-printed and sintered Ti-6Al-4V
Stevens, E. L., Schloder, S., Bono, E., Schmidt, D., & Chmielus, M. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.06.017 · Cited by 97
Chowdhury, S., & Anand, S. (2016) · doi:10.1115/msec2016-8784 · Cited by 96
High-precision three-dimensional inkjet technology for live cell bioprinting
Takagi, D., Lin, W., Matsumoto, T., Yaginuma, H., Hemmi, N., Hatada, S., & Seo, M. (2019) · International Journal of Bioprinting · doi:10.18063/ijb.v5i2.208 · Cited by 96
Two-scale topology optimization with microstructures
Zhu, B., Skouras, M., Chen, D., & Matusik, W. (2017) · ACM Transactions on Graphics · doi:10.1145/3072959.3126835 · Cited by 94
Shen, F., Yuan, S., Guo, Y., Zhao, B. Y., Bai, J., Qwamizadeh, M., Chua, C. K., Wei, J., & Zhou, K. (2016) · International Journal of Applied Mechanics · doi:10.1142/s1758825116400068 · Cited by 92
Self-citationTopology optimization and 3D printing of multimaterial magnetic actuators and displays
Sundaram, S., Skouras, M., Kim, D. S., van den Heuvel, L., & Matusik, W. (2019) · Science Advances · doi:10.1126/sciadv.aaw1160 · Cited by 92
Chang, B., Li, X., Parandoush, P., Ruan, S., Shen, C., & Lin, D. L. (2020) · Polymer Testing · doi:10.1016/j.polymertesting.2020.106563 · Cited by 90
Boddeti, N., Tang, Y., Maute, K. K., Rosen, D. W., & Dunn, M. L. (2020) · Scientific Reports · doi:10.1038/s41598-020-73333-4 · Cited by 90
Self-citationBio-inspired bimaterial composites patterned using three-dimensional printing
Ko, K., Jin, S., Lee, S. E., Lee, I., & Hong, J. (2019) · Composites Part B Engineering · doi:10.1016/j.compositesb.2019.02.008 · Cited by 88
Yang, S. L., Page, T., Zhang, Y., & Zhao, Y. F. (2020) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-020-01545-6 · Cited by 83
Kim, J. S., Lee, C. S., Kim, S., & Lee, S. W. (2018) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-018-0051-4 · Cited by 78
Topology optimization method with elimination of enclosed voids
Lü, Z., & Zhang, W. (2019) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-019-02204-y · Cited by 77
Digital manufacture of shape changing components
Yu, K., Dunn, M. L., & Qi, H. J. (2015) · Extreme Mechanics Letters · doi:10.1016/j.eml.2015.07.005 · Cited by 76
Baino, F., & Fiume, E. (2020) · Materials · doi:10.3390/ma13071688 · Cited by 75
EyeOpener: Editing Eyes in the Wild
Shu, Z., Shechtman, E., Samaras, D., & Hadap, S. (2016) · ACM Transactions on Graphics · doi:10.1145/2926713 · Cited by 73
Garland, A., White, B. C., Jared, B. H., Heiden, M., Donahue, E., & Boyce, B. L. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101217 · Cited by 71
Goh, G. D., Dikshit, V., An, J., & Yeong, W. Y. (2020) · Mechanics of Advanced Materials and Structures · doi:10.1080/15376494.2020.1821266 · Cited by 69
Powder bed binder jetting additive manufacturing of silicone structures
Liravi, F., & Vlasea, M. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.02.017 · Cited by 64
Development of composite springs using 4D printing method
Hoa, S. V. (2018) · Composite Structures · doi:10.1016/j.compstruct.2018.12.003 · Cited by 64
Contactless reversible 4D-printing for 3D-to-3D shape morphing
Lee, A. Y., Zhou, A., An, J., Chua, C. K., & Zhang, Y. (2020) · Virtual and Physical Prototyping · doi:10.1080/17452759.2020.1822189 · Cited by 64
Dickson, A. N., & Dowling, D. P. (2019) · Composite Structures · doi:10.1016/j.compstruct.2019.01.050 · Cited by 63
Stereolithographic 3D printing of extrinsically self-healing composites
Sanders, P., Young, A. J., Qin, Y., Fancey, K. S., Reithofer, M. R., Guillet‐Nicolas, R., Kleitz, F., Pamme, N., & Chin, J. M. (2019) · Scientific Reports · doi:10.1038/s41598-018-36828-9 · Cited by 62
Roy, M., Tran, P., Dickens, T. J., & Schrand, A. M. (2019) · Journal of Composites Science · doi:10.3390/jcs4010001 · Cited by 61
Gu, G. X., Wettermark, S. D., & Buehler, M. J. (2017) · Additive manufacturing · doi:10.1016/j.addma.2017.07.002 · Cited by 59
Safari, M., Múgica, A., Zubitur, M., de Ilarduya, A. M., Muñoz‐Guerra, S., & Müller, A. J. (2019) · Polymers · doi:10.3390/polym12010017 · Cited by 51
Characterization of Creeping and Shape Memory Effect in Laser Sintered Thermoplastic Polyurethane
Yuan, S., Bai, J., Chua, C. K., Zhou, K., & Wei, J. (2016) · Journal of Computing and Information Science in Engineering · doi:10.1115/1.4034032 · Cited by 50
Self-citationMirkhalaf, M., & Zreiqat, H. (2020) · JOM · doi:10.1007/s11837-019-03986-8 · Cited by 45
Intelligent optimization system for powder bed fusion of processable thermoplastics
Yuan, S., Li, J., Yao, X., Zhu, J., Gu, X., Gao, T., Xu, Y., & Zhang, W. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101182 · Cited by 42
Self-citationChen, H., & Zhao, Y. F. (2015) · ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (IDETC/CIE) · doi:10.1115/detc2015-47627 · Cited by 39
An Industry 4.0 Approach to the 3D Printing of Composite Materials
Fox, B. L., & Subic, A. (2019) · Engineering · doi:10.1016/j.eng.2019.06.003 · Cited by 32
Li, S., Yuan, S., Zhu, J., Zhang, W., Zhang, H., & Li, J. (2021) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-021-02856-9 · Cited by 28
Self-citationMultiscale optimal design and fabrication of laminated composites
Boddeti, N., Rosen, D. W., Maute, K. K., & Dunn, M. L. (2019) · Composite Structures · doi:10.1016/j.compstruct.2019.111366 · Cited by 25
3D PRINTING TO INTEGRATE ACTUATORS INTO COMPOSITES
Bodkhe, S., Vigo, L., Zhu, S., Testoni, O., Aegerter, N., & Ermanni, P. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101290 · Cited by 25
Ultrasonic non-destructive evaluation of selectively laser-sintered polymeric nanocomposites
Yuan, S., & Yu, X. (2020) · Polymer Testing · doi:10.1016/j.polymertesting.2020.106705 · Cited by 21
Self-citationBifunctional superlens for simultaneous flexural and acoustic wave superfocusing
Zhu, Y., Cao, L., Merkel, A., et al. (2020) · Applied Physics Letters · doi:10.1063/5.0004428 · Cited by 20
Barrrionuevo, G. O., & Ramos-Grez, J. A. (2020) · Communications in computer and information science · doi:10.1007/978-3-030-42520-3_10 · Cited by 18
A facile photo-polymerization method for reconfigurable shape memory polymers
Hao, B., Li, Y., Xiao, X., Dai, W., Chen, H., & Chen, S. (2019) · Materials Letters · doi:10.1016/j.matlet.2019.07.071 · Cited by 15
3D Printed Actuators: Reversibility, Relaxation, and Ratcheting
Zhao, S., Maas, M., Jansen, K. M. B., & van Hecke, M. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201905545 · Cited by 15
3D printed actuators: reversibility, relaxation and ratcheting
Zhao, S., Maas, M., Jansen, K. M. B., & Hecke, M. L. V. (2019) · Leiden Repository (Leiden University) · Cited by 4
Cited by
Wang, W., Zhang, B., Li, M., Li, J., Zhang, C., Han, Y., Wang, L., Wang, K., Zhou, C., Liu, L., et al. (2021) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2021.109192 · Cited by 369
Khalid, M. Y., Arif, Z. U., Noroozi, R., Zolfagharian, A., & Bodaghi, M. (2022) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2022.07.035 · Cited by 336
Advances in 3D/4D printing of mechanical metamaterials: From manufacturing to applications
Zhou, X., Ren, L., Song, Z., Li, G., Zhang, J., Li, B., Wu, Q., Li, W., Ren, L., & Liu, Q. (2023) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2023.110585 · Cited by 277
Metadata
- Authors
- Yuan, S., Li, S., Zhu, J., & Tang, Y.
- Venue
- Composites Part B: Engineering
- Publisher
- Elsevier BV
- Published
- 2021-08
- Volume
- 219
- Pages
- 108903
- ISSN
- 1359-8368 (ISSN-L)
- OpenAlex
- W3158469175
- Cited by
- 267
- References
- 166
- FWCI
- 13.47
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.