The DOI matches its Crossref record; 173 of the 173 references it cites were found in a registry or an index.
Review on design and structural optimisation in additive manufacturing: Towards next-generation lightweight structures
Open accessAbstract
As the application of additive manufacturing (AM) reaches an unprecedented scale in both academia and industry, a reflection upon the state-of-the-art developments in the design for additive manufacturing (DfAM) and structural optimisation, becomes vital for successfully shaping the future AM-landscape. A framework, highlighting both the interdependencies between these two central aspects in AM and the necessity for a holistic approach to structural optimization, using lightweight strategies such as topology optimization and/or latticing, was established to summarize the reviewed content. Primarily focusing on isotropic material considerations and basic stiffness-optimal problems, these concepts have already found wide application, bridging the gaps between design and manufacturing as well as academia and industry. In pursuit of streamlining the AM-workflow towards digitally print-ready designs, studies are increasingly investigating mathematically-based structural optimization approaches in conjunction with DfAM-specific constraints, providing a portfolio of solutions like generative design, which is gaining traction in industry. Besides an overview on economically-driven to performance-driven design optimizations, insight into commercial AM-specific software is provided, elucidating potentials and challenges for the community. Despite the abundance of AM design methods to-date, computationally inexpensive solutions for common engineering problems are still scarce, which is constituting one of many key challenges for the future.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Fronts propagating with curvature-dependent speed: Algorithms based on Hamilton-Jacobi formulations
Osher, S., & Sethian, J. A. (1988) · Journal of Computational Physics · doi:10.1016/0021-9991(88)90002-2 · Cited by 14,062
Cellular solids structure and properties
Gibson, L. J., Ashby, M. F., et al. (1997) · Cited by 9,172
Additive manufacturing of metallic components – Process, structure and properties
DebRoy, T., Wei, H. L., Zuback, J. S., Mukherjee, T., Elmer, J. W., Milewski, J. O., Beese, A. M., Wilson-Heid, A., De, A., & Zhang, W. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.10.001 · Cited by 8,805
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. Q., & Hui, D. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.02.012 · Cited by 8,431
Generating optimal topologies in structural design using a homogenization method
Bendsøe, M. P., & Kikuchi, N. (1988) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/0045-7825(88)90086-2 · Cited by 7,467
Cellular solids: Structure and properties
Wolcott, M. P. (1990) · Materials Science and Engineering: A · doi:10.1016/0921-5093(90)90295-e · Cited by 5,926
A variational approach to the theory of the elastic behaviour of multiphase materials
Hashin, Z., & Shtrikman, S. (1963) · Journal of the Mechanics and Physics of Solids · doi:10.1016/0022-5096(63)90060-7 · Cited by 5,882
Optimal shape design as a material distribution problem
Bendsøe, M. P. (1989) · Structural Optimization · doi:10.1007/bf01650949 · Cited by 4,521
Polymers for 3D Printing and Customized Additive Manufacturing
Ligon, S. C., Liska, R., Stampfl, J., Gurr, M., & Mülhaupt, R. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00074 · Cited by 3,741
3D printing of polymer matrix composites: A review and prospective
Wang, X., Jiang, M., Zhou, Z., Gou, J., & Hui, D. (2017) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2016.11.034 · Cited by 3,325
A level set method for structural topology optimization
Wang, M. Y., Wang, X., & Guo, D. (2003) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/s0045-7825(02)00559-5 · Cited by 3,232
Topology optimization approaches: A comparative review
Sigmund, O., & Maute, K. (2013) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-013-0978-6 · Cited by 2,890
A simple evolutionary procedure for structural optimization
Xie, Y. M., & Steven, G. P. (1993) · Computers & Structures · doi:10.1016/0045-7949(93)90035-c · Cited by 2,707
A 99 line topology optimization code written in Matlab
Sigmund, O. (2001) · Structural and Multidisciplinary Optimization · doi:10.1007/s001580050176 · Cited by 2,688
The status, challenges, and future of additive manufacturing in engineering
Gao, W., Zhang, Y., Ramanujan, D., Ramani, K., Chen, Y., Williams, C. B., Wang, C. C. L., Shin, Y. C., Zhang, S., & Zavattieri, P. D. (2015) · Computer-Aided Design · doi:10.1016/j.cad.2015.04.001 · Cited by 2,631
Additive manufacturing: technology, applications and research needs
Guo, N., & Leu, M. C. (2013) · Frontiers of Mechanical Engineering · doi:10.1007/s11465-013-0248-8 · Cited by 2,073
Design for Additive Manufacturing: Trends, opportunities, considerations, and constraints
Thompson, M. K., Moroni, G., Vaneker, T., Fadel, G., Campbell, R. I., Gibson, I., Bernard, A., Schulz, J., Graf, P., Ahuja, B., et al. (2016) · CIRP Annals · doi:10.1016/j.cirp.2016.05.004 · Cited by 2,017
The rise of 3-D printing: The advantages of additive manufacturing over traditional manufacturing
Attaran, M. (2017) · Business Horizons · doi:10.1016/j.bushor.2017.05.011 · Cited by 1,822
Ultralight Metallic Microlattices
Schaedler, T. A., Jacobsen, A. J., Torrents, A., Sorensen, A. E., Lian, J., Greer, J. R., Valdevit, L., & Carter, W. B. (2011) · Science · doi:10.1126/science.1211649 · Cited by 1,784
Bendsøe, M. P., & Sigmund, O. (2004) · Springer eBooks · doi:10.1007/978-3-662-05086-6 · Cited by 1,727
Metal Additive Manufacturing: A Review of Mechanical Properties
Lewandowski, J. J., & Seifi, M. (2016) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070115-032024 · Cited by 1,722
Efficient topology optimization in MATLAB using 88 lines of code
Andreassen, E., Clausen, A., Schevenels, M., Lazarov, B. S., & Sigmund, O. (2010) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-010-0594-7 · Cited by 1,710
3D‐Printing of Lightweight Cellular Composites
Compton, B. G., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201401804 · Cited by 1,626
Mohamed, O. A., Masood, S. H., & Bhowmik, J. L. (2015) · Advances in Manufacturing · doi:10.1007/s40436-014-0097-7 · Cited by 1,481
Topology optimization of non-linear elastic structures and compliant mechanisms
Bruns, T. E., & Tortorelli, D. A. (2001) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/s0045-7825(00)00278-4 · Cited by 1,385
Svanberg, K. (2002) · SIAM Journal on Optimization · doi:10.1137/s1052623499362822 · Cited by 1,371
Structural Boundary Design via Level Set and Immersed Interface Methods
Sethian, J. A., & Wiegmann, A. (2000) · Journal of Computational Physics · doi:10.1006/jcph.2000.6581 · Cited by 1,299
Tymrak, B. M., Kreiger, M., & Pearce, J. M. (2014) · Materials & Design · doi:10.1016/j.matdes.2014.02.038 · Cited by 1,244
Materials for additive manufacturing
Bourell, D., Kruth, J. P., Leu, M., Levy, G., Rosen, D., Beese, A. M., & Clare, A. (2017) · CIRP Annals · doi:10.1016/j.cirp.2017.05.009 · Cited by 1,034
Level-set methods for structural topology optimization: a review
van Dijk, N. P., Maute, K., Langelaar, M., & van Keulen, F. (2013) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-013-0912-y · Cited by 1,008
The Role of Additive Manufacturing in the Era of Industry 4.0
Dilberoglu, U. M., Gharehpapagh, B., Yaman, U., & Dolen, M. (2017) · Procedia Manufacturing · doi:10.1016/j.promfg.2017.07.148 · Cited by 1,000
Micro-architectured materials: past, present and future
Fleck, N. A., Deshpande, V. S., & Ashby, M. F. (2010) · Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rspa.2010.0215 · Cited by 982
Topology Optimization in Aircraft and Aerospace Structures Design
Zhu, J.-H., Zhang, W.-H., & Xia, L. (2016) · Archives of Computational Methods in Engineering · doi:10.1007/s11831-015-9151-2 · Cited by 980
Mechanical metamaterials at the theoretical limit of isotropic elastic stiffness
Berger, J. B., Wadley, H. N. G., & McMeeking, R. M. (2017) · Nature · doi:10.1038/nature21075 · Cited by 914
Current and future trends in topology optimization for additive manufacturing
Liu, J., Gaynor, A. T., Chen, S., Kang, Z., Suresh, K., Takezawa, A., Li, L., Kato, J., Tang, J., Wang, C. C. L., et al. (2018) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-018-1994-3 · Cited by 870
Tancogne-Dejean, T., Spierings, A. B., & Mohr, D. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.05.054 · Cited by 806
Zhang, L., Feih, S., Daynes, S., Chang, S., Wang, M. Y., Wei, J., & Lu, W. F. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.08.007 · Cited by 780
Giga-voxel computational morphogenesis for structural design
Aage, N., Andreassen, E., Lazarov, B. S., & Sigmund, O. (2017) · Nature · doi:10.1038/nature23911 · Cited by 772
Maskery, I., Sturm, L., Aremu, A. O., Panesar, A., Williams, C. B., Tuck, C. J., Wildman, R. D., Ashcroft, I. A., & Hague, R. J. M. (2018) · Polymer · doi:10.1016/j.polymer.2017.11.049 · Cited by 728
Self-citationA Review of 3D Printing Technology for Medical Applications
Yan, Q., Dong, H., Su, J., Han, J., Song, B., Wei, Q., & Shi, Y. (2018) · Engineering · doi:10.1016/j.eng.2018.07.021 · Cited by 720
(2013) · Medical Entomology and Zoology · Cited by 690
A level-set method for shape optimization
Allaire, G., Jouve, F., & Toader, A.-M. (2002) · Comptes Rendus. Mathématique · doi:10.1016/s1631-073x(02)02412-3 · Cited by 650
An efficient 3D topology optimization code written in Matlab
Liu, K., & Tovar, A. (2014) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-014-1107-x · Cited by 649
3D printing in aerospace and its long-term sustainability
Joshi, S. C., & Sheikh, A. A. (2015) · Virtual and Physical Prototyping · doi:10.1080/17452759.2015.1111519 · Cited by 628
Additive manufacturing of 3D nano-architected metals
Vyatskikh, A., Delalande, S., Kudo, A., Zhang, X., Portela, C. M., & Greer, J. R. (2018) · Nature Communications · doi:10.1038/s41467-018-03071-9 · Cited by 593
Nanolattices: An Emerging Class of Mechanical Metamaterials
Bauer, J., Meza, L. R., Schaedler, T. A., Schwaiger, R., Zheng, X., & Valdevit, L. (2017) · Advanced Materials · doi:10.1002/adma.201701850 · Cited by 592
Infill Optimization for Additive Manufacturing—Approaching Bone-Like Porous Structures
Wu, J., Aage, N., Westermann, R., & Sigmund, O. (2017) · IEEE Transactions on Visualization and Computer Graphics · doi:10.1109/tvcg.2017.2655523 · Cited by 572
Stiffness design of geometrically nonlinear structures using topology optimization
Buhl, T., Pedersen, C. B. W., & Sigmund, O. (2000) · Structural and Multidisciplinary Optimization · doi:10.1007/s001580050089 · Cited by 570
Evolutionary Topology Optimization of Continuum Structures
Huang, X., & Xie, Y. M. (2010) · Wiley eBooks · doi:10.1002/9780470689486 · Cited by 553
Yang, Y., Song, X., Li, X., Chen, Z., Zhou, C., Zhou, Q., & Chen, Y. (2018) · Advanced Materials · doi:10.1002/adma.201706539 · Cited by 538
Tancogne‐Dejean, T., Diamantopoulou, M., Gorji, M. B., Bonatti, C., & Mohr, D. (2018) · Advanced Materials · doi:10.1002/adma.201803334 · Cited by 506
Cellular Materials in Nature and Medicine
Gibson, L. J., Ashby, M. F., & Harley, B. A. C. (2010) · Cited by 490
Panesar, A., Abdi, M., Hickman, D., & Ashcroft, I. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2017.11.008 · Cited by 489
Self-citationCalignano, F. (2014) · Materials & Design · doi:10.1016/j.matdes.2014.07.043 · Cited by 486
Jiang, R., Kleer, R., & Piller, F. T. (2017) · Technological Forecasting and Social Change · doi:10.1016/j.techfore.2017.01.006 · Cited by 480
Gaynor, A. T., & Guest, J. K. (2016) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-016-1551-x · Cited by 476
Design guidelines for laser additive manufacturing of lightweight structures in TiAl6V4
Kranz, J., Herzog, D., & Emmelmann, C. (2015) · Journal of Laser Applications · doi:10.2351/1.4885235 · Cited by 470
Topology synthesis of large‐displacement compliant mechanisms
Pedersen, C., Buhl, T., & Sigmund, O. (2001) · International Journal for Numerical Methods in Engineering · doi:10.1002/nme.148 · Cited by 470
Design and 3D Printing of Scaffolds and Tissues
An, J., Teoh, J. E. M., Suntornnond, R., & Chua, C. K. (2015) · Engineering · doi:10.15302/j-eng-2015061 · Cited by 461
Bridging topology optimization and additive manufacturing
Zegard, T., & Paulino, G. H. (2016) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-015-1274-4 · Cited by 457
Advanced lattice support structures for metal additive manufacturing
Hussein, A., Hao, L., Yan, C., Everson, R., & Young, P. (2013) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2013.01.020 · Cited by 454
Beautiful and Functional: A Review of Biomimetic Design in Additive Manufacturing
du Plessis, A., Broeckhoven, C., Yadroitsava, I., Yadroitsev, I., Hands, C. H., Kunju, R., & Bhate, D. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2019.03.033 · Cited by 448
Maskery, I., Aremu, A. O., Parry, L., Wildman, R. D., Tuck, C. J., & Ashcroft, I. A. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.05.058 · Cited by 441
Towards High‐Performance Bioinspired Composites
Studart, A. R. (2012) · Advanced Materials · doi:10.1002/adma.201201471 · Cited by 429
Additive manufacturing of biologically-inspired materials
Studart, A. R. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00836k · Cited by 415
Leary, M., Merli, L., Torti, F., Mazur, M., & Brandt, M. (2014) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2014.06.015 · Cited by 406
Topology optimization of 3D self-supporting structures for additive manufacturing
Langelaar, M. (2016) · Additive Manufacturing · doi:10.1016/j.addma.2016.06.010 · Cited by 405
Guo, X., Zhang, W., Zhang, J., & Yuan, J. (2016) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2016.07.018 · Cited by 391
A new approach to the design and optimisation of support structures in additive manufacturing
Strano, G., Hao, L., Everson, R. M., & Evans, K. E. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-012-4403-x · Cited by 389
Optimum structure with homogeneous optimum truss-like material
Liu, L., Yan, J., & Cheng, G. (2008) · Computers & Structures · doi:10.1016/j.compstruc.2007.04.030 · Cited by 383
Campbell, I., Diegel, O., Kowen, J., & Wohlers, T. T. (2018) · ResearchSpace (University of Auckland) · Cited by 377
Additive manufacturing-enabled design theory and methodology: a critical review
Yang, S., & Zhao, Y. F. (2015) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-015-6994-5 · Cited by 371
Design, analysis and manufacturing of lattice structures: an overview
Helou, M., & Kara, S. (2018) · International Journal of Computer Integrated Manufacturing · doi:10.1080/0951192x.2017.1407456 · Cited by 370
An additive manufacturing filter for topology optimization of print-ready designs
Langelaar, M. (2016) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-016-1522-2 · Cited by 365
Homogenization‐based topology optimization for high‐resolution manufacturable microstructures
Groen, J. P., & Sigmund, O. (2017) · International Journal for Numerical Methods in Engineering · doi:10.1002/nme.5575 · Cited by 364
Cranial reconstruction: 3D biomodel and custom-built implant created using additive manufacturing
Jardini, A. L., Larosa, M. A., Filho, R. M., Zavaglia, C. A. D. C., Bernardes, L. F., Lambert, C. S., Calderoni, D. R., & Kharmandayan, P. (2014) · Journal of Cranio-Maxillofacial Surgery · doi:10.1016/j.jcms.2014.07.006 · Cited by 350
Topology Optimization for Additive Manufacturing
Brackett, D., Ashcroft, I., & Hague, R. (2011) · doi:10.26153/tsw/15300 · Cited by 347
Xia, L., & Breitkopf, P. (2014) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2014.05.022 · Cited by 339
An investigation into reinforced and functionally graded lattice structures
Maskery, I., Hussey, A., Panesar, A., Aremu, A., Tuck, C., Ashcroft, I., & Hague, R. (2017) · Journal of Cellular Plastics · doi:10.1177/0021955x16639035 · Cited by 339
Self-citationMahmoud, D., & Elbestawi, M. (2017) · Journal of Manufacturing and Materials Processing · doi:10.3390/jmmp1020013 · Cited by 338
A Survey of Modeling of Lattice Structures Fabricated by Additive Manufacturing
Dong, G., Tang, Y., & Zhao, Y. F. (2017) · Journal of Mechanical Design · doi:10.1115/1.4037305 · Cited by 337
Research on the fabricating quality optimization of the overhanging surface in SLM process
Wang, D., Yang, Y., Yi, Z., & Su, X. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-012-4271-4 · Cited by 330
Support structure constrained topology optimization for additive manufacturing
Mirzendehdel, A. M., & Suresh, K. (2016) · Computer-Aided Design · doi:10.1016/j.cad.2016.08.006 · Cited by 318
Kellens, K., Baumers, M., Gutowski, T. G., Flanagan, W., Lifset, R., & Duflou, J. R. (2017) · Journal of Industrial Ecology · doi:10.1111/jiec.12629 · Cited by 310
Self-supporting structure design in additive manufacturing through explicit topology optimization
Guo, X., Zhou, J., Zhang, W., Du, Z., Liu, C., & Liu, Y. (2017) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2017.05.003 · Cited by 309
Cheng, L., Bai, J., & To, A. C. (2019) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2018.10.010 · Cited by 306
Omar, O. M., MOHAMED, M., SyedH., Masood, ., & Bhowmik (2015) · Acta Scientiarum Naturalium Universitatis Sunyatseni · Cited by 302
Explicit three dimensional topology optimization via Moving Morphable Void (MMV) approach
Zhang, W., Chen, J., Zhu, X., Zhou, J., Xue, D., Lei, X., & Guo, X. (2017) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2017.05.002 · Cited by 282
Qian, X. (2017) · International Journal for Numerical Methods in Engineering · doi:10.1002/nme.5461 · Cited by 278
Bonatti, C., & Mohr, D. (2017) · International Journal of Plasticity · doi:10.1016/j.ijplas.2017.02.003 · Cited by 275
Gaynor, A. T., Meisel, N. A., Williams, C. B., & Guest, J. K. (2014) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4028439 · Cited by 271
Clever Support: Efficient Support Structure Generation for Digital Fabrication
Vanek, J., Galicia, J. A. G., & Benes, B. (2014) · Computer Graphics Forum · doi:10.1111/cgf.12437 · Cited by 268
Multiscale isogeometric topology optimization for lattice materials
Wang, Y., Xu, H., & Pasini, D. (2016) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2016.08.015 · Cited by 250
Zhang, P., Toman, J., Yu, Y., Biyikli, E., Kırca, M., Chmielus, M., & To, A. C. (2014) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4028724 · Cited by 248
Isogeometric topology optimization using trimmed spline surfaces
Seo, Y.-D., Kim, H.-J., & Youn, S. (2010) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2010.06.033 · Cited by 247
Additive Manufacturing as a Method to Design and Optimize Bioinspired Structures
Velasco‐Hogan, A., Xu, J., & Meyers, M. A. (2018) · Advanced Materials · doi:10.1002/adma.201800940 · Cited by 247
Exploiting Additive Manufacturing Infill in Topology Optimization for Improved Buckling Load
Clausen, A., Aage, N., & Sigmund, O. (2016) · Engineering · doi:10.1016/j.eng.2016.02.006 · Cited by 243
Cheng, L., Zhang, P., Biyikli, E., Bai, J., Robbins, J., & To, A. (2017) · Rapid Prototyping Journal · doi:10.1108/rpj-04-2016-0069 · Cited by 229
Laser Additive Manufacturing and Bionics: Redefining Lightweight Design
Emmelmann, C., Sander, P., Kranz, J., & Wycisk, E. (2011) · Physics Procedia · doi:10.1016/j.phpro.2011.03.046 · Cited by 222
Minimum compliance topology optimization of shell–infill composites for additive manufacturing
Wu, J., Clausen, A., & Sigmund, O. (2017) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2017.08.018 · Cited by 215
Structural optimization under overhang constraints imposed by additive manufacturing technologies
Allaire, G., Dapogny, C., Estevez, R., Faure, A., & Michailidis, G. (2017) · Journal of Computational Physics · doi:10.1016/j.jcp.2017.09.041 · Cited by 212
Tang, Y., Kurtz, A., & Zhao, Y. F. (2015) · Computer-Aided Design · doi:10.1016/j.cad.2015.06.001 · Cited by 198
A survey of the design methods for additive manufacturing to improve functional performance
Tang, Y., & Zhao, Y. F. (2016) · Rapid Prototyping Journal · doi:10.1108/rpj-01-2015-0011 · Cited by 193
Arabnejad Khanoki, S., & Pasini, D. (2012) · Journal of Biomechanical Engineering · doi:10.1115/1.4006115 · Cited by 192
A new methodological framework for design for additive manufacturing
Kumke, M., Watschke, H., & Vietor, T. (2016) · Virtual and Physical Prototyping · doi:10.1080/17452759.2016.1139377 · Cited by 192
Topology optimization of microstructures of cellular materials and composites for macrostructures
Huang, X., Zhou, S., Xie, Y. M., & Li, Q. (2012) · Computational Materials Science · doi:10.1016/j.commatsci.2012.09.018 · Cited by 190
Maskery, I., Aremu, A., Simonelli, M., Tuck, C. J., Wildman, R. D., Ashcroft, I., & Hague, R. (2015) · Experimental Mechanics · doi:10.1007/s11340-015-0021-5 · Cited by 185
Xia, L., & Breitkopf, P. (2015) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2014.12.018 · Cited by 185
Ultra-strong architected Cu meso-lattices
Wendy Gu, X., & Greer, J. R. (2015) · Extreme Mechanics Letters · doi:10.1016/j.eml.2015.01.006 · Cited by 182
Impact Mechanics and High-Energy Absorbing Materials: Review
Qiao, P., Yang, M., & Bobaru, F. (2008) · Journal of Aerospace Engineering · doi:10.1061/(asce)0893-1321(2008)21:4(235 · Cited by 182
Lattice Structure Design and Optimization With Additive Manufacturing Constraints
Tang, Y., Dong, G., Zhou, Q., & Zhao, Y. F. (2017) · IEEE Transactions on Automation Science and Engineering · doi:10.1109/tase.2017.2685643 · Cited by 182
Bhate, D., Penick, C. A., Ferry, L. A., & Lee, C. (2019) · Designs · doi:10.3390/designs3010019 · Cited by 178
Optimisation of functionally graded lattice structures using isostatic lines
Daynes, S., Feih, S., Lu, W. F., & Wei, J. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.04.082 · Cited by 177
Two-Scale Topology Optimization with Microstructures
Zhu, B., Skouras, M., Chen, D., & Matusik, W. (2017) · ACM Transactions on Graphics · doi:10.1145/3072959.3095815 · Cited by 172
The trends and challenges of fiber reinforced additive manufacturing
Fidan, I., Imeri, A., Gupta, A., Hasanov, S., Nasirov, A., Elliott, A., Alifui-Segbaya, F., & Nanami, N. (2019) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-018-03269-7 · Cited by 170
Zhang, P., Liu, J., & To, A. C. (2016) · Scripta Materialia · doi:10.1016/j.scriptamat.2016.10.021 · Cited by 168
Concurrent topology optimization of structures and their composite microstructures
Yan, X., Huang, X., Zha, Y., & Xie, Y. M. (2014) · Computers & Structures · doi:10.1016/j.compstruc.2013.12.001 · Cited by 163
Numerical comparison of lattice unit cell designs for medical implants by additive manufacturing
du Plessis, A., Yadroitsava, I., Yadroitsev, I., le Roux, S., & Blaine, D. (2018) · Virtual and Physical Prototyping · doi:10.1080/17452759.2018.1491713 · Cited by 160
Liu, C., Du, Z., Zhang, W., Zhu, Y., & Guo, X. (2017) · Journal of Applied Mechanics · doi:10.1115/1.4036941 · Cited by 158
Design and Analysis of Lattice Structures for Additive Manufacturing
Beyer, C., & Figueroa, D. (2016) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4033957 · Cited by 150
Thermography for Monitoring the Selective Laser Melting Process
Krauss, H., Eschey, C., & Zaeh, M. F. (2012) · doi:10.26153/tsw/15406 · Cited by 149
A 199-line Matlab code for Pareto-optimal tracing in topology optimization
Suresh, K. (2010) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-010-0534-6 · Cited by 143
Cheng, L., Liu, J., Liang, X. Y., & To, A. C. (2018) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2017.12.024 · Cited by 141
Luo, Y., Wang, M. Y., & Kang, Z. (2014) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2014.12.023 · Cited by 140
Zhang, W., Li, D., Zhang, J., & Guo, X. (2016) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2016.08.022 · Cited by 137
Optimal and Manufacturable Two-dimensional, Kagomé-like Cellular Solids
Hyun, S., & Salvatore Torquato, A. (2002) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2002.0021 · Cited by 135
Liu, J., & To, A. C. (2017) · Computer-Aided Design · doi:10.1016/j.cad.2017.05.003 · Cited by 135
Mineral Nano‐Interconnectivity Stiffens and Toughens Nacre‐like Composite Materials
Grossman, M., Bouville, F., Erni, F., Masania, K., Libanori, R., & Studart, A. R. (2016) · Advanced Materials · doi:10.1002/adma.201605039 · Cited by 128
Topology optimization of self-supporting structures with polygon features for additive manufacturing
Zhang, W., & Lü, Z. (2018) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2018.01.037 · Cited by 128
Jiang, J., Stringer, J., Xu, X. W., & Zhong, R. Y. (2018) · International Journal of Computer Integrated Manufacturing · doi:10.1080/0951192x.2018.1466398 · Cited by 120
Design of truss-like cellular structures using relative density mapping method
Alzahrani, M. A., Choi, S.-K., & Rosen, D. W. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.06.180 · Cited by 119
Topology Optimization for Additive Manufacturing: Considering Maximum Overhang Constraint
Gaynor, A. T., Meisel, N. A., Williams, C. B., & Guest, J. K. (2014) · AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference (MAO) · doi:10.2514/6.2014-2036 · Cited by 118
A Hybrid Geometric Modeling Method for Large Scale Conformal Cellular Structures
Wang, H., Chen, Y., & Rosen, D. W. (2005) · ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (IDETC/CIE) · doi:10.1115/detc2005-85366 · Cited by 117
A case study on topology optimized design for additive manufacturing
Gebisa, A. W., & Lemu, H. G. (2017) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/276/1/012026 · Cited by 116
Concurrent deposition path planning and structural topology optimization for additive manufacturing
Liu, J., & Yu, H. (2017) · Rapid Prototyping Journal · doi:10.1108/rpj-05-2016-0087 · Cited by 113
A new methodological framework for design for additive manufacturing*
Kumke, M., Watschke, H., & Vietor, T. (2017) · CRC Press eBooks · doi:10.1201/9781315119106-12 · Cited by 111
Liu, S., Li, Q., Liu, J., Chen, W., & Zhang, Y. (2018) · Engineering · doi:10.1016/j.eng.2017.09.002 · Cited by 110
Robbins, J., Owen, S. J., Clark, B. W., & Voth, T. E. (2016) · Additive manufacturing · doi:10.1016/j.addma.2016.06.013 · Cited by 108
Xia, Q., & Shi, T. (2015) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2015.07.015 · Cited by 106
Dissolvable Metal Supports for 3D Direct Metal Printing
Hildreth, O. J., Nassar, A. R., Chasse, K. R., & Simpson, T. W. (2016) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2016.0013 · Cited by 103
Support structure design in additive manufacturing based on topology optimization
Kuo, Y.-H., Cheng, C.-C., Lin, Y., & San, C.-H. (2017) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-017-1743-z · Cited by 103
Contact-Free Support Structures for Part Overhangs in Powder-Bed Metal Additive Manufacturing
Cooper, K. G., Steele, P., Cheng, B., & Chou, K. (2017) · Inventions · doi:10.3390/inventions3010002 · Cited by 103
Cheng, L., Liang, X. Y., Belski, E., Wang, X., Sietins, J. M., Ludwick, S., & To, A. C. (2018) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4040622 · Cited by 101
Narrow-band topology optimization on a sparsely populated grid
Liu, H., Hu, Y., Zhu, B., Matusik, W., & Sifakis, E. D. (2018) · ACM Transactions on Graphics · doi:10.1145/3272127.3275012 · Cited by 101
Dapogny, C., Estevez, R., Faure, A., & Michailidis, G. (2018) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2018.09.036 · Cited by 98
Two-scale topology optimization with microstructures
Zhu, B., Skouras, M., Chen, D., & Matusik, W. (2017) · ACM Transactions on Graphics · doi:10.1145/3072959.3126835 · Cited by 94
Cahill, S., Lohfeld, S., & McHugh, P. E. (2009) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-009-3693-5 · Cited by 93
Orme, M. E., Gschweitl, M., Ferrari, M., Madera, I., & Mouriaux, F. (2017) · Journal of Mechanical Design · doi:10.1115/1.4037304 · Cited by 92
Mass, Y., & Amir, O. (2017) · Additive manufacturing · doi:10.1016/j.addma.2017.08.001 · Cited by 88
3D level-set topology optimization: a machining feature-based approach
Liu, J., & Ma, Y. (2015) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-015-1263-7 · Cited by 80
Panesar, A. S., Ashcroft, I., Brackett, D., Wildman, R. D., & Hague, R. (2017) · Additive manufacturing · doi:10.1016/j.addma.2017.05.009 · Cited by 73
Self-citationGÖRGÜLÜARSLAN, R. M., Gandhi, U. N., Song, Y., & Choi, S.-K. (2017) · Rapid Prototyping Journal · doi:10.1108/rpj-10-2015-0139 · Cited by 69
Takezawa, A., Koizumi, Y., & Kobashi, M. (2017) · Additive manufacturing · doi:10.1016/j.addma.2017.10.004 · Cited by 68
Geometric modeling of lattice structures for additive manufacturing
Savio, G., Meneghello, R., & Concheri, G. (2018) · Rapid Prototyping Journal · doi:10.1108/rpj-07-2016-0122 · Cited by 66
Concurrent topological design of composite structures and the underlying multi-phase materials
Da, D., Cui, X., Long, K., & Li, G. Y. (2016) · Computers & Structures · doi:10.1016/j.compstruc.2016.10.006 · Cited by 65
Long, K., Han, D., & Gu, X. (2017) · Computational Materials Science · doi:10.1016/j.commatsci.2016.12.013 · Cited by 61
Multifunctional Topology Design of Cellular Material Structures
Seepersad, C. C., Allen, J. K., McDowell, D. L., & Mistree, F. (2008) · Journal of Mechanical Design · doi:10.1115/1.2829876 · Cited by 58
Panesar, A. S., Brackett, D., Ashcroft, I., Wildman, R. D., & Hague, R. (2015) · Journal of Mechanical Design · doi:10.1115/1.4030996 · Cited by 53
Self-citationKoizumi, Y., Okazaki, A., Chiba, A., Kato, T., & Takezawa, A. (2016) · Additive manufacturing · doi:10.1016/j.addma.2016.06.001 · Cited by 53
An error diffusion based method to generate functionally graded cellular structures
Brackett, D. J., Ashcroft, I., Wildman, R. D., & Hague, R. (2014) · Computers & Structures · doi:10.1016/j.compstruc.2014.03.004 · Cited by 51
Design optimisation for an additively manufactured automotive component
Abdi, M., Ashcroft, I., & Wildman, R. D. (2017) · International Journal of Powertrains · doi:10.1504/ijpt.2018.090371 · Cited by 51
Shape optimization of a layer by layer mechanical constraint for additive manufacturing
Allaire, G., Dapogny, C., Faure, A., & Michailidis, G. (2017) · Comptes Rendus Mathématique · doi:10.1016/j.crma.2017.04.008 · Cited by 48
Conformal Lattice Structure Design and Fabrication
Nguyen, J., Park, S.-I., Rosen, D. W., Folgar, L., & Williams, J. R. (2012) · doi:10.26153/tsw/15339 · Cited by 48
Evolutionary topology optimization of continuum structures with a global displacement control
Zuo, Z. H., & Xie, Y. M. (2014) · Computer-Aided Design · doi:10.1016/j.cad.2014.06.007 · Cited by 46
Evolutionary topology optimization using the extended finite element method and isolines
Abdi, M., Wildman, R. D., & Ashcroft, I. (2013) · Engineering Optimization · doi:10.1080/0305215x.2013.791815 · Cited by 45
Design concepts for generating optimised lattice structures aligned with strain trajectories
Daynes, S., Feih, S., Lu, W. F., & Wei, J. (2019) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2019.05.053 · Cited by 40
Topology optimization with additive manufacturing consideration for vehicle load path development
Chuang, C., Chen, S., Yang, R., & Vogiatzis, P. (2017) · International Journal for Numerical Methods in Engineering · doi:10.1002/nme.5549 · Cited by 39
Explicit control of structural complexity in topology optimization
Zhang, W., Liu, Y., Wei, P., Zhu, Y., & Guo, X. (2017) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2017.05.026 · Cited by 37
Penalty regulation of overhang in topology optimization for additive manufacturing
Thore, C., Grundström, H. A., Torstenfelt, B., & Klarbring, A. (2019) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-019-02194-x · Cited by 37
Minimum void length scale control in level set topology optimization subject to machining radii
Liu, J., Yu, H., & Ma, Y. (2016) · Computer-Aided Design · doi:10.1016/j.cad.2016.09.007 · Cited by 32
Design Optimization of Irregular Cellular Structure for Additive Manufacturing
Song, G., Jing, S., Zhao, F.-L., Wang, Y., Xing, H., & Zhou, J. (2017) · Chinese Journal of Mechanical Engineering · doi:10.1007/s10033-017-0168-3 · Cited by 25
Static and Modal Topology Optimization of Turbomachinery Components
Rindi, A., Meli, E., Boccini, E., Iurisci, G., Corbò, S., & Falomi, S. (2016) · Journal of Engineering for Gas Turbines and Power · doi:10.1115/1.4033512 · Cited by 22
Design and Process Considerations for Effective Additive Manufacturing of Heat Exchangers
Handler, E., Sterling, A., Pegues, J., Özdeş, H., Masoomi, M., Shamsaei, N., & Thompson, S. M. (2017) · doi:10.26153/tsw/16981 · Cited by 4
Cited by
Material-structure-performance integrated laser-metal additive manufacturing
Gu, D., Shi, X., Poprawe, R., Bourell, D. L., Setchi, R., & Zhu, J. (2021) · Science · doi:10.1126/science.abg1487 · Cited by 1,703
A review of topology optimization for additive manufacturing: Status and challenges
ZHU, J., ZHOU, H., WANG, C., ZHOU, L., YUAN, S., & ZHANG, W. (2021) · Chinese Journal of Aeronautics · doi:10.1016/j.cja.2020.09.020 · Cited by 874
Benedetti, M., du Plessis, A., Ritchie, R. O., Dallago, M., Razavi, N., & Berto, F. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2021.100606 · Cited by 788
Topology optimization of multi-scale structures: a review
Wu, J., Sigmund, O., & Groen, J. P. (2021) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-021-02881-8 · Cited by 688
Properties and applications of additively manufactured metallic cellular materials: A review
du Plessis, A., Razavi, N., Benedetti, M., Murchio, S., Leary, M., Watson, M., Bhate, D., & Berto, F. (2022) · Progress in Materials Science · doi:10.1016/j.pmatsci.2021.100918 · Cited by 623
Metadata
- Authors
- Plocher, J., & Panesar, A.
- Venue
- Materials & Design
- Publisher
- Elsevier BV
- Published
- 2019-12
- Volume
- 183
- Pages
- 108164
- ISSN
- 0264-1275 (ISSN-L)
- OpenAlex
- W2970458529
- Cited by
- 669
- References
- 173
- FWCI
- 51.39
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.