The DOI matches its Crossref record; 124 of the 124 references it cites were found in a registry or an index.
Electrospraying of polymers with therapeutic molecules: State of the art
Open accessAbstract
The encapsulation and release of bioactive molecules from polymeric vehicles represents the holy grail of drug and growth factor delivery therapies, whereby sustained and controlled release is crucial in eliciting a positive therapeutic effect. To this end, electrospraying is rapidly emerging as a popular technology for the production of polymeric particles containing bioactive molecules. Compared with traditional emulsion fabrication techniques, electrospraying has the potential to reduce denaturation of protein drugs and affords tighter regulation over particle size distribution and morphology. In this article, we review the importance of the electrospraying parameters that enable reproducible tailoring of the particles’ physical and in vitro drug release characteristics, along with discussion of existing in vivo data. Controlled morphology and monodispersity of particles can be achieved with electrospraying, with high encapsulation efficiencies and without unfavorable denaturation of bioactive molecules throughout the process. Finally, the combination of electrospraying with electrospun scaffolds, with an emphasis on tissue regeneration is reviewed, depicting a technique in its relative infancy but holding great promise for the future of regenerative medicine.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
1 retracted
Anumolu, R., Gustafson, J. A., Magda, J. J., Cappello, J., Ghandehari, H., & Pease, L. F. (2011) · ACS Nano · doi:10.1021/nn103585f · Cited by 56
RetractedVMD: visual molecular dynamics
Humphrey, W., Dalke, A., & Schulten, K. (1996) · Journal of Molecular Graphics · doi:10.1016/0263-7855(96)00018-5 · Cited by 66,952
The return of a forgotten polymer—Polycaprolactone in the 21st century
Woodruff, M. A., & Hutmacher, D. W. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2010.04.002 · Cited by 4,033
Self-citationElectrospinning: Applications in drug delivery and tissue engineering
Sill, T. J., & von Recum, H. A. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2008.01.011 · Cited by 3,289
Electrospinning of Polymeric Nanofibers for Tissue Engineering Applications: A Review
Pham, Q. P., Sharma, U., & Mikos, A. G. (2006) · Tissue Engineering · doi:10.1089/ten.2006.12.1197 · Cited by 2,256
An Introduction to Electrospinning and Nanofibers
Ramakrishna, S., Fujihara, K., Teo, W.-E., Lim, T.-C., & Ma, Z. (2005) · WORLD SCIENTIFIC eBooks · doi:10.1142/5894 · Cited by 2,049
XX. On the equilibrium of liquid conducting masses charged with electricity
Rayleigh, L. (1882) · The London, Edinburgh, and Dublin Philosophical Magazine and Journal of Science · doi:10.1080/14786448208628425 · Cited by 1,825
Polymeric system for dual growth factor delivery
Richardson, T. P., Peters, M. C., Ennett, A. B., & Mooney, D. J. (2001) · Nature Biotechnology · doi:10.1038/nbt1101-1029 · Cited by 1,752
Complexity in biomaterials for tissue engineering
Place, E. S., Evans, N. D., & Stevens, M. M. (2009) · Nature Materials · doi:10.1038/nmat2441 · Cited by 1,728
Polymer microspheres for controlled drug release
Freiberg, S., & Zhu, X. X. (2004) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2004.04.013 · Cited by 1,336
Shenoy, S. L., Bates, W. D., Frisch, H. L., & Wnek, G. E. (2005) · Polymer · doi:10.1016/j.polymer.2005.03.011 · Cited by 1,209
Min, B.-M., Lee, G., Kim, S. H., Nam, Y. S., Lee, T. S., & Park, W. H. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2003.08.045 · Cited by 1,151
Electrospun silk-BMP-2 scaffolds for bone tissue engineering
Li, C., Vepari, C., Jin, H.-J., Kim, H. J., & Kaplan, D. L. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.01.022 · Cited by 1,140
Poly-ϵ-caprolactone microspheres and nanospheres: an overview
Sinha, V. R., Bansal, K., Kaushik, R., Kumria, R., & Trehan, A. (2004) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2004.01.044 · Cited by 1,100
Mundargi, R. C., Babu, V. R., Rangaswamy, V., Patel, P., & Aminabhavi, T. M. (2008) · Journal of Controlled Release · doi:10.1016/j.jconrel.2007.09.013 · Cited by 1,025
An Introduction to Electrospinning and Nanofibers
Ramakrishna, S., Fujihara, K., Teo, W. E., et al. (2005) · WORLD SCIENTIFIC eBooks · doi:10.1142/9789812567611 · Cited by 992
Electrospraying route to nanotechnology: An overview
Jaworek, A., & Sobczyk, A. T. (2008) · Journal of Electrostatics · doi:10.1016/j.elstat.2007.10.001 · Cited by 963
Freitas, S., Merkle, H. P., & Gander, B. (2005) · Journal of Controlled Release · doi:10.1016/j.jconrel.2004.10.015 · Cited by 923
The current emitted by highly conducting Taylor cones
De La Mora, J. F., & Loscertales, I. G. (1994) · Journal of Fluid Mechanics · doi:10.1017/s0022112094003472 · Cited by 884
Controlled Delivery Systems for Proteins Based on Poly(Lactic/Glycolic Acid) Microspheres
Cohen, S., Yoshioka, T., Lucarelli, M., Hwang, L. H., & Langer, R. (1991) · Pharmaceutical Research · doi:10.1023/a:1015841715384 · Cited by 843
Gupta, P., Elkins, C., Long, T. E., & Wilkes, G. L. (2005) · Polymer · doi:10.1016/j.polymer.2005.04.021 · Cited by 834
Bone tissue engineering: A review in bone biomimetics and drug delivery strategies
Porter, J. R., Ruckh, T. T., & Popat, K. C. (2009) · Biotechnology Progress · doi:10.1002/btpr.246 · Cited by 809
Current and droplet size in the electrospraying of liquids. Scaling laws
Gañán-Calvo, A. M., Dávila, J., & Barrero, A. (1997) · Journal of Aerosol Science · doi:10.1016/s0021-8502(96)00433-8 · Cited by 780
Nano-fibrous scaffolds for tissue engineering
Smith, L. A., & Ma, P. X. (2004) · Colloids and Surfaces B: Biointerfaces · doi:10.1016/j.colsurfb.2003.12.004 · Cited by 652
Toward delivery of multiple growth factors in tissue engineering
Chen, F.-M., Zhang, M., & Wu, Z.-F. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.04.053 · Cited by 649
Design, fabrication and characterization of PCL electrospun scaffolds—a review
Cipitria, A., Skelton, A., Dargaville, T. R., Dalton, P. D., & Hutmacher, D. W. (2011) · Journal of Materials Chemistry · doi:10.1039/c0jm04502k · Cited by 627
Self-citationBaker, B. M., Gee, A. O., Metter, R. B., Nathan, A. S., Marklein, R. A., Burdick, J. A., & Mauck, R. L. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2008.01.032 · Cited by 620
Stabilization of proteins encapsulated in injectable poly (lactide- co-glycolide)
Zhu, G., Mallery, S. R., & Schwendeman, S. P. (2000) · Nature Biotechnology · doi:10.1038/71916 · Cited by 609
Sustained Release of Proteins from Electrospun Biodegradable Fibers
Chew, S. Y., Wen, J., Yim, E. K. F., & Leong, K. W. (2005) · Biomacromolecules · doi:10.1021/bm0501149 · Cited by 584
Electrohydrodynamics: A facile technique to fabricate drug delivery systems
Chakraborty, S., Liao, I.-C., Adler, A., & Leong, K. W. (2009) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2009.07.013 · Cited by 549
Jiang, H., Hu, Y., Li, Y., Zhao, P., Zhu, K., & Chen, W. (2005) · Journal of Controlled Release · doi:10.1016/j.jconrel.2005.08.006 · Cited by 533
Choi, J. S., Leong, K. W., & Yoo, H. S. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2007.10.012 · Cited by 516
Cahill, K. S. (2009) · JAMA · doi:10.1001/jama.2009.956 · Cited by 489
Polymer carriers for drug delivery in tissue engineering
Sokolsky-Papkov, M., Agashi, K., Olaye, A., Shakesheff, K., & Domb, A. J. (2007) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2007.04.001 · Cited by 452
Production methods for nanodrug particles using the bottom-up approach
Chan, H.-K., & Kwok, P. C. L. (2011) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2011.03.011 · Cited by 451
Tethered-TGF-β increases extracellular matrix production of vascular smooth muscle cells
Mann, B. K., Schmedlen, R. H., & West, J. L. (2001) · Biomaterials · doi:10.1016/s0142-9612(00)00196-4 · Cited by 449
Growth Factor Delivery for Tissue Engineering
Babensee, J. E., McIntire, L. V., & Mikos, A. G. (2000) · Pharmaceutical Research · doi:10.1023/a:1007502828372 · Cited by 435
Polymeric Growth Factor Delivery Strategies for Tissue Engineering
Chen, R. R., & Mooney, D. J. (2003) · Pharmaceutical Research · doi:10.1023/a:1025034925152 · Cited by 435
Functional aliphatic polyesters for biomedical and pharmaceutical applications
Seyednejad, H., Ghassemi, A. H., van Nostrum, C. F., Vermonden, T., & Hennink, W. E. (2011) · Journal of Controlled Release · doi:10.1016/j.jconrel.2010.12.016 · Cited by 425
Controlled drug delivery in tissue engineering
Biondi, M., Ungaro, F., Quaglia, F., & Netti, P. A. (2008) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2007.08.038 · Cited by 412
Issues in long-term protein delivery using biodegradable microparticles
Ye, M., Kim, S., & Park, K. (2010) · Journal of Controlled Release · doi:10.1016/j.jconrel.2010.05.011 · Cited by 386
Putting Electrospun Nanofibers to Work for Biomedical Research
Xie, J., Li, X., & Xia, Y. (2008) · Macromolecular Rapid Communications · doi:10.1002/marc.200800381 · Cited by 381
Microintegrating smooth muscle cells into a biodegradable, elastomeric fiber matrix
Stankus, J. J., Guan, J., Fujimoto, K., & Wagner, W. R. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2005.06.020 · Cited by 373
Contractile cardiac grafts using a novel nanofibrous mesh
Shin, M., Ishii, O., Sueda, T., & Vacanti, J. P. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2003.10.055 · Cited by 359
PLA Nano‐ and Microparticles for Drug Delivery: An Overview of the Methods of Preparation
Lassalle, V., & Ferreira, M. L. (2007) · Macromolecular Bioscience · doi:10.1002/mabi.200700022 · Cited by 340
Interaction of cells and nanofiber scaffolds in tissue engineering
Venugopal, J., Low, S., Choon, A. T., & Ramakrishna, S. (2008) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.30841 · Cited by 332
Bock, N., Woodruff, M. A., Hutmacher, D. W., & Dargaville, T. R. (2011) · Polymers · doi:10.3390/polym3010131 · Cited by 326
Self-citationQi, H., Hu, P., Xu, J., & Wang, A. (2006) · Biomacromolecules · doi:10.1021/bm060264z · Cited by 323
Gupta, D., Venugopal, J., Mitra, S., Giri Dev, V. R., & Ramakrishna, S. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2008.12.079 · Cited by 317
Bilati, U., Allémann, E., & Doelker, E. (2005) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2004.10.006 · Cited by 313
Yang, Y.-Y., Chung, T.-S., Bai, X.-L., & Chan, W.-K. (2000) · Chemical Engineering Science · doi:10.1016/s0009-2509(99)00503-5 · Cited by 298
On the Equilibrium of Liquid Conducting Masses charged with Electricity
(2009) · Scientific Papers · doi:10.1017/cbo9780511703973.013 · Cited by 290
The Roles of Hypoxia in the In Vitro Engineering of Tissues
Malda, J., Klein, T. J., & Upton, Z. (2007) · Tissue Engineering · doi:10.1089/ten.2006.0417 · Cited by 282
Controlling the morphology of electrospray-generated PLGA microparticles for drug delivery
Almería, B., Deng, W., Fahmy, T. M., & Gomez, A. (2010) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2009.10.002 · Cited by 277
Ekaputra, A. K., Prestwich, G. D., Cool, S. M., & Hutmacher, D. W. (2008) · Biomacromolecules · doi:10.1021/bm800565u · Cited by 253
Electrohydrodynamic atomization for biodegradable polymeric particle production
Xie, J., Lim, L. K., Phua, Y., Hua, J., & Wang, C.-H. (2006) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2006.06.037 · Cited by 251
Aligned Core–Shell Nanofibers Delivering Bioactive Proteins
Liao, I., Chew, S., & Leong, K. (2006) · Nanomedicine · doi:10.2217/17435889.1.4.465 · Cited by 223
Three‐dimensional fibrous PLGA/HAp composite scaffold for BMP‐2 delivery
Nie, H., Soh, B. W., Fu, Y., & Wang, C. (2008) · Biotechnology and Bioengineering · doi:10.1002/bit.21517 · Cited by 208
Xie, J., Marijnissen, J. C. M., & Wang, C.-H. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.01.034 · Cited by 207
Ekaputra, A. K., Prestwich, G. D., Cool, S. M., & Hutmacher, D. W. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2011.07.022 · Cited by 202
Fabrication of cell microintegrated blood vessel constructs through electrohydrodynamic atomization
Stankus, J. J., Soletti, L., Fujimoto, K., Hong, Y., Vorp, D. A., & Wagner, W. R. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2007.02.012 · Cited by 198
Arya, N., Chakraborty, S., Dube, N., & Katti, D. S. (2009) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.31085 · Cited by 192
King, T. W., & Patrick, C. (2000) · Journal of Biomedical Materials Research · Cited by 187
Particle size affects the cellular response in macrophages
Yue, H., Wei, W., Yue, Z., Lv, P., Wang, L., Ma, G., & Su, Z. (2010) · European Journal of Pharmaceutical Sciences · doi:10.1016/j.ejps.2010.09.006 · Cited by 185
Sequential release of bioactive IGF-I and TGF-β1 from PLGA microsphere-based scaffolds
Jaklenec, A., Hinckfuss, A., Bilgen, B., Ciombor, D. M., Aaron, R., & Mathiowitz, E. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2007.12.004 · Cited by 185
Fabrication and characterization of 3-dimensional PLGA nanofiber/microfiber composite scaffolds
Kim, S. J., Jang, D. H., Park, W. H., & Min, B.-M. (2010) · Polymer · doi:10.1016/j.polymer.2010.01.025 · Cited by 182
Encapsulation of protein drugs in biodegradable microparticles by co-axial electrospray
Xie, J., Ng, W. J., Lee, L. Y., & Wang, C.-H. (2008) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2007.09.082 · Cited by 181
One-step preparation of chitosan solid nanoparticles by electrospray deposition
Zhang, S., & Kawakami, K. (2010) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2010.07.007 · Cited by 181
Sanders, E. H., Kloefkorn, R., Bowlin, G. L., Simpson, D. G., & Wnek, G. E. (2003) · Macromolecules · doi:10.1021/ma021771l · Cited by 178
Fu, Y., Nie, H., Ho, M., Wang, C., & Wang, C. (2008) · Biotechnology and Bioengineering · doi:10.1002/bit.21648 · Cited by 177
Controlled release of transforming growth factor ?1 from biodegradable polymer microparticles
Lu, L., Stamatas, G. N., & Mikos, A. G. (2000) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(20000605)50:3<440::aid-jbm19>3.0.co;2-g · Cited by 170
Mapping neutral microclimate pH in PLGA microspheres
Li, L., & Schwendeman, S. P. (2005) · Journal of Controlled Release · doi:10.1016/j.jconrel.2004.07.029 · Cited by 167
XU, Y., & HANNA, M. (2006) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2006.03.046 · Cited by 166
Tissue engineering with nano-fibrous scaffolds
Smith, L. A., Liu, X., & Ma, P. X. (2008) · Soft Matter · doi:10.1039/b807088c · Cited by 165
Production of protein nanoparticles by electrospray drying
Gomez, A., Bingham, D., Juan, L. D., & Tang, K. (1998) · Journal of Aerosol Science · doi:10.1016/s0021-8502(97)10031-3 · Cited by 161
Morita, T., Sakamura, Y., Horikiri, Y., Suzuki, T., & Yoshino, H. (2000) · Journal of Controlled Release · doi:10.1016/s0168-3659(00)00326-6 · Cited by 159
Electrospray Encapsulation of Hydrophilic and Hydrophobic Drugs in Poly(L‐lactic acid) Nanoparticles
Valo, H., Peltonen, L., Vehviläinen, S., Karjalainen, M., Kostiainen, R., Laaksonen, T., & Hirvonen, J. (2009) · Small · doi:10.1002/smll.200801907 · Cited by 158
Peltonen, L., Valo, H., Kolakovic, R., Laaksonen, T., & Hirvonen, J. J. (2010) · Expert Opinion on Drug Delivery · doi:10.1517/17425241003716802 · Cited by 157
Electrostatic micro- and nanoencapsulation and electroemulsification: A brief review
Jaworek, A. (2008) · Journal of Microencapsulation · doi:10.1080/02652040802049109 · Cited by 150
Xie, J., & Wang, C. (2007) · Biotechnology and Bioengineering · doi:10.1002/bit.21334 · Cited by 149
Electro-hydrodynamic atomization of drug solutions for inhalation purposes
Ijsebaert, J. C., Geerse, K. B., Marijnissen, J. C. M., Lammers, J. J., & Zanen, P. (2001) · Journal of Applied Physiology · doi:10.1152/jappl.2001.91.6.2735 · Cited by 140
Songsurang, K., Praphairaksit, N., Siraleartmukul, K., & Muangsin, N. (2011) · Archives of Pharmacal Research · doi:10.1007/s12272-011-0408-5 · Cited by 127
Pişkin, E., İşoğlu, İ. A., Bölgen, N., Vargel, I., Griffiths, S., Çavuşoğlu, T., Korkusuz, P., Güzel, E., & Cartmell, S. (2009) · Journal of Biomedical Materials Research. Part A · doi:10.1002/jbm.a.32157 · Cited by 126
Ahmad, Z., Zhang, H., Farook, U., Edirisinghe, M. J., Stride, E., & Colombo, P. (2008) · Journal of The Royal Society Interface · doi:10.1098/rsif.2008.0247 · Cited by 126
In vitro cellular responses to scaffolds containing two microencapulated growth factors
Chen, F., Chen, R., Wang, X., Sun, H., & Wu, Z. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.06.009 · Cited by 124
Ionescu, L. C., Lee, G. C., Sennett, B. J., Burdick, J. A., & Mauck, R. L. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.01.098 · Cited by 123
Ranganath, S. H., Kee, I. H. C., Krantz, W. B., Chow, P. K. H., & Wang, C.-H. (2009) · Pharmaceutical Research · doi:10.1007/s11095-009-9922-2 · Cited by 113
Hong, Y., Fujimoto, K. L., Hashizume, R., Guan, J., Stankus, J. J., Tobita, K., & Wagner, W. R. (2008) · Biomacromolecules · doi:10.1021/bm701201w · Cited by 113
Francis, L., Venugopal, J. R., Prabhakaran, M. P., Thavasi, V., Marsano, E., & Ramakrishna, S. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.05.001 · Cited by 106
Almería, B., Fahmy, T. M., & Gomez, A. (2011) · Journal of Controlled Release · doi:10.1016/j.jconrel.2011.05.018 · Cited by 106
Wu, Y., & Clark, R. L. (2008) · Journal of Biomaterials Science Polymer Edition · doi:10.1163/156856208784089616 · Cited by 102
Production of Uniform-Sized Polymer Core−Shell Microcapsules by Coaxial Electrospraying
Hwang, Y. K., Jeong, U., & Cho, E. C. (2008) · Langmuir · doi:10.1021/la703546f · Cited by 97
A novel method for the preparation of biodegradable microspheres for protein drug delivery
Pareta, R. A., & Edirisinghe, M. J. (2006) · Journal of The Royal Society Interface · doi:10.1098/rsif.2006.0120 · Cited by 89
Xie, J., Tan, R. S., & Wang, C. (2007) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.31499 · Cited by 86
Amsden, B. G., & Goosen, M. F. A. (1997) · Journal of Controlled Release · doi:10.1016/s0168-3659(96)01483-6 · Cited by 85
Encapsulation of Multiple Biological Compounds Within a Single Electrospun Fiber
Dong, B., Smith, M., & Wnek, G. E. (2009) · Small · doi:10.1002/smll.200801750 · Cited by 80
Electrosprayed polymer particles: Effect of the solvent properties
Park, C. H., & Lee, J. (2009) · Journal of Applied Polymer Science · doi:10.1002/app.30498 · Cited by 80
Electrohydrodynamic atomization of quasi-monodisperse drug-loaded spherical/wrinkled microparticles
Hong, Y., Li, Y., Yin, Y., Li, D., & Zou, G. (2008) · Journal of Aerosol Science · doi:10.1016/j.jaerosci.2008.02.004 · Cited by 80
Paclitaxel and suramin-loaded core/shell microspheres in the treatment of brain tumors
Nie, H., Fu, Y., & Wang, C. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.07.080 · Cited by 80
Chang, M., Stride, E., & Edirisinghe, M. J. (2010) · Journal of The Royal Society Interface · doi:10.1098/rsif.2010.0092.focus · Cited by 80
Enhanced composite electrospun nanofiber scaffolds for use in drug delivery
Hadjiargyrou, M., & Chiu, J. B. (2008) · Expert Opinion on Drug Delivery · doi:10.1517/17425247.5.10.1093 · Cited by 79
Preparation of microspheres containing low solubility drug compound by electrohydrodynamic spraying
Bohr, A., Kristensen, J., Stride, E., Dyas, M., & Edirisinghe, M. J. (2011) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2011.04.005 · Cited by 76
Wang, F., Li, Z., Tamama, K., Sen, C. K., & Guan, J. (2009) · Biomacromolecules · doi:10.1021/bm900541u · Cited by 73
Xu, Y., Skotak, M., & Hanna, M. A. (2006) · Journal of Microencapsulation · doi:10.1080/02652040500435048 · Cited by 73
Nie, H., Dong, Z., Arifin, D. Y., Hu, Y., & Wang, C. (2010) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.32867 · Cited by 72
Biohybrid nanofiber constructs with anisotropic biomechanical properties
Bonani, W., Maniglio, D., Motta, A., Tan, W., & Migliaresi, C. (2010) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.31763 · Cited by 68
Size mapping of electric field-assisted production of polycaprolactone particles
Enayati, M., Ahmad, Z., Stride, E., & Edirisinghe, M. J. (2010) · Journal of The Royal Society Interface · doi:10.1098/rsif.2010.0099.focus · Cited by 68
Albumin: A versatile carrier for drug delivery
Park, K. (2011) · Journal of Controlled Release · doi:10.1016/j.jconrel.2011.11.015 · Cited by 58
Electrospray technique for solid lipid-based particle production
Trotta, M., Cavalli, R., Trotta, C., Bussano, R., & Costa, L. (2010) · Drug Development and Industrial Pharmacy · doi:10.3109/03639040903241817 · Cited by 55
Naraharisetti, P. K., Ong, B. Y. S., WEIXIE, J., Lee, T. K. Y., Wang, C.-H., & Sahinidis, N. V. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.09.044 · Cited by 54
Bertram, J. P., Rauch, M. F., Chang, K., & Lavik, E. (2009) · Pharmaceutical Research · doi:10.1007/s11095-009-0009-x · Cited by 53
Meng, F., Jiang, Y., Sun, Z., Yin, Y., & Li, Y. (2009) · Journal of Applied Polymer Science · doi:10.1002/app.30107 · Cited by 52
Midhun, B. T., Shalumon, K. T., Manzoor, K., Jayakumar, R., Nair, S. V., & Deepthy, M. (2011) · Journal of Biomaterials Science Polymer Edition · doi:10.1163/092050610x540486 · Cited by 44
Park, S., Hwang, S., & Lee, J. (2011) · Chemical Engineering Journal · doi:10.1016/j.cej.2011.02.063 · Cited by 41
The origins of the gauge system for medical equipment
Iserson, K. V. (1987) · Journal of Emergency Medicine · doi:10.1016/0736-4679(87)90009-6 · Cited by 40
Maintaining bioactivity of NGF for controlled release from PLGA using PEG
Johnson, P. J., Skornia, S. L., Stabenfeldt, S. E., et al. (2007) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.31635 · Cited by 34
Polymeric particle formation through electrospraying at low atmospheric pressure
Wu, Y., Kennedy, S. J., & Clark, R. L. (2008) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.31296 · Cited by 34
Cavalli, R., Bisazza, A., Bussano, R., Trotta, M., Civra, A., Lembo, D., Ranucci, E., & Ferruti, P. (2011) · Journal of Drug Delivery · doi:10.1155/2011/587604 · Cited by 31
Electrohydrodynamic preparation of polymeric drug-carrier particles: Mapping of the process
Enayati, M., Farook, U., Edirisinghe, M. J., & Stride, E. (2010) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2010.11.014 · Cited by 20
High-voltage, electric field-driven micro/nanofabrication for polymeric drug delivery systems
Xie, Y., & Castracane, J. (2009) · IEEE Engineering in Medicine and Biology Magazine · doi:10.1109/memb.2008.931013 · Cited by 20
Xue, L., Mao, L., Cai, Q., Yang, X., & Jin, R. (2010) · Polymers for Advanced Technologies · doi:10.1002/pat.1711 · Cited by 19
Kim, S., Lee, H.-A., Cho, S., Park, J. W., Park, J., & Hwang, J. (2011) · Industrial & Engineering Chemistry Research · doi:10.1021/ie200915x · Cited by 17
Rezvanpour, A., Attia, A. B. E., & Wang, C.-H. (2010) · Industrial & Engineering Chemistry Research · doi:10.1021/ie1009662 · Cited by 15
Electro-spinning of pure collagen nano-fibres–just an expensive way to make gelatin?
Zeugolis, D. I., Khew, S. T., Yew, E. S. Y., Ekaputra, A. K., Tong, Y. W., Yung, L.-Y. L., Hutmacher, D. W., Sheppard, C., & Raghunath, M. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2008.02.009 · Cited by 1
Cited by
Electrospinning and electrospraying techniques: Potential food based applications
Anu Bhushani, J., & Anandharamakrishnan, C. (2014) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2014.03.004 · Cited by 646
Pharmaceutical amorphous solid dispersion: A review of manufacturing strategies
Bhujbal, S. V., Mitra, B., Jain, U., Gong, Y., Agrawal, A., Karki, S., Taylor, L. S., Kumar, S., & (Tony) Zhou, Q. (2021) · Acta Pharmaceutica Sinica B · doi:10.1016/j.apsb.2021.05.014 · Cited by 556
Sridhar, R., Lakshminarayanan, R., Madhaiyan, K., Amutha Barathi, V., Lim, K. H. C., & Ramakrishna, S. (2015) · Chemical Society Reviews · doi:10.1039/c4cs00226a · Cited by 519
Ghorani, B., & Tucker, N. (2015) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2015.05.024 · Cited by 493
Drug delivery systems for programmed and on-demand release
Davoodi, P., Lee, L. Y., Xu, Q., Sunil, V., Sun, Y., Soh, S., & Wang, C.-H. (2018) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2018.07.002 · Cited by 353
Metadata
- Authors
- Bock, N., Dargaville, T. R., & Woodruff, M. A.
- Venue
- Progress in Polymer Science
- Publisher
- Elsevier BV
- Published
- 2012-11
- Volume
- 37
- Issue
- 11
- Pages
- 1510-1551
- ISSN
- 0079-6700 (ISSN-L)
- OpenAlex
- W2076463247
- Cited by
- 440
- References
- 124
- FWCI
- 15.06
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.