The DOI matches its Crossref record; 128 of the 128 references it cites were found in a registry or an index.
3D-printed sensors: Current progress and future challenges
Abstract
Abstract Due to the technological advances, sensors have found a significant role in different aspects of human life. The sensors have been fabricated via various manufacturing processes. Recently, additive manufacturing (AM) has become a common method for fabrication of a wide range of engineering components in many industries. This manufacturing method, commonly known as three-dimensional (3D) printing is based on melting and solidification that leads to production of a component with high dimensional accuracy and smooth surface finish. As precision and elegant techniques are needed in manufacturing of the sensors, AM has been utilized in fabrication of these parts in the last few years. In this study, we summarized and classified applications of different AM methods in manufacturing of sensors. In this context, we briefly reviewed and compared AM techniques and categorized 3D-printed sensors based on their applications. Moreover, fabrication of sensors via AM is explained in details, challenges and future prospect of this manufacturing process are discussed. Investigations on the performed studies proved that higher printing resolution, faster speed and higher efficiency are needed to reach a remarkable advance in the production of 3D-printed sensors. The presented data can be utilized not only for comparison, improvement and optimization of fabrication processes, but also is beneficial for next research in production of highly sensitive sensors.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
High-Resolution Inkjet Printing of All-Polymer Transistor Circuits
Sirringhaus, H., Kawase, T., Friend, R. H., Shimoda, T., Inbasekaran, M., Wu, W., & Woo, E. P. (2000) · Science · doi:10.1126/science.290.5499.2123 · Cited by 3,311
A stretchable carbon nanotube strain sensor for human-motion detection
Yamada, T., Hayamizu, Y., Yamamoto, Y., Yomogida, Y., Izadi-Najafabadi, A., Futaba, D. N., & Hata, K. (2011) · Nature Nanotechnology · doi:10.1038/nnano.2011.36 · Cited by 3,247
Skin-like pressure and strain sensors based on transparent elastic films of carbon nanotubes
Lipomi, D. J., Vosgueritchian, M., Tee, B. C.-K., Hellstrom, S. L., Lee, J. A., Fox, C. H., & Bao, Z. (2011) · Nature Nanotechnology · doi:10.1038/nnano.2011.184 · Cited by 3,188
Micro Total Analysis Systems. 1. Introduction, Theory, and Technology
Reyes, D. R., Iossifidis, D., Auroux, P.-A., & Manz, A. (2002) · Analytical Chemistry · doi:10.1021/ac0202435 · Cited by 2,191
Additive manufacturing: scientific and technological challenges, market uptake and opportunities
Tofail, S. A. M., Koumoulos, E. P., Bandyopadhyay, A., Bose, S., O’Donoghue, L., & Charitidis, C. (2018) · Materials Today · doi:10.1016/j.mattod.2017.07.001 · Cited by 2,136
Evaluation of 3D Printing and Its Potential Impact on Biotechnology and the Chemical Sciences
Gross, B. C., Erkal, J. L., Lockwood, S. Y., Chen, C., & Spence, D. M. (2014) · Analytical Chemistry · doi:10.1021/ac403397r · Cited by 1,746
Embedded 3D Printing of Strain Sensors within Highly Stretchable Elastomers
Muth, J. T., Vogt, D. M., Truby, R. L., Mengüç, Y., Kolesky, D. B., Wood, R. J., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201400334 · Cited by 1,611
Mannoor, M. S., Jiang, Z., James, T., Kong, Y. L., Malatesta, K. A., Soboyejo, W. O., Verma, N., Gracias, D. H., & McAlpine, M. C. (2013) · Nano Letters · doi:10.1021/nl4007744 · Cited by 874
Three-dimensional (3D) printed scaffold and material selection for bone repair
Zhang, L., Yang, G., Johnson, B. N., & Jia, X. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.11.039 · Cited by 865
Instrumented cardiac microphysiological devices via multimaterial three-dimensional printing
Lind, J. U., Busbee, T. A., Valentine, A. D., Pasqualini, F. S., Yuan, H., Yadid, M., Park, S.-J., Kotikian, A., Nesmith, A. P., Campbell, P. H., et al. (2017) · Nature Materials · doi:10.1038/nmat4782 · Cited by 863
Design and Fabrication of Soft Artificial Skin Using Embedded Microchannels and Liquid Conductors
Park, Y.-L., Chen, B.-R., & Wood, R. J. (2012) · IEEE Sensors Journal · doi:10.1109/jsen.2012.2200790 · Cited by 776
A review of tactile sensing technologies with applications in biomedical engineering
Tiwana, M. I., Redmond, S. J., & Lovell, N. H. (2012) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2012.02.051 · Cited by 721
Xu, L., Gutbrod, S. R., Bonifas, A. P., Su, Y., Sulkin, M. S., Lu, N., Chung, H.-J., Jang, K.-I., Liu, Z., Ying, M., et al. (2014) · Nature Communications · doi:10.1038/ncomms4329 · Cited by 634
3D Printing for the Rapid Prototyping of Structural Electronics
Macdonald, E., Salas, R., Espalin, D., Perez, M., Aguilera, E., Muse, D., & Wicker, R. B. (2014) · IEEE Access · doi:10.1109/access.2014.2311810 · Cited by 606
Christ, J. F., Aliheidari, N., Ameli, A., & Pötschke, P. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.06.011 · Cited by 481
Wang, Y., Li, J., Jing, H., Zhang, Q., Jiang, J., & Biswas, P. (2015) · Aerosol Science and Technology · doi:10.1080/02786826.2015.1100710 · Cited by 471
Capacitive Soft Strain Sensors via Multicore–Shell Fiber Printing
Frutiger, A., Muth, J. T., Vogt, D. M., Mengüç, Y., Campo, A., Valentine, A. D., Walsh, C. J., & Lewis, J. A. (2015) · Advanced Materials · doi:10.1002/adma.201500072 · Cited by 468
Sensor for Measuring Strain in Textile
Mattmann, C., Clemens, F., & Tröster, G. (2008) · Sensors · doi:10.3390/s8063719 · Cited by 464
Recent advances in flexible sensors for wearable and implantable devices
Pang, C., Lee, C., & Suh, K. (2013) · Journal of Applied Polymer Science · doi:10.1002/app.39461 · Cited by 457
Proceedings of IEEE Sensors 2004
(2004) · Proceedings of IEEE Sensors, 2004. · doi:10.1109/icsens.2004.1426074 · Cited by 430
Characterizing and Patterning of PDMS‐Based Conducting Composites
Niu, X. Z., Peng, S. L., Liu, L. Y., Wen, W. J., & Sheng, P. (2007) · Advanced Materials · doi:10.1002/adma.200602515 · Cited by 414
Fukuda, K., Takeda, Y., Yoshimura, Y., Shiwaku, R., Tran, L. T., Sekine, T., Mizukami, M., Kumaki, D., & Tokito, S. (2014) · Nature Communications · doi:10.1038/ncomms5147 · Cited by 403
Liu, Y., Zhou, H., Hu, Z., Yu, G., Yang, D., & Zhao, J. (2017) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2017.02.032 · Cited by 388
Review of graphene-based strain sensors
Zhao, J., Zhang, G.-Y., & Shi, D.-X. (2013) · Chinese Physics B · doi:10.1088/1674-1056/22/5/057701 · Cited by 387
Mail-order microfluidics: evaluation of stereolithography for the production of microfluidic devices
Au, A. K., Lee, W., & Folch, A. (2014) · Lab Chip · doi:10.1039/c3lc51360b · Cited by 380
Inkjet-Printed Graphene/PEDOT:PSS Temperature Sensors on a Skin-Conformable Polyurethane Substrate
Vuorinen, T., Niittynen, J., Kankkunen, T., Kraft, T. M., & Mäntysalo, M. (2016) · Scientific Reports · doi:10.1038/srep35289 · Cited by 335
Electrically conductive filament for 3D-printed circuits and sensors
Kwok, S. W., Goh, K. H. H., Tan, Z. D., Tan, S. T. M., Tjiu, W. W., Soh, J. Y., Ng, Z. J. G., Chan, Y. Z., Hui, H. K., & Goh, K. E. J. (2017) · Applied Materials Today · doi:10.1016/j.apmt.2017.07.001 · Cited by 332
3D printing of electrically conductive hydrogels for tissue engineering and biosensors – A review
Distler, T., & Boccaccini, A. R. (2020) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.08.044 · Cited by 326
A robust and anonymous patient monitoring system using wireless medical sensor networks
Amin, R., Islam, S. H., Biswas, G. P., Khan, M. K., & Kumar, N. (2018) · Future Generation Computer Systems · doi:10.1016/j.future.2016.05.032 · Cited by 315
3D-printed microfluidic automation
Au, A. K., Bhattacharjee, N., Horowitz, L. F., Chang, T. C., & Folch, A. (2015) · Lab on a Chip · doi:10.1039/c5lc00126a · Cited by 311
Printed optics: 3D printing of embedded optical elements for interactive devices
Willis, K., Brockmeyer, E., Hudson, S., & Poupyrev, I. (2012) · Proceedings of the 25th annual ACM symposium on User interface software and technology · doi:10.1145/2380116.2380190 · Cited by 306
3D printing for electroanalysis: From multiuse electrochemical cells to sensors
Cardoso, R. M., Mendonça, D. M. H., Silva, W. P., Silva, M. N. T., Nossol, E., da Silva, R. A. B., Richter, E. M., & Muñoz, R. A. A. (2018) · Analytica Chimica Acta · doi:10.1016/j.aca.2018.06.021 · Cited by 294
3D printed microfluidic devices with integrated versatile and reusable electrodes
Erkal, J. L., Selimovic, A., Gross, B. C., Lockwood, S. Y., Walton, E. L., McNamara, S., Martin, R. S., & Spence, D. M. (2014) · Lab Chip · doi:10.1039/c4lc00171k · Cited by 287
On the environmental impacts of 3D printing technology
Khosravani, M. R., & Reinicke, T. (2020) · Applied Materials Today · doi:10.1016/j.apmt.2020.100689 · Cited by 284
Self-citationNanoparticle films as sensitive strain gauges
Herrmann, J., Müller, K.-H., Reda, T., Baxter, G. R., Raguse, B., de Groot, G. J. J. B., Chai, R., Roberts, M., & Wieczorek, L. (2007) · Applied Physics Letters · doi:10.1063/1.2805026 · Cited by 275
Liu, C., Huang, N., Xu, F., Tong, J., Chen, Z., Gui, X., Fu, Y., & Lao, C. (2018) · Polymers · doi:10.3390/polym10060629 · Cited by 274
3D Printed Sensors for Biomedical Applications: A Review
Han, T., Kundu, S., Nag, A., & Xu, Y. (2019) · Sensors · doi:10.3390/s19071706 · Cited by 266
A 3D printed dry electrode for ECG/EEG recording
Salvo, P., Raedt, R., Carrette, E., Schaubroeck, D., Vanfleteren, J., & Cardon, L. (2012) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2011.12.017 · Cited by 264
Temperature sensor realized by inkjet printing process on flexible substrate
Dankoco, M. D., Tesfay, G. Y., Benevent, E., & Bendahan, M. (2016) · Materials Science and Engineering: B · doi:10.1016/j.mseb.2015.11.003 · Cited by 246
3D printed microfluidic circuitry via multijet-based additive manufacturing
Sochol, R. D., Sweet, E., Glick, C. C., Venkatesh, S., Avetisyan, A., Ekman, K. F., Raulinaitis, A., Tsai, A., Wienkers, A., Korner, K., et al. (2016) · Lab on a Chip · doi:10.1039/c5lc01389e · Cited by 237
Deterministic Coupling of Quantum Emitters in 2D Materials to Plasmonic Nanocavity Arrays
Tran, T. T., Wang, D., Xu, Z.-Q., Yang, A., Toth, M., Odom, T. W., & Aharonovich, I. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b00444 · Cited by 231
A 3D Printed Fluidic Device that Enables Integrated Features
Anderson, K. B., Lockwood, S. Y., Martin, R. S., & Spence, D. M. (2013) · Analytical Chemistry · doi:10.1021/ac4009594 · Cited by 229
Roriz, P., Carvalho, L., Frazão, O., Santos, J. L., & Simões, J. A. (2014) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2014.01.054 · Cited by 226
Soft Thermal Sensor with Mechanical Adaptability
Yang, H., Qi, D., Liu, Z., Chandran, B. K., Wang, T., Yu, J., & Chen, X. (2016) · Advanced Materials · doi:10.1002/adma.201602994 · Cited by 225
Closed-loop 4D-printed soft robots
Zolfagharian, A., Kaynak, A., & Kouzani, A. (2020) · Materials & Design · doi:10.1016/j.matdes.2019.108411 · Cited by 225
3D printed microfluidics and microelectronics
Sochol, R. D., Sweet, E., Glick, C. C., Wu, S.-Y., Yang, C., Restaino, M., & Lin, L. (2018) · Microelectronic Engineering · doi:10.1016/j.mee.2017.12.010 · Cited by 223
Helical 3D‐Printed Metal Electrodes as Custom‐Shaped 3D Platform for Electrochemical Devices
Ambrosi, A., Moo, J. G. S., & Pumera, M. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201503902 · Cited by 214
Application of 3D Printing for Smart Objects with Embedded Electronic Sensors and Systems
Ota, H., Emaminejad, S., Gao, Y., Zhao, A., Wu, E., Challa, S., Chen, K., Fahad, H. M., Jha, A. K., Kiriya, D., et al. (2016) · Advanced Materials Technologies · doi:10.1002/admt.201600013 · Cited by 212
Tactile sensors for robotic applications
Girão, P. S., Ramos, P. M. P., Postolache, O., & Miguel Dias Pereira, J. (2013) · Measurement · doi:10.1016/j.measurement.2012.11.015 · Cited by 211
Wang, Z., Gao, W., Zhang, Q., Zheng, K., Xu, J., Xu, W., Shang, E., Jiang, J., Zhang, J., & Liu, Y. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b16139 · Cited by 206
Roda, A., Guardigli, M., Calabria, D., Calabretta, M. M., Cevenini, L., & Michelini, E. (2014) · The Analyst · doi:10.1039/c4an01612b · Cited by 205
3D printing to enable multifunctionality in polymer-based composites: A review
Bekas, D. G., Hou, Y., Liu, Y., & Panesar, A. (2019) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2019.107540 · Cited by 194
Gowers, S. A. N., Curto, V. F., Seneci, C. A., Wang, C., Anastasova, S., Vadgama, P., Yang, G.-Z., & Boutelle, M. G. (2015) · Analytical Chemistry · doi:10.1021/acs.analchem.5b01353 · Cited by 193
3D printed nervous system on a chip
Johnson, B. N., Lancaster, K. Z., Hogue, I. B., Meng, F., Kong, Y. L., Enquist, L. W., & McAlpine, M. C. (2016) · Lab on a Chip · doi:10.1039/c5lc01270h · Cited by 191
Advances in three-dimensional rapid prototyping of microfluidic devices for biological applications
O’Neill, P., Azouz, A. B., Vázquez, M., Liu, J., Marczak, S. P., Slouka, Z., Chang, H., Diamond, D., & Brabazon, D. (2014) · Biomicrofluidics · doi:10.1063/1.4898632 · Cited by 174
3D-printed supercapacitor-powered electrochemiluminescent protein immunoarray
Kadimisetty, K., Mosa, I. M., Malla, S., Satterwhite-Warden, J. E., Kuhns, T. M., Faria, R. C., Lee, N. H., & Rusling, J. F. (2016) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2015.09.017 · Cited by 172
Shi, G., Lowe, S. E., Teo, A. J. T., Dinh, T. K., Tan, S. H., Qin, J., Zhang, Y., Zhong, Y. L., & Zhao, H. (2019) · Applied Materials Today · doi:10.1016/j.apmt.2019.06.016 · Cited by 170
Polymer-based smart materials by printing technologies: Improving application and integration
Oliveira, J., Correia, V., Castro, H., Martins, P., & Lanceros-Mendez, S. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.03.012 · Cited by 168
Xiang, D., Zhang, X., Harkin‐Jones, E., Zhu, W., Zhou, Z., Shen, Y., Li, Y., Zhao, C., & Wang, P. (2019) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2019.105730 · Cited by 164
A review of 3D-printed sensors
Ni, Y., Ji, R., Long, K., Bu, T., Chen, K., & Zhuang, S. (2017) · Applied Spectroscopy Reviews · doi:10.1080/05704928.2017.1287082 · Cited by 163
Review of Micro/Nanotechnologies for Microbial Biosensors
Lim, J. W., Ha, D., Lee, J., Lee, S. K., & Kim, T. (2015) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2015.00061 · Cited by 162
Su, W., Cook, B. S., Fang, Y., & Tentzeris, M. M. (2016) · Scientific Reports · doi:10.1038/srep35111 · Cited by 162
Zusman, M., Schumacher, C. S., Gassett, A. J., Spalt, E. W., Austin, E., Larson, T. V., Carvlin, G., Seto, E., Kaufman, J. D., & Sheppard, L. (2020) · Environment International · doi:10.1016/j.envint.2019.105329 · Cited by 162
3D printed chip for electrochemical detection of influenza virus labeled with CdS quantum dots
Krejčová, L., Nejdl, L., Rodrigo, M. Á. M., et al. (2013) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2013.10.031 · Cited by 153
Kong, Y. L., Gupta, M. K., Johnson, B. N., & McAlpine, M. C. (2016) · Nano Today · doi:10.1016/j.nantod.2016.04.007 · Cited by 153
Wan, X., Zhang, F., Liu, Y., & Leng, J. (2019) · Carbon · doi:10.1016/j.carbon.2019.08.047 · Cited by 149
Bishop, G. W., Satterwhite-Warden, J. E., Bhakta, S., Kadimisetty, K., Gillette, K. M., Chen, E., & Rusling, J. F. (2015) · Analytical Chemistry · doi:10.1021/acs.analchem.5b00903 · Cited by 147
Multi-material 3D printing of a soft pressure sensor
Emon, O. F., Alkadi, F., Philip, D. G., Kim, D., Lee, K.-C., & Choi, J. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.06.001 · Cited by 145
Ali, M. M., Maddipatla, D., Narakathu, B. B., Chlaihawi, A. A. J., Emamian, S., Janabi, F., Bazuin, B. J., & Atashbar, M. Z. (2018) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2018.03.003 · Cited by 138
Development and validation of a 3D-printed interfacial stress sensor for prosthetic applications
Laszczak, P., Jiang, L., Bader, D. L., et al. (2014) · Medical Engineering & Physics · doi:10.1016/j.medengphy.2014.10.002 · Cited by 135
Inkjet printing on paper for the realization of humidity and temperature sensors
Courbat, J., Kim, Y. B., Briand, D., & de Rooij, N. F. (2011) · International Conference on Solid-State Sensors, Actuators and Microsystems · doi:10.1109/transducers.2011.5969506 · Cited by 125
Hanada, Y., Sugioka, K., Shihira‐Ishikawa, I., Kawano, H., Miyawaki, A., & Midorikawa, K. (2011) · Lab on a Chip · doi:10.1039/c1lc20101h · Cited by 123
Design Principles for Rapid Prototyping Forces Sensors Using 3-D Printing
Kesner, S. B., & Howe, R. D. (2011) · IEEE/ASME Transactions on Mechatronics · doi:10.1109/tmech.2011.2160353 · Cited by 123
Giffney, T., Bejanin, E., Kurian, A. S., Travaš‐Sejdić, J., & Aw, K. C. (2017) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2017.03.005 · Cited by 122
3D printed mould-based graphite/PDMS sensor for low-force applications
Nag, A., Feng, S., Mukhopadhyay, S. C., Kosel, J., & Inglis, D. W. (2018) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2018.08.028 · Cited by 121
Smartphone-interfaced 3D printed toxicity biosensor integrating bioluminescent “sentinel cells”
Cevenini, L., Calabretta, M. M., Tarantino, G., Michelini, E., & Roda, A. (2015) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2015.11.017 · Cited by 119
Fully Printed Silver‐Nanoparticle‐Based Strain Gauges with Record High Sensitivity
Zhang, S., Cai, L., Li, W., Miao, J., Wang, T., Yeom, J., Sepúlveda, N., & Wang, C. (2017) · Advanced Electronic Materials · doi:10.1002/aelm.201700067 · Cited by 110
Motaghi, H., Ziyaee, S., Mehrgardi, M. A., Kajani, A. A., & Bordbar, A. (2018) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2018.07.066 · Cited by 110
Accelerated myotube formation using bioprinting technology for biosensor applications
Cui, X., Gao, G., & Qiu, Y. (2012) · Biotechnology Letters · doi:10.1007/s10529-012-1087-0 · Cited by 109
Fully 3D printed integrated reactor array for point-of-care molecular diagnostics
Kadimisetty, K., Song, J., Doto, A. M., Hwang, Y., Peng, J. Y., Mauk, M. G., Bushman, F. D., Gross, R., Jarvis, J. N., & Liu, C. (2018) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2018.03.009 · Cited by 105
Combined 3D printing technologies and material for fabrication of tactile sensors
Vatani, M., Lu, Y., Engeberg, E. D., & Choi, J. (2015) · International Journal of Precision Engineering and Manufacturing · doi:10.1007/s12541-015-0181-3 · Cited by 104
Fully Inkjet-Printed Flexible Temperature Sensors Based on Carbon and PEDOT:PSS1
Bali, C., Brandlmaier, A., Ganster, A., Raab, O., Zapf, J., & Hübler, A. C. (2016) · Materials Today Proceedings · doi:10.1016/j.matpr.2016.02.005 · Cited by 103
3D printed microfluidic devices for circulating tumor cells (CTCs) isolation
Chen, J., Liu, C., Wang, X., Sweet, E. C., Liu, N., Gong, X., & Lin, L. (2019) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2019.111900 · Cited by 100
Vatani, M., Engeberg, E. D., & Choi, J. (2013) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2013.03.019 · Cited by 98
3D printable composite dough for stretchable, ultrasensitive and body-patchable strain sensors
Kim, J. Y., Ji, S., Jung, S., Ryu, B.-H., Kim, H., Lee, S. S., Choi, Y., & Jeong, S. (2017) · Nanoscale · doi:10.1039/c7nr01865g · Cited by 96
DNA biosensing with 3D printing technology
Loo, A. H., Chua, C. K., & Pumera, M. (2016) · The Analyst · doi:10.1039/c6an02038k · Cited by 94
Damiati, S., Küpcü, S., Peacock, M., Eilenberger, C., Zamzami, M. A., Qadri, I., Choudhry, H., Sleytr, U. B., & Schuster, B. (2017) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2017.03.045 · Cited by 90
Low-cost ultra-stretchable strain sensors for monitoring human motion and bio-signals
Larimi, S. R., Nejad, H. R., Oyatsi, M., O’Brien, A., Hoorfar, M., & Najjaran, H. (2018) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2018.01.028 · Cited by 88
Vilardell, A. M., Takezawa, A., du Plessis, A., Takata, N., Krakhmalev, P., Kobashi, M., Yadroitsava, I., & Yadroitsev, I. A. (2019) · Materials Science and Engineering A · doi:10.1016/j.msea.2019.138330 · Cited by 86
A portable low-cost long-term live-cell imaging platform for biomedical research and education
Walzik, M. P., Vollmar, V., Lachnit, T., Dietz, H., Haug, S., Bachmann, H., Fath, M., Aschenbrenner, D., Mofrad, S. A., Friedrich, O., et al. (2014) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2014.09.061 · Cited by 85
Scordo, G., Moscone, D., Palleschi, G., & Arduini, F. (2017) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2017.11.134 · Cited by 85
Microscale additive manufacturing and modeling of interdigitated capacitive touch sensors
Rahman, M. T., Rahimi, A. A., Gupta, S., & Panat, R. P. (2016) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2016.07.014 · Cited by 79
Microbiological Sensing Technologies: A Review
Abbasian, F., Ghafar‐Zadeh, E., & Magierowski, S. (2018) · Bioengineering · doi:10.3390/bioengineering5010020 · Cited by 77
Integrating Fiber Optic Strain Sensors into Metal Using Ultrasonic Additive Manufacturing
Hehr, A., Norfolk, M., Wenning, J., Sheridan, J. T., Leser, P., Leser, P. E., & Newman, J. A. (2017) · JOM · doi:10.1007/s11837-017-2709-8 · Cited by 76
3D printed conformal microfluidics for isolation and profiling of biomarkers from whole organs
Singh, M., Tong, Y., Webster, K., Cesewski, E., Haring, A. P., Laheri, S., Carswell, B., O’Brien, T. J., Aardema, C. H., Senger, R. S., et al. (2017) · Lab on a Chip · doi:10.1039/c7lc00468k · Cited by 75
3D-printed miniature gas cell for photoacoustic spectroscopy of trace gases
Bauer, R., Stewart, G. A., Johnstone, W., Boyd, E., & Lengden, M. (2014) · Optics Letters · doi:10.1364/ol.39.004796 · Cited by 74
Adding Biomolecular Recognition Capability to 3D Printed Objects
Mandon, C. A., Blum, L. J., & Marquette, C. A. (2016) · Analytical Chemistry · doi:10.1021/acs.analchem.6b03426 · Cited by 74
Mulberry paper-based graphene strain sensor for wearable electronics with high mechanical strength
Qi, X., Li, X., Jo, H., Bhat, K. S., Kim, S., An, J., Kang, J., & Lim, S. (2019) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2019.111697 · Cited by 74
Takenaga, S., Schneider, B., Erbay, E., Biselli, M., Schnitzler, T., Schöning, M. J., & Wagner, T. (2015) · physica status solidi (a) · doi:10.1002/pssa.201532053 · Cited by 72
Suaste-Gómez, E., Rodríguez-Roldán, G., Reyes-Cruz, H., & Terán-Jiménez, O. (2016) · Sensors · doi:10.3390/s16030332 · Cited by 70
Recent advances in non-contact force sensors used for micro/nano manipulation
Zang, H., Zhang, X., Zhu, B., & Fatikow, S. (2019) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2019.07.007 · Cited by 70
Khamis, H., Xia, B., & Redmond, S. J. (2019) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2019.03.051 · Cited by 65
Su, C., Yen, S.-C., Li, T.-W., & Sun, Y. (2016) · Analytical Chemistry · doi:10.1021/acs.analchem.6b00272 · Cited by 61
Autonomous Chemical Sensing Interface for Universal Cell Phone Readout
Cómina, G., Suska, A., & Filippini, D. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201503727 · Cited by 59
3D-Printed Microfluidic Microdissector for High-Throughput Studies of Cellular Aging
Spivey, E. C., Xhemalçe, B., Shear, J. B., & Finkelstein, I. J. (2014) · Analytical Chemistry · doi:10.1021/ac500893a · Cited by 58
Three-Dimensional Printing Based Hybrid Manufacturing of Microfluidic Devices
Alapan, Y., Hasan, M. N., Shen, R., & Gurkan, U. A. (2015) · Journal of Nanotechnology in Engineering and Medicine · doi:10.1115/1.4031231 · Cited by 56
Disposable electrochemical sensor prepared using 3D printing for cell and tissue diagnostics
Ragones, H., Schreiber, D. S., Inberg, A., Berkh, O., Kósa, G., Freeman, A., & Shacham‐Diamand, Y. (2015) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2015.04.065 · Cited by 55
Electrochemiluminescence at Bare and DNA-Coated Graphite Electrodes in 3D-Printed Fluidic Devices
Bishop, G. W., Satterwhite-Warden, J. E., Bist, I., Chen, E., & Rusling, J. F. (2015) · ACS Sensors · doi:10.1021/acssensors.5b00156 · Cited by 55
Amicromachined active tactile sensor for hardness detection
Hasegawa, Y., Shikida, M., Shimizu, T., Miyaji, T., Sasaki, H., Kazuo, S., & Itoigawa, K. (2004) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2003.11.038 · Cited by 54
Vatani, M., Engeberg, E. D., & Choi, J. (2014) · Additive manufacturing · doi:10.1016/j.addma.2014.12.009 · Cited by 54
3D printed microfluidic device with integrated optical sensing for particle analysis
Hampson, S. M., Rowe, W., Christie, S. D. R., & Platt, M. (2017) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2017.10.041 · Cited by 53
Gao, Y., Xu, M., Yu, G., Tan, J., & Xuan, F. (2019) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2019.111625 · Cited by 43
Sajid, M., Gul, J. Z., Kim, S. W., Kim, H. B., Na, K. H., & Choi, K. H. (2018) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2017.0092 · Cited by 42
Low-temperature-solderable intermetallic nanoparticles for 3D printable flexible electronics
Zhong, Y., An, R., Ma, H., & Wang, C. (2018) · Acta Materialia · doi:10.1016/j.actamat.2018.09.069 · Cited by 42
Hogaboam, L., & Daim, T. U. (2018) · Health Policy and Technology · doi:10.1016/j.hlpt.2018.10.011 · Cited by 40
Wang, Y., Wang, Y., Liu, W., Chen, D., Wu, C., & Xie, J. (2019) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2019.01.013 · Cited by 38
Ude, C., Hentrop, T., Lindner, P., Lücking, T. H., Scheper, T. H., & Beutel, S. (2015) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2015.07.017 · Cited by 36
Yafia, M., Ahmadi, A., Hoorfar, M., & Najjaran, H. (2015) · Micromachines · doi:10.3390/mi6091289 · Cited by 36
Paz‐Buclatin, F., Rivera‐López, F., González, O., Martin, I. R., Martín, L. L., & Jovanović, D. J. (2019) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2019.111628 · Cited by 36
High-performance temperature sensor based on silver nanowires
Li, S., Liu, D., Tian, N., Liang, Y., Gao, C., Wang, S., & Zhang, Y. (2019) · Materials Today Communications · doi:10.1016/j.mtcomm.2019.100546 · Cited by 34
Pol, R., Céspedes, F., Gabriel, D., & Baeza, M. (2019) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2019.03.132 · Cited by 32
Reel-to-reel fabrication of strain sensing threads and realization of smart insole
Alaimo, F., Sadeqi, A., Nejad, H. R., Jiang, Y., Wang, W., Demarchi, D., & Sonkusale, S. (2019) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2019.111741 · Cited by 30
Jahangir, M. N., Cleeman, J., Hwang, H.-J., & Malhotra, R. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.100886 · Cited by 29
Dantism, S., Takenaga, S., Wagner, P., Wagner, T., & Schöning, M. J. (2016) · physica status solidi (a) · doi:10.1002/pssa.201533043 · Cited by 22
Single-Nanowire strain sensors fabricated by nanoskiving
Jibril, L., Ramírez, J., Zaretski, A. V., & Lipomi, D. J. (2017) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2017.07.046 · Cited by 22
Wearable transcutaneous oxygen sensor for health monitoring
Lim, C.-J., & Park, J. (2019) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2019.111607 · Cited by 16
Study and tailoring of screen-printed resistive films for disposable strain gauges
Subramanya, S. B., Neella, N., Anantha Prasad, M. G., & Nayak, M. M. (2019) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2019.06.008 · Cited by 13
Processing Issues and the Characterization of Soft Electrochemical 3D Sensor
Ragones, H., Schreiber, D. S., Inberg, A., Berkh, O., Kósa, G., & Shacham‐Diamand, Y. (2015) · Electrochimica Acta · doi:10.1016/j.electacta.2015.04.109 · Cited by 11
Cited by
Progress and challenges in fabrication of wearable sensors for health monitoring
Nasiri, S., & Khosravani, M. R. (2020) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2020.112105 · Cited by 295
Self-citationKanoun, O., Bouhamed, A., Ramalingame, R., Bautista-Quijano, J. R., Rajendran, D., & Al-Hamry, A. (2021) · Sensors · doi:10.3390/s21020341 · Cited by 295
On the environmental impacts of 3D printing technology
Khosravani, M. R., & Reinicke, T. (2020) · Applied Materials Today · doi:10.1016/j.apmt.2020.100689 · Cited by 284
Self-citationMachine learning in predicting mechanical behavior of additively manufactured parts
Nasiri, S., & Khosravani, M. R. (2021) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2021.07.004 · Cited by 202
Self-citation
Metadata
- Authors
- Khosravani, M. R., & Reinicke, T.
- Venue
- Sensors and Actuators A: Physical
- Publisher
- Elsevier BV
- Published
- 2020-04
- Volume
- 305
- Pages
- 111916
- ISSN
- 0924-4247 (ISSN-L)
- OpenAlex
- W3007235325
- Cited by
- 331
- References
- 128
- FWCI
- 17.07
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.