The DOI matches its Crossref record; 116 of the 116 references it cites were found in a registry or an index.
Biofabrication: A Guide to Technology and Terminology
Open accessAbstract
Biofabrication holds the potential to generate constructs that more closely recapitulate the complexity and heterogeneity of tissues and organs than do currently available regenerative medicine therapies. Such constructs can be applied for tissue regeneration or as in vitro 3D models. Biofabrication is maturing and growing, and scientists with different backgrounds are joining this field, underscoring the need for unity regarding the use of terminology. We therefore believe that there is a compelling need to clarify the relationship between the different concepts, technologies, and descriptions of biofabrication that are often used interchangeably or inconsistently in the current literature. Our objective is to provide a guide to the terminology for different technologies in the field which may serve as a reference for the biofabrication community.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A method for registration of 3-D shapes
Besl, P. J., & McKay, N. D. (1992) · IEEE Transactions on Pattern Analysis and Machine Intelligence · doi:10.1109/34.121791 · Cited by 18,103
Reconstituting organ-level lung functions on a chip
Huh, D., Matthews, B. D., Mammoto, A., Montoya-Zavala, M., Hsin, H. Y., & Ingber, D. E. (2010) · Science · doi:10.1126/science.1188302 · Cited by 4,250
Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A. (2016) · Nature Materials · doi:10.1038/nmat4544 · Cited by 3,027
The effect of processing variables on the morphology of electrospun nanofibers and textiles
Deitzel, J. M., Kleinmeyer, J., Harris, D., & Beck Tan, N. C. (2001) · Polymer · doi:10.1016/s0032-3861(00)00250-0 · Cited by 2,915
The status, challenges, and future of additive manufacturing in engineering
Gao, W., Zhang, Y., Ramanujan, D., Ramani, K., Chen, Y., Williams, C. B., Wang, C. C. L., Shin, Y. C., Zhang, S., & Zavattieri, P. D. (2015) · Computer-Aided Design · doi:10.1016/j.cad.2015.04.001 · Cited by 2,631
Continuous liquid interface production of 3D objects
Tumbleston, J. R., Shirvanyants, D., Ermoshkin, N., Janusziewicz, R., Johnson, A. R., Kelly, D., Chen, K., Pinschmidt, R., Rolland, J. P., Ermoshkin, A., et al. (2015) · Science · doi:10.1126/science.aaa2397 · Cited by 2,278
3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs
Kolesky, D. B., Truby, R. L., Gladman, A. S., Busbee, T. A., Homan, K. A., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201305506 · Cited by 2,102
Rapid casting of patterned vascular networks for perfusable engineered three-dimensional tissues
Miller, J. S., Stevens, K. R., Yang, M. T., Baker, B. M., Nguyen, D.-H. T., Cohen, D. M., Toro, E., Chen, A. A., Galie, P. A., Yu, X., et al. (2012) · Nature Materials · doi:10.1038/nmat3357 · Cited by 1,917
Printing three-dimensional tissue analogues with decellularized extracellular matrix bioink
Pati, F., Jang, J., Ha, D.-H., Won Kim, S., Rhie, J.-W., Shim, J.-H., Kim, D.-H., & Cho, D.-W. (2014) · Nature Communications · doi:10.1038/ncomms4935 · Cited by 1,904
25th Anniversary Article: Engineering Hydrogels for Biofabrication
Malda, J., Visser, J., Melchels, F. P., Jüngst, T., Hennink, W. E., Dhert, W. J. A., Groll, J., & Hutmacher, D. W. (2013) · Advanced Materials · doi:10.1002/adma.201302042 · Cited by 1,901
Self-citationHinton, T. J., Jallerat, Q., Palchesko, R. N., Park, J. H., Grodzicki, M. S., Shue, H.-J., Ramadan, M. H., Hudson, A. R., & Feinberg, A. W. (2015) · Science Advances · doi:10.1126/sciadv.1500758 · Cited by 1,805
Bone tissue engineering using polycaprolactone scaffolds fabricated via selective laser sintering
Williams, J. M., Adewunmi, A., Schek, R. M., Flanagan, C. L., Krebsbach, P. H., Feinberg, S. E., Hollister, S. J., & Das, S. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.11.057 · Cited by 1,563
Design properties of hydrogel tissue-engineering scaffolds
Zhu, J., & Marchant, R. E. (2011) · Expert Review of Medical Devices · doi:10.1586/erd.11.27 · Cited by 1,430
A completely biological tissue-engineered human blood vessel
L'heureux, N., Pâquet, S., Labbé, R., Germain, L., & Auger, F. A. (1998) · The FASEB Journal · doi:10.1096/fasebj.12.1.47 · Cited by 1,402
Scaffold-free vascular tissue engineering using bioprinting
Norotte, C., Marga, F. S., Niklason, L. E., & Forgacs, G. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.06.034 · Cited by 1,339
Self-citationAdditive manufacturing of tissues and organs
Melchels, F. P. W., Domingos, M. A. N., Klein, T. J., Malda, J., Bartolo, P. J., & Hutmacher, D. W. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.11.007 · Cited by 1,213
Self-citation4D Printing: Multi‐Material Shape Change
Tibbits, S. (2014) · Architectural Design · doi:10.1002/ad.1710 · Cited by 1,188
Direct 3D Printing of Shear‐Thinning Hydrogels into Self‐Healing Hydrogels
Highley, C. B., Rodell, C. B., & Burdick, J. A. (2015) · Advanced Materials · doi:10.1002/adma.201501234 · Cited by 1,043
Self-citationMetre-long cell-laden microfibres exhibit tissue morphologies and functions
Onoe, H., Okitsu, T., Itou, A., Kato-Negishi, M., Gojo, R., Kiriya, D., Sato, K., Miura, S., Iwanaga, S., Kuribayashi-Shigetomi, K., et al. (2013) · Nature Materials · doi:10.1038/nmat3606 · Cited by 860
Self-citationBlaeser, A., Duarte Campos, D. F., Puster, U., Richtering, W., Stevens, M. M., & Fischer, H. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201500677 · Cited by 808
Direct writing by way of melt electrospinning
Brown, T. D., Dalton, P. D., & Hutmacher, D. W. (2011) · Advanced Materials · doi:10.1002/adma.201103482 · Cited by 800
Schuurman, W., Levett, P. A., Pot, M. W., van Weeren, P. R., Dhert, W. J. A., Hutmacher, D. W., Melchels, F. P. W., Klein, T. J., & Malda, J. (2013) · Macromolecular Bioscience · doi:10.1002/mabi.201200471 · Cited by 790
Self-citationBiofabrication: reappraising the definition of an evolving field
Groll, J., Boland, T., Blunk, T., Burdick, J. A., Cho, D.-W., Dalton, P. D., Derby, B., Forgacs, G., Li, Q., Mironov, V. A., et al. (2016) · Biofabrication · doi:10.1088/1758-5090/8/1/013001 · Cited by 731
Self-citationStrategies and Molecular Design Criteria for 3D Printable Hydrogels
Jungst, T., Smolan, W., Schacht, K., Scheibel, T., & Groll, J. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00303 · Cited by 712
Self-citationHockaday, L. A., Kang, K. H., Colangelo, N. W., Cheung, P. Y. C., Duan, B., Malone, E., Wu, J., Girardi, L. N., Bonassar, L. J., Lipson, H., et al. (2012) · Biofabrication · doi:10.1088/1758-5082/4/3/035005 · Cited by 683
Advanced Bioinks for 3D Printing: A Materials Science Perspective
Chimene, D., Lennox, K. K., Kaunas, R. R., & Gaharwar, A. K. (2016) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1638-y · Cited by 679
Gauvin, R., Chen, Y.-C., Lee, J. W., Soman, P., Zorlutuna, P., Nichol, J. W., Bae, H., Chen, S., & Khademhosseini, A. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2012.01.048 · Cited by 641 · cited 6×
“In case of DLP, the RTM ratio can be increased to 2 (cid:6) 10 (cid:4) 3 m 2 / minute by parallelization of the light beam.”
InfluentialWriting in the granular gel medium
Bhattacharjee, T., Zehnder, S. M., Rowe, K. G., Jain, S., Nixon, R. M., Sawyer, W. G., & Angelini, T. E. (2015) · Science Advances · doi:10.1126/sciadv.1500655 · Cited by 635
Wang, Z., Abdulla, R., Parker, B., Samanipour, R., Ghosh, S., & Kim, K. (2015) · Biofabrication · doi:10.1088/1758-5090/7/4/045009 · Cited by 633
Cell sheet engineering: Recreating tissues without biodegradable scaffolds
Yang, J., Yamato, M., Kohno, C., Nishimoto, A., Sekine, H., Fukai, F., & Okano, T. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.04.061 · Cited by 626
Landers, R., Hübner, U., Schmelzeisen, R., & Mülhaupt, R. (2002) · Biomaterials · doi:10.1016/s0142-9612(02)00139-4 · Cited by 624
Woodfield, T. B. F., Malda, J., de Wijn, J., Péters, F., Riesle, J., & van Blitterswijk, C. A. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2003.10.056 · Cited by 618
Self-citationA Tissue-Like Printed Material
Villar, G., Graham, A. D., & Bayley, H. (2013) · Science · doi:10.1126/science.1229495 · Cited by 613
A three-dimensional osteochondral composite scaffold for articular cartilage repair
Sherwood, J. K., Riley, S. L., Palazzolo, R., Brown, S. C., Monkhouse, D. C., Coates, M., Griffith, L. G., Landeen, L. K., & Ratcliffe, A. (2002) · Biomaterials · doi:10.1016/s0142-9612(02)00223-5 · Cited by 610
Mechanical and in vivo performance of hydroxyapatite implants with controlled architectures
Chu, T.-M. G., Orton, D. G., Hollister, S. J., Feinberg, S. E., & Halloran, J. W. (2002) · Biomaterials · doi:10.1016/s0142-9612(01)00243-5 · Cited by 554
Moroni, L., de Wijn, J. R., & van Blitterswijk, C. A. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2005.07.023 · Cited by 534
Self-citationCreating perfused functional vascular channels using 3D bio-printing technology
Lee, V. K., Kim, D. Y., Ngo, H., Lee, Y., Seo, L., Yoo, S.-S., Vincent, P. A., & Dai, G. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2014.05.083 · Cited by 494
Faulkner-Jones, A., Fyfe, C., Cornelissen, D.-J., Gardner, J., King, J., Courtney, A., & Shu, W. (2015) · Biofabrication · doi:10.1088/1758-5090/7/4/044102 · Cited by 474
Self-citationA poly(d,l-lactide) resin for the preparation of tissue engineering scaffolds by stereolithography
Melchels, F. P. W., Feijen, J., & Grijpma, D. W. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.03.055 · Cited by 437
Mechanical properties of dense polylactic acid structures fabricated by three dimensional printing
GIORDANO, R. A., Wu, B. M., Borland, S. W., Cima, L. G., Sachs, E. M., & Cima, M. J. (1997) · Journal of Biomaterials Science, Polymer Edition · doi:10.1163/156856297x00588 · Cited by 413
Bioprinting of hybrid tissue constructs with tailorable mechanical properties
Schuurman, W., Khristov, V, Pot, M. W., van Weeren, P. R., Dhert, W. J. A., & Malda, J. (2011) · Biofabrication · doi:10.1088/1758-5082/3/2/021001 · Cited by 409
Self-citationFedorovich, N. E., Schuurman, W., Wijnberg, H. M., Prins, H.-J., van Weeren, P. R., Malda, J., Alblas, J., & Dhert, W. J. A. (2012) · Tissue Engineering Part C: Methods · doi:10.1089/ten.tec.2011.0060 · Cited by 403
Self-citationBashur, C. A., Dahlgren, L. A., & Goldstein, A. S. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.07.005 · Cited by 395
A cell-laden microfluidic hydrogel
Ling, Y., Rubin, J., Deng, Y., Huang, C., Demirci, U., Karp, J. M., & Khademhosseini, A. (2007) · Lab on a Chip · doi:10.1039/b615486g · Cited by 395
Engineering biological structures of prescribed shape using self-assembling multicellular systems
Jakab, K., Neagu, A., Mironov, V., Markwald, R. R., & Forgacs, G. (2004) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0400164101 · Cited by 394
Self-citationReconfigurable microfluidic hanging drop network for multi-tissue interaction and analysis
Frey, O., Misun, P. M., Fluri, D. A., Hengstler, J. G., & Hierlemann, A. (2014) · Nature Communications · doi:10.1038/ncomms5250 · Cited by 387
Additive manufacturing of scaffolds with sub-micron filaments via melt electrospinning writing
Hochleitner, G., Jüngst, T., Brown, T. D., Hahn, K., Moseke, C., Jakob, F., Dalton, P. D., & Groll, J. (2015) · Biofabrication · doi:10.1088/1758-5090/7/3/035002 · Cited by 385
Self-citationAdditive manufacturing techniques for the production of tissue engineering constructs
Mota, C., Puppi, D., Chiellini, F., & Chiellini, E. (2015) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.1635 · Cited by 382
Self-citationCell and organ printing 2: Fusion of cell aggregates in three‐dimensional gels
Boland, T., Mironov, V., Gutowska, A., Roth, E. A., & Markwald, R. R. (2003) · The Anatomical Record Part A: Discoveries in Molecular, Cellular, and Evolutionary Biology · doi:10.1002/ar.a.10059 · Cited by 382
Self-citationNguyen, D. G., Funk, J., Robbins, J. B., Crogan-Grundy, C., Presnell, S. C., Singer, T., & Roth, A. B. (2016) · PLOS ONE · doi:10.1371/journal.pone.0158674 · Cited by 379
Tissue Engineering by Self-Assembly of Cells Printed into Topologically Defined Structures
Jakab, K., Norotte, C., Damon, B., Marga, F., Neagu, A., Besch-Williford, C. L., Kachurin, A., Church, K. H., Park, H., Mironov, V., et al. (2008) · Tissue Engineering Part A · doi:10.1089/tea.2007.0173 · Cited by 378
Self-citationPatterning human stem cells and endothelial cells with laser printing for cardiac regeneration
Gaebel, R., Ma, N., Liu, J., Guan, J., Koch, L., Klopsch, C., Gruene, M., Toelk, A., Wang, W., Mark, P., et al. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2011.08.071 · Cited by 351
Novel collagen scaffolds with predefined internal morphology made by solid freeform fabrication
Sachlos, E. (2003) · Biomaterials · doi:10.1016/s0142-9612(02)00528-8 · Cited by 350
Toward engineering functional organ modules by additive manufacturing
Marga, F., Jakab, K., Khatiwala, C., Shepherd, B., Dorfman, S., Hubbard, B., Colbert, S., & Gabor, F. (2012) · Biofabrication · doi:10.1088/1758-5082/4/2/022001 · Cited by 348
Biomatrices and biomaterials for future developments of bioprinting and biofabrication
Nakamura, M., Iwanaga, S., Henmi, C., Arai, K., & Nishiyama, Y. (2010) · Biofabrication · doi:10.1088/1758-5082/2/1/014110 · Cited by 311
Self-citationItoh, M., Nakayama, K., Noguchi, R., Kamohara, K., Furukawa, K., Uchihashi, K., Toda, S., Oyama, J.-I., Node, K., & Morita, S. (2015) · PLOS ONE · doi:10.1371/journal.pone.0136681 · Cited by 299
Laser Printing of Pluripotent Embryonal Carcinoma Cells
Ringeisen, B. R., Kim, H., Barron, J. A., Krizman, D. B., Chrisey, D. B., Jackman, S., Auyeung, R. Y. C., & Spargo, B. J. (2004) · Tissue Engineering · doi:10.1089/107632704323061843 · Cited by 295
Untethered micro-robotic coding of three-dimensional material composition
Tasoglu, S., Diller, E., Guven, S., Sitti, M., & Demirci, U. (2014) · Nature Communications · doi:10.1038/ncomms4124 · Cited by 293
Jayasinghe, S. N., Qureshi, A., & Eagles, P. A. M. (2005) · Small · doi:10.1002/smll.200500291 · Cited by 286
Pfister, A., Landers, R., Laib, A., Hübner, U., Schmelzeisen, R., & Mülhaupt, R. (2004) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.10807 · Cited by 284
DNA-directed self-assembly of shape-controlled hydrogels
Qi, H., Ghodousi, M., Du, Y., Grun, C., Bae, H., Yin, P., & Khademhosseini, A. (2013) · Nature Communications · doi:10.1038/ncomms3275 · Cited by 280
Self-assembled micro-organogels for 3D printing silicone structures
O’Bryan, C. S., Bhattacharjee, T., Hart, S., Kabb, C. P., Schulze, K. D., Chilakala, I., Sumerlin, B. S., Sawyer, W. G., & Angelini, T. E. (2017) · Science Advances · doi:10.1126/sciadv.1602800 · Cited by 277
Woodfield, T. B. F., Blitterswijk, C. A. V., Wijn, J. D., Sims, T. J., Hollander, A. P., & Riesle, J. (2005) · Tissue Engineering · doi:10.1089/ten.2005.11.1297 · Cited by 275
Self-citationTissue Engineering by Self-Assembly of Cells Printed into Topologically Defined Structures
Jakab, K., Norotte, C., Damon, B., Marga, F., Neagu, A., Besch-Williford, C. L., Kachurin, A., Church, K. H., Park, H., Mironov, V., et al. (2007) · Tissue Engineering · doi:10.1089/ten.2007.0173 · Cited by 273
Self-citationGuillemot, F., Souquet, A., Catros, S., & Guillotin, B. (2010) · Nanomedicine · doi:10.2217/nnm.10.14 · Cited by 268
Concentrated hydroxyapatite inks for direct-write assembly of 3-D periodic scaffolds
Michna, S., Wu, W., & Lewis, J. A. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.02.040 · Cited by 266
Vozzi, G., Previti, A., De Rossi, D., & Ahluwalia, A. (2002) · Tissue Engineering · doi:10.1089/107632702320934182 · Cited by 249
Self-citationZhou, W. Y., Lee, S. H., Wang, M., Cheung, W. L., & Ip, W. Y. (2008) · Journal of Materials Science: Materials in Medicine · doi:10.1007/s10856-007-3089-3 · Cited by 247
Essentials of 3D Biofabrication and Translation
(2015) · Elsevier eBooks · doi:10.1016/c2013-0-18665-5 · Cited by 234
Liver-cell patterning lab chip: mimicking the morphology of liver lobule tissue
Ho, C.-T., Lin, R.-Z., Chen, R.-J., Chin, C.-K., Gong, S.-E., Chang, H.-Y., Peng, H.-L., Hsu, L., Yew, T.-R., Chang, S.-F., et al. (2013) · Lab on a Chip · doi:10.1039/c3lc50402f · Cited by 230
Li, J. P., de Wijn, J. R., Van Blitterswijk, C. A., & de Groot, K. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2005.08.033 · Cited by 226
Biomanufacturing: history and perspective
Zhang, Y.-H. P., Sun, J., & Ma, Y. (2017) · Journal of Industrial Microbiology and Biotechnology · doi:10.1007/s10295-016-1863-2 · Cited by 226
Faulkner-Jones, A., Greenhough, S., A King, J., Gardner, J., Courtney, A., & Shu, W. (2013) · Biofabrication · doi:10.1088/1758-5082/5/1/015013 · Cited by 212
Self-citationSelective laser sintering of biocompatible polymers for applications in tissue engineering
Tan, K. H., Chua, C. K., Leong, K. F., Cheah, C. M., Gui, W. S., Tan, W. S., & Wiria, F. E. (2005) · Bio-Medical Materials and Engineering · doi:10.1177/0959298920050151-2012 · Cited by 207
Ovsianikov, A., Schlie, S., Ngezahayo, A., Haverich, A., & Chichkov, B. N. (2007) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.57 · Cited by 194
Simpson, R. L., Wiria, F. E., Amis, A. A., Chua, C. K., Leong, K. F., Hansen, U. N., Chandrasekaran, M., & Lee, M. W. (2008) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.30839 · Cited by 181
High‐Throughput Printing via Microvascular Multinozzle Arrays
Hansen, C. J., Saksena, R., Kolesky, D. B., Vericella, J. J., Kranz, S. J., Muldowney, G. P., Christensen, K. T., & Lewis, J. A. (2013) · Advanced Materials · doi:10.1002/adma.201203321 · Cited by 170
Tissue deformation spatially modulates VEGF signaling and angiogenesis
Rivron, N. C., Vrij, E. J., Rouwkema, J., Le Gac, S., van den Berg, A., Truckenmüller, R. K., & van Blitterswijk, C. A. (2012) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1201626109 · Cited by 165
A microfluidic system to evaluate intestinal absorption
Imura, Y., Asano, Y., Sato, K., & Yoshimura, E. (2009) · Analytical Sciences · doi:10.2116/analsci.25.1403 · Cited by 159
Yanez, M., Rincon, J., Dones, A., De Maria, C., Gonzales, R., & Boland, T. (2015) · Tissue Engineering Part A · doi:10.1089/ten.tea.2013.0561 · Cited by 158
Self-citationHydrogel systems for barriers and local drug delivery in the control of wound healing
Hubbell, J. A. (1996) · Journal of Controlled Release · doi:10.1016/0168-3659(95)00162-x · Cited by 151
High-aspect 3D two-photon polymerization structuring with widened objective working range (WOW-2PP)
Obata, K., El-Tamer, A., Koch, L., Hinze, U., & Chichkov, B. N. (2013) · Light Science & Applications · doi:10.1038/lsa.2013.72 · Cited by 150
Three-dimensional printing with sacrificial materials for soft matter manufacturing
O’Bryan, C. S., Bhattacharjee, T., Niemi, S. R., Balachandar, S., Baldwin, N., Ellison, S. T., Taylor, C. R., Sawyer, W. G., & Angelini, T. E. (2017) · MRS Bulletin · doi:10.1557/mrs.2017.167 · Cited by 150
Pore size and pore volume effects on alumina and TCP ceramic scaffolds
Bose, S., Darsell, J. T., Kintner, M., et al. (2002) · Materials Science and Engineering C · doi:10.1016/s0928-4931(02)00129-7 · Cited by 146
Laser Photoablation of Guidance Microchannels into Hydrogels Directs Cell Growth in Three Dimensions
Sarig-Nadir, O., Livnat, N., Zajdman, R., Shoham, S., & Seliktar, D. (2009) · Biophysical Journal · doi:10.1016/j.bpj.2009.03.019 · Cited by 143
Ji, Y., Ghosh, K., Li, B., Sokolov, J. C., Clark, R. A. F., & Rafailovich, M. H. (2006) · Macromolecular Bioscience · doi:10.1002/mabi.200600132 · Cited by 137
Schantz, J., Brandwood, A., Hutmacher, D. W., Khor, H. L., & Bittner, K. (2005) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-005-3584-3 · Cited by 136
Антонов, Е. Н., Bagratashvili, V. N., Whitaker, M. J., Barry, J. J. A., Shakesheff, K. M., Коновалов, А. Н., Popov, V. K., & Howdle, S. M. (2004) · Advanced Materials · doi:10.1002/adma.200400838 · Cited by 136
Additive manufacturing of wet-spun polymeric scaffolds for bone tissue engineering
Puppi, D., Mota, C., Gazzarri, M., Dinucci, D., Gloria, A., Myrzabekova, M., Ambrosio, L., & Chiellini, E. (2012) · Biomedical Microdevices · doi:10.1007/s10544-012-9677-0 · Cited by 131
Self-citationHoque, M. E., Hutmacher, D. W., Feng, W., Li, S., Huang, M., Vert, M., & Wong, Y. S. (2005) · Journal of Biomaterials Science Polymer Edition · doi:10.1163/156856205774576709 · Cited by 127
Layered manufacturing of tissue engineering scaffolds via multi-nozzle deposition
Yan, Y., Xiong, Z., Hu, Y., et al. (2003) · Materials Letters · doi:10.1016/s0167-577x(02)01339-3 · Cited by 119
Three-dimensional tissue constructs built by bioprinting
Jakab, K., Damon, B. J., Neagu, A., Kachurin, A., & Forgács, G. (2006) · Biorheology · doi:10.1177/0006355x2006043003004033 · Cited by 114
Controlling cell position in complex heterotypic 3D microtissues by tissue fusion
Rago, A. P., Dean, D. M., & Morgan, J. R. (2008) · Biotechnology and Bioengineering · doi:10.1002/bit.22162 · Cited by 110
Micro‐Masonry: Construction of 3D Structures by Microscale Self‐Assembly
Fernandez, J. G., & Khademhosseini, A. (2010) · Advanced Materials · doi:10.1002/adma.200903893 · Cited by 109
Cell Electrospinning: An In Vitro and In Vivo Study
Sampson, S. L., Saraiva, L., Gustafsson, K., et al. (2013) · Small · doi:10.1002/smll.201300804 · Cited by 96
Blaeser, A., Campos, D. F. D., Weber, M. H., Neuß, S., Theek, B., Fischer, H., & Jahnen‐Dechent, W. (2013) · BioResearch open access · doi:10.1089/biores.2013.0031 · Cited by 95
Shin, M. K., Kim, S. K., & Jung, H. (2011) · Lab on a Chip · doi:10.1039/c1lc20671k · Cited by 94
Leferink, A., Schipper, D. J., Arts, E., Vrij, E., Rivron, N. C., Karperien, M., Mittmann, K., van Blitterswijk, C., Moroni, L., & Truckenmüller, R. K. (2014) · Advanced Materials · doi:10.1002/adma.201304539 · Cited by 94
Self-citationCell Patterning by Laser-Assisted Bioprinting
Devillard, R., Pagès, E., Correa, M. M., Kériquel, V., Rémy, M., Kalisky, J., Ali, M., Guillotin, B., & Guillemot, F. (2014) · Methods in cell biology · doi:10.1016/b978-0-12-416742-1.00009-3 · Cited by 91
Hutmacher, D. W., Ng, K. W., Kaps, C., Sittinger, M., & Kläring, S. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00350-8 · Cited by 89
Hydrated versus lyophilized forms of porcine extracellular matrix derived from the urinary bladder
Freytes, D. O., Tullius, R. S., Valentin, J. E., Stewart‐Akers, A. M., & Badylak, S. F. (2008) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.31821 · Cited by 88
A droplet-based building block approach for bladder smooth muscle cell (SMC) proliferation
Xu, F., Moon, S., Emre, A. E., Emre, E. S. T., Song, Y. S., Hacking, S. A., Nagatomi, J., & Demirci, U. (2010) · Biofabrication · doi:10.1088/1758-5082/2/1/014105 · Cited by 83
Murata, D., Tokunaga, S., Tamura, T., et al. (2015) · Journal of Orthopaedic Surgery and Research · doi:10.1186/s13018-015-0173-0 · Cited by 81
Additive manufacturing in biomedical sciences and the need for definitions and norms
Chhaya, M. P., Poh, P. S. P., Balmayor, E. R., et al. (2015) · Expert Review of Medical Devices · doi:10.1586/17434440.2015.1059274 · Cited by 80
Point-, line-, and plane-shaped cellular constructs for 3D tissue assembly
Morimoto, Y., Hsiao, A. Y., & Takeuchi, S. (2015) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2015.09.003 · Cited by 75
Self-citationWater‐soluble photopolymers for rapid prototyping of cellular materials
Liska, R., Schwager, F., Maier, C., Cano‐Vives, R., & Stampfl, J. (2005) · Journal of Applied Polymer Science · doi:10.1002/app.22025 · Cited by 64
Franco, C. A., & Gerhardt, H. (2012) · Nature · doi:10.1038/488465a · Cited by 56
Carlberg, B., Wang, T., & Liu, J. (2010) · Langmuir · doi:10.1021/la9045447 · Cited by 52
ASTM international workshop on standards and measurements for tissue engineering scaffolds
Simon, C. G., Yaszemski, M. J., Ratcliffe, A., Tomlins, P., Luginbuehl, R., & Tesk, J. A. (2015) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.33286 · Cited by 50
Egami, M., Haraguchi, Y., Shimizu, T., Yamato, M., & Okano, T. (2013) · Archives of Pharmacal Research · doi:10.1007/s12272-013-0299-8 · Cited by 48
HANCOCK, M. J., Yanagawa, F., Jang, Y., He, J., Kachouie, N. N., Kaji, H., & Khademhosseini, A. (2011) · Small · doi:10.1002/smll.201101745 · Cited by 47
Tirella, A., Vozzi, F., Vozzi, G., & Ahluwalia, A. D. (2010) · Tissue Engineering Part C Methods · doi:10.1089/ten.tec.2010.0195 · Cited by 41
Self-citationJin, G., Lee, S., Kim, S.-H., Kim, M., & Jang, J. (2014) · Biomedical Microdevices · doi:10.1007/s10544-014-9883-z · Cited by 38
Three-Dimensional Microfabrication by Two-Photon Polymerization Technique
Ovsianikov, A., & Chichkov, B. N. (2012) · Methods in molecular biology · doi:10.1007/978-1-61779-764-4_19 · Cited by 30
High Throughput Screening with Biofabrication Platforms
Mota, C., & Moroni, L. (2015) · Elsevier eBooks · doi:10.1016/b978-0-12-800972-7.00011-6 · Cited by 13
Self-citationIn Vitro Vascularization of Human Connective Microtissues
Kelm, J. M., Moritz, W., Schmidt, D., Hoerstrup, S. P., & Fussenegger, M. (2007) · Methods in molecular medicine · doi:10.1007/978-1-59745-443-8_9 · Cited by 12
Cited by
Printability and shape fidelity of bioinks in 3D bioprinting
Schwab, A., Levato, R., D’Este, M., Piluso, S., Eglin, D., & Malda, J. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00084 · Cited by 1,359
Self-citation3D printing of hydrogels: Rational design strategies and emerging biomedical applications
Li, J., Wu, C., Chu, P. K., & Gelinsky, M. (2020) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100543 · Cited by 862
A definition of bioinks and their distinction from biomaterial inks
Groll, J., Burdick, J. A., Cho, D.-W., Derby, B., Gelinsky, M., Heilshorn, S. C., Jüngst, T., Malda, J., Mironov, V. A., Nakayama, K., et al. (2018) · Biofabrication · doi:10.1088/1758-5090/aaec52 · Cited by 797
Self-citationBiofabrication strategies for 3D in vitro models and regenerative medicine
Moroni, L., Burdick, J. A., Highley, C., Lee, S. J., Morimoto, Y., Takeuchi, S., & Yoo, J. J. (2018) · Nature Reviews Materials · doi:10.1038/s41578-018-0006-y · Cited by 753
Self-citationInkjet Bioprinting of Biomaterials
Li, X., Liu, B., Pei, B., Chen, J., Zhou, D., Peng, J., Zhang, X., Jia, W., & Xu, T. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00008 · Cited by 686
Self-citation
Metadata
- Authors
- Moroni, L., Boland, T., Burdick, J. A., De Maria, C., Derby, B., Forgacs, G., Groll, J., Li, Q., Malda, J., Mironov, V. A., Mota, C., Nakamura, M., Shu, W., Takeuchi, S., Woodfield, T. B. F., Xu, T., Yoo, J. J., & Vozzi, G.
- Venue
- Trends in Biotechnology
- Publisher
- Elsevier BV
- Published
- 2018-04
- Volume
- 36
- Issue
- 4
- Pages
- 384-402
- ISSN
- 0167-7799 (ISSN-L)
- OpenAlex
- W2767585628
- Cited by
- 636
- References
- 116
- FWCI
- 4.15
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.