The DOI matches its Crossref record; 233 of the 233 references it cites were found in a registry or an index.
From Materials to Cell: State-of-the-Art and Prospective Technologies for Lithium-Ion Battery Electrode Processing
Open accessAbstract
Electrode processing plays an important role in advancing lithium-ion battery technologies and has a significant impact on cell energy density, manufacturing cost, and throughput. Compared to the extensive research on materials development, however, there has been much less effort in this area. In this Review, we outline each step in the electrode processing of lithium-ion batteries from materials to cell assembly, summarize the recent progress in individual steps, deconvolute the interplays between those steps, discuss the underlying constraints, and share some prospective technologies. This Review aims to provide an overview of the whole process in lithium-ion battery fabrication from powder to cell formation and bridge the gap between academic development and industrial manufacturing.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Li-ion battery materials: present and future
Nitta, N., Wu, F., Lee, J. T., & Yushin, G. (2015) · Materials Today · doi:10.1016/j.mattod.2014.10.040 · Cited by 7,389
Electrolytes and Interphases in Li-Ion Batteries and Beyond
Xu, K. (2014) · Chemical Reviews · doi:10.1021/cr500003w · Cited by 5,566
A practical beginner’s guide to cyclic voltammetry
Elgrishi, N., Rountree, K. J., McCarthy, B. D., Rountree, E. S., Eisenhart, T. T., & Dempsey, J. L. (2018) · Journal of Chemical Education · doi:10.1021/acs.jchemed.7b00361 · Cited by 4,263
Recycling lithium-ion batteries from electric vehicles
Harper, G., Sommerville, R., Kendrick, E., Driscoll, L., Slater, P., Stolkin, R., Walton, A., Christensen, P., Heidrich, O., Lambert, S., et al. (2019) · Nature · doi:10.1038/s41586-019-1682-5 · Cited by 3,890
Electronically conductive phospho-olivines as lithium storage electrodes
Chung, S.-Y., Bloking, J. T., & Chiang, Y.-M. (2002) · Nature Materials · doi:10.1038/nmat732 · Cited by 2,939
Noh, H.-J., Youn, S., Yoon, C. S., & Sun, Y.-K. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.01.063 · Cited by 2,302
A review of the electrochemical performance of alloy anodes for lithium-ion batteries
Zhang, W.-J. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.07.020 · Cited by 2,140
An, S. J., Li, J., Daniel, C., Mohanty, D., Nagpure, S., & Wood, D. L. (2016) · Carbon · doi:10.1016/j.carbon.2016.04.008 · Cited by 2,121
Self-citationOptimized LiFePO[sub 4] for Lithium Battery Cathodes
Yamada, A., Chung, S. C., & Hinokuma, K. (2001) · Journal of The Electrochemical Society · doi:10.1149/1.1348257 · Cited by 1,867
(2004) · Choice Reviews Online · doi:10.5860/choice.42-1565 · Cited by 1,837
Recent advances in all-solid-state rechargeable lithium batteries
Sun, C., Liu, J., Gong, Y., Wilkinson, D. P., & Zhang, J. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.01.028 · Cited by 1,688
(2011) · Wiley eBooks · doi:10.1002/9780470872864 · Cited by 1,514
A review of recent developments in membrane separators for rechargeable lithium-ion batteries
Lee, H., Yanilmaz, M., Toprakci, O., Fu, K., & Zhang, X. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01432d · Cited by 1,467
Myung, S.-T., Maglia, F., Park, K.-J., Yoon, C. S., Lamp, P., Kim, S.-J., & Sun, Y.-K. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00594 · Cited by 1,382
High-voltage positive electrode materials for lithium-ion batteries
Li, W., Song, B., & Manthiram, A. (2017) · Chemical Society Reviews · doi:10.1039/c6cs00875e · Cited by 1,339
Duffner, F., Kronemeyer, N., Tübke, J., Leker, J., Winter, M., & Schmuch, R. (2021) · Nature Energy · doi:10.1038/s41560-020-00748-8 · Cited by 1,335
Asenbauer, J., Eisenmann, T., Kuenzel, M., Kazzazi, A., Chen, Z., & Bresser, D. (2020) · Sustainable Energy & Fuels · doi:10.1039/d0se00175a · Cited by 1,295
Nickel‐Rich and Lithium‐Rich Layered Oxide Cathodes: Progress and Perspectives
Manthiram, A., Knight, J. C., Myung, S., Oh, S., & Sun, Y. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201501010 · Cited by 1,202
Mewis, J., & Wagner, N. J. (2011) · Cambridge University Press eBooks · doi:10.1017/cbo9780511977978 · Cited by 1,142
Current status and challenges for automotive battery production technologies
Kwade, A., Haselrieder, W., Leithoff, R., Modlinger, A., Dietrich, F., & Droeder, K. (2018) · Nature Energy · doi:10.1038/s41560-018-0130-3 · Cited by 1,133
Electrode–Electrolyte Interface in Li-Ion Batteries: Current Understanding and New Insights
Gauthier, M., Carney, T. J., Grimaud, A., Giordano, L., Pour, N., Chang, H.-H., Fenning, D. P., Lux, S. F., Paschos, O., Bauer, C., et al. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b01727 · Cited by 1,028
Yan, P., Zheng, J., Gu, M., Xiao, J., Zhang, J.-G., & Wang, C.-M. (2017) · Nature Communications · doi:10.1038/ncomms14101 · Cited by 1,010
Zhan, C., Wu, T., Lu, J. B., & Amine, K. (2017) · Energy & Environmental Science · doi:10.1039/c7ee03122j · Cited by 1,006
On the use of vinylene carbonate (VC) as an additive to electrolyte solutions for Li-ion batteries
Aurbach, D., Gamolsky, K., Markovsky, B., Gofer, Y., Schmidt, M., & Heider, U. (2002) · Electrochimica Acta · doi:10.1016/s0013-4686(01)00858-1 · Cited by 992
Pinson, M. B., & Bazant, M. Z. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.044302jes · Cited by 946
Electrolyte additives for lithium ion battery electrodes: progress and perspectives
Haregewoin, A. M., Wotango, A. S., & Hwang, B.-J. (2016) · Energy Environ. Sci. · doi:10.1039/c6ee00123h · Cited by 907
The cathode–electrolyte interface in the Li-ion battery
Edström, K., Gustafsson, T., & Thomas, J. O. (2004) · Electrochimica Acta · doi:10.1016/j.electacta.2004.03.049 · Cited by 900
Lithium-ion batteries – Current state of the art and anticipated developments
Armand, M., Axmann, P., Bresser, D., Copley, M., Edström, K., Ekberg, C., Guyomard, D., Lestriez, B., Novák, P., Petranikova, M., et al. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.228708 · Cited by 888
Koerver, R., Zhang, W., de Biasi, L., Schweidler, S., Kondrakov, A. O., Kolling, S., Brezesinski, T., Hartmann, P., Zeier, W. G., & Janek, J. (2018) · Energy & Environmental Science · doi:10.1039/c8ee00907d · Cited by 872
Prospects for reducing the processing cost of lithium ion batteries
Wood, D. L., Li, J., & Daniel, C. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.11.019 · Cited by 827
Self-citationCharacterization and performance evaluation of lithium-ion battery separators
Lagadec, M. F., Zahn, R., & Wood, V. (2018) · Nature Energy · doi:10.1038/s41560-018-0295-9 · Cited by 812
Future generations of cathode materials: an automotive industry perspective
Andre, D., Kim, S.-J., Lamp, P., Lux, S. F., Maglia, F., Paschos, O., & Stiaszny, B. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta00361j · Cited by 806
Current and future lithium-ion battery manufacturing
Liu, Y., Zhang, R., Wang, J., & Wang, Y. (2021) · iScience · doi:10.1016/j.isci.2021.102332 · Cited by 763
Thermal stability of LixCoO2, LixNiO2 and λ-MnO2 and consequences for the safety of Li-ion cells
Dahn, J. R., FULLER, E., Obrovac, M. N., & VONSACKEN, U. (1994) · Solid State Ionics · doi:10.1016/0167-2738(94)90415-4 · Cited by 718
Andre, D., Meiler, M., Steiner, K., Wimmer, C., Soczka-Guth, T., & Sauer, D. U. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.12.102 · Cited by 703
Kondrakov, A. O., Schmidt, A., Xu, J., Geßwein, H., Mönig, R., Hartmann, P., Sommer, H., Brezesinski, T., & Janek, J. (2017) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.6b12885 · Cited by 701
Ren, D., Feng, X., Liu, L., Hsu, H., Lu, L., Wang, L., He, X., & Ouyang, M. (2021) · Energy Storage Materials · doi:10.1016/j.ensm.2020.10.020 · Cited by 698
THE CATHODE-ELECTROLYTE INTERFACE IN A Li-ION BATTERY
EDSTRÖM, K., GUSTAFSSON, T., & THOMAS, J. (2004) · Lithium-Ion Batteries · doi:10.1142/9781860946448_0008 · Cited by 651
All-solid-state lithium-ion and lithium metal batteries – paving the way to large-scale production
Schnell, J., Günther, T., Knoche, T., Vieider, C., Köhler, L., Just, A., Keller, M., Passerini, S., & Reinhart, G. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.02.062 · Cited by 646
Circular economy strategies for electric vehicle batteries reduce reliance on raw materials
Baars, J., Domenech, T., Bleischwitz, R., Melin, H. E., & Heidrich, O. (2020) · Nature Sustainability · doi:10.1038/s41893-020-00607-0 · Cited by 641
Bresser, D., Buchholz, D., Moretti, A., Varzi, A., & Passerini, S. (2018) · Energy & Environmental Science · doi:10.1039/c8ee00640g · Cited by 640
Who will drive electric vehicles, olivine or spinel?
Park, O. K., Cho, Y., Lee, S., et al. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00559b · Cited by 617
Du Pasquier, A., Plitz, I., Menocal, S., & Amatucci, G. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00718-8 · Cited by 588
Layered Li[Ni[sub x]Co[sub 1−2x]Mn[sub x]]O[sub 2] Cathode Materials for Lithium-Ion Batteries
Lu, Z., MacNeil, D. D., & Dahn, J. R. (2001) · Electrochemical and Solid-State Letters · doi:10.1149/1.1413182 · Cited by 586
Progress in electrolytes for rechargeable Li-based batteries and beyond
Li, Q., Chen, J., Fan, L., Kong, X., & Lu, Y. (2016) · Green Energy & Environment · doi:10.1016/j.gee.2016.04.006 · Cited by 569
Analysis of Vinylene Carbonate Derived SEI Layers on Graphite Anode
Ota, H., Sakata, Y., Inoue, A., & Yamaguchi, S. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1785795 · Cited by 553
A review of current collectors for lithium-ion batteries
Zhu, P., Gastol, D., Marshall, J., Sommerville, R., Goodship, V., & Kendrick, E. (2021) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.229321 · Cited by 523
The role of Li-ion battery electrolyte reactivity in performance decline and self-discharge
Sloop, S. E., Kerr, J. B., & Kinoshita, K. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(03)00149-6 · Cited by 517
A review of Ni-based layered oxides for rechargeable Li-ion batteries
Xu, J., Lin, F., Doeff, M. M., & Tong, W. (2017) · Journal of Materials Chemistry A · doi:10.1039/c6ta07991a · Cited by 517
Intergranular Cracking as a Major Cause of Long-Term Capacity Fading of Layered Cathodes
Liu, H., Wolfman, M., Karki, K., Yu, Y., Stach, E. A., Cabana, J., Chapman, K. W., & Chupas, P. J. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b00379 · Cited by 517
Yang, L., Ravdel, B., & Lucht, B. L. (2010) · Electrochemical and Solid-State Letters · doi:10.1149/1.3428515 · Cited by 508
Hu, Y.-S. (2016) · Nature Energy · doi:10.1038/nenergy.2016.42 · Cited by 440
Ren, D., Liu, X., Feng, X., Lu, L., Ouyang, M., Li, J., & He, X. (2018) · Applied Energy · doi:10.1016/j.apenergy.2018.06.126 · Cited by 438
Self-citationPasquier, A. D., Disma, F., Bowmer, T., Gozdz, A. S., Amatucci, G., & Tarascon, J. ‐. (1998) · Journal of The Electrochemical Society · doi:10.1149/1.1838287 · Cited by 436
Miller, D. J., Proff, C., Wen, J., Abraham, D. P., & Bareño, J. (2013) · Advanced Energy Materials · doi:10.1002/aenm.201300015 · Cited by 422
Structural Fatigue in Spinel Electrodes in High Voltage (4 V) Li/Li[sub x]Mn[sub 2]O[sub 4] Cells
Thackeray, M. M. (1999) · Electrochemical and Solid-State Letters · doi:10.1149/1.1390617 · Cited by 404
Advanced Separators for Lithium‐Ion and Lithium–Sulfur Batteries: A Review of Recent Progress
Xiang, Y., Li, J., Lei, J., Liu, D., Xie, Z., Qu, D., Li, K., Deng, T., & Tang, H. (2016) · ChemSusChem · doi:10.1002/cssc.201600943 · Cited by 404
Self-citationMaterials processing for lithium-ion batteries
Li, J., Daniel, C., & Wood, D. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.11.001 · Cited by 402
Self-citationElectrochemical behavior and passivation of current collectors in lithium-ion batteries
Myung, S.-T., Hitoshi, Y., & Sun, Y.-K. (2011) · Journal of Materials Chemistry · doi:10.1039/c0jm04353b · Cited by 402
High‐Nickel NMA: A Cobalt‐Free Alternative to NMC and NCA Cathodes for Lithium‐Ion Batteries
Li, W., Lee, S. S. W., & Manthiram, A. (2020) · Advanced Materials · doi:10.1002/adma.202002718 · Cited by 399
Compatibility issues between electrodes and electrolytes in solid-state batteries
Tian, Y., Shi, T., Richards, W. D., Li, J., Kim, J. C., Bo, S.-H., & Ceder, G. (2017) · Energy & Environmental Science · doi:10.1039/c7ee00534b · Cited by 396
Self-citationBai, Y., Muralidharan, N., Sun, Y.-K., Passerini, S., Stanley Whittingham, M., & Belharouak, I. (2020) · Materials Today · doi:10.1016/j.mattod.2020.09.001 · Cited by 385
Separators for Lithium‐Ion Batteries: A Review on the Production Processes and Recent Developments
Deimede, V., & Elmasides, C. (2015) · Energy Technology · doi:10.1002/ente.201402215 · Cited by 382
Structure and Electrochemistry of Li[Ni[sub x]Co[sub 1−2x]Mn[sub x]]O[sub 2] (0≤x≤1/2)
MacNeil, D. D., Lu, Z., & Dahn, J. R. (2002) · Journal of The Electrochemical Society · doi:10.1149/1.1505633 · Cited by 381
Electrode manufacturing for lithium-ion batteries—Analysis of current and next generation processing
Hawley, W. B., & Li, J. (2019) · Journal of Energy Storage · doi:10.1016/j.est.2019.100862 · Cited by 374
Self-citationOlivine LiFePO4: development and future
Wang, Y., He, P., & Zhou, H. (2011) · Energy Environ. Sci. · doi:10.1039/c0ee00176g · Cited by 372
Zhao, J., Lu, Z., Wang, H., Liu, W., Lee, H.-W., Yan, K., Zhuo, D., Lin, D., Liu, N., & Cui, Y. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b04526 · Cited by 369
El Ouatani, L., Dedryvère, R., Siret, C., Biensan, P., Reynaud, S., Iratçabal, P., & Gonbeau, D. (2009) · Journal of The Electrochemical Society · doi:10.1149/1.3029674 · Cited by 352
Toward Low-Cost, High-Energy Density, and High-Power Density Lithium-Ion Batteries
Li, J., Du, Z., Ruther, R. E., AN, S. J., David, L. A., Hays, K., Wood, M., Phillip, N. D., Sheng, Y., Mao, C., et al. (2017) · JOM · doi:10.1007/s11837-017-2404-9 · Cited by 350
Self-citationRecovery of cathode materials and Al from spent lithium-ion batteries by ultrasonic cleaning
He, L.-P., Sun, S.-Y., Song, X.-F., & Yu, J.-G. (2015) · Waste Management · doi:10.1016/j.wasman.2015.08.035 · Cited by 341
Li, W., Liu, X., Celio, H., Smith, P., Dolocan, A., Chi, M., & Manthiram, A. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201703154 · Cited by 339
Dynamics of Electrolyte Solutions
Wolynes, P. G. (1980) · Annual Review of Physical Chemistry · doi:10.1146/annurev.pc.31.100180.002021 · Cited by 338
Electrolyte Design for Fast-Charging Li-Ion Batteries
Logan, E. R., & Dahn, J. R. (2020) · Trends in Chemistry · doi:10.1016/j.trechm.2020.01.011 · Cited by 334
Failure mechanisms of single-crystal silicon electrodes in lithium-ion batteries
Shi, F., Song, Z., Ross, P. N., Somorjai, G. A., Ritchie, R. O., & Komvopoulos, K. (2016) · Nature Communications · doi:10.1038/ncomms11886 · Cited by 332
“Electrochemical Shock” of Intercalation Electrodes: A Fracture Mechanics Analysis
Woodford, W. H., Chiang, Y.-M., & Carter, W. C. (2010) · Journal of The Electrochemical Society · doi:10.1149/1.3464773 · Cited by 323
Li2CO3 in LiNi0.8Co0.15Al0.05O2 cathodes and its effects on capacity and power
Zhuang, G., Chen, G., Shim, J., Song, X., Ross, P. N., & Richardson, T. J. (2004) · Journal of Power Sources · doi:10.1016/j.jpowsour.2004.02.030 · Cited by 312
Du, Z., Wood, D. L., Daniel, C., Kalnaus, S., & Li, J. (2017) · Journal of Applied Electrochemistry · doi:10.1007/s10800-017-1047-4 · Cited by 310
Self-citationKraytsberg, A., & Ein‐Eli, Y. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600655 · Cited by 299
Kim, Y., Seong, W. M., & Manthiram, A. (2021) · Energy Storage Materials · doi:10.1016/j.ensm.2020.09.020 · Cited by 299
Choi, N.-S., Han, J.-G., Ha, S.-Y., Park, I., & Back, C.-K. (2015) · RSC Advances · doi:10.1039/c4ra11575a · Cited by 297
A review of the operating limits in slot die coating processes
Ding, X., Liu, J., & Harris, T. A. L. (2016) · AIChE Journal · doi:10.1002/aic.15268 · Cited by 294
Recent Progress in Research on High‐Voltage Electrolytes for Lithium‐Ion Batteries
Tan, S., Ji, Y. J., Zhang, Z. R., & Yang, Y. (2014) · ChemPhysChem · doi:10.1002/cphc.201402175 · Cited by 288
Technical and economic analysis of solvent-based lithium-ion electrode drying with water and NMP
Wood, D. L., Quass, J. D., Li, J., Ahmed, S., Ventola, D., & Daniel, C. (2018) · Drying Technology · doi:10.1080/07373937.2017.1319855 · Cited by 286
Self-citationSolvent-Free Manufacturing of Electrodes for Lithium-ion Batteries
Ludwig, B., Zheng, Z., Shou, W., Wang, Y., & Pan, H. (2016) · Scientific Reports · doi:10.1038/srep23150 · Cited by 280
State of health and charge measurements in lithium-ion batteries using mechanical stress
Cannarella, J., & Arnold, C. B. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.07.003 · Cited by 278
Shi, C., Zhang, P., Chen, L., Yang, P., & Zhao, J. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.07.142 · Cited by 276
A review on the stability and surface modification of layered transition-metal oxide cathodes
Kim, J.-M., Zhang, X., Zhang, J.-G., Manthiram, A., Meng, Y. S., & Xu, W. (2021) · Materials Today · doi:10.1016/j.mattod.2020.12.017 · Cited by 270
Wettability in electrodes and its impact on the performance of lithium-ion batteries
Jeon, D. H. (2019) · Energy storage materials · doi:10.1016/j.ensm.2019.01.002 · Cited by 268
A Bottom-Up Approach to Lithium-Ion Battery Cost Modeling with a Focus on Cathode Active Materials
Wentker, M., Greenwood, M., & Leker, J. (2019) · Energies · doi:10.3390/en12030504 · Cited by 268
Pieczonka, N. P. W., Borgel, V., Ziv, B., Leifer, N., Dargel, V., Aurbach, D., Kim, J., Liu, Z., Huang, X., Krachkovskiy, S. A., et al. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201501008 · Cited by 262
Cathode-Electrolyte Interphase in Lithium Batteries Revealed by Cryogenic Electron Microscopy
Zhang, Z., Yang, J., Huang, W., Wang, H., Zhou, W., Li, Y., Li, Y., Xu, J., Huang, W., Chiu, W., et al. (2021) · Matter · doi:10.1016/j.matt.2020.10.021 · Cited by 261
Advances in spinel Li4Ti5O12anode materials for lithium-ion batteries
Sun, X., Radovanovic, P. V., & Cui, B. (2015) · New Journal of Chemistry · doi:10.1039/c4nj01390e · Cited by 257
Li, W., Liu, X., Xie, Q., You, Y., Chi, M., & Manthiram, A. (2020) · Chemistry of Materials · doi:10.1021/acs.chemmater.0c02398 · Cited by 257
Ionic and Electronic Conduction in TiNb2O7
Griffith, K. J., Seymour, I. D., Hope, M. A., Butala, M. M., Lamontagne, L. K., Preefer, M. B., Koçer, C. P., Henkelman, G., Morris, A. J., Cliffe, M. J., et al. (2019) · Journal of the American Chemical Society · doi:10.1021/jacs.9b06669 · Cited by 249
Understanding Anomalous Behavior in Coulombic Efficiency Measurements on Li-Ion Batteries
Gyenes, B., Stevens, D. A., Chevrier, V. L., & Dahn, J. R. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0191503jes · Cited by 248
Wood, M., Li, J., Ruther, R. E., Du, Z., Self, E. C., Meyer, H. M., Daniel, C., Belharouak, I., & Wood, D. L. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2019.08.020 · Cited by 237
Self-citationExtending the Service Life of High‐Ni Layered Oxides by Tuning the Electrode–Electrolyte Interphase
Li, J., Li, W., You, Y., & Manthiram, A. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201801957 · Cited by 232
Self-citationDrying of Granular Ceramic Films: I, Effect of Processing Variables on Cracking Behavior
Chiu, R. C., Garino, T. J., & Cima, M. J. (1993) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1993.tb07762.x · Cited by 229
Mohanty, D., Hockaday, E., Li, J., Hensley, D. K., Daniel, C., & Wood, D. L. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.02.007 · Cited by 226
Self-citationWatanabe, S., Kinoshita, M., Hosokawa, T., Morigaki, K., & Nakura, K. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.02.103 · Cited by 224
Fast formation cycling for lithium ion batteries
An, S. J., Li, J., Du, Z., Daniel, C., & Wood, D. L. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.01.011 · Cited by 224
Self-citationA review of laser electrode processing for development and manufacturing of lithium-ion batteries
Pfleging, W. (2018) · Nanophotonics · doi:10.1515/nanoph-2017-0044 · Cited by 216
Slot-die coating of perovskite solar cells: An overview
Patidar, R., Burkitt, D., Hooper, K., Richards, D., & Watson, T. (2020) · Materials Today Communications · doi:10.1016/j.mtcomm.2019.100808 · Cited by 215
Bauer, W., Nötzel, D., Wenzel, V., & Nirschl, H. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.04.081 · Cited by 204
Use of natural binders and ionic liquid electrolytes for greener and safer lithium-ion batteries
Kim, G. T., Jeong, S. S., Joost, M., Rocca, E., Winter, M., Passerini, S., & Balducci, A. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.09.080 · Cited by 201
Alipour, M., Ziebert, C., Conte, F. V., & Kizilel, R. (2020) · Batteries · doi:10.3390/batteries6030035 · Cited by 200
Membranes in Lithium Ion Batteries
Yang, M., & Hou, J. (2012) · Membranes · doi:10.3390/membranes2030367 · Cited by 197
Recent Development of Polyolefin‐Based Microporous Separators for Li−Ion Batteries: A Review
Heidari, A. A., & Mahdavi, H. (2020) · The Chemical Record · doi:10.1002/tcr.201900054 · Cited by 195
Enabling aqueous binders for lithium battery cathodes – Carbon coating of aluminum current collector
Doberdò, I., Loeffler, N., Laszczynski, N., Cericola, D., Penazzi, N., Bodoardo, S., Kim, G., & Passerini, S. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.10.039 · Cited by 192
Energy impact of cathode drying and solvent recovery during lithium-ion battery manufacturing
Ahmed, S., Nelson, P. A., Gallagher, K. G., & Dees, D. W. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.04.102 · Cited by 184
Cross-Linked Solid Polymer Electrolyte for All-Solid-State Rechargeable Lithium Batteries
Ben youcef, H., Garcia-Calvo, O., Lago, N., Devaraj, S., & Armand, M. (2016) · Electrochimica Acta · doi:10.1016/j.electacta.2016.10.122 · Cited by 181
Formation Challenges of Lithium-Ion Battery Manufacturing
Wood, D. L., Li, J., & An, S. J. (2019) · Joule · doi:10.1016/j.joule.2019.11.002 · Cited by 180
Self-citationSustainable Direct Recycling of Lithium‐Ion Batteries via Solvent Recovery of Electrode Materials
Bai, Y., Muralidharan, N., Li, J., Essehli, R., & Belharouak, I. (2020) · ChemSusChem · doi:10.1002/cssc.202001479 · Cited by 178
Self-citationDesign criteria for electrochemical shock resistant battery electrodes
Woodford, W. H., Carter, W. C., & Chiang, Y.-M. (2012) · Energy & Environmental Science · doi:10.1039/c2ee21874g · Cited by 177
Qiu, X., Zhuang, Q., Zhang, Q., et al. (2011) · Physical Chemistry Chemical Physics · doi:10.1039/c2cp23626e · Cited by 176
Xu, L., Lu, Y., Zhao, C., Yuan, H., Zhu, G., Hou, L., Zhang, Q., & Huang, J. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202002360 · Cited by 173
Schnell, J., Tietz, F., Singer, C., Höfer, A., Billot, N., & Reinhart, G. (2019) · Energy & Environmental Science · doi:10.1039/c8ee02692k · Cited by 172
Abe, K., Ushigoe, Y., Yoshitake, H., & Yoshio, M. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.05.067 · Cited by 171
Jaiser, S., Kumberg, J., Klaver, J., Urai, J. L., Schabel, W., Schmatz, J., & Scharfer, P. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.01.117 · Cited by 167
Holey Graphene Nanomanufacturing: Structure, Composition, and Electrochemical Properties
Lin, Y., Han, X., Campbell, C. J., Kim, J., Zhao, B., Luo, W., Dai, J., Hu, L., & Connell, J. W. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201500321 · Cited by 165
Drying of Granular Ceramic Films: II, Drying Stress and Saturation Uniformity
Chiu, R. C., & Cima, M. J. (1993) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1993.tb04014.x · Cited by 165
Selection of Conductive Additives in Li-Ion Battery Cathodes
Chen, Y.-H., Wang, C.-W., Liu, G., Song, X.-Y., Battaglia, V. S., & Sastry, A. M. (2007) · Journal of The Electrochemical Society · doi:10.1149/1.2767839 · Cited by 165
Image-based defect detection in lithium-ion battery electrode using convolutional neural networks
Badmos, O., Kopp, A., Bernthaler, T., & Schneider, G. (2019) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-019-01484-x · Cited by 165
From Cell to Battery System in BEVs: Analysis of System Packing Efficiency and Cell Types
Löbberding, H., Wessel, S., Offermanns, C., Kehrer, M., Rother, J., Heimes, H. H., & Kampker, A. (2020) · World Electric Vehicle Journal · doi:10.3390/wevj11040077 · Cited by 165
Mechanical characterization of LiPON films using nanoindentation
Herbert, E. G., Tenhaeff, W. E., Dudney, N. J., & Pharr, G. M. (2011) · Thin Solid Films · doi:10.1016/j.tsf.2011.07.068 · Cited by 163
Krueger, S., Kloepsch, R., Li, J., Nowak, S., Passerini, S., & Winter, M. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.022304jes · Cited by 159
Self-citationThermal Stability and Reactivity of Cathode Materials for Li-Ion Batteries
Huang, Y., Lin, Y.-C., Jenkins, D. M., Chernova, N. A., Chung, Y., Radhakrishnan, B., Chu, I.-H., Fang, J., Wang, Q., Omenya, F., et al. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b12081 · Cited by 159
Li, J., Lu, Y., Yang, T., Ge, D., Wood, D. L., & Li, Z. (2020) · iScience · doi:10.1016/j.isci.2020.101081 · Cited by 159
Self-citationEconomies of scale in battery cell manufacturing: The impact of material and process innovations
Mauler, L., Duffner, F., & Leker, J. (2021) · Applied Energy · doi:10.1016/j.apenergy.2021.116499 · Cited by 152
Effect of CO2 on layered Li1+zNi1−x−yCoxMyO2 (M=Al, Mn) cathode materials for lithium ion batteries
Shizuka, K., Kiyohara, C., Shima, K., & Takeda, Y. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.01.013 · Cited by 151
Effect of Calendering on Electrode Wettability in Lithium-Ion Batteries
Sheng, Y., Fell, C. R., Son, Y. K., Metz, B. M., Jiang, J., & Church, B. C. (2014) · Frontiers in Energy Research · doi:10.3389/fenrg.2014.00056 · Cited by 148
Delattre, B., Amin, R., Sander, J. S., Coninck, J. D., Tomsia, A. P., & Chiang, Y. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.1321802jes · Cited by 146
Kim, C.-S., Jeong, K. M., Kim, K., & Yi, C.-W. (2014) · Electrochimica Acta · doi:10.1016/j.electacta.2014.12.005 · Cited by 145
Influence of Convective Drying Parameters on Electrode Performance and Physical Electrode Properties
Westphal, B., Bockholt, H., Günther, T., Haselrieder, W., & Kwade, A. (2015) · ECS Transactions · doi:10.1149/06422.0057ecst · Cited by 142
The Influence of Current Ripples on the Lifetime of Lithium-Ion Batteries
Brand, M. J., Hofmann, M. H., Schuster, S. F., Keil, P., & Jossen, A. (2018) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2018.2869982 · Cited by 141
Mechanistic Understanding of the Role of Evaporation in Electrode Processing
Stein, M., Mistry, A. N., & Mukherjee, P. P. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.1271707jes · Cited by 139
Günther, T., Schreiner, D., Metkar, A., Meyer, C., Kwade, A., & Reinhart, G. (2019) · Energy Technology · doi:10.1002/ente.201900026 · Cited by 138
The effect of external compressive loads on the cycle lifetime of lithium-ion pouch cells
Barai, A., Tangirala, R., Uddin, K., Chevalier, J., Guo, Y., McGordon, A., & Jennings, P. A. (2017) · Journal of Energy Storage · doi:10.1016/j.est.2017.07.021 · Cited by 137
Busà, C., Belekoukia, M., & Loveridge, M. (2020) · Electrochimica Acta · doi:10.1016/j.electacta.2020.137358 · Cited by 136
SBA-15 confined synthesis of TiNb2O7 nanoparticles for lithium-ion batteries
Fei, L., Xu, Y. P., Wu, X., Li, Y., Xie, P., Deng, S., Smirnov, S., & Luo, H. (2013) · Nanoscale · doi:10.1039/c3nr03594h · Cited by 133
MacNeil, D. D., & Dahn, J. R. (2001) · The Journal of Physical Chemistry A · doi:10.1021/jp001187j · Cited by 133
GUOPING, W., QINGTANG, Z., ZUOLONG, Y., & MEIZHENG, Q. (2008) · Solid State Ionics · doi:10.1016/j.ssi.2008.01.015 · Cited by 133
Eom, J., Kim, M. G., & Cho, J. (2008) · Journal of The Electrochemical Society · doi:10.1149/1.2830946 · Cited by 133
Recovery of Cathode Materials and Aluminum Foil Using a Green Solvent
Bai, Y., Essehli, R., Jafta, C. J., Livingston, K. M., & Belharouak, I. (2021) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.1c01293 · Cited by 133
Li, C., & Wang, Y.-W. (2011) · Journal of The Electrochemical Society · doi:10.1149/2.107112jes · Cited by 129
Performance of LiNi1/3Mn1/3Co1/3O2/graphite batteries based on aqueous binder
Loeffler, N., von Zamory, J., Laszczynski, N., Doberdò, I., Kim, G., & Passerini, S. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.10.018 · Cited by 126
Opportunities for the State-of-the-Art Production of LIB Electrodes—A Review
Bryntesen, S. N., Strømman, A. H., Tolstorebrov, I., Shearing, P. R., Lamb, J. J., & Burheim, O. S. (2021) · Energies · doi:10.3390/en14051406 · Cited by 126
Review—Emerging Trends in the Design of Electrolytes for Lithium and Post-Lithium Batteries
Quartarone, E., & Mustarelli, P. (2020) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ab63c4 · Cited by 124
Optimizing the surfactant for the aqueous processing of LiFePO4 composite electrodes
Porcher, W., Lestriez, B., Jouanneau, S., & Guyomard, D. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.11.088 · Cited by 123
Wu, Y., Saxena, S., Xing, Y., Wang, Y., Li, C., Yung, W., & PECHT, M. G. (2018) · Energies · doi:10.3390/en11040925 · Cited by 123
Tokranov, A., Kumar, R., Li, C., Minne, S. C., Xiao, X., & Sheldon, B. W. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502302 · Cited by 120
Takashima, T., Tojo, T., Inada, R., & Sakurai, Y. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.11.109 · Cited by 119
Latex Migration in Battery Slurries during Drying
Lim, S., Ahn, K. H., & Yamamura, M. (2013) · Langmuir · doi:10.1021/la4013685 · Cited by 119
Disintegration of Meatball Electrodes for LiNi x Mn y Co z O2 Cathode Materials
Xu, R., de Vasconcelos, L. S., Shi, J., Li, J., & Zhao, K. (2017) · Experimental Mechanics · doi:10.1007/s11340-017-0292-0 · Cited by 119
Self-citationHabedank, J. B., Günter, F. J., Billot, N., Gilles, R., Neuwirth, T., Reinhart, G., & Zaeh, M. F. (2019) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-019-03347-4 · Cited by 112
Muralidharan, N., Essehli, R., Hermann, R., Amin, R., Jafta, C. J., Zhang, J., Liu, J., Du, Z., Meyer, H. M., Self, E. C., et al. (2020) · Advanced Materials · doi:10.1002/adma.202002960 · Cited by 112
Reduction, reuse and recycle of spent Li-ion batteries for automobiles: A review
Fujita, T., Chen, H., Wang, K.-T., He, C., Wang, Y., Dodbiba, G., & Wei, Y. (2021) · International Journal of Minerals Metallurgy and Materials · doi:10.1007/s12613-020-2127-8 · Cited by 110
An, S. J., Li, J., Daniel, C., Meyer, H. M., Trask, S. E., Polzin, B. J., & Wood, D. L. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b03617 · Cited by 109
Self-citationLiu, Y., Tan, L., & Li, L. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.08.028 · Cited by 108
Sustainable recycling of cathode scraps via Cyrene-based separation
Bai, Y., Hawley, W. B., Jafta, C. J., Muralidharan, N., Polzin, B. J., & Belharouak, I. (2020) · Sustainable materials and technologies · doi:10.1016/j.susmat.2020.e00202 · Cited by 107
Self-citationElectrochemical Stability of Copper in Lithium-Ion Battery Electrolytes
Zhao, M., Kariuki, S., Dewald, H. D., Lemke, F. R., Staniewicz, R. J., Plichta, E. J., & Marsh, R. A. (2000) · Journal of The Electrochemical Society · doi:10.1149/1.1393619 · Cited by 99
Optimization of LiFePO4 Nanoparticle Suspensions with Polyethyleneimine for Aqueous Processing
Li, J., Armstrong, B. L., Kiggans, J., Daniel, C., & Wood, D. L. (2012) · Langmuir · doi:10.1021/la205157d · Cited by 98
Self-citationIn Situ Coating of Li[Ni0.33Mn0.33Co0.33]O2 Particles to Enable Aqueous Electrode Processing
Loeffler, N., Kim, G., Mueller, F., Diemant, T., Kim, J., Behm, R. J., & Passerini, S. (2016) · ChemSusChem · doi:10.1002/cssc.201600353 · Cited by 97
Li, J., Armstrong, B. L., Kiggans, J., Daniel, C., & Wood, D. L. (2012) · Journal of The Electrochemical Society · doi:10.1149/2.037302jes · Cited by 96
Self-citationEffect of calendering and temperature on electrolyte wetting in lithium-ion battery electrodes
Davoodabadi, A., Li, J., Zhou, H., Wood, D. L., Singler, T. J., & Jin, C. (2019) · Journal of Energy Storage · doi:10.1016/j.est.2019.101034 · Cited by 95
Self-citationYao, X., Xie, S., Chen, C. H., et al. (2005) · Electrochimica Acta · doi:10.1016/j.electacta.2005.01.034 · Cited by 94
Heat transfer enhancement in a lithium-ion cell through improved material-level thermal transport
Vishwakarma, V., Waghela, C., Wei, Z., Prasher, R., Nagpure, S. C., Li, J., Liu, F., Daniel, C., & Jain, A. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.09.028 · Cited by 94
Self-citationWood, D., Wood, M., Li, J.-L., Du, Z.-J., Ruther, R., Hays, K. A., Muralidharan, N., Geng, L.-X., Mao, C., & Belharouak, I. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2020.04.036 · Cited by 94
Self-citationAn, S. J., Li, J., Mohanty, D., Daniel, C., Polzin, B. J., Croy, J. R., Trask, S. E., & Wood, D. L. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.1131706jes · Cited by 92
Self-citationSim, R., Lee, S. S. W., Li, W., & Manthiram, A. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c12543 · Cited by 91
Effects of the Mixing Sequence on Making Lithium Ion Battery Electrodes
Wang, M., Dang, D., Meyer, A., Arsenault, R., & Cheng, Y. (2020) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ab95c6 · Cited by 90
Wang, C., Bai, G., Yang, Y., Liu, X., & Shao, H. (2018) · Nano Research · doi:10.1007/s12274-018-2205-7 · Cited by 89
Design and Demonstration of Three-Electrode Pouch Cells for Lithium-Ion Batteries
An, S. J., Li, J., Daniel, C., Kalnaus, S., & Wood, D. L. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.0031709jes · Cited by 88
Self-citationHaruta, M., Okubo, T., Masuo, Y., Yoshida, S., Tomita, A., Takenaka, T., Doi, T., & Inaba, M. (2016) · Electrochimica Acta · doi:10.1016/j.electacta.2016.12.071 · Cited by 87
Kuenzel, M., Bresser, D., Diemant, T., Carvalho, D. V., Kim, G., Behm, R. J., & Passerini, S. (2017) · ChemSusChem · doi:10.1002/cssc.201702021 · Cited by 87
Parikh, D., Christensen, T., & Li, J.-L. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.228601 · Cited by 87
Self-citationLi, J., Armstrong, B. L., Daniel, C., Kiggans, J., & Wood, D. L. (2013) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2013.05.030 · Cited by 85
Self-citationLiNixFeyAlzO2, a new cobalt-free layered cathode material for advanced Li-ion batteries
Muralidharan, N., Essehli, R., Hermann, R. P., Parejiya, A., Amin, R., Bai, Y., Du, Z., & Belharouak, I. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.228389 · Cited by 85
Surface Modification Strategies for Improving the Cycling Performance of Ni‐Rich Cathode Materials
Weber, D. J., Tripković, Đ., Kretschmer, K., Bianchini, M., & Brezesinski, T. (2020) · European Journal of Inorganic Chemistry · doi:10.1002/ejic.202000408 · Cited by 84
Identifying degradation mechanisms in lithium-ion batteries with coating defects at the cathode
David, L., Ruther, R. E., Mohanty, D., Meyer, H. M., Sheng, Y., Kalnaus, S., Daniel, C., & Wood, D. L. (2018) · Applied Energy · doi:10.1016/j.apenergy.2018.09.073 · Cited by 80
Li, J., Rulison, C. J., Kiggans, J., Daniel, C., & Wood, D. L. (2012) · Journal of The Electrochemical Society · doi:10.1149/2.018208jes · Cited by 79
Self-citationMa, L., Xia, J., Xia, X., & Dahn, J. R. (2014) · Journal of The Electrochemical Society · doi:10.1149/2.0091410jes · Cited by 77
Tabari, M. (2017) · Foods · doi:10.3390/foods6060041 · Cited by 76
Good Practices for Rechargeable Lithium Metal Batteries
Wu, B., Yang, Y., Liu, D., Niu, C., Gross, M. E., Seymour, L. M., Lee, H., Le, P. M. L., Vo, T. D., Deng, Z. D., et al. (2019) · Journal of The Electrochemical Society · doi:10.1149/2.0691916jes · Cited by 75
Lee, D., Patwa, R., Herfurth, H., & Mazumder, J. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.03.030 · Cited by 74
Cobb, C. L., & Blanco, M. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.10.084 · Cited by 73
Microstructure Evolution in Lithium-Ion Battery Electrode Processing
Liu, Z., & Mukherjee, P. P. (2014) · Journal of The Electrochemical Society · doi:10.1149/2.026408jes · Cited by 73
Kazzazi, A., Bresser, D., Birrozzi, A., von Zamory, J., Hekmatfar, M., & Passerini, S. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b03657 · Cited by 72
Prevention of lithium-ion battery thermal runaway using polymer-substrate current collectors
Pham, M., Darst, J. J., Walker, W. Q., Heenan, T. M. M., Patel, D., Iacoviello, F., Rack, A., Olbinado, M. P., Hinds, G., Brett, D. J. L., et al. (2021) · Cell Reports Physical Science · doi:10.1016/j.xcrp.2021.100360 · Cited by 70
Lee, T., Kim, W.-K., Lee, Y., Ryou, M.-H., & Lee, Y. M. (2014) · Macromolecular Research · doi:10.1007/s13233-014-2163-1 · Cited by 69
Lee, J., Kim, J.-S., Kim, Y., et al. (2008) · Ultramicroscopy · doi:10.1016/j.ultramic.2008.04.027 · Cited by 69
Takahashi, M., Ohtsuka, H., Akuto, K., & Sakurai, Y. (2005) · Journal of The Electrochemical Society · doi:10.1149/1.1874693 · Cited by 68
Is There a Benefit in Employing Graded Electrodes for Lithium-Ion Batteries?
Qi, Y., Jang, T., Ramadesigan, V., Schwartz, D. T., & Subramanian, V. R. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.1051713jes · Cited by 68
Three-dimensional conductive network formed by carbon nanotubes in aqueous processed NMC electrode
Du, Z., Li, J., Wood, M., Mao, C., Daniel, C., & Wood, D. L. (2018) · Electrochimica Acta · doi:10.1016/j.electacta.2018.03.063 · Cited by 67
Self-citationX-ray Based Visualization of the Electrolyte Filling Process of Lithium Ion Batteries
Schilling, A., Gümbel, P., Möller, M., Kalkan, F., Dietrich, F., & Dröder, K. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.0251903jes · Cited by 67
Farmann, A., Waag, W., & Sauer, D. U. (2016) · Energy · doi:10.1016/j.energy.2016.06.088 · Cited by 64
Diehm, R., Kumberg, J., Dörrer, C., Müller, M., Bauer, W., Scharfer, P., & Schabel, W. (2020) · Energy Technology · doi:10.1002/ente.201901251 · Cited by 62
The Origin of Stress in the Solid Electrolyte Interphase on Carbon Electrodes for Li Ion Batteries
Tokranov, A., Sheldon, B. W., Lu, P., Xiao, X., & Mukhopadhyay, A. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.009401jes · Cited by 59
Enabling the Electric Future of Mobility: Robotic Automation for Electric Vehicle Battery Assembly
Sharma, A., Zanotti, P., & Musunur, L. P. (2019) · IEEE Access · doi:10.1109/access.2019.2953712 · Cited by 59
Mohanty, D., Li, J., Born, R., Maxey, L. C., Dinwiddie, R. B., Daniel, C., & Wood, D. L. (2013) · Analytical Methods · doi:10.1039/c3ay41140k · Cited by 58
Self-citation
Cited by
High‐Energy Lithium‐Ion Batteries: Recent Progress and a Promising Future in Applications
Xu, J., Cai, X., Cai, S., Shao, Y., Hu, C., Lu, S., & Ding, S. (2023) · ENERGY & ENVIRONMENTAL MATERIALS · doi:10.1002/eem2.12450 · Cited by 1,201
Gutsch, M., & Leker, J. (2024) · Applied Energy · doi:10.1016/j.apenergy.2023.122132 · Cited by 247
Metadata
- Authors
- Li, J., Fleetwood, J., Hawley, W. B., & Kays, W.
- Venue
- Chemical Reviews
- Publisher
- American Chemical Society (ACS)
- Published
- 2021-10-27
- Volume
- 122
- Issue
- 1
- Pages
- 903-956
- ISSN
- 0009-2665 (ISSN-L)
- 1520-6890
- OpenAlex
- W3211251066
- Cited by
- 895
- References
- 233
- FWCI
- 10.36
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.