The DOI matches its Crossref record; 500 of the 500 references it cites were found in a registry or an index.
Synthetic Approaches for Halide Perovskite Thin Films
Abstract
Halide perovskites are an intriguing class of materials that have recently attracted considerable attention for use as the active layer in thin film optoelectronic devices, including thin-film transistors, light-emitting devices, and solar cells. The “soft” nature of these materials, as characterized by their low formation energy and Young’s modulus, and high thermal expansion coefficients, not only enables thin films to be fabricated via low-temperature deposition methods but also presents rich opportunities for manipulating film formation. This comprehensive review explores how the unique chemistry of these materials can be exploited to tailor film growth processes and highlights the connections between processing methods and the resulting film characteristics. The discussion focuses principally on methylammonium lead iodide (CH 3 NH 3 PbI 3 or MAPbI 3 ), which serves as a useful and well-studied model system for examining the unique attributes of halide perovskites, but various other important members of this family are also considered. The resulting film properties are discussed in the context of the characteristics necessary for achieving high-performance optoelectronic devices and accurate measurement of physical properties.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Shannon, R. D. (1976) · Acta Crystallographica Section A · doi:10.1107/s0567739476001551 · Cited by 66,145
A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films
O'Regan, B., & Grätzel, M. (1991) · Nature · doi:10.1038/353737a0 · Cited by 28,599
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
Physical chemistry of surfaces
(1998) · Choice Reviews Online · doi:10.5860/choice.35-4499 · Cited by 11,648
Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites
Lee, M. M., Teuscher, J., Miyasaka, T., Murakami, T. N., & Snaith, H. J. (2012) · Science · doi:10.1126/science.1228604 · Cited by 10,687
Stranks, S. D., Eperon, G. E., Grancini, G., Menelaou, C., Alcocer, M. J. P., Leijtens, T., Herz, L. M., Petrozza, A., & Snaith, H. J. (2013) · Science · doi:10.1126/science.1243982 · Cited by 10,413
Sequential deposition as a route to high-performance perovskite-sensitized solar cells
Burschka, J., Pellet, N., Moon, S.-J., Humphry-Baker, R., Gao, P., Nazeeruddin, M. K., & Grätzel, M. (2013) · Nature · doi:10.1038/nature12340 · Cited by 9,547
Protesescu, L., Yakunin, S., Bodnarchuk, M. I., Krieg, F., Caputo, R., Hendon, C. H., Yang, R. X., Walsh, A., & Kovalenko, M. V. (2015) · Nano Letters · doi:10.1021/nl5048779 · Cited by 9,209
Efficient planar heterojunction perovskite solar cells by vapour deposition
Liu, M., Johnston, M. B., & Snaith, H. J. (2013) · Nature · doi:10.1038/nature12509 · Cited by 7,976
Kingery, W. D., Bowen, H. K., Uhlmann, D. R., & Frieser, R. (1977) · Journal of The Electrochemical Society · doi:10.1149/1.2133296 · Cited by 7,923
The emergence of perovskite solar cells
Green, M. A., Ho-Baillie, A., & Snaith, H. J. (2014) · Nature Photonics · doi:10.1038/nphoton.2014.134 · Cited by 7,432
Long-Range Balanced Electron- and Hole-Transport Lengths in Organic-Inorganic CH 3 NH 3 PbI 3
Xing, G., Mathews, N., Sun, S., Lim, S. S., Lam, Y. M., Grätzel, M., Mhaisalkar, S., & Sum, T. C. (2013) · Science · doi:10.1126/science.1243167 · Cited by 6,909
Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells
Jeon, N. J., Noh, J. H., Kim, Y. C., Yang, W. S., Ryu, S., & Seok, S. I. (2014) · Nature Materials · doi:10.1038/nmat4014 · Cited by 6,723
Compositional engineering of perovskite materials for high-performance solar cells
Jeon, N. J., Noh, J. H., Yang, W. S., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Nature · doi:10.1038/nature14133 · Cited by 6,431
High-performance photovoltaic perovskite layers fabricated through intramolecular exchange
Yang, W. S., Noh, J. H., Jeon, N. J., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Science · doi:10.1126/science.aaa9272 · Cited by 6,251
Iodide management in formamidinium-lead-halide–based perovskite layers for efficient solar cells
Yang, W. S., Park, B.-W., Jung, E. H., Jeon, N. J., Kim, Y. C., Lee, D. U., Shin, S. S., Seo, J., Kim, E. K., Noh, J. H., et al. (2017) · Science · doi:10.1126/science.aan2301 · Cited by 5,445
Saliba, M., Matsui, T., Seo, J.-Y., Domanski, K., Correa-Baena, J.-P., Nazeeruddin, M. K., Zakeeruddin, S. M., Tress, W., Abate, A., Hagfeldt, A., et al. (2016) · Energy & Environmental Science · doi:10.1039/c5ee03874j · Cited by 5,440
Stoumpos, C. C., Malliakas, C. D., & Kanatzidis, M. G. (2013) · Inorganic Chemistry · doi:10.1021/ic401215x · Cited by 5,416
Noh, J. H., Im, S. H., Heo, J. H., Mandal, T. N., & Seok, S. I. (2013) · Nano Letters · doi:10.1021/nl400349b · Cited by 4,829
Lawn, B. (1993) · Cambridge University Press eBooks · doi:10.1017/cbo9780511623127 · Cited by 4,759
Eperon, G. E., Stranks, S. D., Menelaou, C., Johnston, M. B., Herz, L. M., & Snaith, H. J. (2014) · Energy & Environmental Science · doi:10.1039/c3ee43822h · Cited by 4,140
Die Gesetze der Krystallochemie
Goldschmidt, V. M. (1926) · Die Naturwissenschaften · doi:10.1007/bf01507527 · Cited by 4,012
Theory, Production and Mechanism of Formation of Monodispersed Hydrosols
LaMer, V. K., & Dinegar, R. H. (1950) · Journal of the American Chemical Society · doi:10.1021/ja01167a001 · Cited by 3,894
Incorporation of rubidium cations into perovskite solar cells improves photovoltaic performance
Saliba, M., Matsui, T., Domanski, K., Seo, J.-Y., Ummadisingu, A., Zakeeruddin, S. M., Correa-Baena, J.-P., Tress, W. R., Abate, A., Hagfeldt, A., et al. (2016) · Science · doi:10.1126/science.aah5557 · Cited by 3,706
High-efficiency two-dimensional Ruddlesden–Popper perovskite solar cells
Tsai, H., Nie, W., Blancon, J.-C., Stoumpos, C. C., Asadpour, R., Harutyunyan, B., Neukirch, A. J., Verduzco, R., Crochet, J. J., Tretiak, S., et al. (2016) · Nature · doi:10.1038/nature18306 · Cited by 3,384
High-efficiency solution-processed perovskite solar cells with millimeter-scale grains
Nie, W., Tsai, H., Asadpour, R., Blancon, J.-C., Neukirch, A. J., Gupta, G., Crochet, J. J., Chhowalla, M., Tretiak, S., Alam, M. A., et al. (2015) · Science · doi:10.1126/science.aaa0472 · Cited by 3,295
High Charge Carrier Mobilities and Lifetimes in Organolead Trihalide Perovskites
Wehrenfennig, C., Eperon, G. E., Johnston, M. B., Snaith, H. J., & Herz, L. M. (2014) · Advanced Materials · doi:10.1002/adma.201305172 · Cited by 3,239
Low-temperature solution-processed wavelength-tunable perovskites for lasing
Xing, G., Mathews, N., Lim, S. S., Yantara, N., Liu, X., Sabba, D., Grätzel, M., Mhaisalkar, S., & Sum, T. C. (2014) · Nature Materials · doi:10.1038/nmat3911 · Cited by 3,219
A mixed-cation lead mixed-halide perovskite absorber for tandem solar cells
McMeekin, D. P., Sadoughi, G., Rehman, W., Eperon, G. E., Saliba, M., Hörantner, M. T., Haghighirad, A., Sakai, N., Korte, L., Rech, B., et al. (2016) · Science · doi:10.1126/science.aad5845 · Cited by 3,067
A hole-conductor–free, fully printable mesoscopic perovskite solar cell with high stability
Mei, A., Li, X., Liu, L., Ku, Z., Liu, T., Rong, Y., Xu, M., Hu, M., Chen, J., Yang, Y., et al. (2014) · Science · doi:10.1126/science.1254763 · Cited by 3,043
Lead-free solid-state organic–inorganic halide perovskite solar cells
Hao, F., Stoumpos, C. C., Cao, D. H., Chang, R. P. H., & Kanatzidis, M. G. (2014) · Nature Photonics · doi:10.1038/nphoton.2014.82 · Cited by 3,026
Shao, Y., Xiao, Z., Bi, C., Yuan, Y., & Huang, J. (2014) · Nature Communications · doi:10.1038/ncomms6784 · Cited by 3,025
Nucleation and growth of thin films
Venables, J. A., Spiller, G. D. T., & Hanbucken, M. (1984) · Reports on Progress in Physics · doi:10.1088/0034-4885/47/4/002 · Cited by 2,930
Overcoming the electroluminescence efficiency limitations of perovskite light-emitting diodes
Cho, H., Jeong, S.-H., Park, M.-H., Kim, Y.-H., Wolf, C., Lee, C.-L., Heo, J. H., Sadhanala, A., Myoung, N., Yoo, S., et al. (2015) · Science · doi:10.1126/science.aad1818 · Cited by 2,925
Organic–Inorganic Perovskites: Structural Versatility for Functional Materials Design
Saparov, B., & Mitzi, D. B. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00715 · Cited by 2,907
Self-citationQuantum Dot Light‐Emitting Diodes Based on Inorganic Perovskite Cesium Lead Halides (CsPbX3)
Song, J., Li, J., Li, X., Xu, L., Dong, Y., & Zeng, H. (2015) · Advanced Materials · doi:10.1002/adma.201502567 · Cited by 2,896
Ionic transport in hybrid lead iodide perovskite solar cells
Eames, C., Frost, J. M., Barnes, P. R. F., O’Regan, B. C., Walsh, A., & Islam, M. S. (2015) · Nature Communications · doi:10.1038/ncomms8497 · Cited by 2,889
Lead halide perovskite nanowire lasers with low lasing thresholds and high quality factors
Zhu, H., Fu, Y., Meng, F., Wu, X., Gong, Z., Ding, Q., Gustafsson, M. V., Trinh, M. T., Jin, S., & Zhu, X.-Y. (2015) · Nature Materials · doi:10.1038/nmat4271 · Cited by 2,836
Quantum dot–induced phase stabilization of α-CsPbI 3 perovskite for high-efficiency photovoltaics
Swarnkar, A., Marshall, A. R., Sanehira, E. M., Chernomordik, B. D., Moore, D. T., Christians, J. A., Chakrabarti, T., & Luther, J. M. (2016) · Science · doi:10.1126/science.aag2700 · Cited by 2,794
Lead-free organic–inorganic tin halide perovskites for photovoltaic applications
Noel, N. K., Stranks, S. D., Abate, A., Wehrenfennig, C., Guarnera, S., Haghighirad, A.-A., Sadhanala, A., Eperon, G. E., Pathak, S. K., Johnston, M. B., et al. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01076k · Cited by 2,746
Liu, D., & Kelly, T. L. (2014) · Nature Photonics · doi:10.1038/nphoton.2013.342 · Cited by 2,663
Anomalous Hysteresis in Perovskite Solar Cells
Snaith, H. J., Abate, A., Ball, J. M., Eperon, G. E., Leijtens, T., Noel, N. K., Stranks, S. D., Wang, J. T.-W., Wojciechowski, K., & Zhang, W. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz500113x · Cited by 2,465
Atomistic Origins of High-Performance in Hybrid Halide Perovskite Solar Cells
Frost, J. M., Butler, K. T., Brivio, F., Hendon, C. H., van Schilfgaarde, M., & Walsh, A. (2014) · Nano Letters · doi:10.1021/nl500390f · Cited by 2,425
Efficient and stable solution-processed planar perovskite solar cells via contact passivation
Tan, H., Jain, A., Voznyy, O., Lan, X., García de Arquer, F. P., Fan, J. Z., Quintero-Bermudez, R., Yuan, M., Zhang, B., Zhao, Y., et al. (2017) · Science · doi:10.1126/science.aai9081 · Cited by 2,342
Unique Properties of Halide Perovskites as Possible Origins of the Superior Solar Cell Performance
Yin, W., Shi, T., & Yan, Y. (2014) · Advanced Materials · doi:10.1002/adma.201306281 · Cited by 2,334
Perovskite energy funnels for efficient light-emitting diodes
Yuan, M., Quan, L. N., Comin, R., Walters, G., Sabatini, R., Voznyy, O., Hoogland, S., Zhao, Y., Beauregard, E. M., Kanjanaboos, P., et al. (2016) · Nature Nanotechnology · doi:10.1038/nnano.2016.110 · Cited by 2,325
Ahn, N., Son, D.-Y., Jang, I.-H., Kang, S. M., Choi, M., & Park, N.-G. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b04930 · Cited by 2,312
Planar Heterojunction Perovskite Solar Cells via Vapor-Assisted Solution Process
Chen, Q., Zhou, H., Hong, Z., Luo, S., Duan, H.-S., Wang, H.-H., Liu, Y., Li, G., & Yang, Y. (2014) · Journal of the American Chemical Society · doi:10.1021/ja411509g · Cited by 2,306
Reversible photo-induced trap formation in mixed-halide hybrid perovskites for photovoltaics
Hoke, E. T., Slotcavage, D. J., Dohner, E. R., Bowring, A. R., Karunadasa, H. I., & McGehee, M. D. (2015) · Chemical Science · doi:10.1039/c4sc03141e · Cited by 2,295
Li, Z., Yang, M., Park, J.-S., Wei, S.-H., Berry, J. J., & Zhu, K. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b04107 · Cited by 2,269
The light and shade of perovskite solar cells
Grätzel, M. (2014) · Nature Materials · doi:10.1038/nmat4065 · Cited by 2,258
Slavney, A. H., Hu, T., Lindenberg, A. M., & Karunadasa, H. I. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.5b13294 · Cited by 2,204
Impact of microstructure on local carrier lifetime in perovskite solar cells
de Quilettes, D. W., Vorpahl, S. M., Stranks, S. D., Nagaoka, H., Eperon, G. E., Ziffer, M. E., Snaith, H. J., & Ginger, D. S. (2015) · Science · doi:10.1126/science.aaa5333 · Cited by 2,198
2D Homologous Perovskites as Light-Absorbing Materials for Solar Cell Applications
Cao, D. H., Stoumpos, C. C., Farha, O. K., Hupp, J. T., & Kanatzidis, M. G. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b03796 · Cited by 2,158
Crystallization by particle attachment in synthetic, biogenic, and geologic environments
De Yoreo, J. J., Gilbert, P. U. P. A., Sommerdijk, N. A. J. M., Penn, R. L., Whitelam, S., Joester, D., Zhang, H., Rimer, J. D., Navrotsky, A., Banfield, J. F., et al. (2015) · Science · doi:10.1126/science.aaa6760 · Cited by 2,137
Ruddlesden–Popper Hybrid Lead Iodide Perovskite 2D Homologous Semiconductors
Stoumpos, C. C., Cao, D. H., Clark, D. J., Young, J., Rondinelli, J. M., Jang, J. I., Hupp, J. T., & Kanatzidis, M. G. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b00847 · Cited by 2,130
Organic-Inorganic Hybrid Materials as Semiconducting Channels in Thin-Film Field-Effect Transistors
Kagan, C. R., Mitzi, D. B., & Dimitrakopoulos, C. D. (1999) · Science · doi:10.1126/science.286.5441.945 · Cited by 2,110
Self-citationJeon, N. J., Na, H., Jung, E. H., Yang, T.-Y., Lee, Y. G., Kim, G., Shin, H.-W., Il Seok, S., Lee, J., & Seo, J. (2018) · Nature Energy · doi:10.1038/s41560-018-0200-6 · Cited by 2,089
One-Year stable perovskite solar cells by 2D/3D interface engineering
Grancini, G., Roldán-Carmona, C., Zimmermann, I., Mosconi, E., Lee, X., Martineau, D., Narbey, S., Oswald, F., De Angelis, F., Graetzel, M., et al. (2017) · Nature Communications · doi:10.1038/ncomms15684 · Cited by 2,068
Jiang, Q., Zhang, L., Wang, H., Yang, X., Meng, J., Liu, H., Yin, Z., Wu, J., Zhang, X., & You, J. (2016) · Nature Energy · doi:10.1038/nenergy.2016.177 · Cited by 2,024
A Layered Hybrid Perovskite Solar‐Cell Absorber with Enhanced Moisture Stability
Smith, I. C., Hoke, E. T., Solis‐Ibarra, D., McGehee, M. D., & Karunadasa, H. I. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201406466 · Cited by 2,011
Eperon, G. E., Burlakov, V. M., Docampo, P., Goriely, A., & Snaith, H. J. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201302090 · Cited by 1,982
Saidaminov, M. I., Abdelhady, A. L., Murali, B., Alarousu, E., Burlakov, V. M., Peng, W., Dursun, I., Wang, L., He, Y., Maculan, G., et al. (2015) · Nature Communications · doi:10.1038/ncomms8586 · Cited by 1,922
A vacuum flash–assisted solution process for high-efficiency large-area perovskite solar cells
Li, X., Bi, D., Yi, C., Décoppet, J.-D., Luo, J., Zakeeruddin, S. M., Hagfeldt, A., & Grätzel, M. (2016) · Science · doi:10.1126/science.aaf8060 · Cited by 1,915
Sensitive X-ray detectors made of methylammonium lead tribromide perovskite single crystals
Wei, H., Fang, Y., Mulligan, P., Chuirazzi, W., Fang, H.-H., Wang, C., Ecker, B. R., Gao, Y., Loi, M. A., Cao, L., et al. (2016) · Nature Photonics · doi:10.1038/nphoton.2016.41 · Cited by 1,877
Yuan, Y., & Huang, J. (2016) · Accounts of Chemical Research · doi:10.1021/acs.accounts.5b00420 · Cited by 1,865
Efficient luminescent solar cells based on tailored mixed-cation perovskites
Bi, D., Tress, W., Dar, M. I., Gao, P., Luo, J., Renevier, C., Schenk, K., Abate, A., Giordano, F., Correa Baena, J.-P., et al. (2016) · Science Advances · doi:10.1126/sciadv.1501170 · Cited by 1,864
Inorganic caesium lead iodide perovskite solar cells
Eperon, G. E., Paternò, G. M., Sutton, R. J., Zampetti, A., Haghighirad, A. A., Cacialli, F., & Snaith, H. J. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta06398a · Cited by 1,852
Perovskite light-emitting diodes based on solution-processed self-organized multiple quantum wells
Wang, N., Cheng, L., Ge, R., Zhang, S., Miao, Y., Zou, W., Yi, C., Sun, Y., Cao, Y., Yang, R., et al. (2016) · Nature Photonics · doi:10.1038/nphoton.2016.185 · Cited by 1,845
Growth of CH3NH3PbI3 cuboids with controlled size for high-efficiency perovskite solar cells
Im, J.-H., Jang, I.-H., Pellet, N., Grätzel, M., & Park, N.-G. (2014) · Nature Nanotechnology · doi:10.1038/nnano.2014.181 · Cited by 1,759
Electro-optics of perovskite solar cells
Lin, Q., Armin, A., Nagiri, R. C. R., Burn, P. L., & Meredith, P. (2015) · Nature Photonics · doi:10.1038/nphoton.2014.284 · Cited by 1,749
Maximizing and stabilizing luminescence from halide perovskites with potassium passivation
Abdi-Jalebi, M., Andaji-Garmaroudi, Z., Cacovich, S., Stavrakas, C., Philippe, B., Richter, J. M., Alsari, M., Booker, E. P., Hutter, E. M., Pearson, A. J., et al. (2018) · Nature · doi:10.1038/nature25989 · Cited by 1,734
Sutherland, B. R., & Sargent, E. H. (2016) · Nature Photonics · doi:10.1038/nphoton.2016.62 · Cited by 1,730
Noel, N. K., Abate, A., Stranks, S. D., Parrott, E. S., Burlakov, V. M., Goriely, A., & Snaith, H. J. (2014) · ACS Nano · doi:10.1021/nn5036476 · Cited by 1,709
Xiao, Z., Dong, Q., Bi, C., Shao, Y., Yuan, Y., & Huang, J. (2014) · Advanced Materials · doi:10.1002/adma.201401685 · Cited by 1,703
Cs2AgBiX6 (X = Br, Cl): New Visible Light Absorbing, Lead-Free Halide Perovskite Semiconductors
McClure, E. T., Ball, M. R., Windl, W., & Woodward, P. M. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b04231 · Cited by 1,674
Formamidinium and Cesium Hybridization for Photo‐ and Moisture‐Stable Perovskite Solar Cell
Lee, J., Kim, D., Kim, H., Seo, S., Cho, S. M., & Park, N. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201501310 · Cited by 1,663
Low-temperature processed meso-superstructured to thin-film perovskite solar cells
Ball, J. M., Lee, M. M., Hey, A., & Snaith, H. J. (2013) · Energy & Environmental Science · doi:10.1039/c3ee40810h · Cited by 1,662
Bi, C., Wang, Q., Shao, Y., Yuan, Y., Xiao, Z., & Huang, J. (2015) · Nature Communications · doi:10.1038/ncomms8747 · Cited by 1,660
Xiao, M., Huang, F., Huang, W., Dkhissi, Y., Zhu, Y., Etheridge, J., Gray‐Weale, A., Bach, U., Cheng, Y., & Spiccia, L. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201405334 · Cited by 1,630
Giant switchable photovoltaic effect in organometal trihalide perovskite devices
Xiao, Z., Yuan, Y., Shao, Y., Wang, Q., Dong, Q., Bi, C., Sharma, P., Gruverman, A., & Huang, J. (2015) · Nature Materials · doi:10.1038/nmat4150 · Cited by 1,625
Stoumpos, C. C., Malliakas, C. D., Peters, J. A., Liu, Z., Sebastian, M., Im, J., Chasapis, T. C., Wibowo, A. C., Chung, D. Y., Freeman, A. J., et al. (2013) · Crystal Growth & Design · doi:10.1021/cg400645t · Cited by 1,596
Perovskite Solar Cells: From Materials to Devices
Jung, H. S., & Park, N. (2015) · Small · doi:10.1002/smll.201402767 · Cited by 1,587
Bandgap‐Tunable Cesium Lead Halide Perovskites with High Thermal Stability for Efficient Solar Cells
Sutton, R. J., Eperon, G. E., Miranda, L., Parrott, E. S., Kamino, B. A., Patel, J. B., Hörantner, M. T., Johnston, M. B., Haghighirad, A. A., Moore, D. T., et al. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502458 · Cited by 1,571
23.6%-efficient monolithic perovskite/silicon tandem solar cells with improved stability
Bush, K. A., Palmstrom, A. F., Yu, Z. J., Boccard, M., Cheacharoen, R., Mailoa, J. P., McMeekin, D. P., Hoye, R. L. Z., Bailie, C. D., Leijtens, T., et al. (2017) · Nature Energy · doi:10.1038/nenergy.2017.9 · Cited by 1,545
Chen, Q., Zhou, H., Song, T.-B., Luo, S., Hong, Z., Duan, H.-S., Dou, L., Liu, Y., & Yang, Y. (2014) · Nano Letters · doi:10.1021/nl501838y · Cited by 1,543
Hao, F., Stoumpos, C. C., Chang, R. P. H., & Kanatzidis, M. G. (2014) · Journal of the American Chemical Society · doi:10.1021/ja5033259 · Cited by 1,501
Perovskite-perovskite tandem photovoltaics with optimized band gaps
Eperon, G. E., Leijtens, T., Bush, K. A., Prasanna, R., Green, T., Wang, J. T.-W., McMeekin, D. P., Volonakis, G., Milot, R. L., May, R., et al. (2016) · Science · doi:10.1126/science.aaf9717 · Cited by 1,499
Highly narrowband perovskite single-crystal photodetectors enabled by surface-charge recombination
Fang, Y., Dong, Q., Shao, Y., Yuan, Y., & Huang, J. (2015) · Nature Photonics · doi:10.1038/nphoton.2015.156 · Cited by 1,470
Liang, P., Liao, C., Chueh, C., Zuo, F., Williams, S. T., Xin, X., Lin, J., & Jen, A. K. ‐. (2014) · Advanced Materials · doi:10.1002/adma.201400231 · Cited by 1,452
Handbook of Photovoltaic Science and Engineering
(2010) · Wiley eBooks · doi:10.1002/9780470974704 · Cited by 1,390
Efficient perovskite light-emitting diodes featuring nanometre-sized crystallites
Xiao, Z., Kerner, R. A., Zhao, L., Tran, N. L., Lee, K. M., Koh, T.-W., Scholes, G. D., & Rand, B. P. (2017) · Nature Photonics · doi:10.1038/nphoton.2016.269 · Cited by 1,374
Yang, J., Siempelkamp, B. D., Liu, D., & Kelly, T. L. (2015) · ACS Nano · doi:10.1021/nn506864k · Cited by 1,351
Yi, C., Luo, J., Meloni, S., Boziki, A., Ashari-Astani, N., Grätzel, C., Zakeeruddin, S. M., Röthlisberger, U., & Grätzel, M. (2016) · Energy & Environmental Science · doi:10.1039/c5ee03255e · Cited by 1,281
Sherkar, T. S., Momblona, C., Gil-Escrig, L., Ávila, J., Sessolo, M., Bolink, H. J., & Koster, L. J. A. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00236 · Cited by 1,280
Bismuth Based Hybrid Perovskites A3Bi2I9 (A: Methylammonium or Cesium) for Solar Cell Application
Park, B., Philippe, B., Zhang, X., Rensmo, H., Boschloo, G., & Johansson, E. M. J. (2015) · Advanced Materials · doi:10.1002/adma.201501978 · Cited by 1,269
Xiao, Z., Bi, C., Shao, Y., Dong, Q., Wang, Q., Yuan, Y., Wang, C., Gao, Y., & Huang, J. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01138d · Cited by 1,234
Scherer, G. W. (1999) · Cement and Concrete Research · doi:10.1016/s0008-8846(99)00002-2 · Cited by 1,213
Lead‐Free Halide Perovskite Solar Cells with High Photocurrents Realized Through Vacancy Modulation
Kumar, M. H., Dharani, S., Leong, W. L., Boix, P. P., Prabhakar, R. R., Baikie, T., Shi, C., Ding, H., Ramesh, R., Asta, M., et al. (2014) · Advanced Materials · doi:10.1002/adma.201401991 · Cited by 1,209
Printable organometallic perovskite enables large-area, low-dose X-ray imaging
Kim, Y. C., Kim, K. H., Son, D.-Y., Jeong, D.-N., Seo, J.-Y., Choi, Y. S., Han, I. T., Lee, S. Y., & Park, N.-G. (2017) · Nature · doi:10.1038/nature24032 · Cited by 1,206
Cs2InAgCl6: A New Lead-Free Halide Double Perovskite with Direct Band Gap
Volonakis, G., Haghighirad, A. A., Milot, R. L., Sio, W. H., Filip, M. R., Wenger, B., Johnston, M. B., Herz, L. M., Snaith, H. J., & Giustino, F. (2017) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.6b02682 · Cited by 1,176
Scalable fabrication of perovskite solar cells
Li, Z., Klein, T. R., Kim, D. H., Yang, M., Berry, J. J., van Hest, M. F. A. M., & Zhu, K. (2018) · Nature Reviews Materials · doi:10.1038/natrevmats.2018.17 · Cited by 1,166
Colloidally prepared La-doped BaSnO 3 electrodes for efficient, photostable perovskite solar cells
Shin, S. S., Yeom, E. J., Yang, W. S., Hur, S., Kim, M. G., Im, J., Seo, J., Noh, J. H., & Seok, S. I. (2017) · Science · doi:10.1126/science.aam6620 · Cited by 1,163
Formability of ABX 3 (X = F, Cl, Br, I) halide perovskites
Li, C., Lu, X., Ding, W., Feng, L., Gao, Y., & Guo, Z. (2008) · Acta Crystallographica Section B Structural Science · doi:10.1107/s0108768108032734 · Cited by 1,161
Lead-Free Halide Double Perovskites via Heterovalent Substitution of Noble Metals
Volonakis, G., Filip, M. R., Haghighirad, A. A., Sakai, N., Wenger, B., Snaith, H. J., & Giustino, F. (2016) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.6b00376 · Cited by 1,146
Cesium Lead Halide Perovskites with Improved Stability for Tandem Solar Cells
Beal, R. E., Slotcavage, D. J., Leijtens, T., Bowring, A. R., Belisle, R. A., Nguyen, W. H., Burkhard, G. F., Hoke, E. T., & McGehee, M. D. (2016) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.6b00002 · Cited by 1,136
Kulbak, M., Cahen, D., & Hodes, G. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b00968 · Cited by 1,103
Intrinsic White-Light Emission from Layered Hybrid Perovskites
Dohner, E. R., Jaffe, A., Bradshaw, L. R., & Karunadasa, H. I. (2014) · Journal of the American Chemical Society · doi:10.1021/ja507086b · Cited by 1,077
Lewis Acid–Base Adduct Approach for High Efficiency Perovskite Solar Cells
Lee, J.-W., Kim, H.-S., & Park, N.-G. (2016) · Accounts of Chemical Research · doi:10.1021/acs.accounts.5b00440 · Cited by 1,067
Self-formed grain boundary healing layer for highly efficient CH3NH3PbI3 perovskite solar cells
Son, D.-Y., Lee, J.-W., Choi, Y. J., Jang, I.-H., Lee, S., Yoo, P. J., Shin, H., Ahn, N., Choi, M., Kim, D., et al. (2016) · Nature Energy · doi:10.1038/nenergy.2016.81 · Cited by 1,053
Hybrid Dion–Jacobson 2D Lead Iodide Perovskites
Mao, L., Ke, W., Pedesseau, L., Wu, Y., Katan, C., Even, J., Wasielewski, M. R., Stoumpos, C. C., & Kanatzidis, M. G. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b00542 · Cited by 980
CH3NH3SnxPb(1–x)I3 Perovskite Solar Cells Covering up to 1060 nm
Ogomi, Y., Morita, A., Tsukamoto, S., Saitho, T., Fujikawa, N., Shen, Q., Toyoda, T., Yoshino, K., Pandey, S. S., Ma, T., et al. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz5002117 · Cited by 978
Enhanced mobility CsPbI 3 quantum dot arrays for record-efficiency, high-voltage photovoltaic cells
Sanehira, E. M., Marshall, A. R., Christians, J. A., Harvey, S. P., Ciesielski, P. N., Wheeler, L. M., Schulz, P., Lin, L. Y., Beard, M. C., & Luther, J. M. (2017) · Science Advances · doi:10.1126/sciadv.aao4204 · Cited by 977
Zhao, J., Deng, Y., Wei, H., Zheng, X., Yu, Z., Shao, Y., Shield, J. E., & Huang, J. (2017) · Science Advances · doi:10.1126/sciadv.aao5616 · Cited by 974
Stress from crystallization of salt
Scherer, G. W. (2004) · Cement and Concrete Research · doi:10.1016/j.cemconres.2003.12.034 · Cited by 969
Zhumekenov, A. A., Saidaminov, M. I., Haque, M. A., Alarousu, E., Sarmah, S. P., Murali, B., Dursun, I., Miao, X.-H., Abdelhady, A. L., Wu, T., et al. (2016) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00002 · Cited by 952
Templating and structural engineering in organic–inorganic perovskites
Mitzi, D. B. (2001) · Journal of the Chemical Society, Dalton Transactions · doi:10.1039/b007070j · Cited by 945
Self-citationToward Large Scale Roll‐to‐Roll Production of Fully Printed Perovskite Solar Cells
Hwang, K., Jung, Y., Heo, Y., Scholes, F. H., Watkins, S. E., Subbiah, J., Jones, D. J., Kim, D., & Vak, D. (2015) · Advanced Materials · doi:10.1002/adma.201404598 · Cited by 930
Zhang, W., Saliba, M., Moore, D. T., Pathak, S. K., Hörantner, M. T., Stergiopoulos, T., Stranks, S. D., Eperon, G. E., Alexander-Webber, J. A., Abate, A., et al. (2015) · Nature Communications · doi:10.1038/ncomms7142 · Cited by 920
Highly Reproducible Sn‐Based Hybrid Perovskite Solar Cells with 9% Efficiency
Shao, S., Liu, J., Portale, G., Fang, H., Blake, G. R., ten Brink, G. H., Koster, L. J. A., & Loi, M. A. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702019 · Cited by 904
Unreacted PbI2 as a Double-Edged Sword for Enhancing the Performance of Perovskite Solar Cells
Jacobsson, T. J., Correa-Baena, J.-P., Halvani Anaraki, E., Philippe, B., Stranks, S. D., Bouduban, M. E. F., Tress, W., Schenk, K., Teuscher, J., Moser, J.-E., et al. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b06320 · Cited by 901
(2020) · INDIGO (University of Illinois at Chicago) · doi:10.1021/jacs.5b13294.s002 · Cited by 892
Wu, Y., Islam, A., Yang, X., Qin, C., Liu, J., Zhang, K., Peng, W., & Han, L. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01624f · Cited by 887
Wang, Q., Chen, B., Liu, Y., Deng, Y., Bai, Y., Dong, Q., & Huang, J. (2017) · Energy & Environmental Science · doi:10.1039/c6ee02941h · Cited by 886
Liotta, S. (1965) · Journal of the American Chemical Society · doi:10.1021/ja01084a069 · Cited by 883
Liao, Y., Liu, H., Zhou, W., Yang, D., Shang, Y., Shi, Z., Li, B., Jiang, X., Zhang, L., Quan, L. N., et al. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b01815 · Cited by 877
Ultra-bright and highly efficient inorganic based perovskite light-emitting diodes
Zhang, L., Yang, X., Jiang, Q., Wang, P., Yin, Z., Zhang, X., Tan, H., Yang, Y., Wei, M., Sutherland, B. R., et al. (2017) · Nature Communications · doi:10.1038/ncomms15640 · Cited by 857
Wang, Q., Shao, Y., Dong, Q., Xiao, Z., Yuan, Y., & Huang, J. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee00233d · Cited by 832
Tailored interfaces of unencapsulated perovskite solar cells for >1,000 hour operational stability
Christians, J. A., Schulz, P., Tinkham, J. S., Schloemer, T. H., Harvey, S. P., Tremolet de Villers, B. J., Sellinger, A., Berry, J. J., & Luther, J. M. (2018) · Nature Energy · doi:10.1038/s41560-017-0067-y · Cited by 828
Lee, S. J., Shin, S. S., Kim, Y. C., Kim, D., Ahn, T. K., Noh, J. H., Seo, J., & Seok, S. I. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b00142 · Cited by 817
Thin-Film Preparation and Characterization of Cs3Sb2I9: A Lead-Free Layered Perovskite Semiconductor
Saparov, B., Hong, F., Sun, J.-P., Duan, H.-S., Meng, W., Cameron, S., Hill, I. G., Yan, Y., & Mitzi, D. B. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b01989 · Cited by 812
Self-citationSynthesis, Structure, and Properties of Organic‐Inorganic Perovskites and Related Materials
Mitzi, D. B. (1999) · Progress in Inorganic Chemistry · doi:10.1002/9780470166499.ch1 · Cited by 805
Self-citationColella, S., Mosconi, E., Fedeli, P., Listorti, A., Gazza, F., Orlandi, F., Ferro, P., Besagni, T., Rizzo, A., Calestani, G., et al. (2013) · Chemistry of Materials · doi:10.1021/cm402919x · Cited by 796
Liao, W., Zhao, D., Yu, Y., Grice, C. R., Wang, C., Cimaroli, A. J., Schulz, P., Meng, W., Zhu, K., Xiong, R., et al. (2016) · Advanced Materials · doi:10.1002/adma.201602992 · Cited by 793
Deng, Y., Zheng, X., Bai, Y., Wang, Q., Zhao, J., & Huang, J. (2018) · Nature Energy · doi:10.1038/s41560-018-0153-9 · Cited by 791
Koh, T. M., Fu, K., Fang, Y., Chen, S., Sum, T. C., Mathews, N., Mhaisalkar, S. G., Boix, P. P., & Baikie, T. (2014) · The Journal of Physical Chemistry C · doi:10.1021/jp411112k · Cited by 790
Moisture assisted perovskite film growth for high performance solar cells
You, J., Yang, Y. (., Hong, Z., Song, T.-B., Meng, L., Liu, Y., Jiang, C., Zhou, H., Chang, W.-H., Li, G., et al. (2014) · Applied Physics Letters · doi:10.1063/1.4901510 · Cited by 786
Zhao, D., Yu, Y., Wang, C., Liao, W., Shrestha, N., Grice, C. R., Cimaroli, A. J., Guan, L., Ellingson, R. J., Zhu, K., et al. (2017) · Nature Energy · doi:10.1038/nenergy.2017.18 · Cited by 776
Highly stable, phase pure Cs2AgBiBr6 double perovskite thin films for optoelectronic applications
Greul, E., Petrus, M. L., Binek, A., Docampo, P., & Bein, T. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta06816f · Cited by 772
Materials Processing Routes to Trap-Free Halide Perovskites
Buin, A., Pietsch, P., Xu, J., Voznyy, O., Ip, A. H., Comin, R., & Sargent, E. H. (2014) · Nano Letters · doi:10.1021/nl502612m · Cited by 768
Zhang, W., Pathak, S., Sakai, N., Stergiopoulos, T., Nayak, P. K., Noel, N. K., Haghighirad, A. A., Burlakov, V. M., deQuilettes, D. W., Sadhanala, A., et al. (2015) · Nature Communications · doi:10.1038/ncomms10030 · Cited by 766
Efficient planar heterojunction mixed-halide perovskite solar cells deposited via spray-deposition
Barrows, A. T., Pearson, A. J., Kwak, C. K., Dunbar, A. D. F., Buckley, A. R., & Lidzey, D. G. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01546k · Cited by 765
Forging Colloidal Nanostructures via Cation Exchange Reactions
De Trizio, L., & Manna, L. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00739 · Cited by 761
Hao, F., Stoumpos, C. C., Guo, P., Zhou, N., Marks, T. J., Chang, R. P. H., & Kanatzidis, M. G. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b06658 · Cited by 759
Yan, K., Long, M., Zhang, T., Wei, Z., Chen, H., Yang, S., & Xu, J. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b00321 · Cited by 739
Deng, Y., Peng, E., Shao, Y., Xiao, Z., Dong, Q., & Huang, J. (2015) · Energy & Environmental Science · doi:10.1039/c4ee03907f · Cited by 719
Mitzi, D. B., Chondroudis, K., & Kagan, C. R. (2001) · IBM Journal of Research and Development · doi:10.1147/rd.451.0029 · Cited by 714
Self-citationLight-Induced Phase Segregation in Halide-Perovskite Absorbers
Slotcavage, D. J., Karunadasa, H. I., & McGehee, M. D. (2016) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00495 · Cited by 712
Interface energetics in organo-metal halide perovskite-based photovoltaic cells
Schulz, P., Edri, E., Kirmayer, S., Hodes, G., Cahen, D., & Kahn, A. (2014) · Energy & Environmental Science · doi:10.1039/c4ee00168k · Cited by 710
Theoretical analysis on effect of band offsets in perovskite solar cells
Minemoto, T., & Murata, M. (2015) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2014.10.036 · Cited by 694
Local Polar Fluctuations in Lead Halide Perovskite Crystals
Yaffe, O., Guo, Y., Tan, L. Z., Egger, D. A., Hull, T., Stoumpos, C. C., Zheng, F., Heinz, T. F., Kronik, L., Kanatzidis, M. G., et al. (2017) · Physical Review Letters · doi:10.1103/physrevlett.118.136001 · Cited by 694
Iodine chemistry determines the defect tolerance of lead-halide perovskites
Meggiolaro, D., Motti, S. G., Mosconi, E., Barker, A. J., Ball, J., Andrea Riccardo Perini, C., Deschler, F., Petrozza, A., & De Angelis, F. (2018) · Energy & Environmental Science · doi:10.1039/c8ee00124c · Cited by 674
Thin single crystal perovskite solar cells to harvest below-bandgap light absorption
Chen, Z., Dong, Q., Liu, Y., Bao, C., Fang, Y., Lin, Y., Tang, S., Wang, Q., Xiao, X., Bai, Y., et al. (2017) · Nature Communications · doi:10.1038/s41467-017-02039-5 · Cited by 664
Wang, S., Jiang, Y., Juarez-Perez, E. J., Ono, L. K., & Qi, Y. (2016) · Nature Energy · doi:10.1038/nenergy.2016.195 · Cited by 661
Wei, H., DeSantis, D., Wei, W., Deng, Y., Guo, D., Savenije, T. J., Cao, L., & Huang, J. (2017) · Nature Materials · doi:10.1038/nmat4927 · Cited by 660
Zhang, T., Dar, M. I., Li, G., Xu, F., Guo, N., Grätzel, M., & Zhao, Y. (2017) · Science Advances · doi:10.1126/sciadv.1700841 · Cited by 647
Qualifying composition dependent p and n self-doping in CH3NH3PbI3
Wang, Q., Shao, Y., Xie, H., Lyu, L., Liu, X., Gao, Y., & Huang, J. (2014) · Applied Physics Letters · doi:10.1063/1.4899051 · Cited by 645
Band-gap tuning of lead halide perovskites using a sequential deposition process
Kulkarni, S. A., Baikie, T., Boix, P. P., Yantara, N., Mathews, N., & Mhaisalkar, S. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta00435c · Cited by 634
Origin of the Thermal Instability in CH3NH3PbI3 Thin Films Deposited on ZnO
Yang, J., Siempelkamp, B. D., Mosconi, E., De Angelis, F., & Kelly, T. L. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b01598 · Cited by 629
Era, M., Morimoto, S., Tsutsui, T., & Saito, S. (1994) · Applied Physics Letters · doi:10.1063/1.112265 · Cited by 625
Wang, F., Geng, W., Zhou, Y., Fang, H., Tong, C., Loi, M. A., Liu, L., & Zhao, N. (2016) · Advanced Materials · doi:10.1002/adma.201603062 · Cited by 624
Self-citationPhase Transformations in Metals and Alloys
Meyrick, G., & Powell, G. W. (1973) · Annual Review of Materials Science · doi:10.1146/annurev.ms.03.080173.001551 · Cited by 621
Saliba, M., Correa-Baena, J.-P., Wolff, C. M., Stolterfoht, M., Phung, N., Albrecht, S., Neher, D., & Abate, A. (2018) · Chemistry of Materials · doi:10.1021/acs.chemmater.8b00136 · Cited by 618
Perovskite ink with wide processing window for scalable high-efficiency solar cells
Yang, M., Li, Z., Reese, M. O., Reid, O. G., Kim, D. H., Siol, S., Klein, T. R., Yan, Y., Berry, J. J., van Hest, M. F. A. M., et al. (2017) · Nature Energy · doi:10.1038/nenergy.2017.38 · Cited by 614
Liang, K., Mitzi, D. B., & Prikas, M. T. (1998) · Chemistry of Materials · doi:10.1021/cm970568f · Cited by 612
Self-citationCesium Titanium(IV) Bromide Thin Films Based Stable Lead-free Perovskite Solar Cells
Chen, M., Ju, M.-G., Carl, A. D., Zong, Y., Grimm, R. L., Gu, J., Zeng, X. C., Zhou, Y., & Padture, N. P. (2018) · Joule · doi:10.1016/j.joule.2018.01.009 · Cited by 607
Self-citationImportance of Reducing Vapor Atmosphere in the Fabrication of Tin-Based Perovskite Solar Cells
Song, T.-B., Yokoyama, T., Stoumpos, C. C., Logsdon, J., Cao, D. H., Wasielewski, M. R., Aramaki, S., & Kanatzidis, M. G. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.6b10734 · Cited by 598
Ostwald Ripening of Two-Phase Mixtures
Voorhees, P. (1992) · Annual Review of Materials Research · doi:10.1146/annurev.matsci.22.1.197 · Cited by 590
Whitfield, P. S., Herron, N., Guise, W. E., Page, K., Cheng, Y. Q., Milas, I., & Crawford, M. K. (2016) · Scientific Reports · doi:10.1038/srep35685 · Cited by 586
High efficiency stable inverted perovskite solar cells without current hysteresis
Wu, C.-G., Chiang, C.-H., Tseng, Z.-L., Nazeeruddin, M. K., Hagfeldt, A., & Grätzel, M. (2015) · Energy & Environmental Science · doi:10.1039/c5ee00645g · Cited by 581
Ke, W., Xiao, C., Wang, C., Saparov, B., Duan, H., Zhao, D., Xiao, Z., Schulz, P., Harvey, S. P., Liao, W., et al. (2016) · Advanced Materials · doi:10.1002/adma.201600594 · Cited by 579
Self-citationThermal Behavior of Methylammonium Lead-Trihalide Perovskite Photovoltaic Light Harvesters
Dualeh, A., Gao, P., Seok, S. I., Nazeeruddin, M. K., & Grätzel, M. (2014) · Chemistry of Materials · doi:10.1021/cm502468k · Cited by 574
The Importance of Moisture in Hybrid Lead Halide Perovskite Thin Film Fabrication
Eperon, G. E., Habisreutinger, S. N., Leijtens, T., Bruijnaers, B. J., van Franeker, J. J., deQuilettes, D. W., Pathak, S., Sutton, R. J., Grancini, G., Ginger, D. S., et al. (2015) · ACS Nano · doi:10.1021/acsnano.5b03626 · Cited by 574
Singh, T., & Miyasaka, T. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201700677 · Cited by 572
De Marco, N., Zhou, H., Chen, Q., Sun, P., Liu, Z., Meng, L., Yao, E.-P., Liu, Y., Schiffer, A., & Yang, Y. (2016) · Nano Letters · doi:10.1021/acs.nanolett.5b04060 · Cited by 564
Tuning the Band Gap in Hybrid Tin Iodide Perovskite Semiconductors Using Structural Templating
Knutson, J. L., Martin, J. D., & Mitzi, D. B. (2005) · Inorganic Chemistry · doi:10.1021/ic050244q · Cited by 562
Self-citationSynthesis, Crystal Structure, and Optical and Thermal Properties of (C4H9NH3)2MI4 (M = Ge, Sn, Pb)
Mitzi, D. B. (1996) · Chemistry of Materials · doi:10.1021/cm9505097 · Cited by 561
Self-citationCan Pb-Free Halide Double Perovskites Support High-Efficiency Solar Cells?
Savory, C. N., Walsh, A., & Scanlon, D. O. (2016) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00471 · Cited by 554
Inorganic Halide Perovskites for Efficient Light-Emitting Diodes
Yantara, N., Bhaumik, S., Yan, F., Sabba, D., Dewi, H. A., Mathews, N., Boix, P. P., Demir, H. V., & Mhaisalkar, S. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b02011 · Cited by 552
Huang, F., Dkhissi, Y., Huang, W., Xiao, M., Benesperi, I., Rubanov, S., Zhu, Y., Lin, X., Jiang, L., Zhou, Y., et al. (2014) · Nano Energy · doi:10.1016/j.nanoen.2014.08.015 · Cited by 547
Self-citationCrystal growth in porous materials—I: The crystallization pressure of large crystals
Steiger, M. (2005) · Journal of Crystal Growth · doi:10.1016/j.jcrysgro.2005.05.007 · Cited by 546
Wang, Q., Zheng, X., Deng, Y., Zhao, J., Chen, Z., & Huang, J. (2017) · Joule · doi:10.1016/j.joule.2017.07.017 · Cited by 544
Solvent Vapor Annealing of Block Polymer Thin Films
Sinturel, C., Vayer, M., Morris, M., & Hillmyer, M. A. (2013) · Macromolecules · doi:10.1021/ma400735a · Cited by 543
Yang, M., Zhang, T., Schulz, P., Li, Z., Li, G., Kim, D. H., Guo, N., Berry, J. J., Zhu, K., & Zhao, Y. (2016) · Nature Communications · doi:10.1038/ncomms12305 · Cited by 540
Jodlowski, A. D., Roldán-Carmona, C., Grancini, G., Salado, M., Ralaiarisoa, M., Ahmad, S., Koch, N., Camacho, L., de Miguel, G., & Nazeeruddin, M. K. (2017) · Nature Energy · doi:10.1038/s41560-017-0054-3 · Cited by 533
Liang, J., Zhao, P., Wang, C., Wang, Y., Hu, Y., Zhu, G., Ma, L., Liu, J., & Jin, Z. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b07949 · Cited by 529
Nam, J. K., Chai, S. U., Cha, W., Choi, Y. J., Kim, W., Jung, M. S., Kwon, J., Kim, D., & Park, J. H. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b00050 · Cited by 524
Momblona, C., Gil-Escrig, L., Bandiello, E., Hutter, E. M., Sessolo, M., Lederer, K., Blochwitz-Nimoth, J., & Bolink, H. J. (2016) · Energy Environ. Sci. · doi:10.1039/c6ee02100j · Cited by 514
High‐Purity Inorganic Perovskite Films for Solar Cells with 9.72 % Efficiency
Duan, J., Zhao, Y., He, B., & Tang, Q. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201800019 · Cited by 514
Efficient and Uniform Planar‐Type Perovskite Solar Cells by Simple Sequential Vacuum Deposition
Chen, C., Kang, H., Hsiao, S., Yang, P., Chiang, K., & Lin, H. (2014) · Advanced Materials · doi:10.1002/adma.201402461 · Cited by 510
Rashba Spin–Orbit Coupling Enhanced Carrier Lifetime in CH3NH3PbI3
Zheng, F., Tan, L. Z., Liu, S., & Rappe, A. M. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b01854 · Cited by 507
Mixed‐Organic‐Cation Tin Iodide for Lead‐Free Perovskite Solar Cells with an Efficiency of 8.12%
Zhao, Z., Gu, F., Li, Y., Sun, W., Ye, S., Rao, H., Liu, Z., Bian, Z., & Huang, C. (2017) · Advanced Science · doi:10.1002/advs.201700204 · Cited by 505
Jang, D. M., Park, K., Kim, D. H., Park, J., Shojaei, F., Kang, H. S., Ahn, J.-P., Lee, J. W., & Song, J. K. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b01430 · Cited by 504
Benefit of Grain Boundaries in Organic–Inorganic Halide Planar Perovskite Solar Cells
Yun, J. S., Ho-Baillie, A., Huang, S., Woo, S. H., Heo, Y., Seidel, J., Huang, F., Cheng, Y.-B., & Green, M. A. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b00182 · Cited by 502
Xie, F., Chen, C., Wu, Y., Li, X., Cai, M., Liu, X., Yang, X., & Han, L. (2017) · Energy & Environmental Science · doi:10.1039/c7ee01675a · Cited by 499
Im, J.-H., Kim, H.-S., & Park, N.-G. (2014) · APL MATERIALS · doi:10.1063/1.4891275 · Cited by 495
Chondroudis, K., & Mitzi, D. B. (1999) · Chemistry of Materials · doi:10.1021/cm990561t · Cited by 490
Self-citationWhat Is Moving in Hybrid Halide Perovskite Solar Cells?
Frost, J. M., & Walsh, A. (2016) · Accounts of Chemical Research · doi:10.1021/acs.accounts.5b00431 · Cited by 490
Cation Exchange: A Versatile Tool for Nanomaterials Synthesis
Beberwyck, B. J., Surendranath, Y., & Alivisatos, A. P. (2013) · The Journal of Physical Chemistry C · doi:10.1021/jp405989z · Cited by 484
Ju, M.-G., Chen, M., Zhou, Y., Garces, H. F., Dai, J., Ma, L., Padture, N. P., & Zeng, X. C. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.7b01167 · Cited by 476
Self-citation
Cited by
Li, X., Hoffman, J. M., & Kanatzidis, M. G. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c01006 · Cited by 1,085
Scalable fabrication and coating methods for perovskite solar cells and solar modules
Park, N.-G., & Zhu, K. (2020) · Nature Reviews Materials · doi:10.1038/s41578-019-0176-2 · Cited by 908
Chemical stability and instability of inorganic halide perovskites
Zhou, Y., & Zhao, Y. (2019) · Energy & Environmental Science · doi:10.1039/c8ee03559h · Cited by 784
Self-citationAdvances in two-dimensional organic–inorganic hybrid perovskites
Zhang, F., Lu, H., Tong, J., Berry, J. J., Beard, M. C., & Zhu, K. (2020) · Energy & Environmental Science · doi:10.1039/c9ee03757h · Cited by 627
Interfacial toughening with self-assembled monolayers enhances perovskite solar cell reliability
Dai, Z., Yadavalli, S. K., Chen, M., Abbaspourtamijani, A., Qi, Y., & Padture, N. P. (2021) · Science · doi:10.1126/science.abf5602 · Cited by 625
Self-citation
Metadata
- Authors
- Dunlap-Shohl, W. A., Zhou, Y., Padture, N. P., & Mitzi, D. B.
- Venue
- Chemical Reviews
- Publisher
- American Chemical Society (ACS)
- Published
- 2018-11-02
- Volume
- 119
- Issue
- 5
- Pages
- 3193-3295
- ISSN
- 0009-2665 (ISSN-L)
- 1520-6890
- OpenAlex
- W2899044790
- Cited by
- 631
- References
- 500
- FWCI
- 4.58
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.