The DOI matches its Crossref record; 338 of the 338 references it cites were found in a registry or an index.
Sodium Metal Anodes: Emerging Solutions to Dendrite Growth
Abstract
This comprehensive Review focuses on the key challenges and recent progress regarding sodium-metal anodes employed in sodium-metal batteries (SMBs). The metal anode is the essential component of emerging energy storage systems such as sodium sulfur and sodium selenium, which are discussed as example full-cell applications. We begin with a description of the differences in the chemical and physical properties of Na metal versus the oft-studied Li metal, and a corresponding discussion regarding the number of ways in which Na does not follow Li-inherited paradigms in its electrochemical behavior. We detail the major challenges for Na-metal systems that at this time limit the feasibility of SMBs. The core Na anode problems are the following interrelated degradation mechanisms: An unstable solid electrolyte interphase with most organic electrolytes, “mossy” and “lath-like” metal dendrite growth for liquid systems, poor Coulombic efficiency, and gas evolution. Even solid-state Na batteries are not immune, with metal dendrites being reported. The solutions may be subdivided into the following interrelated taxonomy: Improved electrolytes and electrolyte additives tailored for Na-metal anodes, interfacial engineering between the metal and the liquid or solid electrolyte, electrode architectures that both reduce the current density during plating–stripping and serve as effective hosts that shield the Na metal from excessive reactions, and alloy design to tune the bulk properties of the metal per se. For instance, stable plating–stripping of Na is extremely difficult with conventional carbonate solvents but has been reported with ethers and glymes. Solid-state electrolytes (SSEs) such as beta-alumina solid electrolyte (BASE), sodium superionic conductor (NASICON), and sodium thiophosphate (75Na 2 S·25P 2 S 5 ) present highly exciting opportunities for SMBs that avoid the dangers of flammable liquids. Even SSEs are not immune to dendrites, however, which grow through the defects in the bulk pellet, but may be controlled through interfacial energy modification. We conclude with a discussion of the key research areas that we feel are the most fruitful for further pursuit. In our opinion, greatly improved understanding and control of the SEI structure is the key to cycling stability. A holistic approach involving complementary post-mortem, in situ, and operando analyses to elucidate full battery cell level structure–performance relations is advocated.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Items 201–338 of 338
Guin, M., & Tietz, F. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.09.137 · Cited by 301
Zhamu, A., Chen, G., Liu, C., Neff, D., Fang, Q., Yu, Z., Xiong, W., Wang, Y., Wang, X., & Jang, B. Z. (2012) · Energy Environ. Sci. · doi:10.1039/c2ee02911a · Cited by 300
Electrochemical behaviors of a Li3N modified Li metal electrode in secondary lithium batteries
Wu, M., Wen, Z., Liu, Y., Wang, X., & Huang, L. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.05.035 · Cited by 298
Shi, S., Qi, Y., Li, H., & Hector, L. G. (2013) · The Journal of Physical Chemistry C · doi:10.1021/jp310591u · Cited by 294
Van der Waals density functional study of the energetics of alkali metal intercalation in graphite
Wang, Z., Selbach, S. M., & Grande, T. (2014) · RSC Adv. · doi:10.1039/c3ra47187j · Cited by 291
Chu, I.-H., Kompella, C. S., Nguyen, H., Zhu, Z., Hy, S., Deng, Z., Meng, Y. S., & Ong, S. P. (2016) · Scientific Reports · doi:10.1038/srep33733 · Cited by 290
Ion–Solvent Complexes Promote Gas Evolution from Electrolytes on a Sodium Metal Anode
Chen, X., Shen, X., Li, B., Peng, H., Cheng, X., Li, B., Zhang, X., Huang, J., & Zhang, Q. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201711552 · Cited by 287
Topochemical reactions of rutile related structures with lithium
Murphy, D. W., Di Salvo, F. J., Carides, J. N., & Waszczak, J. V. (1978) · Materials Research Bulletin · doi:10.1016/0025-5408(78)90131-9 · Cited by 286
Zeng, L., Zeng, W., Jiang, Y., Wei, X., Li, W., Yang, C., Zhu, Y., & Yu, Y. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201401377 · Cited by 285
Luo, W., Zhang, Y., Xu, S., Dai, J., Hitz, E., Li, Y., Yang, C., Chen, C., Liu, B., & Hu, L. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b01138 · Cited by 285
Steiger, J., Kramer, D., & Mönig, R. (2014) · Electrochimica Acta · doi:10.1016/j.electacta.2014.05.120 · Cited by 284
Inorganic–Organic Coating via Molecular Layer Deposition Enables Long Life Sodium Metal Anode
Zhao, Y., Goncharova, L. V., Zhang, Q., Kaghazchi, P., Sun, Q., Lushington, A., Wang, B., Li, R., & Sun, X. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b02464 · Cited by 284
Why Bis(fluorosulfonyl)imide Is a “Magic Anion” for Electrochemistry
Shkrob, I. A., Marin, T. W., Zhu, Y., & Abraham, D. P. (2014) · The Journal of Physical Chemistry C · doi:10.1021/jp506567p · Cited by 281
Alternative strategy for a safe rechargeable battery
Braga, M. H., Grundish, N. S., Murchison, A. J., & Goodenough, J. B. (2017) · Energy & Environmental Science · doi:10.1039/c6ee02888h · Cited by 279
Li, Z., Zhang, J., Lu, Y., & Lou, X. W. (. (2018) · Science Advances · doi:10.1126/sciadv.aat1687 · Cited by 279
Current trends and future challenges of electrolytes for sodium-ion batteries
Vignarooban, K., Kushagra, R., Elango, A., Badami, P., Mellander, B.-E., Xu, X., Tucker, T. G., Nam, C., & Kannan, A. M. (2016) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2015.12.090 · Cited by 278
Wenzel, S., Leichtweiss, T., Weber, D. A., Sann, J., Zeier, W. G., & Janek, J. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b10119 · Cited by 275
A comprehensive study on the cell chemistry of the sodium superoxide (NaO2) battery
Hartmann, P., Bender, C. L., Sann, J., Dürr, A. K., Jansen, M., Janek, J., & Adelhelm, P. (2013) · Physical Chemistry Chemical Physics · doi:10.1039/c3cp50930c · Cited by 273
Lee, J., Lee, Y., Lee, J., Lee, S.-M., Choi, J.-H., Kim, H., Kwon, M.-S., Kang, K., Lee, K. T., & Choi, N.-S. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b14878 · Cited by 273
Self-citationLiquid K–Na Alloy Anode Enables Dendrite‐Free Potassium Batteries
Xue, L., Gao, H., Zhou, W., Xin, S., Park, K., Li, Y., & Goodenough, J. B. (2016) · Advanced Materials · doi:10.1002/adma.201602633 · Cited by 269
Highly Stable Sodium Batteries Enabled by Functional Ionic Polymer Membranes
Wei, S., Choudhury, S., Xu, J., Nath, P., Tu, Z., & Archer, L. A. (2017) · Advanced Materials · doi:10.1002/adma.201605512 · Cited by 267
Alkali Metal Anodes for Rechargeable Batteries
Wang, H., Yu, D., Kuang, C., Cheng, L., Li, W., Feng, X., Zhang, Z., Zhang, X., & Zhang, Y. (2019) · Chem · doi:10.1016/j.chempr.2018.11.005 · Cited by 266
A Cyclable Lithium Organic Electrolyte Cell Based on Two Intercalation Electrodes
Lazzari, M., & Scrosati, B. (1980) · Journal of The Electrochemical Society · doi:10.1149/1.2129753 · Cited by 263
Zhu, Z., Chu, I.-H., Deng, Z., & Ong, S. P. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b03656 · Cited by 258
Stabilizing a High-Energy-Density Rechargeable Sodium Battery with a Solid Electrolyte
Gao, H., Xin, S., Xue, L., & Goodenough, J. B. (2018) · Chem · doi:10.1016/j.chempr.2018.01.007 · Cited by 254
Recent research trends in Li–S batteries
Kumar, R., Liu, J., Hwang, J.-Y., & Sun, Y.-K. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta01483c · Cited by 254
Lee, H., Lee, D. J., Kim, Y.-J., Park, J.-K., & Kim, H.-T. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.03.004 · Cited by 245
Water sorption in ionic liquids: kinetics, mechanisms and hydrophilicity
Cao, Y., Chen, Y., Sun, X., Zhang, Z., & Mu, T. (2012) · Physical Chemistry Chemical Physics · doi:10.1039/c2cp41798g · Cited by 245
The critical role of lithium nitrate in the gas evolution of lithium–sulfur batteries
Jozwiuk, A., Berkes, B. B., Weiss, T. M., et al. (2016) · Energy & Environmental Science · doi:10.1039/c6ee00789a · Cited by 245
Lee, D. J., Lee, H., Kim, Y., Park, J., & Kim, H. (2016) · Advanced Materials · doi:10.1002/adma.201503169 · Cited by 244
Nonflammable perfluoropolyether-based electrolytes for lithium batteries
Wong, D. H. C., Thelen, J. L., Fu, Y., Devaux, D., Pandya, A. A., Battaglia, V. S., Balsara, N. P., & DeSimone, J. M. (2014) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1314615111 · Cited by 235
Tuning the Solid Electrolyte Interphase for Selective Li‐ and Na‐Ion Storage in Hard Carbon
Soto, F. A., Yan, P., Engelhard, M. H., Marzouk, A., Wang, C., Xu, G., Chen, Z., Amine, K., Liu, J., Sprenkle, V. L., et al. (2017) · Advanced Materials · doi:10.1002/adma.201606860 · Cited by 234
Quasi–solid state rechargeable Na-CO 2 batteries with reduced graphene oxide Na anodes
Hu, X., Li, Z., Zhao, Y., Sun, J., Zhao, Q., Wang, J., Tao, Z., & Chen, J. (2017) · Science Advances · doi:10.1126/sciadv.1602396 · Cited by 233
Suppression of dendritic lithium growth in lithium metal-based batteries
Li, L., Li, S., & Lu, Y. (2018) · Chemical Communications · doi:10.1039/c8cc02280a · Cited by 232
Wang, H., Wang, C., Matios, E., & Li, W. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b03071 · Cited by 230
Origin of non-SEI related coulombic efficiency loss in carbons tested against Na and Li
Memarzadeh Lotfabad, E., Kalisvaart, P., Kohandehghan, A., Karpuzov, D., & Mitlin, D. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta04995k · Cited by 226
Self-citationCapacity Enhancement and Discharge Mechanisms of Room‐Temperature Sodium–Sulfur Batteries
Yu, X., & Manthiram, A. (2014) · ChemElectroChem · doi:10.1002/celc.201402112 · Cited by 221
A Model for Predicting Capacity Fade due to SEI Formation in a Commercial Graphite/LiFePO4Cell
Ekström, H., & Lindbergh, G. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0641506jes · Cited by 221
Zhang, B., Metzger, M., Solchenbach, S., Payne, M., Meini, S., Gasteiger, H. A., Garsuch, A., & Lucht, B. L. (2015) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.5b00072 · Cited by 221
Processable and Moldable Sodium‐Metal Anodes
Wang, A., Hu, X., Tang, H., Zhang, C., Liu, S., Yang, Y., Yang, Q., & Luo, J. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201703937 · Cited by 221
Protected lithium anode with porous Al2O3layer for lithium–sulfur battery
Jing, H.-K., Kong, L.-L., Liu, S., Li, G.-R., & Gao, X.-P. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta01490e · Cited by 220
Wang, J., Lin, F., Jia, H., Yang, J., Monroe, C. W., & NuLi, Y. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201405157 · Cited by 220
Ding, J., Zhou, H., Zhang, H., Stephenson, T., Li, Z., Karpuzov, D., & Mitlin, D. (2017) · Energy & Environmental Science · doi:10.1039/c6ee02274j · Cited by 220
Self-citationYu, Z., Shang, S., Seo, J., Wang, D., Luo, X., Huang, Q., Chen, S., Lu, J. B., Li, X., Liu, Z., et al. (2017) · Advanced Materials · doi:10.1002/adma.201605561 · Cited by 220
Tian, H., Seh, Z. W., Yan, K., Fu, Z., Tang, P., Lu, Y., Zhang, R., Legut, D., Cui, Y., & Zhang, Q. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602528 · Cited by 217
Shin, B. R., Nam, Y. J., Oh, D. Y., Kim, D. H., Kim, J. W., & Jung, Y. S. (2014) · Electrochimica Acta · doi:10.1016/j.electacta.2014.08.139 · Cited by 214
Ionic liquid-based electrolytes for “beyond lithium” battery technologies
Giffin, G. A. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta05260f · Cited by 214
Flexible Electrodes for Sodium‐Ion Batteries: Recent Progress and Perspectives
Wang, H., Li, W., Liu, D., Feng, X., Wang, J., Yang, X., Zhang, X., Zhu, Y., & Zhang, Y. (2017) · Advanced Materials · doi:10.1002/adma.201703012 · Cited by 212
Suppression of dendritic lithium formation by using concentrated electrolyte solutions
Jeong, S.-K., Seo, H.-Y., Kim, D.-H., Han, H.-K., Kim, J.-G., Lee, Y. B., Iriyama, Y., Abe, T., & Ogumi, Z. (2008) · Electrochemistry Communications · doi:10.1016/j.elecom.2008.02.006 · Cited by 211
A Plastic–Crystal Electrolyte Interphase for All‐Solid‐State Sodium Batteries
Gao, H., Xue, L., Xin, S., Park, K., & Goodenough, J. B. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201702003 · Cited by 210
Na Reactivity toward Carbonate-Based Electrolytes: The Effect of FEC as Additive
Dugas, R., Ponrouch, A., Gachot, G., David, R., Palacin, M. R., & Tarascon, J. M. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.0981610jes · Cited by 208
Zhang, J., Wang, R., Yang, X., Lu, W., Wu, X., Wang, X., Li, H., & Chen, L. (2012) · Nano Letters · doi:10.1021/nl300570d · Cited by 207
Electrocatalytic transformation of HF impurity to H2 and LiF in lithium-ion batteries
Strmcnik, D., Castelli, I. E., Connell, J. G., Haering, D., Zorko, M., Martins, P., Lopes, P. P., Genorio, B., Østergaard, T., Gasteiger, H. A., et al. (2018) · Nature Catalysis · doi:10.1038/s41929-018-0047-z · Cited by 207
Jarry, A., Gottis, S., Yu, Y.-S., Roque-Rosell, J., Kim, C., Cabana, J., Kerr, J., & Kostecki, R. (2015) · Journal of the American Chemical Society · doi:10.1021/ja5116698 · Cited by 206
Yu, X., & Manthiram, A. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b04588 · Cited by 205
Wang, H., Wang, C., Matios, E., & Li, W. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201801818 · Cited by 205
Atomic-Layer-Deposition Oxide Nanoglue for Sodium Ion Batteries
Han, X., Liu, Y., Jia, Z., Chen, Y.-C., Wan, J., Weadock, N., Gaskell, K. J., Li, T., & Hu, L. (2014) · Nano Letters · doi:10.1021/nl4035626 · Cited by 204
An ex-situ nitridation route to synthesize Li 3 N-modified Li anodes for lithium secondary batteries
Zhang, Y. J., Wang, W., Tang, H., Bai, W. Q., Ge, X., Wang, X. L., Gu, C. D., & Tu, J. P. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.12.023 · Cited by 203
Okamoto, Y. (2014) · The Journal of Physical Chemistry C · doi:10.1021/jp4063753 · Cited by 201
How Do Li Atoms Pass through the Al2O3 Coating Layer during Lithiation in Li-ion Batteries?
Jung, S. C., & Han, Y.-K. (2013) · The Journal of Physical Chemistry Letters · doi:10.1021/jz401231e · Cited by 199
Kim, J.-S., Kim, D. W., Jung, H. T., & Choi, J. W. (2015) · Chemistry of Materials · doi:10.1021/cm503447u · Cited by 199
Qiang, Z., Chen, Y.-M., Xia, Y., Liang, W., Zhu, Y., & Vogt, B. D. (2017) · Nano Energy · doi:10.1016/j.nanoen.2016.12.018 · Cited by 199
A room-temperature sodium metal anode enabled by a sodiophilic layer
Tang, S., Qiu, Z., Wang, X.-Y., Gu, Y., Zhang, X.-G., Wang, W.-W., Yan, J.-W., Zheng, M.-S., Dong, Q.-F., & Mao, B.-W. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.03.039 · Cited by 199
Lu, X., Li, G., Kim, J. Y., Mei, D., Lemmon, J. P., Sprenkle, V. L., & Liu, J. (2014) · Nature Communications · doi:10.1038/ncomms5578 · Cited by 197
Li, W., Kim, U.-H., Dolocan, A., Sun, Y.-K., & Manthiram, A. (2017) · ACS Nano · doi:10.1021/acsnano.7b01494 · Cited by 197
Impedance spectroscopy of lithium electrodes
Aurbach, D., & Zaban, A. (1993) · Journal of Electroanalytical Chemistry · doi:10.1016/0022-0728(93)80129-6 · Cited by 192
Electrochemistry of Selenium with Sodium and Lithium: Kinetics and Reaction Mechanism
Li, Q., Liu, H., Yao, Z., Cheng, J., Li, T., Li, Y., Wolverton, C., Wu, J., & Dravid, V. P. (2016) · ACS Nano · doi:10.1021/acsnano.6b04519 · Cited by 191
Soto, F. A., Marzouk, A., El-Mellouhi, F., & Balbuena, P. B. (2018) · Chemistry of Materials · doi:10.1021/acs.chemmater.8b00635 · Cited by 188
Memarzadeh Lotfabad, E., Kalisvaart, P., Cui, K., Kohandehghan, A., Kupsta, M., Olsen, B., & Mitlin, D. (2013) · Physical Chemistry Chemical Physics · doi:10.1039/c3cp52485j · Cited by 180
Self-citationYu, X., & Manthiram, A. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500350 · Cited by 172
Sverdrup, H. U. (2016) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2016.07.002 · Cited by 172
Sn–Bi–Sb alloys as anode materials for sodium ion batteries
Xie, H., Kalisvaart, W. P., Olsen, B. C., Luber, E. J., Mitlin, D., & Buriak, J. M. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta01443k · Cited by 172
Self-citationIn Situ Optical Imaging of Sodium Electrodeposition: Effects of Fluoroethylene Carbonate
Rodriguez, R., Loeffler, K. E., Nathan, S. S., Sheavly, J. K., Dolocan, A., Heller, A., & Mullins, C. B. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00500 · Cited by 169
Belharouak, I., Koenig, G. M., & Amine, K. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.08.079 · Cited by 168
Honeycomb-like porous 3D nickel electrodeposition for stable Li and Na metal anodes
Xu, Y., Menon, A. S., Harks, P. P. R. M. L., Hermes, D. C., Haverkate, L. A., Unnikrishnan, S., & Mulder, F. M. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2017.11.011 · Cited by 168
High-Performance All-Inorganic Solid-State Sodium–Sulfur Battery
Yue, J., Han, F., Fan, X., Zhu, X., Ma, Z., Yang, J. H., & Wang, C. (2017) · ACS Nano · doi:10.1021/acsnano.7b01445 · Cited by 167
Si nanotubes ALD coated with TiO2, TiN or Al2O3as high performance lithium ion battery anodes
Lotfabad, E. M., Kalisvaart, P., Kohandehghan, A., Cui, K., Kupsta, M., Farbod, B., & Mitlin, D. (2014) · J. Mater. Chem. A · doi:10.1039/c3ta14302c · Cited by 166
Self-citationGas Evolution in Operating Lithium-Ion Batteries Studied In Situ by Neutron Imaging
Michalak, B., Sommer, H., Mannes, D., Kaestner, A., Brezesinski, T., & Janek, J. (2015) · Scientific Reports · doi:10.1038/srep15627 · Cited by 161
Bauer, I., Kohl, M., Althues, H., & Kaskel, S. (2014) · Chemical Communications · doi:10.1039/c4cc00161c · Cited by 159
Zhao, N., Li, C., & Guo, X. (2014) · Physical Chemistry Chemical Physics · doi:10.1039/c4cp01961j · Cited by 158
Kumar, H., Detsi, E., Abraham, D. P., & Shenoy, V. B. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b03403 · Cited by 157
The Electrochemistry with Lithium versus Sodium of Selenium Confined To Slit Micropores in Carbon
Xin, S., Yu, L., You, Y., Cong, H., Yin, Y., Du, X.-L., Guo, Y., Yu, S., Cui, Y., & Goodenough, J. B. (2016) · Nano Letters · doi:10.1021/acs.nanolett.6b01819 · Cited by 156
Hong, Y.-S., Li, N., Chen, H., Wang, P., Song, W., & Fang, D. (2017) · Energy storage materials · doi:10.1016/j.ensm.2017.10.007 · Cited by 151
Lee, H., Lim, H.-S., Ren, X., Yu, L., Engelhard, M. H., Han, K. S., Lee, J., Kim, H.-T., Xiao, J., Liu, J., et al. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.8b01819 · Cited by 150
Morphological Transitions on Lithium Metal Anodes
López, C. M., Vaughey, J. T., & Dees, D. W. (2009) · Journal of The Electrochemical Society · doi:10.1149/1.3158548 · Cited by 150
Seong, I. W., Hong, C. H., Kim, B. K., & Yoon, W. Y. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.12.062 · Cited by 150
Nanoscale perspective: Materials designs and understandings in lithium metal anodes
Lin, D., Liu, Y., Pei, A., & Cui, Y. (2017) · Nano Research · doi:10.1007/s12274-017-1596-1 · Cited by 147
Sun, F., Zielke, L., Markötter, H., Hilger, A., Zhou, D., Moroni, R., Zengerle, R., Thiele, S., Banhart, J., & Manke, I. (2016) · ACS Nano · doi:10.1021/acsnano.6b03939 · Cited by 146
Defect chemistry and lithium transport in Li 3 OCl anti-perovskite superionic conductors
Lu, Z., Chen, C., Baiyee, Z. M., Chen, X., Niu, C., & Francesco Ciucci, A. (2015) · Physical Chemistry Chemical Physics · doi:10.1039/c5cp05722a · Cited by 144
Manganese in Graphite Anode and Capacity Fade in Li Ion Batteries
Shkrob, I. A., Kropf, A. J., Marin, T. W., Li, Y., Poluektov, O. G., Niklas, J., & Abraham, D. P. (2014) · The Journal of Physical Chemistry C · doi:10.1021/jp507833u · Cited by 142
Xu, G., Liu, J., Amine, R., Chen, Z., & Amine, K. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00642 · Cited by 142
Liu, W., Xia, Y., Wang, W., Wang, Y., Jin, J., Chen, Y., Paek, E., & Mitlin, D. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201802918 · Cited by 142
Self-citationHighly Reversible Room-Temperature Sulfur/Long-Chain Sodium Polysulfide Batteries
Yu, X., & Manthiram, A. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz500848x · Cited by 140
Zeng, L., Wei, X., Wang, J., Jiang, Y., Li, W., & Yu, Y. M. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.02.029 · Cited by 140
Revealing SEI Morphology: In-Depth Analysis of a Modeling Approach
Single, F., Horstmann, B., & Latz, A. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.0121711jes · Cited by 138
Schiele, A., Breitung, B., Hatsukade, T., Berkes, B. B., Hartmann, P., Janek, J., & Brezesinski, T. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00619 · Cited by 138
Guin, M., Tietz, F., & Guillon, O. (2016) · Solid State Ionics · doi:10.1016/j.ssi.2016.06.005 · Cited by 137
Wu, E. A., Kompella, C. S., Zhu, Z., Lee, J. Z., Lee, S. C., Chu, I., Nguyen, H., Ong, S. P., Banerjee, A., & Meng, Y. S. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b19037 · Cited by 136
Self-citationLi dendrite growth and Li+ ionic mass transfer phenomenon
Nishikawa, K., Mori, T., Nishida, T., Fukunaka, Y., & Rosso, M. (2011) · Journal of Electroanalytical Chemistry · doi:10.1016/j.jelechem.2011.06.035 · Cited by 134
High Capacity, Dendrite‐Free Growth, and Minimum Volume Change Na Metal Anode
Zhao, Y., Yang, X., Kuo, L., Kaghazchi, P., Sun, Q., Liang, J., Wang, B., Lushington, A., Li, R., Zhang, H., et al. (2018) · Small · doi:10.1002/smll.201703717 · Cited by 133
A Material Perspective of Rechargeable Metallic Lithium Anodes
Li, B., Wang, Y., & Yang, S. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702296 · Cited by 131
Graphite intercalation compounds as cathode materials
Armand, M. B., & Touzain, P. (1977) · Materials Science and Engineering · doi:10.1016/0025-5416(77)90052-0 · Cited by 130
In situ formed carbon bonded and encapsulated selenium composites for Li–Se and Na–Se batteries
Luo, C. W., Wang, J., Suo, L., Mao, J., Fan, X., & Wang, C. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta04611k · Cited by 127
New Na‐Ion Solid Electrolytes Na4−xSn1−xSbxS4 (0.02 ≤ x ≤ 0.33) for All‐Solid‐State Na‐Ion Batteries
Heo, J. W., Banerjee, A., Park, K. H., Jung, Y. S., & Hong, S. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702716 · Cited by 127
Li, X., Liang, J., Hou, Z., Zhang, W., Wang, Y., Zhu, Y., & Qian, Y. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201501956 · Cited by 126
Kohandehghan, A., Kalisvaart, P., Cui, K., Kupsta, M., Lotfabad, E. M., & Mitlin, D. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta12964k · Cited by 123
Self-citationStable lithium electrodeposition in salt-reinforced electrolytes
Lü, Y., Tu, Z., Shu, J. B., & Archer, L. A. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.01.030 · Cited by 122
Liu, X., Deng, X., Liu, R., Yan, H., Guo, Y., Wang, D., & Wan, L. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am505847s · Cited by 121
Composition of Surface Layers on Li Electrodes in PC, LiClO4 of Very Low Water Content
Nazri, G., & Muller, R. H. (1985) · Journal of The Electrochemical Society · doi:10.1149/1.2114288 · Cited by 118
An Electrolyte for Reversible Cycling of Sodium Metal and Intercalation Compounds
Schafzahl, L., Hanzu, I., Wilkening, M., & Freunberger, S. A. (2016) · ChemSusChem · doi:10.1002/cssc.201601222 · Cited by 114
Lu, Y., Zhang, Q., Han, M., & Chen, J. (2017) · Chemical Communications · doi:10.1039/c7cc07485a · Cited by 114
Insights into Electrochemical Sodium Metal Deposition as Probed with in Situ 23 Na NMR
Bayley, P. M., Trease, N. M., & Grey, C. P. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.5b12423 · Cited by 111
A new phenomenon in sodium batteries: Voltage step due to solvent interaction
Rudola, A., Aurbach, D., & Balaya, P. (2014) · Electrochemistry Communications · doi:10.1016/j.elecom.2014.06.008 · Cited by 99
Tao, R., Bi, X., Shu, L., Yao, Y., Wu, F., Wang, Q., Zhang, C., & Lu, J. B. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b13859 · Cited by 98
Yuan, B.-B., Sun, X., Zeng, L., Yu, Y. M., & Wang, Q. (2017) · Small · doi:10.1002/smll.201703252 · Cited by 98
An Advanced Na–FeCl 2 ZEBRA Battery for Stationary Energy Storage Application
Li, G., Lu, X., Kim, J. Y., et al. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500357 · Cited by 92
Luo, J. L., Lee, R., Jin, J.-T., Weng, Y., Fang, C., & Wu, N. (2016) · Chemical Communications · doi:10.1039/c6cc09248a · Cited by 92
Ushirogata, K., Sodeyama, K., Futera, Z., Tateyama, Y., & Okuno, Y. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0301514jes · Cited by 85
Development of novel inorganic electrolytes for room temperature rechargeable sodium metal batteries
Ruiz-Martínez, D., Kovacs, A., & Gómez, R. (2017) · Energy & Environmental Science · doi:10.1039/c7ee01735a · Cited by 84
Peng, Z., Wang, S., Zhou, J., Jin, Y., Liu, Y., Qin, Y., Shen, C., Han, W., & Wang, D. (2016) · Journal of Materials Chemistry A · doi:10.1039/c5ta10050j · Cited by 82
Song, J., Jeong, G., Lee, A., Park, J. H., Kim, H., & Kim, Y. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b08111 · Cited by 81
Wang, Y. E., Richards, W. D., Bo, S., Miara, L. J., & Ceder, G. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b02476 · Cited by 81
Self-extinguishing electrolytes using fluorinated alkyl phosphates for lithium batteries
Shiga, T., Kato, Y., Kondo, H., & Okuda, C. (2017) · Journal of Materials Chemistry A · doi:10.1039/c6ta09915g · Cited by 80
Xu, Q., Liu, T., Li, Y., Hu, L., Dai, C., Zhang, Y., Li, Y., Liu, D., & Xu, M. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b14380 · Cited by 79
Li, X., Zhao, L., Li, P. R., Zhang, Q., & Wang, M. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.10.050 · Cited by 73
Rechargeable Lithium and Sodium Anodes in Chloroaluminate Molten Salts Containing Thionyl Chloride
Fuller, J., Osteryoung, R. A., & Carlin, R. T. (1995) · Journal of The Electrochemical Society · doi:10.1149/1.2048390 · Cited by 69
In Situ Scanning Electron Microscopy Characterization of the Mechanism for Li Dendrite Growth
Tang, C.-Y., & Dillon, S. J. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.0891608jes · Cited by 67
Yan, J. W., Zhang, J., Su, Y., Zhang, X., & Xia, B. (2009) · Electrochimica Acta · doi:10.1016/j.electacta.2009.10.068 · Cited by 62
Origin of Outstanding Phase and Moisture Stability in a Na3P1–xAsxS4 Superionic Conductor
Shang, S., Yu, Z., Wang, Y., Wang, D., & Liu, Z. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b03606 · Cited by 58
Liu, W., Li, P., Wang, W., Zhu, D., Chen, Y., Pen, S., Paek, E., & Mitlin, D. (2018) · ACS Nano · doi:10.1021/acsnano.8b06051 · Cited by 56
Self-citationPiersma, B. J., Ryan, D. M., Schumacher, E. R., & Riechel, T. L. (1996) · Journal of The Electrochemical Society · doi:10.1149/1.1836557 · Cited by 55
Low-Cost, Dendrite-Blocking Polymer-Sb 2 O 3 Separators for Lithium and Sodium Batteries
Ansari, Y., Guo, B., Cho, J. H., Park, K., Song, J., Ellison, C. J., & Goodenough, J. B. (2014) · Journal of The Electrochemical Society · doi:10.1149/2.0631410jes · Cited by 54
Lithium surface protection by polyacetylene in situ polymerization
Belov, D. G., Yarmolenko, O. V., Peng, A., & Efimov, O. N. (2006) · Synthetic Metals · doi:10.1016/j.synthmet.2006.04.006 · Cited by 52
Manganese in the SEI Layer of Li4Ti5O12 Studied by Combined NEXAFS and HAXPES Techniques
Nordh, T., Younesi, R., Hahlin, M., et al. (2016) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.5b11756 · Cited by 51
Stability of Sodium Electrodeposited from a Room Temperature Chloroaluminate Molten Salt
Gray, G. E., Kohl, P. A., & Winnick, J. (1995) · Journal of The Electrochemical Society · doi:10.1149/1.2048391 · Cited by 41
Sakti, A., Azevedo, I. L., Fuchs, E. R. H., Michalek, J. J., Gallagher, K. G., & Whitacre, J. F. (2017) · Energy Policy · doi:10.1016/j.enpol.2017.03.063 · Cited by 34
Chen, S., Ishii, J., Horiuchi, S., Yoshizawa‐Fujita, M., & Izgorodina, E. I. (2017) · Physical Chemistry Chemical Physics · doi:10.1039/c7cp03009f · Cited by 34
Pre-planted nucleation seeds for rechargeable metallic lithium anodes
Liu, Y., Li, B., Liu, J., Li, S., & Yang, S. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta04932c · Cited by 31
Cited by
Liu, W., Liu, P., & Mitlin, D. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202002297 · Cited by 687
Self-citationDesign strategies for nonaqueous multivalent-ion and monovalent-ion battery anodes
Li, M., Lu, J., Ji, X., Li, Y., Shao, Y., Chen, Z., Zhong, C., & Amine, K. (2020) · Nature Reviews Materials · doi:10.1038/s41578-019-0166-4 · Cited by 438
MXene‐Based Dendrite‐Free Potassium Metal Batteries
Tang, X., Zhou, D., Li, P., Guo, X., Sun, B., Liu, H., Yan, K., Gogotsi, Y., & Wang, G. (2020) · Advanced Materials · doi:10.1002/adma.201906739 · Cited by 346
Electroless Formation of a Fluorinated Li/Na Hybrid Interphase for Robust Lithium Anodes
Wang, Y., Liu, F., Fan, G., Qiu, X., Liu, J., Yan, Z., Zhang, K., Cheng, F., & Chen, J. (2021) · Journal of the American Chemical Society · doi:10.1021/jacs.0c12051 · Cited by 283
Metadata
- Authors
- Lee, B., Paek, E., Mitlin, D., & Lee, S. W.
- Venue
- Chemical Reviews
- Publisher
- American Chemical Society (ACS)
- Published
- 2019-04-04
- Volume
- 119
- Issue
- 8
- Pages
- 5416-5460
- ISSN
- 0009-2665 (ISSN-L)
- 1520-6890
- OpenAlex
- W2928415750
- Cited by
- 940
- References
- 338
- FWCI
- 5.98
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.