The DOI matches its Crossref record; 338 of the 338 references it cites were found in a registry or an index.
Sodium Metal Anodes: Emerging Solutions to Dendrite Growth
Abstract
This comprehensive Review focuses on the key challenges and recent progress regarding sodium-metal anodes employed in sodium-metal batteries (SMBs). The metal anode is the essential component of emerging energy storage systems such as sodium sulfur and sodium selenium, which are discussed as example full-cell applications. We begin with a description of the differences in the chemical and physical properties of Na metal versus the oft-studied Li metal, and a corresponding discussion regarding the number of ways in which Na does not follow Li-inherited paradigms in its electrochemical behavior. We detail the major challenges for Na-metal systems that at this time limit the feasibility of SMBs. The core Na anode problems are the following interrelated degradation mechanisms: An unstable solid electrolyte interphase with most organic electrolytes, “mossy” and “lath-like” metal dendrite growth for liquid systems, poor Coulombic efficiency, and gas evolution. Even solid-state Na batteries are not immune, with metal dendrites being reported. The solutions may be subdivided into the following interrelated taxonomy: Improved electrolytes and electrolyte additives tailored for Na-metal anodes, interfacial engineering between the metal and the liquid or solid electrolyte, electrode architectures that both reduce the current density during plating–stripping and serve as effective hosts that shield the Na metal from excessive reactions, and alloy design to tune the bulk properties of the metal per se. For instance, stable plating–stripping of Na is extremely difficult with conventional carbonate solvents but has been reported with ethers and glymes. Solid-state electrolytes (SSEs) such as beta-alumina solid electrolyte (BASE), sodium superionic conductor (NASICON), and sodium thiophosphate (75Na 2 S·25P 2 S 5 ) present highly exciting opportunities for SMBs that avoid the dangers of flammable liquids. Even SSEs are not immune to dendrites, however, which grow through the defects in the bulk pellet, but may be controlled through interfacial energy modification. We conclude with a discussion of the key research areas that we feel are the most fruitful for further pursuit. In our opinion, greatly improved understanding and control of the SEI structure is the key to cycling stability. A holistic approach involving complementary post-mortem, in situ, and operando analyses to elucidate full battery cell level structure–performance relations is advocated.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Issues and challenges facing rechargeable lithium batteries
Tarascon, J.-M., & Armand, M. (2001) · Nature · doi:10.1038/35104644 · Cited by 21,130
Armand, M., & Tarascon, J.-M. (2008) · Nature · doi:10.1038/451652a · Cited by 19,612
Electrical energy storage for the grid: A battery of choices
Dunn, B., Kamath, H., & Tarascon, J.-M. (2011) · Science · doi:10.1126/science.1212741 · Cited by 15,072
Challenges for Rechargeable Li Batteries
Goodenough, J. B., & Kim, Y. (2010) · Chemistry of Materials · doi:10.1021/cm901452z · Cited by 10,943
Towards greener and more sustainable batteries for electrical energy storage
Larcher, D., & Tarascon, J.-M. (2015) · Nature Chemistry · doi:10.1038/nchem.2085 · Cited by 7,872
Li-ion battery materials: present and future
Nitta, N., Wu, F., Lee, J. T., & Yushin, G. (2015) · Materials Today · doi:10.1016/j.mattod.2014.10.040 · Cited by 7,389
Reviving the lithium metal anode for high-energy batteries
Lin, D., Liu, Y., & Cui, Y. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2017.16 · Cited by 6,763
Challenges in the development of advanced Li-ion batteries: a review
Etacheri, V., Marom, R., Elazari, R., Salitra, G., & Aurbach, D. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01598b · Cited by 6,726
Research Development on Sodium-Ion Batteries
Yabuuchi, N., Kubota, K., Dahbi, M., & Komaba, S. (2014) · Chemical Reviews · doi:10.1021/cr500192f · Cited by 6,478
Lithium Batteries and Cathode Materials
Whittingham, M. S. (2004) · Chemical Reviews · doi:10.1021/cr020731c · Cited by 6,267
Toward Safe Lithium Metal Anode in Rechargeable Batteries: A Review
Cheng, X.-B., Zhang, R., Zhao, C.-Z., & Zhang, Q. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00115 · Cited by 6,197
Applications of ionic liquids in the chemical industry
Plechkova, N. V., & Seddon, K. R. (2008) · Chem. Soc. Rev. · doi:10.1039/b006677j · Cited by 5,686
Sodium-ion batteries: present and future
Hwang, J.-Y., Myung, S.-T., & Sun, Y.-K. (2017) · Chemical Society Reviews · doi:10.1039/c6cs00776g · Cited by 5,305
Lithium metal anodes for rechargeable batteries
Xu, W., Wang, J., Ding, F., Chen, X., Nasybulin, E., Zhang, Y., & Zhang, J.-G. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee40795k · Cited by 4,704
Lithium battery chemistries enabled by solid-state electrolytes
Manthiram, A., Yu, X., & Wang, S. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.103 · Cited by 4,689
Rechargeable Lithium–Sulfur Batteries
Manthiram, A., Fu, Y., Chung, S.-H., Zu, C., & Su, Y.-S. (2014) · Chemical Reviews · doi:10.1021/cr500062v · Cited by 4,665
Ionic-liquid materials for the electrochemical challenges of the future
Armand, M., Endres, F., MacFarlane, D. R., Ohno, H., & Scrosati, B. (2009) · Nature Materials · doi:10.1038/nmat2448 · Cited by 4,619
Slater, M. D., Kim, D., Lee, E., & Johnson, C. S. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201200691 · Cited by 4,518
LixCoO2 (0<x<-1): A new cathode material for batteries of high energy density
Mizushima, K., Jones, P. C., Wiseman, P. J., & Goodenough, J. B. (1980) · Materials Research Bulletin · doi:10.1016/0025-5408(80)90012-4 · Cited by 3,856
Na-ion batteries, recent advances and present challenges to become low cost energy storage systems
Palomares, V., Serras, P., Villaluenga, I., Hueso, K. B., Carretero-González, J., & Rojo, T. (2012) · Energy & Environmental Science · doi:10.1039/c2ee02781j · Cited by 3,564
Kim, S., Seo, D., Ma, X., Ceder, G., & Kang, K. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201200026 · Cited by 3,370
Room-temperature stationary sodium-ion batteries for large-scale electric energy storage
Pan, H., Hu, Y.-S., & Chen, L. (2013) · Energy & Environmental Science · doi:10.1039/c3ee40847g · Cited by 3,319
Thermal runaway caused fire and explosion of lithium ion battery
Wang, Q., Ping, P., Zhao, X., Chu, G., Sun, J., & Chen, C. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.02.038 · Cited by 3,103
Peled, E. (1979) · Journal of The Electrochemical Society · doi:10.1149/1.2128859 · Cited by 2,899
The role of graphene for electrochemical energy storage
Raccichini, R., Varzi, A., Passerini, S., & Scrosati, B. (2015) · Nature Materials · doi:10.1038/nmat4170 · Cited by 2,687
Designing high-energy lithium–sulfur batteries
Seh, Z. W., Sun, Y., Zhang, Q., & Cui, Y. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00410a · Cited by 2,573
High rate and stable cycling of lithium metal anode
Qian, J., Henderson, W. A., Xu, W., Bhattacharya, P., Engelhard, M., Borodin, O., & Zhang, J.-G. (2015) · Nature Communications · doi:10.1038/ncomms7362 · Cited by 2,561
Bachman, J. C., Muy, S., Grimaud, A., Chang, H.-H., Pour, N., Lux, S. F., Paschos, O., Maglia, F., Lupart, S., Lamp, P., et al. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00563 · Cited by 2,537
Thackeray, M. M., Wolverton, C., & Isaacs, E. D. (2012) · Energy & Environmental Science · doi:10.1039/c2ee21892e · Cited by 2,515
A new class of Solvent-in-Salt electrolyte for high-energy rechargeable metallic lithium batteries
Suo, L., Hu, Y.-S., Li, H., Armand, M., & Chen, L. (2013) · Nature Communications · doi:10.1038/ncomms2513 · Cited by 2,314
Fast Na+-ion transport in skeleton structures
Goodenough, J. B., Hong, H. Y.-P., & Kafalas, J. A. (1976) · Materials Research Bulletin · doi:10.1016/0025-5408(76)90077-5 · Cited by 2,284
P2-type Nax[Fe1/2Mn1/2]O2 made from earth-abundant elements for rechargeable Na batteries
Yabuuchi, N., Kajiyama, M., Iwatate, J., Nishikawa, H., Hitomi, S., Okuyama, R., Usui, R., Yamada, Y., & Komaba, S. (2012) · Nature Materials · doi:10.1038/nmat3309 · Cited by 2,270
Review—SEI: Past, Present and Future
Peled, E., & Menkin, S. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.1441707jes · Cited by 2,182
Aurbach, D. (2000) · Journal of Power Sources · doi:10.1016/s0378-7753(00)00431-6 · Cited by 2,130
An, S. J., Li, J., Daniel, C., Mohanty, D., Nagpure, S., & Wood, D. L. (2016) · Carbon · doi:10.1016/j.carbon.2016.04.008 · Cited by 2,121
Dendrite-Free Lithium Deposition via Self-Healing Electrostatic Shield Mechanism
Ding, F., Xu, W., Graff, G. L., Zhang, J., Sushko, M. L., Chen, X., Shao, Y., Engelhard, M. H., Nie, Z., Xiao, J., et al. (2013) · Journal of the American Chemical Society · doi:10.1021/ja312241y · Cited by 2,107
The Emerging Chemistry of Sodium Ion Batteries for Electrochemical Energy Storage
Kundu, D., Talaie, E., Duffort, V., & Nazar, L. F. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201410376 · Cited by 2,068
Nanostructured sulfur cathodes
Yang, Y., Zheng, G., & Cui, Y. (2013) · Chemical Society Reviews · doi:10.1039/c2cs35256g · Cited by 1,947
Electrical Energy Storage and Intercalation Chemistry
Whittingham, M. S. (1976) · Science · doi:10.1126/science.192.4244.1126 · Cited by 1,919
Expanded graphite as superior anode for sodium-ion batteries
Wen, Y., He, K., Zhu, Y., Han, F., Xu, Y., Matsuda, I., Ishii, Y., Cumings, J., & Wang, C. (2014) · Nature Communications · doi:10.1038/ncomms5033 · Cited by 1,894
High Capacity Anode Materials for Rechargeable Sodium-Ion Batteries
Stevens, D. A., & Dahn, J. R. (2000) · Journal of The Electrochemical Society · doi:10.1149/1.1393348 · Cited by 1,884
Lin, D., Liu, Y., Liang, Z., Lee, H.-W., Sun, J., Wang, H., Yan, K., Xie, J., & Cui, Y. (2016) · Nature Nanotechnology · doi:10.1038/nnano.2016.32 · Cited by 1,798
A Review of Solid Electrolyte Interphases on Lithium Metal Anode
Cheng, X., Zhang, R., Zhao, C., Wei, F., Zhang, J., & Zhang, Q. (2016) · Advanced Science · doi:10.1002/advs.201500213 · Cited by 1,786
Design principles for electrolytes and interfaces for stable lithium-metal batteries
Tikekar, M. D., Choudhury, S., Tu, Z., & Archer, L. A. (2016) · Nature Energy · doi:10.1038/nenergy.2016.114 · Cited by 1,765
Energy applications of ionic liquids
MacFarlane, D. R., Tachikawa, N., Forsyth, M., Pringle, J. M., Howlett, P. C., Elliott, G. D., Davis, J. H., Watanabe, M., Simon, P., & Angell, C. A. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee42099j · Cited by 1,745
The Impact of Elastic Deformation on Deposition Kinetics at Lithium/Polymer Interfaces
Monroe, C., & Newman, J. (2005) · Journal of The Electrochemical Society · doi:10.1149/1.1850854 · Cited by 1,701
Fluoroethylene Carbonate Additives to Render Uniform Li Deposits in Lithium Metal Batteries
Zhang, X., Cheng, X., Chen, X., Yan, C., & Zhang, Q. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201605989 · Cited by 1,699
Recent advances in all-solid-state rechargeable lithium batteries
Sun, C., Liu, J., Gong, Y., Wilkinson, D. P., & Zhang, J. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.01.028 · Cited by 1,688
Review on modeling of the anode solid electrolyte interphase (SEI) for lithium-ion batteries
Wang, A., Kadam, S., Li, H., Shi, S., & Qi, Y. (2018) · npj Computational Materials · doi:10.1038/s41524-018-0064-0 · Cited by 1,639
Electrolytes for solid-state lithium rechargeable batteries: recent advances and perspectives
Quartarone, E., & Mustarelli, P. (2011) · Chemical Society Reviews · doi:10.1039/c0cs00081g · Cited by 1,607
Stable lithium electrodeposition in liquid and nanoporous solid electrolytes
Lu, Y., Tu, Z., & Archer, L. A. (2014) · Nature Materials · doi:10.1038/nmat4041 · Cited by 1,592
Transition of lithium growth mechanisms in liquid electrolytes
Bai, P., Li, J., Brushett, F. R., & Bazant, M. Z. (2016) · Energy & Environmental Science · doi:10.1039/c6ee01674j · Cited by 1,591
Yang, C.-P., Yin, Y.-X., Zhang, S.-F., Li, N.-W., & Guo, Y.-G. (2015) · Nature Communications · doi:10.1038/ncomms9058 · Cited by 1,589
An Artificial Solid Electrolyte Interphase Layer for Stable Lithium Metal Anodes
Li, N., Yin, Y., Yang, C., & Guo, Y. (2016) · Advanced Materials · doi:10.1002/adma.201504526 · Cited by 1,577
Recent developments in cathode materials for lithium ion batteries
Fergus, J. W. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.08.089 · Cited by 1,561
Lei, Z., Chen, B., Koo, Y.-M., & MacFarlane, D. R. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00246 · Cited by 1,460
Electrochemical aspects of the generation of ramified metallic electrodeposits
Chazalviel, J.-N. (1990) · Physical Review A · doi:10.1103/physreva.42.7355 · Cited by 1,402
Ionic Liquids at Electrified Interfaces
Fedorov, M. V., & Kornyshev, A. A. (2014) · Chemical Reviews · doi:10.1021/cr400374x · Cited by 1,398
Mg rechargeable batteries: an on-going challenge
Yoo, H. D., Shterenberg, I., Gofer, Y., Gershinsky, G., Pour, N., & Aurbach, D. (2013) · Energy & Environmental Science · doi:10.1039/c3ee40871j · Cited by 1,398
A comprehensive review of sodium layered oxides: powerful cathodes for Na-ion batteries
Han, M. H., Gonzalo, E., Singh, G., & Rojo, T. (2015) · Energy & Environmental Science · doi:10.1039/c4ee03192j · Cited by 1,380
Electrolyte additive enabled fast charging and stable cycling lithium metal batteries
Zheng, J., Engelhard, M. H., Mei, D., Jiao, S., Polzin, B. J., Zhang, J.-G., & Xu, W. (2017) · Nature Energy · doi:10.1038/nenergy.2017.12 · Cited by 1,343
New Approaches for High Energy Density Lithium–Sulfur Battery Cathodes
Evers, S., & Nazar, L. F. (2013) · Accounts of Chemical Research · doi:10.1021/ar3001348 · Cited by 1,324
New horizons for inorganic solid state ion conductors
Zhang, Z., Shao, Y., Lotsch, B., Hu, Y.-S., Li, H., Janek, J., Nazar, L. F., Nan, C.-W., Maier, J., Armand, M., et al. (2018) · Energy & Environmental Science · doi:10.1039/c8ee01053f · Cited by 1,321
The Birth of the Lithium‐Ion Battery
Yoshino, A. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201105006 · Cited by 1,229
Hou, H., Banks, C. E., Jing, M., Zhang, Y., & Ji, X. (2015) · Advanced Materials · doi:10.1002/adma.201503816 · Cited by 1,214
Advanced Model for Solid Electrolyte Interphase Electrodes in Liquid and Polymer Electrolytes
Peled, E., Golodnitsky, D., & Ardel, G. (1997) · Journal of The Electrochemical Society · doi:10.1149/1.1837858 · Cited by 1,205
Recent Progress of the Solid‐State Electrolytes for High‐Energy Metal‐Based Batteries
Fan, L., Wei, S., Li, S., Li, Q., & Lu, Y. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702657 · Cited by 1,179
Tarascon, J.-M. (2010) · Nature Chemistry · doi:10.1038/nchem.680 · Cited by 1,157
Agrawal, R. C., & Pandey, G. P. (2008) · Journal of Physics D: Applied Physics · doi:10.1088/0022-3727/41/22/223001 · Cited by 1,075
Lithium ion secondary batteries; past 10 years and the future
Nishi, Y. (2001) · Journal of Power Sources · doi:10.1016/s0378-7753(01)00887-4 · Cited by 1,074
Superionic glass-ceramic electrolytes for room-temperature rechargeable sodium batteries
Hayashi, A., Noi, K., Sakuda, A., & Tatsumisago, M. (2012) · Nature Communications · doi:10.1038/ncomms1843 · Cited by 1,060
Sulfide Solid Electrolyte with Favorable Mechanical Property for All-Solid-State Lithium Battery
Sakuda, A., Hayashi, A., & Tatsumisago, M. (2013) · Scientific Reports · doi:10.1038/srep02261 · Cited by 1,051
Electrode–Electrolyte Interface in Li-Ion Batteries: Current Understanding and New Insights
Gauthier, M., Carney, T. J., Grimaud, A., Giordano, L., Pour, N., Chang, H.-H., Fenning, D. P., Lux, S. F., Paschos, O., Bauer, C., et al. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b01727 · Cited by 1,028
Metallic anodes for next generation secondary batteries
Kim, H., Jeong, G., Kim, Y.-U., Kim, J.-H., Park, C.-M., & Sohn, H.-J. (2013) · Chemical Society Reviews · doi:10.1039/c3cs60177c · Cited by 1,010
On the stability of surfaces of stressed solids
Srolovitz, D. J. (1989) · Acta Metallurgica · doi:10.1016/0001-6160(89)90246-0 · Cited by 1,010
Dead lithium: mass transport effects on voltage, capacity, and failure of lithium metal anodes
Chen, K.-H., Wood, K. N., Kazyak, E., LePage, W. S., Davis, A. L., Sanchez, A. J., & Dasgupta, N. P. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta00371d · Cited by 1,007
Zhan, C., Wu, T., Lu, J. B., & Amine, K. (2017) · Energy & Environmental Science · doi:10.1039/c7ee03122j · Cited by 1,006
Ionic Conductivity Enhancement of Polymer Electrolytes with Ceramic Nanowire Fillers
Liu, W., Liu, N., Sun, J., Hsu, P.-C., Li, Y., Lee, H.-W., & Cui, Y. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b00600 · Cited by 1,001
Cheng, X., Hou, T., Zhang, R., Peng, H., Zhao, C., Huang, J., & Zhang, Q. (2016) · Advanced Materials · doi:10.1002/adma.201506124 · Cited by 994
Update on Na-based battery materials. A growing research path
Palomares, V., Casas-Cabanas, M., Castillo-Martínez, E., Han, M. H., & Rojo, T. (2013) · Energy & Environmental Science · doi:10.1039/c3ee41031e · Cited by 992
On the use of vinylene carbonate (VC) as an additive to electrolyte solutions for Li-ion batteries
Aurbach, D., Gamolsky, K., Markovsky, B., Gofer, Y., Schmidt, M., & Heider, U. (2002) · Electrochimica Acta · doi:10.1016/s0013-4686(01)00858-1 · Cited by 992
Liu, Y., Lin, D., Yuen, P. Y., Liu, K., Xie, J., Dauskardt, R. H., & Cui, Y. (2017) · Advanced Materials · doi:10.1002/adma.201605531 · Cited by 990
Origin of fast ion diffusion in super-ionic conductors
He, X., Zhu, Y., & Mo, Y. (2017) · Nature Communications · doi:10.1038/ncomms15893 · Cited by 989
Rational material design for ultrafast rechargeable lithium-ion batteries
Tang, Y., Zhang, Y., Li, W., Ma, B., & Chen, X. (2015) · Chemical Society Reviews · doi:10.1039/c4cs00442f · Cited by 987
Carbon Nanosheet Frameworks Derived from Peat Moss as High Performance Sodium Ion Battery Anodes
Ding, J., Wang, H., Li, Z., Kohandehghan, A., Cui, K., Xu, Z., Zahiri, B., Tan, X., Lotfabad, E. M., Olsen, B. C., et al. (2013) · ACS Nano · doi:10.1021/nn404640c · Cited by 979
Self-citationA Highly Reversible Room-Temperature Sodium Metal Anode
Seh, Z. W., Sun, J., Sun, Y., & Cui, Y. (2015) · ACS Central Science · doi:10.1021/acscentsci.5b00328 · Cited by 979
In search of an optimized electrolyte for Na-ion batteries
Ponrouch, A., Marchante, E., Courty, M., Tarascon, J.-M., & Palacín, M. R. (2012) · Energy & Environmental Science · doi:10.1039/c2ee22258b · Cited by 968
Dendritic growth mechanisms in lithium/polymer cells
Brissot, C., Rosso, M., Chazalviel, J.-N., & Lascaud, S. (1999) · Journal of Power Sources · doi:10.1016/s0378-7753(98)00242-0 · Cited by 945
High-Density Sodium and Lithium Ion Battery Anodes from Banana Peels
Lotfabad, E. M., Ding, J., Cui, K., Kohandehghan, A., Kalisvaart, W. P., Hazelton, M., & Mitlin, D. (2014) · ACS Nano · doi:10.1021/nn502045y · Cited by 907
Self-citationElectrolyte additives for lithium ion battery electrodes: progress and perspectives
Haregewoin, A. M., Wotango, A. S., & Hwang, B.-J. (2016) · Energy Environ. Sci. · doi:10.1039/c6ee00123h · Cited by 907
Lithium-coated polymeric matrix as a minimum volume-change and dendrite-free lithium metal anode
Liu, Y., Lin, D., Liang, Z., Zhao, J., Yan, K., & Cui, Y. (2016) · Nature Communications · doi:10.1038/ncomms10992 · Cited by 902
Wood, K. N., Kazyak, E., Chadwick, A. F., Chen, K.-H., Zhang, J.-G., Thornton, K., & Dasgupta, N. P. (2016) · ACS Central Science · doi:10.1021/acscentsci.6b00260 · Cited by 900
Lithium Lanthanum Titanates: A Review
Stramare, S., Thangadurai, V., & Weppner, W. (2003) · Chemistry of Materials · doi:10.1021/cm0300516 · Cited by 898
Khurana, R., Schaefer, J. L., Archer, L. A., & Coates, G. W. (2014) · Journal of the American Chemical Society · doi:10.1021/ja502133j · Cited by 880
Chemical Dealloying Derived 3D Porous Current Collector for Li Metal Anodes
Yun, Q., He, Y., Lv, W., Zhao, Y., Li, B., Kang, F., & Yang, Q. (2016) · Advanced Materials · doi:10.1002/adma.201601409 · Cited by 870
Detection of subsurface structures underneath dendrites formed on cycled lithium metal electrodes
Harry, K. J., Hallinan, D. T., Parkinson, D. Y., MacDowell, A. A., & Balsara, N. P. (2014) · Nature Materials · doi:10.1038/nmat3793 · Cited by 868
Grosjean, C., Miranda, P. H., Perrin, M., & Poggi, P. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2011.11.023 · Cited by 847
Xu, Y., Zhu, Y., Liu, Y., & Wang, C. (2013) · Advanced Energy Materials · doi:10.1002/aenm.201200346 · Cited by 847
Liang, Z., Lin, D., Zhao, J., Lu, Z., Liu, Y., Liu, C., Lu, Y., Wang, H., Yan, K., Tao, X., et al. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1518188113 · Cited by 846
Prestoring Lithium into Stable 3D Nickel Foam Host as Dendrite‐Free Lithium Metal Anode
Chi, S., Liu, Y., Song, W., Fan, L., & Zhang, Q. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201700348 · Cited by 846
Selective Ionic Transport through Tunable Subnanometer Pores in Single-Layer Graphene Membranes
O’Hern, S. C., Boutilier, M. S. H., Idrobo, J.-C., Song, Y., Kong, J., Laoui, T., Atieh, M., & Karnik, R. (2014) · Nano Letters · doi:10.1021/nl404118f · Cited by 820
Next-Generation Lithium Metal Anode Engineering via Atomic Layer Deposition
Kozen, A. C., Lin, C.-F., Pearse, A. J., Schroeder, M. A., Han, X., Hu, L., Lee, S.-B., Rubloff, G. W., & Noked, M. (2015) · ACS Nano · doi:10.1021/acsnano.5b02166 · Cited by 816
Self-citationVesborg, P. C. K., & Jaramillo, T. F. (2012) · RSC Advances · doi:10.1039/c2ra20839c · Cited by 797
Chen, R., Qu, W., Guo, X., Li, L., & Wu, F. (2016) · Materials Horizons · doi:10.1039/c6mh00218h · Cited by 797
A rechargeable room-temperature sodium superoxide (NaO2) battery
Hartmann, P., Bender, C. L., Vračar, M., Dürr, A. K., Garsuch, A., Janek, J., & Adelhelm, P. (2013) · Nature Materials · doi:10.1038/nmat3486 · Cited by 786
A review of Battery Electric Vehicle technology and readiness levels
Mahmoudzadeh Andwari, A., Pesiridis, A., Rajoo, S., Martinez-Botas, R., & Esfahanian, V. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.03.138 · Cited by 784
Pang, Q., Tang, J., Huang, H., Liang, X., Hart, C., Tam, K. C., & Nazar, L. F. (2015) · Advanced Materials · doi:10.1002/adma.201502467 · Cited by 780
Electrochemical in situ investigations of SEI and dendrite formation on the lithium metal anode
Bieker, G., Winter, M., & Bieker, P. (2015) · Physical Chemistry Chemical Physics · doi:10.1039/c4cp05865h · Cited by 777
Review—Practical Issues and Future Perspective for Na-Ion Batteries
Kubota, K., & Komaba, S. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0151514jes · Cited by 775
High temperature sodium batteries: status, challenges and future trends
Hueso, K. B., Armand, M., & Rojo, T. (2013) · Energy & Environmental Science · doi:10.1039/c3ee24086j · Cited by 774
Zhang, H., Eshetu, G. G., Judez, X., Li, C., Rodriguez‐Martínez, L. M., & Armand, M. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201712702 · Cited by 774
Nanocellulose: a promising nanomaterial for advanced electrochemical energy storage
Chen, W., Yu, H., Lee, S.-Y., Wei, T., Li, J., & Fan, Z. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00790f · Cited by 766
Self-citationYan, K., Lee, H.-W., Gao, T., Zheng, G., Yao, H., Wang, H., Lu, Z., Zhou, Y., Liang, Z., Liu, Z., et al. (2014) · Nano Letters · doi:10.1021/nl503125u · Cited by 742
Failure Mechanism for Fast‐Charged Lithium Metal Batteries with Liquid Electrolytes
Lu, D., Shao, Y., Lozano, T., Bennett, W. D., Graff, G. L., Polzin, B., Zhang, J., Engelhard, M. H., Saenz, N. T., Henderson, W. A., et al. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201400993 · Cited by 740
Zhao, C., Liu, L., Qi, X., Lu, Y., Wu, F., Zhao, J., Yu, Y., Hu, Y., & Chen, L. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201703012 · Cited by 738
Fluorinated Ethylene Carbonate as Electrolyte Additive for Rechargeable Na Batteries
Komaba, S., Ishikawa, T., Yabuuchi, N., Murata, W., Ito, A., & Ohsawa, Y. (2011) · ACS Applied Materials & Interfaces · doi:10.1021/am200973k · Cited by 713
Direct Calculation of Li-Ion Transport in the Solid Electrolyte Interphase
Shi, S., Lu, P., Liu, Z., Qi, Y., Hector, L. G., Li, H., & Harris, S. J. (2012) · Journal of the American Chemical Society · doi:10.1021/ja305366r · Cited by 712
Ong, S. P., Mo, Y., Richards, W. D., Miara, L., Lee, H. S., & Ceder, G. (2013) · Energy Environ. Sci. · doi:10.1039/c2ee23355j · Cited by 710
The role of nanotechnology in the development of battery materials for electric vehicles
Lu, J., Chen, Z., Ma, Z., Pan, F., Curtiss, L. A., & Amine, K. (2016) · Nature Nanotechnology · doi:10.1038/nnano.2016.207 · Cited by 700
Zhang, R., Cheng, X., Zhao, C., Peng, H., Shi, J., Huang, J., Wang, J., Wei, F., & Zhang, Q. (2016) · Advanced Materials · doi:10.1002/adma.201504117 · Cited by 686
Electrolyte design strategies and research progress for room-temperature sodium-ion batteries
Che, H., Chen, S., Xie, Y., Wang, H., Amine, K., Liao, X.-Z., & Ma, Z.-F. (2017) · Energy & Environmental Science · doi:10.1039/c7ee00524e · Cited by 676
Ionic liquids and their solid-state analogues as materials for energy generation and storage
MacFarlane, D. R., Forsyth, M., Howlett, P. C., Kar, M., Passerini, S., Pringle, J. M., Ohno, H., Watanabe, M., Yan, F., Zheng, W., et al. (2016) · Nature Reviews Materials · doi:10.1038/natrevmats.2015.5 · Cited by 666
Are Ionic Liquids Chemically Stable?
Wang, B., Qin, L., Mu, T., Xue, Z., & Gao, G. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00594 · Cited by 665
Sakuda, A., Hayashi, A., & Tatsumisago, M. (2010) · Chemistry of Materials · doi:10.1021/cm901819c · Cited by 651
A high performance sulfur-doped disordered carbon anode for sodium ion batteries
Li, W., Zhou, M., Li, H., Wang, K., Cheng, S., & Jiang, K. (2015) · Energy & Environmental Science · doi:10.1039/c5ee01985k · Cited by 641
A High‐Energy Room‐Temperature Sodium‐Sulfur Battery
Xin, S., Yin, Y., Guo, Y., & Wan, L. (2014) · Advanced Materials · doi:10.1002/adma.201304126 · Cited by 632
Pieczonka, N. P. W., Liu, Z., Lu, P., Olson, K. L., Moote, J., Powell, B. R., & Kim, J. (2013) · The Journal of Physical Chemistry C · doi:10.1021/jp405158m · Cited by 629
Abouimrane, A., Dambournet, D., Chapman, K. W., Chupas, P. J., Weng, W., & Amine, K. (2012) · Journal of the American Chemical Society · doi:10.1021/ja211766q · Cited by 628
Superionic Conductivity in Lithium-Rich Anti-Perovskites
Zhao, Y., & Daemen, L. L. (2012) · Journal of the American Chemical Society · doi:10.1021/ja305709z · Cited by 626
Haruyama, J., Sodeyama, K., Han, L., Takada, K., & Tateyama, Y. (2014) · Chemistry of Materials · doi:10.1021/cm5016959 · Cited by 605
Xiao, L., Cao, Y., Xiao, J., Wang, W., Kovarik, L., Nie, Z., & Liu, J. (2012) · Chemical Communications · doi:10.1039/c2cc17129e · Cited by 601
Ionic liquids and derived materials for lithium and sodium batteries
Yang, Q., Zhang, Z., Sun, X.-G., Hu, Y.-S., Xing, H., & Dai, S. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00464h · Cited by 601
Advanced materials for sodium-beta alumina batteries: Status, challenges and perspectives
Lu, X., Xia, G., Lemmon, J. P., & Yang, Z. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.11.120 · Cited by 600
The Crystal Structure of NaM2IV(PO4)3; MeIV = Ge, Ti, Zr.
Hagman, L., Kierkegaard, P., Karvonen, P., Virtanen, A. I., & Paasiv́irta, J. (1968) · Acta chemica Scandinavica/Acta chemica Scandinavica. B, Organic chemistry and biochemistry/Acta chemica Scandinavica. A, Physical and inorganic chemistry/Acta chemica Scandinavica. Series B. Organic chemistry and biochemistry/Acta chemica Scandinavica. Series A, Physical and inorganic chemistry · doi:10.3891/acta.chem.scand.22-1822 · Cited by 595
Dendrite short-circuit and fuse effect on Li/polymer/Li cells
Rosso, M., Brissot, C., Teyssot, A., Dollé, M., Sannier, L., Tarascon, J.-M., Bouchet, R., & Lascaud, S. (2006) · Electrochimica Acta · doi:10.1016/j.electacta.2006.02.004 · Cited by 589
A stable room-temperature sodium–sulfur battery
Wei, S., Xu, S., Agrawral, A., Choudhury, S., Lu, Y., Tu, Z., Ma, L., & Archer, L. A. (2016) · Nature Communications · doi:10.1038/ncomms11722 · Cited by 589
Extremely Stable Sodium Metal Batteries Enabled by Localized High-Concentration Electrolytes
Zheng, J., Chen, S., Zhao, W., Song, J., Engelhard, M. H., & Zhang, J.-G. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.7b01213 · Cited by 579
Zhao, L., Zhao, J., Hu, Y., Li, H., Zhou, Z., Armand, M., & Chen, L. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201200166 · Cited by 568
A room-temperature sodium–sulfur battery with high capacity and stable cycling performance
Xu, X., Zhou, D., Qin, X., Lin, K., Kang, F., Li, B., Shanmukaraj, D., Rojo, T., Armand, M., & Wang, G. (2018) · Nature Communications · doi:10.1038/s41467-018-06443-3 · Cited by 563
Lithium Metal Anodes with an Adaptive “Solid-Liquid” Interfacial Protective Layer
Liu, K., Pei, A., Lee, H. R., Kong, B., Liu, N., Lin, D., Liu, Y., Liu, C., Hsu, P.-C., Bao, Z., et al. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.6b13314 · Cited by 560
Wood, K. N., Noked, M., & Dasgupta, N. P. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00650 · Cited by 558
Zhan, C., Lu, J., Jeremy Kropf, A., Wu, T., Jansen, A. N., Sun, Y.-K., Qiu, X., & Amine, K. (2013) · Nature Communications · doi:10.1038/ncomms3437 · Cited by 538
Self-heating–induced healing of lithium dendrites
Li, L., Basu, S., Wang, Y., Chen, Z., Hundekar, P., Wang, B., Shi, J., Shi, Y., Narayanan, S., & Koratkar, N. (2018) · Science · doi:10.1126/science.aap8787 · Cited by 528
Implantable Solid Electrolyte Interphase in Lithium-Metal Batteries
Cheng, X.-B., Yan, C., Chen, X., Guan, C., Huang, J.-Q., Peng, H.-J., Zhang, R., Yang, S.-T., & Zhang, Q. (2017) · Chem · doi:10.1016/j.chempr.2017.01.003 · Cited by 524
Towards high energy density sodium ion batteries through electrolyte optimization
Ponrouch, A., Dedryvère, R., Monti, D., Demet, A. E., Ateba Mba, J. M., Croguennec, L., Masquelier, C., Johansson, P., & Palacín, M. R. (2013) · Energy & Environmental Science · doi:10.1039/c3ee41379a · Cited by 520
Study of the Failure Mechanisms of LiNi0.8Mn0.1Co0.1O2Cathode Material for Lithium Ion Batteries
Li, J., Downie, L. E., Ma, L., Qiu, W., & Dahn, J. R. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.1011507jes · Cited by 516
Energy applications of ionic liquids
Wishart, J. F. (2009) · Energy & Environmental Science · doi:10.1039/b906273d · Cited by 502
Kushima, A., So, K. P., Su, C., Bai, P., Kuriyama, N., Maebashi, T., Fujiwara, Y., Bazant, M. Z., & Li, J. (2017) · Nano Energy · doi:10.1016/j.nanoen.2016.12.001 · Cited by 492
From lithium to sodium: Cell chemistry of room temperature sodium–air and sodium–sulfur batteries
Adelhelm, P., Hartmann, P., Bender, C. L., Busche, M., Eufinger, C., & Janek, J. (2015) · Beilstein Journal of Nanotechnology · doi:10.3762/bjnano.6.105 · Cited by 478
First-principles study of alkali metal-graphite intercalation compounds
Nobuhara, K., Nakayama, H., Nose, M., Nakanishi, S., & Iba, H. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.06.057 · Cited by 476
Stabilizing lithium metal using ionic liquids for long-lived batteries
Basile, A., Bhatt, A. I., & O’Mullane, A. P. (2016) · Nature Communications · doi:10.1038/ncomms11794 · Cited by 467
Solubility of the Solid Electrolyte Interphase (SEI) in Sodium Ion Batteries
Mogensen, R., Brandell, D., & Younesi, R. (2016) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00491 · Cited by 464
Zhao, Y., Ding, Y., Li, Y., Peng, L., Byon, H. R., Goodenough, J. B., & Yu, G. (2015) · Chemical Society Reviews · doi:10.1039/c5cs00289c · Cited by 458
Stabilizing Lithium Metal Anodes by Uniform Li-Ion Flux Distribution in Nanochannel Confinement
Liu, W., Lin, D., Pei, A., & Cui, Y. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b08730 · Cited by 455
Rechargeable Sodium All-Solid-State Battery
Zhou, W., Li, Y., Xin, S., & Goodenough, J. B. (2017) · ACS Central Science · doi:10.1021/acscentsci.6b00321 · Cited by 453
A highly reversible room-temperature lithium metal battery based on crosslinked hairy nanoparticles
Choudhury, S., Mangal, R., Agrawal, A., & Archer, L. A. (2015) · Nature Communications · doi:10.1038/ncomms10101 · Cited by 450
Hwang, T. H., Jung, D. S., Kim, J.-S., Kim, B. G., & Choi, J. W. (2013) · Nano Letters · doi:10.1021/nl402513x · Cited by 441
Selenium@Mesoporous Carbon Composite with Superior Lithium and Sodium Storage Capacity
Luo, C., Xu, Y., Zhu, Y., Liu, Y., Zheng, S., Liu, Y., Langrock, A., & Wang, C. (2013) · ACS Nano · doi:10.1021/nn403108w · Cited by 439
Ying, H., & Han, W. (2017) · Advanced Science · doi:10.1002/advs.201700298 · Cited by 436
Air-stable, high-conduction solid electrolytes of arsenic-substituted Li4SnS4
Sahu, G., Lin, Z., Li, J., Liu, Z., Dudney, N., & Liang, C. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee43357a · Cited by 434
Designing solid-liquid interphases for sodium batteries
Choudhury, S., Wei, S., Ozhabes, Y., Gunceler, D., Zachman, M. J., Tu, Z., Shin, J. H., Nath, P., Agrawal, A., Kourkoutis, L. F., et al. (2017) · Nature Communications · doi:10.1038/s41467-017-00742-x · Cited by 410
Capacitive Energy Storage from −50 to 100 °C Using an Ionic Liquid Electrolyte
Lin, R., Taberna, P.-L., Fantini, S., Presser, V., Pérez, C. R., Malbosc, F., Rupesinghe, N. L., Teo, K. B. K., Gogotsi, Y., & Simon, P. (2011) · The Journal of Physical Chemistry Letters · doi:10.1021/jz201065t · Cited by 409
Elastic Properties of Alkali Superionic Conductor Electrolytes from First Principles Calculations
Deng, Z., Wang, Z., Chu, I.-H., Luo, J., & Ong, S. P. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.0061602jes · Cited by 406
Wu, B., Wang, S., Lochala, J., Desrochers, D., Liu, B., Zhang, W., Yang, J., & Xiao, J. (2018) · Energy & Environmental Science · doi:10.1039/c8ee00540k · Cited by 406
Origin of H2Evolution in LIBs: H2O Reduction vs. Electrolyte Oxidation
Metzger, M., Strehle, B., Solchenbach, S., & Gasteiger, H. A. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.1151605jes · Cited by 405
Advances and challenges of sodium ion batteries as post lithium ion batteries
Sawicki, M., & Shaw, L. L. (2015) · RSC Advances · doi:10.1039/c5ra08321d · Cited by 401
Lithium–sulfur batteries: from liquid to solid cells
Lin, Z., & Liang, C. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta04727c · Cited by 399
Compatibility issues between electrodes and electrolytes in solid-state batteries
Tian, Y., Shi, T., Richards, W. D., Li, J., Kim, J. C., Bo, S.-H., & Ceder, G. (2017) · Energy & Environmental Science · doi:10.1039/c7ee00534b · Cited by 396
Phosphate Framework Electrode Materials for Sodium Ion Batteries
Fang, Y., Zhang, J., Xiao, L., Ai, X., Cao, Y., & Yang, H. (2017) · Advanced Science · doi:10.1002/advs.201600392 · Cited by 381
Ultrathin Surface Coating Enables the Stable Sodium Metal Anode
Luo, W., Lin, C., Zhao, O., Noked, M., Zhang, Y., Rubloff, G. W., & Hu, L. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201601526 · Cited by 380
Decomposition Reactions of Anode Solid Electrolyte Interphase (SEI) Components with LiPF6
Parimalam, B. S., MacIntosh, A. D., Kadam, R., & Lucht, B. L. (2017) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.7b08433 · Cited by 371
Chen, S., Wen, K., Fan, J., Bando, Y., & Golberg, D. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta03358g · Cited by 367
Superior Stable and Long Life Sodium Metal Anodes Achieved by Atomic Layer Deposition
Zhao, Y., Goncharova, L. V., Lushington, A., Sun, Q., Yadegari, H., Wang, B., Xiao, W., Li, R., & Sun, X. (2017) · Advanced Materials · doi:10.1002/adma.201606663 · Cited by 366
Solid-State Lithium Metal Batteries Promoted by Nanotechnology: Progress and Prospects
Xin, S., You, Y., Wang, S., Gao, H.-C., Yin, Y.-X., & Guo, Y.-G. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00175 · Cited by 366
In situ study of dendritic growth inlithium/PEO-salt/lithium cells
Brissot, C., Rosso, M., Chazalviel, J.-N., Baudry, P., & Lascaud, S. (1998) · Electrochimica Acta · doi:10.1016/s0013-4686(97)10055-x · Cited by 365
Steiger, J., Kramer, D., & Mönig, R. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.03.029 · Cited by 363
Effects of Some Organic Additives on Lithium Deposition in Propylene Carbonate
Mogi, R., Inaba, M., Jeong, S.-K., Iriyama, Y., Abe, T., & Ogumi, Z. (2002) · Journal of The Electrochemical Society · doi:10.1149/1.1516770 · Cited by 360
Kazyak, E., Wood, K. N., & Dasgupta, N. P. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b02789 · Cited by 356
Ethylene Sulfite as Electrolyte Additive for Lithium‐Ion Cells with Graphitic Anodes
Wrodnigg, G. H., Besenhard, J. O., & Winter, M. (1999) · Journal of The Electrochemical Society · doi:10.1149/1.1391630 · Cited by 352
Analysis of internal short-circuit in a lithium ion cell
Santhanagopalan, S., Ramadass, P., & Zhang, J. (. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.05.002 · Cited by 351
Wang, Y., Zhang, B., Lai, W., Xu, Y., Chou, S., Liu, H., & Dou, S. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602829 · Cited by 349
Ionic‐Liquid–Nanoparticle Hybrid Electrolytes: Applications in Lithium Metal Batteries
Lu, Y., Korf, K., Kambe, Y., Tu, Z., & Archer, L. A. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201307137 · Cited by 348
Hybrid Electrolytes with Controlled Network Structures for Lithium Metal Batteries
Pan, Q., Smith, D. M., Qi, H., Wang, S., & Li, C. Y. (2015) · Advanced Materials · doi:10.1002/adma.201502059 · Cited by 345
The Surface Chemistry of Lithium Electrodes in Alkyl Carbonate Solutions
Aurbach, D., Ein‐Ely, Y., & Zaban, A. (1994) · Journal of The Electrochemical Society · doi:10.1149/1.2054718 · Cited by 344
Ambient Temperature Sodium–Sulfur Batteries
Manthiram, A., & Yu, X. (2015) · Small · doi:10.1002/smll.201403257 · Cited by 344
Anodes for Sodium Ion Batteries Based on Tin–Germanium–Antimony Alloys
Farbod, B., Cui, K., Kalisvaart, W. P., Kupsta, M., Zahiri, B., Kohandehghan, A., Lotfabad, E. M., Li, Z., Luber, E. J., & Mitlin, D. (2014) · ACS Nano · doi:10.1021/nn4063598 · Cited by 343
Self-citationLife cycle assessment of sodium-ion batteries
Peters, J., Buchholz, D., Passerini, S., & Weil, M. (2016) · Energy & Environmental Science · doi:10.1039/c6ee00640j · Cited by 340
A Highly Reversible Lithium Metal Anode
Park, M. S., Ma, S. B., Lee, D. J., Im, D., Doo, S.-G., & Yamamoto, O. (2014) · Scientific Reports · doi:10.1038/srep03815 · Cited by 339
A dendrite-suppressing composite ion conductor from aramid nanofibres
Tung, S.-O., Ho, S., Yang, M., Zhang, R., & Kotov, N. A. (2015) · Nature Communications · doi:10.1038/ncomms7152 · Cited by 336
Porous Al Current Collector for Dendrite-Free Na Metal Anodes
Liu, S., Tang, S., Zhang, X., Wang, A., Yang, Q.-H., & Luo, J. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b03185 · Cited by 336
Challenges and issues facing lithium metal for solid-state rechargeable batteries
Mauger, A., Armand, M. B., Julien, C. M., & Zaghib, K. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.04.018 · Cited by 333
3D Flexible Carbon Felt Host for Highly Stable Sodium Metal Anodes
Chi, S., Qi, X., Hu, Y., & Fan, L. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702764 · Cited by 332
Papke, B. L., Ratner, M. A., & Shriver, D. F. (1981) · Journal of Physics and Chemistry of Solids · doi:10.1016/0022-3697(81)90030-5 · Cited by 330
Regulating Li deposition at artificial solid electrolyte interphases
Fan, L., Zhuang, H. L., Gao, L., Lu, Y., & Archer, L. A. (2017) · Journal of Materials Chemistry A · doi:10.1039/c6ta10204b · Cited by 327
Iermakova, D. I., Dugas, R., Palacín, M. R., & Ponrouch, A. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0091513jes · Cited by 325
Oh, S.-M., Myung, S.-T., Yoon, C. S., Lu, J., Hassoun, J., Scrosati, B., Amine, K., & Sun, Y.-K. (2014) · Nano Letters · doi:10.1021/nl500077v · Cited by 314
Na 11 Sn 2 PS 12 : a new solid state sodium superionic conductor
Zhang, Z., Ramos, E. P., Lalère, F., Assoud, A., Kaup, K., Hartman, P., & Nazar, L. F. (2017) · Energy & Environmental Science · doi:10.1039/c7ee03083e · Cited by 313
Design and synthesis of the superionic conductor Na10SnP2S12
Richards, W. D., Tsujimura, T., Miara, L. J., Wang, Y., Kim, J. C., Ong, S. P., Uechi, I., Suzuki, N., & Ceder, G. (2016) · Nature Communications · doi:10.1038/ncomms11009 · Cited by 312
Yildirim, H., Kinaci, A., Chan, M. K. Y., & Greeley, J. P. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b02904 · Cited by 306
Douglas, A., Carter, R., Oakes, L., Share, K., Cohn, A. P., & Pint, C. L. (2015) · ACS Nano · doi:10.1021/acsnano.5b04700 · Cited by 304
Cited by
Liu, W., Liu, P., & Mitlin, D. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202002297 · Cited by 687
Self-citationDesign strategies for nonaqueous multivalent-ion and monovalent-ion battery anodes
Li, M., Lu, J., Ji, X., Li, Y., Shao, Y., Chen, Z., Zhong, C., & Amine, K. (2020) · Nature Reviews Materials · doi:10.1038/s41578-019-0166-4 · Cited by 438
MXene‐Based Dendrite‐Free Potassium Metal Batteries
Tang, X., Zhou, D., Li, P., Guo, X., Sun, B., Liu, H., Yan, K., Gogotsi, Y., & Wang, G. (2020) · Advanced Materials · doi:10.1002/adma.201906739 · Cited by 346
Electroless Formation of a Fluorinated Li/Na Hybrid Interphase for Robust Lithium Anodes
Wang, Y., Liu, F., Fan, G., Qiu, X., Liu, J., Yan, Z., Zhang, K., Cheng, F., & Chen, J. (2021) · Journal of the American Chemical Society · doi:10.1021/jacs.0c12051 · Cited by 283
Metadata
- Authors
- Lee, B., Paek, E., Mitlin, D., & Lee, S. W.
- Venue
- Chemical Reviews
- Publisher
- American Chemical Society (ACS)
- Published
- 2019-04-04
- Volume
- 119
- Issue
- 8
- Pages
- 5416-5460
- ISSN
- 0009-2665 (ISSN-L)
- 1520-6890
- OpenAlex
- W2928415750
- Cited by
- 940
- References
- 338
- FWCI
- 5.98
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.