The DOI matches its Crossref record; 97 of the 97 references it cites were found in a registry or an index.
3D Printing for Electrochemical Energy Applications
Abstract
Additive manufacturing (also known as three-dimensional (3D) printing) is being extensively utilized in many areas of electrochemistry to produce electrodes and devices, as this technique allows for fast prototyping and is relatively low cost. Furthermore, there is a variety of 3D-printing technologies available, which include fused deposition modeling (FDM), inkjet printing, select laser melting (SLM), and stereolithography (SLA), making additive manufacturing a highly desirable technique for electrochemical purposes. In particular, over the last number of years, a significant amount of research into using 3D printing to create electrodes/devices for electrochemical energy conversion and storage has emerged. Strides have been made in this area; however, there are still a number of challenges and drawbacks that need to be overcome in order to 3D print active and stable electrodes/devices for electrochemical energy conversion and storage to rival that of the state-of-the-art. In this Review, we will give an overview of the reasoning behind using 3D printing for these electrochemical applications. We will then discuss how the electrochemical performance of the electrodes/devices are affected by the various 3D-printing technologies and by manipulating the 3D-printed electrodes by post modification techniques. Finally, we will give our insights into the future perspectives of this exciting field based on our discussion through this Review.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. Q., & Hui, D. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.02.012 · Cited by 8,431
What are batteries, fuel cells, and supercapacitors?
Winter, M., & Brodd, R. J. (2004) · Chemical Reviews · doi:10.1021/cr020730k · Cited by 7,389
Atomic Layer Deposition: An Overview
George, S. M. (2010) · Chemical Reviews · doi:10.1021/cr900056b · Cited by 5,814
A comprehensive review on PEM water electrolysis
Carmo, M., Fritz, D. L., Mergel, J., & Stolten, D. (2013) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2013.01.151 · Cited by 5,492
Polymers for 3D Printing and Customized Additive Manufacturing
Ligon, S. C., Liska, R., Stampfl, J., Gurr, M., & Mülhaupt, R. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00074 · Cited by 3,741
Design and Mechanisms of Asymmetric Supercapacitors
Shao, Y., El-Kady, M. F., Sun, J., Li, Y., Zhang, Q., Zhu, M., Wang, H., Dunn, B., & Kaner, R. B. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00252 · Cited by 3,637
Earth-abundant catalysts for electrochemical and photoelectrochemical water splitting
Roger, I., Shipman, M. A., & Symes, M. D. (2017) · Nature Reviews Chemistry · doi:10.1038/s41570-016-0003 · Cited by 3,503
Recent Advances in Electrocatalytic Hydrogen Evolution Using Nanoparticles
Zhu, J., Hu, L., Zhao, P., Lee, L. Y. S., & Wong, K.-Y. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00248 · Cited by 3,133
Recent developments in heterogeneous photocatalysts for solar-driven overall water splitting
Wang, Z., Li, C., & Domen, K. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00542g · Cited by 2,295
Hydrogen production by PEM water electrolysis – A review
Shiva Kumar, S., & Himabindu, V. (2019) · Materials Science for Energy Technologies · doi:10.1016/j.mset.2019.03.002 · Cited by 2,144
Additive manufacturing: scientific and technological challenges, market uptake and opportunities
Tofail, S. A. M., Koumoulos, E. P., Bandyopadhyay, A., Bose, S., O’Donoghue, L., & Charitidis, C. (2018) · Materials Today · doi:10.1016/j.mattod.2017.07.001 · Cited by 2,136
When will fossil fuel reserves be diminished?
Shafiee, S., & Topal, E. (2009) · Energy Policy · doi:10.1016/j.enpol.2008.08.016 · Cited by 2,061
A brief review of atomic layer deposition: from fundamentals to applications
Johnson, R. W., Hultqvist, A., & Bent, S. F. (2014) · Materials Today · doi:10.1016/j.mattod.2014.04.026 · Cited by 1,996
Applications of 2D MXenes in energy conversion and storage systems
Pang, J., Mendes, R. G., Bachmatiuk, A., Zhao, L., Ta, H. Q., Gemming, T., Liu, H., Liu, Z., & Rummeli, M. H. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00324f · Cited by 1,951
Energy storage: The future enabled by nanomaterials
Pomerantseva, E., Bonaccorso, F., Feng, X., Cui, Y., & Gogotsi, Y. (2019) · Science · doi:10.1126/science.aan8285 · Cited by 1,927
Chen, R., Li, Q., Yu, X., Chen, L., & Li, H. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00268 · Cited by 1,678
Yan, Y., Xia, B. Y., Zhao, B., & Wang, X. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta08075h · Cited by 1,368
3D Printing of Interdigitated Li‐Ion Microbattery Architectures
Sun, K., Wei, T., Ahn, B. Y., Seo, J. Y., Dillon, S. J., & Lewis, J. A. (2013) · Advanced Materials · doi:10.1002/adma.201301036 · Cited by 1,341
Robust noble metal-based electrocatalysts for oxygen evolution reaction
Shi, Q., Zhu, C., Du, D., & Lin, Y. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00671g · Cited by 1,161
3D-printing technologies for electrochemical applications
Ambrosi, A., & Pumera, M. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00714c · Cited by 1,040
Self-citationAll Pseudocapacitive MXene‐RuO2 Asymmetric Supercapacitors
Jiang, Q., Kurra, N., Alhabeb, M., Gogotsi, Y., & Alshareef, H. N. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201703043 · Cited by 1,033
Voxelated soft matter via multimaterial multinozzle 3D printing
Skylar-Scott, M. A., Mueller, J., Visser, C. W., & Lewis, J. A. (2019) · Nature · doi:10.1038/s41586-019-1736-8 · Cited by 1,024
Hydrolytic degradation of polylactic acid (PLA) and its composites
Elsawy, M. A., Kim, K.-H., Park, J.-W., & Deep, A. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.05.143 · Cited by 988
Cao, M., Wang, X., Zhang, M., Shu, J., Cao, W., Yang, H., Fang, X., & Yuan, J. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201807398 · Cited by 827
Graphene Oxide‐Based Electrode Inks for 3D‐Printed Lithium‐Ion Batteries
Fu, K., Wang, Y., Yan, C., Yao, Y., Chen, Y., Dai, J., Lacey, S., Wang, Y., Wan, J., Li, T., et al. (2016) · Advanced Materials · doi:10.1002/adma.201505391 · Cited by 758
Supercapacitors Based on Three-Dimensional Hierarchical Graphene Aerogels with Periodic Macropores
Zhu, C., Liu, T., Qian, F., Han, T. Y.-J., Duoss, E. B., Kuntz, J. D., Spadaccini, C. M., Worsley, M. A., & Li, Y. (2016) · Nano Letters · doi:10.1021/acs.nanolett.5b04965 · Cited by 720
Stamping of Flexible, Coplanar Micro‐Supercapacitors Using MXene Inks
Zhang, C. (., Kremer, M. P., Seral‐Ascaso, A., Park, S., McEvoy, N., Anasori, B., Gogotsi, Y., & Nicolosi, V. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201705506 · Cited by 637
Doyle, R. L., Godwin, I. J., Brandon, M. P., & Lyons, M. E. G. (2013) · Physical Chemistry Chemical Physics · doi:10.1039/c3cp51213d · Cited by 600
Redox-Active Polymers for Energy Storage Nanoarchitectonics
Kim, J., Kim, J. H., & Ariga, K. (2017) · Joule · doi:10.1016/j.joule.2017.08.018 · Cited by 549
Parra-Cabrera, C., Achille, C., Kuhn, S., & Ameloot, R. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00631d · Cited by 493
Efficient 3D Printed Pseudocapacitive Electrodes with Ultrahigh MnO2 Loading
Yao, B., Chandrasekaran, S., Zhang, J., Xiao, W., Qian, F., Zhu, C., Duoss, E. B., Spadaccini, C. M., Worsley, M. A., & Li, Y. (2019) · Joule · doi:10.1016/j.joule.2018.09.020 · Cited by 491
Versatile N‐Doped MXene Ink for Printed Electrochemical Energy Storage Application
Yu, L., Fan, Z., Shao, Y., Tian, Z., Sun, J., & Liu, Z. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201901839 · Cited by 487
3D Printable Graphene Composite
Wei, X., Li, D., Jiang, W., Gu, Z., Wang, X., Zhang, Z., & Sun, Z. (2015) · Scientific Reports · doi:10.1038/srep11181 · Cited by 481
3D Printed Graphene Based Energy Storage Devices
Foster, C. W., Down, M. P., Zhang, Y., Ji, X., Rowley-Neale, S. J., Smith, G. C., Kelly, P. J., & Banks, C. E. (2017) · Scientific Reports · doi:10.1038/srep42233 · Cited by 471
3D Printing of Freestanding MXene Architectures for Current‐Collector‐Free Supercapacitors
Yang, W., Yang, J., Byun, J. J., Moissinac, F. P., Xu, J., Haigh, S. J., Domingos, M., Bissett, M. A., Dryfe, R. A. W., & Barg, S. (2019) · Advanced Materials · doi:10.1002/adma.201902725 · Cited by 460
Huang, H., Yan, M., Yang, C., He, H., Jiang, Q., Yang, L., Lu, Z., Sun, Z., Xu, X., Bando, Y., et al. (2019) · Advanced Materials · doi:10.1002/adma.201903415 · Cited by 454
Nanowires for Electrochemical Energy Storage
Zhou, G., Xu, L., Hu, G., Mai, L., & Cui, Y. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00326 · Cited by 439
3D Printing of Customized Li‐Ion Batteries with Thick Electrodes
Wei, T., Ahn, B. Y., Grotto, J., & Lewis, J. A. (2018) · Advanced Materials · doi:10.1002/adma.201703027 · Cited by 434
Achievements, Challenges, and Prospects of Calcium Batteries
Arroyo-de Dompablo, M. E., Ponrouch, A., Johansson, P., & Palacín, M. R. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00339 · Cited by 429
Forming nanomaterials as layered functional structures toward materials nanoarchitectonics
Ariga, K., Ji, Q., Hill, J. P., Bando, Y., & Aono, M. (2012) · NPG Asia Materials · doi:10.1038/am.2012.30 · Cited by 403
Layered and two dimensional metal oxides for electrochemical energy conversion
Browne, M. P., Sofer, Z., & Pumera, M. (2019) · Energy & Environmental Science · doi:10.1039/c8ee02495b · Cited by 396
Self-citationRational Design of Flexible Two-Dimensional MXenes with Multiple Functionalities
Fu, Z., Wang, N., Legut, D., Si, C., Zhang, Q., Du, S., Germann, T. C., Francisco, J. S., & Zhang, R. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00348 · Cited by 396
3D‐Printed All‐Fiber Li‐Ion Battery toward Wearable Energy Storage
Wang, Y., Chen, C., Xie, H., Gao, T., Yao, Y., Pastel, G., Han, X., Li, Y., Zhao, J., Fu, K. (., et al. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201703140 · Cited by 374
Direct 3D Printing of Ultralight Graphene Oxide Aerogel Microlattices
Jiang, Y., Xu, Z., Huang, T., Liu, Y., Guo, F., Xi, J., Gao, W., & Gao, C. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201707024 · Cited by 370
A non-precious metal hydrogen catalyst in a commercial polymer electrolyte membrane electrolyser
King, L. A., Hubert, M. A., Capuano, C., Manco, J., Danilovic, N., Valle, E., Hellstern, T. R., Ayers, K., & Jaramillo, T. F. (2019) · Nature Nanotechnology · doi:10.1038/s41565-019-0550-7 · Cited by 363
Extrusion‐Based 3D Printing of Hierarchically Porous Advanced Battery Electrodes
Lacey, S. D., Kirsch, D. J., Li, Y., Morgenstern, J. T., Zarket, B. C., Yao, Y., Dai, J., Garcia, L. Q., Liu, B., Gao, T., et al. (2018) · Advanced Materials · doi:10.1002/adma.201705651 · Cited by 332
Nanoarchitectonics: a new materials horizon for nanotechnology
Ariga, K., Ji, Q., Nakanishi, W., Hill, J. P., & Aono, M. (2015) · Materials Horizons · doi:10.1039/c5mh00012b · Cited by 305
Benck, J. D., Pinaud, B. A., Gorlin, Y., & Jaramillo, T. F. (2014) · PLoS ONE · doi:10.1371/journal.pone.0107942 · Cited by 289
3D-Printed Graphene/Polylactic Acid Electrodes Promise High Sensitivity in Electroanalysis
Manzanares Palenzuela, C. L., Novotný, F., Krupička, P., Sofer, Z., & Pumera, M. (2018) · Analytical Chemistry · doi:10.1021/acs.analchem.8b00083 · Cited by 275
Self-citation3D Printing Sulfur Copolymer‐Graphene Architectures for Li‐S Batteries
Shen, K., Mei, H., Li, B., Ding, J., & Yang, S. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201701527 · Cited by 256
3D Printing of Carbon Nanotubes-Based Microsupercapacitors
Yu, W., Zhou, H., Li, B. Q., & Ding, S. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b13904 · Cited by 227
(Bio)Analytical chemistry enabled by 3D printing: Sensors and biosensors
Manzanares Palenzuela, C. L., & Pumera, M. (2018) · TrAC Trends in Analytical Chemistry · doi:10.1016/j.trac.2018.03.016 · Cited by 218
Self-citationHelical 3D‐Printed Metal Electrodes as Custom‐Shaped 3D Platform for Electrochemical Devices
Ambrosi, A., Moo, J. G. S., & Pumera, M. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201503902 · Cited by 214
Self-citationHu, J., Jiang, Y., Cui, S., Duan, Y., Liu, T., Guo, H., Lin, L., Lin, Y., Zheng, J., Amine, K., et al. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600856 · Cited by 214
Three dimensional (3D) printed electrodes for interdigitated supercapacitors
Zhao, C., Wang, C., Gorkin, R., Beirne, S., Shu, K., & Wallace, G. G. (2014) · Electrochemistry Communications · doi:10.1016/j.elecom.2014.01.013 · Cited by 213
Three-Dimensional Printed Electrode and Its Novel Applications in Electronic Devices
Foo, C. Y., Lim, H. N., Mahdi, M. A., Wahid, M. H., & Huang, N. M. (2018) · Scientific Reports · doi:10.1038/s41598-018-25861-3 · Cited by 213
Maurel, A., Courty, M., Fleutot, B., Tortajada, H., Prashantha, K., Armand, M., Grugeon, S., Panier, S., & Dupont, L. (2018) · Chemistry of Materials · doi:10.1021/acs.chemmater.8b02062 · Cited by 209
Rocha, V. G., García-Tuñón, E., Botas, C., Markoulidis, F., Feilden, E., D’Elia, E., Ni, N., Shaffer, M., & Saiz, E. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b10285 · Cited by 191
3D Printing of Tunable Energy Storage Devices with Both High Areal and Volumetric Energy Densities
Gao, T., Zhou, Z., Yu, J., Zhao, J., Wang, G., Cao, D., Ding, B., & Li, Y. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201802578 · Cited by 177
Rymansaib, Z., Iravani, P., Emslie, E., Medvidović‐Kosanović, M., Sak‐Bosnar, M., Verdejo, R., & Marken, F. (2016) · Electroanalysis · doi:10.1002/elan.201600017 · Cited by 176
Roy, N., Suzuki, N., Terashima, C., & Fujishima, A. (2019) · Bulletin of the Chemical Society of Japan · doi:10.1246/bcsj.20180250 · Cited by 166
Three-Dimensional Printing of a LiFePO4/Graphite Battery Cell via Fused Deposition Modeling
Maurel, A., Grugeon, S., Fleutot, B., Courty, M., Prashantha, K., Tortajada, H., Armand, M. B., Panier, S., & Dupont, L. (2019) · Scientific Reports · doi:10.1038/s41598-019-54518-y · Cited by 164
Saleh, M. S., Li, J., Park, J., & Panat, R. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.07.006 · Cited by 163
dos Santos, P. L., Katic, V., Loureiro, H. C., dos Santos, M. F., dos Santos, D. P., Formiga, A. L. B., & Bonacin, J. A. (2019) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2018.11.013 · Cited by 163
The potential of proton exchange membrane–based electrolysis technology
Ayers, K. (2019) · Current Opinion in Electrochemistry · doi:10.1016/j.coelec.2019.08.008 · Cited by 162
Toward a remarkable Li-S battery via 3D printing
Gao, X., Sun, Q., Yang, X., Liang, J., Koo, A., Li, W., Liang, J., Wang, J., Li, R., Holness, F. B., et al. (2019) · Nano Energy · doi:10.1016/j.nanoen.2018.12.001 · Cited by 161
Biocompatible Batteries—Materials and Chemistry, Fabrication, Applications, and Future Prospects
Stauss, S., & Honma, I. (2018) · Bulletin of the Chemical Society of Japan · doi:10.1246/bcsj.20170325 · Cited by 151
Binder-jet powder-bed additive manufacturing (3D printing) of thick graphene-based electrodes
Azhari, A., Marzbanrad, E., Yilman, D., Toyserkani, E., & Pope, M. A. (2017) · Carbon · doi:10.1016/j.carbon.2017.04.028 · Cited by 146
Three-Dimensional Printing of a Complete Lithium Ion Battery with Fused Filament Fabrication
Reyes, C., Somogyi, R. D., Niu, S., Cruz, M. A., Yang, F., Catenacci, M. J., Rhodes, C. P., & Wiley, B. J. (2018) · ACS Applied Energy Materials · doi:10.1021/acsaem.8b00885 · Cited by 143
Wirth, D. M., Sheaff, M. J., Waldman, J. V., Symcox, M. P., Whitehead, H. D., Sharp, J. D., Doerfler, J. R., Lamar, A. A., & LeBlanc, G. (2019) · Analytical Chemistry · doi:10.1021/acs.analchem.9b01331 · Cited by 142
Self‐Contained Polymer/Metal 3D Printed Electrochemical Platform for Tailored Water Splitting
Ambrosi, A., & Pumera, M. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201700655 · Cited by 141
Self-citationSingle-step fabrication of electrochemical flow cells utilizing multi-material 3D printing
O’Neil, G. D., Ahmed, S. S., Halloran, K., Janusz, J. N., Rodríguez, A., & Rodríguez, I. M. T. (2018) · Electrochemistry Communications · doi:10.1016/j.elecom.2018.12.006 · Cited by 141
A versatile and membrane-less electrochemical reactor for the electrolysis of water and brine
Hashemi, S. M. H., Karnakov, P., Hadikhani, P., Chinello, E., Litvinov, S., Moser, C., Koumoutsakos, P., & Psaltis, D. (2019) · Energy & Environmental Science · doi:10.1039/c9ee00219g · Cited by 137
Hughes, R. A., Menumerov, E., & Neretina, S. (2017) · Nanotechnology · doi:10.1088/1361-6528/aa77ce · Cited by 134
Yang, G., Mo, J., Kang, Z., Dohrmann, Y., List, F. A., Green, J. B., Babu, S. S., & Zhang, F. (2018) · Applied Energy · doi:10.1016/j.apenergy.2018.02.001 · Cited by 128
Manzanares‐Palenzuela, C. L., Hermanová, S., Sofer, Z., & Pumera, M. (2019) · Nanoscale · doi:10.1039/c9nr02754h · Cited by 127
Self-citation3D Printing for Electrocatalytic Applications
Lee, C., Taylor, A. C., Nattestad, A., Beirne, S., & Wallace, G. G. (2019) · Joule · doi:10.1016/j.joule.2019.06.010 · Cited by 127
Yang, G., Yu, S., Kang, Z., Dohrmann, Y., Bender, G., Pivovar, B. S., Green, J. B., Retterer, S. T., Cullen, D. A., & Zhang, F. (2019) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.12.046 · Cited by 119
2D-Pnictogens: alloy-based anode battery materials with ultrahigh cycling stability
Beladi‐Mousavi, S. M., & Pumera, M. (2018) · Chemical Society Reviews · doi:10.1039/c8cs00425k · Cited by 116
Self-citationZhao, J., Zhang, Y., Zhao, X., Wang, R., Xie, J., Yang, C.-F., Wang, J., Zhang, Q., Li, L., Lu, C., et al. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201900809 · Cited by 111
Hydrolysis of polylactide in aqueous media
Rodriguez, E. J., Marcos, B., & Huneault, M. A. (2016) · Journal of Applied Polymer Science · doi:10.1002/app.44152 · Cited by 110
3D printing of highly flexible supercapacitor designed for wearable energy storage
Areir, M., Xu, Y., Harrison, D. J., & Fyson, J. (2017) · Materials Science and Engineering B · doi:10.1016/j.mseb.2017.09.004 · Cited by 106
Multimaterial 3D-Printed Water Electrolyzer with Earth-Abundant Electrodeposited Catalysts
Ambrosi, A., & Pumera, M. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b04327 · Cited by 93
Self-citationCrystalline Strontium Iridate Particle Catalysts for Enhanced Oxygen Evolution in Acid
Strickler, A. L., Higgins, D. C., & Jaramillo, T. F. (2019) · ACS Applied Energy Materials · doi:10.1021/acsaem.9b00658 · Cited by 90
Yun, X., Lu, B., Xiong, Z., Jia, B., Tang, B., Mao, H., Zhang, T., & Wang, X. (2019) · RSC Advances · doi:10.1039/c9ra04882k · Cited by 89
Huang, X., Chang, S., Lee, W. S. V., Ding, J., & Xue, J. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta03023a · Cited by 88
Su, X., Li, X., Ong, C. Y. A., Herng, T. S., Wang, Y., Peng, E., & Ding, J. (2019) · Advanced Science · doi:10.1002/advs.201801670 · Cited by 84
Hughes, J. P., dos Santos, P. L., Down, M. P., Foster, C. W., Bonacin, J. A., Keefe, E. M., Rowley‐Neale, S. J., & Banks, C. E. (2019) · Sustainable Energy & Fuels · doi:10.1039/c9se00679f · Cited by 84
Mn promotion of rutile TiO2-RuO2 anodes for water oxidation in acidic media
Etzi, M., Goryachev, A., Hofmann, J. P., & Hensen, E. J. M. (2019) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2019.118225 · Cited by 80
Yang, Q., Dong, L., Su, R., Hu, B., Wang, Z., Jin, Y., Wang, Y., Besenbacher, F., & Dong, M. (2019) · Applied Materials Today · doi:10.1016/j.apmt.2019.07.016 · Cited by 64
Browne, M. P., & Mills, A. A. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta02908c · Cited by 59
Self-citationSun, H., Xu, X., Chen, G., Zhou, Y., Lin, H., Chen, C., Ran, R., Zhou, W., & Shao, Z. (2019) · ChemSusChem · doi:10.1002/cssc.201902138 · Cited by 59
Electrochemical water oxidation: The next five years
Godwin, I. J., Rovetta, A., Lyons, M. E. G., & Coleman, J. N. (2017) · Current Opinion in Electrochemistry · doi:10.1016/j.coelec.2017.09.025 · Cited by 53
Maier, M., Meyer, Q. P.-G., Majasan, J. O., Tan, C., Dedigama, I., Robinson, J. B., Dodwell, J., Wu, Y., Castanheira, L., Hinds, G., et al. (2019) · Journal of Power Sources · doi:10.1016/j.jpowsour.2019.03.061 · Cited by 44
Mallik, A., & Ray, B. C. (2011) · International Journal of Electrochemistry · doi:10.4061/2011/568023 · Cited by 40
A 3D‐Printed Electrochemical Water Splitting Cell
Lee, C., Taylor, A. C., Beirne, S., & Wallace, G. G. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201900433 · Cited by 33
Tanzi, M. C., Farè, S., & Candiani, G. (2019) · Elsevier eBooks · doi:10.1016/b978-0-08-101034-1.00003-7 · Cited by 13
Research works printed but not linked: 36
- International Energy Agency, 2017, Key World Energy Statistics
- 10.1246/bcsj.20180258 · doi:10.1246/bcsj.20180258
- 10.1016/j.jpowsour.2019.03.062 · DOI
- 10.1016/j.electacta.2018.10.031 · doi:10.1016/j.electacta.2018.10.031
- 10.1021/cr500639y · doi:10.1021/cr500639y
- 10.1038/s41427-018-0022-9 · DOI
- 10.1016/j.apmt.2019.100530 · doi:10.1016/j.apmt.2019.100530
- 10.1007/s00339-017-1238-1 · doi:10.1007/s00339-017-1238-1
- 10.1002/batt.201800148 · doi:10.1002/batt.201800148
- 10.1002/aenm.201701060 · doi:10.1002/aenm.201701060
- 10.1016/j.ijheatmasstransfer.2017.07.092 · DOI
- 10.1002/admt.201600047 · doi:10.1002/admt.201600047
- 10.1002/smll.201901830 · doi:10.1002/smll.201901830
- 10.1038/s41467-019-09398-1 · doi:10.1038/s41467-019-09398-1
- 10.1039/C4EE01426J · doi:10.1039/c4ee01426j
- 10.1002/aenm.201900994 · doi:10.1002/aenm.201900994
- 10.1016/j.solmat.2019.110033 · doi:10.1016/j.solmat.2019.110033
- 10.1021/acsami.8b14701 · doi:10.1021/acsami.8b14701
- 10.1021/acssuschemeng.8b04327 · DOI
- 10.1039/C9CC03774H · doi:10.1039/c9cc03774h
- 10.1179/0020296713Z.000000000161 · doi:10.1179/0020296713z.000000000161
- 10.2174/1573413714666180817130835 · doi:10.2174/1573413714666180817130835
- 10.1108/ACMM-08-2017-1826 · doi:10.1108/acmm-08-2017-1826
- 10.1016/j.elecom.2019.04.004 · doi:10.1016/j.elecom.2019.04.004
- 10.1021/acsami.9b06683 · doi:10.1021/acsami.9b06683
- 10.1016/j.addma.2019.03.016 · doi:10.1016/j.addma.2019.03.016
- 10.1039/C9TA11949C · doi:10.1039/c9ta11949c
- 10.1002/celc.201901541 · doi:10.1002/celc.201901541
- 10.1016/j.est.2017.12.020 · doi:10.1016/j.est.2017.12.020
- 10.1080/10426914.2017.1401712 · doi:10.1080/10426914.2017.1401712
- 10.1016/j.electacta.2019.06.163 · doi:10.1016/j.electacta.2019.06.163
- 10.1002/aenm.201800408 · DOI
- 10.1002/adfm.201903588 · doi:10.1002/adfm.201903588
- 10.1016/j.jmapro.2016.12.020 · doi:10.1016/j.jmapro.2016.12.020
- 10.1016/j.ceramint.2019.04.124 · doi:10.1016/j.ceramint.2019.04.124
- 10.1002/aenm.201803019 · doi:10.1002/aenm.201803019
Cited by
Yang, X., Adair, K. R., Gao, X., & Sun, X. (2021) · Energy & Environmental Science · doi:10.1039/d0ee02714f · Cited by 392
Direct ink writing advances in multi-material structures for a sustainable future
Rocha, V. G., Saiz, E., Tirichenko, I. S., & García-Tuñón, E. (2020) · Journal of Materials Chemistry A · doi:10.1039/d0ta04181e · Cited by 327
Design and Manufacture of 3D-Printed Batteries
Lyu, Z., Lim, G. J. H., Koh, J. J., Li, Y., Ma, Y., Ding, J., Wang, J., Hu, Z., Wang, J., Chen, W., et al. (2021) · Joule · doi:10.1016/j.joule.2020.11.010 · Cited by 321
The reformation of catalyst: From a trial-and-error synthesis to rational design
Wang, L., Wu, J., Wang, S., Liu, H., Wang, Y., & Wang, D. (2024) · Nano Research · doi:10.1007/s12274-023-6037-8 · Cited by 300
Wide Voltage Aqueous Asymmetric Supercapacitors: Advances, Strategies, and Challenges
Huang, J., Yuan, K., & Chen, Y. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202108107 · Cited by 289
Metadata
- Authors
- Browne, M. P., Redondo, E., & Pumera, M.
- Venue
- Chemical Reviews
- Publisher
- American Chemical Society (ACS)
- Published
- 2020-02-12
- Volume
- 120
- Issue
- 5
- Pages
- 2783-2810
- ISSN
- 0009-2665 (ISSN-L)
- 1520-6890
- OpenAlex
- W3006489879
- Cited by
- 434
- References
- 97
- FWCI
- 6.59
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- Funders
- European Regional Development Fund (CZ.02.2.69/ 0.0/0.0/16_027/0008351)
- Ministerstvo ?kolstv?, Ml?de?e a Telov?chovy (CZ.02.2.69/0.0/0.0/16_027/0008371)
- Grantov? Agentura Cesk? Republiky (19-26896X)
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.