The DOI matches its Crossref record; 156 of the 156 references it cites were found in a registry or an index.
Evolution of Bioinks and Additive Manufacturing Technologies for 3D Bioprinting
Abstract
3D printing is an additive manufacturing (AM) technique that has quickly disrupted traditional design and manufacturing strategies. New structures can be manufactured that could not be fabricated using other methods. These new capabilities are considered by many to hallmark a historic shift representative of a new industrial revolution. Exciting utilities of this evolving technology are the fields of biomedical engineering and translational medicine, particularly in applying three-dimensional (3D) printing toward enabling on-demand fabrication of customized tissue scaffolds and medical device geometries. AM techniques are promising a future where on-demand production of patient-specific living tissues is a reality. In this review, we cover the rapid evolution and widespread concepts of a bio-"ink" and bioprinted devices and tissues from the past two decades as well as review the various additive manufacturing methods that have been used toward 3D bioprinting of cells and scaffolds with a special look at the benefits and practical considerations for each method. Despite being a young technology, the evolution and impact of AM in the fields of tissue engineering and regenerative medicine has progressed rapidly. We finish the review by looking toward the future of bioprinting and identify some of the current bottlenecks facing the blossoming industry.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
1 retracted
Xu, S., Xu, S., Zhou, P., Cheng, X., Xie, Y., Liang, C., & Li, C. (2013) · International Journal of Nanomedicine · doi:10.2147/ijn.s50685 · Cited by 198
Retracted3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
Carrageenin-Induced Edema in Hind Paw of the Rat as an Assay for Antiinflammatory Drugs
Winter, C. A., Risley, E. A., & Nuss, G. W. (1962) · Experimental Biology and Medicine · doi:10.3181/00379727-111-27849 · Cited by 5,688
Inkjet Printing—Process and Its Applications
Singh, M., Haverinen, H. M., Dhagat, P., & Jabbour, G. E. (2010) · Advanced Materials · doi:10.1002/adma.200901141 · Cited by 2,375
Fused deposition modeling of novel scaffold architectures for tissue engineering applications
Zein, I., Hutmacher, D. W., Tan, K. C., & Teoh, S. H. (2002) · Biomaterials · doi:10.1016/s0142-9612(01)00232-0 · Cited by 1,874
Hinton, T. J., Jallerat, Q., Palchesko, R. N., Park, J. H., Grodzicki, M. S., Shue, H.-J., Ramadan, M. H., Hudson, A. R., & Feinberg, A. W. (2015) · Science Advances · doi:10.1126/sciadv.1500758 · Cited by 1,805
Evaluation of 3D Printing and Its Potential Impact on Biotechnology and the Chemical Sciences
Gross, B. C., Erkal, J. L., Lockwood, S. Y., Chen, C., & Spence, D. M. (2014) · Analytical Chemistry · doi:10.1021/ac403397r · Cited by 1,746
Recent advances in 3D printing of biomaterials
Chia, H. N., & Wu, B. M. (2015) · Journal of Biological Engineering · doi:10.1186/s13036-015-0001-4 · Cited by 1,734
Photopolymerizable hydrogels for tissue engineering applications
Nguyen, K. T., & West, J. L. (2002) · Biomaterials · doi:10.1016/s0142-9612(02)00175-8 · Cited by 1,669
3D printing based on imaging data: review of medical applications
Rengier, F., Mehndiratta, A., von Tengg-Kobligk, H., Zechmann, C. M., Unterhinninghofen, R., Kauczor, H.-U., & Giesel, F. L. (2010) · International Journal of Computer Assisted Radiology and Surgery · doi:10.1007/s11548-010-0476-x · Cited by 1,584
Matrigel: A complex protein mixture required for optimal growth of cell culture
Hughes, C. S., Postovit, L. M., & Lajoie, G. A. (2010) · PROTEOMICS · doi:10.1002/pmic.200900758 · Cited by 1,534
Athanasiou, K. A., Niederauer, G. G., & Agrawal, C. M. (1996) · Biomaterials · doi:10.1016/0142-9612(96)85754-1 · Cited by 1,497
Thermosensitive sol-gel reversible hydrogels
Jeong, B., Kim, S. W., & Bae, Y. H. (2002) · Advanced Drug Delivery Reviews · doi:10.1016/s0169-409x(01)00242-3 · Cited by 1,478
Hutmacher, D. W., Schantz, T., Zein, I., Ng, K. W., Teoh, S. H., & Tan, K. C. (2001) · Journal of Biomedical Materials Research · doi:10.1002/1097-4636(200105)55:2<203::aid-jbm1007>3.0.co;2-7 · Cited by 1,409
Scaffold-free vascular tissue engineering using bioprinting
Norotte, C., Marga, F. S., Niklason, L. E., & Forgacs, G. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.06.034 · Cited by 1,339
Hutmacher, D. W., Sittinger, M., & Risbud, M. V. (2004) · Trends in Biotechnology · doi:10.1016/j.tibtech.2004.05.005 · Cited by 1,121
Steinberg, M. S. (1963) · Science · doi:10.1126/science.141.3579.401 · Cited by 1,108
Inkjet printing of viable mammalian cells
Xu, T., Jin, J., Gregory, C., Hickman, J. J., & Boland, T. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.04.011 · Cited by 1,035
Main properties and current applications of some polysaccharides as biomaterials
Rinaudo, M. (2008) · Polymer International · doi:10.1002/pi.2378 · Cited by 1,028
3D Bioprinting of heterogeneous aortic valve conduits with alginate/gelatin hydrogels
Duan, B., Hockaday, L. A., Kang, K. H., & Butcher, J. T. (2013) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.34420 · Cited by 1,002
Fibrin: A versatile scaffold for tissue engineering applications
Ahmed, T. A. E., Dare, E. V., & Hincke, M. (2008) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2007.0435 · Cited by 994
Mannoor, M. S., Jiang, Z., James, T., Kong, Y. L., Malatesta, K. A., Soboyejo, W. O., Verma, N., Gracias, D. H., & McAlpine, M. C. (2013) · Nano Letters · doi:10.1021/nl4007744 · Cited by 874
Biodegradable Cellulose-based Hydrogels: Design and Applications
Sannino, A., Demitri, C., & Madaghiele, M. (2009) · Materials · doi:10.3390/ma2020353 · Cited by 845
3D printing of composite calcium phosphate and collagen scaffolds for bone regeneration
Inzana, J. A., Olvera, D., Fuller, S. M., Kelly, J. P., Graeve, O. A., Schwarz, E. M., Kates, S. L., & Awad, H. A. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2014.01.064 · Cited by 840
Antigenicity and immunogenicity of collagen
Lynn, A. K., Yannas, I. V., & Bonfield, W. (2004) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.30096 · Cited by 823
Weisel, J. W. (2005) · Advances in Protein Chemistry · doi:10.1016/s0065-3233(05)70008-5 · Cited by 816
Synthetic polymer scaffolds for tissue engineering
Place, E. S., George, J. H., Williams, C. K., & Stevens, M. M. (2009) · Chemical Society Reviews · doi:10.1039/b811392k · Cited by 815
De novo reconstitution of a functional mammalian urinary bladder by tissue engineering
Oberpenning, F., Meng, J., Yoo, J. J., & Atala, A. (1999) · Nature Biotechnology · doi:10.1038/6146 · Cited by 800
Morris, E. R., Nishinari, K., & Rinaudo, M. (2012) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2012.01.004 · Cited by 762
A review of rapid prototyping techniques for tissue engineering purposes
Peltola, S. M., Melchels, F. P. W., Grijpma, D. W., & Kellomäki, M. (2008) · Annals of Medicine · doi:10.1080/07853890701881788 · Cited by 751
Three‐dimensional printing of porous ceramic scaffolds for bone tissue engineering
Seitz, H., Rieder, W., Irsen, S., Leukers, B., & Tille, C. (2005) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.30291 · Cited by 742
Aguado, B. A., Mulyasasmita, W., Su, J., Lampe, K. J., & Heilshorn, S. C. (2012) · Tissue Engineering Part A · doi:10.1089/ten.tea.2011.0391 · Cited by 719
Chaotic mixing in three-dimensional microvascular networks fabricated by direct-write assembly
Therriault, D., White, S. R., & Lewis, J. A. (2003) · Nature Materials · doi:10.1038/nmat863 · Cited by 707
A novel degradable polycaprolactone networks for tissue engineering
Kweon, H. (2003) · Biomaterials · doi:10.1016/s0142-9612(02)00370-8 · Cited by 686
Direct-write bioprinting of cell-laden methacrylated gelatin hydrogels
Bertassoni, L. E., Cardoso, J. C., Manoharan, V., Cristino, A. L., Bhise, N. S., Araujo, W. A., Zorlutuna, P., Vrana, N. E., Ghaemmaghami, A. M., Dokmeci, M. R., et al. (2014) · Biofabrication · doi:10.1088/1758-5082/6/2/024105 · Cited by 642
Writing in the granular gel medium
Bhattacharjee, T., Zehnder, S. M., Rowe, K. G., Jain, S., Nixon, R. M., Sawyer, W. G., & Angelini, T. E. (2015) · Science Advances · doi:10.1126/sciadv.1500655 · Cited by 635
Xu, T., Binder, K. W., Albanna, M. Z., Dice, D., Zhao, W., Yoo, J. J., & Atala, A. (2012) · Biofabrication · doi:10.1088/1758-5082/5/1/015001 · Cited by 631
Landers, R., Hübner, U., Schmelzeisen, R., & Mülhaupt, R. (2002) · Biomaterials · doi:10.1016/s0142-9612(02)00139-4 · Cited by 624
Xu, T., Zhao, W., Zhu, J.-M., Albanna, M. Z., Yoo, J. J., & Atala, A. (2013) · Biomaterials · doi:10.1016/j.biomaterials.2012.09.035 · Cited by 607
Tissue engineering by self-assembly and bio-printing of living cells
Jakab, K., Norotte, C., Marga, F., Murphy, K., Vunjak-Novakovic, G., & Forgacs, G. (2010) · Biofabrication · doi:10.1088/1758-5082/2/2/022001 · Cited by 593
Schmedlen, R. H., Masters, K. S., & West, J. L. (2002) · Biomaterials · doi:10.1016/s0142-9612(02)00177-1 · Cited by 569
Chang, R., Nam, J., & Sun, W. (2008) · Tissue Engineering Part A · doi:10.1089/ten.a.2007.0004 · Cited by 549
Cell and organ printing 1: Protein and cell printers
Wilson, W. C., & Boland, T. (2003) · The Anatomical Record Part A: Discoveries in Molecular, Cellular, and Evolutionary Biology · doi:10.1002/ar.a.10057 · Cited by 531
Chen, Q.-Z., Bismarck, A., Hansen, U., Junaid, S., Tran, M. Q., Harding, S. E., Ali, N. N., & Boccaccini, A. R. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2007.09.010 · Cited by 530
Tunable Inverse Opal Hydrogel pH Sensors
Lee, Y. ‐., & Braun, P. V. (2003) · Advanced Materials · doi:10.1002/adma.200304588 · Cited by 526
Elastin as a biomaterial for tissue engineering
Daamen, W. F., Veerkamp, J. H., van Hest, J. C. M., & van Kuppevelt, T. H. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2007.06.025 · Cited by 518
Direct writing in three dimensions
Lewis, J. A., & Gratson, G. M. (2004) · Materials Today · doi:10.1016/s1369-7021(04)00344-x · Cited by 507
Skardal, A., Zhang, J., & Prestwich, G. D. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.04.045 · Cited by 461
Butscher, A., Bohner, M., Hofmann, S., Gauckler, L., & Müller, R. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.09.039 · Cited by 459
Biocompatibility analysis of poly(glycerol sebacate) as a nerve guide material
Sundback, C. A., Shyu, J. Y., Wang, Y., Faquin, W. C., Langer, R. S., Vacanti, J. P., & Hadlock, T. A. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.02.004 · Cited by 443
Microarray fabrication with covalent attachment of DNA using Bubble Jet technology
Okamoto, T., Suzuki, T., & Yamamoto, N. (2000) · Nature Biotechnology · doi:10.1038/74507 · Cited by 440
Prestwich, G. D., Marecak, D. M., Marecek, J. F., Vercruysse, K. P., & Ziebell, M. R. (1998) · Journal of Controlled Release · doi:10.1016/s0168-3659(97)00242-3 · Cited by 423
Bioprinting for stem cell research
Tasoglu, S., & Demirci, U. (2013) · Trends in Biotechnology · doi:10.1016/j.tibtech.2012.10.005 · Cited by 422
Duan, B., Wang, M., Zhou, W. Y., Cheung, W. L., Li, Z. Y., & Lu, W. W. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.06.024 · Cited by 420
Wiria, F. E., Leong, K. F., Chua, C. K., & Liu, Y. (2007) · Acta Biomaterialia · doi:10.1016/j.actbio.2006.07.008 · Cited by 405
Shin, H., Olsen, B. D., & Khademhosseini, A. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2011.12.050 · Cited by 400
Gradient biomaterials for soft-to-hard interface tissue engineering
Seidi, A., Ramalingam, M., Elloumi-Hannachi, I., Ostrovidov, S., & Khademhosseini, A. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.01.011 · Cited by 398
Engineering biological structures of prescribed shape using self-assembling multicellular systems
Jakab, K., Neagu, A., Mironov, V., Markwald, R. R., & Forgacs, G. (2004) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0400164101 · Cited by 394
Biomaterials for Vascular Tissue Engineering
Ravi, S., & Chaikof, E. L. (2010) · Regenerative Medicine · doi:10.2217/rme.09.77 · Cited by 387
Lee, Y., Chung, H. J., Yeo, S., Ahn, C.-H., Lee, H., Messersmith, P. B., & Park, T. G. (2010) · Soft Matter · doi:10.1039/b919944f · Cited by 384
Tissue Engineering by Self-Assembly of Cells Printed into Topologically Defined Structures
Jakab, K., Norotte, C., Damon, B., Marga, F., Neagu, A., Besch-Williford, C. L., Kachurin, A., Church, K. H., Park, H., Mironov, V., et al. (2008) · Tissue Engineering Part A · doi:10.1089/tea.2007.0173 · Cited by 378
A 3D bioprinted complex structure for engineering the muscle–tendon unit
Merceron, T. K., Burt, M., Seol, Y.-J., Kang, H.-W., Lee, S. J., Yoo, J. J., & Atala, A. (2015) · Biofabrication · doi:10.1088/1758-5090/7/3/035003 · Cited by 373
Arcaute, K., Mann, B. K., & Wicker, R. B. (2006) · Annals of Biomedical Engineering · doi:10.1007/s10439-006-9156-y · Cited by 364
Vortex-Induced Injectable Silk Fibroin Hydrogels
Yucel, T., Cebe, P., & Kaplan, D. L. (2009) · Biophysical Journal · doi:10.1016/j.bpj.2009.07.028 · Cited by 364
Self-citationCell damage evaluation of thermal inkjet printed Chinese hamster ovary cells
Cui, X., Dean, D., Ruggeri, Z. M., & Boland, T. (2010) · Biotechnology and Bioengineering · doi:10.1002/bit.22762 · Cited by 364
Chitosan based nanofibers, review
Elsabee, M. Z., Naguib, H. F., & Morsi, R. E. (2012) · Materials Science and Engineering C · doi:10.1016/j.msec.2012.05.009 · Cited by 361
Phillippi, J. A., Miller, E., Weiss, L., Huard, J., Waggoner, A., & Campbell, P. (2008) · Stem Cells · doi:10.1634/stemcells.2007-0520 · Cited by 361
Bioprinting technology and its applications
Seol, Y.-J., Kang, H.-W., Lee, S. J., Atala, A., & Yoo, J. J. (2014) · European Journal of Cardio-Thoracic Surgery · doi:10.1093/ejcts/ezu148 · Cited by 355
Toward engineering functional organ modules by additive manufacturing
Marga, F., Jakab, K., Khatiwala, C., Shepherd, B., Dorfman, S., Hubbard, B., Colbert, S., & Gabor, F. (2012) · Biofabrication · doi:10.1088/1758-5082/4/2/022001 · Cited by 348
Bioprinting Endothelial Cells With Alginate for 3D Tissue Constructs
Khalil, S., & Sun, W. (2009) · Journal of Biomechanical Engineering · doi:10.1115/1.3128729 · Cited by 337
Survival and Proliferative Ability of Various Living Cell Types after Laser-Induced Forward Transfer
Hopp, B., Smausz, T., Kresz, N., Barna, N., Bor, Z., Kolozsvári, L., Chrisey, D. B., Szabó, A., & Nógrádi, A. (2005) · Tissue Engineering · doi:10.1089/ten.2005.11.1817 · Cited by 333
Single cell epitaxy by acoustic picolitre droplets
Demirci, U., & Montesano, G. (2007) · Lab on a Chip · doi:10.1039/b704965j · Cited by 326
Review: Bioprinting: A Beginning
Mironov, V., Reis, N., & Derby, B. (2006) · Tissue Engineering · doi:10.1089/ten.2006.12.631 · Cited by 319
3D printing of bone substitute implants using calcium phosphate and bioactive glasses
Bergmann, C., Lindner, M., Zhang, W., Koczur, K., Kirsten, A., Telle, R., & Fischer, H. (2010) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2010.04.037 · Cited by 311
KLEBE, R. (1988) · Experimental Cell Research · doi:10.1016/0014-4827(88)90275-3 · Cited by 310
Synthesis and Characterization of Photocurable Elastomers from Poly(glycerol-co-sebacate)
Nijst, C. L. E., Bruggeman, J. P., Karp, J. M., Ferreira, L., Zumbuehl, A., Bettinger, C. J., & Langer, R. (2007) · Biomacromolecules · doi:10.1021/bm070423u · Cited by 295
Direct‐Write Assembly of 3D Hydrogel Scaffolds for Guided Cell Growth
Barry, R. A., Shepherd, R. F., Hanson, J. N., Nuzzo, R. G., Wiltzius, P., & Lewis, J. A. (2009) · Advanced Materials · doi:10.1002/adma.200803702 · Cited by 295
Direct‐Write Assembly of Microperiodic Silk Fibroin Scaffolds for Tissue Engineering Applications
Ghosh, S., Parker, S. T., Wang, X., Kaplan, D. L., & Lewis, J. A. (2008) · Advanced Functional Materials · doi:10.1002/adfm.200800040 · Cited by 287
Self-citationPolysaccharide‐modified synthetic polymeric biomaterials
Baldwin, A. D., & Kiick, K. L. (2010) · Peptide Science · doi:10.1002/bip.21334 · Cited by 287
Chu, C. R., Coutts, R. D., Yoshioka, M., Harwood, F. L., Monosov, A. Z., & Amiel, D. (1995) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820290915 · Cited by 286
Fabrication of 3D chitosan–hydroxyapatite scaffolds using a robotic dispensing system
Ang, T. H., Sultana, F. S. A., Hutmacher, D. W., Wong, Y. S., Fuh, J. Y. H., Mo, X. M., Loh, H. T., Burdet, E., & Teoh, S. H. (2002) · Materials Science and Engineering: C · doi:10.1016/s0928-4931(02)00010-3 · Cited by 278
Tissue Engineering by Self-Assembly of Cells Printed into Topologically Defined Structures
Jakab, K., Norotte, C., Damon, B., Marga, F., Neagu, A., Besch-Williford, C. L., Kachurin, A., Church, K. H., Park, H., Mironov, V., et al. (2007) · Tissue Engineering · doi:10.1089/ten.2007.0173 · Cited by 273
Photo-patterning of porous hydrogels for tissue engineering
Bryant, S. J., Cuy, J. L., Hauch, K. D., & Ratner, B. D. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2006.11.033 · Cited by 263
Khalyfa, A., Vogt, S., Weisser, J., Grimm, G., Rechtenbach, A., Meyer, W., & Schnabelrauch, M. (2007) · Journal of Materials Science: Materials in Medicine · doi:10.1007/s10856-006-0073-2 · Cited by 247
Inkjet printing of macromolecules on hydrogels to steer neural stem cell differentiation
Ilkhanizadeh, S., Teixeira, A. I., & Hermanson, O. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2007.05.018 · Cited by 246
Application of laser printing to mammalian cells
Barron, J. A., Ringeisen, B. R., Kim, H., Spargo, B. J., & Chrisey, D. B. (2004) · Thin Solid Films · doi:10.1016/j.tsf.2003.11.161 · Cited by 242
Dalton, P. D., Flynn, L., & Shoichet, M. S. (2002) · Biomaterials · doi:10.1016/s0142-9612(02)00120-5 · Cited by 239
Ink‐Jet Printing of Wax‐Based Alumina Suspensions
Seerden, K. A. M., Reis, N., Evans, J. R. G., Grant, P. S., Halloran, J. W., & Derby, B. (2001) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.2001.tb01045.x · Cited by 237
Controlled Positioning of Cells in Biomaterials—Approaches Towards 3D Tissue Printing
Wüst, S., Müller, R., & Hofmann, S. (2011) · Journal of Functional Biomaterials · doi:10.3390/jfb2030119 · Cited by 231
Chrisey, D. B. (2000) · Science · doi:10.1126/science.289.5481.879 · Cited by 227
Castilho, M., Moseke, C., Ewald, A., Gbureck, U., Groll, J., Pires, I., Teßmar, J., & Vorndran, E. (2014) · Biofabrication · doi:10.1088/1758-5082/6/1/015006 · Cited by 211
Organ printing: the future of bone regeneration?
Fedorovich, N. E., Alblas, J., Hennink, W. E., Öner, F. C., & Dhert, W. J. A. (2011) · Trends in Biotechnology · doi:10.1016/j.tibtech.2011.07.001 · Cited by 206
Piezoelectric inkjet printing of polymers: Stem cell patterning on polymer substrates
Kim, J. D., Choi, J. S., Kim, B. S., Chan Choi, Y., & Cho, Y. W. (2010) · Polymer · doi:10.1016/j.polymer.2010.03.038 · Cited by 206
Direct Cell Writing of 3D Microorgan for In Vitro Pharmacokinetic Model
Chang, R., Nam, J., & Sun, W. (2008) · Tissue Engineering Part C: Methods · doi:10.1089/ten.tec.2007.0392 · Cited by 203
Customized PEG‐Derived Copolymers for Tissue‐Engineering Applications
Tessmar, J. K., & Göpferich, A. M. (2007) · Macromolecular Bioscience · doi:10.1002/mabi.200600096 · Cited by 199
3D printed nanocomposite matrix for the study of breast cancer bone metastasis
Zhu, W., Holmes, B., Glazer, R. I., & Zhang, L. G. (2016) · Nanomedicine: Nanotechnology, Biology and Medicine · doi:10.1016/j.nano.2015.09.010 · Cited by 193
Koutsopoulos, S., & Zhang, S. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.09.010 · Cited by 180
Krekoski, C. A., Neubauer, D., Zuo, J., & Muir, D. (2001) · The Journal of Neuroscience · doi:10.1523/jneurosci.21-16-06206.2001 · Cited by 179
Ahn, B. Y., Shoji, D., Hansen, C. J., Hong, E., Dunand, D. C., & Lewis, J. A. (2010) · Advanced Materials · doi:10.1002/adma.200904232 · Cited by 176
Three-dimensional in vitro cancer models: a short review
Wang, C., Tang, Z., Zhao, Y., Yao, R., Li, L., & Sun, W. (2014) · Biofabrication · doi:10.1088/1758-5082/6/2/022001 · Cited by 173
Novel drug delivery devices for providing linear release profiles fabricated by 3DP
Yu, D.-G., Branford-White, C., Ma, Z.-H., Zhu, L.-M., Li, X.-Y., & Yang, X.-L. (2009) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2008.12.008 · Cited by 170
Formation and structure of polyacrylamide gels
Naghash, H. J., & Okay, O. (1996) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19960516)60:7<971::aid-app7>3.0.co;2-j · Cited by 166
3D Powder Printing of β‐Tricalcium Phosphate Ceramics Using Different Strategies
Vorndran, E., Klarner, M., Klammert, U., Grover, L. M., Patel, S., Barralet, J. E., & Gbureck, U. (2008) · Advanced Engineering Materials · doi:10.1002/adem.200800179 · Cited by 164
Three-dimensional printing of freeform helical microstructures: a review
Farahani, R. D., Chizari, K., & Therriault, D. (2014) · Nanoscale · doi:10.1039/c4nr02041c · Cited by 160
Lee, M. H., Arcidiacono, J. A., Bilek, A. M., Wille, J. J., Hamill, C. A., Wonnacott, K., Wells, M. A., & Oh, S. S. (2009) · Tissue Engineering Part B Reviews · doi:10.1089/ten.teb.2009.0449 · Cited by 146
Fang, Y., Frampton, J. P., Raghavan, S. A., Sabahi‐Kaviani, R., Luker, G. D., Deng, C. X., & Takayama, S. (2012) · Tissue Engineering Part C Methods · doi:10.1089/ten.tec.2011.0709 · Cited by 145
Tissue reaction to the biodegradable polylactic acid suture
Cutright, D. E., & Hunsuck, E. E. (1971) · Oral Surgery Oral Medicine Oral Pathology · doi:10.1016/0030-4220(71)90044-2 · Cited by 144
3D Printing for Tissue Engineering
Richards, D., Tan, Y. J., Jia, J., Yao, H., & Mei, Y. (2013) · Israel Journal of Chemistry · doi:10.1002/ijch.201300086 · Cited by 143
Modified gellan gum hydrogels for tissue engineering applications
Ferris, C. J., Gilmore, K. J., Wallace, G. G., & Panhuis, M. I. H. (2013) · Soft Matter · doi:10.1039/c3sm27389j · Cited by 141
Shuai, C., Gao, C., Nie, Y. M., Hu, H., Zhou, Y., & Peng, S. (2011) · Nanotechnology · doi:10.1088/0957-4484/22/28/285703 · Cited by 136
Nahmias, Y., & Odde, D. J. (2006) · Nature Protocols · doi:10.1038/nprot.2006.386 · Cited by 134
The biocompatibility of Pluronic®F127 fibrinogen-based hydrogels
Shachaf, Y., Gonen-Wadmany, M., & Seliktar, D. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2009.12.050 · Cited by 133
Solid freeform fabrication of designer scaffolds of hyaluronic acid for nerve tissue engineering
Suri, S., Han, L., Zhang, W., Singh, A. K., Chen, S., & Schmidt, C. E. (2011) · Biomedical Microdevices · doi:10.1007/s10544-011-9568-9 · Cited by 128
Yu, D., Shen, X., Branford-White, C. J., Zhu, L., White, K., & Xiang, Y. (2009) · Journal of Pharmacy and Pharmacology · doi:10.1211/jpp.61.03.0006 · Cited by 128
Morissette, S. L., Lewis, J. A., Clem, P. G., Cesarano, J., & Dimos, D. (2001) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.2001.tb01036.x · Cited by 127
Preparation and characterization of alginate/gelatin blend fibers
Fan, L., Du, Y., Huang, R., Wang, Q., Wang, X., & Zhang, L. (2005) · Journal of Applied Polymer Science · doi:10.1002/app.21610 · Cited by 127
In situ bioprinting of the skin for burns
Binder, K. W., Zhao, W., Aboushwareb, T. A., Dice, D. D., Atala, A., & Yoo, J. J. (2010) · Journal of the American College of Surgeons · doi:10.1016/j.jamcollsurg.2010.06.198 · Cited by 124
Formulation and Multilayer Jet Printing of Ceramic Inks
Song, J., Edirisinghe, M. J., & Evans, J. (1999) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1999.tb02253.x · Cited by 124
Guo, S., Heuzey, M.-C., & Therriault, D. (2014) · Langmuir · doi:10.1021/la4036425 · Cited by 120
Three-dimensional tissue constructs built by bioprinting
Jakab, K., Damon, B. J., Neagu, A., Kachurin, A., & Forgács, G. (2006) · Biorheology · doi:10.1177/0006355x2006043003004033 · Cited by 114
Polysaccharide-based materials for cartilage tissue engineering applications
Oliveira, J. T., & Reis, R. L. (2010) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.335 · Cited by 111
Projection Microfabrication of Three-Dimensional Scaffolds for Tissue Engineering
Han, L., Mapili, G., Chen, S., & Roy, K. (2008) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.2823079 · Cited by 110
Microfabrication of scaffold-free tissue strands for three-dimensional tissue engineering
Akkouch, A., Yu, Y., & Ozbolat, I. T. (2015) · Biofabrication · doi:10.1088/1758-5090/7/3/031002 · Cited by 109
Inkjet formation of unilamellar lipid vesicles for cell-like encapsulation
Stachowiak, J. C., Richmond, D., Li, T. H., Brochard‐Wyart, F., & Fletcher, D. A. (2009) · Lab on a Chip · doi:10.1039/b904984c · Cited by 105
Effects of surfactant and gentle agitation on inkjet dispensing of living cells
Parsa, S., Gupta, M., Loizeau, F., & Cheung, K. C. (2010) · Biofabrication · doi:10.1088/1758-5082/2/2/025003 · Cited by 105
Li, X., Zhang, X., Zhao, S., Wang, J., Liu, G., & Du, Y. (2013) · Lab on a Chip · doi:10.1039/c3lc51103k · Cited by 97
In vitro andin vivo degradation of poly(propylene fumarate-co-ethylene glycol) hydrogels
Suggs, L. J., Krishnan, R. S., Garcia, C. A., Peter, S. J., Anderson, J., & Mikos, A. G. (1998) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(199811)42:2<312::aid-jbm17>3.0.co;2-k · Cited by 96
Preparation and characterization of poly(propylene fumarate-co-ethylene glycol) hydrogels
Suggs, L. J., Kao, E. Y., Palombo, L. L., Krishnan, R. S., Widmer, M. S., & Mikos, A. G. (1998) · Journal of Biomaterials Science Polymer Edition · doi:10.1163/156856298x00073 · Cited by 84
Bio rapid prototyping by extruding/aspirating/refilling thermoreversible hydrogel
Iwami, K., Noda, T., Ishida, K., Morishima, K., Nakamura, M., & Umeda, N. (2010) · Biofabrication · doi:10.1088/1758-5082/2/1/014108 · Cited by 81
Cross-linked chondroitin sulphate: characterization for drug delivery purposes
Sintov, A. C., Di-Capua, N., & Rubinstein, A. (1995) · Biomaterials · doi:10.1016/0142-9612(95)98820-5 · Cited by 79
Mapping of macrophage elastase cleavage sites in insoluble human skin elastin
Taddese, S., Weiss, A. S., Neubert, R. H. H., & Schmelzer, C. E. H. (2008) · Matrix Biology · doi:10.1016/j.matbio.2008.02.001 · Cited by 76
Physically and Chemically Crosslinked Gelatin Gels
Hellio, D., & Djabourov, M. (2006) · Macromolecular Symposia · doi:10.1002/masy.200650904 · Cited by 74
Li, S., Cai, H. X., Chen, L. K., Wu, Y., Zhu, S. A., Gong, X., Xia, Y. X., Ouyang, H. W., & Zou, X. (2013) · Biomaterials · doi:10.1016/j.biomaterials.2013.11.025 · Cited by 72
A study on the rate of degradation of the bioabsorbable polymer polyglycolic acid (PGA)
Shawe, S., Buchanan, F., Harkin‐Jones, E., & Farrar, D. F. (2006) · Journal of Materials Science · doi:10.1007/s10853-006-0064-1 · Cited by 72
Silk–hyaluronan-based composite hydrogels: A novel, securable vehicle for drug delivery
Elia, R., Newhide, D., Pedevillano, P. D., Reiss, G. R., Firpo, M. A., Hsu, E. W., Kaplan, D. L., Prestwich, G. D., & Peattie, R. A. (2011) · Journal of Biomaterials Applications · doi:10.1177/0885328211424516 · Cited by 72
Self-citationRapid manufacturing techniques for the tissue engineering of human heart valves
Lueders, C., Jastram, B., Hetzer, R., & Schwandt, H. (2014) · European Journal of Cardio-Thoracic Surgery · doi:10.1093/ejcts/ezt510 · Cited by 70
A 3D Bioprinting Exemplar of the Consequences of the Regulatory Requirements on Customized Processes
Hourd, P. C., Medcalf, N., Segal, J. I., & Williams, D. (2015) · Regenerative Medicine · doi:10.2217/rme.15.52 · Cited by 69
3D CELL BIOPRINTING FOR REGENERATIVE MEDICINE RESEARCH AND THERAPIES
Khatiwala, C. B., LAW, R., Shepherd, B. R., Dorfman, S., & CSETE, M. E. (2011) · Gene Therapy and Regulation · doi:10.1142/s1568558611000301 · Cited by 67
Acid and enzymic hydrolysis of Kappa carrageenan
Rochas, C., & Heyraud, A. (1981) · Polymer Bulletin · doi:10.1007/bf00256139 · Cited by 60
High Throughput Micro-Well Generation of Hepatocyte Micro-Aggregates for Tissue Engineering
Gevaert, E., Dollé, L., Billiet, T., Dubruel, P., van Grunsven, L. A., van Apeldoorn, A. A., & Cornelissen, R. (2014) · PLoS ONE · doi:10.1371/journal.pone.0105171 · Cited by 57
Käpylä, E., Sedlačík, T., Aydogan, D. B., Viitanen, J. O., Rypáček, F., & Kellomäki, M. (2014) · Materials Science and Engineering C · doi:10.1016/j.msec.2014.07.027 · Cited by 53
Kenngott, H. G., Wünscher, J. J., Wagner, M., Preukschas, A. A., Wekerle, A.-L., Neher, P., Suwelack, S., Speidel, S., Nickel, F., Oladokun, D., et al. (2015) · Surgical Endoscopy · doi:10.1007/s00464-015-4094-0 · Cited by 48
Dermal substitute-assisted healing: enhancing stem cell therapy with novel biomaterial design
Hodgkinson, T., & Bayat, A. (2011) · Archives of Dermatological Research · doi:10.1007/s00403-011-1131-2 · Cited by 47
Moriya, M., Roschzttardtz, F., Nakahara, Y., Saitô, H., Masubuchi, Y., & Asakura, T. (2009) · Biomacromolecules · doi:10.1021/bm801442g · Cited by 47
Inkjet printing of laminin gradient to investigate endothelial cellular alignment
Cai, K., Dong, H., Chen, C., Yang, L., Jandt, K. D., & Deng, L. (2009) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2009.04.008 · Cited by 45
Wu, W., Zheng, Q., Guo, X., & Huang, W. (2009) · Journal of Wuhan University of Technology-Mater Sci Ed · doi:10.1007/s11595-009-6977-1 · Cited by 44
Ethics of bioengineering organs and tissues
Taylor, D. A., Caplan, A. L., & Macchiarini, P. (2014) · Expert Opinion on Biological Therapy · doi:10.1517/14712598.2014.915308 · Cited by 40
Development of an Automated Freeform Construction System and its Construction Materials
Jeon, K. H., Park, M.-B., Kang, M.-K., & Kim, J. (2013) · International Symposium on Automation and Robotics in Construction (ISARC) · doi:10.22260/isarc2013/0153 · Cited by 30
Mimicking the biological world: Methods for the 3 D structuring of artificial cellular environments
Schober, A., Fernekorn, U., Singh, S., Schlingloff, G., Gebinoga, M., Hampl, J., & Williamson, A. (2013) · Engineering in Life Sciences · doi:10.1002/elsc.201200088 · Cited by 30
3D Cell and Scaffold Patterning Strategies in Tissue Engineering
Sawkins, M. J., Shakesheff, K. M., Bonassar, L. J., & Kirkham, G. R. (2013) · Recent Patents on Biomedical Engineering · doi:10.2174/1874764711306010003 · Cited by 30
Dawes, T. D., Turincio, R., Jones, S. W., et al. (2015) · SLAS TECHNOLOGY · doi:10.1177/2211068215590588 · Cited by 29
Gao, Q., Hu, B., Ning, Q., Ye, C., Xie, J., Ye, J., & Gao, C. (2015) · Journal of Materials Chemistry B · doi:10.1039/c5tb00285k · Cited by 27
Rapid prototyped sutureless anastomosis device from self‐curing silk bio‐ink
Jose, R. R., Raja, W. K., Ibrahim, A. M. S., Koolen, P. G. L., Kim, K., Abdurrob, A., Kluge, J. A., Lin, S. J., Beamer, G., & Kaplan, D. L. (2014) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.33312 · Cited by 24
Self-citationOn-demand three-dimensional printing of surgical supplies in conflict zones
Yu, A. W., & Khan, M. A. (2015) · The Journal of Trauma: Injury, Infection, and Critical Care · doi:10.1097/ta.0000000000000481 · Cited by 22
Precise patterning of biopolymers and cells by direct write technique
Nara, S., Chameettachal, S., & Ghosh, S. (2013) · Materials Technology · doi:10.1179/1753555713y.0000000112 · Cited by 17
Kenari, H. S., Alinejad, Z., Imani, M., & Nodehi, A. (2013) · Journal of Microencapsulation · doi:10.3109/02652048.2013.770096 · Cited by 15
Cited by
Polymers for 3D Printing and Customized Additive Manufacturing
Ligon, S. C., Liska, R., Stampfl, J., Gurr, M., & Mülhaupt, R. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00074 · Cited by 3,741
Hydrogel Bioink Reinforcement for Additive Manufacturing: A Focused Review of Emerging Strategies
Chimene, D., Kaunas, R., & Gaharwar, A. K. (2020) · Advanced Materials · doi:10.1002/adma.201902026 · Cited by 600
Recent advances in bioprinting techniques: approaches, applications and future prospects
Li, J., Chen, M., Fan, X., & Zhou, H. (2016) · Journal of Translational Medicine · doi:10.1186/s12967-016-1028-0 · Cited by 608
Vedadghavami, A., Minooei, F., Mohammadi, M. H., Khetani, S., Rezaei Kolahchi, A., Mashayekhan, S., & Sanati-Nezhad, A. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.07.028 · Cited by 540
Processing of collagen based biomaterials and the resulting materials properties
Meyer, M. (2019) · BioMedical Engineering OnLine · doi:10.1186/s12938-019-0647-0 · Cited by 539
Metadata
- Authors
- Jose, R. R., Rodriguez, M. J., Dixon, T. A., Omenetto, F., & Kaplan, D. L.
- Venue
- ACS Biomaterials Science & Engineering
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-04-07
- Volume
- 2
- Issue
- 10
- Pages
- 1662-1678
- ISSN
- 2373-9878 (ISSN-L)
- OpenAlex
- W2307800673
- Cited by
- 302
- References
- 156
- FWCI
- 18.09
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.