The DOI matches its Crossref record; 46 of the 46 references it cites were found in a registry or an index.
3D Bioprinting of Vessel-like Structures with Multilevel Fluidic Channels
Abstract
In this study, 3D hydrogel-based vascular structures with multilevel fluidic channels (macro-channel for mechanical stimulation and microchannel for nutrient delivery and chemical stimulation) were fabricated by extrusion-based three-dimensional (3D) bioprinting, which could be integrated into organ-on-chip devices that would better simulate the microenvironment of blood vessels. In this approach, partially cross-linked hollow alginate filaments loading fibroblasts and smooth muscle cells were extruded through a coaxial nozzle and then printed along a rotated rod template, and endothelial cells were seeded into the inner wall. Because of the fusion of adjacent hollow filaments, two-level fluidic channels, including a macro-channel in the middle formed from the cylindrical template and a microchannel around the wall resulted from the hollow filaments were formed. By this method, different shapes of vessellike structures of millimeter diameter were printed. The structures printed using 4% alginate exhibited ultimate strength of 0.184 MPa, and L929 mouse fibroblasts encapsulated in the structures showed over 90% survival within 1 week. As a proof of concept, an envisioned load system of both mechanical and chemical stimulation was demonstrated. In addition, a vascular circulation flow system, a cerebral artery surgery simulator, and a cell coculture model were fabricated to demonstrate potential tissue engineering applications of these printed structures.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Reconstituting organ-level lung functions on a chip
Huh, D., Matthews, B. D., Mammoto, A., Montoya-Zavala, M., Hsin, H. Y., & Ingber, D. E. (2010) · Science · doi:10.1126/science.1188302 · Cited by 4,250
3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs
Kolesky, D. B., Truby, R. L., Gladman, A. S., Busbee, T. A., Homan, K. A., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201305506 · Cited by 2,102
Rapid casting of patterned vascular networks for perfusable engineered three-dimensional tissues
Miller, J. S., Stevens, K. R., Yang, M. T., Baker, B. M., Nguyen, D.-H. T., Cohen, D. M., Toro, E., Chen, A. A., Galie, P. A., Yu, X., et al. (2012) · Nature Materials · doi:10.1038/nmat3357 · Cited by 1,917
Hinton, T. J., Jallerat, Q., Palchesko, R. N., Park, J. H., Grodzicki, M. S., Shue, H.-J., Ramadan, M. H., Hudson, A. R., & Feinberg, A. W. (2015) · Science Advances · doi:10.1126/sciadv.1500758 · Cited by 1,805
Current advances and future perspectives in extrusion-based bioprinting
Ozbolat, I. T., & Hospodiuk, M. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2015.10.076 · Cited by 1,572
Three-dimensional bioprinting of thick vascularized tissues
Kolesky, D. B., Homan, K. A., Skylar-Scott, M. A., & Lewis, J. A. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1521342113 · Cited by 1,492
Scaffold-free vascular tissue engineering using bioprinting
Norotte, C., Marga, F. S., Niklason, L. E., & Forgacs, G. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.06.034 · Cited by 1,339
Diniz, B. S., Butters, M. A., Albert, S. M., Dew, M. A., & Reynolds, C. F. (2013) · British Journal of Psychiatry · doi:10.1192/bjp.bp.112.118307 · Cited by 1,290
Sata, M., Saiura, A., Kunisato, A., Tojo, A., Okada, S., Tokuhisa, T., Hirai, H., Makuuchi, M., Hirata, Y., & Nagai, R. (2002) · Nature Medicine · doi:10.1038/nm0402-403 · Cited by 1,148
Depression and the risk for cardiovascular diseases: Systematic review and meta analysis
Van der Kooy, K., van Hout, H., Marwijk, H., Marten, H., Stehouwer, C., & Beekman, A. (2007) · International Journal of Geriatric Psychiatry · doi:10.1002/gps.1723 · Cited by 951
Hydrogel bioprinted microchannel networks for vascularization of tissue engineering constructs
Bertassoni, L. E., Cecconi, M., Manoharan, V., Nikkhah, M., Hjortnaes, J., Cristino, A. L., Barabaschi, G., Demarchi, D., Dokmeci, M. R., Yang, Y., et al. (2014) · Lab Chip · doi:10.1039/c4lc00030g · Cited by 944
Microfluidic Bioprinting of Heterogeneous 3D Tissue Constructs Using Low‐Viscosity Bioink
Colosi, C., Shin, S. R., Manoharan, V., Massa, S., Costantini, M., Barbetta, A., Dokmeci, M. R., Dentini, M., & Khademhosseini, A. (2016) · Advanced Materials · doi:10.1002/adma.201503310 · Cited by 863
Maschmeyer, I., Lorenz, A. K., Schimek, K., Hasenberg, T., Ramme, A. P., Hübner, J., Lindner, M., Drewell, C., Bauer, S., Thomas, A., et al. (2015) · Lab on a Chip · doi:10.1039/c5lc00392j · Cited by 861
Metre-long cell-laden microfibres exhibit tissue morphologies and functions
Onoe, H., Okitsu, T., Itou, A., Kato-Negishi, M., Gojo, R., Kiriya, D., Sato, K., Miura, S., Iwanaga, S., Kuribayashi-Shigetomi, K., et al. (2013) · Nature Materials · doi:10.1038/nmat3606 · Cited by 860
Vascular oxidative stress, nitric oxide and atherosclerosis
Li, H., Horke, S., & Förstermann, U. (2014) · Atherosclerosis · doi:10.1016/j.atherosclerosis.2014.09.001 · Cited by 656
Direct-write bioprinting of cell-laden methacrylated gelatin hydrogels
Bertassoni, L. E., Cardoso, J. C., Manoharan, V., Cristino, A. L., Bhise, N. S., Araujo, W. A., Zorlutuna, P., Vrana, N. E., Ghaemmaghami, A. M., Dokmeci, M. R., et al. (2014) · Biofabrication · doi:10.1088/1758-5082/6/2/024105 · Cited by 642
Writing in the granular gel medium
Bhattacharjee, T., Zehnder, S. M., Rowe, K. G., Jain, S., Nixon, R. M., Sawyer, W. G., & Angelini, T. E. (2015) · Science Advances · doi:10.1126/sciadv.1500655 · Cited by 635
Coaxial nozzle-assisted 3D bioprinting with built-in microchannels for nutrients delivery
Gao, Q., He, Y., Fu, J.-Z., Liu, A., & Ma, L. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.05.031 · Cited by 630
Self-citationZhang, B., Montgomery, M., Chamberlain, M. D., Ogawa, S., Korolj, A., Pahnke, A., Wells, L. A., Massé, S., Kim, J., Reis, L., et al. (2016) · Nature Materials · doi:10.1038/nmat4570 · Cited by 593
Creating perfused functional vascular channels using 3D bio-printing technology
Lee, V. K., Kim, D. Y., Ngo, H., Lee, Y., Seo, L., Yoo, S.-S., Vincent, P. A., & Dai, G. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2014.05.083 · Cited by 494
Lorente-Cebrián, S., Costa, A. G. V., Navas-Carretero, S., Zabala, M., Martínez, J. A., & Moreno-Aliaga, M. J. (2013) · Journal of Physiology and Biochemistry · doi:10.1007/s13105-013-0265-4 · Cited by 417
3D Bioprinting of Spatially Heterogeneous Collagen Constructs for Cartilage Tissue Engineering
Rhee, S., Puetzer, J. L., Mason, B. N., Reinhart-King, C. A., & Bonassar, L. J. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00288 · Cited by 364
Lee, H., & Cho, D.-W. (2016) · Lab on a Chip · doi:10.1039/c6lc00450d · Cited by 363
Scaffold‐free inkjet printing of three‐dimensional zigzag cellular tubes
Xu, C., Chai, W., Huang, Y., & Markwald, R. R. (2012) · Biotechnology and Bioengineering · doi:10.1002/bit.24591 · Cited by 357
Freeform inkjet printing of cellular structures with bifurcations
Christensen, K., Xu, C., Chai, W., Zhang, Z., Fu, J., & Huang, Y. (2015) · Biotechnology and Bioengineering · doi:10.1002/bit.25501 · Cited by 351
Self-citationMicrofluidic spinning of micro- and nano-scale fibers for tissue engineering
Jun, Y., Kang, E., Chae, S., & Lee, S.-H. (2014) · Lab Chip · doi:10.1039/c3lc51414e · Cited by 341
Microfluidic organ-on-chip technology for blood-brain barrier research
van der Helm, M. W., van der Meer, A. D., Eijkel, J. C. T., van den Berg, A., & Segerink, L. I. (2016) · Tissue Barriers · doi:10.1080/21688370.2016.1142493 · Cited by 333
Nishiyama, Y., Nakamura, M., Henmi, C., Yamaguchi, K., Mochizuki, S., Nakagawa, H., & Takiura, K. (2009) · Journal of Biomechanical Engineering · doi:10.1115/1.3002759 · Cited by 322
Narayanan, L. K., Huebner, P., Fisher, M. B., Spang, J. T., Starly, B., & Shirwaiker, R. A. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00196 · Cited by 293
Bioinspired Multicompartmental Microfibers from Microfluidics
Cheng, Y., Zheng, F., Lu, J., Shang, L., Xie, Z., Zhao, Y., Chen, Y., & Gu, Z. (2014) · Advanced Materials · doi:10.1002/adma.201400798 · Cited by 253
Characterization of printable cellular micro-fluidic channels for tissue engineering
Zhang, Y., Yu, Y., Chen, H., & Ozbolat, I. T. (2013) · Biofabrication · doi:10.1088/1758-5082/5/2/025004 · Cited by 246
Fabrication of low cost soft tissue prostheses with the desktop 3D printer
He, Y., Xue, G.-H., & Fu, J.-Z. (2014) · Scientific Reports · doi:10.1038/srep06973 · Cited by 243
Self-citationLight-assisted direct-write of 3D functional biomaterials
Hribar, K. C., Soman, P., Warner, J., Chung, P., & Chen, S. (2014) · Lab Chip · doi:10.1039/c3lc50634g · Cited by 231
Lee, K. H., Shin, S. J., Park, Y., & Lee, S. (2009) · Small · doi:10.1002/smll.200801667 · Cited by 223
Bioprinting of artificial blood vessels: current approaches towards a demanding goal
Hoch, E., Tovar, G. E. M., & Borchers, K. (2014) · European Journal of Cardio-Thoracic Surgery · doi:10.1093/ejcts/ezu242 · Cited by 188
A microfluidic flow-stretch chip for investigating blood vessel biomechanics
Zheng, W., Jiang, B., Wang, D., Zhang, W., Wang, Z., & Jiang, X. (2012) · Lab on a Chip · doi:10.1039/c2lc40173h · Cited by 165
Zhao, L., Lee, V. K., Yoo, S.-S., Dai, G., & Intes, X. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2012.04.004 · Cited by 161
A microfluidic platform for probing small artery structure and function
Günther, A., Yasotharan, S., Vagaon, A., Lochovsky, C., Pinto, S., Yang, J., Lau, C. H., Voigtlaender‐Bolz, J., & Bolz, S. (2010) · Lab on a Chip · doi:10.1039/c004675b · Cited by 156
Assessment of whole blood thrombosis in a microfluidic device lined by fixed human endothelium
Jain, A., van der Meer, A. D., Papa, A.-L., Barrile, R., Lai, A., Schlechter, B. L., Otieno, M. A., Louden, C. S., Hamilton, G. A., Michelson, A. D., et al. (2016) · Biomedical Microdevices · doi:10.1007/s10544-016-0095-6 · Cited by 148
Luo, Y., Lode, A., & Gelinsky, M. (2012) · Advanced Healthcare Materials · doi:10.1002/adhm.201200303 · Cited by 147
3D-printed fluidic networks as vasculature for engineered tissue
Kinstlinger, I. S., & Miller, J. S. (2016) · Lab on a Chip · doi:10.1039/c6lc00193a · Cited by 141
Laser-assisted printing of alginate long tubes and annular constructs
Yan, J., Huang, Y. H., & Chrisey, D. B. (2012) · Biofabrication · doi:10.1088/1758-5082/5/1/015002 · Cited by 130
You, F., Wu, X., Zhu, N., Lei, M., Eames, B. F., & Chen, D. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00258 · Cited by 128
Microfluidic generation of hollow Ca-alginate microfibers
Meng, Z., Wang, W., Xie, R., Ju, X., Liu, Z., & Chu, L. (2016) · Lab on a Chip · doi:10.1039/c6lc00640j · Cited by 68
Self-citationLiberski, A. R., Delaney, J. T., Schäfer, H., Perelaer, J., & Schubert, U. S. (2011) · Macromolecular Bioscience · doi:10.1002/mabi.201100086 · Cited by 33
Sher, P., Oliveira, S. M., Borges, J., & Mano, J. F. (2015) · Biofabrication · doi:10.1088/1758-5090/7/1/011001 · Cited by 32
Cited by
3D bioprinting for biomedical devices and tissue engineering: A review of recent trends and advances
Derakhshanfar, S., Mbeleck, R., Xu, K., Zhang, X., Zhong, W., & Xing, M. (2018) · Bioactive Materials · doi:10.1016/j.bioactmat.2017.11.008 · Cited by 1,027
A Review of 3D Printing Technologies for Soft Polymer Materials
Zhou, L., Fu, J., & He, Y. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202000187 · Cited by 713
Self-citationReview of alginate-based hydrogel bioprinting for application in tissue engineering
Rastogi, P., & Kandasubramanian, B. (2019) · Biofabrication · doi:10.1088/1758-5090/ab331e · Cited by 564
Development of 3D bioprinting: From printing methods to biomedical applications
Gu, Z., Fu, J., Lin, H., & He, Y. (2020) · Asian Journal of Pharmaceutical Sciences · doi:10.1016/j.ajps.2019.11.003 · Cited by 511
Self-citationAskari, M., Afzali Naniz, M., Kouhi, M., Saberi, A., Zolfagharian, A., & Bodaghi, M. (2021) · Biomaterials Science · doi:10.1039/d0bm00973c · Cited by 369
Metadata
- Authors
- Gao, Q., Liu, Z., Lin, Z., Qiu, J., Liu, Y., Liu, A., Wang, Y., Xiang, M., Chen, B., Fu, J., & He, Y.
- Venue
- ACS Biomaterials Science & Engineering
- Publisher
- American Chemical Society (ACS)
- Published
- 2017-02-09
- Volume
- 3
- Issue
- 3
- Pages
- 399-408
- ISSN
- 2373-9878 (ISSN-L)
- OpenAlex
- W2577084245
- Cited by
- 267
- References
- 46
- FWCI
- 10.71
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.