Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat

The DOI matches its Crossref record; 55 of the 55 references it cites were found in a registry or an index; none of the 28 sources its claims cite is checked for support yet.

In-Situ Growth of Few-Layered MoS2 Nanosheets on Highly Porous Carbon Aerogel as Advanced Electrocatalysts for Hydrogen Evolution Reaction

Zhang, Youfang, Zuo, Lizeng, Huang, Yunpeng, Zhang, Longsheng, Lai, Feili, Fan, Wei, Liu, Tianxi · 2015 · ACS Sustainable Chemistry & Engineering

Abstract

Molybdenum disulfide-based hybrids, acting as cost-effective and acid-stable electrocatalysts for hydrogen evolution reaction (HER), have been developed fast for providing sustainable hydrogen energy in recent years. Herein, few-layered molybdenum disulfide (MoS 2 ) nanosheets/carbon aerogel (CA) hybrids were successfully obtained through the combination of sol–gel process, aging, freeze-drying, high temperature carbonization, and solvothermal reaction. CA with highly continuous porosity and high specific surface area is used as a matrix material for construction of hierarchical MoS 2 /CA hybrids where few-layered MoS 2 nanosheets are uniformly covered on a CA surface. In this heterostructured system, CAs not only provide three-dimensional (3D) conductive pathway for fast transportation of electrons and ions, but also offer highly active regions for the growth of MoS 2, greatly preventing the aggregation of MoS 2 nanosheets. Due to the rationally designed hybrids with 3D porous nanostructures, the as-prepared MoS 2 /CA hybrids with optimized MoS 2 content exhibit enhanced catalytic performance for electrocatalytic HER with a low onset potential of −0.14 V, large current density, and excellent stability.

Overview

CoChat Summary

TL;DR

Few-layered MoS2 nanosheets were grown in situ on highly porous carbon aerogel to form MoS2/CA hybrids for the hydrogen evolution reaction. The optimized MoS2/CA-4 hybrid showed a low onset potential of −0.14 V, high current densities, and a Tafel slope of 59 mV/decade with stability over 2000 cycles.

Key findings

  • MoS2/CA-4 exhibited an onset potential of approximately −0.14 V vs RHE, current densities of 1.72 and 9.68 mA/cm2 at overpotentials of 150 and 200 mV, and a Tafel slope of ∼59 mV/decade, compared with ∼86 mV/decade for pure MoS2 and ∼31 mV/decade for Pt.
  • The carbon aerogel had a specific surface area of 978 m2/g; the MoS2/CA-4 hybrid had 107 m2/g versus 13 m2/g for pure MoS2. HRTEM showed 5–8 MoS2 layers with an interlayer spacing of about 0.65 nm.
  • TGA gave MoS2 loadings of 21.6%, 38.4%, and 68.1% for MoS2/CA-2, MoS2/CA-4, and MoS2/CA-8, respectively; MoS2/CA-4 was optimal, while excess MoS2 in MoS2/CA-8 aggregated and reduced performance.
  • MoS2/CA-4 showed similar LSV curves before and after 2000 continuous cycles, and its solution resistance was 10.8 Ω versus 13.0 Ω for pure MoS2.

Methods

  • Synthesis: polyimide-based carbon aerogels derived from graphene cross-linked polyimide aerogels were ball-milled; MoS2/CA hybrids were made by solvothermal reaction of ammonium molybdate and thiourea (1:2 molar ratio) with CA at 200 °C for 12 h, followed by calcination at 300 °C for 2 h under N2, using CA/Mo weight ratios of 1:2, 1:4, and 1:8.
  • Characterization: FESEM, EDX, TEM/HRTEM, XRD, XPS, TGA, and N2 adsorption/desorption isotherms.
  • Electrochemistry: three-electrode cell in 0.5 M H2SO4 with GCE working electrode, SCE reference, and Pt counter electrode; LSV at 2 mV/s, EIS from 100 kHz to 10 mHz with 5 mV amplitude, and stability testing over 2000 cycles between −0.4 and +0.2 V vs RHE; optimal catalyst loading was 20 μg.

Limitations

  • The paper states no explicit limitations.
  • Evident from the text: HER performance was evaluated only in 0.5 M H2SO4, with no alkaline, neutral, or device-scale testing reported.
  • Evident from the text: stability was assessed by 2000 potential sweeps and current–time curves, but no post-test structural or compositional characterization is reported.

Model-written summary. Check it against the paper before relying on it.

Integrity signals

Registry

Crossref · 10.1021/acssuschemeng.5b00700

Cites

55 of 55 references verified0 citation errors · 0 not checkable

Statistics

Nothing to recompute.

Verification

Claims the paper makes

0 Valid · 0 Not valid · 11 Not checked · 58 Own results and interpretations

34 more claims

Create a free account to see all 69 claims and every source verdict.

See all claims — free account
  • It may state two separate claims as one. 25
  • Probably not a substantial claim. 9

Create a free account to see these claims.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Citations

Cites

Cited by

See all 116

Metadata

Authors
Zhang, Y., Zuo, L., Huang, Y., Zhang, L., Lai, F., Fan, W., & Liu, T.
Affiliations
  • Fudan University (CN)
  • Donghua University (CN)
Corresponding author
  • Fan, Wei
  • Liu, Tianxi
Venue
ACS Sustainable Chemistry & Engineering
Published
2015-11-02
Volume
3
Issue
12
Pages
3140-3148
ISSN
2168-0485 (ISSN-L)
OpenAlex
W2460988545
Cited by
116
References
48
Citations by year
2026: 3 · 2025: 5 · 2024: 5 · 2023: 5 · 2022: 12 · 2021: 4 · 2020: 12 · 2019: 20 · 2018: 26 · 2017: 16 · 2016: 8
FWCI
4.93
Type
journal article
Language
en
Open access
closed
Locations
ACS Sustainable Chemistry & Engineering (publishedVersion)
Funders
National Natural Science Foundation of China (51125011, 51433001)
Topics
  • Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Electrocatalysts for Energy Conversion
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Fuel Cells and Related Materials
  • Physical Sciences › Materials Science › Electronic, Optical and Magnetic Materials › Supercapacitor Materials and Fabrication
Keywords
MoS2, MoS2 nanosheets, carbon aerogels, hydrogen evolution reaction, electrocatalysts, in situ growth, hierarchical porous nanostructures, acid stability, hydrogen production, solvothermal synthesis, carbonization

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

A language model drew the claims from the paper on 2026-10-11, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).

A second model labelled each claim on 2026-10-11 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.