The Chemistry and Applications of Antimicrobial Polymers: A State-of-the-Art Review
The DOI matches its Crossref record; 46 of the 46 references it cites were found in a registry or an index.
Abstract
Microbial infection remains one of the most serious complications in several areas, particularly in medical devices, drugs, health care and hygienic applications, water purification systems, hospital and dental surgery equipment, textiles, food packaging, and food storage. Antimicrobials gain interest from both academic research and industry due to their potential to provide quality and safety benefits to many materials. However, low molecular weight antimicrobial agents suffer from many disadvantages, such as toxicity to the environment and short-term antimicrobial ability. To overcome problems associated with the low molecular weight antimicrobial agents, antimicrobial functional groups can be introduced into polymer molecules. The use of antimicrobial polymers offers promise for enhancing the efficacy of some existing antimicrobial agents and minimizing the environmental problems accompanying conventional antimicrobial agents by reducing the residual toxicity of the agents, increasing their efficiency and selectivity, and prolonging the lifetime of the antimicrobial agents. Research concerning the development of antimicrobial polymers represents a great a challenge for both the academic world and industry. This article reviews the state of the art of antimicrobial polymers primarily since the last comprehensive review by one of the authors in 1996. In particular, it discusses the requirements of antimicrobial polymers, factors affecting the antimicrobial activities, methods of synthesizing antimicrobial polymers, major fields of applications, and future and perspectives in the field of antimicrobial polymers.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Although QACs are lethal to a wide variety of organisms, including vegetative cells of gram-positive and gram-negative bacteria, fungi, parasites (e.g. Leishmania major, Plasmodia falciparum), and lipophilic (enveloped) viruses [30], [31], [32],”
From Quaternary ammonium-based biomedical materials: State-of-the-art, toxicological aspects and antimicrobial resistance (2017) · cites this paper as [31]
Citations
Cites
Chitosan as antimicrobial agent: applications and mode of action.
Rabea, E. I., Badawy, M. E.-T., Stevens, C. V., Smagghe, G., & Steurbaut, W. (2003) · Biomacromolecules · doi:10.1021/bm034130m · Cited by 3,123
Review of antimicrobial food packaging
Appendini, P., & Hotchkiss, J. H. (2002) · Innovative Food Science & Emerging Technologies · doi:10.1016/s1466-8564(02)00012-7 · Cited by 1,623
Antimicrobial food packaging in meat industry
Quintavalla, S., & Vicini, L. (2002) · Meat Science · doi:10.1016/s0309-1740(02)00121-3 · Cited by 925
Han, J. H. (2003) · Novel Food Packaging Techniques · doi:10.1533/9781855737020.1.50 · Cited by 594
Novel food packaging techniques
Ahvenainen, R. (2003) · Woodhead Publishing Limited eBooks · doi:10.1533/9781855737020 · Cited by 283
Antimicrobial films produced from chitosan
Bégin, A., & Van Calsteren, M.-R. (1999) · International Journal of Biological Macromolecules · doi:10.1016/s0141-8130(99)00064-1 · Cited by 232
Ikeda, T., Yamaguchi, H., & Tazuke, S. (1984) · Antimicrobial Agents and Chemotherapy · doi:10.1128/aac.26.2.139 · Cited by 203
Antibacterial activity of bactericide-immobilized filler for resin-based restoratives
Imazato, S. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00217-5 · Cited by 196
Neut, D., van de Belt, H., van Horn, J. R., van der Mei, H. C., & Busscher, H. J. (2003) · Biomaterials · doi:10.1016/s0142-9612(02)00614-2 · Cited by 196
Finishing of textile materials
Bajaj, P. (2002) · Journal of Applied Polymer Science · doi:10.1002/app.2262 · Cited by 196
Research works printed but not linked: 89
- Park E.-S., 2001, J. Appl. Polym. Sci., 80, 736
- Bowersock T. L., 1994, J. Controlled Release, 31, 243
- Kenawy E.-R., 2001, J. Appl. Polym. Sci., 82, 1374
- Kenawy E.-R., 2002, Part A: Polym. Chem
- Tan S., 2000, J. Appl. Polym. Sci., 77, 1876
- Li G., 2000, J. Appl. Polym. Sci., 78, 684
- Kamel G. D., 1991, J. Am. Med. Assoc., 265, 2368
- Worley S. D., 1996, Trends Polym. Sci., 4, 370
- Woo G. L. Y., 2002, J. Biomed. Mater. Res., 59, 45
- Hume E. B. H., 2004, Biomaterials, 25, 5030
- Baveja J. K., 2004, Biomaterials, 25, 5021
- Vigo T., 1994, Biotechnol. Bioact. Polym. [Proc. Am. Chem. Soc. Symp.], 237
- Yamamoto T., 2046, Jpn. Patent 94-, 81, 1994
- Kenawy E.-R., 1998, J. Controlled Release, 50, 152
- Eknoian M. W., 1998, J. Bioact. Compat. Polym., 13, 145
- Kanazawa A., 1993, Part A: Polym. Chem
- Bankova M., 1996, Eur. Polym. J., 32, 578
- Oh S. T., 1996, J. Appl. Polym. Sci., 59, 1878
- Bankova M., 1996, Eur. Polym. J., 32, 330
- Kanazawa A., 1993, Part A: Polym. Chem
- Kanazawa A., 1994, Part A: Polym. Chem
- Ikeda T., 1985, Polym. Prepr. (Am. Chem. Soc., Div. Polym. Chem.), 26, 227
- Kanazawa A., 1993, Part A: Polym. Chem
- Kanazawa A., 1993, Part A: Polym. Chem
- Ikeda T., 1990, J. Bioact. Compact. Polym., 5, 41
- Kanazawa A., 1993, Part A: Polym. Chem
- Chen C. Z., 2000, Biomacromolecules, 1, 480
- Tokura S., 1997, Makromol. Symp.
- Al-Muaikel N. S., 2000, J. Appl. Polym. Sci., 77, 745
- Moon W.-S., 2003, J. Appl. Polym. Sci., 90, 2937
- Moon W.-S., 2003, J. Appl. Polym. Sci., 90, 1801
- Oh S. T., 1994, J. Appl. Polym. Sci., 54, 866
- Cho W. J., 1995, J. Macromol. Sci., Pure Appl. Chem., 32, 495
- Park E.-S., 2001, Int. Biodeterior. Biodegrad., 47, 214
- Chen Y., 2004, J. Appl. Polym. Sci., 92, 372
- Qian L., 2004, J. Appl. Polym. Sci., 91, 2593
- Sun Y., 2001, J. Appl. Polym. Sci., 81, 624
- Sun Y., 2003, J. Appl. Polym. Sci., 88, 1039
- Sun Y., 2001, Part A: Polym. Chem
- Sun Y., 2001, J. Appl. Polym. Sci., 80, 2467
- Bankova M., 1998, Eur. Polym. J., 34, 253
- Kanazawa A., 1993, Part A: Polym. Chem
- Liang J., 2005, J. Appl. Polym. Sci., 97, 1166
- Kenawy E.-R., 2006, React. Funct. Polym., 66, 429
- Nonaka T., 1997, J. Appl. Polym. Sci., 66, 1630
- Jeong J.-H., 2002, React. Funct. Polym., 50, 263
- Nonaka T., 1994, Nippon Kagaku Kaishi, 12, 1106
- Nonaka T., 1995, Nippon Kagaku Kaishi, 7, 540
- Frechet J. M., 1994, J. Science, 263, 1715
- Sun G., 1995, J. Bioact. Compat. Polym., 10, 144
- Sun G., 1996, Polymer, 37, 3756
- Sun Y., 2002, Macromolecules, 35, 8912
- Sun Y., 2001, J. Appl. Polym. Sci., 81, 1525
- Chen Y., 2004, J. Appl. Polym. Sci., 92, 367
- Liang J., 2006, Biomaterials, 27, 2501
- Liang J., 2006, J. Appl. Polym. Sci., 101, 3454
- Yu S.-H., 2005, J. Appl. Polym. Sci., 98, 549
- Kenawy E.-R., 2006, J. Appl. Polym. Sci., 99, 2437
- Kenawy E.-R., 2003, Macromol. Biosci., 3, 116
- Cho Y.-W., 1999, Biomaterials, 20, 2145
- Lim S.-H., 2004, Carbohydr. Res., 339, 319
- Kim C. H., 1997, Polym. Bull., 38, 393
- Huh M. W., 2001, J. Appl. Polym. Sci., 81, 2778
- Jung B.-O., 1999, J. Appl. Polym. Sci., 72, 1719
- Nam C.-W., 1999, J. Appl. Polym. Sci., 74, 2265
- Nonaka T., 2000, J. Appl. Polym. Sci., 77, 1086, 10.1002/1097-4628(20000801)77:5<1077::AID-APP15>3.0.CO;2-Q · doi:10.1002/1097-4628(20000801)77:5<1077::aid-app15>3.0.co;2-q
- Kenawy E.-R., 2005, J. Bioact. Compat. Polym., 20, 111
- Woo G. L. Y., 2000, Biomaterials, 21, 1246
- Eknoian M. W., 1998, J. Bioact. Compact. Polym., 13, 314
- Tyag M., 2000, J. Appl. Polym. Sci., 76, 1116
- Tan S., 2000, J. Appl. Polym. Sci., 77, 1876
- Sun Y., 2001, Part A: Polym. Chem
- Chen Y., 2003, Ind. Eng. Chem. Res., 42, 284
- Duncan R., 1984, Adv. Polym. Sci., 57, 101
- Kenawy E.-R., 2002, J. Controlled Release, 81, 64
- Kenawy E.-R., 2002, Macromol. Biosci., 2, 266
- Dernell W. S., 2001, J. Bioact. Compat. Polym., 16, 135
- Imazato S., 1994, J. Dent. Res., 73, 1443
- Imazato S., 1994, J. Dent. Res., 73, 1645
- Hotckiss J., 1997, Food Addit. Contam., 14, 607
- Cutter C., 1999, J. Food Prot., 62, 479
- Paik J. S., 1998, J. Packag. Technol. Sci., 11, 187
- Goldberg S., 1990, J. Bacteriol., 172, 5654
- Cuq B., 1995, Active Food Packaging, 142
- Pardini S., 1986, Imparting antimicrobial activity to acrylics. U.S. Patent 4,708,870
- Son Y.-A., 2003, J. Appl. Polym. Sci., 90, 2199
- Zhu P., 2004, J. Appl. Polym. Sci., 93, 1041
- Choi H.-M., 2004, J. Appl. Polym. Sci., 92, 3354
- Shih C.-Y., 2003, J. Appl. Polym. Sci., 88, 2363
Cited by
Antimicrobial properties of chitosan and mode of action: a state of the art review
Kong, M., Chen, X. G., Xing, K., & Park, H. J. (2010) · International Journal of Food Microbiology · doi:10.1016/j.ijfoodmicro.2010.09.012 · Cited by 3,037
Banerjee, I., Pangule, R. C., & Kane, R. S. (2011) · Advanced Materials · doi:10.1002/adma.201001215 · Cited by 2,749
Antifouling membranes for sustainable water purification: strategies and mechanisms
Zhang, R., Liu, Y., He, M., Su, Y., Zhao, X., Elimelech, M., & Jiang, Z. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00579e · Cited by 1,365
Supported metal nanoparticles on porous materials. Methods and applications
White, R. J., Luque, R., Budarin, V. L., Clark, J. H., & Macquarrie, D. J. (2009) · Chem. Soc. Rev. · doi:10.1039/b802654h · Cited by 1,246
Polymeric materials with antimicrobial activity
Muñoz-Bonilla, A., & Fernández-García, M. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.08.005 · Cited by 1,221
Water-Soluble Conjugated Polymers for Imaging, Diagnosis, and Therapy
Zhu, C., Liu, L., Yang, Q., Lv, F., & Wang, S. (2012) · Chemical Reviews · doi:10.1021/cr200263w · Cited by 1,170
Silver-nanoparticle-embedded antimicrobial paints based on vegetable oil
Kumar, A., Vemula, P. K., Ajayan, P. M., & John, G. (2008) · Nature Materials · doi:10.1038/nmat2099 · Cited by 1,033
Antibacterial surfaces: the quest for a new generation of biomaterials
Hasan, J., Crawford, R. J., & Ivanova, E. P. (2013) · Trends in Biotechnology · doi:10.1016/j.tibtech.2013.01.017 · Cited by 955
Poly(2‐oxazoline)s: A Polymer Class with Numerous Potential Applications
Hoogenboom, R. (2009) · Angewandte Chemie International Edition · doi:10.1002/anie.200901607 · Cited by 889
Alternative Antimicrobial Approach: Nano-Antimicrobial Materials
Beyth, N., Houri-Haddad, Y., Domb, A., Khan, W., & Hazan, R. (2015) · Evidence-Based Complementary and Alternative Medicine · doi:10.1155/2015/246012 · Cited by 837
A polycationic antimicrobial and biocompatible hydrogel with microbe membrane suctioning ability
Li, P., Poon, Y. F., Li, W., Zhu, H.-Y., Yeap, S. H., Cao, Y., Qi, X., Zhou, C., Lamrani, M., Beuerman, R. W., et al. (2011) · Nature Materials · doi:10.1038/nmat2915 · Cited by 822
Chitosan as a Wound Dressing Starting Material: Antimicrobial Properties and Mode of Action
Matica, M. A., Aachmann, F. L., Tøndervik, A., Sletta, H., & Ostafe, V. (2019) · International Journal of Molecular Sciences · doi:10.3390/ijms20235889 · Cited by 818
Sustainable Preparation of Supported Metal Nanoparticles and Their Applications in Catalysis
Campelo, J. M., Luna, D., Luque, R., Marinas, J. M., & Romero, A. A. (2009) · ChemSusChem · doi:10.1002/cssc.200800227 · Cited by 800
Antimicrobial Polymers in Solution and on Surfaces: Overview and Functional Principles
Siedenbiedel, F., & Tiller, J. C. (2012) · Polymers · doi:10.3390/polym4010046 · Cited by 724
Antimicrobial Polymers with Metal Nanoparticles
Palza, H. (2015) · International Journal of Molecular Sciences · doi:10.3390/ijms16012099 · Cited by 723
Jiao, Y., Niu, L.-N., Ma, S., Li, J., Tay, F. R., & Chen, J.-H. (2017) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2017.03.001 · Cited by 639
Biodegradable nanostructures with selective lysis of microbial membranes
Nederberg, F., Zhang, Y., Tan, J. P. K., Xu, K., Wang, H., Yang, C., Gao, S., Guo, X. D., Fukushima, K., Li, L., et al. (2011) · Nature Chemistry · doi:10.1038/nchem.1012 · Cited by 614
Antimicrobial polymers: mechanism of action, factors of activity, and applications
Timofeeva, L., & Kleshcheva, N. (2011) · Applied Microbiology and Biotechnology · doi:10.1007/s00253-010-2920-9 · Cited by 579
Antimicrobial Polymeric Materials with Quaternary Ammonium and Phosphonium Salts
Xue, Y., Xiao, H., & Zhang, Y. (2015) · International Journal of Molecular Sciences · doi:10.3390/ijms16023626 · Cited by 578
González-Henríquez, C. M., Sarabia-Vallejos, M. A., & Rodriguez-Hernandez, J. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2019.03.001 · Cited by 562
Nanoparticles: Alternatives Against Drug-Resistant Pathogenic Microbes
Rudramurthy, G., Swamy, M., Sinniah, U., & Ghasemzadeh, A. (2016) · Molecules · doi:10.3390/molecules21070836 · Cited by 556
Polydopamine antibacterial materials
Fu, Y., Yang, L., Zhang, J., Hu, J., Duan, G., Liu, X., Li, Y., & Gu, Z. (2021) · Materials Horizons · doi:10.1039/d0mh01985b · Cited by 546
Cationic Antimicrobial Polymers and Their Assemblies
Carmona-Ribeiro, A., & De Melo Carrasco, L. (2013) · International Journal of Molecular Sciences · doi:10.3390/ijms14059906 · Cited by 532
López-García, J., Lehocký, M., Humpolíček, P., & Sáha, P. (2014) · Journal of Functional Biomaterials · doi:10.3390/jfb5020043 · Cited by 510
Antibacterial surfaces for biomedical devices
Vasilev, K., Cook, J., & Griesser, H. J. (2009) · Expert Review of Medical Devices · doi:10.1586/erd.09.36 · Cited by 504
Jain, A., Duvvuri, L. S., Farah, S., Beyth, N., Domb, A. J., & Khan, W. (2014) · Advanced Healthcare Materials · doi:10.1002/adhm.201400418 · Cited by 485
Lichter, J. A., Van Vliet, K. J., & Rubner, M. F. (2009) · Macromolecules · doi:10.1021/ma901356s · Cited by 478
Antibacterial Activity of Chitosan-Based Systems
Yilmaz Atay, H. (2019) · Functional Chitosan · doi:10.1007/978-981-15-0263-7_15 · Cited by 471
Fingerprinting food: current technologies for the detection of food adulteration and contamination
Ellis, D. I., Brewster, V. L., Dunn, W. B., Allwood, J. W., Golovanov, A. P., & Goodacre, R. (2012) · Chemical Society Reviews · doi:10.1039/c2cs35138b · Cited by 440
Choudhury, R. R., Gohil, J. M., Mohanty, S., & Nayak, S. K. (2018) · Journal of Materials Chemistry A · doi:10.1039/c7ta08627j · Cited by 420
Synthesis and characterization of metallo-supramolecular polymers
Winter, A., & Schubert, U. S. (2016) · Chemical Society Reviews · doi:10.1039/c6cs00182c · Cited by 403
Nanoparticle-based local antimicrobial drug delivery
Gao, W., Chen, Y., Zhang, Y., Zhang, Q., & Zhang, L. (2018) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2017.09.015 · Cited by 396
Huang, L., Xuan, Y., Koide, Y., Zhiyentayev, T., Tanaka, M., & Hamblin, M. R. (2012) · Lasers in Surgery and Medicine · doi:10.1002/lsm.22045 · Cited by 394
“The Good, the Bad and the Ugly” of Chitosans
Bellich, B., D’Agostino, I., Semeraro, S., Gamini, A., & Cesàro, A. (2016) · Marine Drugs · doi:10.3390/md14050099 · Cited by 375
Chemical Insights into Antibacterial N-Halamines
Dong, A., Wang, Y.-J., Gao, Y., Gao, T., & Gao, G. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00687 · Cited by 374
Chatterjee, A., Santra, M., Won, N., Kim, S., Kim, J. K., Kim, S. B., & Ahn, K. H. (2009) · Journal of the American Chemical Society · doi:10.1021/ja807230c · Cited by 370
Nano-structured antimicrobial surfaces: From nature to synthetic analogues
Elbourne, A., Crawford, R. J., & Ivanova, E. P. (2017) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2017.07.021 · Cited by 365
Inherent Antibacterial Activity of a Peptide-Based β-Hairpin Hydrogel
Salick, D. A., Kretsinger, J. K., Pochan, D. J., & Schneider, J. P. (2007) · Journal of the American Chemical Society · doi:10.1021/ja076300z · Cited by 351
Nanoparticle approaches against bacterial infections
Gao, W., Thamphiwatana, S., Angsantikul, P., & Zhang, L. (2014) · WIREs Nanomedicine and Nanobiotechnology · doi:10.1002/wnan.1282 · Cited by 347
Kuroda, K., Caputo, G. A., & DeGrado, W. F. (2009) · Chemistry – A European Journal · doi:10.1002/chem.200801523 · Cited by 346
Antibacterial quaternary ammonium compounds in dental materials: A systematic review
Makvandi, P., Jamaledin, R., Jabbari, M., Nikfarjam, N., & Borzacchiello, A. (2018) · Dental Materials · doi:10.1016/j.dental.2018.03.014 · Cited by 333
Asri, L. A. T. W., Crismaru, M., Roest, S., Chen, Y., Ivashenko, O., Rudolf, P., Tiller, J. C., van der Mei, H. C., Loontjens, T. J. A., & Busscher, H. J. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201301686 · Cited by 332
Palermo, E. F., & Kuroda, K. (2009) · Biomacromolecules · doi:10.1021/bm900044x · Cited by 331
Antifouling and antimicrobial biomaterials: an overview
Francolini, I., Vuotto, C., Piozzi, A., & Donelli, G. (2017) · APMIS · doi:10.1111/apm.12675 · Cited by 322
Xu, H., Fang, Z., Tian, W., Wang, Y., Ye, Q., Zhang, L., & Cai, J. (2018) · Advanced Materials · doi:10.1002/adma.201801100 · Cited by 318
Biomimetic antimicrobial polymers: recent advances in molecular design
Ergene, C., Yasuhara, K., & Palermo, E. F. (2018) · Polymer Chemistry · doi:10.1039/c8py00012c · Cited by 312
Antimicrobial and Antifouling Strategies for Polymeric Medical Devices
Zander, Z. K., & Becker, M. L. (2018) · ACS Macro Letters · doi:10.1021/acsmacrolett.7b00879 · Cited by 310
Tavakolian, M., Jafari, S. M., & van de Ven, T. G. M. (2020) · Nano-Micro Letters · doi:10.1007/s40820-020-0408-4 · Cited by 310
Bio-based polycarbonate as synthetic toolbox
Hauenstein, O., Agarwal, S., & Greiner, A. (2016) · Nature Communications · doi:10.1038/ncomms11862 · Cited by 305
Bioapplications of hyperbranched polymers
Wang, D., Zhao, T., Zhu, X., Yan, D., & Wang, W. (2015) · Chemical Society Reviews · doi:10.1039/c4cs00229f · Cited by 301
Antimicrobial cationic polymers: from structural design to functional control
Yang, Y., Cai, Z., Huang, Z., Tang, X., & Zhang, X. (2018) · Polymer Journal · doi:10.1038/pj.2017.72 · Cited by 296
Martins, A., Facchi, S., Follmann, H., Pereira, A., Rubira, A., & Muniz, E. (2014) · International Journal of Molecular Sciences · doi:10.3390/ijms151120800 · Cited by 289
Antonucci, J. M., Zeiger, D. N., Tang, K., Lin-Gibson, S., Fowler, B. O., & Lin, N. J. (2012) · Dental Materials · doi:10.1016/j.dental.2011.10.004 · Cited by 287
“Charged moieties, such as quaternary ammonium compounds, have been shown to be effective in reducing bacterial growth in a wide range of applications including medical devices, water purification systems, and textiles [4].”
BackgroundBalasubramaniam, B., Prateek, Ranjan, S., Saraf, M., Kar, P., Singh, S. P., Thakur, V. K., Singh, A., & Gupta, R. K. (2021) · ACS Pharmacology & Translational Science · doi:10.1021/acsptsci.0c00174 · Cited by 285
Structural determinants of antimicrobial activity in polymers which mimic host defense peptides
Palermo, E. F., & Kuroda, K. (2010) · Applied Microbiology and Biotechnology · doi:10.1007/s00253-010-2687-z · Cited by 281
Multi-functional fluorescent carbon dots with antibacterial and gene delivery properties
Dou, Q., Fang, X., Jiang, S., Chee, P. L., Lee, T.-C., & Loh, X. J. (2015) · RSC Advances · doi:10.1039/c5ra07968c · Cited by 276
Hui, F., & Debiemme-Chouvy, C. (2013) · Biomacromolecules · doi:10.1021/bm301980q · Cited by 276
Fernandes, S. C. M., Sadocco, P., Alonso-Varona, A., Palomares, T., Eceiza, A., Silvestre, A. J. D., Mondragon, I., & Freire, C. S. R. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am400338n · Cited by 274
Polymer/nanosilver composite coatings for antibacterial applications
Guo, L., Yuan, W., Lu, Z., & Li, C. M. (2013) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2012.12.029 · Cited by 267
Polyoxazolines for Nonfouling Surface Coatings — A Direct Comparison to the Gold Standard PEG
Konradi, R., Acikgoz, C., & Textor, M. (2012) · Macromolecular Rapid Communications · doi:10.1002/marc.201200422 · Cited by 264
Palermo, E. F., Sovadinova, I., & Kuroda, K. (2009) · Biomacromolecules · doi:10.1021/bm900784x · Cited by 257
Ye, G., Lee, J., Perreault, F., & Elimelech, M. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b06647 · Cited by 256
Liu, S. Q., Yang, C., Huang, Y., Ding, X., Li, Y., Fan, W. M., Hedrick, J. L., & Yang, Y. (2012) · Advanced Materials · doi:10.1002/adma.201202225 · Cited by 255
Current and emergent strategies for disinfection of hospital environments
Abreu, A. C., Tavares, R. R., Borges, A., Mergulhao, F., & Simoes, M. (2013) · Journal of Antimicrobial Chemotherapy · doi:10.1093/jac/dkt281 · Cited by 235
“102, 103 Antimicrobial polymers provide a very suitable strategy for achieving this objective since they can be applied to diverse objects.”
BackgroundSynthesis and characterization of antibacterial dental monomers and composites
Xu, X., Wang, Y., Liao, S., Wen, Z. T., & Fan, Y. (2012) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.32683 · Cited by 144
Chitin and chitosan: origin, properties, and applications
Kumari, S., & Kishor, R. (2020) · Handbook of Chitin and Chitosan · doi:10.1016/b978-0-12-817970-3.00001-8 · Cited by 136
Synthesis of methacrylate monomers with antibacterial effects against S. mutans
He, J., Söderling, E., Österblad, M., Vallittu, P. K., & Lassila, L. V. J. (2011) · Molecules · doi:10.3390/molecules16119755 · Cited by 113
Tailoring Hydrocarbon Polymers and All‐Hydrocarbon Composites for Circular Economy
Hees, T., Zhong, F., Stürzel, M., & Mülhaupt, R. (2019) · Macromolecular Rapid Communications · doi:10.1002/marc.201800608 · Cited by 100
Yari, A., Yeganeh, H., & Bakhshi, H. (2012) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-012-4683-6 · Cited by 89
Mizerska, U., Fortuniak, W., Chojnowski, J., Hałasa, R., Konopacka, A., & Werel, W. (2009) · European Polymer Journal · doi:10.1016/j.eurpolymj.2008.11.045 · Cited by 85
Gong, S.-Q., Niu, L.-N., Kemp, L. K., Yiu, C. K. Y., Ryou, H., Qi, Y.-P., Blizzard, J. D., Nikonov, S., Brackett, M. G., Messer, R. L. W., et al. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.05.031 · Cited by 75
Photocurable antimicrobial quaternary ammonium-modified nanosilica
Makvandi, P., Ghaemy, M., Ghadiri, A. A., & Mohseni, M. (2015) · Journal of Dental Research · doi:10.1177/0022034515599973 · Cited by 65
Incorporation of an antibacterial and radiopaque monomer in to dental resin system
He, J., Söderling, E., Lassila, L. V. J., & Vallittu, P. K. (2012) · Dental Materials · doi:10.1016/j.dental.2012.04.026 · Cited by 64
“[50] Kenawy ER, Worley SD, Broughton R.”
BackgroundHe, J., Söderling, E., Lassila, L. V. J., & Vallittu, P. K. (2015) · Dental Materials · doi:10.1016/j.dental.2015.02.007 · Cited by 58
Mousavi Khaneghah, A., Hashemi, S. M. B., Eş, I., Fracassetti, D., & Limbo, S. (2018) · Journal of Food Protection · doi:10.4315/0362-028x.jfp-17-509 · Cited by 58
He, J., Söderling, E., Vallittu, P. K., & Lassila, L. V. J. (2013) · Journal of Biomaterials Science Polymer Edition · doi:10.1080/09205063.2012.699709 · Cited by 53
Ortega, A., Farah, S., Tranque, P., Ocaña, A. V., Nam‐Cha, S. H., Beyth, N., Gómez‐Roldán, C., Pérez‐Tanoira, R., Domb, A. J., Pérez‐Martínez, F. C., et al. (2015) · IET Nanobiotechnology · doi:10.1049/iet-nbt.2014.0078 · Cited by 38
He, J., Söderling, E., Lassila, L. V. J., & Vallittu, P. K. (2014) · Dental Materials · doi:10.1016/j.dental.2014.05.013 · Cited by 37
Preparation and Evaluation of Dental Resin with Antibacterial and Radio-Opaque Functions
He, J., Söderling, E., Vallittu, P., & Lassila, L. (2013) · International Journal of Molecular Sciences · doi:10.3390/ijms14035445 · Cited by 34
Preparation of chitosan from waste shrimp shells fermented with Paenibacillus jamilae BAT1
Taser, B., Ozkan, H., Adiguzel, A., Orak, T., Baltaci, M. O., & Taskin, M. (2021) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2021.05.062 · Cited by 30
The anti-bacterial poly(caprolactone)-poly(quaternary ammonium salt) as drug delivery carriers
Leng, M., Hu, S., Lu, A., Cai, M., & Luo, X. (2016) · Applied Microbiology and Biotechnology · doi:10.1007/s00253-015-7126-8 · Cited by 20
Metadata
- Authors
- Kenawy, E.-R., Worley, S. D., & Broughton, R.
- Affiliations
- Tanta University (EG)
- Corresponding author
- Kenawy, El-Refaie
- Venue
- Biomacromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2007-04-11
- Volume
- 8
- Issue
- 5
- Pages
- 1359-1384
- ISSN
- 1525-7797 (ISSN-L)
- 1526-4602
- OpenAlex
- W1996275832
- Cited by
- 1,558
- References
- 46
- Citations by year
- 2026: 39 · 2025: 35 · 2024: 62 · 2023: 67 · 2022: 82 · 2021: 111 · 2020: 119 · 2019: 107 · 2018: 98 · 2017: 111 · 2016: 111 · 2015: 122 · 2014: 113 · 2013: 94 · 2012: 83
- FWCI
- 1.71
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Biomacromolecules (publishedVersion)
- PubMed (publishedVersion)
- Topics
- Life Sciences › Immunology and Microbiology › Applied Microbiology and Biotechnology › Antimicrobial agents and applications
- Physical Sciences › Materials Science › Polymers and Plastics › Dyeing and Modifying Textile Fibers
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer Synthesis and Characterization
- Keywords
- antimicrobial polymers, antimicrobial activity, polymer synthesis, medical devices, food packaging, textiles, water purification, dental equipment, microbial infection
- MeSH terms
- Anti-Infective Agents, Bacteria, Polymers, Yeasts, Molecular Structure
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.