The DOI matches its Crossref record; 33 of the 33 references it cites were found in a registry or an index.
Smaller Sulfur Molecules Promise Better Lithium–Sulfur Batteries
Abstract
The lithium-sulfur battery holds a high theoretical energy density, 4-5 times that of today's lithium-ion batteries, yet its applications have been hindered by poor electronic conductivity of the sulfur cathode and, most importantly, the rapid fading of its capacity due to the formation of soluble polysulfide intermediates (Li(2)S(n), n = 4-8). Despite numerous efforts concerning this issue, combatting sulfur loss remains one of the greatest challenges. Here we show that this problem can be effectively diminished by controlling the sulfur as smaller allotropes. Metastable small sulfur molecules of S(2-4) were synthesized in the confined space of a conductive microporous carbon matrix. The confined S(2-4) as a new cathode material can totally avoid the unfavorable transition between the commonly used large S(8) and S(4)(2-). Li-S batteries based on this concept exhibit unprecedented electrochemical behavior with high specific capacity, good cycling stability, and superior rate capability, which promise a practicable battery with high energy density for applications in portable electronics, electric vehicles, and large-scale energy storage systems.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Armand, M., & Tarascon, J.-M. (2008) · Nature · doi:10.1038/451652a · Cited by 19,612
Carbon-Based Supercapacitors Produced by Activation of Graphene
Zhu, Y., Murali, S., Stoller, M. D., Ganesh, K. J., Cai, W., Ferreira, P. J., Pirkle, A., Wallace, R. M., Cychosz, K. A., Thommes, M., et al. (2011) · Science · doi:10.1126/science.1200770 · Cited by 6,140
A highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteries
Ji, X., Lee, K. T., & Nazar, L. F. (2009) · Nature Materials · doi:10.1038/nmat2460 · Cited by 5,988
Nanostructured Materials for Electrochemical Energy Conversion and Storage Devices
Guo, Y., Hu, J., & Wan, L. (2008) · Advanced Materials · doi:10.1002/adma.200800627 · Cited by 2,223
Self-citationWang, H., Yang, Y., Liang, Y., Robinson, J. T., Li, Y., Jackson, A., Cui, Y., & Dai, H. (2011) · Nano Letters · doi:10.1021/nl200658a · Cited by 2,119
Ji, X., & Nazar, L. F. (2010) · Journal of Materials Chemistry · doi:10.1039/b925751a · Cited by 1,967
Sodium Ion Insertion in Hollow Carbon Nanowires for Battery Applications
Cao, Y., Xiao, L., Sushko, M. L., Wang, W., Schwenzer, B., Xiao, J., Nie, Z., Saraf, L. V., Yang, Z., & Liu, J. (2012) · Nano Letters · doi:10.1021/nl3016957 · Cited by 1,929
Porous Hollow Carbon@Sulfur Composites for High‐Power Lithium–Sulfur Batteries
Jayaprakash, N., Shen, J., Moganty, S. S., Corona, A., & Archer, L. A. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201100637 · Cited by 1,811
Development and challenges of LiFePO4cathode material for lithium-ion batteries
Yuan, L.-X., Wang, Z.-H., Zhang, W.-X., Hu, X.-L., Chen, J.-T., Huang, Y.-H., & Goodenough, J. B. (2011) · Energy Environ. Sci. · doi:10.1039/c0ee00029a · Cited by 1,301
Zhang, B., Qin, X., Li, G. R., & Gao, X. P. (2010) · Energy & Environmental Science · doi:10.1039/c002639e · Cited by 1,280
Cited by
Rechargeable Lithium–Sulfur Batteries
Manthiram, A., Fu, Y., Chung, S.-H., Zu, C., & Su, Y.-S. (2014) · Chemical Reviews · doi:10.1021/cr500062v · Cited by 4,665
Lithium–Sulfur Batteries: Electrochemistry, Materials, and Prospects
Yin, Y., Xin, S., Guo, Y., & Wan, L. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201304762 · Cited by 2,707
Self-citationDesigning high-energy lithium–sulfur batteries
Seh, Z. W., Sun, Y., Zhang, Q., & Cui, Y. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00410a · Cited by 2,573
Review on High‐Loading and High‐Energy Lithium–Sulfur Batteries
Peng, H., Huang, J., Cheng, X., & Zhang, Q. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700260 · Cited by 1,746
Xia, W., Mahmood, A., Zou, R., & Xu, Q. (2015) · Energy & Environmental Science · doi:10.1039/c5ee00762c · Cited by 1,717
Lithium–Sulfur Batteries: Progress and Prospects
Manthiram, A., Chung, S., & Zu, C. (2015) · Advanced Materials · doi:10.1002/adma.201405115 · Cited by 1,620
Liquid electrolyte lithium/sulfur battery: Fundamental chemistry, problems, and solutions
Zhang, S. S. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.12.102 · Cited by 1,592
Catalytic oxidation of Li 2 S on the surface of metal sulfides for Li−S batteries
Zhou, G., Tian, H., Jin, Y., Tao, X., Liu, B., Zhang, R., Seh, Z. W., Zhuo, D., Liu, Y., Sun, J., et al. (2017) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1615837114 · Cited by 1,278
Song, J., Xu, T., Gordin, M. L., Zhu, P., Lv, D., Jiang, Y., Chen, Y., Duan, Y., & Wang, D. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201302631 · Cited by 978
Liu, D., Zhang, C., Zhou, G., Lv, W., Ling, G., Zhi, L., & Yang, Q. (2018) · Advanced Science · doi:10.1002/advs.201700270 · Cited by 956
Understanding the Anchoring Effect of Two-Dimensional Layered Materials for Lithium–Sulfur Batteries
Zhang, Q., Wang, Y., Seh, Z. W., Fu, Z., Zhang, R., & Cui, Y. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b00367 · Cited by 931
MoS2/Celgard Separator as Efficient Polysulfide Barrier for Long‐Life Lithium–Sulfur Batteries
Ghazi, Z. A., He, X., Khattak, A. M., Khan, N. A., Liang, B., Iqbal, A., Wang, J., Sin, H., Li, L., & Tang, Z. (2017) · Advanced Materials · doi:10.1002/adma.201606817 · Cited by 902
Advances in Lithium–Sulfur Batteries: From Academic Research to Commercial Viability
Chen, Y., Wang, T., Tian, H., Su, D., Zhang, Q., & Wang, G. (2021) · Advanced Materials · doi:10.1002/adma.202003666 · Cited by 870
Carbon–sulfur composites for Li–S batteries: status and prospects
Wang, D.-W., Zeng, Q., Zhou, G., Yin, L., Li, F., Cheng, H.-M., Gentle, I. R., & Lu, G. Q. M. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta11045a · Cited by 816
Wei, Q., Xiong, F., Tan, S., Huang, L., Lan, E. H., Dunn, B., & Mai, L. (2017) · Advanced Materials · doi:10.1002/adma.201602300 · Cited by 802
Yolk–Shell Structure of Polyaniline-Coated Sulfur for Lithium–Sulfur Batteries
Zhou, W., Yu, Y., Chen, H., DiSalvo, F. J., & Abruña, H. D. (2013) · Journal of the American Chemical Society · doi:10.1021/ja409508q · Cited by 782
Zhang, Q., Huang, J., Qian, W., Zhang, Y., & Wei, F. (2013) · Small · doi:10.1002/smll.201203252 · Cited by 759
A sulfur host based on titanium monoxide@carbon hollow spheres for advanced lithium–sulfur batteries
Li, Z., Zhang, J., Guan, B., Wang, D., Liu, L.-M., & Lou, X. W. (2016) · Nature Communications · doi:10.1038/ncomms13065 · Cited by 677
Huang, J.-Q., Zhang, Q., & Wei, F. (2015) · Energy Storage Materials · doi:10.1016/j.ensm.2015.09.008 · Cited by 665
A High‐Energy Room‐Temperature Sodium‐Sulfur Battery
Xin, S., Yin, Y., Guo, Y., & Wan, L. (2014) · Advanced Materials · doi:10.1002/adma.201304126 · Cited by 632
Self-citationCurrent Status and Future Prospects of Metal–Sulfur Batteries
Chung, S., & Manthiram, A. (2019) · Advanced Materials · doi:10.1002/adma.201901125 · Cited by 622
Seh, Z. W., Yu, J. H., Li, W., Hsu, P.-C., Wang, H., Sun, Y., Yao, H., Zhang, Q., & Cui, Y. (2014) · Nature Communications · doi:10.1038/ncomms6017 · Cited by 600
Lithium salts for advanced lithium batteries: Li–metal, Li–O2, and Li–S
Younesi, R., Veith, G. M., Johansson, P., Edström, K., & Vegge, T. (2015) · Energy & Environmental Science · doi:10.1039/c5ee01215e · Cited by 600
Carbon materials for Li–S batteries: Functional evolution and performance improvement
Liang, J., Sun, Z.-H., Li, F., & Cheng, H.-M. (2016) · Energy Storage Materials · doi:10.1016/j.ensm.2015.09.007 · Cited by 593
Metal–Sulfur Battery Cathodes Based on PAN–Sulfur Composites
Wei, S., Ma, L., Hendrickson, K. E., Tu, Z., & Archer, L. A. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b08113 · Cited by 579
Pang, Q., Shyamsunder, A., Narayanan, B., Kwok, C. Y., Curtiss, L. A., & Nazar, L. F. (2018) · Nature Energy · doi:10.1038/s41560-018-0214-0 · Cited by 573
He, J., Chen, Y., & Manthiram, A. (2018) · Energy & Environmental Science · doi:10.1039/c8ee00893k · Cited by 565
Song, J., Yu, Z., Gordin, M. L., & Wang, D. (2016) · Nano Letters · doi:10.1021/acs.nanolett.5b03217 · Cited by 561
Pei, F., An, T., Zang, J., Zhao, X., Fang, X., Zheng, M., Dong, Q., & Zheng, N. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502539 · Cited by 555
Peng, H., Huang, J., Zhao, M., Zhang, Q., Cheng, X., Liu, X., Qian, W., & Wei, F. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201303296 · Cited by 552
Li, W., Hu, S., Luo, X., Li, Z., Sun, X., Li, M., Liu, F., & Yu, Y. (2017) · Advanced Materials · doi:10.1002/adma.201605820 · Cited by 536
Mao, Y., Li, G., Guo, Y., Li, Z., Liang, C., Peng, X., & Lin, Z. (2017) · Nature Communications · doi:10.1038/ncomms14628 · Cited by 518
Self-citationProgress in Mechanistic Understanding and Characterization Techniques of Li‐S Batteries
Xu, R., Lu, J., & Amine, K. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500408 · Cited by 507
Anodes for Rechargeable Lithium‐Sulfur Batteries
Cao, R., Xu, W., Lv, D., Xiao, J., & Zhang, J. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201402273 · Cited by 502
Li, Z., Yuan, L., Yi, Z., Sun, Y., Liu, Y., Jiang, Y., Shen, Y., Xin, Y., Zhang, Z., & Huang, Y. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201301473 · Cited by 481
From lithium to sodium: Cell chemistry of room temperature sodium–air and sodium–sulfur batteries
Adelhelm, P., Hartmann, P., Bender, C. L., Busche, M., Eufinger, C., & Janek, J. (2015) · Beilstein Journal of Nanotechnology · doi:10.3762/bjnano.6.105 · Cited by 478
Carbon nanomaterials for advanced lithium sulfur batteries
Xu, Z.-L., Kim, J.-K., & Kang, K. (2018) · Nano Today · doi:10.1016/j.nantod.2018.02.006 · Cited by 454
Ye, H., Xin, S., Yin, Y.-X., Li, J.-Y., Guo, Y.-G., & Wan, L.-J. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b01763 · Cited by 451
Self-citationHwang, T. H., Jung, D. S., Kim, J.-S., Kim, B. G., & Choi, J. W. (2013) · Nano Letters · doi:10.1021/nl402513x · Cited by 441
Recent advances in shuttle effect inhibition for lithium sulfur batteries
Ren, W., Ma, W., Zhang, S., & Tang, B. (2019) · Energy Storage Materials · doi:10.1016/j.ensm.2019.02.022 · Cited by 434
Rational Design of Nanostructured Functional Interlayer/Separator for Advanced Li–S Batteries
Jeong, Y. C., Kim, J. H., Nam, S., Park, C. R., & Yang, S. J. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201707411 · Cited by 429
Kim, H., Lee, J., Ahn, H., Kim, O., & Park, M. J. (2015) · Nature Communications · doi:10.1038/ncomms8278 · Cited by 428
A Comprehensive Understanding of Lithium–Sulfur Battery Technology
Li, T., Bai, X., Gulzar, U., Bai, Y., Capiglia, C., Deng, W., Zhou, X., Liu, Z., Feng, Z., & Proietti Zaccaria, R. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201901730 · Cited by 422
Recent Advances in Hollow Porous Carbon Materials for Lithium–Sulfur Batteries
Fu, A., Wang, C., Pei, F., Cui, J., Fang, X., & Zheng, N. (2019) · Small · doi:10.1002/smll.201804786 · Cited by 417
Xiong, S., Xie, K., Diao, Y., & Hong, X. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.08.041 · Cited by 414
Carbon Materials for Lithium Sulfur Batteries—Ten Critical Questions
Borchardt, L., Oschatz, M., & Kaskel, S. (2016) · Chemistry – A European Journal · doi:10.1002/chem.201600040 · Cited by 414
Structural Design of Lithium–Sulfur Batteries: From Fundamental Research to Practical Application
Yang, X., Li, X., Adair, K., Zhang, H., & Sun, X. (2018) · Electrochemical Energy Reviews · doi:10.1007/s41918-018-0010-3 · Cited by 411
Li-S Batteries: Challenges, Achievements and Opportunities
Raza, H., Bai, S., Cheng, J., Majumder, S., Zhu, H., Liu, Q., Zheng, G., Li, X., & Chen, G. (2023) · Electrochemical Energy Reviews · doi:10.1007/s41918-023-00188-4 · Cited by 406
Cheng, X.-B., Huang, J.-Q., Zhang, Q., Peng, H.-J., Zhao, M.-Q., & Wei, F. (2014) · Nano Energy · doi:10.1016/j.nanoen.2013.12.013 · Cited by 403
Yang, X., Zhang, L., Zhang, F., Huang, Y., & Chen, Y. (2014) · ACS Nano · doi:10.1021/nn501284q · Cited by 396
Peng, H., Hou, T., Zhang, Q., Huang, J., Cheng, X., Guo, M., Yuan, Z., He, L., & Wei, F. (2014) · Advanced Materials Interfaces · doi:10.1002/admi.201400227 · Cited by 393
High-Performance Li–S Batteries with an Ultra-lightweight MWCNT-Coated Separator
Chung, S.-H., & Manthiram, A. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz5006913 · Cited by 393
Xu, Z.-L., Lin, S., Onofrio, N., Zhou, L., Shi, F., Lu, W., Kang, K., Zhang, Q., & Lau, S. P. (2018) · Nature Communications · doi:10.1038/s41467-018-06629-9 · Cited by 391
Self-citationEmbedding Sulfur in MOF‐Derived Microporous Carbon Polyhedrons for Lithium–Sulfur Batteries
Wu, H. B., Wei, S., Zhang, L., Xu, R., Hng, H. H., & Lou, X. W. (. (2013) · Chemistry – A European Journal · doi:10.1002/chem.201301689 · Cited by 386
Tu, S., Zhang, B., Zhang, Y., Chen, Z., Wang, X., Zhan, R., Ou, Y., Wang, W., Liu, X., Duan, X., et al. (2023) · Nature Energy · doi:10.1038/s41560-023-01387-5 · Cited by 382
Carbonized Eggshell Membrane as a Natural Polysulfide Reservoir for Highly Reversible Li‐S Batteries
Chung, S., & Manthiram, A. (2014) · Advanced Materials · doi:10.1002/adma.201304365 · Cited by 375
Solid-State Lithium Metal Batteries Promoted by Nanotechnology: Progress and Prospects
Xin, S., You, Y., Wang, S., Gao, H.-C., Yin, Y.-X., & Guo, Y.-G. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00175 · Cited by 366
Self-citationChung, S., & Manthiram, A. (2014) · Advanced Materials · doi:10.1002/adma.201402893 · Cited by 364
Encapsulated Monoclinic Sulfur for Stable Cycling of Li–S Rechargeable Batteries
Moon, S., Jung, Y. H., Jung, W. K., Jung, D. S., Choi, J. W., & Kim, D. K. (2013) · Advanced Materials · doi:10.1002/adma.201303166 · Cited by 354
Wang, Y., Zhang, B., Lai, W., Xu, Y., Chou, S., Liu, H., & Dou, S. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602829 · Cited by 349
A Revolution in Electrodes: Recent Progress in Rechargeable Lithium–Sulfur Batteries
Fang, X., & Peng, H. (2015) · Small · doi:10.1002/smll.201402354 · Cited by 346
Understanding Conversion-Type Electrodes for Lithium Rechargeable Batteries
Yu, S.-H., Feng, X., Zhang, N., Seok, J., & Abruña, H. D. (2018) · Accounts of Chemical Research · doi:10.1021/acs.accounts.7b00487 · Cited by 334
Chen, X., Peng, L., Wang, L., Yang, J., Hao, Z., Xiang, J., Yuan, K., Huang, Y., Shan, B., Yuan, L., et al. (2019) · Nature Communications · doi:10.1038/s41467-019-08818-6 · Cited by 328
Pang, Q., Liang, X., Kwok, C. Y., & Nazar, L. F. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0171514jes · Cited by 323
Design of Complex Nanomaterials for Energy Storage: Past Success and Future Opportunity
Liu, Y., Zhou, G., Liu, K., & Cui, Y. (2017) · Accounts of Chemical Research · doi:10.1021/acs.accounts.7b00450 · Cited by 323
Interface engineering toward stable lithium–sulfur batteries
Guo, Y., Niu, Q., Pei, F., Wang, Q., Zhang, Y., Du, L., Zhang, Y., Zhang, Y., Zhang, Y., Fan, L., et al. (2024) · Energy & Environmental Science · doi:10.1039/d3ee04183b · Cited by 322
Self-citationXu, J., Ma, J., Fan, Q., Guo, S., & Dou, S. (2017) · Advanced Materials · doi:10.1002/adma.201606454 · Cited by 319
Tu, S., Chen, X., Zhao, X., Cheng, M., Xiong, P., He, Y., Zhang, Q., & Xu, Y. (2018) · Advanced Materials · doi:10.1002/adma.201804581 · Cited by 319
Zhou, F., Li, Z., Luo, X., Wu, T., Jiang, B., Lu, L.-L., Yao, H.-B., Antonietti, M., & Yu, S.-H. (2018) · Nano Letters · doi:10.1021/acs.nanolett.7b04505 · Cited by 316
Confined Sulfur in Microporous Carbon Renders Superior Cycling Stability in Li/S Batteries
Xu, Y., Wen, Y., Zhu, Y., Gaskell, K., Cychosz, K. A., Eichhorn, B., Xu, K., & Wang, C. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201500983 · Cited by 311
Ding, Y., Kopold, P., Hahn, K., van Aken, P. A., Maier, J., & Yu, Y. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201504294 · Cited by 310
Insight into the Effect of Boron Doping on Sulfur/Carbon Cathode in Lithium–Sulfur Batteries
Yang, C.-P., Yin, Y.-X., Ye, H., Jiang, K.-C., Zhang, J., & Guo, Y.-G. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am501627f · Cited by 310
Self-citationHigh performance lithium–sulfur batteries: advances and challenges
Xu, G., Ding, B., Pan, J., Nie, P., Shen, L., & Zhang, X. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta02097a · Cited by 297
Nanostructured positive electrode materials for post-lithium ion batteries
Wang, F., Wu, X., Li, C., Zhu, Y., Fu, L., Wu, Y., & Liu, X. (2016) · Energy & Environmental Science · doi:10.1039/c6ee02070d · Cited by 293
Zhang, J., Xiang, J., Dong, Z., Liu, Y., Wu, Y., Xu, C., & Du, G. (2014) · Electrochimica Acta · doi:10.1016/j.electacta.2013.11.035 · Cited by 288
Cathode materials for lithium–sulfur batteries: a practical perspective
Eftekhari, A., & Kim, D.-W. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta00799j · Cited by 285
Confined selenium within porous carbon nanospheres as cathode for advanced Li–Se batteries
Li, Z., Yuan, L., Yi, Z., Liu, Y., & Huang, Y. (2014) · Nano Energy · doi:10.1016/j.nanoen.2014.07.012 · Cited by 284
Durable Carbon-Coated Li2S Core–Shell Spheres for High Performance Lithium/Sulfur Cells
Nan, C., Lin, Z., Liao, H., Song, M.-K., Li, Y., & Cairns, E. J. (2014) · Journal of the American Chemical Society · doi:10.1021/ja412943h · Cited by 282
The 2021 battery technology roadmap
Ma, J., Li, Y., Grundish, N. S., Goodenough, J. B., Chen, Y., Guo, L., Peng, Z., Qi, X., Yang, F., Qie, L., et al. (2021) · Journal of Physics D: Applied Physics · doi:10.1088/1361-6463/abd353 · Cited by 269
Self-citationExploring and Understanding the Roles of Li2Sn and the Strategies to beyond Present Li-S Batteries
Lei, J., Liu, T., Chen, J., Zheng, M., Zhang, Q., Mao, B., & Dong, Q. (2020) · Chem · doi:10.1016/j.chempr.2020.06.032 · Cited by 268
Engineering Strategies for Suppressing the Shuttle Effect in Lithium–Sulfur Batteries
Li, J., Gao, L., Pan, F., Gong, C., Sun, L., Gao, H., Zhang, J., Zhao, Y., Wang, G., & Liu, H. (2024) · Nano-Micro Letters · doi:10.1007/s40820-023-01223-1 · Cited by 267
Toward a molecular design of porous carbon materials
Borchardt, L., Zhu, Q.-L., Casco, M. E., Berger, R., Zhuang, X., Kaskel, S., Feng, X., & Xu, Q. (2017) · Materials Today · doi:10.1016/j.mattod.2017.06.002 · Cited by 266
Sun, Q., He, B., Zhang, X.-Q., & Lu, A.-H. (2015) · ACS Nano · doi:10.1021/acsnano.5b03488 · Cited by 265
A zero-strain insertion cathode material of nickel ferricyanide for sodium-ion batteries
You, Y., Wu, X.-L., Yin, Y.-X., & Guo, Y.-G. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta13223d · Cited by 265
Self-citationTernary Hybrid Material for High-Performance Lithium–Sulfur Battery
Fan, Q., Liu, W., Weng, Z., Sun, Y., & Wang, H. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b07071 · Cited by 264
Elemental Selenium for Electrochemical Energy Storage
Yang, C.-P., Yin, Y.-X., & Guo, Y.-G. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/jz502405h · Cited by 263
Self-citationYoo, J., Cho, S.-J., Jung, G. Y., Kim, S. H., Choi, K.-H., Kim, J.-H., Lee, C. K., Kwak, S. K., & Lee, S.-Y. (2016) · Nano Letters · doi:10.1021/acs.nanolett.6b00870 · Cited by 255
Metadata
- Authors
- Xin, S., Gu, L., Zhao, N.-H., Yin, Y.-X., Zhou, L.-J., Guo, Y.-G., & Wan, L.-J.
- Venue
- Journal of the American Chemical Society
- Publisher
- American Chemical Society (ACS)
- Published
- 2012-10-31
- Volume
- 134
- Issue
- 45
- Pages
- 18510-18513
- ISSN
- 0002-7863 (ISSN-L)
- 1520-5126
- OpenAlex
- W2009860903
- Cited by
- 1,644
- References
- 33
- FWCI
- 70.81
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.