Engineered doping of organic semiconductors for enhanced thermoelectric efficiency
The DOI matches its Crossref record; 16 of the 16 references it cites were found in a registry or an index.
Abstract
Significant improvements to the thermoelectric figure of merit ZT have emerged in recent years, primarily due to the engineering of material composition and nanostructure in inorganic semiconductors (ISCs). However, many present high-ZT materials are based on low-abundance elements that pose challenges for scale-up, as they entail high material costs in addition to brittleness and difficulty in large-area deposition. Here we demonstrate a strategy to improve ZT in conductive polymers and other organic semiconductors (OSCs) for which the base elements are earth-abundant. By minimizing total dopant volume, we show that all three parameters constituting ZT vary in a manner so that ZT increases; this stands in sharp contrast to ISCs, for which these parameters have trade-offs. Reducing dopant volume is found to be as important as optimizing carrier concentration when maximizing ZT in OSCs. Implementing this strategy with the dopant poly(styrenesulphonate) in poly(3,4-ethylenedioxythiophene), we achieve ZT = 0.42 at room temperature.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Various soft conductive materials such as thin metal,[106] conductive polymers,[508] nanomaterials,[509] etc. can be thermally actuated in the form of resistors.”
From Flexible Electronics and Devices as Human–Machine Interfaces for Medical Robotics (2022) · cites this paper as [508]
Citations
Cites
Cooling, Heating, Generating Power, and Recovering Waste Heat with Thermoelectric Systems
Bell, L. E. (2008) · Science · doi:10.1126/science.1158899 · Cited by 6,082
Bubnova, O., Khan, Z. U., Malti, A., Braun, S., Fahlman, M., Berggren, M., & Crispin, X. (2011) · Nature Materials · doi:10.1038/nmat3012 · Cited by 1,769
Kim, Y. H., Sachse, C., Machala, M. L., May, C., Müller‐Meskamp, L., & Leo, K. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201002290 · Cited by 1,458
Xia, Y., Sun, K., & Ouyang, J. (2012) · Advanced Materials · doi:10.1002/adma.201104795 · Cited by 1,124
PEDOT: Principles and Applications of an Intrinsically Conductive Polymer
Elschner, A., Kirchmeyer, S., Lovenich, W., Merker, U., & Reuter, K. (2010) · CRC Press eBooks · doi:10.1201/b10318 · Cited by 758
Microscopic Understanding of the Anisotropic Conductivity of PEDOT:PSS Thin Films
Nardes, A. M., Kemerink, M., Janssen, R. A. J., Bastiaansen, J. A. M., Kiggen, N. M. M., Langeveld, B. M. W., van Breemen, A. J. J. M., & de Kok, M. M. (2007) · Advanced Materials · doi:10.1002/adma.200602575 · Cited by 539
Zhang, B., Sun, J., Katz, H. E., Fang, F., & Opila, R. L. (2010) · ACS Applied Materials & Interfaces · doi:10.1021/am100654p · Cited by 480
Microscopical Investigations of PEDOT:PSS Thin Films
Lang, U., Müller, E., Naujoks, N., & Dual, J. (2009) · Advanced Functional Materials · doi:10.1002/adfm.200801258 · Cited by 457
Poly(3,4-ethylenedioxythiophene) as promising organic thermoelectric materials: A mini-review
Yue, R., & Xu, J. (2012) · Synthetic Metals · doi:10.1016/j.synthmet.2012.04.005 · Cited by 275
Koh, Y. K., Singer, S. L., Kim, W., Zide, J. M. O., Lu, H., Cahill, D. G., Majumdar, A., & Gossard, A. C. (2009) · Journal of Applied Physics · doi:10.1063/1.3078808 · Cited by 205
Cited by
Items 901–1,000 of 1,000
Li, M., Xiong, Y., Wei, H., Yao, F., Han, Y., Du, Y., & Xu, D. (2023) · Nanoscale · doi:10.1039/d3nr01516e · Cited by 23
Wang, H., Lin, X., Han, G., Zhang, B., Chen, Y., Zhang, L., Lu, X., Wang, G., & Zhou, X. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202413605 · Cited by 23
Doping effects on the thermoelectric properties of pristine poly(3,4-ethylenedioxythiophene)
Zhang, B., Wang, K., Li, D., & Cui, X. (2015) · RSC Advances · doi:10.1039/c4ra16451b · Cited by 24
Thermoelectric power of oriented thin-film organic conductors
Sato, R., Kiyota, Y., Kadoya, T., Kawamoto, T., & Mori, T. (2016) · RSC Advances · doi:10.1039/c6ra04455g · Cited by 23
Chen, L., Liu, W., Su, X., Xiao, S., Xie, H., Uher, C., & Tang, X. (2017) · Synthetic Metals · doi:10.1016/j.synthmet.2017.05.010 · Cited by 23
Preparation and Thermoelectric Properties of Graphite/poly(3,4-ethyenedioxythiophene) Nanocomposites
Du, Y., Li, H., Jia, X., Dou, Y., Xu, J., & Eklund, P. (2018) · Energies · doi:10.3390/en11102849 · Cited by 23
“Although the ZT value (the thermoelectric figure of merit ZT = S2σT/k, where T, S, σ, and k are absolute temperature, Seebeck coefficient, electrical conductivity, and thermal conductivity, respectively [5]) of PEDOT and its derivatives have been significantly enhanced [14,15], it is still much lower than that of typi…”
BackgroundSolution-Based Synthesis and Processing of Metal Chalcogenides for Thermoelectric Applications
Shah, K. W., Wang, S., Zheng, Y., & Xu, J. (2019) · Applied Sciences · doi:10.3390/app9071511 · Cited by 23
Meters-long, sewable, wearable conductive polymer wires for thermoelectric applications
Ge, R., Dong, X., Sun, L., Hu, L., Liu, T., Zeng, W., Luo, B., Jiang, X., Jiang, Y., & Zhou, Y. (2020) · Journal of Materials Chemistry C · doi:10.1039/c9tc06079k · Cited by 23
Zheng, W., Lu, Y. L., Li, Y., Wang, J., Hou, Z., & Shao, X. (2020) · Chemical Physics Letters · doi:10.1016/j.cplett.2019.137055 · Cited by 23
Chen, Z., Tang, Y., Lin, B., Zhao, H., Li, T., Min, T., Yan, H., & Ma, W. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c06127 · Cited by 23
Recent Progress on Addressing the Key Challenges in Organic Thermoelectrics
Li, J., & Lei, T. (2021) · Chemistry - An Asian Journal · doi:10.1002/asia.202100285 · Cited by 23
Wu, J., Yin, X., Yang, F., Wang, S., Liu, Y., Mao, X., Nie, X., Yang, S., Gao, C., & Wang, L. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.132354 · Cited by 23
Recent progress on two-dimensional van der Waals thermoelectric materials with plasticity
Yin, S., Zhao, C., Zhang, B., Zhao, W., Zhang, C., & Li, L. (2024) · Journal of Materiomics · doi:10.1016/j.jmat.2024.02.010 · Cited by 22
Enhanced thermoelectric performance of PEDOT:PSS films by solvent thermal treatment
Liu, E., Liu, C., Zhu, Z., Shi, H., Jiang, Q., Jiang, F., Xu, J., Xiong, J., & Hu, Y. (2015) · Journal of Polymer Research · doi:10.1007/s10965-015-0883-3 · Cited by 22
“Recently, poly (3,4-ethylenedioxythiophene):poly (styrenesulfonate) (PEDOT:PSS) with excellent filmforming property, good environmental stability, easy processing into versatile forms has become a research hotspot [2–5].”
BackgroundCao, X., Zhou, W., Chen, C., Tang, L., Long, M., & Chen, K. (2017) · Scientific Reports · doi:10.1038/s41598-017-11224-x · Cited by 22
“The k-point sampling is (1, 1, 100) at the x, y, z direction, and the cutoff energy is set to 150 Ry.”
Recent advances in flexible thermoelectrics
Shang, H., Gu, H., Ding, F., & Ren, Z. (2021) · Applied Physics Letters · doi:10.1063/5.0049451 · Cited by 22
Controllable anisotropic thermoelectric properties in 2D covalent organic radical frameworks
Cao, X., Wu, D., Zeng, J., Luo, N., Zhou, W., Tang, L., & Chen, K. (2021) · Applied Physics Letters · doi:10.1063/5.0073403 · Cited by 22
A Review of Key Properties of Thermoelectric Composites of Polymers and Inorganic Materials
Wood, N. D., Gillie, L. J., Cooke, D. J., & Molinari, M. (2022) · Materials · doi:10.3390/ma15238672 · Cited by 23
“N PVAc (98 wt. %)/CQD [145] 298 30.3 71 15.2 ~0.88 5 × 10−3 - PEDOT:PSS (50 wt. %)/GTNC [146] 300 ~890 ~10 ~8 - - PTh PANI (50 wt. %)/rGO [147] 298 ~18 32.64 2 ~0.13 4.6 × 10−3 N PEDOT:PSS (85 wt. %/GQDs [148] 298 71.2 14.6 ~1.7 - PTh PVAc (60 wt. %)/SWCNT [149] 300 ~900 ~40 ~1.44 ~0.25 - - PVAc (5 wt. %)/Gr [150] 300…”
InfluentialKim, Y., Choi, H., Lee, J., Jung, Y., Jung, J., Cho, J., Lee, T., & Kang, K. (2023) · EcoMat · doi:10.1002/eom2.12406 · Cited by 24
Yang, X., Ye, G., Tran, K., Liu, Y., Cao, J., Dong, J., Portale, G., Liu, J., Zhang, P., Loi, M. A., et al. (2024) · ACS Materials Letters · doi:10.1021/acsmaterialslett.4c00068 · Cited by 22
Sarabia‐Riquelme, R., Ramos‐Fernandez, G., Martı́n-Gullón, I., & Weisenberger, M. C. (2016) · Synthetic Metals · doi:10.1016/j.synthmet.2016.11.013 · Cited by 22
Optoelectronic Evaluation and Loss Analysis of PEDOT:PSS/Si Hybrid Heterojunction Solar Cells
Yang, Z., Fang, Z., Sheng, J., Ling, Z., Liu, Z., Zhu, J., Gao, P., & Ye, J. (2017) · Nanoscale Research Letters · doi:10.1186/s11671-016-1790-1 · Cited by 22
Effects of solvents on thermoelectric performance of PANi/PEDOT/PSS composite films
Jiang, F., Wang, L., Li, C., Wang, X., Hu, Y., Liu, H., Yang, H., Zhao, F. Q., & Xu, J. (2017) · Journal of Polymer Research · doi:10.1007/s10965-017-1226-3 · Cited by 22
Jagadish, P. R., Khalid, M., Amin, N., Lau, P. L., & Chan, A. (2017) · Journal of Materials Science · doi:10.1007/s10853-017-1284-2 · Cited by 22
“Flexible TEGs have been fabricated in the past using inorganic materials such as Bi2Te3 and Sb2Te3 on flexible substrates [2–4] or by using flexible polymeric materials such as poly(3,4-ethylenedioxythiophene) (PEDOT) [5, 6] and polydimethyl siloxane (PDMS) [7].”
MethodShape-Deformable Thermoelectric Carbon Nanotube Doughs
Park, S., Mo, J.-H., Kim, S., Hwang, H., & Jang, K. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c00617 · Cited by 22
Evolving conductive polymer neural networks on wetware
Akai‐Kasaya, M., Hagiwara, N., Hikita, W., Okada, M., Sugito, Y., Kuwahara, Y., & Asai, T. (2020) · Japanese Journal of Applied Physics · doi:10.35848/1347-4065/ab8e06 · Cited by 23
Du, Y., Chen, J., Meng, Q., Xu, J., Lu, J., Paul, B., & Eklund, P. (2020) · Advanced Electronic Materials · doi:10.1002/aelm.202000214 · Cited by 22
Imae, I., Ogino, R., Tsuboi, Y., Goto, T., Komaguchi, K., & Harima, Y. (2015) · RSC Advances · doi:10.1039/c5ra17235g · Cited by 22
Zn Anode‐Based Electrochromic Devices: Progress & Challenges
Huang, B., Zhao, F., Liu, P., Xu, Y., Wang, B., Yang, J., Chen, J., Li, H., & Yu, W. W. (2025) · Energy & environment materials · doi:10.1002/eem2.70102 · Cited by 23
Konabe, S., & Yamamoto, T. (2014) · Applied Physics Express · doi:10.7567/apex.8.015202 · Cited by 21
Jo, J., Oh, I., Jin, M., Park, J., Son, J. S., An, K., & Yoo, J. (2017) · Organic Electronics · doi:10.1016/j.orgel.2017.08.013 · Cited by 21
Jia, Y., Liu, C., Liu, J., Liu, C., Xu, J., Li, X., Shen, L., Jiang, Q., Wang, X., Yang, J. C., et al. (2019) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.24778 · Cited by 21
Electrochemical doping tuning of flexible polypyrrole film with enhanced thermoelectric performance
Li, M., Luo, C., Zhang, J., Yang, J., Xu, J., Yao, W., Tan, R., Duan, X., & Jiang, F. (2020) · Surfaces and Interfaces · doi:10.1016/j.surfin.2020.100759 · Cited by 21
Boosting the performance of printed thermoelectric materials by inducing morphological anisotropy
Tian, Y., & Molina‐Lopez, F. (2021) · Nanoscale · doi:10.1039/d0nr08144b · Cited by 21
Organic Thermoelectric Materials as the Waste Heat Remedy
Gogoc, S., & Data, P. (2022) · Molecules · doi:10.3390/molecules27031016 · Cited by 21
Guo, L., & Wang, H. (2022) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2022.112340 · Cited by 22
Nie, X., Xue, J. Q., Zhao, L., Deng, S., & Xiong, H. (2024) · Energy · doi:10.1016/j.energy.2024.130553 · Cited by 23
Thermoelectric supercapacitors: materials, challenges and future outlook
Verma, S., Padha, B., Ahmed, A., Singh, R. K., Dubal, D. P., & Arya, S. K. (2024) · Progress in Energy · doi:10.1088/2516-1083/ad6be3 · Cited by 21
“Despite significant progress, the Seebeck coefficient of p-type organic TEs at their improved Z T is still less [67], whereas the ratio of electrical and thermal conductivities is comparable to Bi 2 Te 3 [68].”
Wang, Y., Zhang, S., & Deng, Y. (2015) · Materials Letters · doi:10.1016/j.matlet.2015.10.138 · Cited by 21
Thermal diffusivities of functionalized pentacene semiconductors
Zhang, H., Yao, Y., Payne, M. M., Anthony, J. E., & Brill, J. W. (2014) · Applied Physics Letters · doi:10.1063/1.4894094 · Cited by 21
Revealing the anisotropy in thermoelectric transport performances in CNT/PANI composites
Chen, J., Wang, L., Ren, D., Chu, Y., Wu, Y., Meng, K., Miao, J., Xu, X., & Jiang, Y. (2018) · Synthetic Metals · doi:10.1016/j.synthmet.2018.03.004 · Cited by 21
Du, F., Li, Q., Fu, P., Zhang, Y., & Wu, Y. (2018) · Journal of Materials Science Materials in Electronics · doi:10.1007/s10854-018-8882-x · Cited by 21
Bharti, M., Singh, A., Samanta, S., Debnath, A. K., Marumoto, K., Aswal, D. K., Muthe, K. P., & Gadkari, S. C. (2018) · Vacuum · doi:10.1016/j.vacuum.2018.04.017 · Cited by 21
Wang, Y., Yu, C., Liu, G., Sheng, M., & Deng, Y. (2018) · Materials Letters · doi:10.1016/j.matlet.2018.07.042 · Cited by 21
Chen, L., Liu, W., Yan, Y., Su, X., Xiao, S., Lu, X., Uher, C., & Tang, X. (2019) · Journal of Materials Chemistry C · doi:10.1039/c8tc05938a · Cited by 21
Review of photoreduction and synchronous patterning of graphene oxide toward advanced applications
Jiang, H., Zhao, B., Liu, Y., Li, S., Liu, J., Song, Y. Z., Wang, D., Xin, W., & Ren, L. (2019) · Journal of Materials Science · doi:10.1007/s10853-019-03981-z · Cited by 21
“[92] Kim G, Shao L, Zhang K (2013) Engineered doping of organic semiconductors for enhanced thermoelectric effi-”
BackgroundStudy of conductive polymer PEDOT: PSS for infrared thermal detection
Li, J., Li, Z. H., Wang, J., & Chen, X. (2019) · Optical Materials Express · doi:10.1364/ome.9.004474 · Cited by 21
Song, C., Zhang, H., Jin, L., Ma, X., Zou, Y., Shi, L., & Xu, Y. (2020) · Advanced Optical Materials · doi:10.1002/adom.201901618 · Cited by 21
Salt doping to improve thermoelectric power factor of organic nanocomposite thin films
Stevens, D. L., Gamage, G. A., Ren, Z., & Grunlan, J. C. (2020) · RSC Advances · doi:10.1039/d0ra00763c · Cited by 21
Xing, G., Li, Y., Feng, Z., Singh, D. J., & Pauly, F. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c17148 · Cited by 21
Jeong, H. J., Jang, H., Kim, T., Earmme, T., & Kim, F. S. (2021) · Materials · doi:10.3390/ma14081975 · Cited by 21
Ruan, L., Zhao, H., Li, D., Jin, S., Li, S., Gu, L., & Liang, J. (2016) · Journal of Electronic Materials · doi:10.1007/s11664-016-4334-7 · Cited by 21
Polyaniline − carbon nanohorn composites as thermoelectric materials
Famengo, A., Ferrario, A., Boldrini, S., Battiston, S., Fiameni, S., Pagura, C., & Fabrizio, M. (2017) · Polymer International · doi:10.1002/pi.5366 · Cited by 21
Linking morphology to thermal conductivity in PEDOT: an atomistic investigation
Genovese, C., Antidormi, A., Dettori, R., Caddeo, C., Mattoni, A., Colombo, L., & Melis, C. (2017) · Journal of Physics D Applied Physics · doi:10.1088/1361-6463/aa9467 · Cited by 21
Enhanced Thermoelectric Properties for PEDOT:PSS/Undoped Ge Thin‐Film Bilayered Heterostructures
Lee, D., Zhou, J., Chen, G., & Shao‐Horn, Y. (2018) · Advanced Electronic Materials · doi:10.1002/aelm.201800624 · Cited by 21
Kluge, R. M., Saxena, N., Chen, W., Körstgens, V., Schwartzkopf, M., Zhong, Q., Roth, S. V., & Müller‐Buschbaum, P. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202003092 · Cited by 21
Polymer thermoelectric devices prepared by thermal lamination
Mukaida, M., Wei, Q., & Ishida, T. (2016) · Synthetic Metals · doi:10.1016/j.synthmet.2016.11.016 · Cited by 20
A novel investigation on ZnO nanostructures on carbon fabric for harvesting thermopower on textile
Veluswamy, P., Sathiyamoorthy, S., Gomathi, P., Jayabal, K., Kumar, R., Кузнецов, Д., & Ikeda, H. (2019) · Applied Surface Science · doi:10.1016/j.apsusc.2019.143658 · Cited by 20
Shi, W. Y., Wong, Z. M., Deng, T., Wu, G., & Yang, S. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202007438 · Cited by 20
Duan, J., Ding, J., Wang, D., Zhu, X., Chen, J., Zhu, G., Chen, C., Yu, Y., Liao, H., Li, Z., et al. (2022) · Advanced Science · doi:10.1002/advs.202204872 · Cited by 20
Tezcan, A. O., Oruç, P., Tuğluoğlu, N., & Eymür, S. (2024) · Optical and Quantum Electronics · doi:10.1007/s11082-024-06770-4 · Cited by 20
“…electrical and photoelectric characteristics of the M/S contacts interface can be enhanced by sandwiching the M and S between an insulating or interfacial layer consisting of organic semiconducting compounds (Hu et al. 2012; Kim et al. 2013; Ostroverkhova 2013; Lee et al. 2014; Kim and Lee 2015).”
Zhu, Z., Liu, C., Jiang, Q., Shi, H., Xu, J., Jiang, F., Xiong, J., & Liu, E. (2015) · Synthetic Metals · doi:10.1016/j.synthmet.2015.08.006 · Cited by 20
Zhao, L., Zhao, J., Sun, X., Li, Q., Wu, J., & Zhang, A. (2015) · Synthetic Metals · doi:10.1016/j.synthmet.2015.03.036 · Cited by 20
Tonga, M., Wei, L., Taylor, P., Wilusz, E., Korugic-Karasz, L. S., Karasz, F. E., & Lahti, P. M. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b14695 · Cited by 20
Sezen-Edmonds, M., & Loo, Y. (2017) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.7b01785 · Cited by 20
Wei, K., & Nolas, G. S. (2018) · Scripta Materialia · doi:10.1016/j.scriptamat.2018.03.001 · Cited by 20
Fang, Y., Lang, J., Wang, J., Han, Q., Zhang, Z., Zhang, Q., Yang, J., & Xing, S. G. (2018) · Applied Physics A · doi:10.1007/s00339-018-2044-0 · Cited by 20
Influence of different substrate materials on thermoelectric module with bulk legs
You, H.-J., Chu, H.-S., Li, W., & Lee, W.-L. (2019) · Journal of Power Sources · doi:10.1016/j.jpowsour.2019.227055 · Cited by 21
Xing, W., Chen, J., Liang, Y., Zou, Y., Sun, Y., Xu, W., & Zhu, D. (2019) · RSC Advances · doi:10.1039/c9ra06381a · Cited by 20
Liu, H., Liu, T., Huang, T., Fang, Z., Li, L., Yin, Q., Cao, R., Gong, X., & Liu, T. (2020) · Journal of Materials Chemistry A · doi:10.1039/d0ta03905e · Cited by 20
Wesenberg, D., Roos, M. J., Avery, A. D., Blackburn, J. L., Ferguson, A. J., & Zink, B. L. (2020) · Advanced Electronic Materials · doi:10.1002/aelm.202000746 · Cited by 20
Xu, Z. Q., Cui, Y., Guo, B., Li, H., & Li, H. (2020) · ChemCatChem · doi:10.1002/cctc.202001631 · Cited by 20
Shi, H., Liu, C., Jiang, Q., Xu, J., Lu, B., Jiang, F., & Zhu, Z. (2015) · Nanotechnology · doi:10.1088/0957-4484/26/24/245401 · Cited by 20
“42 was achieved at room temperature [7].”
Oshima, K., Inoue, J., Sadakata, S., Shiraishi, Y., & Toshima, N. (2016) · Journal of Electronic Materials · doi:10.1007/s11664-016-4888-4 · Cited by 20
PPN (poly-peri-naphthalene) film as a narrow-bandgap organic thermoelectric material
Chen, J., Zhang, J., Zou, Y., Xu, W., & Zhu, D. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta02431b · Cited by 20
Stöcker, T., & Moos, R. (2018) · Materials · doi:10.3390/ma11101888 · Cited by 20
Synthesis and Processing of Thermoelectric Nanomaterials, Nanocomposites, and Devices
Tzounis, L. (2019) · Elsevier eBooks · doi:10.1016/b978-0-12-815751-0.00009-2 · Cited by 24
Review of Thermoelectric Materials
Goldsmid, H. J. (2016) · Springer series in materials science · doi:10.1007/978-3-662-49256-7_9 · Cited by 20
Thermoelectric properties of amorphous ZnOxNy thin films at room temperature
Hirose, Y., Tsuchii, M., Shigematsu, K., Kakefuda, Y., Mori, T., & Hasegawa, T. (2019) · Applied Physics Letters · doi:10.1063/1.5089679 · Cited by 19
Lee, H., Li, H., Kim, Y., Park, S. M., Lee, D., Lee, S., Lee, H. S., Kim, Y., & Kang, B. (2022) · Macromolecular Rapid Communications · doi:10.1002/marc.202200277 · Cited by 19
Wu, J., Deng, Y., Wu, Y., & Yan, L. (2023) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2023.170463 · Cited by 19
Quantum‐Dot‐Induced Energy Filtering Effect in Organic Thermoelectric Nanocomposites
Kim, D., Kim, J., Chung, S., & Cho, K. (2024) · Advanced Electronic Materials · doi:10.1002/aelm.202300814 · Cited by 19
Jiang, Q., Liu, C., Zhu, D., Song, H., Xu, J., Shi, H., Mo, D., Wang, Z., & Zhu, Z. (2014) · Journal of Electronic Materials · doi:10.1007/s11664-014-3486-6 · Cited by 19
Increase in thermoelectric power factor of carbon-nanotube films after addition of polystyrene
Suemori, K., Watanabe, Y., & Hoshino, S. (2015) · Organic Electronics · doi:10.1016/j.orgel.2015.10.020 · Cited by 19
Thermal sensor based on a polymer nanofilm
Culebras, M., López, A. M., Gómez, C. M., & Cantarero, A. (2016) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2016.01.010 · Cited by 19
“4 have been attained for poly(3,4 ethylenedioxythiophene) doped with several courter-ions such as: polystyrene sulfonate (PSS) [16], p-toluene sulfonate (Tos) [17], perchlorate or bis(tri uoromethylsulfonyl)imide (BTFMSI) [5].”
BackgroundCaballero‐Calero, O., & D’Agosta, R. (2017) · ECS Journal of Solid State Science and Technology · doi:10.1149/2.0111703jss · Cited by 19
Oshima, K., Sadakata, S., Asano, H., Shiraishi, Y., & Toshima, N. (2017) · Materials · doi:10.3390/ma10070824 · Cited by 19
“A similar enhancement n electr cal conductivity by treatment with a solvent such as DMSO and EG has been reported in th case of PEDOT films, where the solvent treatment was considered to enhance the alignment of the conducting polym r chains [37] and/or o rem ve the insulating mat rials from the surface of the films […”
BackgroundMethodKang, Y. H., Lee, Y.-C., Lee, C., & Cho, S. Y. (2018) · Organic Electronics · doi:10.1016/j.orgel.2018.03.013 · Cited by 19
Neodymium doped zinc oxide for ultersensitive SERS substrate
Gao, M. Y., Yao, J., Quan, Y., Yang, H. J., Huo, P., Dai, J., Yan, Y., & Ma, C. (2019) · Journal of Materials Science Materials in Electronics · doi:10.1007/s10854-019-02416-4 · Cited by 19
Tonga, M., Wei, L., & Lahti, P. M. (2020) · International Journal of Energy Research · doi:10.1002/er.5535 · Cited by 19
Yang, H., Yu, C., Tang, J.-Y., Qiu, J. H., & Zhang, X. (2020) · Acta Mechanica · doi:10.1007/s00707-020-02770-z · Cited by 19
Oechsle, A. L., Heger, J. E., Li, N., Yin, S., Bernstorff, S., & Müller‐Buschbaum, P. (2021) · Macromolecular Rapid Communications · doi:10.1002/marc.202100397 · Cited by 19
Al‐Asbahi, B. A., Abdelkader, M., Alkashef, I. M., Ahmed, A. A. A., Ragab, H. S., & El-Shamy, A. G. (2022) · Materials Science in Semiconductor Processing · doi:10.1016/j.mssp.2022.106678 · Cited by 19
Shi, H., Liu, C., Xu, J., Song, H., Jiang, Q., Lu, B., Zhou, W., & Jiang, F. (2014) · International Journal of Electrochemical Science · doi:10.1016/s1452-3981(23)10993-x · Cited by 19
Park, C., Yoo, D., Lee, J. J., Choi, H. H., & Kim, J. H. (2016) · Organic Electronics · doi:10.1016/j.orgel.2016.05.038 · Cited by 19
6.14 Organic Thermoelectric Composites Materials
Bilotti, E., Fenwick, O., Schroeder, B. C., Baxendale, M., Taroni, P. J., Degousée, T., & Liu, Z. (2017) · Elsevier eBooks · doi:10.1016/b978-0-12-803581-8.10024-4 · Cited by 24
Tu, S., Tian, T., Vagias, A., Huber, L. F., Liu, L., Liang, S., Fischer, R. A., Bernstorff, S., & Müller‐Buschbaum, P. (2023) · Chemical Engineering Journal · doi:10.1016/j.cej.2023.147034 · Cited by 18
Liu, F., Gao, L., Duan, J., Li, F., Li, J., Ge, H., Cai, Z., Li, H., Wang, M., Lv, R., et al. (2024) · Polymers · doi:10.3390/polym16020266 · Cited by 18
“It is worth mentioning that these structural changes are analogous to the results reported in those studies [13].”
ResultYao, G., Chen, Y., Wang, S., Chen, T., Li, S., Song, C., Li, D., Zhang, J., Qin, X., & Xin, H. (2024) · Small · doi:10.1002/smll.202400449 · Cited by 18
Energy conversion and transport in molecular-scale junctions
Zhang, H., Zhu, Y., Duan, P., Shiri, M., Yelishala, S. C., Shen, S., Song, Z., Jia, C., Guo, X., Cui, L., et al. (2024) · Applied Physics Reviews · doi:10.1063/5.0225756 · Cited by 20
Metadata
- Authors
- Kim, G.-H., Shao, L., Zhang, K., & Pipe, K. P.
- Affiliations
- University of Michigan (US)
- Corresponding author
- Pipe, K. P.
- ORCID
- Venue
- Nature Materials
- Published
- 2013-05-05
- Volume
- 12
- Issue
- 8
- Pages
- 719-723
- ISSN
- 1476-1122 (ISSN-L)
- 1476-4660
- OpenAlex
- W2001566902
- Cited by
- 1,688
- References
- 16
- Citations by year
- 2026: 65 · 2025: 90 · 2024: 106 · 2023: 115 · 2022: 120 · 2021: 187 · 2020: 172 · 2019: 178 · 2018: 160 · 2017: 147 · 2016: 155 · 2015: 113 · 2014: 69 · 2013: 11
- FWCI
- 52.38
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.springer.com/tdm (tdm)
- www.springer.com/tdm (vor)
- Locations
- Nature Materials (publishedVersion)
- PubMed (publishedVersion)
- Scholarworks@UNIST (Ulsan National Institute of Science and Technology) (submittedVersion)
- Funders
- U.S. Department of Energy (DESC0000957)
- Basic Energy Sciences
- Energy Frontier Research Centers
- Topics
- Physical Sciences › Materials Science › Materials Chemistry › Advanced Thermoelectric Materials and Devices
- Physical Sciences › Materials Science › Materials Chemistry › Thermal properties of materials
- Physical Sciences › Materials Science › Polymers and Plastics › Conducting polymers and applications
- Keywords
- organic thermoelectrics, organic semiconductors, dopant engineering, figure of merit ZT, PEDOT:PSS, PEDOT, Seebeck coefficient, electrical conductivity, carrier concentration, conducting polymers, nanostructured materials
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.