Engineered doping of organic semiconductors for enhanced thermoelectric efficiency
The DOI matches its Crossref record; 16 of the 16 references it cites were found in a registry or an index.
Abstract
Significant improvements to the thermoelectric figure of merit ZT have emerged in recent years, primarily due to the engineering of material composition and nanostructure in inorganic semiconductors (ISCs). However, many present high-ZT materials are based on low-abundance elements that pose challenges for scale-up, as they entail high material costs in addition to brittleness and difficulty in large-area deposition. Here we demonstrate a strategy to improve ZT in conductive polymers and other organic semiconductors (OSCs) for which the base elements are earth-abundant. By minimizing total dopant volume, we show that all three parameters constituting ZT vary in a manner so that ZT increases; this stands in sharp contrast to ISCs, for which these parameters have trade-offs. Reducing dopant volume is found to be as important as optimizing carrier concentration when maximizing ZT in OSCs. Implementing this strategy with the dopant poly(styrenesulphonate) in poly(3,4-ethylenedioxythiophene), we achieve ZT = 0.42 at room temperature.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Various soft conductive materials such as thin metal,[106] conductive polymers,[508] nanomaterials,[509] etc. can be thermally actuated in the form of resistors.”
From Flexible Electronics and Devices as Human–Machine Interfaces for Medical Robotics (2022) · cites this paper as [508]
Citations
Cites
Cooling, Heating, Generating Power, and Recovering Waste Heat with Thermoelectric Systems
Bell, L. E. (2008) · Science · doi:10.1126/science.1158899 · Cited by 6,082
Bubnova, O., Khan, Z. U., Malti, A., Braun, S., Fahlman, M., Berggren, M., & Crispin, X. (2011) · Nature Materials · doi:10.1038/nmat3012 · Cited by 1,769
Kim, Y. H., Sachse, C., Machala, M. L., May, C., Müller‐Meskamp, L., & Leo, K. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201002290 · Cited by 1,458
Xia, Y., Sun, K., & Ouyang, J. (2012) · Advanced Materials · doi:10.1002/adma.201104795 · Cited by 1,124
PEDOT: Principles and Applications of an Intrinsically Conductive Polymer
Elschner, A., Kirchmeyer, S., Lovenich, W., Merker, U., & Reuter, K. (2010) · CRC Press eBooks · doi:10.1201/b10318 · Cited by 758
Microscopic Understanding of the Anisotropic Conductivity of PEDOT:PSS Thin Films
Nardes, A. M., Kemerink, M., Janssen, R. A. J., Bastiaansen, J. A. M., Kiggen, N. M. M., Langeveld, B. M. W., van Breemen, A. J. J. M., & de Kok, M. M. (2007) · Advanced Materials · doi:10.1002/adma.200602575 · Cited by 539
Zhang, B., Sun, J., Katz, H. E., Fang, F., & Opila, R. L. (2010) · ACS Applied Materials & Interfaces · doi:10.1021/am100654p · Cited by 480
Microscopical Investigations of PEDOT:PSS Thin Films
Lang, U., Müller, E., Naujoks, N., & Dual, J. (2009) · Advanced Functional Materials · doi:10.1002/adfm.200801258 · Cited by 457
Poly(3,4-ethylenedioxythiophene) as promising organic thermoelectric materials: A mini-review
Yue, R., & Xu, J. (2012) · Synthetic Metals · doi:10.1016/j.synthmet.2012.04.005 · Cited by 275
Koh, Y. K., Singer, S. L., Kim, W., Zide, J. M. O., Lu, H., Cahill, D. G., Majumdar, A., & Gossard, A. C. (2009) · Journal of Applied Physics · doi:10.1063/1.3078808 · Cited by 205
Cited by
Items 701–800 of 1,000
Tsuchikawa, R., Lotfizadeh, N., Lahiri, N., Liu, S., Lach, M., Slam, C., Louie, J., & Deshpande, V. V. (2020) · physica status solidi (a) · doi:10.1002/pssa.202000437 · Cited by 35
Zeng, F., Zhao, X., Luo, M., Wang, W., Qing, X., Lü, Y., Zhong, W., Liu, Q., Luo, J., Li, M., et al. (2021) · Composites Science and Technology · doi:10.1016/j.compscitech.2021.109153 · Cited by 35
Liu, W., Lei, Z., Yang, R., Xing, W., Tao, P., Shang, W., Fu, B., Song, C., & Deng, T. (2022) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c19397 · Cited by 35
Huang, J., Liu, X., & Du, Y. (2022) · Journal of Materiomics · doi:10.1016/j.jmat.2022.05.005 · Cited by 35
Artini, C., Pennelli, G., Graziosi, P., Li, Z., Neophytou, N., Melis, C., Colombo, L., Isotta, E., Lohani, K., Scardi, P., et al. (2023) · Nanotechnology · doi:10.1088/1361-6528/acca88 · Cited by 35
Li, Y., Wu, W., Wang, Y., Huang, E., Jeong, S. Y., Woo, H. Y., Guo, X., & Feng, K. (2023) · Angewandte Chemie International Edition · doi:10.1002/anie.202316214 · Cited by 35
Enhanced thermoelectric properties of sorbitol-mixed PEDOT:PSS thin films by chemical reduction
Yang, E., Kim, J., Jung, B. J., & Kwak, J. (2015) · Journal of Materials Science Materials in Electronics · doi:10.1007/s10854-015-2766-0 · Cited by 35
Hossein‐Babaei, F., Akbari, T., & Harkinezhad, B. (2019) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2019.05.018 · Cited by 35
Flexible perovskite light-emitting diodes: Progress, challenges and perspective
Wang, J., Wang, S., Zhou, Y., Lou, Y., & Wang, Z. (2022) · Science China Materials · doi:10.1007/s40843-022-2197-4 · Cited by 34
Xu, Y., Sun, W., Chen, Z., & Ouyang, J. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202410929 · Cited by 34
Incorporating graphene quantum dots boosts thermoelectric performance of PEDOT:PSS films
Wu, T., Shi, X., Deng, Y.-Y., Liu, Y.-M., Zhu, M. H., Liu, W., Li, M., Yue, F., Pei, H., Chen, Z., et al. (2025) · Chemical Engineering Journal · doi:10.1016/j.cej.2025.160219 · Cited by 34
Enhancement of thermoelectric efficiency of doped PCDTBT polymer films
Maiz, J., Rojo, M. M., Mayor, B. A., Wilson, A. A., Nogales, A., Borca‐Tasciuc, D., Borca‐Tasciuc, T., & Martín‐González, M. (2015) · RSC Advances · doi:10.1039/c5ra13452h · Cited by 34
Stöcker, T., Exner, J., Schubert, M., Streibl, M., & Moos, R. (2016) · Materials · doi:10.3390/ma9040227 · Cited by 34
“Whereas thermoelectric materials based on conductive polymers or ceramic-polymer hybrids were investigated for room-temperature applications [12–17], oxides are especially attractive at elevated temperatures due to their chemical and high-temperature stability, with limitations to some special oxide classes like doped…”
BackgroundLee, D., Sayed, S. Y., Lee, S., Kuryak, C. A., Zhou, J., Chen, G., & Shao‐Horn, Y. (2016) · Nanoscale · doi:10.1039/c6nr06950a · Cited by 34
Deng, T., Yong, X., Shi, W. Y., Gan, C. K., Li, W., Hippalgaonkar, K., Zheng, J., Wang, X., Yang, S., Wang, J., et al. (2019) · Advanced Electronic Materials · doi:10.1002/aelm.201800892 · Cited by 34
Rationalizing the enhancement of the thermoelectric properties of PEDOT:PSS by secondary doping
Cassinelli, M., Park, W., Kim, Y., Kim, J. H., Noh, Y., & Caironi, M. (2021) · Applied Physics Letters · doi:10.1063/5.0054477 · Cited by 34
Fu, P., Xiao, J.-K., Gong, J.-Z., Zhu, Y., Yao, J.-A., Zhang, Y., Wang, S., Lin, Z., & Du, F. (2021) · Synthetic Metals · doi:10.1016/j.synthmet.2021.116861 · Cited by 34
Solvent treatment of wet-spinning PEDOT:PSS fiber towards wearable thermoelectric energy harvesting
Pan, Y. “., Song, Y., Jiang, Q., Jia, Y., Liu, P., Song, H., & Liu, G. (2021) · Synthetic Metals · doi:10.1016/j.synthmet.2021.116969 · Cited by 35
Xin, C., Fang, Z., Jiang, S., Hu, Z., Zhang, D., Cassagne, F., Aigouy, L., & Chen, Z. (2023) · Materials Today Energy · doi:10.1016/j.mtener.2023.101266 · Cited by 34
Is there such a thing as a molecular organic alloy?
Huang, X., Liu, X., Ding, K., & Forrest, S. R. (2019) · Materials Horizons · doi:10.1039/c9mh01351b · Cited by 34
Yue, O., Wang, X., Long, X., Bai, Z., Zou, X., & Liu, X. (2024) · Advanced Science · doi:10.1002/advs.202307369 · Cited by 37
Yemata, T. A., Kyaw, A. K. K., Zheng, Y., Xu, J., Chin, W. S., Zhu, Q., & Hayashi, Y. (2025) · Journal of Materials Chemistry A · doi:10.1039/d5ta05957g · Cited by 33
Tomlinson, E. P., Willmore, M. J., Zhu, X., Hilsmier, S. W. A., & Boudouris, B. W. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b05860 · Cited by 33
Banakar, A., Motevali, A., Emad, M., & Ghobadian, B. (2017) · Renewable Energy · doi:10.1016/j.renene.2017.05.052 · Cited by 33
Reversible Protonic Doping in Poly(3,4-Ethylenedioxythiophene)
He, S., Mukaida, M., Kirihara, K., Lyu, L., & Wei, Q. (2018) · Polymers · doi:10.3390/polym10101065 · Cited by 33
Sami, S., Alessandri, R., Broer, R., & Havenith, R. W. A. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c01417 · Cited by 33
Integrating multiple materials science projects in a single neural network
Hatakeyama‐Sato, K., & Oyaizu, K. (2020) · Communications Materials · doi:10.1038/s43246-020-00052-8 · Cited by 33
Organic covalent modification to improve thermoelectric properties of TaS2
Wang, S., Yang, X. P., Hou, L., Cui, X., Zheng, X., & Zheng, J. Y. (2022) · Nature Communications · doi:10.1038/s41467-022-32058-w · Cited by 33
Wang, J., Xie, Z., Lu, G., Liu, J. A., & Yeow, J. T. W. (2023) · Microsystems & Nanoengineering · doi:10.1038/s41378-022-00454-3 · Cited by 36
Ma, S., Anderson, K., Guo, L., Yousuf, A. M., Ellingsworth, E. C., Vajner, C., Wang, H.-T., & Szulczewski, G. (2014) · Applied Physics Letters · doi:10.1063/1.4893740 · Cited by 33
Munusamy, S., Suresh, R., Giribabu, K., Manigandan, R., Kumar, S. P., Selvamani, M., Chandran, B., Stephen, A., Kumar, J. P. N., & Narayanan, V. (2015) · Arabian Journal of Chemistry · doi:10.1016/j.arabjc.2015.10.012 · Cited by 33
Enhanced Thermoelectric Properties of Polyaniline Nanofilms Induced by Self‐Assembled Supramolecules
Wang, L., Yao, Q., Xiao, J., Zeng, K., Shi, W., Qu, S., & Chen, L. (2016) · Chemistry - An Asian Journal · doi:10.1002/asia.201600493 · Cited by 33
Guo, C., Chu, F., Chen, P., Zhu, J., Wang, H., Wang, L., Fan, Y., & Jiang, W. (2018) · Journal of Materials Science · doi:10.1007/s10853-017-1958-9 · Cited by 33
Organic Thermoelectric Materials for Wearable Electronic Devices
Xiao, R., Zhou, X., Zhang, C., Liu, X., Han, S., & Che, C. (2024) · Sensors · doi:10.3390/s24144600 · Cited by 32
A supercell approach to the doping effect on the thermoelectric properties of SnSe
Suzuki, Y., & Nakamura, H. (2015) · Physical Chemistry Chemical Physics · doi:10.1039/c5cp05151g · Cited by 32
Wang, J., Cai, K., Song, H., & Shen, S. (2016) · Synthetic Metals · doi:10.1016/j.synthmet.2016.07.023 · Cited by 32
Data Mining for Three-Dimensional Organic Dirac Materials: Focus on Space Group 19
Geilhufe, R. M., Borysov, S. S., Bouhon, A., & Balatsky, A. V. (2017) · Scientific Reports · doi:10.1038/s41598-017-07374-7 · Cited by 36
Ueno, H., Jeon, I., Lin, H., Thote, A., Nakagawa, T., Okada, H., Izawa, S., Hiramoto, M., Daiguji, H., Maruyama, S., et al. (2019) · Chemical Communications · doi:10.1039/c9cc06120g · Cited by 32
Molecular-scale thermoelectricity: a worst-case scenario
Ismael, A. K., & Lambert, C. J. (2020) · Nanoscale Horizons · doi:10.1039/d0nh00164c · Cited by 32
A review on the development of conjugated polymer-based textile thermoelectric generator
Jangra, V., Maity, S., & Vishnoi, P. (2021) · Journal of Industrial Textiles · doi:10.1177/1528083721996732 · Cited by 32
“Various parameters like different kinds of solvents [70], organic solutions of inorganic salts [71], post-treatment methods [72–74] and temperatures [75] can influence ZT value of PEDOT [67].”
BackgroundMethodMolecular Insights into n-Type Organic Thermoelectrics
Shao, S., & Liu, J. (2021) · CCS Chemistry · doi:10.31635/ccschem.021.202101167 · Cited by 32
Oshima, K., Shiraishi, Y., & Toshima, N. (2015) · Chemistry Letters · doi:10.1246/cl.150328 · Cited by 32
Reasons behind the improved thermoelectric properties of poly(3-hexylthiophene) nanofiber networks
Endrődi, B., Mellár, J., Gingl, Z., Visy, C., & Janáky, C. (2014) · RSC Advances · doi:10.1039/c4ra09037c · Cited by 32
Measurement of the in-plane thermal conductivity by steady-state infrared thermography
Greppmair, A., Stoib, B., Saxena, N., Gerstberger, C., Müller‐Buschbaum, P., Stutzmann, M., & Brandt, M. S. (2017) · Review of Scientific Instruments · doi:10.1063/1.4979564 · Cited by 32
Park, J., Lee, Y., Kim, M., Kim, Y., Tripathi, A., Kwon, Y.-W., Kwak, J., & Woo, H. Y. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b17009 · Cited by 32
Molecular perspective and engineering of thermal transport and thermoelectricity in polymers
Yelishala, S. C., Murphy, C., & Cui, L. (2024) · Journal of Materials Chemistry A · doi:10.1039/d3ta08071d · Cited by 35
Carrier–Carrier Repulsion Limits the Conductivity of N‐Doped Organic Semiconductors
Yang, X., Ye, G., Liu, J., Chiechi, R. C., & Koster, L. J. A. (2024) · Advanced Materials · doi:10.1002/adma.202404397 · Cited by 31
Interconnect patterns for printed organic thermoelectric devices with large fill factors
Gordiz, K., Menon, A. K., & Yee, S. K. (2017) · Journal of Applied Physics · doi:10.1063/1.4989589 · Cited by 31
Kirigami-Inspired Conducting Polymer Thermoelectrics from Electrostatic Recognition Driven Assembly
Guan, Y., Li, H., Ren, F., & Ren, S. (2018) · ACS Nano · doi:10.1021/acsnano.8b02489 · Cited by 31
Yvenou, É., Sandroni, M., Carella, A., Gueye, M. N., Faure‐Vincent, J., Pouget, S., Demadrille, R., & Simonato, J. (2020) · Materials Chemistry Frontiers · doi:10.1039/d0qm00265h · Cited by 31
Rafique, S., Burton, M., Badiei, N., Gonzalez-Feijoo, J. E., Mehraban, S., Carnie, M. J., Tarat, A., & Li, L. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c06050 · Cited by 31
Effects of conductivity-enhancement reagents on self-healing properties of PEDOT:PSS films
Xin, X., Xue, Z., Gao, N., Yu, J., Liu, H., Zhang, W., Xu, J., & Chen, S. (2020) · Synthetic Metals · doi:10.1016/j.synthmet.2020.116503 · Cited by 31
Cui, Y. J., Wang, B. L., & Wang, K. F. (2021) · Energy · doi:10.1016/j.energy.2021.120694 · Cited by 31
Li, M., Chen, J., Luo, M., Zhong, W., Wang, W., Qing, X., Lü, Y., Yang, L., Liu, Q., Wang, Y., et al. (2021) · Energy Conversion and Management · doi:10.1016/j.enconman.2021.114432 · Cited by 31
Han, J., Tiernan, E. M., Lee, T., Chiu, A., McGuiggan, P., Adams, N. P., Tomko, J. A., Hopkins, P. E., Thon, S. M., Tovar, J. D., et al. (2022) · Advanced Materials · doi:10.1002/adma.202201062 · Cited by 31
Dual Post‐Treatments Boost Thermoelectric Performance of PEDOT:PSS Films and Their Devices
Wu, T., Shi, X., Liu, W., Sun, S., Liu, Q., & Chen, Z. (2022) · Macromolecular Materials and Engineering · doi:10.1002/mame.202200411 · Cited by 31
Explaining the effects of processing on the electrical properties of PEDOT:PSS
van Reenen, S., Scheepers, M. M., van de Ruit, K., Bollen, D., & Kemerink, M. (2014) · Organic Electronics · doi:10.1016/j.orgel.2014.10.029 · Cited by 31
Boudouris, B. W. (2013) · Current Opinion in Chemical Engineering · doi:10.1016/j.coche.2013.07.002 · Cited by 31
Zhang, M., Li, J., Liu, Y., Liu, Y., Huang, C., Liu, R., Wei, P., Zhao, W., Xie, W., Weidenkaff, A., et al. (2025) · Nano Energy · doi:10.1016/j.nanoen.2025.110836 · Cited by 30
A synthetic approach for enhanced thermoelectric properties of PEDOT:PSS bulk composites
Wei, K., Stedman, T., Ge, Z., Woods, L. M., & Nolas, G. S. (2015) · Applied Physics Letters · doi:10.1063/1.4933254 · Cited by 30
Zhang, K., Wang, S., Qiu, J., Blackburn, J. L., Zhang, X., Ferguson, A. J., Miller, E. M., & Weeks, B. L. (2015) · Nano Energy · doi:10.1016/j.nanoen.2015.11.005 · Cited by 30
Self-citationThermoelectric properties of PEDOT films prepared by electrochemical polymerization
Zhang, L., Goto, T., Imae, I., Sakurai, Y., & Harima, Y. (2017) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.24299 · Cited by 30
Park, W., Hwang, H., Kim, S., Park, S., & Jang, K. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c20592 · Cited by 30
Atomistic Modeling of PEDOT:PSS Complexes I: DFT Benchmarking
Michaels, W., Zhao, Y., & Qin, J. (2021) · Macromolecules · doi:10.1021/acs.macromol.1c00351 · Cited by 30
Fiber-Based Thermoelectric Materials and Devices for Wearable Electronics
Zhang, P., Deng, B., Sun, W., Zheng, Z., & Liu, W. (2021) · Micromachines · doi:10.3390/mi12080869 · Cited by 31
Adekoya, G. J., Adekoya, O. C., Sadiku, R. E., & Ray, S. S. (2021) · Composites Communications · doi:10.1016/j.coco.2021.100890 · Cited by 30
Organic electrochemical transistors toward synaptic electronics
Zhou, B., Liu, W., Xu, Y., Jin, C., Yang, J., & Sun, J. (2022) · Journal of Physics D Applied Physics · doi:10.1088/1361-6463/ac67b9 · Cited by 34
“…such as PSS, is the most popular material and it has attracted a lot of attention due to its good charge transfer, high chemical stability [45, 78], simple preparation procedure, such as using doping-processing techniques [79], and wide application fields, such as diodes and solar cells [67, 68].”
Organic thermoelectric generators: working principles, materials, and fabrication techniques
Eryilmaz, I. H., Chen, Y., Mattana, G., & Orgiu, E. (2023) · Chemical Communications · doi:10.1039/d2cc04205c · Cited by 30
Lu, B., Chen, S., Xu, J., & Zhao, G. (2013) · Synthetic Metals · doi:10.1016/j.synthmet.2013.09.013 · Cited by 30
Enhanced power factor within graphene hybridized carbon aerogels
Lei, Z., Yan, Y., Feng, J., Wu, J., Huang, G., Li, X., Wang, X., & Zhao, L. (2015) · RSC Advances · doi:10.1039/c5ra03198b · Cited by 30
Correlation between Seebeck coefficient and transport energy level in poly(3-hexylthiophene)
Zou, Y., Huang, D., Meng, Q. B., Di, C., & Zhu, D. (2018) · Organic Electronics · doi:10.1016/j.orgel.2018.02.008 · Cited by 30
Zhang, J., Song, G., Qiu, L., Feng, Y., Chen, J., Yan, J., Liu, L., Huang, X., Cui, Y., Sun, Y., et al. (2018) · Macromolecular Rapid Communications · doi:10.1002/marc.201800283 · Cited by 30
Progress in Nickel‐Coordinated Polymers as Intrinsically Conducting n‐Type Thermoelectric Materials
Menon, A. K., Wolfe, R. M. W., Kommandur, S., & Yee, S. K. (2019) · Advanced Electronic Materials · doi:10.1002/aelm.201800884 · Cited by 30
Niu, H., Liu, Y., Song, H., Meng, Q., Du, Y., & Shen, S. (2021) · Synthetic Metals · doi:10.1016/j.synthmet.2021.116752 · Cited by 30
Naim, A. F. A., Ibrahim, S. S., & El-Shamy, A. G. (2021) · Polymer · doi:10.1016/j.polymer.2021.123792 · Cited by 30
Hwang, I., Mun, S., Youn, J.-H., Kim, H. J., Park, S. K., Choi, M., Kang, T. J., Pei, Q., & Yun, S. (2024) · Nature Communications · doi:10.1038/s41467-024-46709-7 · Cited by 32
“] Elastic modulus (GPa) [44] [36,37] [42] This work [38] [39] [38] [40] [43] [45] [41] [46] Fig.”
Baysal, H. E., Yu, T., Naenen, V., Smedt, S. D., Hiz, D., Zhang, B., Xia, H., Florenciano, I., Rosenthal, M., Cardinaels, R., et al. (2025) · Advanced Science · doi:10.1002/advs.202412491 · Cited by 29
Nanotesla magnetoresistance in π-conjugated polymer devices
Klemm, P., Bange, S., Pollmann, A., Boehme, C., & Lupton, J. M. (2017) · Physical review. B./Physical review. B · doi:10.1103/physrevb.95.241407 · Cited by 29
Nanowire-based thermoelectrics
Ali, A., Chen, Y., Vasiraju, V., & Vaddiraju, S. (2017) · Nanotechnology · doi:10.1088/1361-6528/aa75ae · Cited by 29
“discussed below, higher zT values were achieved in both PEDOT and PEDOT:PSS recently [222, 223].”
BackgroundMethodInfluentialBharti, M., Singh, A., Saini, G., Saha, S., Bohra, A., Kaneko, Y., Debnath, A. K., Muthe, K. P., Marumoto, K., Aswal, D. K., et al. (2019) · Journal of Power Sources · doi:10.1016/j.jpowsour.2019.226758 · Cited by 29
Lim, J. Y., Cho, S., Kim, H., & Seo, Y. (2019) · ACS Applied Energy Materials · doi:10.1021/acsaem.9b01702 · Cited by 29
PEDOT:PSS and Ni-based thermoelectric generator for solar thermal energy conversion
Feng, K. M., Xu, L., Xiong, Y., Sun, L., Yu, H., Wu, M., Thant, A. A., & Hu, B. (2020) · Journal of Materials Chemistry C · doi:10.1039/c9tc06277g · Cited by 29
Xu, Q. G., Xu, S., Tian, R., & Lu, C. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c00949 · Cited by 30
Karimi, M., Mehrabadi, Z., Farsadrooh, M., Bafkary, R., Derikvandi, H., Hayati, P., & Mohammadi, K. (2021) · Interface science and technology · doi:10.1016/b978-0-12-818805-7.00010-2 · Cited by 30
Jung, S., Kwon, J., Lee, J., Lee, B., Kim, K., Yu, D.-S., & Kim, Y. (2021) · Applied Energy · doi:10.1016/j.apenergy.2021.117334 · Cited by 29
Sun, S., Shi, X., Liu, W., Wu, T., Wang, D., Wu, H., Zhang, X., Wang, Y., Liu, Q., & Chen, Z. (2022) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c24649 · Cited by 29
Du, T., Liu, Y., Deng, Y., & Geng, Y. (2022) · Chinese Journal of Chemistry · doi:10.1002/cjoc.202200679 · Cited by 29
Kuang, Y., Heester, S., Shao, S., Ye, G., Yao, T., Xie, Z., Koster, L. J. A., & Liu, J. (2024) · Journal of Materials Chemistry A · doi:10.1039/d3ta07188j · Cited by 29
On-chip thermoelectric module comprised of oxide thin film legs
Saini, S., Mele, P., Miyazaki, K., & Tiwari, A. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.02.001 · Cited by 29
Ushirokita, H., & Tada, H. (2016) · Chemistry Letters · doi:10.1246/cl.160175 · Cited by 29
Sun, Y., Zhang, J., Liu, L., Qin, Y., Sun, Y., Xu, W., & Zhu, D. (2016) · Science China Chemistry · doi:10.1007/s11426-016-0175-9 · Cited by 29
Influence of electronic type of SWNTs on the thermoelectric properties of SWNTs/PANI composite films
Wang, L., Yao, Q., Qu, S., Shi, W., & Chen, L. (2016) · Organic Electronics · doi:10.1016/j.orgel.2016.09.008 · Cited by 29
Thermoelectric Properties of Poly(3-Hexylthiophene) Nanofiber Mat with a Large Void Fraction
Hiura, S., Okada, N., Wakui, J., Narita, H., Kanehashi, S., & Shimomura, T. (2017) · Materials · doi:10.3390/ma10050468 · Cited by 29
Piao, M., Li, C., Joo, M., Chu, J., Wang, X., Chi, Y., Zhang, H., & Shi, H. (2018) · Energy Technology · doi:10.1002/ente.201800025 · Cited by 29
Thienoquinoidal System: Promising Molecular Architecture for Optoelectronic Applications
Takimiya, K., & Kawabata, K. (2018) · Journal of Synthetic Organic Chemistry Japan · doi:10.5059/yukigoseikyokaishi.76.1176 · Cited by 29
Yemata, T. A., Zheng, Y., Kyaw, A. K. K., Wang, X., Song, J. C., Chin, W. S., & Xu, J. (2020) · Organic Electronics · doi:10.1016/j.orgel.2020.105682 · Cited by 29
Nguyễn, T. T. L., Cho, S. J., Ko, J., Nguyen, D. C. T., Kim, M. W., Kim, N. D., Lee, D. S., & Joo, Y. (2024) · Carbon · doi:10.1016/j.carbon.2024.119567 · Cited by 28
Sun, Q., Du, C., & Chen, G. (2024) · Advanced Nanocomposites · doi:10.1016/j.adna.2024.11.001 · Cited by 28
Slobodian, P., Říha, P., Olejník, R., Kovář, M., & Svoboda, P. (2013) · Journal of Nanomaterials · doi:10.1155/2013/792875 · Cited by 28
Complete Thermoelectric Characterization of PEDOT:PSS Thin Films with a Novel ZT Test Chip Platform
Linseis, V., Hassan, Z. M., Reith, H., Garcı́a, J., Nielsch, K., Baumgart, H., Redel, E., & Woias, P. (2018) · physica status solidi (a) · doi:10.1002/pssa.201700930 · Cited by 28
Metadata
- Authors
- Kim, G.-H., Shao, L., Zhang, K., & Pipe, K. P.
- Affiliations
- University of Michigan (US)
- Corresponding author
- Pipe, K. P.
- ORCID
- Venue
- Nature Materials
- Published
- 2013-05-05
- Volume
- 12
- Issue
- 8
- Pages
- 719-723
- ISSN
- 1476-1122 (ISSN-L)
- 1476-4660
- OpenAlex
- W2001566902
- Cited by
- 1,688
- References
- 16
- Citations by year
- 2026: 65 · 2025: 90 · 2024: 106 · 2023: 115 · 2022: 120 · 2021: 187 · 2020: 172 · 2019: 178 · 2018: 160 · 2017: 147 · 2016: 155 · 2015: 113 · 2014: 69 · 2013: 11
- FWCI
- 52.38
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.springer.com/tdm (tdm)
- www.springer.com/tdm (vor)
- Locations
- Nature Materials (publishedVersion)
- PubMed (publishedVersion)
- Scholarworks@UNIST (Ulsan National Institute of Science and Technology) (submittedVersion)
- Funders
- U.S. Department of Energy (DESC0000957)
- Basic Energy Sciences
- Energy Frontier Research Centers
- Topics
- Physical Sciences › Materials Science › Materials Chemistry › Advanced Thermoelectric Materials and Devices
- Physical Sciences › Materials Science › Materials Chemistry › Thermal properties of materials
- Physical Sciences › Materials Science › Polymers and Plastics › Conducting polymers and applications
- Keywords
- organic thermoelectrics, organic semiconductors, dopant engineering, figure of merit ZT, PEDOT:PSS, PEDOT, Seebeck coefficient, electrical conductivity, carrier concentration, conducting polymers, nanostructured materials
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.