Engineered doping of organic semiconductors for enhanced thermoelectric efficiency
The DOI matches its Crossref record; 16 of the 16 references it cites were found in a registry or an index.
Abstract
Significant improvements to the thermoelectric figure of merit ZT have emerged in recent years, primarily due to the engineering of material composition and nanostructure in inorganic semiconductors (ISCs). However, many present high-ZT materials are based on low-abundance elements that pose challenges for scale-up, as they entail high material costs in addition to brittleness and difficulty in large-area deposition. Here we demonstrate a strategy to improve ZT in conductive polymers and other organic semiconductors (OSCs) for which the base elements are earth-abundant. By minimizing total dopant volume, we show that all three parameters constituting ZT vary in a manner so that ZT increases; this stands in sharp contrast to ISCs, for which these parameters have trade-offs. Reducing dopant volume is found to be as important as optimizing carrier concentration when maximizing ZT in OSCs. Implementing this strategy with the dopant poly(styrenesulphonate) in poly(3,4-ethylenedioxythiophene), we achieve ZT = 0.42 at room temperature.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Various soft conductive materials such as thin metal,[106] conductive polymers,[508] nanomaterials,[509] etc. can be thermally actuated in the form of resistors.”
From Flexible Electronics and Devices as Human–Machine Interfaces for Medical Robotics (2022) · cites this paper as [508]
Citations
Cites
Cooling, Heating, Generating Power, and Recovering Waste Heat with Thermoelectric Systems
Bell, L. E. (2008) · Science · doi:10.1126/science.1158899 · Cited by 6,082
Bubnova, O., Khan, Z. U., Malti, A., Braun, S., Fahlman, M., Berggren, M., & Crispin, X. (2011) · Nature Materials · doi:10.1038/nmat3012 · Cited by 1,769
Kim, Y. H., Sachse, C., Machala, M. L., May, C., Müller‐Meskamp, L., & Leo, K. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201002290 · Cited by 1,458
Xia, Y., Sun, K., & Ouyang, J. (2012) · Advanced Materials · doi:10.1002/adma.201104795 · Cited by 1,124
PEDOT: Principles and Applications of an Intrinsically Conductive Polymer
Elschner, A., Kirchmeyer, S., Lovenich, W., Merker, U., & Reuter, K. (2010) · CRC Press eBooks · doi:10.1201/b10318 · Cited by 758
Microscopic Understanding of the Anisotropic Conductivity of PEDOT:PSS Thin Films
Nardes, A. M., Kemerink, M., Janssen, R. A. J., Bastiaansen, J. A. M., Kiggen, N. M. M., Langeveld, B. M. W., van Breemen, A. J. J. M., & de Kok, M. M. (2007) · Advanced Materials · doi:10.1002/adma.200602575 · Cited by 539
Zhang, B., Sun, J., Katz, H. E., Fang, F., & Opila, R. L. (2010) · ACS Applied Materials & Interfaces · doi:10.1021/am100654p · Cited by 480
Microscopical Investigations of PEDOT:PSS Thin Films
Lang, U., Müller, E., Naujoks, N., & Dual, J. (2009) · Advanced Functional Materials · doi:10.1002/adfm.200801258 · Cited by 457
Poly(3,4-ethylenedioxythiophene) as promising organic thermoelectric materials: A mini-review
Yue, R., & Xu, J. (2012) · Synthetic Metals · doi:10.1016/j.synthmet.2012.04.005 · Cited by 275
Koh, Y. K., Singer, S. L., Kim, W., Zide, J. M. O., Lu, H., Cahill, D. G., Majumdar, A., & Gossard, A. C. (2009) · Journal of Applied Physics · doi:10.1063/1.3078808 · Cited by 205
Cited by
Items 601–700 of 1,000
Manghwar, R., Selvaraj, J. A.-L., Rahim, N. A., Kumar, L., & Khoharo, H. (2024) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2024.124231 · Cited by 43
Tailoring structure and magnetic characteristics of strontium hexaferrite via Al doping engineering
Wang, H. Z., Hai, Y. N., Yao, B., Xu, Y., Shan, L., Xu, L., Tang, J., & Wang, Q. H. (2016) · Journal of Magnetism and Magnetic Materials · doi:10.1016/j.jmmm.2016.08.066 · Cited by 43
Liu, L., Sun, Y., Li, W., Zhang, J., Huang, X., Chen, Z., Sun, Y., Di, C., Xu, W., & Zhu, D. (2017) · Materials Chemistry Frontiers · doi:10.1039/c7qm00223h · Cited by 43
Wang, Y., Yu, C., Sheng, M., Song, S., & Deng, Y. (2018) · Advanced Materials Interfaces · doi:10.1002/admi.201701168 · Cited by 43
Shi, W. Y., Wu, G., Hippalgaonkar, K., Wang, J., Xu, J., & Yang, S. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b08270 · Cited by 43
Designing π-conjugated polymer blends with improved thermoelectric power factors
Abtahi, A., Johnson, S. L., Park, S. M., Luo, X., Liang, Z., Mei, J., & Graham, K. R. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta07464c · Cited by 43
Yoon, S. E., Kang, Y., Noh, S. Y., Park, J., Lee, S. Y., Park, J., Lee, D. W., Whang, D. R., Kim, T., Kim, G.-H., et al. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b17825 · Cited by 43
Self-citationAtoyo, J., Burton, M., McGettrick, J., & Carnie, M. J. (2020) · Polymers · doi:10.3390/polym12030559 · Cited by 43
Yemata, T. A., Zheng, Y., Kyaw, A. K. K., Wang, X., Song, J. C., Chin, W. S., & Xu, J. (2020) · Materials Advances · doi:10.1039/d0ma00522c · Cited by 43
Enhanced thermoelectric performance of F4-TCNQ doped FASnI 3 thin films
Zheng, L., Zhu, T., Li, Y., Wu, H., Yi, C., Zhu, J., & Gong, X. (2020) · Journal of Materials Chemistry A · doi:10.1039/d0ta09329g · Cited by 43
Li, H., Zong, Y., Ding, Q., Han, W., & Li, X. (2021) · Journal of Power Sources · doi:10.1016/j.jpowsour.2021.229992 · Cited by 43
Thermoelectric properties of graphite-PEDOT:PSS coated flexible polyester fabrics
Du, Y., Xu, J., Wang, Y., & Lin, T. (2016) · Journal of Materials Science Materials in Electronics · doi:10.1007/s10854-016-6250-2 · Cited by 47
Zhao, T., Wang, D., & Shuai, Z. (2017) · Synthetic Metals · doi:10.1016/j.synthmet.2017.01.003 · Cited by 42
Tang, X., Liu, T., Li, H., Yang, D., Chen, L., & Tang, X. (2017) · RSC Advances · doi:10.1039/c7ra02302b · Cited by 42
Flexible and Transparent Organic–Inorganic Hybrid Thermoelectric Modules
Dong, X., Xiong, S., Luo, B., Ge, R., Li, Z., Li, J., & Zhou, Y. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b08696 · Cited by 42
Yin, Y., Baskaran, K., & Tiwari, A. (2019) · physica status solidi (a) · doi:10.1002/pssa.201800904 · Cited by 44
Seki, Y., & Takashiri, M. (2019) · Organic Electronics · doi:10.1016/j.orgel.2019.105478 · Cited by 43
Delamination-Resistant Imperceptible Bioelectrode for Robust Electrophysiological Signals Monitoring
Tang, W., Zhou, Y., Chen, S., Yu, S., Yang, Y., Lin, J., Yin, S., Ma, Y., & Hu, B. (2021) · ACS Materials Letters · doi:10.1021/acsmaterialslett.1c00353 · Cited by 42
Sheng, P., Sun, Y., Jiao, F., Di, C., Xu, W., & Zhu, D. (2014) · Synthetic Metals · doi:10.1016/j.synthmet.2014.03.024 · Cited by 42
Nanostructured Semiconducting PEDOT–TiO2/ZnO Hybrid Composites for Nanodevice Applications
Ramakrishnan, R., Devaki, S. J., Aashish, A., Thomas, S., Varma, M. R., & Najiya, K. P. P. (2016) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.5b10744 · Cited by 41
Nell, B., Ortstein, K., Boltalina, O. V., & Vandewal, K. (2018) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.8b03804 · Cited by 41
Systematic Power Factor Enhancement in n‐Type NiETT/PVDF Composite Films
Menon, A. K., Wolfe, R. M. W., Marder, S. R., Reynolds, J. R., & Yee, S. K. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201801620 · Cited by 41
Solar light sensitive photodiode produced using a coumarin doped bismuth oxide composite
Dere, A., Soylu, M., & YAKUPHANOĞLU, F. (2018) · Materials Science in Semiconductor Processing · doi:10.1016/j.mssp.2018.10.009 · Cited by 41
Flexible and wearable plasmonic-enabled organic/inorganic hybrid photothermoelectric generators
Xin, C., Hu, Z., Fang, Z., Chaudhary, M., Xiang, H., Xu, X., Aigouy, L., & Chen, Z. (2021) · Materials Today Energy · doi:10.1016/j.mtener.2021.100859 · Cited by 41
Ju, D., Kim, J., Yook, H., Han, J. W., & Cho, K. (2021) · Nano Energy · doi:10.1016/j.nanoen.2021.106604 · Cited by 41
Development of Thermoelectric Conversion Materials Using Carbon Nanotube Sheets
Fujigaya, T. (2019) · Bulletin of the Chemical Society of Japan · doi:10.1246/bcsj.20180272 · Cited by 40
Song, J. H., Park, J., Kim, S. H., & Kwak, J. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.2c17263 · Cited by 40
Feng, K., Wang, J., Jeong, S. Y., Yang, W., Li, J., Woo, H. Y., & Guo, X. (2023) · Advanced Science · doi:10.1002/advs.202302629 · Cited by 40
Application of hydrogel for energy storage and conversion
Wang, H., & Zhao, W. (2023) · Next Materials · doi:10.1016/j.nxmate.2023.100049 · Cited by 45
High-performance thermoelectric PEDOT:PSS fiber bundles via rational ionic liquid treatment
Deng, Y.-Y., Shi, X., Wu, T., Wu, H., Liu, Y.-M., Zhu, M. H., Liu, W., Li, M., Pei, H., Liu, Q., et al. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.158104 · Cited by 40
Design of a Wearable Thermoelectric Generator for Harvesting Human Body Energy
Liu, H., Wang, Y., Mei, D., Shi, Y., & Chen, Z. (2016) · Lecture notes in electrical engineering · doi:10.1007/978-981-10-2404-7_5 · Cited by 40
Exploring different doping mechanisms in thermoelectric polymer/carbon nanotube composites
Dörling, B., Sandoval, S., Kankla, P., Fuertes, A., Tobías, G., & Campoy‐Quiles, M. (2017) · Synthetic Metals · doi:10.1016/j.synthmet.2017.01.002 · Cited by 40
“Still, a precise control of the doping level of conjugated polymers allowed to significantly reduce the performance gap that exists between inorganic and organic materials [2].”
BackgroundDesigning hybrid architectures for advanced thermoelectric materials
Zheng, Y., Luo, Y., Du, C., Zhu, B., Liang, Q., Hng, H. H., Hippalgaonkar, K., Xu, J., & Yan, Q. (2017) · Materials Chemistry Frontiers · doi:10.1039/c7qm00306d · Cited by 40
Shi, W. Y., Wu, G., Yong, X., Deng, T., Wang, J., Zheng, J., Xu, J., Sullivan, M. B., & Yang, S. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b13877 · Cited by 40
Shi, W. Y., Deng, T., Wu, G., Hippalgaonkar, K., Wang, J., & Yang, S. (2019) · Advanced Materials · doi:10.1002/adma.201901956 · Cited by 40
Alsufyani, M., Hallani, R. K., Wang, S., Xiao, M., Ji, X., Paulsen, B. D., Xu, K., Bristow, H. L., Chen, H., Chen, X., et al. (2020) · Journal of Materials Chemistry C · doi:10.1039/d0tc03347b · Cited by 40
Paulraj, I., Liang, T.-F., Yang, T.-S., Wang, C., Chen, J., Wang, Y., & Liu, C. (2020) · ACS Applied Energy Materials · doi:10.1021/acsaem.0c02411 · Cited by 40
Okada, N., Sato, K., Yokoo, M., Kodama, E., Kanehashi, S., & Shimomura, T. (2020) · ACS Applied Polymer Materials · doi:10.1021/acsapm.0c01185 · Cited by 40
Dey, A., Panja, S., Sikder, A. K., & Chattopadhyay, S. (2014) · RSC Advances · doi:10.1039/c4ra14655g · Cited by 40
PEDOT:PSS: Smart Infrared Rewritable Materials
Wang, X., Wu, Z., Liu, Y., Yin, L., Hou, S., Mao, J., Cao, F., & Zhang, Q. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202300886 · Cited by 39
Li, C., Shan, C., Luo, D., Gu, X., Le, Q., Kyaw, A. K. K., Dong, Z., Sun, K., & Ouyang, J. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202311578 · Cited by 39
Xiong, M., Deng, X., Tian, S., Liu, K., Fang, Y., Wang, J., Wang, Y., Liu, G., Chen, J., Villalva, D. R., et al. (2024) · Nature Communications · doi:10.1038/s41467-024-49208-x · Cited by 39
Wang, Y. Y., Cai, K., Shen, S., & Yao, X. (2015) · Synthetic Metals · doi:10.1016/j.synthmet.2015.08.034 · Cited by 39
Liu, Y., Song, Z., Zhang, Q., Zhou, Z., Tang, Y., Wang, L., Zhu, J., Luo, W. D., & Jiang, W. (2015) · RSC Advances · doi:10.1039/c5ra05551b · Cited by 39
Thermoelectric performance of PEDOT:PSS/Bi2Te3-nanowires: a comparison of hybrid types
Xiong, J., Wang, L., Xu, J., Liu, C., Zhou, W., Shi, H., Jiang, Q., & Jiang, F. (2015) · Journal of Materials Science Materials in Electronics · doi:10.1007/s10854-015-3952-9 · Cited by 39
Beretta, D., Barker, A. J., Maqueira-Albo, I., Calloni, A., Bussetti, G., Dell’Erba, G., Luzio, A., Duò, L., Petrozza, A., Lanzani, G., et al. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b04533 · Cited by 39
He, Y., Spataru, C. D., Léonard, F., Jones, R. E., Foster, M. E., Allendorf, M. D., & Talin, A. A. (2017) · Physical Chemistry Chemical Physics · doi:10.1039/c7cp03310a · Cited by 40
Du, Y., Chen, J., Liu, X., Lu, C. P., Xu, J., Paul, B., & Eklund, P. (2018) · Coatings · doi:10.3390/coatings8010025 · Cited by 39
“This is a low value compared to inorganic materials (typically ranging from ~1 × 10−4 to ~4 × 10−3 W·m−1·K−2) [34,35] or the best organic thermoelectrics (~100–~500 μW·m−1·K−2) [18], but still higher than, for example, that of the conjugated polymer ClBDPPV combined with 25 mol % tetrabutylammonium fluoride (0.”
BackgroundUniversality of the giant Seebeck effect in organic small molecules
Kojima, H., Abe, R., Fujiwara, F., Nakagawa, M., Takahashi, K., Kuzuhara, D., Yamada, H., Yakiyama, Y., Sakurai, H., Yamamoto, T., et al. (2018) · Materials Chemistry Frontiers · doi:10.1039/c7qm00596b · Cited by 39
Energy-harvesting materials for smart fabrics and textiles
Torah, R. N., Lawrie-Ashton, J., Li, Y., Arumugam, S., Sodano, H. A., & Beeby, S. (2018) · MRS Bulletin · doi:10.1557/mrs.2018.9 · Cited by 39
Long-term ageing of PEDOT:PSS: wettability Study
Duc, C., Malliaras, G. G., Senez, V., & Vlandas, A. (2018) · Synthetic Metals · doi:10.1016/j.synthmet.2018.02.003 · Cited by 39
Baranwal, A. K., Saini, S., Wang, Z., Hirotani, D., Yabuki, T., Iikubo, S., Miyazaki, K., & Hayase, S. (2019) · Organic Electronics · doi:10.1016/j.orgel.2019.105488 · Cited by 39
Liu, S., Kong, J., Chen, H., & He, C. (2019) · ACS Applied Energy Materials · doi:10.1021/acsaem.9b01834 · Cited by 39
Free‐Standing Conducting Polymer Films for High‐Performance Energy Devices
Li, Z., Ma, G., Ge, R., Qin, F., Dong, X., Meng, W., Liu, T., Tong, J., Jiang, F., Zhou, Y., et al. (2015) · Angewandte Chemie · doi:10.1002/ange.201509033 · Cited by 39
Meng, X., Mo, L., Han, S., Zhao, J., Pan, Y., Fangdong, W., Fang, Y., & Li, L. (2022) · Advanced Materials Interfaces · doi:10.1002/admi.202201927 · Cited by 39
Geng, X., Du, T., Xu, C., Liu, Y., Deng, Y., & Geng, Y. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202300809 · Cited by 39
Enhanced power factor in flexible reduced graphene oxide/nanowires hybrid films for thermoelectrics
Gao, J., Liu, C., Miao, L., Wang, X., Peng, Y., & Chen, Y. (2016) · RSC Advances · doi:10.1039/c6ra00916f · Cited by 39
Additive manufacturing of thermoelectric materials: materials, synthesis and manufacturing: a review
Bi, J., Liu, Z., Li, B., Li, S., Yang, Z., Старостенков, М. Д., & Dong, G. (2023) · Journal of Materials Science · doi:10.1007/s10853-023-08953-y · Cited by 38
“(1) ZT = S ∕ Inorganic TE materials [10–14], conductive polymer TE materials [15–17] and inorganic polymer TE composites [18–23] are the most frequent types of TE materials.”
Wang, L., Bi, H., Yao, Q., Ren, D., Qu, S., Huang, F., & Chen, L. (2017) · Composites Science and Technology · doi:10.1016/j.compscitech.2017.07.001 · Cited by 38
Broch, K., Venkateshvaran, D., Lemaur, V., Olivier, Y., Beljonne, D., Zelazny, M., Nasrallah, I., Harkin, D. J., Statz, M., Pietro, R. D., et al. (2017) · Advanced Electronic Materials · doi:10.1002/aelm.201700225 · Cited by 38
Degousée, T., Untilova, V., Vijayakumar, V., Xu, X., Sun, Y., Palma, M., Brinkmann, M., Biniek, L., & Fenwick, O. (2021) · Journal of Materials Chemistry A · doi:10.1039/d1ta03377h · Cited by 39
Kim, S., Na, Y., Nam, C., Jeong, C. K., Kim, K. T., & Park, K. (2022) · Nano Energy · doi:10.1016/j.nanoen.2022.107824 · Cited by 38
Flexible Thermoelectrics Based on Plastic Inorganic Semiconductors
Chen, K., Wang, L., Luo, Z., Xu, X., Li, Y., Liu, S., & Zhao, Q. (2023) · Advanced Materials Technologies · doi:10.1002/admt.202300189 · Cited by 40
Optimized design for flexible polymer thermoelectric generators
Aranguren, P., Roch, A., Stepien, L., Abt, M., Lukowicz, M. V., Dani, I., & Astrain, D. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.03.037 · Cited by 38
Dey, A., Hadavale, S., Khan, M. A. S., More, P. V., Khanna, P. K., Sikder, A. K., & Chattopadhyay, S. (2015) · Dalton Transactions · doi:10.1039/c5dt02877a · Cited by 37
Enhanced thermoelectric properties of PEDOT/PSS/Te composite films treated with H2SO4
Song, H., Cai, K., & Shen, S. (2016) · Journal of Nanoparticle Research · doi:10.1007/s11051-016-3701-x · Cited by 37
Smith, P. M., Su, L., Gong, W., Nakamura, N., Reeja‐Jayan, B., & Shen, S. (2018) · RSC Advances · doi:10.1039/c8ra03302a · Cited by 37
Flexible thermoelectric device based on TiS2(HA)x n-type nanocomposite printed on paper
Ferhat, S., Domain, C., Vidal, J., Noël, D., Ratier, B., & Lucas, B. (2019) · Organic Electronics · doi:10.1016/j.orgel.2019.02.031 · Cited by 37
Niu, R., Pan, C., Chen, Z., Wang, L., & Wang, L. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.122650 · Cited by 37
Thermoelectric properties of PEDOT: PSS and acid-treated SWCNT composite films
Chung, S.-H., Kim, D. H., Kim, H., Kim, H., & Jeong, S. W. (2019) · Materials Today Communications · doi:10.1016/j.mtcomm.2019.100867 · Cited by 37
High energy electron beam induced improved thermoelectric properties of PEDOT:PSS films
Chaudhary, N., Singh, A., Aswal, D. K., Bharti, M., Sharma, A., Tillu, A. R., Roy, M., Singh, B. P., Bahadur, J., Putta, V., et al. (2020) · Polymer · doi:10.1016/j.polymer.2020.122645 · Cited by 37
Stable organic thermoelectric devices for self-powered sensor applications
Mukaida, M., Kirihara, K., Horike, S., & Wei, Q. (2020) · Journal of Materials Chemistry A · doi:10.1039/d0ta08598g · Cited by 37
Engineering the Thermoelectrical Properties of PEDOT:PSS by Alkali Metal Ion Effect
Dong, J., Liu, J., Qiu, X., Chiechi, R. C., Koster, L. J. A., & Portale, G. (2021) · Engineering · doi:10.1016/j.eng.2021.02.011 · Cited by 38
Photo-enhanced Seebeck effect of a highly conductive thermoelectric material
Yue, S., Cheng, H., He, H. H., Guan, X., Le, Q., Shu, X., Shi, S., Chen, J., & Ouyang, J. (2021) · Journal of Materials Chemistry A · doi:10.1039/d1ta04366h · Cited by 37
Ge, G., Li, J., Wang, J., Xiong, M., Xue, D., Li, Z. S., Li, J., Cao, X., Lei, T., & Wang, J. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202108289 · Cited by 37
Position‐Induced Efficient Doping for Highly Doped Organic Thermoelectric Materials
Min, J., Kim, D., Han, S. G., Park, C., Lim, H., Sung, W., & Cho, K. (2021) · Advanced Electronic Materials · doi:10.1002/aelm.202101142 · Cited by 37
Li, H., Zong, Y., He, J., Ding, Q., Jiang, Y., Li, X., & Han, W. (2021) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2021.119036 · Cited by 39
Interplay Between Doping, Morphology, and Lattice Thermal Conductivity in PEDOT:PSS
Floris, P. S., Melis, C., & Rurali, R. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202215125 · Cited by 37
Kim, G.-H., Kim, J., & Pipe, K. P. (2016) · Applied Physics Letters · doi:10.1063/1.4942598 · Cited by 37
Self-citationMai, C., Líu, J., Evans, C. M., Segalman, R. A., Chabinyc, M. L., Cahill, D. G., & Bazan, G. C. (2016) · Macromolecules · doi:10.1021/acs.macromol.6b00546 · Cited by 36
Lee, W., Kang, Y. H., Lee, J. Y., Jang, K., & Cho, S. Y. (2016) · Materials Today Communications · doi:10.1016/j.mtcomm.2016.12.002 · Cited by 36
Satoh, N., Otsuka, M., Ohki, T., Ohi, A., Sakurai, Y., Yamashita, Y., & Mori, T. (2018) · Science and Technology of Advanced Materials · doi:10.1080/14686996.2018.1487239 · Cited by 36
“Similar to the immersed case [9], however, both the S and the σ were enhanced in the region from pH 4 to pH 8, which can be explained by the removed PSS shortening electron-tunneling distance between the conductive PEDOT chains and enhancing the carrier mobility.”
BackgroundCopper‐Plated Paper for High‐Performance Lithium‐Ion Batteries
Wang, Z., Malti, A., Ouyang, L., Tu, D., Tian, W., Wågberg, L., & Hamedi, M. M. (2018) · Small · doi:10.1002/smll.201803313 · Cited by 36
Villalva, D. R., Haque, M. A., Nugraha, M. I., & Baran, D. (2020) · ACS Applied Energy Materials · doi:10.1021/acsaem.0c01511 · Cited by 36
El-Shamy, A. G. (2020) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2020.123762 · Cited by 36
Xu, Y., Liu, Z., Wei, X., Wu, J., Guo, J., Zhao, B., Wang, H., Chen, S., & Dou, Y. (2020) · Synthetic Metals · doi:10.1016/j.synthmet.2020.116628 · Cited by 36
Singh, D., & Ahuja, R. (2021) · Wiley Interdisciplinary Reviews Computational Molecular Science · doi:10.1002/wcms.1547 · Cited by 36
Thermoelectric Materials for Textile Applications
Chatterjee, K., & Ghosh, T. K. (2021) · Molecules · doi:10.3390/molecules26113154 · Cited by 36
Liang, J., Yin, S., & Wan, C. (2020) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-082319-111001 · Cited by 36
Inorganic‐Based Printed Thermoelectric Materials and Devices
Sarbajna, A., Rösch, A. G., Franke, L., Lemmer, U., & Mallick, M. M. (2022) · Advanced Engineering Materials · doi:10.1002/adem.202200980 · Cited by 38
Humidity Stable Thermoelectric Hybrid Materials Toward a Self‐Powered Triple Sensing System
Tu, S., Tian, T., Xiao, T., Yao, X., Shen, S., Wu, Y., Liu, Y., Bing, Z., Huang, K., Knoll, A., et al. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202316088 · Cited by 36
Metal–organic frameworks for thermoelectric energy-conversion applications
Talin, A. A., Jones, R. E., & Hopkins, P. E. (2016) · MRS Bulletin · doi:10.1557/mrs.2016.242 · Cited by 38
Thermoelectric Properties of Flexible PEDOT:PSS/Polypyrrole/Paper Nanocomposite Films
Li, J., Du, Y., Jia, R., Xu, J., & Shen, S. (2017) · Materials · doi:10.3390/ma10070780 · Cited by 36
“[21] spin-coated ethylene glycol (EG) or dimethyl sulfoxide (DMSO)-doped PEDOT:PSS films on a glass substrate and then immersed the films in EG solvent to decrease the PSS concentration; as a result, a highest ZT value of 0.”
MethodHu, M., Yang, J., Wang, Y., Xia, J., Gan, Q., Yang, S., Xu, J., Liu, S., Yin, W., Jia, B., et al. (2025) · Nature Communications · doi:10.1038/s41467-024-55689-7 · Cited by 37
“Conducting polymers (e.g., PEDOT, PSS) have emerged as promising next-generation fl exible TE materials owing to their low thermal conductivity, adjustable electricalconductivity, and excellent fl exibility 9,10 .”
He, X., Wu, C., Zhang, T., Chen, Z., Wang, L., & Ouyang, J. (2025) · Advanced Functional Materials · doi:10.1002/adfm.202506872 · Cited by 35
Metallo‐organic n‐type thermoelectrics: Emphasizing advances in nickel‐ethenetetrathiolates
Menon, A. K., Uzunlar, E., Wolfe, R. M. W., Reynolds, J. R., Marder, S. R., & Yee, S. K. (2016) · Journal of Applied Polymer Science · doi:10.1002/app.44402 · Cited by 37
Choi, J., Cho, K., & Kim, S. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201602138 · Cited by 35
Lee, Y. H., Oh, J., Lee, S. S., Kim, H., & Son, J. G. (2017) · ACS Macro Letters · doi:10.1021/acsmacrolett.7b00137 · Cited by 37
Origin of poor doping efficiency in solution processed organic semiconductors
Jha, A., Duan, H.-G., Tiwari, V., Thorwart, M., & Miller, R. J. D. (2018) · Chemical Science · doi:10.1039/c8sc00758f · Cited by 35
Tripathi, A., Ko, Y.-J., Kim, M., Lee, Y., Lee, S., Park, J., Kwon, Y.-W., Kwak, J., & Woo, H. Y. (2020) · Macromolecules · doi:10.1021/acs.macromol.0c01025 · Cited by 35
Metadata
- Authors
- Kim, G.-H., Shao, L., Zhang, K., & Pipe, K. P.
- Affiliations
- University of Michigan (US)
- Corresponding author
- Pipe, K. P.
- ORCID
- Venue
- Nature Materials
- Published
- 2013-05-05
- Volume
- 12
- Issue
- 8
- Pages
- 719-723
- ISSN
- 1476-1122 (ISSN-L)
- 1476-4660
- OpenAlex
- W2001566902
- Cited by
- 1,688
- References
- 16
- Citations by year
- 2026: 65 · 2025: 90 · 2024: 106 · 2023: 115 · 2022: 120 · 2021: 187 · 2020: 172 · 2019: 178 · 2018: 160 · 2017: 147 · 2016: 155 · 2015: 113 · 2014: 69 · 2013: 11
- FWCI
- 52.38
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.springer.com/tdm (tdm)
- www.springer.com/tdm (vor)
- Locations
- Nature Materials (publishedVersion)
- PubMed (publishedVersion)
- Scholarworks@UNIST (Ulsan National Institute of Science and Technology) (submittedVersion)
- Funders
- U.S. Department of Energy (DESC0000957)
- Basic Energy Sciences
- Energy Frontier Research Centers
- Topics
- Physical Sciences › Materials Science › Materials Chemistry › Advanced Thermoelectric Materials and Devices
- Physical Sciences › Materials Science › Materials Chemistry › Thermal properties of materials
- Physical Sciences › Materials Science › Polymers and Plastics › Conducting polymers and applications
- Keywords
- organic thermoelectrics, organic semiconductors, dopant engineering, figure of merit ZT, PEDOT:PSS, PEDOT, Seebeck coefficient, electrical conductivity, carrier concentration, conducting polymers, nanostructured materials
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.