Engineered doping of organic semiconductors for enhanced thermoelectric efficiency
The DOI matches its Crossref record; 16 of the 16 references it cites were found in a registry or an index.
Abstract
Significant improvements to the thermoelectric figure of merit ZT have emerged in recent years, primarily due to the engineering of material composition and nanostructure in inorganic semiconductors (ISCs). However, many present high-ZT materials are based on low-abundance elements that pose challenges for scale-up, as they entail high material costs in addition to brittleness and difficulty in large-area deposition. Here we demonstrate a strategy to improve ZT in conductive polymers and other organic semiconductors (OSCs) for which the base elements are earth-abundant. By minimizing total dopant volume, we show that all three parameters constituting ZT vary in a manner so that ZT increases; this stands in sharp contrast to ISCs, for which these parameters have trade-offs. Reducing dopant volume is found to be as important as optimizing carrier concentration when maximizing ZT in OSCs. Implementing this strategy with the dopant poly(styrenesulphonate) in poly(3,4-ethylenedioxythiophene), we achieve ZT = 0.42 at room temperature.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Various soft conductive materials such as thin metal,[106] conductive polymers,[508] nanomaterials,[509] etc. can be thermally actuated in the form of resistors.”
From Flexible Electronics and Devices as Human–Machine Interfaces for Medical Robotics (2022) · cites this paper as [508]
Citations
Cites
Cooling, Heating, Generating Power, and Recovering Waste Heat with Thermoelectric Systems
Bell, L. E. (2008) · Science · doi:10.1126/science.1158899 · Cited by 6,082
Bubnova, O., Khan, Z. U., Malti, A., Braun, S., Fahlman, M., Berggren, M., & Crispin, X. (2011) · Nature Materials · doi:10.1038/nmat3012 · Cited by 1,769
Kim, Y. H., Sachse, C., Machala, M. L., May, C., Müller‐Meskamp, L., & Leo, K. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201002290 · Cited by 1,458
Xia, Y., Sun, K., & Ouyang, J. (2012) · Advanced Materials · doi:10.1002/adma.201104795 · Cited by 1,124
PEDOT: Principles and Applications of an Intrinsically Conductive Polymer
Elschner, A., Kirchmeyer, S., Lovenich, W., Merker, U., & Reuter, K. (2010) · CRC Press eBooks · doi:10.1201/b10318 · Cited by 758
Microscopic Understanding of the Anisotropic Conductivity of PEDOT:PSS Thin Films
Nardes, A. M., Kemerink, M., Janssen, R. A. J., Bastiaansen, J. A. M., Kiggen, N. M. M., Langeveld, B. M. W., van Breemen, A. J. J. M., & de Kok, M. M. (2007) · Advanced Materials · doi:10.1002/adma.200602575 · Cited by 539
Zhang, B., Sun, J., Katz, H. E., Fang, F., & Opila, R. L. (2010) · ACS Applied Materials & Interfaces · doi:10.1021/am100654p · Cited by 480
Microscopical Investigations of PEDOT:PSS Thin Films
Lang, U., Müller, E., Naujoks, N., & Dual, J. (2009) · Advanced Functional Materials · doi:10.1002/adfm.200801258 · Cited by 457
Poly(3,4-ethylenedioxythiophene) as promising organic thermoelectric materials: A mini-review
Yue, R., & Xu, J. (2012) · Synthetic Metals · doi:10.1016/j.synthmet.2012.04.005 · Cited by 275
Koh, Y. K., Singer, S. L., Kim, W., Zide, J. M. O., Lu, H., Cahill, D. G., Majumdar, A., & Gossard, A. C. (2009) · Journal of Applied Physics · doi:10.1063/1.3078808 · Cited by 205
Cited by
Advances in thermoelectric materials research: Looking back and moving forward
He, J., & Tritt, T. M. (2017) · Science · doi:10.1126/science.aak9997 · Cited by 2,767
Thermoelectric generators: A review of applications
Champier, D. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.02.070 · Cited by 1,424
Bio-Integrated Wearable Systems: A Comprehensive Review
Ray, T. R., Choi, J., Bandodkar, A. J., Krishnan, S., Gutruf, P., Tian, L., Ghaffari, R., & Rogers, J. A. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00573 · Cited by 1,350
Organic thermoelectric materials for energy harvesting and temperature control
Russ, B., Glaudell, A., Urban, J. J., Chabinyc, M. L., & Segalman, R. A. (2016) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.50 · Cited by 1,296
Effective Approaches to Improve the Electrical Conductivity of PEDOT:PSS: A Review
Shi, H., Liu, C., Jiang, Q., & Xu, J. (2015) · Advanced Electronic Materials · doi:10.1002/aelm.201500017 · Cited by 1,200
Stretchable Conductive Polymers and Composites Based on PEDOT and PEDOT:PSS
Kayser, L. V., & Lipomi, D. J. (2019) · Advanced Materials · doi:10.1002/adma.201806133 · Cited by 1,186
Zhang, Q., Sun, Y., Xu, W., & Zhu, D. (2014) · Advanced Materials · doi:10.1002/adma.201305371 · Cited by 999
High Performance Thermoelectric Materials: Progress and Their Applications
Yang, L., Chen, Z., Dargusch, M. S., & Zou, J. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201701797 · Cited by 958
Recent advances in thermoelectric materials
Gayner, C., & Kar, K. K. (2016) · Progress in Materials Science · doi:10.1016/j.pmatsci.2016.07.002 · Cited by 918
Smart Textiles for Electricity Generation
Chen, G., Li, Y., Bick, M., & Chen, J. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00821 · Cited by 931
Bubnova, O., Khan, Z. U., Wang, H., Braun, S., Evans, D. R., Fabretto, M., Hojati-Talemi, P., Dagnelund, D., Arlin, J.-B., Geerts, Y. H., et al. (2014) · Nature Materials · doi:10.1038/nmat3824 · Cited by 854
Smart Textile‐Integrated Microelectronic Systems for Wearable Applications
Shi, J., Liu, S., Zhang, L., Yang, B., Shu, L., Yang, Y., Ren, M., Wang, Y., Chen, J., Chen, W., et al. (2020) · Advanced Materials · doi:10.1002/adma.201901958 · Cited by 822
Recent development and application of thermoelectric generator and cooler
He, W., Zhang, G., Zhang, X., Ji, J., Li, G., & Zhao, X. (2015) · Applied Energy · doi:10.1016/j.apenergy.2014.12.075 · Cited by 816
Thermal Conductivity of Polymers and Their Nanocomposites
Xu, X., Chen, J., Zhou, J., & Li, B. (2018) · Advanced Materials · doi:10.1002/adma.201705544 · Cited by 808
Accelerating the discovery of materials for clean energy in the era of smart automation
Tabor, D. P., Roch, L. M., Saikin, S. K., Kreisbeck, C., Sheberla, D., Montoya, J. H., Dwaraknath, S., Aykol, M., Ortiz, C., Tribukait, H., et al. (2018) · Nature Reviews Materials · doi:10.1038/s41578-018-0005-z · Cited by 776
“Currently, the maximum ZT for organic materials has reached only about one-quarter of the ZT of the best inorganic materials 121 .”
BackgroundFlexible Thermoelectric Materials and Generators: Challenges and Innovations
Wang, Y., Yang, L., Shi, X., Shi, X., Chen, L., Dargusch, M. S., Zou, J., & Chen, Z. (2019) · Advanced Materials · doi:10.1002/adma.201807916 · Cited by 751
Wan, C., Gu, X., Dang, F., Itoh, T., Wang, Y., Sasaki, H., Kondo, M., Koga, K., Yabuki, K., Snyder, G. J., et al. (2015) · Nature Materials · doi:10.1038/nmat4251 · Cited by 739
Gueye, M. N., Carella, A., Faure-Vincent, J., Demadrille, R., & Simonato, J.-P. (2020) · Progress in Materials Science · doi:10.1016/j.pmatsci.2019.100616 · Cited by 682
Carbon‐Nanotube‐Based Thermoelectric Materials and Devices
Blackburn, J. L., Ferguson, A. J., Cho, C., & Grunlan, J. C. (2018) · Advanced Materials · doi:10.1002/adma.201704386 · Cited by 684
Review on application of PEDOTs and PEDOT:PSS in energy conversion and storage devices
Sun, K., Zhang, S., Li, P., Xia, Y., Zhang, X., Du, D., Isikgor, F. H., & Ouyang, J. (2015) · Journal of Materials Science: Materials in Electronics · doi:10.1007/s10854-015-2895-5 · Cited by 648
Emerging Materials and Strategies for Personal Thermal Management
Hu, R., Liu, Y., Shin, S., Huang, S., Ren, X., Shu, W., Cheng, J., Tao, G., Xu, W., Chen, R., et al. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201903921 · Cited by 638
Flexible thermoelectric materials and device optimization for wearable energy harvesting
Bahk, J.-H., Fang, H., Yazawa, K., & Shakouri, A. (2015) · Journal of Materials Chemistry C · doi:10.1039/c5tc01644d · Cited by 621
Thermoelectrics: From history, a window to the future
Beretta, D., Neophytou, N., Hodges, J. M., Kanatzidis, M. G., Narducci, D., Martin- Gonzalez, M., Beekman, M., Balke, B., Cerretti, G., Tremel, W., et al. (2019) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2018.09.001 · Cited by 606
Charge-transport model for conducting polymers
Kang, S. D., & Snyder, G. J. (2017) · Nature Materials · doi:10.1038/nmat4784 · Cited by 605
Flexible Electronics and Devices as Human–Machine Interfaces for Medical Robotics
Heng, W., Solomon, S., & Gao, W. (2022) · Advanced Materials · doi:10.1002/adma.202107902 · Cited by 609
Wearable Thermoelectric Materials and Devices for Self‐Powered Electronic Systems
Jia, Y., Jiang, Q., Sun, H., Liu, P., Hu, D., Pei, Y., Liu, W., Crispin, X., Fabiano, S., Ma, Y., et al. (2021) · Advanced Materials · doi:10.1002/adma.202102990 · Cited by 600
High-performance SnSe thermoelectric materials: Progress and future challenge
Chen, Z.-G., Shi, X., Zhao, L.-D., & Zou, J. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2018.04.005 · Cited by 597
Thermoelectric plastics: from design to synthesis, processing and structure–property relationships
Kroon, R., Mengistie, D. A., Kiefer, D., Hynynen, J., Ryan, J. D., Yu, L., & Müller, C. (2016) · Chemical Society Reviews · doi:10.1039/c6cs00149a · Cited by 577
Chen, S., Slattum, P., Wang, C., & Zang, L. (2015) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00312 · Cited by 578
Flexible thermoelectric materials and devices
Du, Y., Xu, J., Paul, B., & Eklund, P. (2018) · Applied Materials Today · doi:10.1016/j.apmt.2018.07.004 · Cited by 567
“Normally, doping and de-doping strongly affect carrier mobility, carrier density, and oxidation level, which in turn influence the electrical conductivity and Seebeck coefficient of conducting polymers [15,42,43].”
BackgroundMethodThermoelectric materials and applications for energy harvesting power generation
Petsagkourakis, I., Tybrandt, K., Crispin, X., Ohkubo, I., Satoh, N., & Mori, T. (2018) · Science and Technology of Advanced Materials · doi:10.1080/14686996.2018.1530938 · Cited by 570
“[50] After bathing the PEDOT:PSS films in DMSO and EG to remove any excess of insulating PSS, theymanaged”
MethodPourkiaei, S. M., Ahmadi, M. H., Sadeghzadeh, M., Moosavi, S., Pourfayaz, F., Chen, L., Pour Yazdi, M. A., & Kumar, R. (2019) · Energy · doi:10.1016/j.energy.2019.07.179 · Cited by 571
Thermosensitive crystallization–boosted liquid thermocells for low-grade heat harvesting
Yu, B., Duan, J., Cong, H., Xie, W., Liu, R., Zhuang, X., Wang, H., Qi, B., Xu, M., Wang, Z. L., et al. (2020) · Science · doi:10.1126/science.abd6749 · Cited by 570
Polymer Semiconductors: Synthesis, Processing, and Applications
Ding, L., Yu, Z.-D., Wang, X.-Y., Yao, Z.-F., Lu, Y., Yang, C.-Y., Wang, J.-Y., & Pei, J. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00696 · Cited by 539
Persistent and Stable Organic Radicals: Design, Synthesis, and Applications
Chen, Z. X., Li, Y., & Huang, F. (2021) · Chem · doi:10.1016/j.chempr.2020.09.024 · Cited by 537
Flexible thermoelectrics based on ductile semiconductors
Yang, Q., Yang, S., Qiu, P., Peng, L., Wei, T.-R., Zhang, Z., Shi, X., & Chen, L. (2022) · Science · doi:10.1126/science.abq0682 · Cited by 518
Solvent Additives: Key Morphology‐Directing Agents for Solution‐Processed Organic Solar Cells
McDowell, C., Abdelsamie, M., Toney, M. F., & Bazan, G. C. (2018) · Advanced Materials · doi:10.1002/adma.201707114 · Cited by 513
Energy Harvesters for Wearable and Stretchable Electronics: From Flexibility to Stretchability
Wu, H., Huang, Y., Xu, F., Duan, Y., & Yin, Z. (2016) · Advanced Materials · doi:10.1002/adma.201602251 · Cited by 520
Wearable thermoelectrics for personalized thermoregulation
Hong, S., Gu, Y., Seo, J. K., Wang, J., Liu, P., Meng, Y. S., Xu, S., & Chen, R. (2019) · Science Advances · doi:10.1126/sciadv.aaw0536 · Cited by 522
Flexible layer-structured Bi2Te3 thermoelectric on a carbon nanotube scaffold
Jin, Q., Jiang, S., Zhao, Y., Wang, D., Qiu, J., Tang, D.-M., Tan, J., Sun, D.-M., Hou, P.-X., Chen, X.-Q., et al. (2019) · Nature Materials · doi:10.1038/s41563-018-0217-z · Cited by 498
Recent advances in high-performance bulk thermoelectric materials
Shi, X., Chen, L., & Uher, C. (2016) · International Materials Reviews · doi:10.1080/09506608.2016.1183075 · Cited by 494
“42) by reducing the dopant volume.(33) PEDOT:PSS/carbon nanotubes (CNTs) nanocomposites with high electrical conductivity of ∼1000 S cm and the PF of ∼160 μ W m K at room temperature were reported as a result of the PEDOT:PSS particles decorating the surface of CNTs and connecting the CNTs electrically.”
MethodDoping Approaches for Organic Semiconductors
Scaccabarozzi, A. D., Basu, A., Aniés, F., Liu, J., Zapata-Arteaga, O., Warren, R., Firdaus, Y., Nugraha, M. I., Lin, Y., Campoy-Quiles, M., et al. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00581 · Cited by 468
A Wearable Supercapacitor Based on Conductive PEDOT:PSS‐Coated Cloth and a Sweat Electrolyte
Manjakkal, L., Pullanchiyodan, A., Yogeswaran, N., Hosseini, E. S., & Dahiya, R. (2020) · Advanced Materials · doi:10.1002/adma.201907254 · Cited by 463
Unconventional Thermoelectric Materials for Energy Harvesting and Sensing Applications
Massetti, M., Jiao, F., Ferguson, A. J., Zhao, D., Wijeratne, K., Würger, A., Blackburn, J. L., Crispin, X., & Fabiano, S. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00218 · Cited by 456
Flexible thermoelectric materials and devices: From materials to applications
Zhang, L., Shi, X.-L., Yang, Y.-L., & Chen, Z.-G. (2021) · Materials Today · doi:10.1016/j.mattod.2021.02.016 · Cited by 454
Thermoelectric Properties of PEDOT:PSS
Fan, Z., & Ouyang, J. (2019) · Advanced Electronic Materials · doi:10.1002/aelm.201800769 · Cited by 448
Fan, Z., Li, P., Du, D., & Ouyang, J. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602116 · Cited by 452
Yoo, D., Kim, J., & Kim, J. H. (2014) · Nano Research · doi:10.1007/s12274-014-0433-z · Cited by 444
“Highly conductive films using metal nanostructures [1–4], conductive polymers (CPs) [5], carbon-based materials [6], and hybrid materials [7], have attracted a great deal of attention for various applications such as transparent electrodes [8], solar cells [9], lightemitting diodes (LEDs) [8], and thermoelectric devic…”
BackgroundMethodDesigning thermoelectric generators for self-powered wearable electronics
Suarez, F., Nozariasbmarz, A., Vashaee, D., & Öztürk, M. C. (2016) · Energy & Environmental Science · doi:10.1039/c6ee00456c · Cited by 431
Jin Bae, E., Hun Kang, Y., Jang, K.-S., & Yun Cho, S. (2016) · Scientific Reports · doi:10.1038/srep18805 · Cited by 431
Skutterudites as thermoelectric materials: revisited
Rull-Bravo, M., Moure, A., Fernández, J. F., & Martín-González, M. (2015) · RSC Advances · doi:10.1039/c5ra03942h · Cited by 423
Solution processed organic thermoelectrics: towards flexible thermoelectric modules
Chen, Y., Zhao, Y., & Liang, Z. (2015) · Energy & Environmental Science · doi:10.1039/c4ee03297g · Cited by 428
Review of current high-ZT thermoelectric materials
Wei, J., Yang, L., Ma, Z., Song, P., Zhang, M., Ma, J., Yang, F., & Wang, X. (2020) · Journal of Materials Science · doi:10.1007/s10853-020-04949-0 · Cited by 413
New trends, strategies and opportunities in thermoelectric materials: A perspective
Liu, W., Hu, J., Zhang, S., Deng, M., Han, C.-G., & Liu, Y. (2017) · Materials Today Physics · doi:10.1016/j.mtphys.2017.06.001 · Cited by 414
Toward High Performance n-Type Thermoelectric Materials by Rational Modification of BDPPV Backbones
Shi, K., Zhang, F., Di, C.-A., Yan, T.-W., Zou, Y., Zhou, X., Zhu, D., Wang, J.-Y., & Pei, J. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b00945 · Cited by 421
Chemical doping of organic semiconductors for thermoelectric applications
Zhao, W., Ding, J., Zou, Y., Di, C.-A., & Zhu, D. (2020) · Chemical Society Reviews · doi:10.1039/d0cs00204f · Cited by 407
Schlitz, R. A., Brunetti, F. G., Glaudell, A. M., Miller, P. L., Brady, M. A., Takacs, C. J., Hawker, C. J., & Chabinyc, M. L. (2014) · Advanced Materials · doi:10.1002/adma.201304866 · Cited by 405
Stretchable fabric generates electric power from woven thermoelectric fibers
Sun, T., Zhou, B., Zheng, Q., Wang, L., Jiang, W., & Snyder, G. J. (2020) · Nature Communications · doi:10.1038/s41467-020-14399-6 · Cited by 390
Zhou, W., Fan, Q., Zhang, Q., Cai, L., Li, K., Gu, X., Yang, F., Zhang, N., Wang, Y., Liu, H., et al. (2017) · Nature Communications · doi:10.1038/ncomms14886 · Cited by 385
Conductive polymers for thermoelectric power generation
Bharti, M., Singh, A., Samanta, S., & Aswal, D. K. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.09.004 · Cited by 368
Yao, Q., Wang, Q., Wang, L., & Chen, L. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01905a · Cited by 356
Fiber‐Based Energy Conversion Devices for Human‐Body Energy Harvesting
Huang, L., Lin, S., Xu, Z., Zhou, H., Duan, J., Hu, B., & Zhou, J. (2020) · Advanced Materials · doi:10.1002/adma.201902034 · Cited by 349
The Crystallization of PEDOT:PSS Polymeric Electrodes Probed In Situ during Printing
Palumbiny, C. M., Liu, F., Russell, T. P., Hexemer, A., Wang, C., & Müller‐Buschbaum, P. (2015) · Advanced Materials · doi:10.1002/adma.201500315 · Cited by 336
Realising the potential of thermoelectric technology: a Roadmap
Freer, R., & Powell, A. V. (2020) · Journal of Materials Chemistry C · doi:10.1039/c9tc05710b · Cited by 329
Tailored semiconducting carbon nanotube networks with enhanced thermoelectric properties
Avery, A. D., Zhou, B. H., Lee, J., Lee, E.-S., Miller, E. M., Ihly, R., Wesenberg, D., Mistry, K. S., Guillot, S. L., Zink, B. L., et al. (2016) · Nature Energy · doi:10.1038/nenergy.2016.33 · Cited by 334
“PFO-BPy selects large-diameter tubes with no preference for particular chiralities, PFH-A selects near-armchair s-SWCNTs and disperses a much narrower chirality distribution, and PFO selects only (7,5) tubes from the SG65i material even though the precursor material is predominantly composed of (6,5) s-SWCNTs.”
Emerging Indoor Photovoltaic Technologies for Sustainable Internet of Things
Pecunia, V., Occhipinti, L. G., & Hoye, R. L. Z. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202100698 · Cited by 322
A practical field guide to thermoelectrics: Fundamentals, synthesis, and characterization
Zevalkink, A., Smiadak, D. M., Blackburn, J. L., Ferguson, A. J., Chabinyc, M. L., Delaire, O., Wang, J., Kovnir, K., Martin, J., Schelhas, L. T., et al. (2018) · Applied Physics Reviews · doi:10.1063/1.5021094 · Cited by 323
Xu, S., Shi, X.-L., Dargusch, M., Di, C., Zou, J., & Chen, Z.-G. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2021.100840 · Cited by 315
Organic Thermoelectrics: Materials Preparation, Performance Optimization, and Device Integration
Wang, H., & Yu, C. (2019) · Joule · doi:10.1016/j.joule.2018.10.012 · Cited by 320
Enhanced thermoelectric properties of PEDOT:PSS nanofilms by a chemical dedoping process
Park, H., Lee, S. H., Kim, F. S., Choi, H. H., Cheong, I. W., & Kim, J. H. (2014) · J. Mater. Chem. A · doi:10.1039/c3ta14960a · Cited by 318
Flexible thermoelectrics: from silver chalcogenides to full-inorganic devices
Liang, J., Wang, T., Qiu, P., Yang, S., Ming, C., Chen, H., Song, Q., Zhao, K., Wei, T.-R., Ren, D., et al. (2019) · Energy & Environmental Science · doi:10.1039/c9ee01777a · Cited by 324
Thermoelectric Fabrics: Toward Power Generating Clothing
Du, Y., Cai, K., Chen, S., Wang, H., Shen, S. Z., Donelson, R., & Lin, T. (2015) · Scientific Reports · doi:10.1038/srep06411 · Cited by 312
Thermal Conductivity and Elastic Constants of PEDOT:PSS with High Electrical Conductivity
Liu, J., Wang, X., Li, D., Coates, N. E., Segalman, R. A., & Cahill, D. G. (2015) · Macromolecules · doi:10.1021/ma502099t · Cited by 308
Thermoelectric Properties of Solution‐Processed n‐Doped Ladder‐Type Conducting Polymers
Wang, S., Sun, H., Ail, U., Vagin, M., Persson, P. O. Å., Andreasen, J. W., Thiel, W., Berggren, M., Crispin, X., Fazzi, D., et al. (2016) · Advanced Materials · doi:10.1002/adma.201603731 · Cited by 313
Enhancing Molecular n‐Type Doping of Donor–Acceptor Copolymers by Tailoring Side Chains
Liu, J., Qiu, L., Alessandri, R., Qiu, X., Portale, G., Dong, J., Talsma, W., Ye, G., Sengrian, A. A., Souza, P. C. T., et al. (2018) · Advanced Materials · doi:10.1002/adma.201704630 · Cited by 310
Heavily n-Dopable π-Conjugated Redox Polymers with Ultrafast Energy Storage Capability
Liang, Y., Chen, Z., Jing, Y., Rong, Y., Facchetti, A., & Yao, Y. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b02290 · Cited by 306
Simple Salt‐Coordinated n‐Type Nanocarbon Materials Stable in Air
Nonoguchi, Y., Nakano, M., Murayama, T., Hagino, H., Hama, S., Miyazaki, K., Matsubara, R., Nakamura, M., & Kawai, T. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201600179 · Cited by 305
Recent advances in flexible organic light-emitting diodes
Xu, R.-P., Li, Y.-Q., & Tang, J.-X. (2016) · Journal of Materials Chemistry C · doi:10.1039/c6tc03230c · Cited by 307
Aswal, D. K., Basu, R., & Singh, A. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.01.065 · Cited by 294
Wang, L., Zhang, Z., Liu, Y., Wang, B., Fang, L., Qiu, J., Zhang, K., & Wang, S. (2018) · Nature Communications · doi:10.1038/s41467-018-06251-9 · Cited by 295
Self-citationProgress of Photodetectors Based on the Photothermoelectric Effect
Lu, X., Sun, L., Jiang, P., & Bao, X. (2019) · Advanced Materials · doi:10.1002/adma.201902044 · Cited by 296
Erickson, K. J., Léonard, F., Stavila, V., Foster, M. E., Spataru, C. D., Jones, R. E., Foley, B. M., Hopkins, P. E., Allendorf, M. D., & Talin, A. A. (2015) · Advanced Materials · doi:10.1002/adma.201501078 · Cited by 294
Polymer based thermoelectric nanocomposite materials and devices: Fabrication and characteristics
Nandihalli, N., Liu, C.-J., & Mori, T. (2020) · Nano Energy · doi:10.1016/j.nanoen.2020.105186 · Cited by 293
Polymer Composites for Thermoelectric Applications
McGrail, B. T., Sehirlioglu, A., & Pentzer, E. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201408431 · Cited by 287
Prunet, G., Pawula, F., Fleury, G., Cloutet, E., Robinson, A. J., Hadziioannou, G., & Pakdel, A. (2021) · Materials Today Physics · doi:10.1016/j.mtphys.2021.100402 · Cited by 286
“demonstrated how high boiling point solvents, such as ethylene glycol (EG) and dimethyl sulfoxide (DMSO), favorably influence the PEDOT:PSS thermoelectric properties [83].”
BackgroundJu, H., & Kim, J. (2016) · ACS Nano · doi:10.1021/acsnano.5b07355 · Cited by 286
“and ~33 μW/m·K(2), respectively) for PEDOT:PSS after a treatment with dimethyl sulfoxide (DMSO).(12) The electrical conductivity and power factor of PEDOT:PSS thin films prepared by the DMSO post-treatment method can be enhanced up to ~930 S/cm and 30.”
MethodOh, J. Y., Lee, J. H., Han, S. W., Chae, S. S., Bae, E. J., Kang, Y. H., Choi, W. J., Cho, S. Y., Lee, J.-O., Baik, H. K., et al. (2016) · Energy & Environmental Science · doi:10.1039/c5ee03813h · Cited by 289
A review of solar photovoltaic-thermoelectric hybrid system for electricity generation
Li, G., Shittu, S., Diallo, T. M. O., Yu, M., Zhao, X., & Ji, J. (2018) · Energy · doi:10.1016/j.energy.2018.06.021 · Cited by 281
“4) [25] at room temperature can be used.”
BackgroundHalide Perovskites: Thermal Transport and Prospects for Thermoelectricity
Haque, M. A., Kee, S., Villalva, D. R., Ong, W., & Baran, D. (2020) · Advanced Science · doi:10.1002/advs.201903389 · Cited by 270
Yan, X., Xiong, M., Li, J.-T., Zhang, S., Chase, Z. A., Lu, Y., Wang, Z.-Y., Yao, Z.-F., Wang, J.-Y., Gu, X., et al. (2019) · Journal of the American Chemical Society · doi:10.1021/jacs.9b10107 · Cited by 268
Culebras, M., Gómez, C. M., & Cantarero, A. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta01012d · Cited by 266
An Organic Mixed Ion–Electron Conductor for Power Electronics
Malti, A., Edberg, J., Granberg, H., Khan, Z. U., Andreasen, J. W., Liu, X., Zhao, D., Zhang, H., Yao, Y., Brill, J. W., et al. (2016) · Advanced Science · doi:10.1002/advs.201500305 · Cited by 264
Huang, D., Yao, H., Cui, Y., Zou, Y., Zhang, F., Wang, C., Shen, H., Jin, W., Zhu, J., Diao, Y., et al. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b05344 · Cited by 267
Lim, E., Peterson, K. A., Su, G. M., & Chabinyc, M. L. (2018) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b04849 · Cited by 258
Zhou, J., Anjum, D. H., Chen, L., Xu, X., Ventura, I. A., Jiang, L., & Lubineau, G. (2014) · J. Mater. Chem. C · doi:10.1039/c4tc01593b · Cited by 257
Elastic conducting polymer composites in thermoelectric modules
Kim, N., Lienemann, S., Petsagkourakis, I., Alemu Mengistie, D., Kee, S., Ederth, T., Gueskine, V., Leclère, P., Lazzaroni, R., Crispin, X., et al. (2020) · Nature Communications · doi:10.1038/s41467-020-15135-w · Cited by 258
Du, F.-P., Cao, N.-N., Zhang, Y.-F., Fu, P., Wu, Y.-G., Lin, Z.-D., Shi, R., Amini, A., & Cheng, C. (2018) · Scientific Reports · doi:10.1038/s41598-018-24632-4 · Cited by 242
Sun, Y., Qiu, L., Tang, L., Geng, H., Wang, H., Zhang, F., Huang, D., Xu, W., Yue, P., Guan, Y., et al. (2016) · Advanced Materials · doi:10.1002/adma.201505922 · Cited by 255
Du, Y., Cai, K. F., Chen, S., Cizek, P., & Lin, T. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am5002772 · Cited by 251
Recent advances in organic polymer thermoelectric composites
Chen, G., Xu, W., & Zhu, D. (2017) · Journal of Materials Chemistry C · doi:10.1039/c6tc05488a · Cited by 252
Metadata
- Authors
- Kim, G.-H., Shao, L., Zhang, K., & Pipe, K. P.
- Affiliations
- University of Michigan (US)
- Corresponding author
- Pipe, K. P.
- ORCID
- Venue
- Nature Materials
- Published
- 2013-05-05
- Volume
- 12
- Issue
- 8
- Pages
- 719-723
- ISSN
- 1476-1122 (ISSN-L)
- 1476-4660
- OpenAlex
- W2001566902
- Cited by
- 1,688
- References
- 16
- Citations by year
- 2026: 65 · 2025: 90 · 2024: 106 · 2023: 115 · 2022: 120 · 2021: 187 · 2020: 172 · 2019: 178 · 2018: 160 · 2017: 147 · 2016: 155 · 2015: 113 · 2014: 69 · 2013: 11
- FWCI
- 52.38
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.springer.com/tdm (tdm)
- www.springer.com/tdm (vor)
- Locations
- Nature Materials (publishedVersion)
- PubMed (publishedVersion)
- Scholarworks@UNIST (Ulsan National Institute of Science and Technology) (submittedVersion)
- Funders
- U.S. Department of Energy (DESC0000957)
- Basic Energy Sciences
- Energy Frontier Research Centers
- Topics
- Physical Sciences › Materials Science › Materials Chemistry › Advanced Thermoelectric Materials and Devices
- Physical Sciences › Materials Science › Materials Chemistry › Thermal properties of materials
- Physical Sciences › Materials Science › Polymers and Plastics › Conducting polymers and applications
- Keywords
- organic thermoelectrics, organic semiconductors, dopant engineering, figure of merit ZT, PEDOT:PSS, PEDOT, Seebeck coefficient, electrical conductivity, carrier concentration, conducting polymers, nanostructured materials
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.