Engineered doping of organic semiconductors for enhanced thermoelectric efficiency
The DOI matches its Crossref record; 16 of the 16 references it cites were found in a registry or an index.
Abstract
Significant improvements to the thermoelectric figure of merit ZT have emerged in recent years, primarily due to the engineering of material composition and nanostructure in inorganic semiconductors (ISCs). However, many present high-ZT materials are based on low-abundance elements that pose challenges for scale-up, as they entail high material costs in addition to brittleness and difficulty in large-area deposition. Here we demonstrate a strategy to improve ZT in conductive polymers and other organic semiconductors (OSCs) for which the base elements are earth-abundant. By minimizing total dopant volume, we show that all three parameters constituting ZT vary in a manner so that ZT increases; this stands in sharp contrast to ISCs, for which these parameters have trade-offs. Reducing dopant volume is found to be as important as optimizing carrier concentration when maximizing ZT in OSCs. Implementing this strategy with the dopant poly(styrenesulphonate) in poly(3,4-ethylenedioxythiophene), we achieve ZT = 0.42 at room temperature.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Various soft conductive materials such as thin metal,[106] conductive polymers,[508] nanomaterials,[509] etc. can be thermally actuated in the form of resistors.”
From Flexible Electronics and Devices as Human–Machine Interfaces for Medical Robotics (2022) · cites this paper as [508]
Citations
Cites
Cooling, Heating, Generating Power, and Recovering Waste Heat with Thermoelectric Systems
Bell, L. E. (2008) · Science · doi:10.1126/science.1158899 · Cited by 6,082
Bubnova, O., Khan, Z. U., Malti, A., Braun, S., Fahlman, M., Berggren, M., & Crispin, X. (2011) · Nature Materials · doi:10.1038/nmat3012 · Cited by 1,769
Kim, Y. H., Sachse, C., Machala, M. L., May, C., Müller‐Meskamp, L., & Leo, K. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201002290 · Cited by 1,458
Xia, Y., Sun, K., & Ouyang, J. (2012) · Advanced Materials · doi:10.1002/adma.201104795 · Cited by 1,124
PEDOT: Principles and Applications of an Intrinsically Conductive Polymer
Elschner, A., Kirchmeyer, S., Lovenich, W., Merker, U., & Reuter, K. (2010) · CRC Press eBooks · doi:10.1201/b10318 · Cited by 758
Microscopic Understanding of the Anisotropic Conductivity of PEDOT:PSS Thin Films
Nardes, A. M., Kemerink, M., Janssen, R. A. J., Bastiaansen, J. A. M., Kiggen, N. M. M., Langeveld, B. M. W., van Breemen, A. J. J. M., & de Kok, M. M. (2007) · Advanced Materials · doi:10.1002/adma.200602575 · Cited by 539
Zhang, B., Sun, J., Katz, H. E., Fang, F., & Opila, R. L. (2010) · ACS Applied Materials & Interfaces · doi:10.1021/am100654p · Cited by 480
Microscopical Investigations of PEDOT:PSS Thin Films
Lang, U., Müller, E., Naujoks, N., & Dual, J. (2009) · Advanced Functional Materials · doi:10.1002/adfm.200801258 · Cited by 457
Poly(3,4-ethylenedioxythiophene) as promising organic thermoelectric materials: A mini-review
Yue, R., & Xu, J. (2012) · Synthetic Metals · doi:10.1016/j.synthmet.2012.04.005 · Cited by 275
Koh, Y. K., Singer, S. L., Kim, W., Zide, J. M. O., Lu, H., Cahill, D. G., Majumdar, A., & Gossard, A. C. (2009) · Journal of Applied Physics · doi:10.1063/1.3078808 · Cited by 205
Cited by
Items 501–600 of 1,000
Thermoelectric Tin Selenide: The Beauty of Simplicity
Zhang, H., & Talapin, D. V. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201405683 · Cited by 53
Investigation of the thermoelectric response in conducting polymers doped by solid-state diffusion
Kang, K., Schott, S., Venkateshvaran, D., Broch, K., Schweicher, G., Harkin, D., Jellett, C., Nielsen, C. B. O., McCulloch, I. A., & Sirringhaus, H. (2019) · Materials Today Physics · doi:10.1016/j.mtphys.2019.02.004 · Cited by 53
Kochergin, Y. S., Villa, K., Novotný, F., Plutnar, J., Bojdys, M. J., & Pumera, M. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202002701 · Cited by 53
Yoon, S. E., Park, J., Kwon, J. E., Lee, S. Y., Han, J. M., Go, C. Y., Choi, S., Kim, K. C., Seo, H., Kim, J. H., et al. (2020) · Advanced Materials · doi:10.1002/adma.202005129 · Cited by 53
Zhu, Q., Yıldırım, E., Wang, X., Kyaw, A. K. K., Tang, T., Soo, X. Y. D., Wong, Z. M., Wu, G., Yang, S., & Xu, J. (2020) · Molecular Systems Design & Engineering · doi:10.1039/d0me00032a · Cited by 52
Alsufyani, M., Stoeckel, M., Chen, X., Thorley, K. J., Hallani, R. K., Puttisong, Y., Ji, X., Meli, D., Paulsen, B. D., Strzalka, J. W., et al. (2021) · Angewandte Chemie International Edition · doi:10.1002/anie.202113078 · Cited by 52
Liang, J., Zhang, X., & Wan, C. (2022) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.2c16338 · Cited by 52
Du, M., Wen, Y., Chen, Z., Xu, Y., Qin, J., Cheng, H., Du, Y., Zhang, K., Shin, S., & Ouyang, J. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202411815 · Cited by 56
Self-citationZhao, L., Sun, X., Lei, Z., Zhao, J., Wu, J., Li, Q., & Zhang, A. (2015) · Composites Part B Engineering · doi:10.1016/j.compositesb.2015.08.063 · Cited by 52
Horike, S., Fukushima, T., Saito, T. H., Kuchimura, T., Koshiba, Y., Morimoto, M., & Ishida, K. (2017) · Molecular Systems Design & Engineering · doi:10.1039/c7me00063d · Cited by 52
Unexpectedly high cross-plane thermoelectric performance of layered carbon nitrides
Ding, Z., An, M., Mo, S., Yu, X., Jin, Z., Liao, Y., Esfarjani, K., Lü, J., Shiomi, J., & Yang, N. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta10500f · Cited by 53
Flexible Bi–Te-based alloy nanosheet/PEDOT:PSS thermoelectric power generators
Du, Y., Liu, X., Xu, J., & Shen, S. (2019) · Materials Chemistry Frontiers · doi:10.1039/c9qm00087a · Cited by 52
The role of absorbed water in ionic liquid cellulosic electrolytes for ionic thermoelectrics
Zhao, D., Sultana, A., Edberg, J., Chaharsoughi, M. S., ElMahmoudy, M., Ail, U., Tybrandt, K., & Xavier Crispin, A. (2021) · Journal of Materials Chemistry C · doi:10.1039/d1tc04466d · Cited by 52
Flexible Thermoelectric Polymer Composites Based on a Carbon Nanotubes Forest
Yusupov, K., Stumpf, S., You, S., Bogach, A., Martínez, P., Zakhidov, A. A., Schubert, U. S., Khovaylo, V. V., & Vomiero, A. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201801246 · Cited by 51
Qu, S., Chen, M., Qiu, P., Xu, K., Xu, Q., Yao, Q., Lu, P., Zeng, H., Shi, X., & Chen, L. (2021) · Energy & Environmental Science · doi:10.1039/d1ee02552j · Cited by 51
Alam, J., Xu, X. C., Adu, P. C. O., Meng, Q., Zuber, K., Shahraam Afshar, V., Kuan, H., & Ma, J. (2023) · Advanced Nanocomposites · doi:10.1016/j.adna.2023.08.001 · Cited by 51
PEDOT-based thermoelectric nanocomposites – A mini-review
Li, Y., Du, Y., Dou, Y., Cai, K., & Xu, J. (2017) · Synthetic Metals · doi:10.1016/j.synthmet.2017.02.007 · Cited by 51
Choi, H., Kim, S. J., Kim, Y., We, J. H., Oh, M., & Cho, B. J. (2017) · Journal of Materials Chemistry C · doi:10.1039/c7tc01797a · Cited by 52
Carbon Nanotube/Cellulose Acetate Thermoelectric Papers
Mo, J.-H., Kim, J.-Y., Kang, Y. H., Cho, S. Y., & Jang, K. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b03670 · Cited by 51
Solution-Processed Carbon Nanotube Buckypapers for Foldable Thermoelectric Generators
Kim, S., Mo, J.-H., & Jang, K. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b10335 · Cited by 51
Zhu, Q., Yıldırım, E., Wang, X., Soo, X. Y. D., Zheng, Y., Tan, T. L., Wu, G., Yang, S., & Xu, J. (2019) · Frontiers in Chemistry · doi:10.3389/fchem.2019.00783 · Cited by 52
“TE materials, given their advantages, such as tunable electric conductivity and low thermal conductivity (Choy, 1977; Kim et al., 2013; Park et al., 2013).”
BackgroundAslan, F., Esen, H., & YAKUPHANOĞLU, F. (2019) · Silicon · doi:10.1007/s12633-019-00306-2 · Cited by 51
“Organic doped semiconductors come into prominence on photovoltaic and sensor applications due to their ability to absorb light well and the photogenerated electrons [22, 23].”
BackgroundTian, Y., Ren, G., Wei, Z., Zheng, Z., Deng, S., Ma, L., Li, Y., Zhou, Z., Chen, X., Shi, Y. C., et al. (2024) · Renewable Energy · doi:10.1016/j.renene.2024.120443 · Cited by 50
Enhanced thermoelectric properties of PEDOT:PSS films via a novel two-step treatment
Zhang, L., Deng, H., Liu, S., Zhang, Q., Chen, F., & Fu, Q. (2015) · RSC Advances · doi:10.1039/c5ra22240k · Cited by 50
Thermal transport in organic semiconductors
Wang, X., Wang, W., Yang, C. Q., Han, D., Fan, H., & Zhang, J. (2021) · Journal of Applied Physics · doi:10.1063/5.0062074 · Cited by 53
Feng, K., Yang, W., Jeong, S. Y., Ma, S., Li, Y., Wang, J., Wang, Y., Woo, H. Y., Chan, P. K. L., Wang, G., et al. (2023) · Advanced Materials · doi:10.1002/adma.202210847 · Cited by 49
Ionic thermoelectric materials: Innovations and challenges
Jia, S., Qian, W., Yu, P., Li, K., Li, M., Lan, J., Lin, Y., & Yang, X. (2024) · Materials Today Physics · doi:10.1016/j.mtphys.2024.101375 · Cited by 49
Organic Thermoelectric Devices for Energy Harvesting and Sensing Applications
Ji, Z., Li, Z., Liu, L., Zou, Y., Di, C., & Zhu, D. (2024) · Advanced Materials Technologies · doi:10.1002/admt.202302128 · Cited by 51
Yousefian, H., Babaei‐Ghazvini, A., Isari, A. A., Hashemi, S. A., Acharya, B., Ghaffarkhah, A., & Arjmand, M. (2024) · Surfaces and Interfaces · doi:10.1016/j.surfin.2024.104481 · Cited by 49
Wang, Y., Cai, K., Chen, S., Shen, S., & Yao, X. (2014) · Journal of Nanoparticle Research · doi:10.1007/s11051-014-2531-y · Cited by 49
Yoo, D., Lee, J. J., Park, C., Choi, H. H., & Kim, J. (2016) · RSC Advances · doi:10.1039/c6ra02334g · Cited by 49
Saxena, N., Čorić, M., Greppmair, A., Wernecke, J., Pflüger, M., Krumrey, M. K., Brandt, M. S., Herzig, E. M., & Müller‐Buschbaum, P. (2017) · Advanced Electronic Materials · doi:10.1002/aelm.201700181 · Cited by 49
Mat-like flexible thermoelectric system based on rigid inorganic bulk materials
Park, H., Kim, D.-G., Eom, Y., Wijethunge, D., Hwang, J., Kim, H., & Kim, W. (2017) · Journal of Physics D Applied Physics · doi:10.1088/1361-6463/aa94f7 · Cited by 50
Choi, K., Kim, S. L., Yi, S., Hsu, J., & Yu, C. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b06850 · Cited by 49
Recent Progress in Flexible Organic Thermoelectrics
Culebras, M., Choi, K., & Cho, C. (2018) · Micromachines · doi:10.3390/mi9120638 · Cited by 49
“investigated TE properties of PEDOT nanowire/PEDOT hybrids where PEDOT nanowires synthesized by template-confined in situ polymerization were incorporated into PEDOT:PSS and PDOT:tosylate (Tos), respectively [30].”
MethodRoom-Temperature Welding of Silver Telluride Nanowires for High-Performance Thermoelectric Film
Zeng, X., Ren, L., Xie, J., Mao, D., Wang, M., Zeng, X., Du, G., Sun, R., Xu, J., & Wong, C. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b14854 · Cited by 49
Khan, S. A., Kim, J., Acharya, S., & Kim, W. (2021) · Applied Physics Letters · doi:10.1063/5.0049347 · Cited by 50
Zhou, Y., Xu, Y., Yao, Z., Li, J., Pan, C., Lu, Y. M., Yang, C., Ding, L., Xiao, B., Wang, X., et al. (2023) · Nature Communications · doi:10.1038/s41467-023-39133-w · Cited by 48
Du, M., Ouyang, J., & Zhang, K. (2023) · Journal of Materials Chemistry A · doi:10.1039/d3ta02876c · Cited by 48
Self-citationThermoelectric and electrical transport properties of Mg 2 Si multi-doped with Sb, Al and Zn
Zhao, J., Liu, Z., Reid, J. W., Takarabe, K., Iida, T., Wang, B., Yoshiya, U., & Tse, J. S. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta03751d · Cited by 48
Empirical modeling of dopability in diamond-like semiconductors
Miller, S. A., Dylla, M. T., Anand, S., Gordiz, K., Snyder, G. J., & Toberer, E. S. (2018) · npj Computational Materials · doi:10.1038/s41524-018-0123-6 · Cited by 50
Flexible thermoelectric films with high power factor made of non-oxidized graphene flakes
Novak, T. G., Kim, J., Kim, J., Shin, H., Tiwari, A. P., Song, J. Y., & Jeon, S. (2019) · 2D Materials · doi:10.1088/2053-1583/ab2c32 · Cited by 48
Yu, X., Li, R., Shiga, T., Feng, L., An, M., Zhang, L., Shiomi, J., & Yang, N. (2019) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.9b09105 · Cited by 48
Insulating polymers for flexible thermoelectric composites: A multi-perspective review
Han, S., Chen, S., & Jiao, F. (2021) · Composites Communications · doi:10.1016/j.coco.2021.100914 · Cited by 48
Wei, Q., Mukaida, M., Kirihara, K., Naitoh, Y., & Ishida, T. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b10453 · Cited by 48
Elastic thermoelectric sponge for pressure-induced enhancement of power generation
Kim, J., Bae, E. J., Kang, Y. H., Lee, C., & Cho, S. Y. (2020) · Nano Energy · doi:10.1016/j.nanoen.2020.104824 · Cited by 47
Jiang, K., Hong, S., Tung, S., & Liu, C. (2022) · Journal of Materials Chemistry A · doi:10.1039/d2ta05134f · Cited by 47
Shi, J., Wu, X., Geng, X., Hu, L., Liu, F., Ao, W., & Zhang, C. (2023) · Chemical Engineering Journal · doi:10.1016/j.cej.2023.141450 · Cited by 47
Ichikawa, S., & Toshima, N. (2015) · Polymer Journal · doi:10.1038/pj.2015.28 · Cited by 47
Mendels, D., & Tessler, N. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz5016058 · Cited by 47
Wang, X., Parrish, K. D., Malen, J. A., & Chan, P. K. L. (2015) · Scientific Reports · doi:10.1038/srep16095 · Cited by 47
Soft PEDOT:PSS aerogel architectures for thermoelectric applications
Gordon, M. P., Zaia, E. W., Zhou, P., Russ, B., Coates, N. E., Sahu, A., & Urban, J. J. (2016) · Journal of Applied Polymer Science · doi:10.1002/app.44070 · Cited by 47
Wang, X., Meng, F., Tang, H., Gao, Z., Li, S., Jiang, F., & Xu, J. (2017) · Journal of Materials Science · doi:10.1007/s10853-017-1166-7 · Cited by 47
Wolfe, R. M. W., Menon, A. K., Fletcher, T. R., Marder, S. R., Reynolds, J. R., & Yee, S. K. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201803275 · Cited by 47
Kang, Y. H., Lee, U.-H., Jung, I. H., Yoon, S. C., & Cho, S. Y. (2019) · ACS Applied Electronic Materials · doi:10.1021/acsaelm.9b00224 · Cited by 47
Enhanced Fluorescence for Bioassembly by Environment‐Switching Doping of Metal Ions
Tao, K., Chen, Y., Orr, A. A., Tian, Z., Makam, P., Gilead, S., Si, M., Rencus‐Lazar, S., Qu, S., Zhang, M., et al. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201909614 · Cited by 48
Non-Wiedemann-Franz behavior of the thermal conductivity of organic semiconductors
Scheunemann, D., & Kemerink, M. (2020) · Physical review. B./Physical review. B · doi:10.1103/physrevb.101.075206 · Cited by 47
“[11] when taking into account κlat ≈ 0.”
BackgroundEl-Shamy, A. G. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.129212 · Cited by 47
Lee, T., Lee, J., Park, K. T., Kim, J.-S., Park, C. R., & Kim, H. (2021) · ACS Nano · doi:10.1021/acsnano.1c02508 · Cited by 47
Role of Dopants in Organic and Halide Perovskite Energy Conversion Devices
Haque, M. A., Villalva, D. R., Hernandez, L. H., Tounesi, R., Jang, S., & Baran, D. (2021) · Chemistry of Materials · doi:10.1021/acs.chemmater.1c01867 · Cited by 47
Jenisha, M. A., Kavirajan, S., Harish, S., Archana, J., Kamalabharathi, K., Kumar, E. S., & NAVANEETHAN, M. (2021) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2021.162493 · Cited by 47
Self-Organization of PEDOT:PSS Induced by Green and Water-Soluble Organic Molecules
Yıldırım, E., Zhu, Q., Wu, G., Tan, T. L., Xu, J., & Yang, S. (2019) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.9b01716 · Cited by 46
Conductive PEDOT:PSS-Based Organic/Inorganic Flexible Thermoelectric Films and Power Generators
Park, D., Kim, M., & Kim, J. (2021) · Polymers · doi:10.3390/polym13020210 · Cited by 46
“This is because the improved technology mentioned above generally reduces the Seebeck coefficient by moving the Fermi level to the edge of the conductor [29].”
BackgroundOlorunyomi, J. F., Dyett, B., Murdoch, B. J., Ahmed, A. J., Rosengarten, G., Caruso, R. A., Doherty, C. M., & Mulet, X. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202403644 · Cited by 46
Thermoelectricity in Molecular Tunnel Junctions.
He, P., Jang, J., Kang, H., & Yoon, H. (2025) · Chemical Reviews · doi:10.1021/acs.chemrev.4c00886 · Cited by 37
Taroni, P. J., Hoces, I., Stingelin, N., Heeney, M., & Bilotti, E. (2014) · Israel Journal of Chemistry · doi:10.1002/ijch.201400037 · Cited by 46
“Page 18 of 32 Another high performance result was reported for PEDOT/PSS by Kim et al (2013), with an impressive ZTRT of 0.42.”
BackgroundInfluentialEndrődi, B., Mellár, J., Gingl, Z., Visy, C., & Janáky, C. (2015) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.5b00135 · Cited by 46
Chen, Z., Brown, J., Drees, M., Seger, M., Hu, Y., Yu, X., Boudinet, D., McCray, M., Delferro, M., Marks, T. J., et al. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b02813 · Cited by 46
Sun, X., Wei, Y., Li, J., Zhao, J., Zhao, L., & Li, Q. (2017) · Science China Materials · doi:10.1007/s40843-016-5132-8 · Cited by 46
Composite of polyaniline‐bismuth selenide with enhanced thermoelectric performance
Mitra, M., Kulsi, C., Kargupta, K., Ganguly, S., & Banerjee, D. (2018) · Journal of Applied Polymer Science · doi:10.1002/app.46887 · Cited by 46
Zong, P., Zhang, P., Yin, S., Huang, Y., Wang, Y., & Wan, C. (2019) · Advanced Electronic Materials · doi:10.1002/aelm.201800842 · Cited by 46
Guo, J., Li, G., Reith, H., Jiang, L., Wang, M., Li, Y., Wang, X., Zeng, Z., Zhao, H., Lu, X., et al. (2020) · Advanced Electronic Materials · doi:10.1002/aelm.201900945 · Cited by 46
A low-cost printed organic thermoelectric generator for low-temperature energy harvesting
Shakeel, M., Rehman, K., Ahmad, S., Amin, M., Nadeem, I., & Khan, A. (2020) · Renewable Energy · doi:10.1016/j.renene.2020.11.158 · Cited by 46
Recent Advances in Flexible Perovskite Light‐Emitting Diodes
Jia, P., Lu, M., Sun, S., Gao, Y., Wang, R., Zhao, X., Sun, G., Colvin, V. L., & Yu, W. W. (2021) · Advanced Materials Interfaces · doi:10.1002/admi.202100441 · Cited by 47
Molecular Doping Efficiency in Organic Semiconductors: Fundamental Principle and Promotion Strategy
Yan, H., & Ma, W. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202111351 · Cited by 46
Ballistic thermoelectric properties in double-bend graphene nanoribbons
Li, K.-M., Xie, Z.-X., Su, K., Luo, W., & Zhang, Y. (2014) · Physics Letters A · doi:10.1016/j.physleta.2014.03.021 · Cited by 45
Min, J., Im, J., Kim, S. H., Choi, H. H., & Cho, K. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202212825 · Cited by 45
Lee, C.-Y., Lin, Y., Hong, S., Wang, C., Jeng, U., Tung, S., & Liu, C. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c09934 · Cited by 45
A Route Towards Sustainability Through Engineered Polymeric Interfaces
Reeja‐Jayan, B., Kováčik, P., Yang, R., Sojoudi, H., Ugur, A., Kim, D. H., Petruczok, C. D., Wang, X., Liu, A., & Gleason, K. K. (2014) · Advanced Materials Interfaces · doi:10.1002/admi.201400117 · Cited by 45
Wang, J., Cai, K., Yin, J., & Shen, S. (2016) · Synthetic Metals · doi:10.1016/j.synthmet.2016.11.031 · Cited by 45
Nakano, M., Nakashima, T., Kawai, T., & Nonoguchi, Y. (2017) · Small · doi:10.1002/smll.201700804 · Cited by 45
Zhou, Y. L., Wan, J., Li, Q., Chen, L., Zhou, J.-Y., Wang, H., He, D., Li, X., Yang, Y., & Huang, H. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b15026 · Cited by 45
Ou, C., Sangle, A. L., Chalklen, T., Jing, Q., Narayan, V., & Kar‐Narayan, S. (2018) · APL Materials · doi:10.1063/1.5043547 · Cited by 45
Solar Harvesting: a Unique Opportunity for Organic Thermoelectrics?
Jurado, J. P., Dörling, B., Zapata‐Arteaga, O., Roig, A., Mihi, A., & Campoy‐Quiles, M. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201902385 · Cited by 45
Giant power factors in p- and n-type large-area graphene films on a flexible plastic substrate
Kanahashi, K., Ishihara, M., Hasegawa, M., Ohta, H., & Takenobu, T. (2019) · npj 2D Materials and Applications · doi:10.1038/s41699-019-0128-0 · Cited by 45
Fully direct written organic micro-thermoelectric generators embedded in a plastic foil
Massetti, M., Bonfadini, S., Nava, D., Butti, M., Criante, L., Lanzani, G., Qiu, L., Hummelen, J. C., Liu, J., Koster, L. J. A., et al. (2020) · Nano Energy · doi:10.1016/j.nanoen.2020.104983 · Cited by 45
“If we consider the possibility of employing, as p-type semiconductor, a DMSO treated PEDOT:PSS [52] (S 1⁄4 80 μV/K, σ 1⁄4 900 S/cm and k┴ 1⁄4 0.”
MethodInfluentialYe, G., Liu, J., Qiu, X., Stäter, S., Qiu, L., Liu, Y., Yang, X., Hildner, R., Koster, L. J. A., & Chiechi, R. C. (2021) · Macromolecules · doi:10.1021/acs.macromol.1c00317 · Cited by 45
“8,9 Molecular doping can be accomplished by simply mixing the polymer and (pre)dopant, casting the mixture into a fi lm, and annealing.”
Two-dimensional flexible thermoelectric devices: Using modeling to deliver optimal capability
Xu, S., Hong, M., Li, M., Sun, Q., Yin, Y. J., Liu, W., Shi, X., Dargusch, M. S., Zou, J., & Chen, Z. (2021) · Applied Physics Reviews · doi:10.1063/5.0067930 · Cited by 46
Operation of Wearable Thermoelectric Generators Using Dual Sources of Heat and Light
Jeong, M. H., Kim, K., Kim, J.-S., & Choi, K. J. (2022) · Advanced Science · doi:10.1002/advs.202104915 · Cited by 45
Advances in conducting polymer nanocomposite based chemical sensors: An overview
Kushwaha, C. S., Singh, P., Shukla, S. K., & Chehimi, M. M. (2022) · Materials Science and Engineering B · doi:10.1016/j.mseb.2022.115856 · Cited by 48
Effect of film thickness and crystallinity on the thermoelectric properties of doped P3HT films
Hong, C. T., Yoo, Y., Kang, Y. H., Ryu, J., Cho, S. Y., & Jang, K. (2015) · RSC Advances · doi:10.1039/c4ra15681a · Cited by 45
Wang, S., Zhu, W., Jacobs, I. E., Wood, W. A., Wang, Z., Manikandan, S., Andreasen, J. W., Un, H., Ursel, S., Peralta, S., et al. (2024) · Advanced Materials · doi:10.1002/adma.202314062 · Cited by 44
n‐Dopants Based on Dimers of Benzimidazoline Radicals: Structures and Mechanism of Redox Reactions
Zhang, S., Naab, B. D., Jucov, E. V., Parkin, S., Evans, E. G. B., Millhauser, G. L., Timofeeva, T. V., Risko, C. M., Brédas, J., Bao, Z., et al. (2015) · Chemistry - A European Journal · doi:10.1002/chem.201500611 · Cited by 44
Wang, W., Sun, S., Gu, S., Shen, H., Zhang, Q., Zhu, J., Wang, L., & Jiang, W. (2014) · RSC Advances · doi:10.1039/c4ra02136c · Cited by 44
Metal-organic complexes-towards promising organic thermoelectric materials
Sun, Y., Xu, W., Di, C., & Zhu, D. (2016) · Synthetic Metals · doi:10.1016/j.synthmet.2016.12.001 · Cited by 44
Zhou, X., Pan, C., Liang, A., Wang, L., & Wong, W. (2017) · Composites Science and Technology · doi:10.1016/j.compscitech.2017.03.040 · Cited by 44
Wang, X., Liu, Z., Yang, Z., He, J., Yang, X., Yu, T., Gao, P., & Ye, J. (2018) · Small · doi:10.1002/smll.201704493 · Cited by 44
Blackburn, J. L., Kang, S. D., Roos, M. J., Norton‐Baker, B., Miller, E. M., & Ferguson, A. J. (2019) · Advanced Electronic Materials · doi:10.1002/aelm.201800910 · Cited by 44
Ruan, L., Zhao, Y., Chen, Z., Zeng, W. D., Wang, S., Liang, D., & Zhao, J. (2020) · Polymers · doi:10.3390/polym12030553 · Cited by 44
Conducting Polymers and Their Hybrids as Organic Thermoelectric Materials
Toshima, N., & Ichikawa, S. (2014) · Journal of Electronic Materials · doi:10.1007/s11664-014-3312-1 · Cited by 44
Metadata
- Authors
- Kim, G.-H., Shao, L., Zhang, K., & Pipe, K. P.
- Affiliations
- University of Michigan (US)
- Corresponding author
- Pipe, K. P.
- ORCID
- Venue
- Nature Materials
- Published
- 2013-05-05
- Volume
- 12
- Issue
- 8
- Pages
- 719-723
- ISSN
- 1476-1122 (ISSN-L)
- 1476-4660
- OpenAlex
- W2001566902
- Cited by
- 1,688
- References
- 16
- Citations by year
- 2026: 65 · 2025: 90 · 2024: 106 · 2023: 115 · 2022: 120 · 2021: 187 · 2020: 172 · 2019: 178 · 2018: 160 · 2017: 147 · 2016: 155 · 2015: 113 · 2014: 69 · 2013: 11
- FWCI
- 52.38
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.springer.com/tdm (tdm)
- www.springer.com/tdm (vor)
- Locations
- Nature Materials (publishedVersion)
- PubMed (publishedVersion)
- Scholarworks@UNIST (Ulsan National Institute of Science and Technology) (submittedVersion)
- Funders
- U.S. Department of Energy (DESC0000957)
- Basic Energy Sciences
- Energy Frontier Research Centers
- Topics
- Physical Sciences › Materials Science › Materials Chemistry › Advanced Thermoelectric Materials and Devices
- Physical Sciences › Materials Science › Materials Chemistry › Thermal properties of materials
- Physical Sciences › Materials Science › Polymers and Plastics › Conducting polymers and applications
- Keywords
- organic thermoelectrics, organic semiconductors, dopant engineering, figure of merit ZT, PEDOT:PSS, PEDOT, Seebeck coefficient, electrical conductivity, carrier concentration, conducting polymers, nanostructured materials
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.