Engineered doping of organic semiconductors for enhanced thermoelectric efficiency
The DOI matches its Crossref record; 16 of the 16 references it cites were found in a registry or an index.
Abstract
Significant improvements to the thermoelectric figure of merit ZT have emerged in recent years, primarily due to the engineering of material composition and nanostructure in inorganic semiconductors (ISCs). However, many present high-ZT materials are based on low-abundance elements that pose challenges for scale-up, as they entail high material costs in addition to brittleness and difficulty in large-area deposition. Here we demonstrate a strategy to improve ZT in conductive polymers and other organic semiconductors (OSCs) for which the base elements are earth-abundant. By minimizing total dopant volume, we show that all three parameters constituting ZT vary in a manner so that ZT increases; this stands in sharp contrast to ISCs, for which these parameters have trade-offs. Reducing dopant volume is found to be as important as optimizing carrier concentration when maximizing ZT in OSCs. Implementing this strategy with the dopant poly(styrenesulphonate) in poly(3,4-ethylenedioxythiophene), we achieve ZT = 0.42 at room temperature.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Various soft conductive materials such as thin metal,[106] conductive polymers,[508] nanomaterials,[509] etc. can be thermally actuated in the form of resistors.”
From Flexible Electronics and Devices as Human–Machine Interfaces for Medical Robotics (2022) · cites this paper as [508]
Citations
Cites
Cooling, Heating, Generating Power, and Recovering Waste Heat with Thermoelectric Systems
Bell, L. E. (2008) · Science · doi:10.1126/science.1158899 · Cited by 6,082
Bubnova, O., Khan, Z. U., Malti, A., Braun, S., Fahlman, M., Berggren, M., & Crispin, X. (2011) · Nature Materials · doi:10.1038/nmat3012 · Cited by 1,769
Kim, Y. H., Sachse, C., Machala, M. L., May, C., Müller‐Meskamp, L., & Leo, K. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201002290 · Cited by 1,458
Xia, Y., Sun, K., & Ouyang, J. (2012) · Advanced Materials · doi:10.1002/adma.201104795 · Cited by 1,124
PEDOT: Principles and Applications of an Intrinsically Conductive Polymer
Elschner, A., Kirchmeyer, S., Lovenich, W., Merker, U., & Reuter, K. (2010) · CRC Press eBooks · doi:10.1201/b10318 · Cited by 758
Microscopic Understanding of the Anisotropic Conductivity of PEDOT:PSS Thin Films
Nardes, A. M., Kemerink, M., Janssen, R. A. J., Bastiaansen, J. A. M., Kiggen, N. M. M., Langeveld, B. M. W., van Breemen, A. J. J. M., & de Kok, M. M. (2007) · Advanced Materials · doi:10.1002/adma.200602575 · Cited by 539
Zhang, B., Sun, J., Katz, H. E., Fang, F., & Opila, R. L. (2010) · ACS Applied Materials & Interfaces · doi:10.1021/am100654p · Cited by 480
Microscopical Investigations of PEDOT:PSS Thin Films
Lang, U., Müller, E., Naujoks, N., & Dual, J. (2009) · Advanced Functional Materials · doi:10.1002/adfm.200801258 · Cited by 457
Poly(3,4-ethylenedioxythiophene) as promising organic thermoelectric materials: A mini-review
Yue, R., & Xu, J. (2012) · Synthetic Metals · doi:10.1016/j.synthmet.2012.04.005 · Cited by 275
Koh, Y. K., Singer, S. L., Kim, W., Zide, J. M. O., Lu, H., Cahill, D. G., Majumdar, A., & Gossard, A. C. (2009) · Journal of Applied Physics · doi:10.1063/1.3078808 · Cited by 205
Cited by
Items 401–500 of 1,000
Untilova, V., Hynynen, J., Hofmann, A., Scheunemann, D., Zhang, Y., Barlow, S. H., Kemerink, M., Marder, S. R., Biniek, L., Müller, C., et al. (2020) · Macromolecules · doi:10.1021/acs.macromol.0c01223 · Cited by 70
Wang, S., Zhou, Y., Liu, Y., Wang, L., & Gao, C. (2019) · Journal of Materials Chemistry C · doi:10.1039/c9tc06300e · Cited by 69
Power Factor of One Molecule Thick Films and Length Dependence
Park, S., Kang, S., & Yoon, H. (2019) · ACS Central Science · doi:10.1021/acscentsci.9b01042 · Cited by 56
“As examples, the PF of DMSO-mixed poly(3,4-ethylenedioxythiophene)/polystyrenesulfonate (PEDOT/PSS)hasbeenreportedas469 μ W m − 1 K − 2 , 15 and an organic thin fi lm composed of polyaniline (PANI), graphene, and double-walled carbon nanotube (DWCN) has been shown to have a PF of 1825 μ W m − 1 K −…”
Huang, X., Deng, L. P., Liu, F., Liu, Z., & Chen, G. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.129230 · Cited by 69
Recent advances in ionic thermoelectric systems and theoretical modelling
Jabeen, N., Muddasar, M., Menéndez, N., Nasiri, M. A., Gómez, C. M., Collins, M. N., Muñoz‐Espí, R., Cantarero, A., & Culebras, M. (2024) · Chemical Science · doi:10.1039/d4sc04158e · Cited by 69
Uddin, A. S. M. I., Yaqoob, U., & Chung, G. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b08002 · Cited by 69
Joo, Y., Huang, L., Eedugurala, N., London, A. E., Kumar, A., Wong, B. M., Boudouris, B. W., & Azoulay, J. D. (2018) · Macromolecules · doi:10.1021/acs.macromol.8b00582 · Cited by 69
Measurement of in-plane thermal conductivity in polymer films
Wei, Q., Uehara, C., Mukaida, M., Kirihara, K., & Ishida, T. (2016) · AIP Advances · doi:10.1063/1.4948447 · Cited by 68
2D layered organic–inorganic heterostructures for clean energy applications
Azadmanjiri, J., Wang, J., Berndt, C. C., & Yu, A. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta00132d · Cited by 68
Mi, X.-Y., Yu, X., Yao, K. L., Huang, X., Yang, N., & Lü, J. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b01491 · Cited by 66
Xu, K., Chen, G., & Qiu, D. (2015) · Chemistry - An Asian Journal · doi:10.1002/asia.201500066 · Cited by 66
El-Shamy, A. G. (2019) · Composites Part B Engineering · doi:10.1016/j.compositesb.2019.106993 · Cited by 66
Carbon-Based Materials for Thermoelectrics
Chakraborty, P., Ma, T., Zahiri, A. H., Cao, L., & Wang, Y. (2018) · Advances in Condensed Matter Physics · doi:10.1155/2018/3898479 · Cited by 70
Kirihara, K., Wei, Q., Mukaida, M., & Ishida, T. (2017) · Synthetic Metals · doi:10.1016/j.synthmet.2017.01.001 · Cited by 65
Progress of hybrid nanocomposite materials for thermoelectric applications
Bisht, N., More, P. V., Khanna, P. K., Abolhassani, R., Mishra, Y. K., & Madsen, M. (2021) · Materials Advances · doi:10.1039/d0ma01030h · Cited by 65
“52Te3 (p) - - 667 S/cm 226 1.50 at 117° C - Kim et al., 2013 70 Mechanochemical, SPS (0.3 vol.% Al2O3)/ Bi0.”
InfluentialElectronic structure engineering in organic thermoelectric materials
Dai, X., Meng, Q. B., Zhang, F., Zou, Y., Di, C., & Zhu, D. (2021) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2021.03.020 · Cited by 65
PEDOT:PSS/PVA/Te ternary composite fibers toward flexible thermoelectric generator
Yang, J., Jia, Y., Liu, Y., Liu, P., Wang, Y., Li, M., Jiang, F., Lan, X., & Xu, J. (2021) · Composites Communications · doi:10.1016/j.coco.2021.100855 · Cited by 65
Design and Construction of Deformable Heaters: Materials, Structure, and Applications
Hu, Z., Zhou, J., & Fu, Q. (2021) · Advanced Electronic Materials · doi:10.1002/aelm.202100459 · Cited by 67
Zhu, Z., Liu, C., Shi, H., Jiang, Q., Xu, J., Jiang, F., Xiong, J., & Liu, E. (2015) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.23718 · Cited by 65
Radial thermoelectric generator fabricated from n‐ and p‐type conducting polymers
Menon, A. K., Meek, O., Eng, A. J., & Yee, S. K. (2016) · Journal of Applied Polymer Science · doi:10.1002/app.44060 · Cited by 65
Freestanding electrochromic paper
Malti, A., Brooke, R., Liu, X., Zhao, D., Ersman, P. A., Fahlman, M., Jonsson, M. P., Magnus Berggren, A., & Xavier Crispin, A. (2016) · Journal of Materials Chemistry C · doi:10.1039/c6tc03542f · Cited by 65
Lee, T., Park, K. T., Ku, B., & Kim, H. (2019) · Nanoscale · doi:10.1039/c9nr05757a · Cited by 65
Yemata, T. A., Zheng, Y., Kyaw, A. K. K., Wang, X., Song, J. C., Chin, W. S., & Xu, J. (2020) · Frontiers in Chemistry · doi:10.3389/fchem.2019.00870 · Cited by 65
Wang, Z., Wang, T., Zhuang, M., & Xu, H. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b16353 · Cited by 65
Sharma, A., Masoumi, S., Gedefaw, D., O’Shaughnessy, S. M., Baran, D., & Pakdel, A. (2022) · Applied Materials Today · doi:10.1016/j.apmt.2022.101614 · Cited by 64
Minimization of the electrical contact resistance in thin-film thermoelectric device
Tan, M., Liu, W., Shi, X., Sun, Q., & Chen, Z. (2023) · Applied Physics Reviews · doi:10.1063/5.0141075 · Cited by 64
Progress and challenges of emerging MXene based materials for thermoelectric applications
Zhu, M., Lu, C., & Liu, L. (2023) · iScience · doi:10.1016/j.isci.2023.106718 · Cited by 64
Wang, X., Meng, F., Jiang, Q., Zhou, W., Jiang, F., Wang, T., Li, X., Li, S., Lin, Y., & Xu, J. (2018) · ACS Applied Energy Materials · doi:10.1021/acsaem.8b00315 · Cited by 64
Liu, Z., Hu, Y., Li, P., Wen, J., He, J., & Gao, X. (2020) · Journal of Materials Chemistry C · doi:10.1039/d0tc01047b · Cited by 65
Role of interfaces in organic–inorganic flexible thermoelectrics
Лю, Ч., Shan, D.-L., Shen, Z.-H., Ren, G., Wang, Y., Zhou, Z., Li, J., Yi, D., Lan, J., Chen, L., et al. (2021) · Nano Energy · doi:10.1016/j.nanoen.2021.106380 · Cited by 63
Paper: An effective substrate for the enhancement of thermoelectric properties in PEDOT:PSS
Jiang, Q., Liu, C., Xu, J., Lu, B., Song, H., Shi, H., Yao, Y., & Zhang, L. (2014) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.23482 · Cited by 63
Nanolaminated composite materials: structure, interface role and applications
Azadmanjiri, J., Berndt, C. C., Wang, J., Kapoor, A., & Srivastava, V. K. (2016) · RSC Advances · doi:10.1039/c6ra20050h · Cited by 65
Recent Development and Application of Conductive MOFs
Li, P., & Wang, B. (2018) · Israel Journal of Chemistry · doi:10.1002/ijch.201800078 · Cited by 63
Thermoelectric Properties of Conducting Polymer Nanowire–Tellurium Nanowire Composites
Hu, X., Zhang, K., Zhang, J., Wang, S., & Qiu, Y. (2018) · ACS Applied Energy Materials · doi:10.1021/acsaem.8b00909 · Cited by 63
Self-citationBerri, S., & Bouarissa, N. (2022) · Energy Storage · doi:10.1002/est2.400 · Cited by 62
“The Seebeck coefficient of K2ABF6 is calculated using the relation = V/ΔT.52 The alteration of S with carrier concentration is plotted and profiled in Figure 4.”
BackgroundMethodInfluentialReview on recent development on thermoelectric functions of PEDOT:PSS based systems
Naim, A. F. A., & El-Shamy, A. G. (2022) · Materials Science in Semiconductor Processing · doi:10.1016/j.mssp.2022.107041 · Cited by 63
Thermoelectric energy conversion in buildings
Jabri, M., Masoumi, S., Sajadirad, F., West, R., & Pakdel, A. (2023) · Materials Today Energy · doi:10.1016/j.mtener.2023.101257 · Cited by 62
“02Te-4%SrTe DOT:PSS) and dimethyl sulfoxide (DMSO) mixture [58], (7) Polyaniline/single walled”
BackgroundTam, T. L. D., Ng, C. K., Lim, S. L., Yıldırım, E., Ko, J., Leong, W. L., Yang, S., & Xu, J. (2019) · Chemistry of Materials · doi:10.1021/acs.chemmater.9b03684 · Cited by 62
Tanaka, H., Hirate, M., Watanabe, S., & Kuroda, S. (2013) · Advanced Materials · doi:10.1002/adma.201304691 · Cited by 63
Wearable and flexible thermoelectrics for energy harvesting
Tian, R., Wan, C., Hayashi, N., Aoai, T., & Koumoto, K. (2018) · MRS Bulletin · doi:10.1557/mrs.2018.8 · Cited by 61
Zhou, Q. F., Li, H., Du, C., Ye, Z., Liang, L., & Chen, G. (2023) · Nano Energy · doi:10.1016/j.nanoen.2023.109007 · Cited by 61
Thermoelectric performance of p-type nanohybrids filled polymer composites
Zhang, K., Wang, S., Zhang, X., Zhang, Y., Cui, Y., & Qiu, J. (2015) · Nano Energy · doi:10.1016/j.nanoen.2015.03.004 · Cited by 61
Self-citationTailoring surface phase transition and magnetic behaviors in BiFeO3 via doping engineering
Yan, F., Xing, G., Wang, R., & Li, L. (2015) · Scientific Reports · doi:10.1038/srep09128 · Cited by 61
Flexible Piezoelectric Fibers for Acoustic Sensing and Positioning
Wang, S., Zhang, T., Li, K., Ma, S., Chen, M., Lu, P., & Wei, L. (2017) · Advanced Electronic Materials · doi:10.1002/aelm.201600449 · Cited by 61
Effects of Disorder on Thermoelectric Properties of Semiconducting Polymers
Upadhyaya, M., Boyle, C. J., Venkataraman, D., & Akšamija, Z. (2019) · Scientific Reports · doi:10.1038/s41598-019-42265-z · Cited by 60
“They can be chemically oxidized or reduced (doped) to induce high levels of carrier density and thus improve their electrical conductivity [12, 15].”
BackgroundB ← N Unit Enables n-Doping of Conjugated Polymers for Thermoelectric Application
Dong, C., Meng, B., Liu, J., & Wang, L. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b21527 · Cited by 61
A flexible thermoelectric device based on a Bi2Te3-carbon nanotube hybrid
Li, Y., Qiao, J., Zhao, Y., Lan, Q., Mao, P., Qiu, J., Tai, K., Liu, C., & Cheng, H. (2020) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2020.03.066 · Cited by 61
Jeong, M. H., Sanger, A., Kang, S. B., Jung, Y. S., Oh, I., Yoo, J., Kim, G. H., & Choi, K. J. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta03606c · Cited by 60
Self-citationA Review on the Fabrication of Polymer‐Based Thermoelectric Materials and Fabrication Methods
Kamarudin, M. A., Sahamir, S. R., Datta, R. S., Long, B. D., Sabri, M. F. M., & Said, S. M. (2013) · The Scientific World JOURNAL · doi:10.1155/2013/713640 · Cited by 60
“[64] recently have optimized the ZT of the PEDOT : PSS mixture by removing the portion of unionized PSS dopant using a choice of solvents, thus achieving a record value of ZT = 0.”
MethodStepien, L., Roch, A., Schlaier, S., Dani, I., Kiriy, A., Simon, F., Lukowicz, M. V., & Leyens, C. (2015) · Energy Harvesting and Systems · doi:10.1515/ehs-2014-0060 · Cited by 60
“The control of the doping level in PEDOT was performed by several groups with electrochemical treatment (Ahonen, Lukkari, and Kankare 2000; Lock et al. 2007; Bubnova et al. 2011; Park et al. 2013) or change of solvents (Kim et al. 2002, 2005, 2013; Ouyang et al. 2004; Meen et al. 2013).”
BackgroundMethodInfluentialKim, J., Khim, D., Baeg, K., Park, W., Lee, S., Kang, M., Noh, Y., & Kim, D. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201602610 · Cited by 60
Park, C., Yoo, D., Im, S., Kim, S., Cho, W., Ryu, J., & Kim, J. H. (2017) · RSC Advances · doi:10.1039/c7ra02980b · Cited by 60
High‐Performance Organic Thermoelectric Materials: Theoretical Insights and Computational Design
Shi, W. Y., Wang, D., & Shuai, Z. (2019) · Advanced Electronic Materials · doi:10.1002/aelm.201800882 · Cited by 62
Chen, Z., Lv, H., Zhang, Q., Wang, H., & Chen, G. (2021) · Carbon Energy · doi:10.1002/cey2.161 · Cited by 59
Chemical synthesis and materials discovery
Cheetham, A. K., Seshadri, R., & Wudl, F. (2022) · Nature Synthesis · doi:10.1038/s44160-022-00096-3 · Cited by 59
“4.(10) By far its most important applications, however, are in organic electronics as hole transporting layers and as transparent thin film conductors with conductivities as high as 4600 S/cm,(11) far surpassing those of indium tin oxide (ITO).”
BackgroundDeng, Y.-Y., Shi, X., Wu, T., Yue, Y., Liu, W., Li, M., Yue, F., Pei, H., Liu, Q., & Chen, Z. (2024) · Advanced Fiber Materials · doi:10.1007/s42765-024-00441-5 · Cited by 59
Design of a polymer thermoelectric generator using radial architecture
Menon, A. K., & Yee, S. K. (2016) · Journal of Applied Physics · doi:10.1063/1.4941101 · Cited by 59
Anisotropies and the thermoelectric properties of semiconducting polymers
Patel, S. N., & Chabinyc, M. L. (2016) · Journal of Applied Polymer Science · doi:10.1002/app.44403 · Cited by 60
Preparation and thermoelectric properties of flexible SWCNT/PEDOT:PSS composite film
Du, Y., Shi, Y., Meng, Q., & Shen, S. (2020) · Synthetic Metals · doi:10.1016/j.synthmet.2020.116318 · Cited by 59
Xu, H., Pang, X., He, Y., He, M. S., Jung, J., Xia, H., & Lin, Z. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201500763 · Cited by 58
Role of polythiophenes as electroactive materials
Pathiranage, T. M. S. K., Dissanayake, D. S., Niermann, C. N., Ren, Y., Biewer, M. C., & Stefan, M. C. (2017) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.28726 · Cited by 61
Lee, J., Kim, J., Nguyen, T. L., Kim, M., Park, J., Lee, Y., Hwang, S., Kwon, Y.-W., Kwak, J., & Woo, H. Y. (2018) · Macromolecules · doi:10.1021/acs.macromol.8b00419 · Cited by 58
High Thermoelectric and Flexible PEDOT/SWCNT/BC Nanoporous Films Derived from Aerogels
Jia, F., Wu, R., Лю, Ч., Lan, J., Lin, Y., & Yang, X. (2019) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.9b02518 · Cited by 58
Thermoelectric performance of Cu-doped MoS2 layered nanosheets for low grade waste heat recovery
Dona, J., NAVANEETHAN, M., Abinaya, R., Harish, S., Archana, J., Ponnusamy, S., Hara, K., & Hayakawa, Y. (2019) · Applied Surface Science · doi:10.1016/j.apsusc.2019.144066 · Cited by 58
Thermoelectric Properties of Semiconducting Polymers
Peterson, K. A., Thomas, E. M., & Chabinyc, M. L. (2020) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-082219-024716 · Cited by 58
Bottom-up design of de novo thermoelectric hybrid materials using chalcogenide resurfacing
Sahu, A., Russ, B., Su, N. C., Forster, J. D., Zhou, P., Cho, E. S., Ercius, P. A., Coates, N. E., Segalman, R. A., & Urban, J. J. (2017) · Journal of Materials Chemistry A · doi:10.1039/c6ta09781b · Cited by 57
High thermoelectric performance in metallic NiAu alloys via interband scattering
Garmroudi, F., Parzer, M., Riss, A., Bourgès, C., Khmelevskyi, S., Mori, T., Bauer, E., & Pustogow, A. (2023) · Science Advances · doi:10.1126/sciadv.adj1611 · Cited by 57
Silver Copper Chalcogenide Thermoelectrics: Advance, Controversy, and Perspective
Li, N., Zhang, Q., Shi, X., Jiang, J., & Chen, Z. (2024) · Advanced Materials · doi:10.1002/adma.202313146 · Cited by 57
Huang, D., Zou, Y., Jiao, F., Zhang, F., Zang, Y., Di, C., Xu, W., & Zhu, D. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b01460 · Cited by 58
Effect of Crystalline Microstructure Evolution on Thermoelectric Performance of PEDOT : PSS Films
Huang, X., Deng, L. P., Liu, F., Zhang, Q., & Chen, G. (2021) · Energy Material Advances · doi:10.34133/2021/1572537 · Cited by 57
“The reason may be assigned to macromolecular crystallization, and preferred orientation usually tends to take place in the skin layer rather than the core region [47, 48, 50].”
BackgroundHeat shrink formation of a corrugated thin film thermoelectric generator
Sun, T., Peavey, J. L., Shelby, M. D., Ferguson, S., & O’Connor, B. T. (2015) · Energy Conversion and Management · doi:10.1016/j.enconman.2015.07.016 · Cited by 57
“4 [7], and hybrid solution processed materials have been shown to have ZT values as high as 0.”
BackgroundAchieving High Thermoelectric Performance and Metallic Transport in Solvent‐Sheared PEDOT:PSS
Hinckley, A. C., Andrews, S. C., Dunham, M. T., Sood, A., Barako, M. T., Schneider, S. A., Toney, M. F., Goodson, K. E., & Bao, Z. (2021) · Advanced Electronic Materials · doi:10.1002/aelm.202001190 · Cited by 56
Thermocells-enabled low-grade heat harvesting: challenge, progress, and prospects
Li, W., Ma, J., Qiu, J., & Wang, S. (2022) · Materials Today Energy · doi:10.1016/j.mtener.2022.101032 · Cited by 56
Superflexible Inorganic Ag2Te0.6S0.4 Fiber with High Thermoelectric Performance
Fu, Y., Kang, S., Gu, H., Tan, L., Gao, C., Fang, Z., Dai, S., & Lin, C. (2023) · Advanced Science · doi:10.1002/advs.202207642 · Cited by 56
An n‐Type Conjugated Polymer with Low Crystallinity for High‐Performance Organic Thermoelectrics
Gao, Y., Ke, Y., Wang, T., Shi, Y., Wang, C., Ding, S., Wang, Y., Deng, Y., Hu, W., & Geng, Y. (2024) · Angewandte Chemie International Edition · doi:10.1002/anie.202402642 · Cited by 56
Hao, X., Wang, J., & Wang, H. (2025) · Chemical Society Reviews · doi:10.1039/d4cs01045k · Cited by 56
Mazaheripour, A., Majumdar, S., Rawlings, D., Thomas, E. M., McGuiness, C. L., Pautrot‐d'Alençon, L., Chabinyc, M. L., & Segalman, R. A. (2018) · Chemistry of Materials · doi:10.1021/acs.chemmater.8b02114 · Cited by 56
Ponder, J. F., Menon, A. K., Dasari, R. R., Pittelli, S. L., Thorley, K. J., Yee, S. K., Marder, S. R., & Reynolds, J. R. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201900395 · Cited by 56
Liu, J., Garman, M. P., Dong, J., van der Zee, B., Qiu, L., Portale, G., Hummelen, J. C., & Koster, L. J. A. (2019) · ACS Applied Energy Materials · doi:10.1021/acsaem.9b01179 · Cited by 56
Validity of the Mott formula and the origin of thermopower in π -conjugated semicrystalline polymers
Watanabe, S., Ohno, M., Yamashita, Y., Terashige, T., Okamoto, H., & Takeya, J. (2019) · Physical review. B./Physical review. B · doi:10.1103/physrevb.100.241201 · Cited by 55
Flexible metal-free hybrid hydrogel thermoelectric fibers
Liu, J., Zhu, Z., Zhou, W., Liu, P., Liu, G., Liu, G., Xu, J., Jiang, Q., & Jiang, F. (2020) · Journal of Materials Science · doi:10.1007/s10853-020-04382-3 · Cited by 55
A Review on Flexible Thermoelectric Technology: Material, Device, and Applications
Wu, P., He, Z., Yang, M., Xu, J., Li, N., Wang, Z., Li, J., Ma, T., Lu, X., Zhang, H., et al. (2021) · International Journal of Thermophysics · doi:10.1007/s10765-021-02860-7 · Cited by 57
Energy-Filtered Acceleration of Charge-Carrier Transport in Organic Thermoelectric Nanocomposites
Kim, D., Park, Y., Ju, D., Lee, G., Kwon, W., & Cho, K. (2021) · Chemistry of Materials · doi:10.1021/acs.chemmater.0c04677 · Cited by 55
Li, M., Zeng, F., Luo, M., Qing, X., Wang, W., Lü, Y., Zhong, W., Yang, L., Liu, Q., Wang, Y., et al. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c15946 · Cited by 55
Lee, S. H., Sohn, J. S., KULKARNI, D. S. B., Patil, U. M., Jun, S. C., & Kim, J. H. (2014) · Organic Electronics · doi:10.1016/j.orgel.2014.09.020 · Cited by 55
Zhou, J. P., Anjum, D. H., Gilles Lubineau, A., Li, E. Q., & Thoroddsen, S. T. (2015) · Macromolecules · doi:10.1021/acs.macromol.5b00851 · Cited by 55
Heat‐Sink‐Free Flexible Organic Thermoelectric Generator Vertically Operating with Chevron Structure
Kim, D., Ju, D., & Cho, K. (2018) · Advanced Materials Technologies · doi:10.1002/admt.201700335 · Cited by 55
Novak, T. G., Shin, H., Kim, J., Kim, K.-S., Azam, A., Nguyen, C. V., Park, S. H., Song, J. Y., & Jeon, S. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b03982 · Cited by 55
Drastic Improvement of Air Stability in an n-Type Doped Naphthalene-Diimide Polymer by Thionation
Nava, D., Shin, Y., Massetti, M., Jiao, X., Biskup, T., Jagadeesh, M. S., Calloni, A., Duò, L., Lanzani, G., McNeill, C. R., et al. (2018) · ACS Applied Energy Materials · doi:10.1021/acsaem.8b00777 · Cited by 55
“30 While solution-processable organic p-type materials having a PF in excess of 100 μ W m − 1 K − 2 have been demonstrated, 31 − 34 the major limitations are ascribable to n-type materials, for which examples combining high electrical conductivity and solution processability are very scarce.”
Du, Y., Niu, H., Li, J., Dou, Y., Shen, S., Jia, R., & Xu, J. (2018) · Polymers · doi:10.3390/polym10101143 · Cited by 55
“Poly(3,4-ethylenedioxythiophene) (PEDOT), one of the most studied conducing polymers, shows a potential application prospect in TE [11].”
BackgroundGoel, M., Heinrich, C. D., Krauss, G., & Thelakkat, M. (2019) · Macromolecular Rapid Communications · doi:10.1002/marc.201800915 · Cited by 55
High Performance Polymer Thermoelectric Composite Achieved by Carbon-Coated Carbon Nanotubes Network
Li, D., Luo, C., Chen, Y., Feng, D., Gong, Y., Pan, C., & He, J. (2019) · ACS Applied Energy Materials · doi:10.1021/acsaem.9b00334 · Cited by 55
Yemata, T. A., Kyaw, A. K. K., Zheng, Y., Wang, X., Zhu, Q., Chin, W. S., & Xu, J. (2019) · Polymer International · doi:10.1002/pi.5921 · Cited by 55
Graphene/Polymer Hybrid Fiber with Enhanced Fracture Elongation for Thermoelectric Energy Harvesting
Liu, J., Liu, G., Xu, J., Liu, C., Zhou, W., Liu, P., Nie, G., Duan, X., & Jiang, F. (2020) · ACS Applied Energy Materials · doi:10.1021/acsaem.0c00001 · Cited by 55
Recent Advances in Multicomponent Organic Composite Thermoelectric Materials
Bao, Y., Sun, Y., Jiao, F., & Hu, W. (2023) · Advanced Electronic Materials · doi:10.1002/aelm.202201310 · Cited by 54
Thermoelectric Materials and Devices for Advanced Biomedical Applications
Jia, S., Ma, H., Gao, S., Yang, L., & Sun, Q. (2024) · Small · doi:10.1002/smll.202405019 · Cited by 56
Li, X., Liang, L., Yang, M., Chen, G., & Guo, C. (2016) · Organic Electronics · doi:10.1016/j.orgel.2016.08.022 · Cited by 54
Li, X., Liu, C., Zhou, W., Duan, X., Du, Y., Xu, J., Li, C., Liu, J., Jia, Y., Liu, P., et al. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b00298 · Cited by 54
Regulation of High Miscibility for Efficient Charge‐Transport in n‐Doped Conjugated Polymers
Li, Q., Yao, Z., Wu, H., Luo, L., Ding, Y., Yang, C., Wang, X., Shen, Z., Wang, J., & Pei, J. (2022) · Angewandte Chemie International Edition · doi:10.1002/anie.202200221 · Cited by 53
Ductile P‐Type AgCu(Se,S,Te) Thermoelectric Materials
Shen, K., Yang, Q., Qiu, P., Zhou, Z., Yang, S., Wei, T., & Shi, X. (2024) · Advanced Materials · doi:10.1002/adma.202407424 · Cited by 53
Metadata
- Authors
- Kim, G.-H., Shao, L., Zhang, K., & Pipe, K. P.
- Affiliations
- University of Michigan (US)
- Corresponding author
- Pipe, K. P.
- ORCID
- Venue
- Nature Materials
- Published
- 2013-05-05
- Volume
- 12
- Issue
- 8
- Pages
- 719-723
- ISSN
- 1476-1122 (ISSN-L)
- 1476-4660
- OpenAlex
- W2001566902
- Cited by
- 1,688
- References
- 16
- Citations by year
- 2026: 65 · 2025: 90 · 2024: 106 · 2023: 115 · 2022: 120 · 2021: 187 · 2020: 172 · 2019: 178 · 2018: 160 · 2017: 147 · 2016: 155 · 2015: 113 · 2014: 69 · 2013: 11
- FWCI
- 52.38
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.springer.com/tdm (tdm)
- www.springer.com/tdm (vor)
- Locations
- Nature Materials (publishedVersion)
- PubMed (publishedVersion)
- Scholarworks@UNIST (Ulsan National Institute of Science and Technology) (submittedVersion)
- Funders
- U.S. Department of Energy (DESC0000957)
- Basic Energy Sciences
- Energy Frontier Research Centers
- Topics
- Physical Sciences › Materials Science › Materials Chemistry › Advanced Thermoelectric Materials and Devices
- Physical Sciences › Materials Science › Materials Chemistry › Thermal properties of materials
- Physical Sciences › Materials Science › Polymers and Plastics › Conducting polymers and applications
- Keywords
- organic thermoelectrics, organic semiconductors, dopant engineering, figure of merit ZT, PEDOT:PSS, PEDOT, Seebeck coefficient, electrical conductivity, carrier concentration, conducting polymers, nanostructured materials
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.