Engineered doping of organic semiconductors for enhanced thermoelectric efficiency
The DOI matches its Crossref record; 16 of the 16 references it cites were found in a registry or an index.
Abstract
Significant improvements to the thermoelectric figure of merit ZT have emerged in recent years, primarily due to the engineering of material composition and nanostructure in inorganic semiconductors (ISCs). However, many present high-ZT materials are based on low-abundance elements that pose challenges for scale-up, as they entail high material costs in addition to brittleness and difficulty in large-area deposition. Here we demonstrate a strategy to improve ZT in conductive polymers and other organic semiconductors (OSCs) for which the base elements are earth-abundant. By minimizing total dopant volume, we show that all three parameters constituting ZT vary in a manner so that ZT increases; this stands in sharp contrast to ISCs, for which these parameters have trade-offs. Reducing dopant volume is found to be as important as optimizing carrier concentration when maximizing ZT in OSCs. Implementing this strategy with the dopant poly(styrenesulphonate) in poly(3,4-ethylenedioxythiophene), we achieve ZT = 0.42 at room temperature.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Various soft conductive materials such as thin metal,[106] conductive polymers,[508] nanomaterials,[509] etc. can be thermally actuated in the form of resistors.”
From Flexible Electronics and Devices as Human–Machine Interfaces for Medical Robotics (2022) · cites this paper as [508]
Citations
Cites
Cooling, Heating, Generating Power, and Recovering Waste Heat with Thermoelectric Systems
Bell, L. E. (2008) · Science · doi:10.1126/science.1158899 · Cited by 6,082
Bubnova, O., Khan, Z. U., Malti, A., Braun, S., Fahlman, M., Berggren, M., & Crispin, X. (2011) · Nature Materials · doi:10.1038/nmat3012 · Cited by 1,769
Kim, Y. H., Sachse, C., Machala, M. L., May, C., Müller‐Meskamp, L., & Leo, K. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201002290 · Cited by 1,458
Xia, Y., Sun, K., & Ouyang, J. (2012) · Advanced Materials · doi:10.1002/adma.201104795 · Cited by 1,124
PEDOT: Principles and Applications of an Intrinsically Conductive Polymer
Elschner, A., Kirchmeyer, S., Lovenich, W., Merker, U., & Reuter, K. (2010) · CRC Press eBooks · doi:10.1201/b10318 · Cited by 758
Microscopic Understanding of the Anisotropic Conductivity of PEDOT:PSS Thin Films
Nardes, A. M., Kemerink, M., Janssen, R. A. J., Bastiaansen, J. A. M., Kiggen, N. M. M., Langeveld, B. M. W., van Breemen, A. J. J. M., & de Kok, M. M. (2007) · Advanced Materials · doi:10.1002/adma.200602575 · Cited by 539
Zhang, B., Sun, J., Katz, H. E., Fang, F., & Opila, R. L. (2010) · ACS Applied Materials & Interfaces · doi:10.1021/am100654p · Cited by 480
Microscopical Investigations of PEDOT:PSS Thin Films
Lang, U., Müller, E., Naujoks, N., & Dual, J. (2009) · Advanced Functional Materials · doi:10.1002/adfm.200801258 · Cited by 457
Poly(3,4-ethylenedioxythiophene) as promising organic thermoelectric materials: A mini-review
Yue, R., & Xu, J. (2012) · Synthetic Metals · doi:10.1016/j.synthmet.2012.04.005 · Cited by 275
Koh, Y. K., Singer, S. L., Kim, W., Zide, J. M. O., Lu, H., Cahill, D. G., Majumdar, A., & Gossard, A. C. (2009) · Journal of Applied Physics · doi:10.1063/1.3078808 · Cited by 205
Cited by
Items 101–200 of 1,000
Conducting polymer/carbon particle thermoelectric composites: Emerging green energy materials
Gao, C., & Chen, G. (2016) · Composites Science and Technology · doi:10.1016/j.compscitech.2016.01.014 · Cited by 247
Giant negative thermopower of ionic hydrogel by synergistic coordination and hydration interactions
Chen, B., Chen, Q., Xiao, S., Feng, J., Zhang, X., & Wang, T. (2021) · Science Advances · doi:10.1126/sciadv.abi7233 · Cited by 254
Transparent and flexible organic semiconductor nanofilms with enhanced thermoelectric efficiency
Lee, S. H., Park, H., Kim, S., Son, W., Cheong, I. W., & Kim, J. H. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta00700j · Cited by 247
High‐Performance Thermoelectric SnSe: Aqueous Synthesis, Innovations, and Challenges
Shi, X., Tao, X., Zou, J., & Chen, Z. (2020) · Advanced Science · doi:10.1002/advs.201902923 · Cited by 252
Physical sensors for skin‐inspired electronics
Li, S., Zhang, Y., Wang, Y., Xia, K., Yin, Z., Wang, H., Zhang, M., Liang, X., Lu, H., Zhu, M., et al. (2020) · InfoMat · doi:10.1002/inf2.12060 · Cited by 245
Mengistie, D. A., Chen, C.-H., Boopathi, K. M., Pranoto, F. W., Li, L.-J., & Chu, C.-W. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/am507032e · Cited by 240
Choi, J., Jung, Y., Yang, S. J., Oh, J. Y., Oh, J., Jo, K., Son, J. G., Moon, S. E., Park, C. R., & Kim, H. (2017) · ACS Nano · doi:10.1021/acsnano.7b01771 · Cited by 242
2D Materials for Large‐Area Flexible Thermoelectric Devices
Kanahashi, K., Pu, J., & Takenobu, T. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201902842 · Cited by 236
Review on Polymers for Thermoelectric Applications
Culebras, M., Gómez, C., & Cantarero, A. (2014) · Materials · doi:10.3390/ma7096701 · Cited by 235
“[48] reported the thermoelectric measurements of PEDOT:PSS with 5% of DMSO and EG after submerging the films in EG several times (from 0 to 450 min) in order to remove the PSS in excess.”
BackgroundMethodHybrid Organic–Inorganic Thermoelectric Materials and Devices
Jin, H., Li, J., Iocozzia, J., Zeng, X., Wei, P., Yang, C., Li, N., Liu, Z., He, J. H., Zhu, T., et al. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201901106 · Cited by 238
Ionic Seebeck Effect in Conducting Polymers
Wang, H., Ail, U., Gabrielsson, R., Berggren, M., & Crispin, X. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500044 · Cited by 230
Recent Progress on PEDOT-Based Thermoelectric Materials
Wei, Q., Mukaida, M., Kirihara, K., Naitoh, Y., & Ishida, T. (2015) · Materials · doi:10.3390/ma8020732 · Cited by 226
“42 [49] PEDOT:tos ~85 1290 - [47] PEDOT:tos 55 453 - [48] PEDOT:BTFMSI ~40 147 0.”
MethodTextile sensors for wearable applications: a comprehensive review
Islam, G. M. N., Ali, A., & Collie, S. (2020) · Cellulose · doi:10.1007/s10570-020-03215-5 · Cited by 226
Advances in Ag2Se-based thermoelectrics from materials to applications
Wu, H., Shi, X.-L., Duan, J., Liu, Q., & Chen, Z.-G. (2023) · Energy & Environmental Science · doi:10.1039/d3ee00378g · Cited by 226
Wang, L., Zhang, Z., Geng, L., Yuan, T., Liu, Y., Guo, J., Fang, L., Qiu, J., & Wang, S. (2018) · Energy & Environmental Science · doi:10.1039/c7ee03617e · Cited by 225
“25.(6,7) Unfortunately, the developments of n-type organic thermoelectric materials significantly lags behind their p-type counterparts in terms of low electron transport properties and poor stability.”
BackgroundStrategies To Enhance the Conductivity of n-Type Polymer Thermoelectric Materials
Lu, Y., Wang, J.-Y., & Pei, J. (2019) · Chemistry of Materials · doi:10.1021/acs.chemmater.9b01422 · Cited by 226
Inorganic and Organic Solution-Processed Thin Film Devices
Eslamian, M. (2017) · Nano-Micro Letters · doi:10.1007/s40820-016-0106-4 · Cited by 226
“42 for spun-on doped PEDOT:PSS co-polymer thin films [84].”
BackgroundTaroni, P. J., Santagiuliana, G., Wan, K., Calado, P., Qiu, M., Zhang, H., Pugno, N. M., Palma, M., Stingelin‐Stutzman, N., Heeney, M., et al. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201704285 · Cited by 225
Liu, J., Ye, G., Zee, B. V. D., Dong, J., Qiu, X., Liu, Y., Portale, G., Chiechi, R. C., & Koster, L. J. A. (2018) · Advanced Materials · doi:10.1002/adma.201804290 · Cited by 225
Smart window technology and its potential for net-zero buildings: A review
Mustafa, M. N., Mohd Abdah, M. A. A., Numan, A., Moreno-Rangel, A., Radwan, A., & Khalid, M. (2023) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2023.113355 · Cited by 214
Significant Electronic Thermal Transport in the Conducting Polymer Poly(3,4‐ethylenedioxythiophene)
Weathers, A., Khan, Z. U., Brooke, R., Evans, D., Pettes, M. T., Andreasen, J. W., Crispin, X., & Shi, L. (2015) · Advanced Materials · doi:10.1002/adma.201404738 · Cited by 221
Ionic Thermoelectric Figure of Merit for Charging of Supercapacitors
Wang, H., Zhao, D., Khan, Z. U., Puzinas, S., Jonsson, M. P., Berggren, M., & Crispin, X. (2017) · Advanced Electronic Materials · doi:10.1002/aelm.201700013 · Cited by 226
MacLeod, B. A., Stanton, N. J., Gould, I. E., Wesenberg, D., Ihly, R., Owczarczyk, Z. R., Hurst, K. E., Fewox, C. S., Folmar, C. N., Holman Hughes, K., et al. (2017) · Energy & Environmental Science · doi:10.1039/c7ee01130j · Cited by 224
Woven‐Yarn Thermoelectric Textiles
Lee, J. A., Aliev, A. E., Bykova, J. S., de Andrade, M. J., Kim, D., Sim, H. J., Lepró, X., Zakhidov, A. A., Lee, J., Spinks, G. M., et al. (2016) · Advanced Materials · doi:10.1002/adma.201600709 · Cited by 223
Thermal Transport in Conductive Polymer–Based Materials
Xu, X., Zhou, J., & Chen, J. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201904704 · Cited by 224
Recent Progress in Thermoelectric Materials Based on Conjugated Polymers
Yao, C.-J., Zhang, H.-L., & Zhang, Q. (2019) · Polymers · doi:10.3390/polym11010107 · Cited by 216
“The TE performance of PEDOT/PSS(poly(4-styrenesulfonate)) has been extensively studied by many groups [71].”
BackgroundXu, S., Hong, M., Shi, X.-L., Wang, Y., Ge, L., Bai, Y., Wang, L., Dargusch, M., Zou, J., & Chen, Z.-G. (2019) · Chemistry of Materials · doi:10.1021/acs.chemmater.9b01500 · Cited by 222
Ding, J., Liu, Z., Zhao, W., Jin, W., Xiang, L., Wang, Z., Zeng, Y., Zou, Y., Zhang, F., Yi, Y., et al. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201911058 · Cited by 221
Thermoelectrics for medical applications: Progress, challenges, and perspectives
Hu, B., Shi, X.-L., Zou, J., & Chen, Z.-G. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2022.135268 · Cited by 220
Feng, K., Guo, H., Wang, J., Shi, Y., Wu, Z., Su, M., Zhang, X., Son, J. H., Woo, H. Y., & Guo, X. (2021) · Journal of the American Chemical Society · doi:10.1021/jacs.0c11608 · Cited by 219
Russ, B., Robb, M. J., Brunetti, F. G., Miller, P. L., Perry, E. E., Patel, S. N., Ho, V., Chang, W. B., Urban, J. J., Chabinyc, M. L., et al. (2014) · Advanced Materials · doi:10.1002/adma.201306116 · Cited by 218
Thermoelectric Generators: Alternative Power Supply for Wearable Electrocardiographic Systems
Dargusch, M., Liu, W., & Chen, Z. (2020) · Advanced Science · doi:10.1002/advs.202001362 · Cited by 212
Multi-heterojunctioned plastics with high thermoelectric figure of merit
Wang, D., Ding, J., Ma, Y., Xu, C., Li, Z., Zhang, X., Zhao, Y., Zhao, Y., Di, Y., Liu, L., et al. (2024) · Nature · doi:10.1038/s41586-024-07724-2 · Cited by 200
Jiang, Y., Liu, T., & Zhou, Y. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202006213 · Cited by 206
Li, M., Chen, J., Zhong, W., Luo, M., Wang, W., Qing, X., Lu, Y., Liu, Q., Liu, K., Wang, Y., et al. (2020) · ACS Sensors · doi:10.1021/acssensors.0c00870 · Cited by 208
Metallic behaviour of acid doped highly conductive polymers
Massonnet, N., Carella, A., de Geyer, A., Faure-Vincent, J., & Simonato, J.-P. (2015) · Chemical Science · doi:10.1039/c4sc02463j · Cited by 203
Shi, W., Zhao, T., Xi, J., Wang, D., & Shuai, Z. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b06584 · Cited by 209
A thermally activated and highly miscible dopant for n-type organic thermoelectrics
Yang, C.-Y., Ding, Y.-F., Huang, D., Wang, J., Yao, Z.-F., Huang, C.-X., Lu, Y., Un, H.-I., Zhuang, F.-D., Dou, J.-H., et al. (2020) · Nature Communications · doi:10.1038/s41467-020-17063-1 · Cited by 202
Ionic Liquid Designed for PEDOT:PSS Conductivity Enhancement
de Izarra, A., Park, S., Lee, J., Lansac, Y., & Jang, Y. H. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.7b10306 · Cited by 202
Thermoelectric Polymers and their Elastic Aerogels
Khan, Z. U., Edberg, J., Hamedi, M. M., Gabrielsson, R., Granberg, H., Wågberg, L., Engquist, I., Berggren, M., & Crispin, X. (2016) · Advanced Materials · doi:10.1002/adma.201505364 · Cited by 199
Organic-based flexible thermoelectric generators: From materials to devices
Masoumi, S., O'Shaughnessy, S., & Pakdel, A. (2022) · Nano Energy · doi:10.1016/j.nanoen.2021.106774 · Cited by 198
“[102] tuned the TE properties through dedoping with hydrophilic solvents like EG.”
BackgroundMethodIonic thermoelectric materials and devices
Zhao, D., Würger, A., & Crispin, X. (2021) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2021.02.022 · Cited by 188
Mai, C.-K., Schlitz, R. A., Su, G. M., Spitzer, D., Wang, X., Fronk, S. L., Cahill, D. G., Chabinyc, M. L., & Bazan, G. C. (2014) · Journal of the American Chemical Society · doi:10.1021/ja504284r · Cited by 190
Advances in n‐Type Organic Thermoelectric Materials and Devices
Sun, Y., Di, C., Xu, W., & Zhu, D. (2019) · Advanced Electronic Materials · doi:10.1002/aelm.201800825 · Cited by 190
Spray-printed CNT/P3HT organic thermoelectric films and power generators
Hong, C. T., Kang, Y. H., Ryu, J., Cho, S. Y., & Jang, K.-S. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta06096f · Cited by 188
Wang, Y., Nakano, M., Michinobu, T., Kiyota, Y., Mori, T., & Takimiya, K. (2017) · Macromolecules · doi:10.1021/acs.macromol.6b02313 · Cited by 184
Zhao, X., Madan, D., Cheng, Y., Zhou, J., Li, H., Thon, S. M., Bragg, A. E., DeCoster, M. E., Hopkins, P. E., & Katz, H. E. (2017) · Advanced Materials · doi:10.1002/adma.201606928 · Cited by 186
Jiang, F., Xiong, J., Zhou, W., Liu, C., Wang, L., Zhao, F., Liu, H., & Xu, J. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta00305b · Cited by 184
Varghese, T., Dun, C., Kempf, N., Saeidi‐Javash, M., Karthik, C., Richardson, J., Hollar, C., Estrada, D., & Zhang, Y. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201905796 · Cited by 182
Choi, J., Lee, J. Y., Lee, S., Park, C. R., & Kim, H. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502181 · Cited by 185
High-performance, flexible, and ultralong crystalline thermoelectric fibers
Zhang, T., Li, K., Zhang, J., Chen, M., Wang, Z., Ma, S., Zhang, N., & Wei, L. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.09.019 · Cited by 186
Ultrahigh thermoelectric power factor in flexible hybrid inorganic-organic superlattice
Wan, C., Tian, R., Kondou, M., Yang, R., Zong, P., & Koumoto, K. (2017) · Nature Communications · doi:10.1038/s41467-017-01149-4 · Cited by 180
Qu, S., Yao, Q., Wang, L., Chen, Z., Xu, K., Zeng, H., Shi, W., Zhang, T., Uher, C., & Chen, L. (2016) · NPG Asia Materials · doi:10.1038/am.2016.97 · Cited by 180
Song, H., & Cai, K. (2017) · Energy · doi:10.1016/j.energy.2017.01.037 · Cited by 180
Khan, Z. U., Bubnova, O., Jafari, M. J., Brooke, R., Liu, X., Gabrielsson, R., Ederth, T., Evans, D. R., Andreasen, J. W., Fahlman, M., et al. (2015) · Journal of Materials Chemistry C · doi:10.1039/c5tc01952d · Cited by 177
Thermopower measurements in molecular junctions
Rincón-García, L., Evangeli, C., Rubio-Bollinger, G., & Agraït, N. (2016) · Chemical Society Reviews · doi:10.1039/c6cs00141f · Cited by 179
Chen, R., Lee, J., Lee, W., & Li, D. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00627 · Cited by 180
Kim, J.-Y., Lee, W., Kang, Y. H., Cho, S. Y., & Jang, K.-S. (2018) · Carbon · doi:10.1016/j.carbon.2018.03.041 · Cited by 179
Recent Progress in Applications of the Cold Sintering Process for Ceramic–Polymer Composites
Guo, J., Zhao, X., Herisson De Beauvoir, T., Seo, J., Berbano, S. S., Baker, A. L., Azina, C., & Randall, C. A. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201801724 · Cited by 178
Smart Textile‐Based Personal Thermal Comfort Systems: Current Status and Potential Solutions
Tabor, J., Chatterjee, K., & Ghosh, T. K. (2020) · Advanced Materials Technologies · doi:10.1002/admt.201901155 · Cited by 174
Stretchable Nanolayered Thermoelectric Energy Harvester on Complex and Dynamic Surfaces
Yang, Y., Hu, H., Chen, Z., Wang, Z., Jiang, L., Lu, G., Li, X., Chen, R., Jin, J., Kang, H., et al. (2020) · Nano Letters · doi:10.1021/acs.nanolett.0c01225 · Cited by 177
Advances in the applications of thermoelectric generators
He, J., Li, K., Jia, L., Zhu, Y., Zhang, H., & Linghu, J. (2024) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2023.121813 · Cited by 164
Toshima, N., Oshima, K., Anno, H., Nishinaka, T., Ichikawa, S., Iwata, A., & Shiraishi, Y. (2015) · Advanced Materials · doi:10.1002/adma.201405463 · Cited by 176
Polymer thermoelectric modules screen-printed on paper
Wei, Q., Mukaida, M., Kirihara, K., Naitoh, Y., & Ishida, T. (2014) · RSC Adv. · doi:10.1039/c4ra04946b · Cited by 174
Recent progress of organic and hybrid thermoelectric materials
Toshima, N. (2017) · Synthetic Metals · doi:10.1016/j.synthmet.2016.12.017 · Cited by 171
Enhancement of thermoelectric performance of PEDOT:PSS films by post-treatment with a superacid
Wang, X., Kyaw, A. K. K., Yin, C., Wang, F., Zhu, Q., Tang, T., Yee, P. I., & Xu, J. (2018) · RSC Advances · doi:10.1039/c8ra02058b · Cited by 170
Li, F., Liu, Y., Shi, X., Li, H., Wang, C., Zhang, Q., Ma, R., & Liang, J. (2020) · Nano Letters · doi:10.1021/acs.nanolett.0c02519 · Cited by 176
Free‐Standing Conducting Polymer Films for High‐Performance Energy Devices
Li, Z., Ma, G., Ge, R., Qin, F., Dong, X., Meng, W., Liu, T., Tong, J., Jiang, F., Zhou, Y., et al. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201509033 · Cited by 174
Zheng, Y., Zhang, Q., Jin, W., Jing, Y., Chen, X., Han, X., Bao, Q., Liu, Y., Wang, X., Wang, S., et al. (2020) · Journal of Materials Chemistry A · doi:10.1039/c9ta12494b · Cited by 169
Self-citationRecent progress in thermoelectric materials
Han, C., Li, Z., & Dou, S. (2014) · Chinese Science Bulletin · doi:10.1007/s11434-014-0237-2 · Cited by 168
“[150, 156] concluded that reducing the dopant concentration (represented by the product of the subunit volume ratio and the subunit concentration ratio) is as important as optimizing carrier concentration to maximize ZT for organic semiconductors.”
BackgroundYoo, D., Kim, J., Lee, S. H., Cho, W., Choi, H. H., Kim, F. S., & Kim, J. H. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta06710j · Cited by 171
Patel, S. N., Glaudell, A. M., Kiefer, D., & Chabinyc, M. L. (2016) · ACS Macro Letters · doi:10.1021/acsmacrolett.5b00887 · Cited by 166
N‐Type Organic Thermoelectrics: Improved Power Factor by Tailoring Host–Dopant Miscibility
Liu, J., Qiu, L., Portale, G., Koopmans, M., ten Brink, G., Hummelen, J. C., & Koster, L. J. A. (2017) · Advanced Materials · doi:10.1002/adma.201701641 · Cited by 173
Zhang, F., Qu, G., Mohammadi, E., Mei, J., & Diao, Y. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201701117 · Cited by 166
Highly Conductive Hydrogel Polymer Fibers toward Promising Wearable Thermoelectric Energy Harvesting
Liu, J., Jia, Y., Jiang, Q., Jiang, F., Li, C., Wang, X., Liu, P., Liu, P., Hu, F., Du, Y., et al. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b15332 · Cited by 170
Chemical potential–electric double layer coupling in conjugated polymer–polyelectrolyte blends
Tybrandt, K., Zozoulenko, I. V., & Berggren, M. (2017) · Science Advances · doi:10.1126/sciadv.aao3659 · Cited by 164
“Recently, there has been a significant interest in using and exploring CP-PE blends in aqueous applications for organic biosensors and bioelectronics (8), electrochromic displays (9), neuromorphic computing (10), and energy conversion (11) and storage (12).”
BackgroundEffective Solution‐ and Vacuum‐Processed n‐Doping by Dimers of Benzimidazoline Radicals
Naab, B. D., Zhang, S., Vandewal, K., Salleo, A., Barlow, S., Marder, S. R., & Bao, Z. (2014) · Advanced Materials · doi:10.1002/adma.201400668 · Cited by 166
Polymer composites-based thermoelectric materials and devices
Wang, L., Liu, Y., Zhang, Z., Wang, B., Qiu, J., Hui, D., & Wang, S. (2017) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2017.04.019 · Cited by 167
Zeng, Y., Wu, D., Cao, X., Zhou, W., Tang, L., & Chen, K. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201903873 · Cited by 163
Polypyrrole/Graphene/Polyaniline Ternary Nanocomposite with High Thermoelectric Power Factor
Wang, Y., Yang, J., Wang, L., Du, K., Yin, Q., & Yin, Q. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b05357 · Cited by 163
Ion Electron–Coupled Functionality in Materials and Devices Based on Conjugated Polymers
Berggren, M., Crispin, X., Fabiano, S., Jonsson, M. P., Simon, D. T., Stavrinidou, E., Tybrandt, K., & Zozoulenko, I. (2019) · Advanced Materials · doi:10.1002/adma.201805813 · Cited by 163
Understanding the Effects of Molecular Dopant on n‐Type Organic Thermoelectric Properties
Un, H., Gregory, S. A., Mohapatra, S. K., Xiong, M., Longhi, E., Lu, Y., Rigin, S., Jhulki, S., Yang, C., Timofeeva, T. V., et al. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201900817 · Cited by 163
Flexible Organic Solar Cells: Progress and Challenges
Sun, Y., Liu, T., Kan, Y., Gao, K., Tang, B., & Li, Y. (2021) · Small Science · doi:10.1002/smsc.202100001 · Cited by 163
Soft Fiber Electronics Based on Semiconducting Polymer
Sun, F., Jiang, H., Wang, H., Zhong, Y., Xu, Y., Xing, Y., Yu, M., Feng, L.-W., Tang, Z., Liu, J., et al. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00720 · Cited by 164
Thermal–Electric Nanogenerator Based on the Electrokinetic Effect in Porous Carbon Film
Liu, K., Ding, T., Li, J., Chen, Q., Xue, G., Yang, P., Xu, M., Wang, Z. L., & Zhou, J. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702481 · Cited by 161
Liu, S., Li, H., & He, C. (2019) · Carbon · doi:10.1016/j.carbon.2019.04.007 · Cited by 160
Bi0.5Sb1.5Te3/PEDOT:PSS-based flexible thermoelectric film and device
Wang, Y., Hong, M., Liu, W.-D., Shi, X.-L., Xu, S.-D., Sun, Q., Gao, H., Lu, S., Zou, J., & Chen, Z.-G. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.125360 · Cited by 162
Photocatalytic doping of organic semiconductors
Jin, W., Yang, C., Pau, R., Wang, Q., Tekelenburg, E. K., Wu, H., Wu, Z., Jeong, S. Y., Pitzalis, F., Liu, T., et al. (2024) · Nature · doi:10.1038/s41586-024-07400-5 · Cited by 162
“26), high electrical conductivity after doping (greater than 1 S cm –1 ) 30 and high ion permeability 52 .”
A solution-processed TiS 2 /organic hybrid superlattice film towards flexible thermoelectric devices
Tian, R., Wan, C., Wang, Y., Wei, Q., Ishida, T., Yamamoto, A., Tsuruta, A., Shin, W., Li, S., & Koumoto, K. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta08838d · Cited by 159
Lang, A. W., Li, Y., De Keersmaecker, M., Shen, D. E., Österholm, A. M., Berglund, L., & Reynolds, J. R. (2018) · ChemSusChem · doi:10.1002/cssc.201702026 · Cited by 160
A PEDOT:PSS thermoelectric fiber generator
Liu, L., Chen, J., Liang, L., Deng, L. P., & Chen, G. (2022) · Nano Energy · doi:10.1016/j.nanoen.2022.107678 · Cited by 158
Zhang, L., Lin, S., Hua, T., Huang, B., Liu, S., & Tao, X. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700524 · Cited by 157
Enhanced thermoelectric performance of PEDOT:PSS/PANI–CSA polymer multilayer structures
Lee, H. J., Anoop, G., Lee, H. J., Kim, C., Park, J., Choi, J., Kim, H., Kim, Y., Lee, E. J., Lee, S., et al. (2016) · Energy & Environmental Science · doi:10.1039/c5ee03063c · Cited by 155
Semi-metallic, strong and stretchable wet-spun conjugated polymer microfibers
Zhou, J. P., Li, E. Q., Li, R., Xu, X., Ventura, I. A., Moussawi, A., Anjum, D. H., Hedhili, M. N., Smilgies, D., Gilles Lubineau, A., et al. (2015) · Journal of Materials Chemistry C · doi:10.1039/c4tc02354d · Cited by 153
Wearable fiber-based thermoelectrics from materials to applications
Chen, W., Shi, X., Zou, J., & Chen, Z. (2020) · Nano Energy · doi:10.1016/j.nanoen.2020.105684 · Cited by 152
Xiong, J., Jiang, F., Shi, H., Xu, J., Liu, C., Zhou, W., Jiang, Q., Zhu, Z., & Hu, Y. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b03692 · Cited by 150
Present and future thermoelectric materials toward wearable energy harvesting
Li, C., Jiang, F., Liu, C., Liu, P., & Xu, J. (2019) · Applied Materials Today · doi:10.1016/j.apmt.2019.04.007 · Cited by 153
Dun, C., Hewitt, C. A., Huang, H., Xu, J., Zhou, C., Huang, W., Cui, Y., Zhou, W., Jiang, Q., & Carroll, D. (2015) · Nano Energy · doi:10.1016/j.nanoen.2015.10.012 · Cited by 154
Recent progress in tuning polymer oriented microstructures for enhanced thermoelectric performance
Deng, L. P., & Chen, G. (2020) · Nano Energy · doi:10.1016/j.nanoen.2020.105448 · Cited by 149
Wang, Y., Zhang, S. M., & Deng, Y. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta01140c · Cited by 147
Metadata
- Authors
- Kim, G.-H., Shao, L., Zhang, K., & Pipe, K. P.
- Affiliations
- University of Michigan (US)
- Corresponding author
- Pipe, K. P.
- ORCID
- Venue
- Nature Materials
- Published
- 2013-05-05
- Volume
- 12
- Issue
- 8
- Pages
- 719-723
- ISSN
- 1476-1122 (ISSN-L)
- 1476-4660
- OpenAlex
- W2001566902
- Cited by
- 1,688
- References
- 16
- Citations by year
- 2026: 65 · 2025: 90 · 2024: 106 · 2023: 115 · 2022: 120 · 2021: 187 · 2020: 172 · 2019: 178 · 2018: 160 · 2017: 147 · 2016: 155 · 2015: 113 · 2014: 69 · 2013: 11
- FWCI
- 52.38
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.springer.com/tdm (tdm)
- www.springer.com/tdm (vor)
- Locations
- Nature Materials (publishedVersion)
- PubMed (publishedVersion)
- Scholarworks@UNIST (Ulsan National Institute of Science and Technology) (submittedVersion)
- Funders
- U.S. Department of Energy (DESC0000957)
- Basic Energy Sciences
- Energy Frontier Research Centers
- Topics
- Physical Sciences › Materials Science › Materials Chemistry › Advanced Thermoelectric Materials and Devices
- Physical Sciences › Materials Science › Materials Chemistry › Thermal properties of materials
- Physical Sciences › Materials Science › Polymers and Plastics › Conducting polymers and applications
- Keywords
- organic thermoelectrics, organic semiconductors, dopant engineering, figure of merit ZT, PEDOT:PSS, PEDOT, Seebeck coefficient, electrical conductivity, carrier concentration, conducting polymers, nanostructured materials
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.