Engineered doping of organic semiconductors for enhanced thermoelectric efficiency
The DOI matches its Crossref record; 16 of the 16 references it cites were found in a registry or an index.
Abstract
Significant improvements to the thermoelectric figure of merit ZT have emerged in recent years, primarily due to the engineering of material composition and nanostructure in inorganic semiconductors (ISCs). However, many present high-ZT materials are based on low-abundance elements that pose challenges for scale-up, as they entail high material costs in addition to brittleness and difficulty in large-area deposition. Here we demonstrate a strategy to improve ZT in conductive polymers and other organic semiconductors (OSCs) for which the base elements are earth-abundant. By minimizing total dopant volume, we show that all three parameters constituting ZT vary in a manner so that ZT increases; this stands in sharp contrast to ISCs, for which these parameters have trade-offs. Reducing dopant volume is found to be as important as optimizing carrier concentration when maximizing ZT in OSCs. Implementing this strategy with the dopant poly(styrenesulphonate) in poly(3,4-ethylenedioxythiophene), we achieve ZT = 0.42 at room temperature.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Various soft conductive materials such as thin metal,[106] conductive polymers,[508] nanomaterials,[509] etc. can be thermally actuated in the form of resistors.”
From Flexible Electronics and Devices as Human–Machine Interfaces for Medical Robotics (2022) · cites this paper as [508]
Citations
Cites
Cooling, Heating, Generating Power, and Recovering Waste Heat with Thermoelectric Systems
Bell, L. E. (2008) · Science · doi:10.1126/science.1158899 · Cited by 6,082
Bubnova, O., Khan, Z. U., Malti, A., Braun, S., Fahlman, M., Berggren, M., & Crispin, X. (2011) · Nature Materials · doi:10.1038/nmat3012 · Cited by 1,769
Kim, Y. H., Sachse, C., Machala, M. L., May, C., Müller‐Meskamp, L., & Leo, K. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201002290 · Cited by 1,458
Xia, Y., Sun, K., & Ouyang, J. (2012) · Advanced Materials · doi:10.1002/adma.201104795 · Cited by 1,124
PEDOT: Principles and Applications of an Intrinsically Conductive Polymer
Elschner, A., Kirchmeyer, S., Lovenich, W., Merker, U., & Reuter, K. (2010) · CRC Press eBooks · doi:10.1201/b10318 · Cited by 758
Microscopic Understanding of the Anisotropic Conductivity of PEDOT:PSS Thin Films
Nardes, A. M., Kemerink, M., Janssen, R. A. J., Bastiaansen, J. A. M., Kiggen, N. M. M., Langeveld, B. M. W., van Breemen, A. J. J. M., & de Kok, M. M. (2007) · Advanced Materials · doi:10.1002/adma.200602575 · Cited by 539
Zhang, B., Sun, J., Katz, H. E., Fang, F., & Opila, R. L. (2010) · ACS Applied Materials & Interfaces · doi:10.1021/am100654p · Cited by 480
Microscopical Investigations of PEDOT:PSS Thin Films
Lang, U., Müller, E., Naujoks, N., & Dual, J. (2009) · Advanced Functional Materials · doi:10.1002/adfm.200801258 · Cited by 457
Poly(3,4-ethylenedioxythiophene) as promising organic thermoelectric materials: A mini-review
Yue, R., & Xu, J. (2012) · Synthetic Metals · doi:10.1016/j.synthmet.2012.04.005 · Cited by 275
Koh, Y. K., Singer, S. L., Kim, W., Zide, J. M. O., Lu, H., Cahill, D. G., Majumdar, A., & Gossard, A. C. (2009) · Journal of Applied Physics · doi:10.1063/1.3078808 · Cited by 205
Cited by
Items 801–900 of 1,000
Thermoelectric Properties of Polypyrrole Nanotubes
Wang, Y., Yin, Q., Du, K., Mo, S., & Yin, Q. (2020) · Macromolecular Research · doi:10.1007/s13233-020-8105-1 · Cited by 28
Fabrication of PEDOT:PSS/Ag2Se Nanowires for Polymer-Based Thermoelectric Applications
Park, D., Kim, M., & Kim, J. (2020) · Polymers · doi:10.3390/polym12122932 · Cited by 28
“The synthesized NWs were dispersed in the DMSO-treated PEDOT:PSS solution and sonicated to obtain a uniform distribution.”
MethodResultInfluentialPaulraj, I., Lourdhusamy, V., & Liu, C. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2022.137083 · Cited by 28
Powell, D., & Whittaker‐Brooks, L. (2022) · Materials Horizons · doi:10.1039/d2mh00279e · Cited by 30
High Performance Fully Inkjet-Printed Organic Electrochemical Transistor (OECT) Biosensor
AlChamaa, W., & Khraiche, M. L. (2022) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ac88fa · Cited by 28
A short account of thermoelectric film characterization techniques
Nandihalli, N. (2023) · Materials Today Physics · doi:10.1016/j.mtphys.2023.101173 · Cited by 28
Flexible Carbon Nanotube‐Epitaxially Grown Nanocrystals for Micro‐Thermoelectric Modules
Jin, Q., Zhao, Y., Long, X., Jiang, S., Qian, C., Ding, F., Wang, Z., Li, X., Yu, Z., He, J., et al. (2023) · Advanced Materials · doi:10.1002/adma.202304751 · Cited by 28
Zhu, Z., Liu, C., Jiang, Q., Shi, H., Jiang, F., Xu, J., Xiong, J., & Liu, E. (2015) · Journal of Materials Science Materials in Electronics · doi:10.1007/s10854-015-3523-0 · Cited by 28
Beretta, D., Bruno, P., Lanzani, G., & Caironi, M. (2015) · Review of Scientific Instruments · doi:10.1063/1.4926885 · Cited by 28
Sarabia‐Riquelme, R., Craddock, J. D., Morris, E., Eaton, D. L., Andrews, R. J., Anthony, J. E., & Weisenberger, M. C. (2016) · Synthetic Metals · doi:10.1016/j.synthmet.2016.11.014 · Cited by 28
Kanwat, A., & Jang, J. H. (2016) · RSC Advances · doi:10.1039/c6ra23170e · Cited by 28
Thin Film Organic Thermoelectric Generator Based on Tetrathiotetracene
Pudžs, K., Vembris, A., Rutkis, M. A., & Woodward, S. (2017) · Advanced Electronic Materials · doi:10.1002/aelm.201600429 · Cited by 28
Thermoelectric behavior of PEDOT:PSS/CNT/graphene composites
Liu, Y., Liu, H., Wang, J. P., & Zhang, X. (2017) · Journal of Polymer Engineering · doi:10.1515/polyeng-2017-0179 · Cited by 28
Assessing the anomalous superdiffusive heat transport in a single one-dimensional PEDOT chain
Crnjar, A., Melis, C., & Colombo, L. (2018) · Physical Review Materials · doi:10.1103/physrevmaterials.2.015603 · Cited by 28
Role of surfactant on thermoelectric behaviors of organic-inorganic composites
Shin, S., Roh, J. W., Kim, H., & Chen, R. (2018) · Journal of Applied Physics · doi:10.1063/1.5033920 · Cited by 29
Cao, X., Wu, D., Feng, Y., Zhou, W., Tang, L., & Chen, K. (2019) · Journal of Physics Condensed Matter · doi:10.1088/1361-648x/ab2299 · Cited by 28
Yanagishima, N., Kanehashi, S., Saito, H., Ogino, K., & Shimomura, T. (2020) · Polymer · doi:10.1016/j.polymer.2020.122912 · Cited by 28
Bi2Te3-based flexible thermoelectrics
Chen, M., Mao, Z., Ji, Y., Zong, P., & Zhang, Q. (2024) · Materials Today Energy · doi:10.1016/j.mtener.2024.101643 · Cited by 27
Poly(benzodifurandione) Coated Silk Yarn for Thermoelectric Textiles
Craighero, M., Li, Q., Zeng, Z., Choi, C., Kim, Y.-S., Yoon, H., Liu, T., Sowiński, P., Haraguchi, S., Hwang, B., et al. (2024) · Advanced Science · doi:10.1002/advs.202406770 · Cited by 27
Qin, J., Du, Y., Meng, Q., Chen, S., Hong, M., & Ke, Q. (2025) · Nature Communications · doi:10.1038/s41467-025-63390-6 · Cited by 27
Irregular hierarchical-porous polymer for high-performance soft thermoelectrics
Zhang, X., Wang, D., Liu, L., Li, Z., Ji, Z. J., Zhang, X., Xu, C., Yan, C., Wang, M., Di, Y., et al. (2026) · Science · doi:10.1126/science.adx9237 · Cited by 27
Effects of Nd concentration on structural and magnetic properties of ZnFe2O4 nanoparticles
Zhang, Y., Chen, Y., Kou, Q., Wang, Z., Han, D., Sun, Y., Yang, J., Liu, Y., & Yang, L. (2017) · Journal of Materials Science Materials in Electronics · doi:10.1007/s10854-017-8297-0 · Cited by 27
Improved thermoelectric properties of PEDOT:PSS polymer bulk prepared using spark plasma sintering
Ge, Z., Chang, Y., Li, F., Luo, J., & Fan, P. (2018) · Chemical Communications · doi:10.1039/c7cc09595c · Cited by 27
P(NDI2OD-T2) revisited – Aggregation control as key for high performance n-type applications
Gross, Y. M., & Ludwigs, S. (2019) · Synthetic Metals · doi:10.1016/j.synthmet.2019.04.017 · Cited by 27
Analysis of three-dimensional ellipsoidal inclusions in thermoelectric solids
Wang, P., Wang, B. L., Wang, K. F., HIRAKATA, H., & Zhang, C. (2019) · International Journal of Engineering Science · doi:10.1016/j.ijengsci.2019.06.005 · Cited by 27
Ding, J., Liu, Z., Zhao, W., Jin, W., Xiang, L., Wang, Z., Zeng, Y., Zou, Y., Zhang, F., Yi, Y., et al. (2019) · Angewandte Chemie · doi:10.1002/ange.201911058 · Cited by 27
Synergetic modulation of power factor and thermal conductivity for Cu3SbSe4-based system
Li, J. M., Ming, H., Song, C., Wang, L., Xin, H. X., Gu, Y., Zhang, J., Qin, X., & Li, D. (2020) · Materials Today Energy · doi:10.1016/j.mtener.2020.100491 · Cited by 27
Yan, Z., Zhao, Y., Liu, D., Zhang, Z., Zheng, Y., Cui, J., Zhang, Y., & Xue, C. (2020) · RSC Advances · doi:10.1039/d0ra08458a · Cited by 27
DMSO-treated flexible PEDOT:PSS/PANi fiber electrode for high performance supercapacitors
Liu, G., Chen, X. D., Liu, C., Jiang, Q., Jiang, F., An, J., Xu, J., & Liu, P. (2021) · Journal of Materials Science · doi:10.1007/s10853-021-06226-0 · Cited by 27
Shi, W. Y., Deng, T., Wong, Z. M., Wu, G., & Yang, S. (2021) · npj Computational Materials · doi:10.1038/s41524-021-00580-y · Cited by 27
Dopant-dependent thermoelectric performance of indoloindole-selenophene based conjugated polymer
Han, J. M., Yoon, S. E., Jung, K. H., Bae, O., Kim, D., Kim, U., Seo, H., Kim, F. S., Kim, K. C., Kim, J. H., et al. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.133779 · Cited by 27
Spinning of Stiff and Conductive Filaments from Cellulose Nanofibrils and PEDOT:PSS Nanocomplexes
Fall, A. B., Hagel, F., Edberg, J., Malti, A., Larsson, P. A., Wågberg, L., Granberg, H., & Håkansson, K. M. O. (2022) · ACS Applied Polymer Materials · doi:10.1021/acsapm.2c00073 · Cited by 27
Chen, Z., Cui, Y., Liang, L., Wang, H., Xu, W., Zhang, Q., & Chen, G. (2022) · Materials Today Nano · doi:10.1016/j.mtnano.2022.100276 · Cited by 27
Qiu, J., Yu, X., Wu, X., Wu, Z. L., Song, Y., Zheng, Q., Shan, G., Ye, H., & Du, M. (2023) · Small · doi:10.1002/smll.202205324 · Cited by 27
Tellurium/polymers for flexible thermoelectrics: status and challenges
Jin, L., Hao, Y., Tareen, A. K., Khan, K., Wageh, S., Al‐Hartomy, O. A., Al-Sehemi, A. G., Zhang, H., & Zhang, Y. (2023) · Journal of Materials Chemistry A · doi:10.1039/d2ta09517c · Cited by 27
Wang, D., Yu, H., Shi, W. Y., & Xu, C. (2023) · Accounts of Chemical Research · doi:10.1021/acs.accounts.3c00091 · Cited by 27
Interface Engineering for High-Performance Thermoelectric Carbon Nanotube Films
Zhou, Y. T., Wei, Q., Zhang, M., Nakajima, H., Okazaki, T., Yamada, T., & Hata, K. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c15704 · Cited by 27
Nanostructured Thermoelectric Materials
Liu, W., Ren, Z., & Chen, G. (2013) · Springer series in materials science · doi:10.1007/978-3-642-37537-8_11 · Cited by 36
Thermoelectrics: Carbon nanotubes get high
Xavier Crispin, A. (2016) · Nature Energy · doi:10.1038/nenergy.2016.37 · Cited by 27
Iguchi, K., Mikie, T., Saito, M., Komeyama, K., Seo, T., Ie, Y., & Osaka, I. (2021) · Chemistry of Materials · doi:10.1021/acs.chemmater.1c00204 · Cited by 27
Kochergin, Y. S., Villa, K., Nemeškalová, A., Kuchař, M., & Pumera, M. (2021) · ACS Nano · doi:10.1021/acsnano.1c08136 · Cited by 27
Efficient molecular doping of polymeric semiconductors improved by coupled reaction
Pan, J., Wang, J., Li, K., Dai, X., Li, Q., Chong, D., Chen, B., Yan, J., & Wang, H. (2024) · Nature Communications · doi:10.1038/s41467-024-50293-1 · Cited by 26
Lee, W., Song, M., Park, S., Nam, S., Seo, J., Kim, H., & Kim, Y. (2016) · Scientific Reports · doi:10.1038/srep33795 · Cited by 26
Thermoelectric all-carbon heterostructures for a flexible thermoelectric generator
Hwang, H., & Jang, K. (2020) · Sustainable Energy & Fuels · doi:10.1039/d0se01591a · Cited by 26
Atomistic Modeling of PEDOT:PSS Complexes II: Force Field Parameterization
Michaels, W., Zhao, Y., & Qin, J. (2021) · Macromolecules · doi:10.1021/acs.macromol.1c00860 · Cited by 26
Recent advancements in thermoelectric generators for smart textile application
Newby, S., Mirihanage, W. U., & Fernando, A. (2022) · Materials Today Communications · doi:10.1016/j.mtcomm.2022.104585 · Cited by 26
All‐Printed Flexible Hygro‐Thermoelectric Paper Generator
Shen, H., Xu, K., Duan, Y., Wu, P., Qian, Z., Chen, Y., Luo, Y., Liu, C., Li, Y., Cui, J., et al. (2023) · Advanced Science · doi:10.1002/advs.202206483 · Cited by 26
High Performance and Colorful Polymer Thermoelectrics with Imprinted Porous Film
Zhao, Y., Li, Z., Wang, D., Zhang, X., Ji, Z., Niu, L., Di, Y., Guan, Y., Liu, L., Zou, Y., et al. (2024) · Advanced Materials · doi:10.1002/adma.202407692 · Cited by 26
Wang, L., Jiang, F., Xiong, J., Xu, J., Zhou, W., Liu, C., Shi, H., & Jiang, Q. (2015) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2015.01.015 · Cited by 26
Hu, Y., Zhu, D., Zhu, Z., Liu, E., Lu, B., Xu, J., Zhao, F. Q., Hou, J., Liu, H., & Jiang, F. (2016) · ChemPhysChem · doi:10.1002/cphc.201600233 · Cited by 26
Highly electrically conductive polyethylenedioxythiophene thin films for thermoelectric applications
Yi, C., Zhang, L., Hu, R., Chuang, S. S. C., Zheng, J., & Gong, X. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta04122a · Cited by 26
Highly Flexible and Conductive Glycerol-Doped PEDOT:PSS Films Prepared Under an Electric Field
Yamaguchi, H., Aizawa, K., Chonan, Y., Komiyama, T., 青山, 隆., Sakai, E., Qiu, J., & Sato, N. (2018) · Journal of Electronic Materials · doi:10.1007/s11664-018-6292-8 · Cited by 26
Wang, L., Pan, C., Chen, Z., Zhou, X., Gao, C., & Wang, L. (2018) · Polymer Chemistry · doi:10.1039/c8py00812d · Cited by 26
Ju, H., Park, D., & Kim, J. (2019) · Nanoscale · doi:10.1039/c9nr04712c · Cited by 26
Thermal conductivity study of micrometer-thick thermoelectric films by using three-omega methods
Zhou, A., Wang, W., Yang, B., Li, J., & Zhao, Q. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.12.145 · Cited by 25
Xu, K., Gao, C., Chen, G., & Qiu, D. (2016) · Organic Electronics · doi:10.1016/j.orgel.2016.01.013 · Cited by 25
Myint, M. T. Z., Hada, M., Inoue, H., Marui, T., Nishikawa, T., Nishina, Y., Ichimura, S., Umeno, M., Kyaw, A. K. K., & Hayashi, Y. (2018) · RSC Advances · doi:10.1039/c8ra06094k · Cited by 25
Mukaida, M., Kirihara, K., & Wei, Q. (2019) · ACS Applied Energy Materials · doi:10.1021/acsaem.9b01342 · Cited by 25
A Highly Conductive Conjugated Polyelectrolyte for Flexible Organic Thermoelectrics
Kee, S., Haque, M. A., Lee, Y., Nguyen, T. L., Villalva, D. R., Troughton, J., Emwas, A.-H. M., Alshareef, H. N., Woo, H. Y., & Baran, D. (2020) · ACS Applied Energy Materials · doi:10.1021/acsaem.0c01213 · Cited by 25
Anisotropic thermal conductivity measurement of organic thin film with bidirectional 3ω method
Yamaguchi, S., Shiga, T., Ishioka, S., Saito, T., Kodama, T., & Shiomi, J. (2021) · Review of Scientific Instruments · doi:10.1063/5.0030982 · Cited by 25
Liu, D., Yan, Z., Zhao, Y., Zhang, Z., Zhang, B., Shi, P., & Xue, C. (2021) · Results in Physics · doi:10.1016/j.rinp.2021.105061 · Cited by 25
Cao, G., Nie, X., Ren, Z., Wu, Y., Yang, J., Wei, J., Wu, J., Wang, L., & Gao, C. (2022) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.2c03575 · Cited by 25
Vacancy controlled n–p conduction type transition in CuAgSe with superior thermoelectric performance
Tian, Y. P., Ning, S., Zhang, T., Chen, X., Liu, Q., Qi, N., Chen, Z., Su, X., & Tang, X. (2023) · Journal of Materials Chemistry A · doi:10.1039/d2ta08923h · Cited by 25
Lee, H., Lee, S. B., Kim, Y., Kim, H., Kim, M.-J., Yoon, T. W., Lee, D., Cho, J. H., Kim, Y., & Kang, B. (2023) · Chemical Engineering Journal · doi:10.1016/j.cej.2023.143654 · Cited by 25
Wang, Z., Zhang, C., Li, Y., Liang, J., Zhang, J., Liu, Z., Wan, C., & Zong, P. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c06680 · Cited by 25
Huang, M., Lee, S., Jo, I., Park, H., Shim, B. S., & Yoon, M. (2023) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2023.121559 · Cited by 25
Datta, R. S., Said, S. M., Shahrir, S. R., Abdullah, N., Sabri, M. F. M., Balamurugan, S., Miyazaki, Y., Hayashi, K., Hashim, N. A., Habiba, U., et al. (2015) · RSC Advances · doi:10.1039/c5ra03935e · Cited by 25
Two soluble polymers with lower ionization potentials: doping and thermoelectric properties
Zhang, Q., Sun, Y., Qin, Y., Xu, W., & Zhu, D. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta07526b · Cited by 25
Performance and Design Comparison of a Bulk Thermoelectric Cooler With a Hybrid Architecture
Antonik, M., O’Connor, B. T., & Ferguson, S. (2016) · Journal of Thermal Science and Engineering Applications · doi:10.1115/1.4032637 · Cited by 25
Energy Harvesting Based on Polymer
Peng, H., Sun, X., Weng, W., & Fang, X. (2016) · Elsevier eBooks · doi:10.1016/b978-0-12-811091-1.00005-7 · Cited by 25
Ma, Y., Vartak, P. B., Nagaraj, P., & Wang, R. Y. (2016) · RSC Advances · doi:10.1039/c6ra15929j · Cited by 25
Oshima, K., Yanagawa, Y., Asano, H., Shiraishi, Y., & Toshima, N. (2017) · Synthetic Metals · doi:10.1016/j.synthmet.2016.12.019 · Cited by 25
Synthesis of n-type Mg2Si/CNT Thermoelectric Nanofibers
Kikuchi, K., YAMAMOTO, K., Nomura, N., & Kawasaki, A. (2017) · Nanoscale Research Letters · doi:10.1186/s11671-017-2120-y · Cited by 25
Effective thermoelectric conversion properties of thermoelectric composites containing a crack/hole
Wang, P., Wang, K. F., Wang, B. L., & Cui, Y. J. (2018) · Composite Structures · doi:10.1016/j.compstruct.2018.02.049 · Cited by 25
Liu, Y., Shi, W. Y., Zhao, T., Wang, D., & Shuai, Z. (2019) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.9b00716 · Cited by 25
Flexible thermoelectric power generators fabricated using graphene/PEDOT:PSS nanocomposite films
Liu, X., Du, Y., Meng, Q., Shen, S., & Xu, J. (2019) · Journal of Materials Science Materials in Electronics · doi:10.1007/s10854-019-02280-2 · Cited by 25
Enhanced thermoelectric properties of two-dimensional conjugated polymers
Meng, T., Yi, C., Liu, L., Karim, A., & Gong, X. (2018) · Emergent Materials · doi:10.1007/s42247-018-0002-4 · Cited by 24
Kirihara, K., Wei, Q., Mukaida, M., & Ishida, T. (2018) · Synthetic Metals · doi:10.1016/j.synthmet.2018.11.005 · Cited by 24
Kim, S., Mo, J.-H., & Jang, K. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c12766 · Cited by 24
PEDOT:PSS-polyethylene oxide composites for stretchable and 3D-Printed thermoelectric devices
Li, H., Mao, P., Davis, M., & Yu, Z. (2020) · Composites Communications · doi:10.1016/j.coco.2020.100599 · Cited by 24
Geng, W., Lu, X., Zhang, H., Luo, Y., Wang, Z., Guo, S.-F., Zhou, Z., & Zhang, D. (2022) · Separation and Purification Technology · doi:10.1016/j.seppur.2022.120829 · Cited by 24
Kumari, A., Nag, A., & Kumar, J. (2022) · Computational Materials Science · doi:10.1016/j.commatsci.2022.111925 · Cited by 24
Tsai, C., Tung, S., Lin, J., & Liu, C. (2023) · Journal of Materials Chemistry A · doi:10.1039/d3ta05836k · Cited by 24
Xu, Y., Li, Z., Wu, L., Dou, H., & Zhang, X. (2024) · Nano-Micro Letters · doi:10.1007/s40820-023-01292-2 · Cited by 24
“The traditional solid-state thermoelectrics (s-TEs) still suffer from the insufficient thermopower with only about 200 μV K −1 [4, 5].”
BackgroundInsight into Carrier and Phonon Transports of PbSnS 2 Crystals
Zhan, S., Bai, S., Qiu, Y., Zheng, L., Wang, S., Zhu, Y., Tan, Q., & Zhao, L. (2024) · Advanced Materials · doi:10.1002/adma.202412967 · Cited by 24
Rathi, V., Singh, K. K., Parmar, K. P. S., Brajpuriya, R., & Kumar, A. (2024) · RSC Advances · doi:10.1039/d4ra06184e · Cited by 24
Anno, H., Nishinaka, T., Hokazono, M., Oshima, N., & Toshima, N. (2015) · Journal of Electronic Materials · doi:10.1007/s11664-015-3668-x · Cited by 24
Thermoelectric performance of Cu intercalated layered TiSe2 above 300 K
Bhatt, R., Bhattacharya, S., Patel, M., Basu, R., Singh, A., Sürger, C., NAVANEETHAN, M., Hayakawa, Y., Aswal, D. K., & Gupta, S. K. (2013) · Journal of Applied Physics · doi:10.1063/1.4821798 · Cited by 24
Wang, X., Feng, G.-Y., & Ge, M. (2017) · Journal of Materials Science · doi:10.1007/s10853-017-0756-8 · Cited by 26
Structural and Morphological Evolution for Water-resistant Organic Thermoelectrics
Oh, H. J., Jang, J. G., Kim, J., Hong, J., Kim, J., Kwak, J., Kim, S. H., & Shin, S. (2017) · Scientific Reports · doi:10.1038/s41598-017-13726-0 · Cited by 24
Wang, Y., Wu, S., Yin, Q., Jiang, B., & Mo, S. (2020) · Polymer · doi:10.1016/j.polymer.2020.123131 · Cited by 24
Qu, S., Chen, M., Yao, Q., Lu, W., Zeng, K., Shi, W., Shi, X., Uher, C., & Chen, L. (2018) · Polymers · doi:10.3390/polym10080815 · Cited by 24
“The traditional conducting polymers such as poly(3,4-ethylenedioxythiophene) (PEDOT) and polyaniline (PANI) have been reported to exhibit high TE performance [7,8].”
PEDOT:PSS-based high-performance thermoelectrics
Kim, D. (2024) · Macromolecular Research · doi:10.1007/s13233-024-00309-y · Cited by 23
Tang, H., Xu, Z., Liang, Y., Cui, W., Chen, Y., Jiang, Q., Lei, T., Ma, Y., & Huang, F. (2024) · Angewandte Chemie International Edition · doi:10.1002/anie.202415349 · Cited by 23
Zhang, Y., Zhang, L., Wang, Z., & Chen, G. (2025) · EnergyChem · doi:10.1016/j.enchem.2025.100181 · Cited by 23
Ireland, R. M., Liu, Y., Guo, X. W., Cheng, Y., Kola, S., Wang, W., Jones, T., Yang, R., Falk, M. L., & Katz, H. E. (2015) · Advanced Science · doi:10.1002/advs.201500015 · Cited by 23
Yang, J., Jiang, Q., Zhang, J., Xu, J., Liu, J., Liu, P., Liu, G., Wang, Y., & Jiang, F. (2020) · Synthetic Metals · doi:10.1016/j.synthmet.2020.116546 · Cited by 23
Soft Ionics: Governing Physics and State of Technologies
Tepermeister, M., Bosnjak, N., Dai, J., Zhang, X., Kielar, S. M., Wang, Z., Tian, Z., Suntivich, J., & Silberstein, M. N. (2022) · Frontiers in Physics · doi:10.3389/fphy.2022.890845 · Cited by 26
Design of room-temperature infrared photothermoelectric detectors based on CNT/PEDOT:PSS composites
Wang, J., Xie, Z., Liu, J. A., & Yeow, J. T. W. (2022) · Journal of Materials Chemistry C · doi:10.1039/d2tc03159k · Cited by 23
Recent Progress in Colloidal Quantum Dot Thermoelectrics
Nugraha, M. I., Indriyati, I., Primadona, I., Gedda, M., Timuda, G. E., Iskandar, F., & Anthopoulos, T. D. (2023) · Advanced Materials · doi:10.1002/adma.202210683 · Cited by 23
Metadata
- Authors
- Kim, G.-H., Shao, L., Zhang, K., & Pipe, K. P.
- Affiliations
- University of Michigan (US)
- Corresponding author
- Pipe, K. P.
- ORCID
- Venue
- Nature Materials
- Published
- 2013-05-05
- Volume
- 12
- Issue
- 8
- Pages
- 719-723
- ISSN
- 1476-1122 (ISSN-L)
- 1476-4660
- OpenAlex
- W2001566902
- Cited by
- 1,688
- References
- 16
- Citations by year
- 2026: 65 · 2025: 90 · 2024: 106 · 2023: 115 · 2022: 120 · 2021: 187 · 2020: 172 · 2019: 178 · 2018: 160 · 2017: 147 · 2016: 155 · 2015: 113 · 2014: 69 · 2013: 11
- FWCI
- 52.38
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.springer.com/tdm (tdm)
- www.springer.com/tdm (vor)
- Locations
- Nature Materials (publishedVersion)
- PubMed (publishedVersion)
- Scholarworks@UNIST (Ulsan National Institute of Science and Technology) (submittedVersion)
- Funders
- U.S. Department of Energy (DESC0000957)
- Basic Energy Sciences
- Energy Frontier Research Centers
- Topics
- Physical Sciences › Materials Science › Materials Chemistry › Advanced Thermoelectric Materials and Devices
- Physical Sciences › Materials Science › Materials Chemistry › Thermal properties of materials
- Physical Sciences › Materials Science › Polymers and Plastics › Conducting polymers and applications
- Keywords
- organic thermoelectrics, organic semiconductors, dopant engineering, figure of merit ZT, PEDOT:PSS, PEDOT, Seebeck coefficient, electrical conductivity, carrier concentration, conducting polymers, nanostructured materials
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.