Engineered doping of organic semiconductors for enhanced thermoelectric efficiency
The DOI matches its Crossref record; 16 of the 16 references it cites were found in a registry or an index.
Abstract
Significant improvements to the thermoelectric figure of merit ZT have emerged in recent years, primarily due to the engineering of material composition and nanostructure in inorganic semiconductors (ISCs). However, many present high-ZT materials are based on low-abundance elements that pose challenges for scale-up, as they entail high material costs in addition to brittleness and difficulty in large-area deposition. Here we demonstrate a strategy to improve ZT in conductive polymers and other organic semiconductors (OSCs) for which the base elements are earth-abundant. By minimizing total dopant volume, we show that all three parameters constituting ZT vary in a manner so that ZT increases; this stands in sharp contrast to ISCs, for which these parameters have trade-offs. Reducing dopant volume is found to be as important as optimizing carrier concentration when maximizing ZT in OSCs. Implementing this strategy with the dopant poly(styrenesulphonate) in poly(3,4-ethylenedioxythiophene), we achieve ZT = 0.42 at room temperature.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Various soft conductive materials such as thin metal,[106] conductive polymers,[508] nanomaterials,[509] etc. can be thermally actuated in the form of resistors.”
From Flexible Electronics and Devices as Human–Machine Interfaces for Medical Robotics (2022) · cites this paper as [508]
Citations
Cites
Cooling, Heating, Generating Power, and Recovering Waste Heat with Thermoelectric Systems
Bell, L. E. (2008) · Science · doi:10.1126/science.1158899 · Cited by 6,082
Bubnova, O., Khan, Z. U., Malti, A., Braun, S., Fahlman, M., Berggren, M., & Crispin, X. (2011) · Nature Materials · doi:10.1038/nmat3012 · Cited by 1,769
Kim, Y. H., Sachse, C., Machala, M. L., May, C., Müller‐Meskamp, L., & Leo, K. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201002290 · Cited by 1,458
Xia, Y., Sun, K., & Ouyang, J. (2012) · Advanced Materials · doi:10.1002/adma.201104795 · Cited by 1,124
PEDOT: Principles and Applications of an Intrinsically Conductive Polymer
Elschner, A., Kirchmeyer, S., Lovenich, W., Merker, U., & Reuter, K. (2010) · CRC Press eBooks · doi:10.1201/b10318 · Cited by 758
Microscopic Understanding of the Anisotropic Conductivity of PEDOT:PSS Thin Films
Nardes, A. M., Kemerink, M., Janssen, R. A. J., Bastiaansen, J. A. M., Kiggen, N. M. M., Langeveld, B. M. W., van Breemen, A. J. J. M., & de Kok, M. M. (2007) · Advanced Materials · doi:10.1002/adma.200602575 · Cited by 539
Zhang, B., Sun, J., Katz, H. E., Fang, F., & Opila, R. L. (2010) · ACS Applied Materials & Interfaces · doi:10.1021/am100654p · Cited by 480
Microscopical Investigations of PEDOT:PSS Thin Films
Lang, U., Müller, E., Naujoks, N., & Dual, J. (2009) · Advanced Functional Materials · doi:10.1002/adfm.200801258 · Cited by 457
Poly(3,4-ethylenedioxythiophene) as promising organic thermoelectric materials: A mini-review
Yue, R., & Xu, J. (2012) · Synthetic Metals · doi:10.1016/j.synthmet.2012.04.005 · Cited by 275
Koh, Y. K., Singer, S. L., Kim, W., Zide, J. M. O., Lu, H., Cahill, D. G., Majumdar, A., & Gossard, A. C. (2009) · Journal of Applied Physics · doi:10.1063/1.3078808 · Cited by 205
Cited by
Items 201–300 of 1,000
Fan, Z., Du, D., Yu, Z., Li, P., Xia, Y., & Ouyang, J. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b07234 · Cited by 147
Wang, C., Sun, K., Fu, J., Chen, R., Li, M., Zang, Z., Liu, X., Li, B., Gong, H., & Ouyang, J. (2018) · Advanced Sustainable Systems · doi:10.1002/adsu.201800085 · Cited by 146
Wang, L., Yao, Q., Bi, H., Huang, F., Wang, Q., & Chen, L. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta01541j · Cited by 145
Preparation and thermoelectric properties of multi-walled carbon nanotubes/polypyrrole composites
Wang, J., Cai, K., Shen, S., & Yin, J. (2014) · Synthetic Metals · doi:10.1016/j.synthmet.2014.06.003 · Cited by 143
Ren, X., Yang, F., Gao, X., Cheng, S., Zhang, X., Dong, H., & Hu, W. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201801003 · Cited by 143
A facile dedoping approach for effectively tuning thermoelectricity and acidity of PEDOT:PSS films
Tsai, T.-C., Chang, H.-C., Chen, C., Huang, Y., & Whang, W. (2014) · Organic Electronics · doi:10.1016/j.orgel.2013.12.023 · Cited by 137
Micro/nanostructured surfaces for self-powered and multifunctional electronic skins
Park, J., Lee, Y., Ha, M., Cho, S., & Ko, H. (2016) · Journal of Materials Chemistry B · doi:10.1039/c5tb02483h · Cited by 141
Effective treatment methods on PEDOT:PSS to enhance its thermoelectric performance
Zhu, Z., Liu, C., Jiang, F., Xu, J., & Liu, E. (2016) · Synthetic Metals · doi:10.1016/j.synthmet.2016.11.011 · Cited by 136
Petsagkourakis, I., Kim, N., Tybrandt, K., Zozoulenko, I. V., & Xavier Crispin, A. (2019) · Advanced Electronic Materials · doi:10.1002/aelm.201800918 · Cited by 136
Long, R., Li, B., Liu, Z., & Liu, W. (2016) · Journal of Membrane Science · doi:10.1016/j.memsci.2016.10.035 · Cited by 135
“However the extremely low ZT value at the low temperatures render the application [40].”
BackgroundE-Textile Technology Review–From Materials to Application
Komolafe, A. O., Zaghari, B., Torah, R. N., Weddell, A. S., Khanbareh, H., Tsikriteas, Z. M., Vousden, M. L., Wagih, M., Jurado, U. T., Shi, J., et al. (2021) · IEEE Access · doi:10.1109/access.2021.3094303 · Cited by 140
Wang, L., Yao, Q., Xiao, J., Zeng, K., Qu, S., Shi, W., Wang, Q., & Chen, L. (2016) · Chemistry - An Asian Journal · doi:10.1002/asia.201600212 · Cited by 133
Wang, L., Yao, Q., Shi, W., Qu, S., & Chen, L. (2016) · Materials Chemistry Frontiers · doi:10.1039/c6qm00188b · Cited by 133
Tuning thermoelectric performance by nanostructure evolution of a conducting polymer
Hu, X., Chen, G., Wang, X., & Wang, H. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta07381b · Cited by 132
Advances in organic thermoelectric materials and devices for smart applications
Zhao, Y., Liu, L., Zhang, F., Di, C., & Zhu, D. (2021) · SmartMat · doi:10.1002/smm2.1034 · Cited by 132
Experimental Studies on the Anisotropic Thermoelectric Properties of Conducting Polymer Films
Wei, Q., Mukaida, M., Kirihara, K., & Ishida, T. (2014) · ACS Macro Letters · doi:10.1021/mz500446z · Cited by 131
High-Performance Screen-Printed Thermoelectric Films on Fabrics
Shin, S., Kumar, R., Roh, J. W., Ko, D., Kim, H., Kim, S. I., Yin, L., Schlossberg, S. M., Cui, S., You, J., et al. (2017) · Scientific Reports · doi:10.1038/s41598-017-07654-2 · Cited by 133
Effect of Heteroatom and Doping on the Thermoelectric Properties of Poly(3‐alkylchalcogenophenes)
Gregory, S. A., Menon, A. K., Ye, S., Seferos, D. S., Reynolds, J. R., & Yee, S. K. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201802419 · Cited by 130
Tu, S., Tian, T., Oechsle, A. L., Yin, S., Jiang, X., Cao, W., Li, N., Reus, M. A., Reb, L. K., Hou, S., et al. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.132295 · Cited by 130
Layered Bi2Se3 Nanoplate/Polyvinylidene Fluoride Composite Based n-type Thermoelectric Fabrics
Dun, C., Hewitt, C. A., Huang, H., Xu, J., Montgomery, D. S., Nie, W., Jiang, Q., & Carroll, D. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b00514 · Cited by 129
Thermoelectric Properties of Polymeric Mixed Conductors
Ail, U., Jafari, M. J., Wang, H., Ederth, T., Magnus Berggren, A., & Xavier Crispin, A. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201601106 · Cited by 129
Phonon Collapse and Second-Order Phase Transition in Thermoelectric SnSe
Aseginolaza, U., Bianco, R., Monacelli, L., Paulatto, L., Calandra, M., Mauri, F., Bergara, A., & Errea, I. (2019) · Physical Review Letters · doi:10.1103/physrevlett.122.075901 · Cited by 143
Role of the Processing Solvent on the Electrical Conductivity of PEDOT:PSS
Dong, J., & Portale, G. (2020) · Advanced Materials Interfaces · doi:10.1002/admi.202000641 · Cited by 129
Lee, W., Kang, Y. H., Lee, J. Y., Jang, K., & Cho, S. Y. (2016) · RSC Advances · doi:10.1039/c6ra08599g · Cited by 127
Jung, I. H., Hong, C. T., Lee, U.-H., Kang, Y. H., Jang, K.-S., & Cho, S. Y. (2017) · Scientific Reports · doi:10.1038/srep44704 · Cited by 127
Approaching disorder-tolerant semiconducting polymers
Yan, X., Xiong, M., Deng, X., Liu, K., Li, J.-T., Wang, X., Zhang, S., Prine, N. L., Zhang, Z., Huang, W., et al. (2021) · Nature Communications · doi:10.1038/s41467-021-26043-y · Cited by 127
Survey of energy scavenging for wearable and implantable devices
Ghomian, T., & Mehraeen, S. (2019) · Energy · doi:10.1016/j.energy.2019.04.088 · Cited by 126
Xiong, J., Jiang, F., Zhou, W., Liu, C., & Xu, J. (2015) · RSC Advances · doi:10.1039/c5ra07820b · Cited by 126
What Currently Limits Charge Carrier Mobility in Crystals of Molecular Semiconductors?
Schweicher, G., Olivier, Y., Lemaur, V., & Geerts, Y. H. (2014) · Israel Journal of Chemistry · doi:10.1002/ijch.201400047 · Cited by 126
Role of Polymer Structure on the Conductivity of N‐Doped Polymers
Naab, B. D., Gu, X., Kurosawa, T., To, J. W. F., Salleo, A., & Bao, Z. (2016) · Advanced Electronic Materials · doi:10.1002/aelm.201600004 · Cited by 126
Polymer/carbon nanotube composite materials for flexible thermoelectric power generator
Song, H., Qiu, Y., Wang, Y., Cai, K., Li, D., Deng, Y., & He, J. (2017) · Composites Science and Technology · doi:10.1016/j.compscitech.2017.10.006 · Cited by 126
Thermoelectric Materials: Current Status and Future Challenges
Gilhooly‐Finn, P. A., Asker, C., Wan, K., Bilotti, E., Fenwick, O., & Nielsen, C. B. O. (2021) · Frontiers in Electronic Materials · doi:10.3389/femat.2021.677845 · Cited by 126
Roadmap on energy harvesting materials
Pecunia, V., Silva, S. R. P., Phillips, J., Artegiani, E., Romeo, A., Shim, H., Park, J., Kim, J. H., Yun, J. S., Welch, G. C., et al. (2023) · Journal of Physics Materials · doi:10.1088/2515-7639/acc550 · Cited by 147
Low‐Dimensional Conduction Mechanisms in Highly Conductive and Transparent Conjugated Polymers
Ugur, A., Katmis, F., Li, M., Wu, L., Zhu, Y., Varanasi, K. K., & Gleason, K. K. (2015) · Advanced Materials · doi:10.1002/adma.201502340 · Cited by 125
Kim, B., Na, J., Lim, H., Kim, Y., Kim, J., & Kim, E. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201807549 · Cited by 125
Efficient DMSO-Vapor Annealing for Enhancing Thermoelectric Performance of PEDOT:PSS-Based Aerogel
Wang, X., Liu, P., Jiang, Q., Zhou, W., Xu, J., Liu, J., Jia, Y., Duan, X., Liu, Y., Du, Y., et al. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b19168 · Cited by 125
Advances in thermoelectric devices for localized cooling
Sun, W. M., Liu, W., Liu, Q., & Chen, Z. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2022.138389 · Cited by 130
Crystalline Structure-Dependent Mechanical and Thermoelectric Performance in Ag2Se1‐xSx System
Liang, J. K., Qiu, P., Zhu, Y., Huang, H., Gao, Z., Zhang, Z., Shi, X., & Chen, L. (2020) · Research · doi:10.34133/2020/6591981 · Cited by 126
Yun, J., Choi, S., & Im, S. H. (2021) · Carbon Energy · doi:10.1002/cey2.121 · Cited by 123
Controlling the thermoelectric properties of polymers: application to PEDOT and polypyrrole
Culebras, M., Uriol, B., Gómez, C. M., & Cantarero, A. (2015) · Physical Chemistry Chemical Physics · doi:10.1039/c5cp01940k · Cited by 122
Zhou, J. P., Mulle, M., Zhang, Y., Xu, X., Li, E. Q., Han, F., Thoroddsen, S. T., & Gilles Lubineau, A. (2016) · Journal of Materials Chemistry C · doi:10.1039/c5tc03380b · Cited by 122
Zhang, S., Fan, Z., Wang, X., Zhang, Z., & Ouyang, J. (2018) · Journal of Materials Chemistry A · doi:10.1039/c7ta11148g · Cited by 122
Progress in micro/nano sensors and nanoenergy for future AIoT-based smart home applications
Haroun, A., Le, X., Gao, S., Dong, B., He, T., Zhang, Z., Wen, F., Xu, S., & Lee, C. (2021) · Nano Express · doi:10.1088/2632-959x/abf3d4 · Cited by 131
Hong, C. T., Lee, W., Kang, Y. H., Yoo, Y., Ryu, J., Cho, S. Y., & Jang, K. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta02443a · Cited by 121
Flexible thermoelectric fabrics based on self-assembled tellurium nanorods with a large power factor
Dun, C., Hewitt, C. A., Huang, H., Montgomery, D. S., Xu, J., & Carroll, D. (2015) · Physical Chemistry Chemical Physics · doi:10.1039/c4cp05390g · Cited by 121
High-performance hybrid organic thermoelectric SWNTs/PEDOT:PSS thin-films for energy harvesting
Jiang, Q., Lan, X., Liu, C., Shi, H., Zhu, Z., Zhao, F. Q., Xu, J., & Jiang, F. (2018) · Materials Chemistry Frontiers · doi:10.1039/c7qm00515f · Cited by 121
Zaia, E. W., Gordon, M. P., Yuan, P., & Urban, J. J. (2019) · Advanced Electronic Materials · doi:10.1002/aelm.201800823 · Cited by 122
Conformal organic–inorganic semiconductor composites for flexible thermoelectrics
Xu, Q., Qu, S., Chen, M., Qiu, P., Yao, Q., Zhu, C., Wei, T., He, J. P., Shi, X., & Chen, L. (2020) · Energy & Environmental Science · doi:10.1039/c9ee03776d · Cited by 121
Improved power factor of polyaniline nanocomposites with exfoliated graphene nanoplatelets (GNPs)
Mayor, B. A., Alda, I., Díaz-Chao, P., Kawakami, H., Almarza, A., Amantia, D., Gutiérrez–Tauste, D., Aubouy, L., & Martín‐González, M. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta12105d · Cited by 119
Ghosh, S., Nitin, B., Remanan, S., Bhattacharjee, Y., Ghorai, A., Dey, T., Das, T. K., & Das, N. C. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c02566 · Cited by 120
Deng, W., Deng, L. P., Li, Z., Zhang, Y., & Chen, G. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c01059 · Cited by 120
Flexible thermoelectric foil for wearable energy harvesting
Wan, C., Tian, R., Azizi, A. B., Huang, Y., Wei, Q., Sasai, R., Soontornchaiyakul, W., Ishida, T., & Koumoto, K. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.09.011 · Cited by 119
Jin, Q., Shi, W.-B., Zhao, Y., Qiao, J., Qiu, J., Sun, C., Lei, H. C., Tai, K., & Jiang, X. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b16356 · Cited by 119
Hasan, M. N., Nafea, M., Nayan, N., & Mohamed Ali, M. S. (2022) · Advanced Materials Technologies · doi:10.1002/admt.202101203 · Cited by 112
Mechanical properties of thermoelectric generators
Bao, X., Hou, S., Wu, Z., Wang, X., Yin, L., Liu, Y., He, H., Duan, S., Wang, B., Mao, J., et al. (2023) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2022.10.081 · Cited by 119
Printed thermoelectric materials and devices: Fabrication techniques, advantages, and challenges
Orrill, M., & LeBlanc, S. (2016) · Journal of Applied Polymer Science · doi:10.1002/app.44256 · Cited by 122
Cho, C., Culebras, M., Wallace, K. L., Song, Y., Holder, K. M., Hsu, J., Yu, C., & Grunlan, J. C. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.08.063 · Cited by 118
Preparation and thermoelectric properties of PEDOT:PSS coated Te nanorod/PEDOT:PSS composite films
Meng, Q., Jiang, Q., Cai, K., & Chen, L. (2018) · Organic Electronics · doi:10.1016/j.orgel.2018.10.010 · Cited by 118
Recent Progress in Organic Thermoelectric Materials and Devices
Lee, S., Kim, S., Pathak, A., Tripathi, A., Qiao, T., Lee, Y., Lee, H., & Woo, H. Y. (2020) · Macromolecular Research · doi:10.1007/s13233-020-8116-y · Cited by 118
Yi, C., Wilhite, A., Zhang, L., Hu, R., Chuang, S. S. C., Zheng, J., & Gong, X. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b01960 · Cited by 117
Flexible thermoelectric power generation system based on rigid inorganic bulk materials
Eom, Y., Wijethunge, D., Park, H., Park, S. H., & Kim, W. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.08.231 · Cited by 121
Fully Printed Organic–Inorganic Nanocomposites for Flexible Thermoelectric Applications
Ou, C., Sangle, A. L., Datta, A., Jing, Q., Busolo, T., Chalklen, T., Narayan, V., & Kar‐Narayan, S. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b01456 · Cited by 117
“The thermoelectric properties of these samples were found to be far inferior to the printed nanocomposites because of the relatively poor connectivity between the nanoparticles in the absence of PEDOT:PSS.”
InfluentialExploring Thermoelectric Materials from High Mobility Organic Semiconductors
Zhang, F., & Di, C. (2020) · Chemistry of Materials · doi:10.1021/acs.chemmater.0c00229 · Cited by 117
Thermoelectric properties of PEDOT nanowire/PEDOT hybrids
Zhang, K., Qiu, J., & Wang, S. (2016) · Nanoscale · doi:10.1039/c5nr08421k · Cited by 116
Self-citationNovel solution-processable, dedoped semiconductors for application in thermoelectric devices
Lee, S. H., Park, H., Son, W., Choi, H. H., & Kim, J. H. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta01839g · Cited by 114
The optimization of thermoelectric properties in a PEDOT:PSS thin film through post-treatment
Liu, S., Deng, H., Zhao, Y. F., Ren, S., & Fu, Q. (2014) · RSC Advances · doi:10.1039/c4ra09147g · Cited by 114
Challenges and opportunities in low-dimensional thermoelectric nanomaterials
Dong, J., Suwardi, A., Tan, X. Y., Jia, N., Sağlık, K., Ji, R., Wang, X., Zhu, Q., Xu, J., & Yan, Q. (2023) · Materials Today · doi:10.1016/j.mattod.2023.04.021 · Cited by 114
Dauzon, E., Mansour, A. E., Niazi, M. R., Munir, R., Smilgies, D., Sallenave, X., Plesse, C., Goubard, F., & Amassian, A. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b00934 · Cited by 114
Zhang, Q., Sun, Y., Xu, W., & Zhu, D. (2014) · Macromolecules · doi:10.1021/ma4020406 · Cited by 113
Lim, E., Glaudell, A. M., Miller, R., & Chabinyc, M. L. (2019) · Advanced Electronic Materials · doi:10.1002/aelm.201800915 · Cited by 111
High-Power All-Carbon Fully Printed and Wearable SWCNT-Based Organic Thermoelectric Generator
Mytafides, C. K., Tzounis, L., Karalis, G., Formánek, P., & Paipetis, A. S. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c00414 · Cited by 110
Polymer-based thermoelectric materials: A review of power factor improving strategies
Li, J., Huckleby, A. B., & Zhang, M. (2021) · Journal of Materiomics · doi:10.1016/j.jmat.2021.03.013 · Cited by 110
Zhang, Z., Chen, G., Wang, H., & Li, X. (2014) · Chemistry - An Asian Journal · doi:10.1002/asia.201403100 · Cited by 108
Scalable-produced 3D elastic thermoelectric network for body heat harvesting
Liu, Y. J., Wang, X., Hou, S., Wu, Z., Wang, J., Mao, J., Zhang, Q., Liu, Z., & Cao, F. (2023) · Nature Communications · doi:10.1038/s41467-023-38852-4 · Cited by 117
A facile chemical reduction approach for effectively tuning thermoelectric properties of PEDOT films
Wang, J., Cai, K., & Shen, S. (2014) · Organic Electronics · doi:10.1016/j.orgel.2014.12.007 · Cited by 107
Lindorf, M., Mazzio, K. A., Pflaum, J., Nielsch, K., Brütting, W., & Albrecht, M. (2020) · Journal of Materials Chemistry A · doi:10.1039/c9ta11717b · Cited by 107
Preparation of polypyrrole/graphene nanosheets composites with enhanced thermoelectric properties
Wang, L., Liu, F., Jin, C. Y., Zhang, T., & Yin, Q. (2014) · RSC Advances · doi:10.1039/c4ra07774a · Cited by 107
Exploring Peltier effect in organic thermoelectric films
Jin, W., Liu, L., Yang, T., Shen, H., Zhu, J. Y., Xu, W., Li, S., Li, Q., Chi, L., Di, C., et al. (2018) · Nature Communications · doi:10.1038/s41467-018-05999-4 · Cited by 106
Abol-Fotouh, D., Dörling, B., Zapata‐Arteaga, O., Rodríguez‐Martínez, X., Gómez, A., Reparaz, J. S., Laromaine, A., Roig, A., & Campoy‐Quiles, M. (2019) · Energy & Environmental Science · doi:10.1039/c8ee03112f · Cited by 106
Sanad, M. F., Shalan, A. E., Abdellatif, S. O., Serea, E. S. A., Adly, M. S., & Ahsan, M. A. (2020) · Topics in Current Chemistry · doi:10.1007/s41061-020-00310-w · Cited by 108
Structure–thermopower relationships in molecular thermoelectrics
Park, S., Kang, H., & Yoon, H. J. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta03358k · Cited by 105
One-step post-treatment boosts thermoelectric properties of PEDOT:PSS flexible thin films
Liu, X., Shi, X., Zhang, L., Liu, W., Yang, Y., & Chen, Z. (2022) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2022.05.047 · Cited by 105
Studies on mechanical properties of thermoelectric materials by nanoindentation
He, R., Gahlawat, S., Guo, C. F., Chen, S., Dahal, T., Zhang, H., Liu, W., Zhang, Q., Chere, E. K., White, K. W., et al. (2015) · physica status solidi (a) · doi:10.1002/pssa.201532045 · Cited by 105
Petsagkourakis, I., Pavlopoulou, E., Cloutet, É., Chen, Y. F., Liu, X., Fahlman, M., Magnus Berggren, A., Xavier Crispin, A., Dilhaire, S., Fleury, G., et al. (2017) · Organic Electronics · doi:10.1016/j.orgel.2017.11.018 · Cited by 105
Soft Organic Thermoelectric Materials: Principles, Current State of the Art and Applications
Zhang, Y., Wang, W., Zhang, F., Dai, K., Li, C., Fan, Y., Chen, G., & Zheng, Q. (2021) · Small · doi:10.1002/smll.202104922 · Cited by 104
Modulated Thermoelectric Properties of Organic Semiconductors Using Field‐Effect Transistors
Zhang, F., Zang, Y., Huang, D., Di, C., Gao, X., Sirringhaus, H., & Zhu, D. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201404397 · Cited by 103
Photoinduced p‐ to n‐type Switching in Thermoelectric Polymer‐Carbon Nanotube Composites
Dörling, B., Ryan, J. D., Craddock, J. D., Sorrentino, A., Basaty, A. B. E., Gómez, A., Garriga, M., Pereiro, E., Anthony, J. E., Weisenberger, M. C., et al. (2016) · Advanced Materials · doi:10.1002/adma.201505521 · Cited by 107
Qiu, L., Liu, J., Alessandri, R., Qiu, X., Koopmans, M., Havenith, R. W. A., Marrink, . J., Chiechi, R. C., Koster, L. J. A., & Hummelen, J. C. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta06609k · Cited by 103
Shi, W. Y., Chen, J., Xi, J., Wang, D., & Shuai, Z. (2014) · Chemistry of Materials · doi:10.1021/cm500429w · Cited by 103
Zhang, T., Li, K., Li, C. C., Ma, S., Hng, H. H., & Wei, L. (2017) · Advanced Electronic Materials · doi:10.1002/aelm.201600554 · Cited by 103
Bi 0.5 Sb 1.5 Te 3 -based films for flexible thermoelectric devices
Shang, H., Dun, C., Deng, Y., Li, T., Gao, Z., Xiao, L., Gu, H., Singh, D. J., Ren, Z., & Ding, F. (2020) · Journal of Materials Chemistry A · doi:10.1039/c9ta13152c · Cited by 103
Preparation and thermoelectric properties of reduced graphene oxide/PEDOT:PSS composite films
Li, F., Cai, K., Shen, S., & Chen, S. (2014) · Synthetic Metals · doi:10.1016/j.synthmet.2014.08.014 · Cited by 101
Duong, D. T., Phan, H., Hanifi, D. A., Jo, P. S., Nguyen, T., & Salleo, A. (2014) · Advanced Materials · doi:10.1002/adma.201402015 · Cited by 101
Jiao, F., Naderi, A., Zhao, D., Schlueter, J., Shahi, M., Sundström, J., Granberg, H., Edberg, J., Ail, U., Brill, J. W., et al. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta03196c · Cited by 101
Carbon Nanotube-Based Organic Thermoelectric Materials for Energy Harvesting
Wang, X., Wang, H., & Liu, B. (2018) · Polymers · doi:10.3390/polym10111196 · Cited by 101
Li, H., DeCoster, M. E., Ireland, R. M., Song, J. J., Hopkins, P. E., & Katz, H. E. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b05300 · Cited by 100
Thermoelectric Properties of Carbon Nanotubes
Hung, N. T., Nugraha, A. R. T., & Saito, R. (2019) · Energies · doi:10.3390/en12234561 · Cited by 100
Metal Halide Perovskites as Emerging Thermoelectric Materials
Hu, S., Ren, Z., Djurišić, A. B., & Rogach, A. L. (2021) · ACS Energy Letters · doi:10.1021/acsenergylett.1c02015 · Cited by 107
Lee, M., Kang, Y. H., Kim, J., Lee, Y. K., & Cho, S. Y. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201900914 · Cited by 99
Hokazono, M., Anno, H., & Toshima, N. (2014) · Journal of Electronic Materials · doi:10.1007/s11664-014-3003-y · Cited by 98
“…case of the organic-based PEDOT:PSS material, its stability in air and thermal stability with respect to electrical conductivity were reported by Kim et al.13 However, there are few systematic studies on the thermal stability with respect to the thermoelectric properties and durability of…”
Background
Metadata
- Authors
- Kim, G.-H., Shao, L., Zhang, K., & Pipe, K. P.
- Affiliations
- University of Michigan (US)
- Corresponding author
- Pipe, K. P.
- ORCID
- Venue
- Nature Materials
- Published
- 2013-05-05
- Volume
- 12
- Issue
- 8
- Pages
- 719-723
- ISSN
- 1476-1122 (ISSN-L)
- 1476-4660
- OpenAlex
- W2001566902
- Cited by
- 1,688
- References
- 16
- Citations by year
- 2026: 65 · 2025: 90 · 2024: 106 · 2023: 115 · 2022: 120 · 2021: 187 · 2020: 172 · 2019: 178 · 2018: 160 · 2017: 147 · 2016: 155 · 2015: 113 · 2014: 69 · 2013: 11
- FWCI
- 52.38
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.springer.com/tdm (tdm)
- www.springer.com/tdm (vor)
- Locations
- Nature Materials (publishedVersion)
- PubMed (publishedVersion)
- Scholarworks@UNIST (Ulsan National Institute of Science and Technology) (submittedVersion)
- Funders
- U.S. Department of Energy (DESC0000957)
- Basic Energy Sciences
- Energy Frontier Research Centers
- Topics
- Physical Sciences › Materials Science › Materials Chemistry › Advanced Thermoelectric Materials and Devices
- Physical Sciences › Materials Science › Materials Chemistry › Thermal properties of materials
- Physical Sciences › Materials Science › Polymers and Plastics › Conducting polymers and applications
- Keywords
- organic thermoelectrics, organic semiconductors, dopant engineering, figure of merit ZT, PEDOT:PSS, PEDOT, Seebeck coefficient, electrical conductivity, carrier concentration, conducting polymers, nanostructured materials
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.