The DOI matches its Crossref record; 16 of the 16 references it cites were found in a registry or an index.
Engineered doping of organic semiconductors for enhanced thermoelectric efficiency
Abstract
Significant improvements to the thermoelectric figure of merit ZT have emerged in recent years, primarily due to the engineering of material composition and nanostructure in inorganic semiconductors (ISCs). However, many present high-ZT materials are based on low-abundance elements that pose challenges for scale-up, as they entail high material costs in addition to brittleness and difficulty in large-area deposition. Here we demonstrate a strategy to improve ZT in conductive polymers and other organic semiconductors (OSCs) for which the base elements are earth-abundant. By minimizing total dopant volume, we show that all three parameters constituting ZT vary in a manner so that ZT increases; this stands in sharp contrast to ISCs, for which these parameters have trade-offs. Reducing dopant volume is found to be as important as optimizing carrier concentration when maximizing ZT in OSCs. Implementing this strategy with the dopant poly(styrenesulphonate) in poly(3,4-ethylenedioxythiophene), we achieve ZT = 0.42 at room temperature.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Various soft conductive materials such as thin metal,[106] conductive polymers,[508] nanomaterials,[509] etc. can be thermally actuated in the form of resistors.”
From Flexible Electronics and Devices as Human–Machine Interfaces for Medical Robotics (2022) · cites this paper as [508]
Citations
Cites
Cooling, Heating, Generating Power, and Recovering Waste Heat with Thermoelectric Systems
Bell, L. E. (2008) · Science · doi:10.1126/science.1158899 · Cited by 6,082
Bubnova, O., Khan, Z. U., Malti, A., Braun, S., Fahlman, M., Berggren, M., & Crispin, X. (2011) · Nature Materials · doi:10.1038/nmat3012 · Cited by 1,769
Kim, Y. H., Sachse, C., Machala, M. L., May, C., Müller‐Meskamp, L., & Leo, K. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201002290 · Cited by 1,458
Xia, Y., Sun, K., & Ouyang, J. (2012) · Advanced Materials · doi:10.1002/adma.201104795 · Cited by 1,124
PEDOT: Principles and Applications of an Intrinsically Conductive Polymer
Elschner, A., Kirchmeyer, S., Lovenich, W., Merker, U., & Reuter, K. (2010) · CRC Press eBooks · doi:10.1201/b10318 · Cited by 758
Microscopic Understanding of the Anisotropic Conductivity of PEDOT:PSS Thin Films
Nardes, A. M., Kemerink, M., Janssen, R. A. J., Bastiaansen, J. A. M., Kiggen, N. M. M., Langeveld, B. M. W., van Breemen, A. J. J. M., & de Kok, M. M. (2007) · Advanced Materials · doi:10.1002/adma.200602575 · Cited by 539
Zhang, B., Sun, J., Katz, H. E., Fang, F., & Opila, R. L. (2010) · ACS Applied Materials & Interfaces · doi:10.1021/am100654p · Cited by 480
Microscopical Investigations of PEDOT:PSS Thin Films
Lang, U., Müller, E., Naujoks, N., & Dual, J. (2009) · Advanced Functional Materials · doi:10.1002/adfm.200801258 · Cited by 457
Poly(3,4-ethylenedioxythiophene) as promising organic thermoelectric materials: A mini-review
Yue, R., & Xu, J. (2012) · Synthetic Metals · doi:10.1016/j.synthmet.2012.04.005 · Cited by 275
Koh, Y. K., Singer, S. L., Kim, W., Zide, J. M. O., Lu, H., Cahill, D. G., Majumdar, A., & Gossard, A. C. (2009) · Journal of Applied Physics · doi:10.1063/1.3078808 · Cited by 205
Cited by
Items 301–400 of 1,000
Controlling Electrostatic Interaction in PEDOT:PSS to Overcome Thermoelectric Tradeoff Relation
Ju, D., Kim, D., Yook, H., Han, J. W., & Cho, K. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201905590 · Cited by 97
Wearable and Biodegradable Sensors for Clinical and Environmental Applications
Baldo, T. A., de Lima, L. F., Mendes, L. F., de Araujo, W. R., Paixão, T. R. L. C., & Coltro, W. K. T. (2020) · ACS Applied Electronic Materials · doi:10.1021/acsaelm.0c00735 · Cited by 97
Kumar, S. R. S., Kurra, N., & Alshareef, H. N. (2015) · Journal of Materials Chemistry C · doi:10.1039/c5tc03145a · Cited by 96
Gao, J., Miao, L., Liu, C., Wang, X., Peng, Y., Wei, X., Zhou, J., Chen, Y., Hashimoto, R., Asaka, T., et al. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta07601k · Cited by 96
Lignin Doped Carbon Nanotube Yarns for Improved Thermoelectric Efficiency
Culebras, M., Ren, G., O'Connell, S., Vilatela, J. J., & Collins, M. N. (2020) · Advanced Sustainable Systems · doi:10.1002/adsu.202000147 · Cited by 96
A Free‐Standing High‐Output Power Density Thermoelectric Device Based on Structure‐Ordered PEDOT:PSS
Li, Z., Sun, H., Hsiao, C., Yao, Y., Xiao, Y., Shahi, M., Jin, Y., Cruce, A. A., Liu, X., Jiang, Y., et al. (2018) · Advanced Electronic Materials · doi:10.1002/aelm.201700496 · Cited by 96
Petsagkourakis, I., Pavlopoulou, E., Portale, G., Kuropatwa, B. A., Dilhaire, S., Fleury, G., & Hadziioannou, G. (2016) · Scientific Reports · doi:10.1038/srep30501 · Cited by 95
Enhanced Molecular Packing of a Conjugated Polymer with High Organic Thermoelectric Power Factor
Ma, W., Shi, K., Wu, Y., Lu, Z., Liu, H., Wang, J., & Pei, J. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b06899 · Cited by 95
Li, Q., Deng, M., Zhang, S., Zhao, D., Jiang, Q., Guo, C. F., Zhou, Q., & Liu, W. (2019) · Journal of Materials Chemistry C · doi:10.1039/c9tc00310j · Cited by 95
Wang, J., Cai, K., & Shen, S. (2014) · Organic Electronics · doi:10.1016/j.orgel.2014.09.012 · Cited by 95
Huang, D., Wang, C., Zou, Y., Shen, X., Zang, Y., Shen, H., Gao, X., Yi, Y., Xu, W., Di, C., et al. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201604478 · Cited by 94
Stretchable Thermoelectric Generators Metallized with Liquid Alloy
Jeong, S. H., Cruz, F. J., Chen, S., Gravier, L., Liu, J., Wu, Z., Hjort, K., Zhang, S., & Zhang, Z.-B. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b04752 · Cited by 94
Polymeric thermoelectric PEDOT: PSS & composites: Synthesis, progress, and applications
Panigrahy, S., & Kandasubramanian, B. (2020) · European Polymer Journal · doi:10.1016/j.eurpolymj.2020.109726 · Cited by 95
Wet-spun PEDOT:PSS/CNT composite fibers for wearable thermoelectric energy harvesting
Xu, C., Yang, S., Li, P., Wang, H., Li, H., & Liu, Z. (2022) · Composites Communications · doi:10.1016/j.coco.2022.101179 · Cited by 94
Chabinyc, M. L. (2014) · Nature Materials · doi:10.1038/nmat3859 · Cited by 93
High-performance PEDOT:PSS-based thermoelectric composites
Zhou, H. W., Chua, M. H., Zhu, Q., & Xu, J. (2021) · Composites Communications · doi:10.1016/j.coco.2021.100877 · Cited by 93
Song, H., Cai, K., Wang, J., & Shen, S. (2015) · Synthetic Metals · doi:10.1016/j.synthmet.2015.11.013 · Cited by 93
Lu, Y., Qiu, Y., Jiang, Q., Cai, K., Du, Y., Song, H., Gao, M., Huang, C., He, J., & Hu, D. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b15252 · Cited by 92
Mallick, M. M., Rösch, A. G., Franke, L., Ahmed, S., Gall, A., Geßwein, H., Aghassi‐Hagmann, J., & Lemmer, U. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c01676 · Cited by 92
Yue, T., Zhao, Y., Ni, J., Meng, S., & Dai, Z. (2023) · npj Computational Materials · doi:10.1038/s41524-023-00970-4 · Cited by 92
Enhanced Thermoelectric Performance of Bar-Coated SWCNT/P3HT Thin Films
Lee, W., Hong, C. T., Kwon, O. H., Yoo, Y., Kang, Y. H., Lee, J. Y., Cho, S. Y., & Jang, K. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b00626 · Cited by 92
Electrostatic Effect on the Solution Structure and Dynamics of PEDOT:PSS
Leaf, M. A., & Muthukumar, M. (2016) · Macromolecules · doi:10.1021/acs.macromol.6b00740 · Cited by 92
Advanced platform for the in-plane ZT measurement of thin films
Linseis, V., Völklein, F., Reith, H., Nielsch, K., & Woias, P. (2018) · Review of Scientific Instruments · doi:10.1063/1.5005807 · Cited by 91
Zheng, Y., Zeng, H., Zhu, Q., & Xu, J. (2018) · Journal of Materials Chemistry C · doi:10.1039/c8tc01900b · Cited by 91
Advances in thermal conductivity for energy applications: a review
Zheng, Q., Hao, M., Miao, R., Schaadt, J. R. H., & Dames, C. (2020) · Progress in Energy · doi:10.1088/2516-1083/abd082 · Cited by 102
“As a successful example in polymers, Kim et al [510] engineered PEDOT:PSS to decrease k from 0.30 W m−1 K−1 to 0.22 W m−1 K−1 and achieved ZT= 0.42 at room temperature.”
MethodInfluentialLi, H., Liu, Y., Li, P., Liu, S., Du, F., & He, C. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c20931 · Cited by 91
Du, Y., Cai, K., Shen, S. Z., Donelsonand, R., Xu, J. Y., Wang, H., & Lin, T. (2017) · RSC Advances · doi:10.1039/c7ra08663f · Cited by 92
Yuan, D., Huang, D., Zhang, C., Zou, Y., Di, C., Zhu, X., & Zhu, D. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b07282 · Cited by 90
A Flexible Self‐Powered Sensing Element with Integrated Organic Thermoelectric Generator
Zheng, C., Xiang, L., Jin, W., Shen, H., Zhao, W., Zhang, F., Di, C., & Zhu, D. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201900247 · Cited by 90
Zhang, L., Xia, B., Shi, X., Liu, W., Yang, Y., Hou, X., Ye, X., Suo, G., & Chen, Z. (2022) · Carbon · doi:10.1016/j.carbon.2022.05.043 · Cited by 90
Thermoelectric power enhancement of PEDOT:PSS in high-humidity conditions
Wei, Q., Mukaida, M., Kirihara, K., Naitoh, Y., & Ishida, T. (2014) · Applied Physics Express · doi:10.7567/apex.7.031601 · Cited by 89
Strong anisotropy in thermoelectric properties of CNT/PANI composites
Chen, J., Wang, L., Gui, X., Lin, Z., Ke, X., Hao, F., Li, Y., Jiang, Y., Wu, Y., Shi, X., et al. (2016) · Carbon · doi:10.1016/j.carbon.2016.11.074 · Cited by 89
Kim, J.-Y., Mo, J.-H., Kang, Y. H., Cho, S. Y., & Jang, K. (2018) · Nanoscale · doi:10.1039/c8nr06415f · Cited by 89
Energy Harvesters for Wearable Electronics and Biomedical Devices
Hasan, M. N., Sahlan, S., Osman, K., & Ali, M. S. M. (2021) · Advanced Materials Technologies · doi:10.1002/admt.202000771 · Cited by 96
A Review on Organic Polymer-Based Thermoelectric Materials
Peng, S., Wang, D., Lu, J.-D., He, M., Xu, C., Li, Y., & Zhu, S. (2016) · Journal of Polymers and the Environment · doi:10.1007/s10924-016-0895-z · Cited by 91
Polymer-Free Carbon Nanotube Thermoelectrics with Improved Charge Carrier Transport and Power Factor
Norton‐Baker, B., Ihly, R., Gould, I. E., Avery, A. D., Owczarczyk, Z. R., Ferguson, A. J., & Blackburn, J. L. (2016) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00417 · Cited by 88
Xu, S., Hong, M., Shi, X., Li, M., Sun, Q., Chen, Q., Dargusch, M. S., Zou, J., & Chen, Z. (2020) · Energy & Environmental Science · doi:10.1039/d0ee01895c · Cited by 88
New promising bulk thermoelectrics: intermetallics, pnictides and chalcogenides
Gonçalves, A. P., & Godart, C. (2014) · The European Physical Journal B · doi:10.1140/epjb/e2014-40989-3 · Cited by 87
Wang, H., Chu, W., & Chen, G. (2019) · Advanced Electronic Materials · doi:10.1002/aelm.201900167 · Cited by 87
A high performance all-organic thermoelectric fiber generator towards promising wearable electron
Lan, X., Wang, T., Liu, C., Liu, P., Xu, J., Liu, X., Du, Y., & Jiang, F. (2019) · Composites Science and Technology · doi:10.1016/j.compscitech.2019.107767 · Cited by 87
Emerging research directions for n-type conjugated polymers
Jia, H., & Lei, T. (2019) · Journal of Materials Chemistry C · doi:10.1039/c9tc02632k · Cited by 86
3D extruded composite thermoelectric threads for flexible energy harvesting
Peng, J., Witting, I. T., Geisendorfer, N. R., Wang, M., Chang, M., Jakus, A. E., Kenel, C., Yan, X. X., Shah, R. N., Snyder, G. J., et al. (2019) · Nature Communications · doi:10.1038/s41467-019-13461-2 · Cited by 86
Cheng, H., & Ouyang, J. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202001633 · Cited by 86
Liang, J., Cui, R., Zhang, X., Koumoto, K., & Wan, C. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202208813 · Cited by 86
Carbon nanotube bundles/polystyrene composites as high-performance flexible thermoelectric materials
Suemori, K., Watanabe, Y., & Hoshino, S. (2015) · Applied Physics Letters · doi:10.1063/1.4915622 · Cited by 86
Shi, W. Y., Shuai, Z., & Wang, D. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201702847 · Cited by 86
Hsu, J., Choi, W., Yang, G. Q., & Yu, C. (2017) · Organic Electronics · doi:10.1016/j.orgel.2017.03.007 · Cited by 85
Progress on PEDOT:PSS/Nanocrystal Thermoelectric Composites
Song, H., Meng, Q., Lu, Y., & Cai, K. (2019) · Advanced Electronic Materials · doi:10.1002/aelm.201800822 · Cited by 86
Modulation of the morphotropic phase boundary for high-performance ductile thermoelectric materials
Liang, J. K., Liu, J., Qiu, P., Chen, M., Zhou, Z., Gao, Z., Zhao, K., Chen, L., & Shi, X. (2023) · Nature Communications · doi:10.1038/s41467-023-44318-4 · Cited by 84
Guan, X., Cheng, H., & Ouyang, J. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta08387h · Cited by 84
Zeng, X., Yan, C., Ren, L., Zhang, T., Zhou, F., Liang, X., Wang, N., Sun, R., Xu, J., & Wong, C. (2018) · Advanced Electronic Materials · doi:10.1002/aelm.201800612 · Cited by 83
Roll-to-roll printing of flexible thin-film organic thermoelectric devices
Zhang, Z., Qiu, J., & Wang, S. (2016) · Manufacturing Letters · doi:10.1016/j.mfglet.2016.04.002 · Cited by 82
Chen, S., Kühne, P., Stanishev, V., Knight, S., Brooke, R., Petsagkourakis, I., Xavier Crispin, A., Schubert, M. M., Darakchieva, V., & Jonsson, M. P. (2019) · Journal of Materials Chemistry C · doi:10.1039/c8tc06302h · Cited by 82
Sarabia‐Riquelme, R., Shahi, M., Brill, J. W., & Weisenberger, M. C. (2019) · ACS Applied Polymer Materials · doi:10.1021/acsapm.9b00425 · Cited by 82
Lv, S., Qian, Z., Hu, D., Li, X., & He, W. (2020) · Energies · doi:10.3390/en13123142 · Cited by 82
Xue, Y., Chen, S., Yu, J., Bunes, B. R., Xue, Z., Xu, J., Lu, B., & Zang, L. (2020) · Journal of Materials Chemistry C · doi:10.1039/d0tc02152k · Cited by 85
Zhou, W., Fan, Q., Zhang, Q., Li, K., Cai, L., Gu, X., Yang, F., Zhang, N., Xiao, Z., Chen, H., et al. (2016) · Small · doi:10.1002/smll.201600501 · Cited by 82
Wang, L., Dong, B., Ge, R., Jiang, F., & Xu, J. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b14916 · Cited by 82
Conjugated Polymer Blends for Organic Thermoelectrics
Zuo, G., Abdalla, H., & Kemerink, M. (2019) · Advanced Electronic Materials · doi:10.1002/aelm.201800821 · Cited by 81
Du, P., Zhang, Q., Wang, X., Luo, L., & Li, W. (2019) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2019.07.054 · Cited by 81
Ju, H., & Kim, J. (2016) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.03.137 · Cited by 81
Takimiya, K., & Nakano, M. (2017) · Bulletin of the Chemical Society of Japan · doi:10.1246/bcsj.20170298 · Cited by 80
Thermal Conductance in Cross-linked Polymers: Effects of Non-Bonding Interactions
Rashidi, V., Coyle, E. J., Sebeck, K., Kieffer, J., & Pipe, K. P. (2017) · The Journal of Physical Chemistry B · doi:10.1021/acs.jpcb.7b01377 · Cited by 86
Self-citationChen, X., Dai, W., Wu, T., Luo, W. D., Yang, J., Jiang, W., & Wang, L. (2018) · Coatings · doi:10.3390/coatings8070244 · Cited by 80
“In addition, the thermal conductivity along the cross-plane and in-plane direction have been measured and reported by the 3ω methods and time-domain thermoreflectance measurements (TDTR) [26,55,74].”
MethodThermoelectric materials and devices fabricated by additive manufacturing
Du, Y., Chen, J., Meng, Q., Dou, Y., Xu, J., & Shen, S. (2020) · Vacuum · doi:10.1016/j.vacuum.2020.109384 · Cited by 79
Towards Low Cost and Sustainable Thin Film Thermoelectric Devices Based on Quaternary Chalcogenides
Isotta, E., Andrade‐Arvizu, J., Syafiq, U., Jiménez‐Arguijo, A., Navarro-Güell, A., Guc, M., Saucedo, E., & Scardi, P. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202202157 · Cited by 79
Wettability of PEDOT:PSS films
Duc, C., Vlandas, A., Malliaras, G. G., & Senez, V. (2016) · Soft Matter · doi:10.1039/c6sm00599c · Cited by 79
Highly improved thermoelectric performances of PEDOT:PSS/SWCNT composites by solvent treatment
Zhang, L., Harima, Y., & Imae, I. (2017) · Organic Electronics · doi:10.1016/j.orgel.2017.09.030 · Cited by 79
Wang, L., Zhang, J., Guo, Y., Chen, X., Jin, X., Yang, Q., Zhang, K., Wang, S., & Qiu, Y. (2019) · Carbon · doi:10.1016/j.carbon.2019.03.088 · Cited by 78
Self-citationMallick, M. M., Rösch, A. G., Franke, L., Gall, A., Ahmad, S., Geßwein, H., Mazilkin, A. A., Kübel, C., & Lemmer, U. (2020) · Journal of Materials Chemistry A · doi:10.1039/d0ta05859a · Cited by 78
Sulfuric acid vapor treatment for enhancing the thermoelectric properties of PEDOT:PSS thin-films
Kim, J., Jang, J. G., Hong, J., Kim, S. H., & Kwak, J. (2016) · Journal of Materials Science Materials in Electronics · doi:10.1007/s10854-016-4538-x · Cited by 78
Recent Progress in Designing Thermoelectric Metal–Organic Frameworks
Fan, Y., Liu, Z., & Chen, G. (2021) · Small · doi:10.1002/smll.202100505 · Cited by 78
Recent progress of halide perovskites for thermoelectric application
Zhou, Y., Wang, J., Luo, D., Hu, D., Min, Y., & Xue, Q. (2022) · Nano Energy · doi:10.1016/j.nanoen.2022.106949 · Cited by 77
Liu, C., Li, Q., Wang, S., Liu, W., Fang, N. X., & Feng, S. (2021) · Nano Energy · doi:10.1016/j.nanoen.2021.106738 · Cited by 76
“2C shows the thermopower of best reported TECs and i-TEs relying on various working principles from top to bottom: thermogalvanic effect: ferric/ferrous (Fe2+/3+) aqueous electrolyte through graphene oxide/platinum (GO/Pt) cathode and PANI anode (GO/Pt | Fe2+/3+ | PANI) [29]; ferri/ferrocyanide (Fe(CN)6) aqueous elect…”
MethodShi, W., Yao, Q., Qu, S., Chen, H., Zhang, T., & Chen, L. (2017) · NPG Asia Materials · doi:10.1038/am.2017.107 · Cited by 76
Goo, G. W., Anoop, G., Unithrattil, S., Kim, W. S., Lee, H. J., Kim, H. B., Jung, M., Park, J., Ko, H. C., & Jo, J. Y. (2019) · Advanced Electronic Materials · doi:10.1002/aelm.201800786 · Cited by 76
Efficient and affordable thermomagnetic materials for harvesting low grade waste heat
Dzekan, D., Waske, A., Nielsch, K., & Fähler, S. (2021) · APL Materials · doi:10.1063/5.0033970 · Cited by 75
“e-Co-Si (Calorivac C®) is compared with two thermoelectric materials. Bi 2 Te 2.79 Se 0.21 [59] reaches the highest efficiency in vicinity of room temperature and the organic thermoelectric PEDOT:PSS [60] is cheaper and more sustainable. At low temperature differences thermomagnetic materials outperform thermoelectric…”
BackgroundInfluentialProcessing and doping of thick polymer active layers for flexible organic thermoelectric modules
Hwang, S., Potscavage, W. J., Nakamichi, R., & Adachi, C. (2016) · Organic Electronics · doi:10.1016/j.orgel.2016.01.007 · Cited by 75
Cho, W., Im, S., Kim, S., Kim, S., & Kim, J. H. (2016) · Polymers · doi:10.3390/polym8050189 · Cited by 74
“9 eV with PSS and PEDOT, respectively [5,25].”
BackgroundHigh performance of PEDOT:PSS/SiC-NWs hybrid thermoelectric thin film for energy harvesting
Wang, X., Meng, F., Wang, T., Li, C., Tang, H., Gao, Z., Li, S., Jiang, F., & Xu, J. (2017) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2017.11.013 · Cited by 74
Reduction of the Lattice Thermal Conductivity of Polymer Semiconductors by Molecular Doping
Zapata‐Arteaga, O., Perevedentsev, A., Marina, S., Martín, J., Reparaz, J. S., & Campoy‐Quiles, M. (2020) · ACS Energy Letters · doi:10.1021/acsenergylett.0c01410 · Cited by 74
Paulraj, I., Liang, T.-F., Yang, T.-S., Wang, C., Chen, J., Wang, Y., & Liu, C. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c13968 · Cited by 74
Vapor and heat dual-drive sustainable power for portable electronics in ambient environments
Bai, J., Hu, Y., Guang, T., Zhu, K., Wang, H., Cheng, H., Liu, F., & Qu, L. (2022) · Energy & Environmental Science · doi:10.1039/d2ee00846g · Cited by 74
Chen, C., Jacobs, I. E., Kang, K., Lin, Y., Jellett, C., Kang, B., Lee, S. B., Huang, Y., BaloochQarai, M., Ghosh, R., et al. (2023) · Advanced Energy Materials · doi:10.1002/aenm.202202797 · Cited by 74
Electrochemical Effects in Thermoelectric Polymers
Chang, W. B., Fang, H., Líu, J., Evans, C. M., Russ, B., Popere, B. C., Patel, S. N., Chabinyc, M. L., & Segalman, R. A. (2016) · ACS Macro Letters · doi:10.1021/acsmacrolett.6b00054 · Cited by 74
Urban, J. J., Menon, A. K., Tian, Z., Jain, A., & Hippalgaonkar, K. (2019) · Journal of Applied Physics · doi:10.1063/1.5092525 · Cited by 75
n‐Type Quinoidal Oligothiophene‐Based Semiconductors for Thin‐Film Transistors and Thermoelectrics
Zhang, C., & Zhu, X. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202000765 · Cited by 73
Recent Advances and Prospects of Small Molecular Organic Thermoelectric Materials
Zhou, D., Zhang, H., Zheng, H., Xu, Z., Xu, H., Guo, H., Li, P., Tong, Y., Hu, B., & Chen, L. (2022) · Small · doi:10.1002/smll.202200679 · Cited by 74
Ju, H., Kim, M., & Kim, J. (2015) · Chemical Engineering Journal · doi:10.1016/j.cej.2015.04.042 · Cited by 73
Correcting for contact geometry in Seebeck coefficient measurements of thin film devices
van Reenen, S., & Kemerink, M. (2014) · Organic Electronics · doi:10.1016/j.orgel.2014.06.018 · Cited by 73
Copper Sulfides: Earth‐Abundant and Low‐Cost Thermoelectric Materials
Mulla, R., & Rabinal, M. K. (2018) · Energy Technology · doi:10.1002/ente.201800850 · Cited by 73
Hu, X., Chen, G., & Wang, X. (2017) · Composites Science and Technology · doi:10.1016/j.compscitech.2017.03.018 · Cited by 72
Ink Processing for Thermoelectric Materials and Power‐Generating Devices
Jo, S., Choo, S., Kim, F., Heo, S. H., & Son, J. S. (2018) · Advanced Materials · doi:10.1002/adma.201804930 · Cited by 74
Emerging electronic applications of fullerene derivatives: an era beyond OPV
Liu, J., Qiu, L., & Shao, S. (2021) · Journal of Materials Chemistry C · doi:10.1039/d1tc04038c · Cited by 72
Kiyota, Y., Kadoya, T., Yamamoto, K., Iijima, K., Higashino, T., Kawamoto, T., Takimiya, K., & Mori, T. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b01213 · Cited by 72
Organic thermoelectric devices based on a stable n-type nanocomposite printed on paper
Ferhat, S., Domain, C., Vidal, J., Noël, D., Ratier, B., & Lucas, B. (2017) · Sustainable Energy & Fuels · doi:10.1039/c7se00313g · Cited by 71
Xiong, M., Yan, X., Li, J., Zhang, S., Cao, Z., Prine, N. L., Lu, Y. M., Wang, J., Gu, X., & Lei, T. (2021) · Angewandte Chemie International Edition · doi:10.1002/anie.202015216 · Cited by 71
Hossain, M. S., Li, T., Yu, Y., Yong, J., Bahk, J., & Skafidas, E. S. (2020) · RSC Advances · doi:10.1039/c9ra09801a · Cited by 70
Transparent flexible thin-film p–n junction thermoelectric module
Wang, X., Suwardi, A., Lim, S. L., Wei, F., & Xu, J. (2020) · npj Flexible Electronics · doi:10.1038/s41528-020-00082-9 · Cited by 70
Charge transport in doped conjugated polymers for organic thermoelectrics
Scheunemann, D., Järsvall, E., Liu, J., Beretta, D., Fabiano, S., Caironi, M., Kemerink, M., & Müller, C. (2022) · Chemical Physics Reviews · doi:10.1063/5.0080820 · Cited by 70
Metadata
- Authors
- Kim, G.-H., Shao, L., Zhang, K., & Pipe, K. P.
- Affiliations
- University of Michigan (US)
- Corresponding author
- Pipe, K. P.
- ORCID
- Venue
- Nature Materials
- Published
- 2013-05-05
- Volume
- 12
- Issue
- 8
- Pages
- 719-723
- ISSN
- 1476-1122 (ISSN-L)
- 1476-4660
- OpenAlex
- W2001566902
- Cited by
- 1,688
- References
- 16
- Citations by year
- 2026: 65 · 2025: 90 · 2024: 106 · 2023: 115 · 2022: 120 · 2021: 187 · 2020: 172 · 2019: 178 · 2018: 160 · 2017: 147 · 2016: 155 · 2015: 113 · 2014: 69 · 2013: 11
- FWCI
- 52.38
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.springer.com/tdm (tdm)
- www.springer.com/tdm (vor)
- Locations
- Nature Materials (publishedVersion)
- PubMed (publishedVersion)
- Scholarworks@UNIST (Ulsan National Institute of Science and Technology) (submittedVersion)
- Funders
- U.S. Department of Energy (DESC0000957)
- Basic Energy Sciences
- Energy Frontier Research Centers
- Topics
- Physical Sciences › Materials Science › Materials Chemistry › Advanced Thermoelectric Materials and Devices
- Physical Sciences › Materials Science › Materials Chemistry › Thermal properties of materials
- Physical Sciences › Materials Science › Polymers and Plastics › Conducting polymers and applications
- Keywords
- organic thermoelectrics, organic semiconductors, dopant engineering, figure of merit ZT, PEDOT:PSS, PEDOT, Seebeck coefficient, electrical conductivity, carrier concentration, conducting polymers, nanostructured materials
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.