The DOI matches its Crossref record; 39 of the 39 references it cites were found in a registry or an index.
Stable lithium electrodeposition in liquid and nanoporous solid electrolytes
Open accessAbstract
Rechargeable lithium, sodium and aluminium metal-based batteries are among the most versatile platforms for high-energy, cost-effective electrochemical energy storage. Non-uniform metal deposition and dendrite formation on the negative electrode during repeated cycles of charge and discharge are major hurdles to commercialization of energy-storage devices based on each of these chemistries. A long-held view is that unstable electrodeposition is a consequence of inherent characteristics of these metals and their inability to form uniform electrodeposits on surfaces with inevitable defects. We report on electrodeposition of lithium in simple liquid electrolytes and in nanoporous solids infused with liquid electrolytes. We find that simple liquid electrolytes reinforced with halogenated salt blends exhibit stable long-term cycling at room temperature, often with no signs of deposition instabilities over hundreds of cycles of charge and discharge and thousands of operating hours. We rationalize these observations with the help of surface energy data for the electrolyte/lithium interface and impedance analysis of the interface during different stages of cell operation. Our findings provide support for an important recent theoretical prediction that the surface mobility of lithium is significantly enhanced in the presence of lithium halide salts. Our results also show that a high electrolyte modulus is unnecessary for stable electrodeposition of lithium.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Handbook of X-Ray Photoelectron Spectroscopy
Moulder, J. F. (1995) · Medical Entomology and Zoology · Cited by 23,662
Issues and challenges facing rechargeable lithium batteries
Tarascon, J.-M., & Armand, M. (2001) · Nature · doi:10.1038/35104644 · Cited by 21,130
Armand, M., & Tarascon, J.-M. (2008) · Nature · doi:10.1038/451652a · Cited by 19,612
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
Nanostructured materials for advanced energy conversion and storage devices
Aricò, A. S., Bruce, P., Scrosati, B., Tarascon, J.-M., & van Schalkwijk, W. (2005) · Nature Materials · doi:10.1038/nmat1368 · Cited by 8,826
Nonaqueous Liquid Electrolytes for Lithium-Based Rechargeable Batteries
Xu, K. (2004) · Chemical Reviews · doi:10.1021/cr030203g · Cited by 7,437
Battery materials for ultrafast charging and discharging
Kang, B., & Ceder, G. (2009) · Nature · doi:10.1038/nature07853 · Cited by 3,480
Nanocomposite polymer electrolytes for lithium batteries
Croce, F., Appetecchi, G. B., Persi, L., & Scrosati, B. (1998) · Nature · doi:10.1038/28818 · Cited by 3,205
Prototype systems for rechargeable magnesium batteries
Aurbach, D., Lu, Z., Schechter, A., Gofer, Y., Gizbar, H., Turgeman, R., Cohen, Y., Moshkovich, M., & Levi, E. (2000) · Nature · doi:10.1038/35037553 · Cited by 2,355
Dendrite-Free Lithium Deposition via Self-Healing Electrostatic Shield Mechanism
Ding, F., Xu, W., Graff, G. L., Zhang, J., Sushko, M. L., Chen, X., Shao, Y., Engelhard, M. H., Nie, Z., Xiao, J., et al. (2013) · Journal of the American Chemical Society · doi:10.1021/ja312241y · Cited by 2,107
Cited by
Reviving the lithium metal anode for high-energy batteries
Lin, D., Liu, Y., & Cui, Y. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2017.16 · Cited by 6,763
Toward Safe Lithium Metal Anode in Rechargeable Batteries: A Review
Cheng, X.-B., Zhang, R., Zhao, C.-Z., & Zhang, Q. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00115 · Cited by 6,197
Promise and reality of post-lithium-ion batteries with high energy densities
Choi, J. W., & Aurbach, D. (2016) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.13 · Cited by 5,110
Designing high-energy lithium–sulfur batteries
Seh, Z. W., Sun, Y., Zhang, Q., & Cui, Y. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00410a · Cited by 2,573
High rate and stable cycling of lithium metal anode
Qian, J., Henderson, W. A., Xu, W., Bhattacharya, P., Engelhard, M., Borodin, O., & Zhang, J.-G. (2015) · Nature Communications · doi:10.1038/ncomms7362 · Cited by 2,561
Zhang, N., Cheng, F., Liu, Y., Zhao, Q., Lei, K., Chen, C., Liu, X., & Chen, J. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b05958 · Cited by 1,886
Lin, D., Liu, Y., Liang, Z., Lee, H.-W., Sun, J., Wang, H., Yan, K., Xie, J., & Cui, Y. (2016) · Nature Nanotechnology · doi:10.1038/nnano.2016.32 · Cited by 1,798
A Review of Solid Electrolyte Interphases on Lithium Metal Anode
Cheng, X., Zhang, R., Zhao, C., Wei, F., Zhang, J., & Zhang, Q. (2016) · Advanced Science · doi:10.1002/advs.201500213 · Cited by 1,786
Design principles for electrolytes and interfaces for stable lithium-metal batteries
Tikekar, M. D., Choudhury, S., Tu, Z., & Archer, L. A. (2016) · Nature Energy · doi:10.1038/nenergy.2016.114 · Cited by 1,765
Self-citationReview on High‐Loading and High‐Energy Lithium–Sulfur Batteries
Peng, H., Huang, J., Cheng, X., & Zhang, Q. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700260 · Cited by 1,746
Nanoscale Nucleation and Growth of Electrodeposited Lithium Metal
Pei, A., Zheng, G., Shi, F., Li, Y., & Cui, Y. (2017) · Nano Letters · doi:10.1021/acs.nanolett.6b04755 · Cited by 1,726
Fluoroethylene Carbonate Additives to Render Uniform Li Deposits in Lithium Metal Batteries
Zhang, X., Cheng, X., Chen, X., Yan, C., & Zhang, Q. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201605989 · Cited by 1,699
Advancing Lithium Metal Batteries
Liu, B., Zhang, J.-G., & Xu, W. (2018) · Joule · doi:10.1016/j.joule.2018.03.008 · Cited by 1,647
Nanostructured Metal Oxides and Sulfides for Lithium–Sulfur Batteries
Liu, X., Huang, J., Zhang, Q., & Mai, L. (2017) · Advanced Materials · doi:10.1002/adma.201601759 · Cited by 1,616
Transition of lithium growth mechanisms in liquid electrolytes
Bai, P., Li, J., Brushett, F. R., & Bazant, M. Z. (2016) · Energy & Environmental Science · doi:10.1039/c6ee01674j · Cited by 1,591
Yang, C.-P., Yin, Y.-X., Zhang, S.-F., Li, N.-W., & Guo, Y.-G. (2015) · Nature Communications · doi:10.1038/ncomms9058 · Cited by 1,589
An Artificial Solid Electrolyte Interphase Layer for Stable Lithium Metal Anodes
Li, N., Yin, Y., Yang, C., & Guo, Y. (2016) · Advanced Materials · doi:10.1002/adma.201504526 · Cited by 1,577
The synergetic effect of lithium polysulfide and lithium nitrate to prevent lithium dendrite growth
Li, W., Yao, H., Yan, K., Zheng, G., Liang, Z., Chiang, Y.-M., & Cui, Y. (2015) · Nature Communications · doi:10.1038/ncomms8436 · Cited by 1,540
Accurate Determination of Coulombic Efficiency for Lithium Metal Anodes and Lithium Metal Batteries
Adams, B. D., Zheng, J., Ren, X., Xu, W., & Zhang, J. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702097 · Cited by 1,499
Non-flammable electrolyte enables Li-metal batteries with aggressive cathode chemistries
Fan, X., Chen, L., Borodin, O., Ji, X., Chen, J., Hou, S., Deng, T., Zheng, J., Yang, C., Liou, S.-C., et al. (2018) · Nature Nanotechnology · doi:10.1038/s41565-018-0183-2 · Cited by 1,371
Electrolyte additive enabled fast charging and stable cycling lithium metal batteries
Zheng, J., Engelhard, M. H., Mei, D., Jiao, S., Polzin, B. J., Zhang, J.-G., & Xu, W. (2017) · Nature Energy · doi:10.1038/nenergy.2017.12 · Cited by 1,343
High‐Voltage Lithium‐Metal Batteries Enabled by Localized High‐Concentration Electrolytes
Chen, S., Zheng, J., Mei, D., Han, K. S., Engelhard, M. H., Zhao, W., Xu, W., Liu, J., & Zhang, J. (2018) · Advanced Materials · doi:10.1002/adma.201706102 · Cited by 1,328
Reviving Lithium‐Metal Anodes for Next‐Generation High‐Energy Batteries
Guo, Y., Li, H., & Zhai, T. (2017) · Advanced Materials · doi:10.1002/adma.201700007 · Cited by 1,215
Wan, J., Xie, J., Kong, X., Liu, Z., Liu, K., Shi, F., Pei, A., Chen, H., Chen, W., Chen, J., et al. (2019) · Nature Nanotechnology · doi:10.1038/s41565-019-0465-3 · Cited by 1,171
Zhao, Q., Liu, X., Stalin, S., Khan, K., & Archer, L. A. (2019) · Nature Energy · doi:10.1038/s41560-019-0349-7 · Cited by 1,124
Self-citationA facile surface chemistry route to a stabilized lithium metal anode
Liang, X., Pang, Q., Kochetkov, I. R., Sempere, M. S., Huang, H., Sun, X., & Nazar, L. F. (2017) · Nature Energy · doi:10.1038/nenergy.2017.119 · Cited by 1,083
A Growing Appreciation for the Role of LiF in the Solid Electrolyte Interphase
Tan, J., Matz, J., Dong, P., Shen, J., & Ye, M. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202100046 · Cited by 1,019
Cheng, X., Hou, T., Zhang, R., Peng, H., Zhao, C., Huang, J., & Zhang, Q. (2016) · Advanced Materials · doi:10.1002/adma.201506124 · Cited by 994
High-voltage liquid electrolytes for Li batteries: progress and perspectives
Fan, X., & Wang, C. (2021) · Chemical Society Reviews · doi:10.1039/d1cs00450f · Cited by 980
A Highly Reversible Room-Temperature Sodium Metal Anode
Seh, Z. W., Sun, J., Sun, Y., & Cui, Y. (2015) · ACS Central Science · doi:10.1021/acscentsci.5b00328 · Cited by 979
Highly Fluorinated Interphases Enable High-Voltage Li-Metal Batteries
Fan, X., Chen, L., Ji, X., Deng, T., Hou, S., Chen, J., Zheng, J., Wang, F., Jiang, J., Xu, K., et al. (2018) · Chem · doi:10.1016/j.chempr.2017.10.017 · Cited by 961
Li, M., Wang, C., Chen, Z., Xu, K., & Lu, J. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00531 · Cited by 944
Sodium Metal Anodes: Emerging Solutions to Dendrite Growth
Lee, B., Paek, E., Mitlin, D., & Lee, S. W. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00642 · Cited by 940
All-temperature batteries enabled by fluorinated electrolytes with non-polar solvents
Fan, X., Ji, X., Chen, L., Chen, J., Deng, T., Han, F., Yue, J., Piao, N., Wang, R., Zhou, X., et al. (2019) · Nature Energy · doi:10.1038/s41560-019-0474-3 · Cited by 938
Lithium-coated polymeric matrix as a minimum volume-change and dendrite-free lithium metal anode
Liu, Y., Lin, D., Liang, Z., Zhao, J., Yan, K., & Cui, Y. (2016) · Nature Communications · doi:10.1038/ncomms10992 · Cited by 902
Designing polymers for advanced battery chemistries
Lopez, J., Mackanic, D. G., Cui, Y., & Bao, Z. (2019) · Nature Reviews Materials · doi:10.1038/s41578-019-0103-6 · Cited by 894
3D Porous Cu Current Collector/Li‐Metal Composite Anode for Stable Lithium‐Metal Batteries
Li, Q., Zhu, S., & Lu, Y. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201606422 · Cited by 854
Self-citationLiang, Z., Lin, D., Zhao, J., Lu, Z., Liu, Y., Liu, C., Lu, Y., Wang, H., Yan, K., Tao, X., et al. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1518188113 · Cited by 846
Self-citationPrestoring Lithium into Stable 3D Nickel Foam Host as Dendrite‐Free Lithium Metal Anode
Chi, S., Liu, Y., Song, W., Fan, L., & Zhang, Q. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201700348 · Cited by 846
Fu, K. (., Gong, Y., Liu, B., Zhu, Y., Xu, S., Yao, Y., Luo, W., Wang, C., Lacey, S. D., Dai, J., et al. (2017) · Science Advances · doi:10.1126/sciadv.1601659 · Cited by 842
Zhang, X., Chen, X., Cheng, X., Li, B., Shen, X., Yan, C., Huang, J., & Zhang, Q. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201801513 · Cited by 838
Fluorinated solid electrolyte interphase enables highly reversible solid-state Li metal battery
Fan, X., Ji, X., Han, F., Yue, J., Chen, J., Chen, L., Deng, T., Jiang, J., & Wang, C. (2018) · Science Advances · doi:10.1126/sciadv.aau9245 · Cited by 838
Cryo-STEM mapping of solid–liquid interfaces and dendrites in lithium-metal batteries
Zachman, M. J., Tu, Z., Choudhury, S., Archer, L. A., & Kourkoutis, L. F. (2018) · Nature · doi:10.1038/s41586-018-0397-3 · Cited by 823
Self-citationLithium/Sulfide All‐Solid‐State Batteries using Sulfide Electrolytes
Wu, J., Liu, S., Han, F., Yao, X., & Wang, C. (2021) · Advanced Materials · doi:10.1002/adma.202000751 · Cited by 809
Gao, Y., Yan, Z., Gray, J. L., He, X., Wang, D., Chen, T., Huang, Q., Li, Y. C., Wang, H., Kim, S. H., et al. (2019) · Nature Materials · doi:10.1038/s41563-019-0305-8 · Cited by 790
Zhang, H., Eshetu, G. G., Judez, X., Li, C., Rodriguez‐Martínez, L. M., & Armand, M. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201712702 · Cited by 774
2D MoS2 as an efficient protective layer for lithium metal anodes in high-performance Li–S batteries
Cha, E., Patel, M. D., Park, J., Hwang, J., Prasad, V., Cho, K., & Choi, W. (2018) · Nature Nanotechnology · doi:10.1038/s41565-018-0061-y · Cited by 767
Protected Lithium‐Metal Anodes in Batteries: From Liquid to Solid
Yang, C., Fu, K., Zhang, Y., Hitz, E., & Hu, L. (2017) · Advanced Materials · doi:10.1002/adma.201701169 · Cited by 757
Meng, Y. S., Srinivasan, V., & Xu, K. (2022) · Science · doi:10.1126/science.abq3750 · Cited by 751
Anode‐Free Rechargeable Lithium Metal Batteries
Qian, J., Adams, B. D., Zheng, J., Xu, W., Henderson, W. A., Wang, J., Bowden, M. E., Xu, S., Hu, J., & Zhang, J. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201602353 · Cited by 746
Lu, Q., He, Y., Yu, Q., Li, B., Kaneti, Y. V., Yao, Y., Kang, F., & Yang, Q. (2017) · Advanced Materials · doi:10.1002/adma.201604460 · Cited by 727
Towards practical lithium-metal anodes
Zhang, X., Yang, Y., & Zhou, Z. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00838a · Cited by 726
A Flexible Solid Electrolyte Interphase Layer for Long‐Life Lithium Metal Anodes
Li, N., Shi, Y., Yin, Y., Zeng, X., Li, J., Li, C., Wan, L., Wen, R., & Guo, Y. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201710806 · Cited by 721
Artificial Interphases for Highly Stable Lithium Metal Anode
Xu, R., Cheng, X.-B., Yan, C., Zhang, X.-Q., Xiao, Y., Zhao, C.-Z., Huang, J.-Q., & Zhang, Q. (2019) · Matter · doi:10.1016/j.matt.2019.05.016 · Cited by 721
Fluorinated Solid-Electrolyte Interphase in High-Voltage Lithium Metal Batteries
Li, T., Zhang, X.-Q., Shi, P., & Zhang, Q. (2019) · Joule · doi:10.1016/j.joule.2019.09.022 · Cited by 714
Xu, C., Lindgren, F., Philippe, B., Gorgoi, M., Björefors, F., Edström, K., & Gustafsson, T. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b00339 · Cited by 690
Pyrite FeS2for high-rate and long-life rechargeable sodium batteries
Hu, Z., Zhu, Z., Cheng, F., Zhang, K., Wang, J., Chen, C., & Chen, J. (2015) · Energy & Environmental Science · doi:10.1039/c4ee03759f · Cited by 686
Zhang, R., Cheng, X., Zhao, C., Peng, H., Shi, J., Huang, J., Wang, J., Wei, F., & Zhang, Q. (2016) · Advanced Materials · doi:10.1002/adma.201504117 · Cited by 686
A review of flexible lithium–sulfur and analogous alkali metal–chalcogen rechargeable batteries
Peng, H.-J., Huang, J.-Q., & Zhang, Q. (2017) · Chemical Society Reviews · doi:10.1039/c7cs00139h · Cited by 680
Fluorine-donating electrolytes enable highly reversible 5-V-class Li metal batteries
Suo, L., Xue, W., Gobet, M., Greenbaum, S. G., Wang, C., Chen, Y., Yang, W., Li, Y., & Li, J. (2018) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1712895115 · Cited by 679
Free-Standing Copper Nanowire Network Current Collector for Improving Lithium Anode Performance
Lu, L.-L., Ge, J., Yang, J.-N., Chen, S.-M., Yao, H.-B., Zhou, F., & Yu, S.-H. (2016) · Nano Letters · doi:10.1021/acs.nanolett.6b01581 · Cited by 678
Artificial Soft–Rigid Protective Layer for Dendrite‐Free Lithium Metal Anode
Xu, R., Zhang, X., Cheng, X., Peng, H., Zhao, C., Yan, C., & Huang, J. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201705838 · Cited by 670
Ultrafine Silver Nanoparticles for Seeded Lithium Deposition toward Stable Lithium Metal Anode
Yang, C., Yao, Y., He, S., Xie, H., Hitz, E., & Hu, L. (2017) · Advanced Materials · doi:10.1002/adma.201702714 · Cited by 661
High-Efficiency Lithium Metal Batteries with Fire-Retardant Electrolytes
Chen, S., Zheng, J., Yu, L., Ren, X., Engelhard, M. H., Niu, C., Lee, H., Xu, W., Xiao, J., Liu, J., et al. (2018) · Joule · doi:10.1016/j.joule.2018.05.002 · Cited by 654
Beyond lithium ion batteries: Higher energy density battery systems based on lithium metal anodes
Shen, X., Liu, H., Cheng, X.-B., Yan, C., & Huang, J.-Q. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2017.12.002 · Cited by 653
Stabilizing metal battery anodes through the design of solid electrolyte interphases
Zhao, Q., Stalin, S., & Archer, L. A. (2021) · Joule · doi:10.1016/j.joule.2021.03.024 · Cited by 629
Self-citationIonic liquids and derived materials for lithium and sodium batteries
Yang, Q., Zhang, Z., Sun, X.-G., Hu, Y.-S., Xing, H., & Dai, S. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00464h · Cited by 601
Liquid electrolyte: The nexus of practical lithium metal batteries
Wang, H., Yu, Z., Kong, X., Kim, S. C., Boyle, D. T., Qin, J., Bao, Z., & Cui, Y. (2022) · Joule · doi:10.1016/j.joule.2021.12.018 · Cited by 596
Self-smoothing anode for achieving high-energy lithium metal batteries under realistic conditions
Niu, C., Pan, H., Xu, W., Xiao, J., Zhang, J.-G., Luo, L., Wang, C., Mei, D., Meng, J., Wang, X., et al. (2019) · Nature Nanotechnology · doi:10.1038/s41565-019-0427-9 · Cited by 589
Current Challenges and Routes Forward for Nonaqueous Lithium–Air Batteries
Liu, T., Vivek, J. P., Zhao, E. W., Lei, J., Garcia-Araez, N., & Grey, C. P. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00545 · Cited by 589
A stable room-temperature sodium–sulfur battery
Wei, S., Xu, S., Agrawral, A., Choudhury, S., Lu, Y., Tu, Z., Ma, L., & Archer, L. A. (2016) · Nature Communications · doi:10.1038/ncomms11722 · Cited by 589
Self-citationZhu, B., Jin, Y., Hu, X., Zheng, Q., Zhang, S., Wang, Q., & Zhu, J. (2017) · Advanced Materials · doi:10.1002/adma.201603755 · Cited by 587
Graphitized Carbon Fibers as Multifunctional 3D Current Collectors for High Areal Capacity Li Anodes
Zuo, T., Wu, X., Yang, C., Yin, Y., Ye, H., Li, N., & Guo, Y. (2017) · Advanced Materials · doi:10.1002/adma.201700389 · Cited by 579
Lithium Metal Anodes with an Adaptive “Solid-Liquid” Interfacial Protective Layer
Liu, K., Pei, A., Lee, H. R., Kong, B., Liu, N., Lin, D., Liu, Y., Liu, C., Hsu, P.-C., Bao, Z., et al. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.6b13314 · Cited by 560
Advanced Micro/Nanostructures for Lithium Metal Anodes
Zhang, R., Li, N., Cheng, X., Yin, Y., Zhang, Q., & Guo, Y. (2017) · Advanced Science · doi:10.1002/advs.201600445 · Cited by 549
Towards High‐Safe Lithium Metal Anodes: Suppressing Lithium Dendrites via Tuning Surface Energy
Wang, D., Zhang, W., Zheng, W., Cui, X., Rojo, T., & Zhang, Q. (2017) · Advanced Science · doi:10.1002/advs.201600168 · Cited by 548
Polymer Nanofiber-Guided Uniform Lithium Deposition for Battery Electrodes
Liang, Z., Zheng, G., Liu, C., Liu, N., Li, W., Yan, K., Yao, H., Hsu, P.-C., Chu, S., & Cui, Y. (2015) · Nano Letters · doi:10.1021/nl5046318 · Cited by 540
Liu, L., Yin, Y., Li, J., Wang, S., Guo, Y., & Wan, L. (2018) · Advanced Materials · doi:10.1002/adma.201706216 · Cited by 538
Thermodynamic Understanding of Li-Dendrite Formation
Gao, X., Zhou, Y.-N., Han, D., Zhou, J., Zhou, D., Tang, W., & Goodenough, J. B. (2020) · Joule · doi:10.1016/j.joule.2020.06.016 · Cited by 537
Graphene-based composites for electrochemical energy storage
Wang, B., Ruan, T., Chen, Y., Jin, F., Peng, L., Zhou, Y., Wang, D., & Dou, S. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2019.08.004 · Cited by 530
Self-heating–induced healing of lithium dendrites
Li, L., Basu, S., Wang, Y., Chen, Z., Hundekar, P., Wang, B., Shi, J., Shi, Y., Narayanan, S., & Koratkar, N. (2018) · Science · doi:10.1126/science.aap8787 · Cited by 528
Implantable Solid Electrolyte Interphase in Lithium-Metal Batteries
Cheng, X.-B., Yan, C., Chen, X., Guan, C., Huang, J.-Q., Peng, H.-J., Zhang, R., Yang, S.-T., & Zhang, Q. (2017) · Chem · doi:10.1016/j.chempr.2017.01.003 · Cited by 524
Zheng, J., Lochala, J. A., Kwok, A., Deng, Z. D., & Xiao, J. (2017) · Advanced Science · doi:10.1002/advs.201700032 · Cited by 524
Nanostructured energy materials for electrochemical energy conversion and storage: A review
Zhang, X., Cheng, X., & Zhang, Q. (2016) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2016.11.003 · Cited by 516
Surface Fluorination of Reactive Battery Anode Materials for Enhanced Stability
Zhao, J., Liao, L., Shi, F., Lei, T., Chen, G., Pei, A., Sun, J., Yan, K., Zhou, G., Xie, J., et al. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b05251 · Cited by 514
Dual‐Layered Film Protected Lithium Metal Anode to Enable Dendrite‐Free Lithium Deposition
Yan, C., Cheng, X., Tian, Y., Chen, X., Zhang, X., Li, W., Huang, J., & Zhang, Q. (2018) · Advanced Materials · doi:10.1002/adma.201707629 · Cited by 513
High-capacity, low-tortuosity, and channel-guided lithium metal anode
Zhang, Y., Luo, W., Wang, C., Li, Y., Chen, C., Song, J., Dai, J., Hitz, E. M., Xu, S., Yang, C., et al. (2017) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1618871114 · Cited by 472
Uniform High Ionic Conducting Lithium Sulfide Protection Layer for Stable Lithium Metal Anode
Chen, H., Pei, A., Lin, D., Xie, J., Yang, A., Xu, J., Lin, K., Wang, J., Wang, H., Shi, F., et al. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201900858 · Cited by 472
Stabilizing lithium metal using ionic liquids for long-lived batteries
Basile, A., Bhatt, A. I., & O’Mullane, A. P. (2016) · Nature Communications · doi:10.1038/ncomms11794 · Cited by 467
Li, W., Dolocan, A., Oh, P., Celio, H., Park, S., Cho, J., & Manthiram, A. (2017) · Nature Communications · doi:10.1038/ncomms14589 · Cited by 466
Zheng, J., Kim, M. S., Tu, Z., Choudhury, S., Tang, T., & Archer, L. A. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00883g · Cited by 466
Self-citationLin, D., Liu, Y., Chen, W., Zhou, G., Liu, K., Dunn, B., & Cui, Y. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b01020 · Cited by 465
Making Li-metal electrodes rechargeable by controlling the dendrite growth direction
Liu, Y., Liu, Q., Xin, L., Liu, Y., Yang, F., Stach, E. A., & Xie, J. (2017) · Nature Energy · doi:10.1038/nenergy.2017.83 · Cited by 464
Sheng, O., Zheng, J., Ju, Z., Jin, C., Wang, Y., Chen, M., Nai, J., Liu, T., Zhang, W., Liu, Y., et al. (2020) · Advanced Materials · doi:10.1002/adma.202000223 · Cited by 463
Zeng, X.-X., Yin, Y.-X., Li, N.-W., Du, W.-C., Guo, Y.-G., & Wan, L.-J. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b10088 · Cited by 459
Zhao, Y., Ding, Y., Li, Y., Peng, L., Byon, H. R., Goodenough, J. B., & Yu, G. (2015) · Chemical Society Reviews · doi:10.1039/c5cs00289c · Cited by 458
Aluminium-ion batteries: developments and challenges
Das, S. K., Mahapatra, S., & Lahan, H. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta00228a · Cited by 458
Review on Li Deposition in Working Batteries: From Nucleation to Early Growth
Chen, X., Zhao, B., Yan, C., & Zhang, Q. (2021) · Advanced Materials · doi:10.1002/adma.202004128 · Cited by 456
Organic batteries for a greener rechargeable world
Kim, J., Kim, Y., Yoo, J., Kwon, G., Ko, Y., & Kang, K. (2022) · Nature Reviews Materials · doi:10.1038/s41578-022-00478-1 · Cited by 456
Stabilizing Lithium Metal Anodes by Uniform Li-Ion Flux Distribution in Nanochannel Confinement
Liu, W., Lin, D., Pei, A., & Cui, Y. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b08730 · Cited by 455
Metadata
- Authors
- Lu, Y., Tu, Z., & Archer, L. A.
- Venue
- Nature Materials
- Published
- 2014-08-10
- Volume
- 13
- Issue
- 10
- Pages
- 961-969
- ISSN
- 1476-1122 (ISSN-L)
- 1476-4660
- OpenAlex
- W2070416274
- Cited by
- 1,592
- References
- 39
- FWCI
- 46.52
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.