The DOI matches its Crossref record; 123 of the 123 references it cites were found in a registry or an index.
A Review of Three-Dimensional Printing in Tissue Engineering
Abstract
Recent advances in three-dimensional (3D) printing technologies have led to a rapid expansion of applications from the creation of anatomical training models for complex surgical procedures to the printing of tissue engineering constructs. In addition to achieving the macroscale geometry of organs and tissues, a print layer thickness as small as 20 μm allows for reproduction of the microarchitectures of bone and other tissues. Techniques with even higher precision are currently being investigated to enable reproduction of smaller tissue features such as hepatic lobules. Current research in tissue engineering focuses on the development of compatible methods (printers) and materials (bioinks) that are capable of producing biomimetic scaffolds. In this review, an overview of current 3D printing techniques used in tissue engineering is provided with an emphasis on the printing mechanism and the resultant scaffold characteristics. Current practical challenges and technical limitations are emphasized and future trends of bioprinting are discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
Geometric Control of Cell Life and Death
Chen, C. S., Mrksich, M., Huang, S., Whitesides, G. M., & Ingber, D. E. (1997) · Science · doi:10.1126/science.276.5317.1425 · Cited by 4,657
Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing
Gibson, I., Rosen, D. W., & Stucker, B. (2010) · National University of Singapore · doi:10.1007/978-1-4419-1120-9 · Cited by 2,969
Cell-laden microengineered gelatin methacrylate hydrogels
Nichol, J. W., Koshy, S. T., Bae, H., Hwang, C. M., Yamanlar, S., & Khademhosseini, A. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.03.064 · Cited by 2,377
The design of scaffolds for use in tissue engineering. Part I. Traditional factors
Yang, S., Leong, K.-F., Du, Z., & Chua, C.-K. (2001) · Tissue Engineering · doi:10.1089/107632701753337645 · Cited by 2,234
3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs
Kolesky, D. B., Truby, R. L., Gladman, A. S., Busbee, T. A., Homan, K. A., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201305506 · Cited by 2,102
Novel crosslinking methods to design hydrogels
Hennink, W. E., & van Nostrum, C. F. (2002) · Advanced Drug Delivery Reviews · doi:10.1016/s0169-409x(01)00240-x · Cited by 1,962
Printing three-dimensional tissue analogues with decellularized extracellular matrix bioink
Pati, F., Jang, J., Ha, D.-H., Won Kim, S., Rhie, J.-W., Shim, J.-H., Kim, D.-H., & Cho, D.-W. (2014) · Nature Communications · doi:10.1038/ncomms4935 · Cited by 1,904
Fused deposition modeling of novel scaffold architectures for tissue engineering applications
Zein, I., Hutmacher, D. W., Tan, K. C., & Teoh, S. H. (2002) · Biomaterials · doi:10.1016/s0142-9612(01)00232-0 · Cited by 1,874
Bone tissue engineering using 3D printing
Bose, S., Vahabzadeh, S., & Bandyopadhyay, A. (2013) · Materials Today · doi:10.1016/j.mattod.2013.11.017 · Cited by 1,866
Tissue-engineered autologous bladders for patients needing cystoplasty
Atala, A., Bauer, S. B., Soker, S., Yoo, J. J., & Retik, A. B. (2006) · The Lancet · doi:10.1016/s0140-6736(06)68438-9 · Cited by 1,833
Direct Ink Writing of 3D Functional Materials
Lewis, J. A. (2006) · Advanced Functional Materials · doi:10.1002/adfm.200600434 · Cited by 1,740
3D‐Printing of Lightweight Cellular Composites
Compton, B. G., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201401804 · Cited by 1,626
Embedded 3D Printing of Strain Sensors within Highly Stretchable Elastomers
Muth, J. T., Vogt, D. M., Truby, R. L., Mengüç, Y., Kolesky, D. B., Wood, R. J., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201400334 · Cited by 1,611
Organ printing: computer-aided jet-based 3D tissue engineering
Mironov, V., Boland, T., Trusk, T., Forgacs, G., & Markwald, R. R. (2003) · Trends in Biotechnology · doi:10.1016/s0167-7799(03)00033-7 · Cited by 1,276
Leong, K. F., Cheah, C. M., & Chua, C. K. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00030-9 · Cited by 1,076
Inkjet printing of viable mammalian cells
Xu, T., Jin, J., Gregory, C., Hickman, J. J., & Boland, T. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.04.011 · Cited by 1,035
Billiet, T., Gevaert, E., De Schryver, T., Cornelissen, M., & Dubruel, P. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2013.09.078 · Cited by 1,015
3D Printing of Highly Stretchable and Tough Hydrogels into Complex, Cellularized Structures
Hong, S., Sycks, D., Chan, H. F., Lin, S., Lopez, G. P., Guilak, F., Leong, K. W., & Zhao, X. (2015) · Advanced Materials · doi:10.1002/adma.201501099 · Cited by 873
Laser assisted bioprinting of engineered tissue with high cell density and microscale organization
Guillotin, B., Souquet, A., Catros, S., Duocastella, M., Pippenger, B., Bellance, S., Bareille, R., Rémy, M., Bordenave, L., Amédée, J., et al. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.05.055 · Cited by 832
Omnidirectional Printing of 3D Microvascular Networks
Wu, W., DeConinck, A., & Lewis, J. A. (2011) · Advanced Materials · doi:10.1002/adma.201004625 · Cited by 819
De novo reconstitution of a functional mammalian urinary bladder by tissue engineering
Oberpenning, F., Meng, J., Yoo, J. J., & Atala, A. (1999) · Nature Biotechnology · doi:10.1038/6146 · Cited by 800
Effect of Pore Size and Void Fraction on Cellular Adhesion, Proliferation, and Matrix Deposition
Zeltinger, J., Sherwood, J. K., Graham, D. A., Müeller, R., & Griffith, L. G. (2001) · Tissue Engineering · doi:10.1089/107632701753213183 · Cited by 794
Schuurman, W., Levett, P. A., Pot, M. W., van Weeren, P. R., Dhert, W. J. A., Hutmacher, D. W., Melchels, F. P. W., Klein, T. J., & Malda, J. (2013) · Macromolecular Bioscience · doi:10.1002/mabi.201200471 · Cited by 790
The Design of Scaffolds for Use in Tissue Engineering. Part II. Rapid Prototyping Techniques
Yang, S., Leong, K.-F., Du, Z., & Chua, C.-K. (2002) · Tissue Engineering · doi:10.1089/107632702753503009 · Cited by 729
Bioprinting Toward Organ Fabrication: Challenges and Future Trends
Ozbolat, I. T., & Yu, Y. (2013) · IEEE Transactions on Biomedical Engineering · doi:10.1109/tbme.2013.2243912 · Cited by 666
Bioprinted Amniotic Fluid-Derived Stem Cells Accelerate Healing of Large Skin Wounds
Skardal, A., Mack, D., Kapetanovic, E., Atala, A., Jackson, J. D., Yoo, J., & Soker, S. (2012) · Stem Cells Translational Medicine · doi:10.5966/sctm.2012-0088 · Cited by 660
Direct-write bioprinting of cell-laden methacrylated gelatin hydrogels
Bertassoni, L. E., Cardoso, J. C., Manoharan, V., Cristino, A. L., Bhise, N. S., Araujo, W. A., Zorlutuna, P., Vrana, N. E., Ghaemmaghami, A. M., Dokmeci, M. R., et al. (2014) · Biofabrication · doi:10.1088/1758-5082/6/2/024105 · Cited by 642
Landers, R., Hübner, U., Schmelzeisen, R., & Mülhaupt, R. (2002) · Biomaterials · doi:10.1016/s0142-9612(02)00139-4 · Cited by 624
Michael, S., Sorg, H., Peck, C.-T., Koch, L., Deiwick, A., Chichkov, B., Vogt, P. M., & Reimers, K. (2013) · PLoS ONE · doi:10.1371/journal.pone.0057741 · Cited by 623
Scaffold development using 3D printing with a starch-based polymer
Lam, C. X. F., Mo, X. M., Teoh, S. H., & Hutmacher, D. W. (2002) · Materials Science and Engineering: C · doi:10.1016/s0928-4931(02)00012-7 · Cited by 614
Skin tissue generation by laser cell printing
Koch, L., Deiwick, A., Schlie, S., Michael, S., Gruene, M., Coger, V., Zychlinski, D., Schambach, A., Reimers, K., Vogt, P. M., et al. (2012) · Biotechnology and Bioengineering · doi:10.1002/bit.24455 · Cited by 609
Tissue engineering by self-assembly and bio-printing of living cells
Jakab, K., Norotte, C., Marga, F., Murphy, K., Vunjak-Novakovic, G., & Forgacs, G. (2010) · Biofabrication · doi:10.1088/1758-5082/2/2/022001 · Cited by 593
Bioresorbable Airway Splint Created with a Three-Dimensional Printer
Zopf, D. A., Hollister, S. J., Nelson, M. E., Ohye, R. G., & Green, G. E. (2013) · New England Journal of Medicine · doi:10.1056/nejmc1206319 · Cited by 589
Use of stereolithography to manufacture critical‐sized 3D biodegradable scaffolds for bone ingrowth
Cooke, M. N., Fisher, J. P., Dean, D., Rimnac, C., & Mikos, A. G. (2003) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.10485 · Cited by 571
Mechanical and in vivo performance of hydroxyapatite implants with controlled architectures
Chu, T.-M. G., Orton, D. G., Hollister, S. J., Feinberg, S. E., & Halloran, J. W. (2002) · Biomaterials · doi:10.1016/s0142-9612(01)00243-5 · Cited by 554
Kundu, J., Shim, J.-H., Jang, J., Kim, S.-W., & Cho, D.-W. (2015) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.1682 · Cited by 552
Christman, K. L., Vardanian, A. J., Fang, Q., Sievers, R. E., Fok, H. H., & Lee, R. J. (2004) · Journal of the American College of Cardiology · doi:10.1016/j.jacc.2004.04.040 · Cited by 545
Evaluation of hydrogels for bio‐printing applications
Murphy, S. V., Skardal, A., & Atala, A. (2013) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.34326 · Cited by 543
Viability and electrophysiology of neural cell structures generated by the inkjet printing method
Xu, T., Gregory, C. A., Molnar, P., Cui, X., Jalota, S., Bhaduri, S. B., & Boland, T. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.01.048 · Cited by 520
Characterization of cell viability during bioprinting processes
Nair, K., Gandhi, M., Khalil, S., Yan, K. C., Marcolongo, M., Barbee, K., & Sun, W. (2009) · Biotechnology Journal · doi:10.1002/biot.200900004 · Cited by 510
Hydroxyapatite scaffolds for bone tissue engineering made by 3D printing
Leukers, B., Gülkan, H., Irsen, S. H., Milz, S., Tille, C., Schieker, M., & Seitz, H. (2005) · Journal of Materials Science: Materials in Medicine · doi:10.1007/s10856-005-4716-5 · Cited by 499
Laser Printing of Skin Cells and Human Stem Cells
Koch, L., Kuhn, S., Sorg, H., Gruene, M., Schlie, S., Gaebel, R., Polchow, B., Reimers, K., Stoelting, S., Ma, N., et al. (2010) · Tissue Engineering Part C: Methods · doi:10.1089/ten.tec.2009.0397 · Cited by 476
High-throughput laser printing of cells and biomaterials for tissue engineering
Guillemot, F., Souquet, A., Catros, S., Guillotin, B., Lopez, J., Faucon, M., Pippenger, B., Bareille, R., Rémy, M., Bellance, S., et al. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.09.029 · Cited by 475
Fedorovich, N. E., Alblas, J., de Wijn, J. R., Hennink, W. E., Verbout, A. J., & Dhert, W. J. A. (2007) · Tissue Engineering · doi:10.1089/ten.2006.0175 · Cited by 467 · cited 1×
“60 There are three broad categories of bioprinting, namely mi-croextrusion, LAB, and inkjet-based bioprinting (Fig.”
Kim, S. S., Utsunomiya, H., Koski, J. A., Wu, B. M., Cima, M. J., Sohn, J., Mukai, K., Griffith, L. G., & Vacanti, J. P. (1998) · Annals of Surgery · doi:10.1097/00000658-199807000-00002 · Cited by 451
Direct‐write bioprinting three‐dimensional biohybrid systems for future regenerative therapies
Chang, C. C., Boland, E. D., Williams, S. K., & Hoying, J. B. (2011) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.31831 · Cited by 445
A poly(d,l-lactide) resin for the preparation of tissue engineering scaffolds by stereolithography
Melchels, F. P. W., Feijen, J., & Grijpma, D. W. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.03.055 · Cited by 437
Cell patterning technologies for organotypic tissue fabrication
Guillotin, B., & Guillemot, F. (2011) · Trends in Biotechnology · doi:10.1016/j.tibtech.2010.12.008 · Cited by 428
Bioprinting Technology: A Current State-of-the-Art Review
Dababneh, A. B., & Ozbolat, I. T. (2014) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4028512 · Cited by 427
Photocrosslinkable Hyaluronan-Gelatin Hydrogels for Two-Step Bioprinting
Skardal, A., Zhang, J., McCoard, L., Xu, X., Oottamasathien, S., & Prestwich, G. D. (2010) · Tissue Engineering Part A · doi:10.1089/ten.tea.2009.0798 · Cited by 424
Mechanical properties of dense polylactic acid structures fabricated by three dimensional printing
GIORDANO, R. A., Wu, B. M., Borland, S. W., Cima, L. G., Sachs, E. M., & Cima, M. J. (1997) · Journal of Biomaterials Science, Polymer Edition · doi:10.1163/156856297x00588 · Cited by 413
Fedorovich, N. E., De Wijn, J. R., Verbout, A. J., Alblas, J., & Dhert, W. J. A. (2008) · Tissue Engineering Part A · doi:10.1089/ten.a.2007.0158 · Cited by 410
Bioprinting of hybrid tissue constructs with tailorable mechanical properties
Schuurman, W., Khristov, V, Pot, M. W., van Weeren, P. R., Dhert, W. J. A., & Malda, J. (2011) · Biofabrication · doi:10.1088/1758-5082/3/2/021001 · Cited by 409
Additive manufacturing techniques for the production of tissue engineering constructs
Mota, C., Puppi, D., Chiellini, F., & Chiellini, E. (2015) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.1635 · Cited by 382
Cell and organ printing 2: Fusion of cell aggregates in three‐dimensional gels
Boland, T., Mironov, V., Gutowska, A., Roth, E. A., & Markwald, R. R. (2003) · The Anatomical Record Part A: Discoveries in Molecular, Cellular, and Evolutionary Biology · doi:10.1002/ar.a.10059 · Cited by 382
Three-Dimensional BioAssembly Tool for Generating Viable Tissue-Engineered Constructs
Smith, C. M., Stone, A. L., Parkhill, R. L., Stewart, R. L., Simpkins, M. W., Kachurin, A. M., Warren, W. L., & Williams, S. K. (2004) · Tissue Engineering · doi:10.1089/1076327042500274 · Cited by 373
Tarafder, S., Balla, V. K., Davies, N. M., Bandyopadhyay, A., & Bose, S. (2013) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.555 · Cited by 364
Tissue Engineering: The Challenges Ahead
Langer, R. S., & Vacanti, J. P. (1999) · Scientific American · doi:10.1038/scientificamerican0499-86 · Cited by 362
Phillippi, J. A., Miller, E., Weiss, L., Huard, J., Waggoner, A., & Campbell, P. (2008) · Stem Cells · doi:10.1634/stemcells.2007-0520 · Cited by 361
Generation of Three-Dimensional Hepatocyte/Gelatin Structures with Rapid Prototyping System
Wang, X., Yan, Y., Pan, Y., Xiong, Z., Liu, H., Cheng, J., Liu, F., Lin, F., Wu, R., Zhang, R., et al. (2006) · Tissue Engineering · doi:10.1089/ten.2006.12.83 · Cited by 353
Patterning human stem cells and endothelial cells with laser printing for cardiac regeneration
Gaebel, R., Ma, N., Liu, J., Guan, J., Koch, L., Klopsch, C., Gruene, M., Toelk, A., Wang, W., Mark, P., et al. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2011.08.071 · Cited by 351
Multi‐nozzle deposition for construction of 3D biopolymer tissue scaffolds
Khalil, S., Nam, J., & Sun, W. (2005) · Rapid Prototyping Journal · doi:10.1108/13552540510573347 · Cited by 351
Park, A., Wu, B., & Griffith, L. G. (1998) · Journal of Biomaterials Science, Polymer Edition · doi:10.1163/156856298x00451 · Cited by 322
Vascularized Bone Tissue Engineering: Approaches for Potential Improvement
Nguyen, L. H., Annabi, N., Nikkhah, M., Bae, H., Binan, L., Park, S., Kang, Y., Yang, Y., & Khademhosseini, A. (2012) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2012.0012 · Cited by 313
Evaluating 3D‐Printed Biomaterials as Scaffolds for Vascularized Bone Tissue Engineering
Wang, M. O., Vorwald, C. E., Dreher, M. L., Mott, E. J., Cheng, M., Cinar, A., Mehdizadeh, H., Somo, S., Dean, D., Brey, E. M., et al. (2015) · Advanced Materials · doi:10.1002/adma.201403943 · Cited by 301
Kesti, M., Müller, M., Becher, J., Schnabelrauch, M., D’Este, M., Eglin, D., & Zenobi-Wong, M. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.09.033 · Cited by 294
Fabrication of viable tissue-engineered constructs with 3D cell-assembly technique
Yan, Y., Wang, X., Pan, Y., Liu, H., Cheng, J., Xiong, Z., Lin, F., Wu, R., Zhang, R., & Lu, Q. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.02.027 · Cited by 284
Keriquel, V., Guillemot, F., Arnault, I., Guillotin, B., Miraux, S., Amédée, J., Fricain, J.-C., & Catros, S. (2010) · Biofabrication · doi:10.1088/1758-5082/2/1/014101 · Cited by 280
Digital material fabrication using mask‐image‐projection‐based stereolithography
Zhou, C., Chen, Y., Yang, Z., & Khoshnevis, B. (2013) · Rapid Prototyping Journal · doi:10.1108/13552541311312148 · Cited by 267
Landers, R., & Mülhaupt, R. (2000) · Macromolecular Materials and Engineering · doi:10.1002/1439-2054(20001001)282:1<17::aid-mame17>3.0.co;2-8 · Cited by 261
Khalyfa, A., Vogt, S., Weisser, J., Grimm, G., Rechtenbach, A., Meyer, W., & Schnabelrauch, M. (2007) · Journal of Materials Science: Materials in Medicine · doi:10.1007/s10856-006-0073-2 · Cited by 247
Functional Biomaterials: Design of Novel Biomaterials
Sakiyama-Elbert, S., & Hubbell, J. (2001) · Annual Review of Materials Research · doi:10.1146/annurev.matsci.31.1.183 · Cited by 238
Controlled Positioning of Cells in Biomaterials—Approaches Towards 3D Tissue Printing
Wüst, S., Müller, R., & Hofmann, S. (2011) · Journal of Functional Biomaterials · doi:10.3390/jfb2030119 · Cited by 231
Mol, A., Driessen, N. J. B., Rutten, M. C. M., Hoerstrup, S. P., Bouten, C. V. C., & Baaijens, F. P. T. (2005) · Annals of Biomedical Engineering · doi:10.1007/s10439-005-8025-4 · Cited by 225
Micro-bioreactor array for controlling cellular microenvironments
Figallo, E., Cannizzaro, C., Gerecht, S., Burdick, J. A., Langer, R., Elvassore, N., & Vunjak-Novakovic, G. (2007) · Lab on a Chip · doi:10.1039/b700063d · Cited by 220
Tissue engineering of human bladder
Atala, A. (2011) · British Medical Bulletin · doi:10.1093/bmb/ldr003 · Cited by 219
Low temperature direct 3D printed bioceramics and biocomposites as drug release matrices
Gbureck, U., Vorndran, E., Müller, F. A., & Barralet, J. E. (2007) · Journal of Controlled Release · doi:10.1016/j.jconrel.2007.06.022 · Cited by 213
Adult rat retinal ganglion cells and glia can be printed by piezoelectric inkjet printing
Lorber, B., Hsiao, W.-K., Hutchings, I. M., & Martin, K. R. (2013) · Biofabrication · doi:10.1088/1758-5082/6/1/015001 · Cited by 207
Three-Dimensional Printing of Nanomaterial Scaffolds for Complex Tissue Regeneration
O'Brien, C. M., Holmes, B., Faucett, S., & Zhang, L. G. (2015) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2014.0168 · Cited by 201
The Billion Cell Construct: Will Three-Dimensional Printing Get Us There?
Miller, J. S. (2014) · PLoS Biology · doi:10.1371/journal.pbio.1001882 · Cited by 199
Simpson, R. L., Wiria, F. E., Amis, A. A., Chua, C. K., Leong, K. F., Hansen, U. N., Chandrasekaran, M., & Lee, M. W. (2008) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.30839 · Cited by 181
Porous ceramic bone scaffolds for vascularized bone tissue regeneration
Will, J., Melcher, R., Treul, C., Travitzky, N., Kneser, U., Polykandriotis, E., Horch, R., & Greil, P. (2008) · Journal of Materials Science: Materials in Medicine · doi:10.1007/s10856-007-3346-5 · Cited by 179
Li, L., & Fourkas, J. T. (2007) · Materials Today · doi:10.1016/s1369-7021(07)70130-x · Cited by 179
Tissue Engineering at the Micro-Scale
Bhatia, S. N., & Chen, C. S. (1999) · Biomedical Microdevices · doi:10.1023/a:1009949704750 · Cited by 177
Visconti, R. P., Ebihara, Y., LaRue, A. C., Fleming, P. A., McQuinn, T. C., Masuya, M., Minamiguchi, H., Markwald, R. R., Ogawa, M., & Drake, C. J. (2006) · Circulation Research · doi:10.1161/01.res.0000207384.81818.d4 · Cited by 177
Solid Freeform Fabrication Proceedings -1999
Bourell, D. L., Beaman, J. J., Jr., C., Richard H., M., Harris L., B., & Joel, W. (1999) · doi:10.21236/ada377264 · Cited by 173
TISSUE ENGINEERING BIOREACTORS
Freed, L. E., & Vunjak-Novakovic, G. (2000) · Principles of Tissue Engineering · doi:10.1016/b978-012436630-5/50017-9 · Cited by 168
Multiphoton polymerization of hybrid materials
Farsari, M., Vamvakaki, M., & Chichkov, B. N. (2010) · Journal of Optics · doi:10.1088/2040-8978/12/12/124001 · Cited by 161
Choi, R., & Vacanti, J. P. (1997) · Transplantation Proceedings · doi:10.1016/s0041-1345(96)00164-9 · Cited by 158
Biodegradable Fumarate-Based PolyHIPEs as Tissue Engineering Scaffolds
Christenson, E. M., Soofi, W., Holm, J. L., Cameron, N. R., & Mikos, A. G. (2007) · Biomacromolecules · doi:10.1021/bm7007235 · Cited by 152
Pore size and pore volume effects on alumina and TCP ceramic scaffolds
Bose, S., Darsell, J. T., Kintner, M., et al. (2002) · Materials Science and Engineering C · doi:10.1016/s0928-4931(02)00129-7 · Cited by 146
Shuai, C., Li, P., Liu, J., & Peng, S. (2013) · Materials Characterization · doi:10.1016/j.matchar.2012.12.009 · Cited by 137
Direct Printing of Bioceramic Implants with Spatially Localized Angiogenic Factors
Gbureck, U., Hölzel, T., Doillon, C. J., Müller, F. A., & Barralet, J. E. (2007) · Advanced Materials · doi:10.1002/adma.200601370 · Cited by 137
Printing cell-laden gelatin constructs by free-form fabrication and enzymatic protein crosslinking
Irvine, S. A., Agrawal, A., Lee, B. H., Chua, H. Y., Low, K. Y., Lau, B. C., Machluf, M., & Venkatraman, S. S. (2015) · Biomedical Microdevices · doi:10.1007/s10544-014-9915-8 · Cited by 136
Cooper, G. M., Miller, E. D., DeCesare, G. E., Ūsas, A., Lensie, E. L., Bykowski, M. R., Huard, J., Weiss, L. E., Losee, J. E., & Campbell, P. G. (2009) · Tissue Engineering Part A · doi:10.1089/ten.tea.2009.0650 · Cited by 135
Shanjani, Y., Croos, J. N. A. D., Pilliar, R. M., et al. (2010) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.31610 · Cited by 121
Smith, C. M., Christian, J. J., Warren, W. L., & Williams, S. K. (2007) · Tissue Engineering · doi:10.1089/ten.2006.0101 · Cited by 116
Alginate gelation-induced cell death during laser-assisted cell printing
Gudapati, H., Yan, J., Huang, Y. H., & Chrisey, D. B. (2014) · Biofabrication · doi:10.1088/1758-5082/6/3/035022 · Cited by 115
Pham, D. T., & Dimov, S. (2001) · Springer eBooks · doi:10.1007/978-1-4471-0703-3 · Cited by 112
Bae, H., Chu, H., Edalat, F., Cha, J. M., Sant, S., Kashyap, A., Ahari, A. F., Kwon, C. H., Nichol, J. W., Manoucheri, S., et al. (2012) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.1494 · Cited by 110
Engineering spatial control of multiple differentiation fates within a stem cell population
Ker, D. F. E., Chu, B., Phillippi, J. A., Gharaibeh, B., Huard, J., Weiss, L. E., & Campbell, P. G. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2011.01.036 · Cited by 108
Supporting Biomaterials for Articular Cartilage Repair
Campos, D. F. D., Drescher, W., Rath, B., Tingart, M., & Fischer, H. (2012) · Cartilage · doi:10.1177/1947603512444722 · Cited by 103
Matsuda, T., & Magoshi, T. (2002) · Biomacromolecules · doi:10.1021/bm0200229 · Cited by 94
Cell Patterning by Laser-Assisted Bioprinting
Devillard, R., Pagès, E., Correa, M. M., Kériquel, V., Rémy, M., Kalisky, J., Ali, M., Guillotin, B., & Guillemot, F. (2014) · Methods in cell biology · doi:10.1016/b978-0-12-416742-1.00009-3 · Cited by 91
Vunjak‐Novakovic, G., Bhatia, S. N., Chen, C. S., & Hirschi, K. K. (2013) · Stem Cell Research & Therapy · doi:10.1186/scrt369 · Cited by 84
Rapid Prototyping of Polyurethane for the Creation of Vascular Systems
Xu, W., Wang, X., Yan, Y., & Zhang, R. (2008) · Journal of Bioactive and Compatible Polymers · doi:10.1177/0883911507088271 · Cited by 83
Zhang, B., Ye, X., Dai, W., Hou, W., Zuo, F., & Xie, Y. (2005) · Nanotechnology · doi:10.1088/0957-4484/17/2/007 · Cited by 82
Schiele, N. R., Koppes, R. A., Corr, D. T., Ellison, K. S., Thompson, D. M., Ligon, L. A., Lippert, T. K., & Chrisey, D. B. (2008) · Applied Surface Science · doi:10.1016/j.apsusc.2008.10.054 · Cited by 81
Matrix-assisted pulsed laser methods for biofabrication
Riggs, B. C., Dias, A. D., Schiele, N. R., et al. (2011) · MRS Bulletin · doi:10.1557/mrs.2011.276 · Cited by 75
Hopp, B., Smausz, T., Szabó, G., et al. (2012) · Optical Engineering · doi:10.1117/1.oe.51.1.014302 · Cited by 68
Modeling of Bubble Expansion-Induced Cell Mechanical Profile in Laser-Assisted Cell Direct Writing
Wang, W., Li, G., & Huang, Y. H. (2009) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4000101 · Cited by 66
Cunningham, L. P., Veilleux, M. P., & Campagnola, P. J. (2006) · Optics Express · doi:10.1364/oe.14.008613 · Cited by 65
World's first patient-specific jaw implant
Nickels, L. (2012) · Metal Powder Report · doi:10.1016/s0026-0657(12)70128-5 · Cited by 55
Manufacturing and Characterization of 3‐D Hydroxyapatite Bone Tissue Engineering Scaffolds
Chu, T. G., Hollister, S. J., Halloran, J. W., Feinberg, S. E., & Orton, D. G. (2002) · Annals of the New York Academy of Sciences · doi:10.1111/j.1749-6632.2002.tb03061.x · Cited by 55
Suwanprateeb, J. (2005) · Polymer International · doi:10.1002/pi.1918 · Cited by 49
Redox Multiphoton Polymerization for 3D Nanofabrication
Kabouraki, E. A., Giakoumaki, A. N., Danilevičius, P., Gray, D. H., Vamvakaki, M., & Farsari, M. (2013) · Nano Letters · doi:10.1021/nl401853k · Cited by 49
In Vivo Conditioning of Tissue‐engineered Heart Muscle Improves Contractile Performance
Birla, R. K., Borschel, G. H., & Dennis, R. G. (2005) · Artificial Organs · doi:10.1111/j.1525-1594.2005.00148.x · Cited by 45
Bártolo, P. (2011) · Springer eBooks · doi:10.1007/978-0-387-92904-0_1 · Cited by 45
Micropatterning Electrospun Scaffolds to Create Intrinsic Vascular Networks
Jeffries, E. M., Nakamura, S., Lee, K., Clampffer, J., Ijima, H., & Wang, Y. (2014) · Macromolecular Bioscience · doi:10.1002/mabi.201400306 · Cited by 30
König, F., Hollweck, T., Pfeifer, S. A., Reichart, B., Wintermantel, E., Hagl, C. M., & Akra, B. (2012) · Journal of Functional Biomaterials · doi:10.3390/jfb3030480 · Cited by 18
Will Advances in Preclinical In Vitro Models Lower the Costs of Drug Development?
Visk, D. (2015) · Applied In Vitro Toxicology · doi:10.1089/aivt.2015.1503 · Cited by 17
Tissue engineering – an introduction
van Blitterswijk, C., Moroni, L., Rouwkema, J., Siddappa, R., & Sohier, J. (2008) · Elsevier eBooks · doi:10.1016/b978-0-12-370869-4.00024-0 · Cited by 15
Cited by
3D printing of hydrogels: Rational design strategies and emerging biomedical applications
Li, J., Wu, C., Chu, P. K., & Gelinsky, M. (2020) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100543 · Cited by 862
Current state of fabrication technologies and materials for bone tissue engineering
Wubneh, A., Tsekoura, E. K., Ayranci, C., & Uludağ, H. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.09.031 · Cited by 584
Review of alginate-based hydrogel bioprinting for application in tissue engineering
Rastogi, P., & Kandasubramanian, B. (2019) · Biofabrication · doi:10.1088/1758-5090/ab331e · Cited by 564
Recent Advances in Extrusion‐Based 3D Printing for Biomedical Applications
Placone, J. K., & Engler, A. J. (2018) · Advanced Healthcare Materials · doi:10.1002/adhm.201701161 · Cited by 486
Bioprinting for vascular and vascularized tissue biofabrication
Datta, P., Ayan, B., & Ozbolat, I. T. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.01.035 · Cited by 431
Metadata
- Authors
- Sears, N. A., Seshadri, D. R., Dhavalikar, P. S., & Cosgriff-Hernandez, E.
- Venue
- Tissue Engineering Part B: Reviews
- Publisher
- SAGE Publications
- Published
- 2016-08
- Volume
- 22
- Issue
- 4
- Pages
- 298-310
- ISSN
- 1937-3368 (ISSN-L)
- 1937-3376
- OpenAlex
- W2265139392
- Cited by
- 360
- References
- 123
- FWCI
- 20.82
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.