The DOI matches its Crossref record.
Metal Foams: A Design Guide
Abstract
11R27. Metal Foams: A Design Guide. - MF Ashby (Eng Dept, Centre for Micromech, Univ of Cambridge, Cambridge, CB2 1PZ, UK), A Evans (Princeton Mat Inst, Princeton Univ, 70 Prospect Ave, Bowen Hall, Princeton NJ 08540), NA Fleck (Eng Dept, Centre for Micromech, Univ of Cambridge, Cambridge, CB2 1PZ, UK), LJ Gibson (Dept of Mat Sci and Eng, MIT, Cambridge, MA), JW Hutchinson (Div of Eng and Appl Sci, Harvard Univ, Oxford St, Cambridge MA 02138), HNG Wadley (Dept of Mat Sci and Eng, Sch of Eng and Appl Sci, Univ of Virginia, Charlottesville VA 22903). Butterworth-Heinemann, Woburn MA. 2000. 251 pp. ISBN 0-7506-7219-6. $75.00. Reviewed by F Delale (Dept of Mech Eng, CCNY, 138th St and Convent Ave, New York NY 10031).Metal foams are a new class of materials with application potential in many areas, especially in the design of lightweight structures. The publication of this book is a timely contribution given the current interest of developing lightweight structures for defense as well as commercial applications. The book is a collaborative effort with contributions from many prominent researchers. It consists of 19 chapters, an Appendix, and an Index. It is a concise treatise in that all this material fits in 251 pages.In the first introductory chapter, metal foams are defined and their potential applications discussed. The next three chapters deal with the making of metal foams, the methods used to characterize them, and the current knowledge about their properties. The authors then proceed to discuss design formulas for simple structures made of metal foams. In the second chapter, a constitutive model for metal foams is presented. The next seven chapters discuss design with metal foams in various applications and under different loading conditions, namely: fatigue, creep, sandwich structures, packaging and blast protection, sound absorption and vibration suppression, and thermal and electrical applications. The cutting, finishing, and joining of foam metals is the subject of the ensuing chapter. In Chapter 17, several case studies are presented. Finally, the book concludes with a listing of metal foam suppliers and of websites related to the subject. As this description indicates, after a brief introduction on the behavior of metal foams, the book is totally dedicated to designing with metal foams. One distinction of this book is that it deals not only with design under mechanical loads, but also with design methodology for other types of loading conditions and phenomena, such as: fatigue, creep, thermal management, sound and vibration, blast protection, etc. The level of mathematics is intentionally kept low to cater to a wider audience. The book is geared toward the practicing engineer, and in that respect, succeeds in fulfilling that goal. Metal Foams: A Design Guide is a worthy addition to the engineering literature, and it is recommended that libraries carry a copy.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Manufacture, characterisation and application of cellular metals and metal foams
Banhart, J. (2001) · Progress in Materials Science · doi:10.1016/s0079-6425(00)00002-5 · Cited by 3,780
Silica-Like Malleable Materials from Permanent Organic Networks
Montarnal, D., Capelot, M., Tournilhac, F., & Leibler, L. (2011) · Science · doi:10.1126/science.1212648 · Cited by 3,625
The properties of foams and lattices
Ashby, M. F. (2006) · Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rsta.2005.1678 · Cited by 1,771
Self-citationEffective properties of the octet-truss lattice material
Deshpande, V. S., Fleck, N. A., & Ashby, M. F. (2001) · Journal of the Mechanics and Physics of Solids · doi:10.1016/s0022-5096(01)00010-2 · Cited by 1,741
Self-citationFoam topology: bending versus stretching dominated architectures
Deshpande, V. S., Ashby, M. F., & Fleck, N. A. (2001) · Acta Materialia · doi:10.1016/s1359-6454(00)00379-7 · Cited by 1,623
Self-citationSLM lattice structures: Properties, performance, applications and challenges
Maconachie, T., Leary, M., Lozanovski, B., Zhang, X., Qian, M., Faruque, O., & Brandt, M. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.108137 · Cited by 1,497
Mechanical metamaterials associated with stiffness, rigidity and compressibility: A brief review
Yu, X., Zhou, J., Liang, H., Jiang, Z., & Wu, L. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.12.003 · Cited by 1,140
The topological design of multifunctional cellular metals
Evans, A. G., Hutchinson, J. W., Fleck, N. A., Ashby, M. F., & Wadley, H. N. G. (2001) · Progress in Materials Science · doi:10.1016/s0079-6425(00)00016-5 · Cited by 1,134
Self-citationThe role of particles in stabilising foams and emulsions
Hunter, T. N., Pugh, R. J., Franks, G. V., & Jameson, G. J. (2008) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2007.07.007 · Cited by 1,063
Micro-architectured materials: past, present and future
Fleck, N. A., Deshpande, V. S., & Ashby, M. F. (2010) · Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rspa.2010.0215 · Cited by 982
Self-citationBiomechanics of cellular solids
Gibson, L. J. (2005) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2004.09.027 · Cited by 961
Self-citationMultifunctional periodic cellular metals
Wadley, H. N. G. (2006) · Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rsta.2005.1697 · Cited by 919
Self-citationFabrication and structural performance of periodic cellular metal sandwich structures
Wadley, H. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00266-5 · Cited by 800
Self-citationBenedetti, M., du Plessis, A., Ritchie, R. O., Dallago, M., Razavi, N., & Berto, F. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2021.100606 · Cited by 788
Maskery, I., Sturm, L., Aremu, A. O., Panesar, A., Williams, C. B., Tuck, C. J., Wildman, R. D., Ashcroft, I. A., & Hague, R. J. M. (2018) · Polymer · doi:10.1016/j.polymer.2017.11.049 · Cited by 728
Maskery, I., Aboulkhair, N. T., Aremu, A. O., Tuck, C. J., Ashcroft, I. A., Wildman, R. D., & Hague, R. J. M. (2016) · Materials Science and Engineering: A · doi:10.1016/j.msea.2016.06.013 · Cited by 706
Design and Optimization of Lattice Structures: A Review
Pan, C., Han, Y., & Lu, J. (2020) · Applied Sciences · doi:10.3390/app10186374 · Cited by 640
Murr, L. E., Gaytan, S. M., Medina, F., Lopez, H., Martinez, E., Machado, B. I., Hernandez, D. H., Martinez, L., Lopez, M. I., Wicker, R. B., et al. (2010) · Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rsta.2010.0010 · Cited by 636
Ultrastable Particle‐Stabilized Foams
Gonzenbach, U. T., Studart, A. R., Tervoort, E., & Gauckler, L. J. (2006) · Angewandte Chemie International Edition · doi:10.1002/anie.200503676 · Cited by 636
Nanolattices: An Emerging Class of Mechanical Metamaterials
Bauer, J., Meza, L. R., Schaedler, T. A., Schwaiger, R., Zheng, X., & Valdevit, L. (2017) · Advanced Materials · doi:10.1002/adma.201701850 · Cited by 592
High-strength cellular ceramic composites with 3D microarchitecture
Bauer, J., Hengsbach, S., Tesari, I., Schwaiger, R., & Kraft, O. (2014) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1315147111 · Cited by 563
Fabrication, properties and application of porous metals with directional pores
NAKAJIMA, H. (2007) · Progress in Materials Science · doi:10.1016/j.pmatsci.2006.09.001 · Cited by 561
Zhang, P., Xiao, X., & Ma, Z. W. (2016) · Applied Energy · doi:10.1016/j.apenergy.2015.12.043 · Cited by 555
Smith, M., Guan, Z., & Cantwell, W. J. (2013) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2012.12.004 · Cited by 545
Collapse of truss core sandwich beams in 3-point bending
Deshpande, V. S., & Fleck, N. A. (2001) · International Journal of Solids and Structures · doi:10.1016/s0020-7683(01)00103-2 · Cited by 532
Self-citationNazir, A., Abate, K. M., Kumar, A., & Jeng, J.-Y. (2019) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-019-04085-3 · Cited by 528
Compressive response of open-cell foams. Part I: Morphology and elastic properties
Gong, L., Kyriakides, S., & Jang, W.-Y. (2005) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2004.07.023 · Cited by 473
Beautiful and Functional: A Review of Biomimetic Design in Additive Manufacturing
du Plessis, A., Broeckhoven, C., Yadroitsava, I., Yadroitsev, I., Hands, C. H., Kunju, R., & Bhate, D. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2019.03.033 · Cited by 448
“033 A lattice structure can be approximated as an open-cell foam (as long as more than six unit cells in 1 each direction are used), with effective elastic modulus E of the lattice related to the density of the 2 structure (for the linear elastic response region) and the elastic modulus of the bulk material - solid 3…”
Mullen, L., Stamp, R. C., Brooks, W. K., Jones, E., & Sutcliffe, C. J. (2009) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.31219 · Cited by 410
Chen, D., Yang, J., & Kitipornchai, S. (2017) · Composites Science and Technology · doi:10.1016/j.compscitech.2017.02.008 · Cited by 388
Ataee, A., Li, Y., Brandt, M., & Wen, C. (2018) · Acta Materialia · doi:10.1016/j.actamat.2018.08.005 · Cited by 383
Computer-Aided Design for Additive Manufacturing of Cellular Structures
Rosen, D. W. (2007) · Computer-Aided Design and Applications · doi:10.1080/16864360.2007.10738493 · Cited by 376
The quasi-static and blast loading response of lattice structures
McKown, S., Shen, Y., Brookes, W. K., Sutcliffe, C. J., Cantwell, W. J., Langdon, G. S., Nurick, G. N., & Theobald, M. D. (2008) · International Journal of Impact Engineering · doi:10.1016/j.ijimpeng.2007.10.005 · Cited by 375
Compressive behavior of age hardenable tetrahedral lattice truss structures made from aluminium
KOOISTRA, G. (2004) · Acta Materialia · doi:10.1016/j.actamat.2004.05.039 · Cited by 375
Liu, Y. J., Wang, H. L., Li, S. J., Wang, S. G., Wang, W. J., Hou, W. T., Hao, Y. L., Yang, R., & Zhang, L. C. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.12.052 · Cited by 368
On the microstructure of open-cell foams and its effect on elastic properties
Jang, W.-Y., Kraynik, A. M., & Kyriakides, S. (2008) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2007.10.008 · Cited by 364
Yan, C., Hao, L., Hussein, A., Bubb, S. L., Young, P., & Raymont, D. (2014) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2013.12.004 · Cited by 362
Li, S. J., Xu, Q. S., Wang, Z., Hou, W. T., Hao, Y. L., Yang, R., & Murr, L. E. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.06.010 · Cited by 360
An investigation into reinforced and functionally graded lattice structures
Maskery, I., Hussey, A., Panesar, A., Aremu, A., Tuck, C., Ashcroft, I., & Hague, R. (2017) · Journal of Cellular Plastics · doi:10.1177/0021955x16639035 · Cited by 339
Manufacturing routes for metallic foams
Banhart, J. (2000) · JOM · doi:10.1007/s11837-000-0062-8 · Cited by 332
Yan, C., Hao, L., Hussein, A., Young, P., Huang, J., & Zhu, W. (2015) · Materials Science and Engineering: A · doi:10.1016/j.msea.2015.01.063 · Cited by 329
Cheng, X. Y., Li, S. J., Murr, L. E., Zhang, Z. B., Hao, Y. L., Yang, R., Medina, F., & Wicker, R. B. (2012) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2012.10.005 · Cited by 329
Cellular metal lattices with hollow trusses
Queheillalt, D. T., & Wadley, H. N. G. (2005) · Acta Materialia · doi:10.1016/j.actamat.2004.09.024 · Cited by 323
Self-citationThe effects of topology upon fluid-flow and heat-transfer within cellular copper structures
Tian, J., Kim, T., Lu, T. J., Hodson, H. P., Queheillalt, D. T., Sypeck, D. J., & Wadley, H. N. G. (2004) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2004.02.010 · Cited by 318
Self-citationVan Hooreweder, B., Apers, Y., Lietaert, K., & Kruth, J.-P. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2016.10.005 · Cited by 318
Aluminium Foam Sandwich Panels: Manufacture, Metallurgy and Applications
Banhart, J., & Seeliger, H. ‐. (2008) · Advanced Engineering Materials · doi:10.1002/adem.200800091 · Cited by 317
A comparison between different foaming methods for the synthesis of light weight geopolymers
Masi, G., Rickard, W. D. A., Vickers, L., Bignozzi, M. C., & van Riessen, A. (2014) · Ceramics International · doi:10.1016/j.ceramint.2014.05.108 · Cited by 312
Gas flow effects on selective laser melting (SLM) manufacturing performance
Ferrar, B., Mullen, L., Jones, E., Stamp, R., & Sutcliffe, C. J. (2012) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2011.09.020 · Cited by 302
Design for Additive Manufacturing of Cellular Structures
Chu, C., Graf, G., & Rosen, D. W. (2008) · Computer-Aided Design and Applications · doi:10.3722/cadaps.2008.686-696 · Cited by 300
Moon, S. K., Tan, Y. E., Hwang, J., & Yoon, Y.-J. (2014) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-014-0028-x · Cited by 299
Metal Foams: Production and Stability
Banhart, J. (2006) · Advanced Engineering Materials · doi:10.1002/adem.200600071 · Cited by 297
Trevisan, F., Calignano, F., Aversa, A., Marchese, G., Lombardi, M., Biamino, S., Ugues, D., & Manfredi, D. (2018) · Journal of Applied Biomaterials & Functional Materials · doi:10.5301/jabfm.5000371 · Cited by 295
On the performance of truss panels with Kagomé cores
Wang, J., Evans, A. G., Dharmasena, K., & Wadley, H. N. G. (2003) · International Journal of Solids and Structures · doi:10.1016/s0020-7683(03)00349-4 · Cited by 288
Self-citationMontazerian, H., Davoodi, E., Asadi-Eydivand, M., Kadkhodapour, J., & Solati-Hashjin, M. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.04.009 · Cited by 286
Zhang, X. Z., Leary, M., Tang, H. P., Song, T., & Qian, M. (2018) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2018.05.002 · Cited by 285
A Review of Metal Foam and Metal Matrix Composites for Heat Exchangers and Heat Sinks
Han, X.-H., Wang, Q., Park, Y.-G., T’Joen, C., Sommers, A., & Jacobi, A. (2012) · Heat Transfer Engineering · doi:10.1080/01457632.2012.659613 · Cited by 279
Zok, F. W., Waltner, S. A., Wei, Z., Rathbun, H. J., McMeeking, R. M., & Evans, A. G. (2004) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2004.05.045 · Cited by 275
Self-citationRhim, Y.-R., Zhang, D., Fairbrother, D. H., Wepasnick, K. A., Livi, K. J., Bodnar, R. J., & Nagle, D. C. (2010) · Carbon · doi:10.1016/j.carbon.2009.11.020 · Cited by 267
Yang, E., Leary, M., Lozanovski, B., Downing, D., Mazur, M., Sarker, A., Khorasani, A., Jones, A., Maconachie, T., Bateman, S., et al. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.108165 · Cited by 261
Jaya, N. A., Yun-Ming, L., Cheng-Yong, H., Abdullah, M. M. A. B., & Hussin, K. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.118641 · Cited by 261
Porous metal materials for polymer electrolyte membrane fuel cells – A review
Yuan, W., Tang, Y., Yang, X., & Wan, Z. (2012) · Applied Energy · doi:10.1016/j.apenergy.2012.01.073 · Cited by 261
Murr, L. E., Gaytan, S. M., Medina, F., Martinez, E., Martinez, J. L., Hernandez, D. H., Machado, B. I., Ramirez, D. A., & Wicker, R. B. (2010) · Materials Science and Engineering: A · doi:10.1016/j.msea.2009.11.015 · Cited by 258
Computational modelling of strut defects in SLM manufactured lattice structures
Lozanovski, B., Leary, M., Tran, P., Shidid, D., Qian, M., Choong, P., & Brandt, M. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.107671 · Cited by 256
Tsopanos, S., Mines, R. A. W., McKown, S., Shen, Y., Cantwell, W. J., Brooks, W., & Sutcliffe, C. J. (2010) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4001743 · Cited by 252
Valdevit, L., Jacobsen, A. J., Greer, J. R., & Carter, W. B. (2011) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2011.04599.x · Cited by 142
Metadata
- Authors
- Ashby, M., Evans, A., Fleck, N., Gibson, L., Hutchinson, J., Wadley, H., & Delale, F.
- Venue
- Applied Mechanics Reviews
- Publisher
- ASME International
- Published
- 2001-11-01
- Volume
- 54
- Issue
- 6
- Pages
- B105-B106
- ISSN
- 0003-6900 (ISSN-L)
- 2379-0407
- OpenAlex
- W2064515075
- Cited by
- 2,694
- References
- 0
- FWCI
- 222.11
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.