Initial Stages of the HCl-Induced High-Temperature Corrosion of Alloy 310
The DOI matches its Crossref record; 18 of the 19 references it cites were found in a registry or an index.
Abstract
Polished 310 stainless steel coupons were exposed isothermally in a horizontal tube furnace at 500 ° C for 1 – 168 h . The exposure gas consisted of N 2 with 5% O 2 and 500 ppm HCl(g). The corroded samples were analyzed by X-ray diffraction, focused ion beam microanalysis, scanning electron microscopy with energy-dispersive X-ray analysis, and by Auger electron spectroscopy. Mass gain was recorded. As expected, HCl(g) is a corrosion accelerator, the dominating corrosion products being Fe Cl 2 , Fe 2 O 3 , and Cr 2 O 3 . A tentative mechanism for the initial stages of the HCl-induced corrosion of stainless steel is presented.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Thermochemical Data of Pure Substances
Barin, I. (1995) · doi:10.1002/9783527619825 · Cited by 4,241
Grabke, H. J., Reese, E., & Spiegel, M. (1995) · Corrosion Science · doi:10.1016/0010-938x(95)00011-8 · Cited by 537
Zahs, A., Spiegel, M., & Grabke, H. J. (2000) · Corrosion Science · doi:10.1016/s0010-938x(99)00142-0 · Cited by 365
Zahs, A., Spiegel, M., & Grabke, H. (1999) · Materials and Corrosion · doi:10.1002/(sici)1521-4176(199910)50:10<561::aid-maco561>3.0.co;2-l · Cited by 131
Ignition of nickel in environments containing oxygen and chlorine
Lee, Y. Y., & McNallan, M. J. (1987) · Metallurgical Transactions A · doi:10.1007/bf02668559 · Cited by 107
A study of chlorine behavior in a simulated fluidized bed combustion system
Liu, K., Pan, W.-P., & Riley, J. T. (2000) · Fuel · doi:10.1016/s0016-2361(99)00247-1 · Cited by 85
Abels, J.-M., & Strehblow, H. (1997) · Corrosion Science · doi:10.1016/s0010-938x(96)00112-6 · Cited by 79
Bender, R., & Schütze, M. (2003) · Materials and Corrosion · doi:10.1002/maco.200303673 · Cited by 54
Mixed Oxidation of Iron–Chromium Alloys in Gases Containing Oxygen and Chlorine at 900 to 1200°K
Kim, A. S., & McNallan, M. J. (1990) · Corrosion · doi:10.5006/1.3585177 · Cited by 42
Corrosion Kinetics of Low- and High-Alloy Steels in Chlorine-Containing Gas Atmospheres
Haanappel, V. A. C., Haanappel, N. W. J., Fransen, T., van Corbach, H. D., & Gellings, P. J. (1992) · Corrosion · doi:10.5006/1.3315879 · Cited by 30
Research works printed but not linked: 1
- A. P. Sutton and R. W. Balluffi ,Interfaces in Crystalline Materials, Oxford Science Publications, Oxford (1995).
Cited by
Song, X., Li, X., Bai, Z., Yan, B., Li, D., & Sun, X. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.06.019 · Cited by 198
Are NaCl and KCl equally corrosive on superheater materials of steam boilers?
Enestam, S. H., Bankiewicz, D., Tuiremo, J., Mäkelä, K., & Hupa, M. M. (2012) · Fuel · doi:10.1016/j.fuel.2012.07.020 · Cited by 152
Corrosion of superheater materials in a waste-to-energy plant
Viklund, P., Hjörnhede, A., Henderson, P., Stålenheim, A., & Pettersson, R. F. A. (2011) · Fuel Processing Technology · doi:10.1016/j.fuproc.2011.06.017 · Cited by 140
Reversible Lithium‐Ion Storage in Silver‐Treated Nanoscale Hollow Porous Silicon Particles
Chen, D., Xiao, M., Ji, G., Lu, M., Xie, J., Lu, J., & Lee, J. Y. (2012) · Angewandte Chemie · doi:10.1002/ange.201107885 · Cited by 125
Jonsson, T., Folkeson, N., Svensson, J., Johansson, L.-G., & Halvarsson, M. (2011) · Corrosion Science · doi:10.1016/j.corsci.2011.03.007 · Cited by 88
Self-citationKarlsson, S., Åmand, L.-E., & Liske, J. (2015) · Fuel · doi:10.1016/j.fuel.2014.09.007 · Cited by 79
“A study of a transient in the flue gas composition of alkali chlorides (KCl + NaCl), SO2 and HCl upon starting the co-firing of SRF and sludge gives an insight into the gas phase chemistry surrounding the corrosion probe, Fig.”
BackgroundInfluentialYan, B., Li, M., Li, X., Bai, Z., Dong, L., & Li, D. (2015) · Electrochimica Acta · doi:10.1016/j.electacta.2015.02.178 · Cited by 59
Israelsson, N., Unocic, K. A., Hellström, K., Jonsson, T., Norell, M., Svensson, J.-E., & Johansson, L.-G. (2015) · Oxidation of Metals · doi:10.1007/s11085-015-9546-3 · Cited by 54
Self-citationLi, X., Liu, Z., Li, H., Wang, Y., & Bin, L. (2013) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2013.06.048 · Cited by 48
KCl-Induced Corrosion of the FeCrAl Alloy Kanthal ® AF at 600 °C and the Effect of H2O
Israelsson, N., Hellström, K., Svensson, J.-E., & Johansson, L.-G. (2015) · Oxidation of Metals · doi:10.1007/s11085-014-9506-3 · Cited by 46
Self-citationOkoro, S. C., Montgomery, M., Frandsen, F. J., & Pantleon, K. (2014) · Energy & Fuels · doi:10.1021/ef5017335 · Cited by 44
“Initiation and sustaining mechanisms for the corrosion process are still being discussed in literature [22,27,30,38,39].”
BackgroundPhother-Simon, J., Hanif, I., Liske, J., & Jonsson, T. (2021) · Corrosion Science · doi:10.1016/j.corsci.2021.109315 · Cited by 37
“Accumulations of Cl (metal chlorides) on top of GB regions has earlier been observed with TEM during the initial oxidation of a stainless steel exposed at 500 C in the presence of HCl [23].”
BackgroundInfluentialWenga, T., Macdonald, D. D., & Ma, W. (2024) · Progress in Materials Science · doi:10.1016/j.pmatsci.2024.101359 · Cited by 36
Effect of Water Vapor on High-Temperature Corrosion under Conditions Mimicking Biomass Firing
Okoro, S. C., Montgomery, M., Frandsen, F., & Pantleon, K. (2015) · Energy & Fuels · doi:10.1021/acs.energyfuels.5b01045 · Cited by 37
“Similarly, electrochemical migration of adsorbed Cl ions to the corrosion front [18,34,57] will give rise to chlorination of the most”
BackgroundWu, D., Dahl, K. V., Christiansen, T. L., Montgomery, M., & Hald, J. K. (2019) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2018.12.129 · Cited by 34
Liu, X., Duan, Y., Zheng, L., Long, L., Khalid, Z., Huang, Q., & Jiang, X. (2023) · Fuel · doi:10.1016/j.fuel.2023.129524 · Cited by 32
Jonsson, T., Folkeson, N., Halvarsson, M., Svensson, J., & Johansson, L. G. (2014) · Oxidation of Metals · doi:10.1007/s11085-013-9468-x · Cited by 33
Self-citationViklund, P., & Pettersson, R. F. A. (2010) · Oxidation of Metals · doi:10.1007/s11085-010-9227-1 · Cited by 31
Surface Modification of Silicon Anodes for Durable and HighEnergy Lithium‐Ion Batteries
Son, S., Kappes, B. B., & Ban, C. (2015) · Israel Journal of Chemistry · doi:10.1002/ijch.201400173 · Cited by 28
Okoro, S. C., Kiamehr, S., Montgomery, M., Frandsen, F. J., & Pantleon, K. (2017) · Materials and Corrosion · doi:10.1002/maco.201609173 · Cited by 27
“The corrosion attack initiated by K is intensified since HCl released from (1) can dissociate into Cl2 (reaction 2) and is transported through the porous oxide or via an electrochemical mechanism, to the bulk alloy where it chlorinates the alloying elements (M), according to reaction 3 [29,51].”
BackgroundContinuous KCl addition in high temperature exposures of 304 L – A way to mimic a boiler environment
Phother-Simon, J., Jonsson, T., & Liske, J. (2020) · Corrosion Science · doi:10.1016/j.corsci.2020.108511 · Cited by 25
Cyclic Corrosion and Chlorination of an FeCrAl Alloy in the Presence of KCl
Israelsson, N., Unocic, K. A., Hellström, K., Svensson, J. E., & Johansson, L. (2015) · Oxidation of Metals · doi:10.1007/s11085-015-9554-3 · Cited by 29
Self-citationSsenteza, V., Eklund, J., Hanif, I., Liske, J., & Jonsson, T. (2023) · Corrosion Science · doi:10.1016/j.corsci.2022.110896 · Cited by 25
Li, H., Liu, H., Huang, Y., Chen, X., Zhang, X., Li, J., Xu, L., & Yao, H. (2024) · Corrosion Science · doi:10.1016/j.corsci.2024.111933 · Cited by 26
Persdotter, A., Sattari, M., Larsson, E., Ogaz, M. A. O., Liske, J., & Jonsson, T. (2019) · Corrosion Science · doi:10.1016/j.corsci.2019.108234 · Cited by 26
Yao, W., Cui, Y., Zhan, L., Feng, C., Zhang, Y., Wang, Y., & Song, Y. L. (2017) · Applied Surface Science · doi:10.1016/j.apsusc.2017.06.031 · Cited by 22
Corrosion of furnace wall materials in waste-wood fired power plant
Alipour, Y., & Henderson, P. (2014) · Corrosion Engineering Science and Technology The International Journal of Corrosion Processes and Corrosion Control · doi:10.1179/1743278214y.0000000228 · Cited by 24
Phother-Simon, J., Hanif, I., Jonsson, T., & Liske, J. (2024) · Fuel · doi:10.1016/j.fuel.2023.130012 · Cited by 21
Bigdeli, S., Kjellqvist, L., Naraghi, R., Höglund, L., Larsson, H., & Jonsson, T. (2021) · Journal of Phase Equilibria and Diffusion · doi:10.1007/s11669-021-00893-x · Cited by 19
Proff, C., Jonsson, T., Pettersson, C., Svensson, J.-E., Johansson, L.-G., & Halvarsson, M. (2009) · Materials at High Temperatures · doi:10.1179/096034009x464339 · Cited by 19
“It was recently reported that thermodynamically metastable FeCl2 forms at the oxideyair interface when stainless steel is exposed to HCl-containing air at 500 C [27]:”
BackgroundSelf-citationCantatore, V., Olivas Ogaz, M. A., Liske, J., Jonsson, T., Svensson, J.-E., Johansson, L.-G., & Panas, I. (2019) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.9b06497 · Cited by 19
Self-citationPersdotter, A., Boll, T., & Jonsson, T. (2021) · Corrosion Science · doi:10.1016/j.corsci.2021.109779 · Cited by 16
Effect of Lead Content in Used Wood Fuel on Furnace Wall Corrosion of 16Mo3, 304L and Alloy 625
Talus, A., Norling, R., Wickström, L., & Hjörnhede, A. (2017) · Oxidation of Metals · doi:10.1007/s11085-017-9727-3 · Cited by 15
Superheater Corrosion In Biomass Boilers: Today's Science and Technology
USDOE Office of Energy Efficiency and Renewable Energy (EERE), & Sharp, W. (2010) · OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) · doi:10.2172/1048711 · Cited by 24
Okoro, S. C., Montgomery, M., Frandsen, F. J., & Pantleon, K. (2015) · Materials at High Temperatures · doi:10.1179/0960340914z.00000000081 · Cited by 14
Olivas-Ogaz, M. A., Eklund, J., Svensson, J.-E., Liske, J., & Jonsson, T. (2017) · Oxidation of Metals · doi:10.1007/s11085-017-9763-z · Cited by 13
Self-citationOgaz, M. A. O., Eklund, J., Persdotter, A., Sattari, M., Liske, J., Svensson, J., & Jonsson, T. (2018) · Oxidation of Metals · doi:10.1007/s11085-018-9881-2 · Cited by 15
Self-citationControlling the Growth of Ni3S2 Anode with Tunable Sodium Storage
Song, X., Li, X., Bai, Z., Yan, B., & Li, D. (2018) · Advanced Materials Interfaces · doi:10.1002/admi.201701684 · Cited by 16
Microstructural investigations of Ni and Ni2Al3 coatings exposed in biomass power plants
Wu, D., Dahl, K. V., Christiansen, T. L., Montgomery, M., & Hald, J. K. (2017) · Materials at High Temperatures · doi:10.1080/09603409.2017.1389382 · Cited by 13
“reaction of HCl and oxygen [13] or via reaction 1.”
BackgroundThe Influence of KCl and HCl on the High-Temperature Oxidation of a Fe-2.25Cr-1Mo Steel at 400 °C
Larsson, E., Liske, J., Persdotter, A., Jonsson, T., Svensson, J., & Johansson, L.-G. (2019) · Oxidation of Metals · doi:10.1007/s11085-019-09943-9 · Cited by 12
Self-citationSuperheater Corrosion Produced by Biomass Fuels
Sharp, W. B., Singbeil, D., & Keiser, J. R. (2012) · NACE CORROSION Conference · doi:10.5006/c2012-01308 · Cited by 11
Liu, X., Duan, Y., Chen, Q., Long, L., Lv, G., Huang, Q., & Jiang, X. (2022) · ACS Omega · doi:10.1021/acsomega.2c02722 · Cited by 9
Kaczmarczyk, R., & Gurgul, S. (2024) · Energies · doi:10.3390/en17133223 · Cited by 8
Viklund, P., Kassman, H., & Åmand, L.-E. (2014) · Materials and Corrosion · doi:10.1002/maco.201307162 · Cited by 11
KCl‐induced corrosion of Ni‐based alloys containing 35–45 wt% Cr
Malede, Y. C., Simon, J. P., Jonsson, T., Montgomery, M., Dahl, K. V., & Hald, J. (2019) · Materials and Corrosion · doi:10.1002/maco.201810658 · Cited by 8
Liu, X., Duan, Y., Zheng, L., Long, L., Khalid, Z., Huang, Q., & Jiang, X. (2023) · Journal of Material Cycles and Waste Management · doi:10.1007/s10163-023-01812-7 · Cited by 7
“It has been reported that HCl can be converted into Cl 2 in an oxidizing atmosphere, and Cl 2 can penetrate the scale/ matrix interface and react with the metal to generate metal chlorides [16, 17].”
Talus, A., Alipour, Y., Norling, R., & Henderson, P. (2016) · Materials and Corrosion · doi:10.1002/maco.201508693 · Cited by 7
Lindmark, H., Jonsson, T., & Liske, J. (2024) · Corrosion Science · doi:10.1016/j.corsci.2024.111843 · Cited by 8
Effect of High-Temperature Corrosion on the Service Life of P91 Piping in Biomass Co-firing
O’Hagan, C. P., Barrett, R. A., Leen, S. B., & Monaghan, R. F. D. (2016) · Journal of Pressure Vessel Technology · doi:10.1115/1.4032648 · Cited by 6
Improving Heat Recovery In Biomass-Fired Boilers
Keiser, J. R., USDOE Office of Energy Efficiency and Renewable Energy (EERE), Sharp, W., Singbeil, D., Singh, P., Frederick, L. A., & Meyer, J. (2013) · OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) · doi:10.2172/1093743 · Cited by 7
Ssenteza, V., Jonsson, T., Nockert, J., & Liske, J. (2024) · High Temperature Corrosion of Materials · doi:10.1007/s11085-024-10265-8 · Cited by 5
Effect of temperature on corrosion of furnace walls in a waste wood fired boiler
Alipour, Y., Henderson, P., & Szakálos, P. (2015) · Materials at High Temperatures · doi:10.1179/0960340914z.000000000100 · Cited by 5
“Low melting point or liquid chloride containing salts in the deposits are reported to accelerate the corrosion because of increased reaction kinetics and transport of ions.(30) For example potassium chloride is shown to attack the metal(31) and the presence of zinc chloride and lead chloride in an alkali chloride depo…”
BackgroundZhou, Y., Xie, G., & Zhang, J. (2025) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2025.182417 · Cited by 3
High-temperature Corrosion by Chlorides in Biomass-fired Plants
Lee, D. B. (2016) · Journal of the Korean institute of surface engineering · doi:10.5695/jkise.2016.49.1.14 · Cited by 3
“이 반응은 무척 느리지만 산화된 금속표면에서는 촉매화되며, Cl2 및 HCl에 의한 부식을 active oxidation이라고 한다[4-6].”
Hamdy, E., Pochi, A., & Geers, C. (2023) · Engineering Failure Analysis · doi:10.1016/j.engfailanal.2023.107332 · Cited by 3
Danish Experiences in Biomass Corrosion and Recent Areas of Research
Montgomery, M., Malede, Y. C., Wu, D., & Dahl, K. V. (2018) · CORROSION · doi:10.5006/2963 · Cited by 3
Corrosion of welds in biomass power plants
Montgomery, M., Dahl, K. V., & Hald, J. K. (2018) · Materials and Corrosion · doi:10.1002/maco.201810495 · Cited by 3
Ssenteza, V., Olausson, M. D. P., Eklund, J., Nockert, J., Liske, J., & Jonsson, T. (2025) · Energy & Fuels · doi:10.1021/acs.energyfuels.4c04806 · Cited by 1
Corrosion behavior of CH3Cl on 12Cr1Mo alloy from 500 °C to 700 °C
Liu, J., Chen, J., Tang, S., Gao, W., Zheng, Q., Xue, J., & Dong, C. (2024) · Fuel · doi:10.1016/j.fuel.2024.132350 · Cited by 1
Pennell, S. M., Pokharel, K., Foster, K., Vidal, J., & Rippy, K. (2026) · High Temperature Corrosion of Materials · doi:10.1007/s11085-026-10433-y · Cited by 1
Chen, T., Xiang, J., Wei, H., Bai, L., Xiong, J., Men, D., Xu, X., & Xu, X. (2021) · SSRN Electronic Journal · doi:10.2139/ssrn.3986971
Sequeira, C. A. C. (2018) · Wiley eBooks · doi:10.1002/9781119474371.ch11
Ssenteza, V., Eklund, J., Hanif, I., Liske, J., & Jonsson, T. (2022) · SSRN Electronic Journal · doi:10.2139/ssrn.4202300
Hooshyar, H., Sattari, M., Jonsson, T., Johansson, L., Svensson, J., & Liske, J. (2023) · SSRN Electronic Journal · doi:10.2139/ssrn.4514530
Self-citationvon Cossel, M., Hieber, C., Iqbal, Y., Berwanger, E., Lebendig, F., Müller, M., & Jablonowski, N. D. (2025) · Advanced Sustainable Systems · doi:10.1002/adsu.202501001
Metadata
- Authors
- Folkeson, N., Johansson, L.-G., & Svensson, J.-E.
- Affiliations
- Chalmers University of Technology (SE)
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 2007
- Volume
- 154
- Issue
- 9
- Pages
- C515
- ISSN
- 0013-4651 (ISSN-L)
- OpenAlex
- W2049585856
- Cited by
- 66
- References
- 19
- Citations by year
- 2026: 2 · 2025: 2 · 2024: 7 · 2023: 5 · 2022: 3 · 2021: 4 · 2020: 1 · 2019: 5 · 2018: 5 · 2017: 4 · 2016: 5 · 2015: 7 · 2014: 6 · 2013: 2 · 2012: 3
- FWCI
- 2.13
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Journal of The Electrochemical Society (publishedVersion)
- Chalmers Publication Library (Chalmers University of Technology) (submittedVersion)
- Chalmers Research (Chalmers University of Technology) (submittedVersion)
- Funders
- Chalmers Tekniska Högskola
- Topics
- Physical Sciences › Materials Science › Surfaces, Coatings and Films › High-Temperature Coating Behaviors
- Physical Sciences › Materials Science › Metals and Alloys › Hydrogen embrittlement and corrosion behaviors in metals
- Physical Sciences › Materials Science › Materials Chemistry › Corrosion Behavior and Inhibition
- Keywords
- high-temperature corrosion, hydrogen chloride, corrosion mechanism, corrosion products, iron chloride, iron oxide, chromium oxide, mass gain, isothermal exposure
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.