Energy harvesting for the implantable biomedical devices: issues and challenges
Open accessThe DOI matches its Crossref record; 73 of the 73 references it cites were found in a registry or an index.
Abstract
The development of implanted devices is essential because of their direct effect on the lives and safety of humanity. This paper presents the current issues and challenges related to all methods used to harvest energy for implantable biomedical devices. The advantages, disadvantages, and future trends of each method are discussed. The concept of harvesting energy from environmental sources and human body motion for implantable devices has gained a new relevance. In this review, the harvesting kinetic, electromagnetic, thermal and infrared radiant energies are discussed. Current issues and challenges related to the typical applications of these methods for energy harvesting are illustrated. Suggestions and discussion of the progress of research on implantable devices are also provided. This review is expected to increase research efforts to develop the battery-less implantable devices with reduced over hole size, low power, high efficiency, high data rate, and improved reliability and feasibility. Based on current literature, we believe that the inductive coupling link is the suitable method to be used to power the battery-less devices. Therefore, in this study, the power efficiency of the inductive coupling method is validated by MATLAB based on suggested values. By further researching and improvements, in the future the implantable and portable medical devices are expected to be free of batteries.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
CRC Handbook of Thermoelectrics
(2018) · CRC Press eBooks · doi:10.1201/9781420049718 · Cited by 5,787
Wireless Power Transfer via Strongly Coupled Magnetic Resonances
Kurs, A., Karalis, A., Moffatt, R., Joannopoulos, J. D., Fisher, P., & Soljačić, M. (2007) · Science · doi:10.1126/science.1143254 · Cited by 5,576
Energy harvesting vibration sources for microsystems applications
Beeby, S. P., Tudor, M. J., & White, N. M. (2006) · Measurement Science and Technology · doi:10.1088/0957-0233/17/12/r01 · Cited by 3,008
Rfid Handbook: Fundamentals and Applications in Contactless Smart Cards and Identification
Finkenzeller, K. (2003) · Thammasat University Digital Collections · Cited by 2,150
Energy Harvesting From Human and Machine Motion for Wireless Electronic Devices
Mitcheson, P. D., Yeatman, E. M., Rao, G. K., Holmes, A. S., & Green, T. C. (2008) · Proceedings of the IEEE · doi:10.1109/jproc.2008.927494 · Cited by 1,888
Sample, A. P., Meyer, D. A., & Smith, J. R. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2046002 · Cited by 1,808
Simple accurate expressions for planar spiral inductances
Mohan, S. S., del Mar Hershenson, M., Boyd, S. P., & Lee, T. H. (1999) · IEEE Journal of Solid-State Circuits · doi:10.1109/4.792620 · Cited by 1,627
Efficient wireless non-radiative mid-range energy transfer
Karalis, A., Joannopoulos, J. D., & Soljačić, M. (2008) · Annals of Physics · doi:10.1016/j.aop.2007.04.017 · Cited by 1,394
Energy scavenging with shoe-mounted piezoelectrics
Shenck, N. S., & Paradiso, J. A. (2001) · IEEE Micro · doi:10.1109/40.928763 · Cited by 1,091
RamRakhyani, A. K., Mirabbasi, S., & Chiao, M. (2011) · IEEE Transactions on Biomedical Circuits and Systems · doi:10.1109/tbcas.2010.2072782 · Cited by 945
Cannon, B. L., Hoburg, J. F., Stancil, D. D., & Goldstein, S. C. (2009) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2009.2017195 · Cited by 924
Human-powered wearable computing
Starner, T. (1996) · IBM Systems Journal · doi:10.1147/sj.353.0618 · Cited by 876
Vibration-to-electric energy conversion
Meninger, S., Mur-Miranda, J. O., Amirtharajah, R., Chandrakasan, A., & Lang, J. H. (2001) · IEEE Transactions on Very Large Scale Integration (VLSI) Systems · doi:10.1109/92.920820 · Cited by 867
Kinetic Energy Harvesting Using Piezoelectric and Electromagnetic Technologies—State of the Art
Khaligh, A., Zeng, P., & Zheng, C. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2024652 · Cited by 669
Wireless Implantable Microsystems: High-Density Electronic Interfaces to the Nervous System
Wise, K. D., Anderson, D. J., Hetke, J. F., Kipke, D. R., & Najafi, K. (2004) · Proceedings of the IEEE · doi:10.1109/jproc.2003.820544 · Cited by 656
Jow, U.-M., & Ghovanloo, M. (2007) · IEEE Transactions on Biomedical Circuits and Systems · doi:10.1109/tbcas.2007.913130 · Cited by 630
Self-powered signal processing using vibration-based power generation
Amirtharajah, R., & Chandrakasan, A. P. (1998) · IEEE Journal of Solid-State Circuits · doi:10.1109/4.668982 · Cited by 621
Parasitic power harvesting in shoes
Kymissis, J., Kendall, C., Paradiso, J., & Gershenfeld, N. (2002) · Digest of Papers. Second International Symposium on Wearable Computers (Cat. No.98EX215) · doi:10.1109/iswc.1998.729539 · Cited by 621
Design and Optimization of a 3-Coil Inductive Link for Efficient Wireless Power Transmission
Kiani, M., Jow, U.-M., & Ghovanloo, M. (2011) · IEEE Transactions on Biomedical Circuits and Systems · doi:10.1109/tbcas.2011.2158431 · Cited by 591
Development of an electromagnetic micro-generator
Williams, C. B., Shearwood, C., Harradine, M. A., Mellor, P. H., Birch, T. S., & Yates, R. B. (2001) · IEE Proceedings - Circuits, Devices and Systems · doi:10.1049/ip-cds:20010525 · Cited by 507
Vibration energy harvesting with aluminum nitride-based piezoelectric devices
Elfrink, R., Kamel, T. M., Goedbloed, M., Matova, S., Hohlfeld, D., van Andel, Y., & van Schaijk, R. (2009) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/19/9/094005 · Cited by 460
Maximum Achievable Efficiency in Near-Field Coupled Power-Transfer Systems
Zargham, M., & Gulak, P. G. (2012) · IEEE Transactions on Biomedical Circuits and Systems · doi:10.1109/tbcas.2011.2174794 · Cited by 349
Xue, R.-F., Cheng, K.-W., & Je, M. (2013) · IEEE Transactions on Circuits and Systems I: Regular Papers · doi:10.1109/tcsi.2012.2209297 · Cited by 340
Feedback Analysis and Design of RF Power Links for Low-Power Bionic Systems
Baker, M. W., & Sarpeshkar, R. (2007) · IEEE Transactions on Biomedical Circuits and Systems · doi:10.1109/tbcas.2007.893180 · Cited by 317
A Study of Loosely Coupled Coils for Wireless Power Transfer
Chen, C.-J., Chu, T.-H., Lin, C.-L., & Jou, Z.-C. (2010) · IEEE Transactions on Circuits and Systems II: Express Briefs · doi:10.1109/tcsii.2010.2048403 · Cited by 306
Kornbluh, R. D., Pelrine, R., Pei, Q., Heydt, R., Stanford, S., Oh, S., & Eckerle, J. (2002) · SPIE Proceedings · doi:10.1117/12.475072 · Cited by 274
A Wireless-Implantable Microsystem for Continuous Blood Glucose Monitoring
Ahmadi, M. M., & Jullien, G. A. (2009) · IEEE Transactions on Biomedical Circuits and Systems · doi:10.1109/tbcas.2009.2016844 · Cited by 266
Micromachined CMOS thermoelectric generators as on-chip power supply
Strasser, M., Aigner, R., Lauterbach, C., Sturm, T. F., Franosch, M., & Wachutka, G. (2004) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2003.11.039 · Cited by 257
Power harvesting and telemetry in CMOS for implanted devices
Sauer, C., Stanacevic, M., Cauwenberghs, G., & Thakor, N. (2005) · IEEE Transactions on Circuits and Systems I: Regular Papers · doi:10.1109/tcsi.2005.858183 · Cited by 249
Wearable devices: new ways to manage information
Billinghurst, M., & Starner, T. (1999) · Computer · doi:10.1109/2.738305 · Cited by 249
Designing Efficient Inductive Power Links for Implantable Devices
Harrison, R. R. (2007) · 2007 IEEE International Symposium on Circuits and Systems (ISCAS) · doi:10.1109/iscas.2007.378508 · Cited by 244
Inductive Powering: Basic Theory and Application to Biomedical Systems
Schuylenbergh, K. V., & Puers, R. (2009) · Medical Entomology and Zoology · Cited by 240
Fabrication, modelling and characterization of MEMS piezoelectric vibration harvesters
Renaud, M., Karakaya, K., Sterken, T., Fiorini, P., Van Hoof, C., & Puers, R. (2008) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2007.11.005 · Cited by 239
The Use of Piezoelectric Ceramics for Electric Power Generation Within Orthopedic Implants
Platt, S. R., Farritor, S., Garvin, K., & Haider, H. (2005) · IEEE/ASME Transactions on Mechatronics · doi:10.1109/tmech.2005.852482 · Cited by 232
Lee, S. B., Lee, H.-M., Kiani, M., Jow, U.-M., & Ghovanloo, M. (2010) · IEEE Transactions on Biomedical Circuits and Systems · doi:10.1109/tbcas.2010.2078814 · Cited by 220
Akin, T., Najafi, K., & Bradley, R. M. (1998) · IEEE Journal of Solid-State Circuits · doi:10.1109/4.654942 · Cited by 207
An inductive power link for a wireless endoscope
Lenaerts, B., & Puers, R. (2007) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2006.06.015 · Cited by 204
Mems inertial power generators for biomedical applications
Miao, P., Mitcheson, P. D., Holmes, A. S., Yeatman, E. M., Green, T. C., & Stark, B. H. (2006) · Microsystem Technologies · doi:10.1007/s00542-006-0152-9 · Cited by 204
Solid-State Circuits Conference
Edwards, W. J., MEINDL, J. D., & Harnwell, G. P. (1969) · Cited by 198
Thermal effects of bioimplants
Lazzi, G. (2005) · IEEE Engineering in Medicine and Biology Magazine · doi:10.1109/memb.2005.1511503 · Cited by 192
An introduction to electric circuits
(2003) · Science for Engineering · doi:10.4324/9780080474311-38 · Cited by 178
An inductive power system with integrated bi-directional data-transmission
Catrysse, M., Hermans, B., & Puers, R. (2004) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2004.02.016 · Cited by 177
TASHIRO, R., Kabei, N., Katayama, K., Tsuboi, E., & TSUCHIYA, K. (2002) · Journal of Artificial Organs · doi:10.1007/s100470200045 · Cited by 170
Energy scavenging sources for biomedical sensors
Romero, E., Warrington, R. O., & Neuman, M. R. (2009) · Physiological Measurement · doi:10.1088/0967-3334/30/9/r01 · Cited by 165
Capacitive coupling for power and data telemetry to implantable biomedical microsystems
Sodagar, A. M., & Amiri, P. (2009) · 2009 4th International IEEE/EMBS Conference on Neural Engineering · doi:10.1109/ner.2009.5109320 · Cited by 163
An implantable power supply with an optically rechargeable lithium battery
Goto, K., Nakagawa, T., Nakamura, O., & Kawata, S. (2001) · IEEE Transactions on Biomedical Engineering · doi:10.1109/10.930908 · Cited by 159
Electronic design of a cochlear implant for multichannel high-rate pulsatile stimulation strategies
Zierhofer, C. M., Hochmair-Desoyer, I. J., & Hochmair, E. S. (1995) · IEEE Transactions on Rehabilitation Engineering · doi:10.1109/86.372900 · Cited by 150
A mm-sized implantable power receiver with adaptive link compensation
O'Driscoll, S., Poon, A., & Meng, T. H. (2009) · 2009 IEEE International Solid-State Circuits Conference - Digest of Technical Papers · doi:10.1109/isscc.2009.4977424 · Cited by 144
Piezoelectric energy harvesting for bio-MEMS applications
Ramsay, M. J., & Clark, W. W. (2001) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.429684 · Cited by 143
Modulation Techniques for Biomedical Implanted Devices and Their Challenges
Hannan, M. A., Abbas, S. M., Samad, S. A., & Hussain, A. (2011) · Sensors · doi:10.3390/s120100297 · Cited by 110
Self-citationAn investigation on piezoelectric energy harvesting for MEMS power sources
Sohn, J. W., Choi, S., & Lee, D. Y. (2005) · Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science · doi:10.1243/095440605x16947 · Cited by 97
Goto, H., Sugiura, T., Harada, Y., & Kazui, T. (1999) · Medical & Biological Engineering & Computing · doi:10.1007/bf02513315 · Cited by 93
A Wireless Magnetic Resonance Energy Transfer System for Micro Implantable Medical Sensors
Li, X., Zhang, H., Peng, F., Li, Y., Yang, T., Wang, B., & Fang, D. (2012) · Sensors · doi:10.3390/s120810292 · Cited by 93
A Wireless Implantable Microsystem for Multichannel Neural Recording
Sodagar, A. M., Wise, K. D., & Najafi, K. (2009) · IEEE Transactions on Microwave Theory and Techniques · doi:10.1109/tmtt.2009.2029957 · Cited by 90
Review and Future Trend of Energy Harvesting Methods for Portable Medical Devices
Paulo, J. T., & Gaspar, P. D. (2010) · Portuguese National Funding Agency for Science, Research and Technology (RCAAP Project by FCT) · Cited by 90
A wireless near-infrared energy system for medical implants
Murakawa, K., Kobayashi, M., Nakamura, O., & Kawata, S. (1999) · IEEE Engineering in Medicine and Biology Magazine · doi:10.1109/51.805148 · Cited by 87
A 0.7-$\mu$m BiCMOS Electrostatic Energy-Harvesting System IC
Torres, E. O., & Rincón-Mora, G. A. (2010) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2009.2038431 · Cited by 87
TASHIRO, R., Kabei, N., Katayama, K., ISHIZUKA, Y., TSUBOI, F., & TSUCHIYA, K. (2000) · JSME International Journal Series C · doi:10.1299/jsmec.43.916 · Cited by 82
Design and Performance of an Optimal Inertial Power Harvester for Human-Powered Devices
Yun, J., Patel, S., Reynolds, M. S., & Abowd, G. D. (2010) · IEEE Transactions on Mobile Computing · doi:10.1109/tmc.2010.202 · Cited by 79
Infrared signal transmission by a laser-micromachined, vibration-induced power generator
Li, W. J., Ho, T., Chan, G., Leong, P. H. W., & Wong, H. Y. (2002) · IEEE International Midwest Symposium on Circuits and Systems (MWSCAS) · doi:10.1109/mwscas.2000.951628 · Cited by 78
Juanola‐Feliu, E., Colomer‐Farrarons, J., Miribel‐Català, P. L., Samitier, J., & Valls‐Pasola, J. (2011) · Technovation · doi:10.1016/j.technovation.2011.09.007 · Cited by 67
Implantable biomimetic microelectronic systems design
Liu, W., Sivaprakasam, M., Wang, G., Zhou, M., Granacki, J. J., LaCoss, J., & Wills, J. D. (2005) · IEEE Engineering in Medicine and Biology Magazine · doi:10.1109/memb.2005.1511502 · Cited by 61
Body motion for powering biomedical devices
Romero, E., Warrington, R. O., & Neuman, M. R. (2009) · 2009 Annual International Conference of the IEEE Engineering in Medicine and Biology Society · doi:10.1109/iembs.2009.5333329 · Cited by 61
New micro thermoelectric devices based on bismuth telluride-type thin solid films
Stark, I. M., & Stordeur, M. (2003) · International Conference on Thermoelectrics (ICT) · doi:10.1109/ict.1999.843432 · Cited by 52
Overview of the Modern State of the Vibration Energy Harvesting Devices
Pereyma, M. (2007) · International Conference on Perspective Technologies and Methods in MEMS Design · doi:10.1109/memstech.2007.4283437 · Cited by 49
Wireless and inductively powered implant for measuring electrocardiogram
Riistama, J. M., Väisänen, J., Heinisuo, S., Harjunpää, H., Arra, S., Kokko, K. H., Mäntylä, M., Kaihilahti, J., Heino, P., Kellomäki, M., et al. (2007) · Medical & Biological Engineering & Computing · doi:10.1007/s11517-007-0264-0 · Cited by 45
ASIC-based batteryless implantable telemetry microsystem for recording purposes
Parramon, J., Doguet, P., Marin, D., Verleyssen, M., Muñoz, R., Leija, L., & Valderrama, E. (2002) · Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC) · doi:10.1109/iembs.1997.758801 · Cited by 45
Ultrasonic Energy Transmission and Conversion Using a 2-D MEMS Resonator
Zhu, Y., Moheimani, S. O. R., & Yuce, M. R. (2010) · IEEE Electron Device Letters · doi:10.1109/led.2010.2040575 · Cited by 40
An ultrasonically-driven piezoelectric neural stimulator
Phillips, W. B., Towe, B. C., & Larson, P. J. (2004) · Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC) · doi:10.1109/iembs.2003.1279844 · Cited by 28
Power Harvesting With PZT Ceramics
Chen, H., Chen, J., Zhang, C., Wang, Z., & Liu, C.-S. (2007) · IEEE International Symposium on Circuits and Systems proceedings · doi:10.1109/iscas.2007.378694 · Cited by 22
Wireless ultrasound-powered biotelemetry for implants
Towe, B. C., Larson, P. J., & Gulick, D. W. (2009) · Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC) · doi:10.1109/iembs.2009.5333944 · Cited by 13
Inductive coupling links for lowest misalignment effects in transcutaneous implanted devices
Abbas, S. M., Hannan, M. A., Samad, S. A., & Hussain, A. (2014) · Biomedizinische Technik/Biomedical Engineering · doi:10.1515/bmt-2013-0058 · Cited by 12
Self-citationClosed loop wireless power transmission for implantable medical devices
Montes, L. A., Xue, R.-F., Cheng, K.-W., & Je, M. (2011) · International Symposium on Integrated Circuits · doi:10.1109/isicir.2011.6131982 · Cited by 8
Cited by
Biodegradable triboelectric nanogenerator as a life-time designed implantable power source
Zheng, Q., Zou, Y., Zhang, Y., Liu, Z., Shi, B., Wang, X., Jin, Y., Ouyang, H., Li, Z., & Wang, Z. L. (2016) · Science Advances · doi:10.1126/sciadv.1501478 · Cited by 617
Review of wearable thermoelectric energy harvesting: From body temperature to electronic systems
Nozariasbmarz, A., Collins, H., Dsouza, K., Polash, M. H., Hosseini, M., Hyland, M., Liu, J., Malhotra, A., Ortiz, F. M., Mohaddes, F., et al. (2020) · Applied Energy · doi:10.1016/j.apenergy.2019.114069 · Cited by 588
Fully Bioabsorbable Natural‐Materials‐Based Triboelectric Nanogenerators
Jiang, W., Li, H., Liu, Z., Li, Z., Tian, J., Shi, B., Zou, Y., Ouyang, H., Zhao, C., Zhao, L., et al. (2018) · Advanced Materials · doi:10.1002/adma.201801895 · Cited by 449
An autonomous actuator driven by fluctuations in ambient humidity
Arazoe, H., Miyajima, D., Akaike, K., Araoka, F., Sato, E., Hikima, T., Kawamoto, M., & Aida, T. (2016) · Nature Materials · doi:10.1038/nmat4693 · Cited by 435
Liu, L., Guo, X., & Lee, C. (2021) · Nano Energy · doi:10.1016/j.nanoen.2021.106304 · Cited by 402
Metadata
- Authors
- Hannan, M. A., Mutashar, S., Samad, S. A., & Hussain, A.
- Venue
- BioMedical Engineering OnLine
- Published
- 2014-06-20
- Volume
- 13
- Issue
- 1
- Pages
- 79-79
- ISSN
- 1475-925X (ISSN-L)
- OpenAlex
- W2170280734
- Cited by
- 322
- References
- 73
- FWCI
- 28.05
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.