Biodegradable synthetic polymers for tissue engineering
Open accessThe DOI matches its Crossref record; 96 of the 97 references it cites were found in a registry or an index; 1 of the 146 sources its claims cite were checked for support.
Abstract
This review focuses on biodegradable synthetic polymers, discussing synthesis, properties and biodegradability, especially within the polyester family including polylactides.
Overview
CoChat Summary
TL;DR
This review surveys biodegradable synthetic polymers for tissue engineering, emphasizing polyesters (PGA, PLA, PLGA), polylactones, poly(propylene fumarate), polyanhydrides, tyrosine-derived polycarbonates, polyorthoesters, polyurethanes, and polyphosphazenes. It concludes that polyesters dominate clinically, while injectable in situ curable systems such as PPF and photocrosslinkable polyanhydrides are promising but face challenges in biocompatibility, degradation control, and heat generation.
Key findings
- Polyesters are the most studied biodegradable polymers. PGA has 46–50% crystallinity, Tg 36°C, Tm 225°C; in Dexon sutures in vitro, first-stage degradation predominates for 21 days, crystalline degradation takes a further 28 days, and after 49 days weight loss was about 42% with complete loss of mechanical properties.
- PLA/PGA copolymer behavior depends on composition: 25–75% (l)LA/GA and 0–70% (dl)LA/GA are amorphous; 70/30 GA/LA has the highest water uptake, while 50/50 is reported as most unstable to hydrolysis; Vicryl is 8% (l)LA and 92% GA.
- Poly(caprolactone) degrades slowly: homopolymer degradation is on the order of 2–3 years, and PCL with initial average molecular weight 50,000 takes about 3 years for complete in vitro degradation.
- Poly(propylene fumarate) degrades to fumaric acid and propylene glycol; time to 20% original weight loss ranged from 84 days (PPF/β-TCP composite) to over 200 days (PPF/CaSO4 composite). PPF formulations showed maximum curing temperatures of 38–48°C versus 94°C for PMMA cements, curing times of 1–121 min, and compressive strengths of 1–12 MPa.
- Polyanhydrides degrade by surface erosion; poly(sebacic acid) degrades in about 54 days in saline, while poly(1,6-bis(p-carboxyphenoxy)hexane) is estimated at 1 year. Poly[1,6-bis(carboxyphenoxy)hexane] has a Young’s modulus of 1.3 MPa versus human bone at 40–60 MPa; poly(anhydride-co-imides) reached compressive strengths of 50–60 MPa, and photocrosslinked systems showed compressive strengths of 30–40 MPa and tensile strengths of 15–27 MPa.
- Degradable polyurethanes based on lysine diisocyanate showed varied properties: dl-lactide networks were rigid (Tg = 60°C) with ultimate tensile strengths of ~40–70 MPa, caprolactone triol networks were low-modulus elastomers with tensile strengths of 1–4 MPa, and copolymer networks had elongation up to 600% with compressive strengths of 3–25 MPa. In vivo, porous polyurethane artificial skin degraded almost completely 4–8 weeks after implantation in guinea pigs with no adverse tissue reaction.
Methods
- Design: narrative literature review; no primary experimental study or systematic review protocol is reported.
- Data/sample: published literature on biodegradable synthetic polymers, including synthesis, properties, degradation, biocompatibility, and injectable polymer systems; Tables 1–3 summarize polymer properties and precursors.
- Analysis: qualitative synthesis of major polymer classes, their degradation modes/products, mechanical properties, biocompatibility, and potential for injectable tissue-engineering compositions.
Limitations
- Stated: the paper notes that Table 2 data “should be used as a guide only” and that sufficient data are not available to provide a comprehensive list of properties for polyanhydrides, polycarbonates, polyurethanes, and polyphosphazenes.
- Stated: for polyanhydrides, no data are reported about polymer sterilizability and heat generation during polymerization; for degradable polyurethanes, the effect of degradation products and how they are removed from the body are not clearly understood.
- Evident: as a narrative review, it lacks systematic search criteria, study quality appraisal, and meta-analysis, so conclusions depend on the cited literature and may not comprehensively cover all biodegradable polymers or tissue-engineering applications.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
1 Valid · 20 Not valid · 105 Not checked · 89 Own results and interpretations
Every source the paper cites for this claim was checked and supports it.
In the paper
“A meniscal replica implanted contained only fibro-cartilage after 18 weeks and decreased the degradation of the articular cartilage.”
What the sources say
- Supportedcites De Groot et al.., 1996 source
The Aliphatic PU network passage (page not provided) reports that articular-cartilage degeneration was less severe with the prosthesis than in meniscectomized control knees. It also says the prostheses contained only fibrocartilage after 18 weeks. Degeneration was reduced, not eliminated. (LLM, conf=0.91)
plainstates a causeSingle case- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
In the paper
“The compressive strengths varied between 1 and 12 MPa”
What the sources say
- Not matchedcites Peter et al., 1998a
Couldn’t be matched to a paper in Crossref, so it can’t be checked.
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Not matched
In the paper
“Cross-linking characteristics reported for PPF, N-vinyl pyrrolidone (N-VP), benzoyl peroxide, sodium chloride, and TCP indicate that for a range of formulations, the maximum temperature varied within 38 to about 48ºC, compared to 94ºC observed for polymethylmethacrylate (PMMA) cements.”
What the sources say
- Not matchedcites Peter et al., 1998a
Couldn’t be matched to a paper in Crossref, so it can’t be checked.
hedged- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Not matched
None of the sources cited for this claim could be matched to a paper in Crossref, so there is nothing to check it against.
In the paper
“Based on in-vitro studies, the time required to reach 20% loss in original weight ranged from 84 (PPF/ß-TCP composite) to over 200 days (PPF/CaSO 4 composite)”
What the sources say
- Not matchedcites Peter et al., 1997b
Couldn’t be matched to a paper in Crossref, so it can’t be checked.
- Not matchedcites Kharas et al., 1997
Couldn’t be matched to a paper in Crossref, so it can’t be checked.
plainstates an association- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Not matched
A result the paper states — it cites no source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“These composite materials exhibit compressive strengths in the range 2 to 30 MPa.”
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
94 more claims
Create a free account to see all 215 claims and to verify the 2 references still open.
- It may state two separate claims as one. 62
- Probably not a substantial claim. 76
- The quote only partly states this claim. 1
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Advantages include a tightly controlled manufacturing process, accurate reproducibility, adjustable biodegradability, and a wide variety of both chemical and physical properties.[ 171 ]”
From Unraveling and Harnessing the Immune Response at the Cell–Biomaterial Interface for Tissue Engineering Purposes (2024) · cites this paper as [171]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated major: it would touch a result — a value a result rests on, reported and recomputed p-values on opposite sides of the significance level, two passages that conflict with no sign which is right, or a cited work retracted before this paper was published.
In the paper
§ Polyanhydrides
“Polyanhydrides degrades by surface erosion (Kohn and Langer, 1997) and their main applications are in controlled drug delivery.”
§ Conclusions
“Polyanhydride degrade by bulk erosion and their main applications are in controlled drug delivery.”
Citations
Cites
Synthetic biodegradable polymers as orthopedic devices
Middleton, J. C., & Tipton, A. J. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00101-0 · Cited by 2,741 · cited 4×
“…developments in siloxane-based polyurethanes, which have greater in-vivo stability than conventional polyetherurethanes (e.g., poly(tetramethylene oxide) (PTMO)-based) have provided opportunities for development of a range of medical implants for chronic applications (Gunatillake et al., 2001).”
BackgroundInfluentialBiomaterial developments for bone tissue engineering
Burg, K. J. L., Porter, S., & Kellam, J. F. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00102-2 · Cited by 1,643 · cited 1×
“Polyesters have also been considered for development of tissue engineering applications (Hubbell, 1995; Thomson et al 1995a, Yazemski et al. 1996; Wong and Mooney, 1997), particularly for bone tissue engineering (Kohn and Langer, 1997; Burg et al., 2000).”
BackgroundChandra, R. (1998) · Progress in Polymer Science · doi:10.1016/s0079-6700(97)00039-7 · Cited by 1,462
Biodegradable polymers for use in surgery—polyglycolic/poly(actic acid) homo- and copolymers: 1
Gilding, D. K., & Reed, A. M. (1979) · Polymer · doi:10.1016/0032-3861(79)90009-0 · Cited by 1,345
Biomaterials in Tissue Engineering
Hubbell, J. A. (1995) · Nature Biotechnology · doi:10.1038/nbt0695-565 · Cited by 1,060 · cited 1×
“Polyesters have also been considered for development of tissue engineering applications (Hubbell, 1995; Thomson et al 1995a, Yazemski et al. 1996; Wong and Mooney, 1997), particularly for bone tissue engineering (Kohn and Langer, 1997; Burg et al., 2000).”
BackgroundPolylactic Acid for Surgical Implants
KULKARNI, R. K. (1966) · Archives of Surgery · doi:10.1001/archsurg.1966.01330050143023 · Cited by 841
Evolution of bone transplantation: molecular, cellular and tissue strategies to engineer human bone
Yaszemski, M. J., Payne, R. G., Hayes, W. C., Langer, R., & Mikos, A. G. (1996) · Biomaterials · doi:10.1016/0142-9612(96)85762-0 · Cited by 729
Miller, R. A., Brady, J. M., & Cutright, D. E. (1977) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820110507 · Cited by 722 · cited 2×
“For the (l)LA/GA copolymers, resistance to hydrolysis is more pronounced at either end of the copolymers compositions range (Miller et al., 1977; Gilding and Reed, 1979; Reed and Gilding, 1981; Vert et al., 1984).”
BackgroundInjectable biodegradable materials for orthopedic tissue engineering
Temenoff, J. S., & Mikos, A. G. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00108-3 · Cited by 554 · cited 8×
“A number of methods have been reported to prepare PPF, and each results in different polymer properties (Peter et al., 1997a,b, 1999; Temenoff and Mikos 2000).”
BackgroundMethodInfluentialLeong, K. W., Brott, B. C., & Langer, R. (1985) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820190806 · Cited by 541 · cited 12×
“The polyurethanes ranged from elastomers with elongations at break as high as 780 %, but with low tensile strengths (5.8 to 8.1 MPa).”
BackgroundInfluential
Research works printed but not linked: 5
- Scranton A, Bowman C, Peiffer R, eds. ACS Symposium Series 673; American Chemical Society, Washington DC. pp 189-202.
- Ratner BD, Hoffman AS, Schoen FJ, Lemon JE, eds. Aca- demic Press, San Diego. pp 65-73.
- Lamba NMK, Woodhouse KA, Cooper SL (1998) Poly- urethanes in Biomedical Applications. CRC Press: New York p 205-241.
- Mark JE, Alcock HR, West R (1992) Inorganic Poly- mers. Prentice Hall, Upper Saddle River, NJ. Chapter
- Ng SY, Vandamme T, Tayler MS, Heller J (1997) Syn- thesis and erosion studies of self-catalysed poly(orthoester)s. Macromolecules 30: 770-772.
Cited by
Items 1,301–1,400 of 1,762
González-Henríquez, C. M., Sarabia‐Vallejos, M. A., Sanz-Horta, R., & Rodríguez‐Hernández, J. (2022) · Wiley eBooks · doi:10.1002/9783527815562.mme0040 · Cited by 4
Wound Care: A Material Solution
Hossain, M. F. (2019) · Elsevier eBooks · doi:10.1016/b978-0-12-803581-8.10997-x · Cited by 4
Wang, J., Cao, K., Chen, Z., Lyu, T., Xia, Q., Zhu, X., Liu, L., & Li, B. (2025) · Diabetes Metabolic Syndrome and Obesity · doi:10.2147/dmso.s525783 · Cited by 3
Sazhin, A., Dubrov, A. V., & Ozheredov, I. A. (2025) · Optical and Quantum Electronics · doi:10.1007/s11082-025-08507-3 · Cited by 3
“The most important characteristics of materials used to manufacture implants are biocompatibility (including non-toxicity and osseointegration), mechanical durability and corrosion resistance (Gunatillake and Adhikari 2003 ).”
Diffusion process through biodegradable polymer films
dos Santos, J. W. S., Silva, M. D. F., Concha, V. O. C., & Yoshida, C. M. P. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-818134-8.00004-3 · Cited by 3
Acute Elution of TGFβ2 Affects the Smooth Muscle Cells in a Compliance-Matched Vascular Graft
Furdella, K. J., Higuchi, S., Kim, K., Doetschman, T. C., Wagner, W. R., & Geest, J. P. V. (2022) · Tissue Engineering Part A · doi:10.1089/ten.tea.2021.0161 · Cited by 3
Torres, M., Cuba, A. H., Oberti, T. G., & Fernández, J. M. (2024) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.35493 · Cited by 4
Choi, S.-J., Lee, H., & Kim, D. (2024) · International Journal of Women s Health · doi:10.2147/ijwh.s494135 · Cited by 3
Touki, H. D., Ahmed, N. U., Motalab, M., & Bose, P. (2025) · Materials Research Express · doi:10.1088/2053-1591/adfad5 · Cited by 3
Injectable Hydrogels: From Basics to Nanotechnological Features and Potential Advances
Baroli, B. M. (2010) · NATO science for peace and security series. A, Chemistry and biology · doi:10.1007/978-90-481-8790-4_17 · Cited by 3
Biodegradable Elastomeric Polymers and MEMS in Tissue Engineering
Tran, R. T., Dey, J., Gyawali, D., Zhang, Y., & Yang, J. H. (2011) · doi:10.4032/9789814241472 · Cited by 6
Extended pulsated drug release from PLGA-based minirods
Danyuo, Y., Oberaifo, O. E., Obayemi, J. D., Dozie-Nwachukwu, S. O., Ani, C. J., Odusanya, O. S., Kana, M. G. Z., Malatesta, K. A., & Soboyejo, W. O. (2017) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-017-5866-y · Cited by 3
Synthesis, Characterization and Biodegradation of Poly(?-Methyl ?-Propiolactone)
Çatıker, E., & Uzunlar, A. (2018) · Hacettepe Journal of Biology and Chemistry · doi:10.15671/hjbc.2018.251 · Cited by 3
Dunaev, A. G., Mariyanats, A. O., Syachina, M. A., et al. (2020) · Inorganic Materials Applied Research · doi:10.1134/s2075113320030090 · Cited by 3
Früh, A. M., Rolauffs, B., & Seidenstuecker, M. (2022) · Applied Sciences · doi:10.3390/app122312280 · Cited by 3
“Besides metals and ceramics [4], plastic polymers such as Polycaprolactone (PCL) are in use as materials for the production of these three-dimensional (3D) structures [5].”
BackgroundБИОРЕЗОРБИРУЕМЫЕ КОСТНЫЕ МАТЕРИАЛЫ: СОСТОЯНИЕ В РОССИЙСКОЙ ФЕДЕРАЦИИ
Вишневского», Ф. «. Х. И. А. Н., & Губочкина, А. А. (2023) · Trace Elements in Medicine (Moscow) · doi:10.19112/2413-6174-2023-24-4-3-18 · Cited by 4
Hamidi, A. S., Hadis, M. A., Williams, R. L., Grover, L. M., & Palin, W. M. (2024) · Materials Advances · doi:10.1039/d3ma01049j · Cited by 4
Fibroblast matrix implants—a better alternative for incisional hernia repair?
Hendrawan, S., Lheman, J., Weber, U., et al. (2024) · Biomedical Materials · doi:10.1088/1748-605x/ad3da4 · Cited by 3
“The degradation time of the PLLA materials can exceed 24 months [33–35].”
BackgroundBadawy, H. A. E., Osman, A. H., Ahmed, T. A., & Hincke, M. T. (2024) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.37769 · Cited by 3
Carbon Nanotube-Polymer Nanocomposites for Biomedical Applications
Nath, N., Chakroborty, S., & Moharana, S. (2024) · Engineering materials · doi:10.1007/978-981-97-6329-0_12 · Cited by 3
Kadri, L., Salhi, S., Schuller, A., Atanase, L. I., Delaite, C., & Ammar, H. (2024) · Polymer · doi:10.1016/j.polymer.2024.127981 · Cited by 3
Allafchian, A., Mousavi, S. F., Bashari, H., Jalali, S. A. H., & Mohammadinezhad, R. (2025) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2025.141360 · Cited by 3
Coronary Arterial Drug-Eluting Stent: From Structure to Clinical
Wu, T., & McCarthy, S. (2012) · InTech eBooks · doi:10.5772/30563 · Cited by 6
A Study on Xylitol Based Copolyester for In vitro Degradation Applications
Deepa, K., & Jaisankar, V. (2018) · International Journal of ChemTech Research · doi:10.20902/ijctr.2018.110910 · Cited by 3
Polyphenol Nanoformulations with Potential Antidiabetic Properties
Hoda, M., Hemaiswarya, S., & Doble, M. (2019) · Springer eBooks · doi:10.1007/978-981-13-8997-9_6 · Cited by 3
Rashid, R., Sofi, H. S., Macossay, J., et al. (2020) · Springer eBooks · doi:10.1007/978-981-15-5622-7_2 · Cited by 3
Schuchard, K. G., Joijode, A. S., Willard, V. P., Anderson, B., Grondin, P., Pourdeyhimi, B., & Shirwaiker, R. A. (2021) · Procedia Manufacturing · doi:10.1016/j.promfg.2021.06.017 · Cited by 5
Biodegradable polymer blends and composites for biomedical applications
Yusoff, N. I. S. M., Wahit, M. U., Tham, W. H., Wong, T., Lee, X. Y., & Jamaludin, F. H. (2022) · Elsevier eBooks · doi:10.1016/b978-0-12-823791-5.00016-8 · Cited by 4
Synthesis of macromolecular brush and its thermal degradation studies
Sundari, S. S. K., Rishwana, S. S., Poornimadevi, S., et al. (2022) · International Journal of Polymer Analysis and Characterization · doi:10.1080/1023666x.2022.2029263 · Cited by 3
Nissi, J. S., Vyaishnavi, S., Sivaranjanee, R., et al. (2023) · Macromolecular Research · doi:10.1007/s13233-023-00149-2 · Cited by 3
“However, they have drawbacks such as poor biocompatibility, release of acidic degradation products, poor processability and loss of mechanical properties [26].”
BackgroundCharacterization of blended PLGA:PEG scaffolds for bone regeneration applications
Forcino, R. G. (2007) · Cited by 4
Nanostructured biomaterials for artificial tissues and organs
Chen, Y., & Webster, T. J. (2011) · Elsevier eBooks · doi:10.1533/9780857090843.2.236 · Cited by 4
Xie, D., Park, J.-G., Zhao, J., et al. (2008) · Journal of Composite Materials · doi:10.1177/0021998308092215 · Cited by 3
“Over the past twenty years, however, only a few research groups have really focused on the development of injectable synthetic degradable polymer compositions [8,9].”
BackgroundEvaluation of apatite-coated chitosan microspheres for bone regeneration
Xu, F., Yin, M., Ding, H., Song, F., Fu, D., Zhang, J., & Wang, J. (2014) · Journal of Wuhan University of Technology-Mater Sci Ed · doi:10.1007/s11595-014-0927-2 · Cited by 3
“In contrast to natural polymers, synthetic polymers generally present acidic degradation products, lack the cell recognition sites and demonstrate hydrophobicity([5]).”
BackgroundPreparation of a novel porous scaffold from poly(lacticco-glycolic acid)/hydroxyapatite
Nazarpak, M. H. (2011) · Asian Biomedicine · doi:10.5372/abm.v5i4.734 · Cited by 3
“Several requirements must be considered in the design of three-dimensional (3D) scaffolds for tissue engineering [4-6].”
BackgroundCharacterization of tissue scaffolds drug release profiles
Prabaharan, M. (2015) · Elsevier eBooks · doi:10.1016/b978-1-78242-087-3.00007-9 · Cited by 7
Medical Application of Nonwoven Fabrics - Intra-abdominal Spacers for Particle Therapy
Sasaki, R., Akasaka, H., Demizu, Y., et al. (2016) · InTech eBooks · doi:10.5772/61787 · Cited by 3
“Under physiologic conditions, PGA is also degraded by certain enzymes, especially those with esterase activity [28, 29].”
BackgroundWitkowski, J., Wnukiewicz, W., & Reichert, P. (2016) · Polymers in Medicine · doi:10.17219/pim/65053 · Cited by 3
“5 up to 100% acidic degradation products and a subsequent decrease in local pH are the cause of decreased bone regeneration [33]”
BackgroundEngebretson, B., Mussett, Z. R., Williams, C., Simmons, A. D., & Sikavitsas, V. I. (2015) · Elsevier eBooks · doi:10.1016/b978-0-12-801590-2.00012-0 · Cited by 3
Biodegradable polymers suitable for tissue engineering and drug delivery systems
Kujundziski, A. P., & Chamovska, D. (2017) · Zastita materijala · doi:10.5937/zasmat1703333p · Cited by 3
Nanostructured Materials in Tissue Engineering
Eyster, T. W., & Ma, P. X. (2018) · Springer eBooks · doi:10.1007/978-981-10-7787-6_8 · Cited by 4
Chinnasami, H., Gimble, J., & Devireddy, R. V. (2018) · Journal of Bioactive and Compatible Polymers · doi:10.1177/0883911518758354 · Cited by 4
Moradi, F., Gholipour‐Kanani, A., Najmoddin, N., Eslahi, N., Bahrami, S. H., & Rabbani, S. (2021) · Fibers and Polymers · doi:10.1007/s12221-021-0652-3 · Cited by 3
Chitosan-Based Delivery System for Tissue Regeneration and Chemotherapy
Kim, S., & Yang, Y. (2011) · Springer eBooks · doi:10.1007/978-1-4614-1080-5_12 · Cited by 3
“The biodegradable polymers have hydrolysable linkages such as ester, amide, anhydride, orthoester, urea, carbonate, and urethane linkages in their backbone [31].”
BackgroundInfluentialCurrent State of the Art in Myocardial Tissue Engineering
Giraud, M., Armbuster, C., Carrel, T. P., & Tevaearai, H. T. (2007) · Tissue Engineering · doi:10.1089/ten.2007.13.ft-351 · Cited by 3
A Brief Review on Processes for Cartilage Repair
Moura, C. S., Santos‐Rocha, R., Franco, S. C. A., Malça, C., Galhano, C., Henriques, M., & Morouço, P. (2019) · Applied Mechanics and Materials · doi:10.4028/www.scientific.net/amm.890.229 · Cited by 3
“During the curing process, it is important to have in consideration that cells and the adjacent tissues should not be damaged [45].”
BackgroundNanotissue Engineering of Skin Cells
Ramos, D. M., Subramanian, A., Aravamudhan, A., et al. (2015) · doi:10.1002/9781118540640.ch18 · Cited by 3
“Poly(l-lactide acid) (PLLA), PLGA, and PGA are among the few biodegradable polymers with Food and Drug Administration (FDA) approval for in vivo applications, thus they have been the most widely used materials for tissue-engineering scaffolds [49, 51].”
BackgroundKortsmit, J. (2009) · TU/e Research Portal · doi:10.6100/ir652161 · Cited by 3
Applications of Selected Multiphase Systems
Novák, I., Çeçen, V., & Pollák, V. (2011) · Wiley eBooks · doi:10.1002/9781119972020.ch23 · Cited by 3
Membrane supported scaffold architectures for tissue engineering
Bettahalli, N. M. S. (2011) · doi:10.3990/1.9789036531511 · Cited by 4
Literature review on impact of glycolate on the 2H evaporator and the effluent treatment facility
USDOE National Nuclear Security Administration (NNSA), N. C. S. P. (., Adu-Wusu, K., & Savannah River Site (SRS), A. (2012) · OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) · doi:10.2172/1041030 · Cited by 3
“, glycolic acid).(61,66,69-72) Hence, if polymerization were to occur, it will not be sustainable because the content in the 2H Evaporator is an aqueous solution.”
BackgroundHigh force magnetic tweezers for molecular manipulation inside living cells
Vries, D. A. H. B. (2004) · University of Twente Research Information · Cited by 6
Singh, V. (2014) · KU ScholarWorks (The University of Kansas) · Cited by 3
Three-Dimensional Printing of Porous Polylactic-Acid Scaffolds for Tissue Engineering
Singh, S., Prakash, C., & Ramakrishna, S. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-820352-1.00031-6 · Cited by 3
Tissue Engineering, Cardiovascular: Biodegradable Polymers
Liu, X., & Wang, S. (2016) · Taylor & Francis eBooks · doi:10.1081/e-ebpp-120051253 · Cited by 3
Jonnala, U. K., Sankineni, R., & Yennam, R. K. (2023) · SSRN Electronic Journal · doi:10.2139/ssrn.4479932 · Cited by 3
Overview of scaffolds processing technologies
D’Amora, U., Ronca, A., Raucci, M. G., & Ambrosio, L. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-820508-2.00002-7 · Cited by 4
Utilization of Polymers for the Development of Nanomaterials
Chandra, P., Rastogi, V., Porwal, M., Saxena, U., Verma, A. K., Fatma, N., Ali, Z., & Sachan, N. (2024) · Macromolecular Symposia · doi:10.1002/masy.202400068 · Cited by 4
Bingöl, A. B., Karakaş, C. Y., Yıldırım, M. A., İnsel, M. A., Zaman, A. C., Oktay, B., & Üstündağ, C. B. (2025) · Macromolecular Materials and Engineering · doi:10.1002/mame.202500218 · Cited by 3
“It has been extensively employed in biomedical applications, particularly in nanofibrous wound dressings, due to its biodegradability, hydrophilicity, electrospinnability, and favorable cell-interactive properties [14].”
Firoozabadi, A. A., Tafti, M. R., Nikeghbali, G., Velayati, M., Fallahzadeh, M. R., & Nabian, M. H. (2026) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbmb.70023 · Cited by 3
Hatem, S., Abdel-Gawad, R., Hussein, D. K., El‐Shiekh, R. A., & Bseiso, E. A. (2026) · Future Journal of Pharmaceutical Sciences · doi:10.1186/s43094-026-00933-8 · Cited by 3
Mishra, M. K., Akram, W., Sharma, S., & Pamu, S. (2026) · Chemistry & Biodiversity · doi:10.1002/cbdv.202503644 · Cited by 4
von Witzleben, M., Ahlfeld, T., Richter, R. F., Placht, A.-M., Greil, C., Vater, C., Hoess, A., Heinemann, S., Grom, S., Fecht, T., et al. (2026) · ACS Omega · doi:10.1021/acsomega.5c12496 · Cited by 2
Aydin, M. S., Yamada, S., Mohamed‐Ahmed, S., et al. (2026) · Materials Today Advances · doi:10.1016/j.mtadv.2026.100804 · Cited by 2
Aldawood, F. K. (2026) · Pharmaceutics · doi:10.3390/pharmaceutics18060755 · Cited by 2
“They demonstrate excellent biocompatibility, support endothelialization, and elicit minimal inflammatory response [189–191].”
Carrubba, V. L., & Brucato, V. (2018) · International Polymer Processing · doi:10.3139/217.3511 · Cited by 3
Rasyida, A. (2019) · Jurnal Teknik ITS · doi:10.12962/j23373539.v7i2.42611 · Cited by 4
Carbon Nanotubes for Cardiac Applications
Peña, B., Alegret, N., Laughter, M. R., Taylor, M. R. G., Mestroni, L., & Prato, M. (2021) · Royal Society of Chemistry eBooks · doi:10.1039/9781839161070-00223 · Cited by 2
Aesthetic Nasal Lobule Correction Using a Three-Dimensional Printed Polycaprolactone Implant
Wee, S. Y., Kim, T. H., Kang, H. Y., & Park, E. S. (2021) · Journal of Craniofacial Surgery · doi:10.1097/scs.0000000000007855 · Cited by 3
“Polycaprolactone (PCL) is 1 synthetic material that has recently garnered much attention for its biomedical applications.(9,10) Polycaprolactone-based implants have been used for over 10 years in”
BackgroundJózó, M., Várdai, R., Hegyesi, N., Móczó, J., & Pukánszky, B. (2021) · Polymers · doi:10.3390/polym13213772 · Cited by 3
“its degradation is very slow, requiring several years, PCL cannot be used as resorbable scaffold [12].”
Dermal Fillers: Understanding the Fundamentals
Samizadeh, S., & Samizadeh, S. (2022) · Springer eBooks · doi:10.1007/978-3-030-84099-0_16 · Cited by 4
Biology of Resorbable Bone Substitutes: CaP-Based and Polymers
Barbeck, M., Pissarek, J., Alkildani, S., Jung, O., & Unger, R. E. (2023) · Springer eBooks · doi:10.1007/978-3-031-37234-6_17 · Cited by 5
Functional Protein-based Biomaterials
Ali, A., Gould, M. L., & Bhowmik, S. (2024) · Royal Society of Chemistry eBooks · doi:10.1039/9781839167980-00246 · Cited by 2
Suzuki, M., Kawauchi, K., Machiyama, H., Hirata, H., Ishiwata, S., & Fujita, H. (2025) · Biotechnology and Bioengineering · doi:10.1002/bit.28996 · Cited by 2
Impact of Poly(Lactic Acid) and Graphene Oxide Nanocomposite on Cellular Viability and Proliferation
Pomini, K. T., Ferreira, J. C., da Silva, L. M. D., Totti, P. G. F., Alves, M. G., Pereira, E. D. S. B. M., Soares, M. M., Maria, D. A., & Rici, R. E. G. (2025) · Pharmaceutics · doi:10.3390/pharmaceutics17070892 · Cited by 3
“This includes biodegradability, with a degradation rate synchronous with new tissue growth, and the ability to mimic the appropriate mechanical properties within an in vivo environment, resisting physiological forces [5,6].”
Synthetic Materials: Processing and Surface Modifications for Vascular Tissue Engineering
King, W. E., Minden‐Birkenmaier, B. A., & Bowlin, G. L. (2020) · Springer eBooks · doi:10.1007/978-3-319-71530-8_2-1 · Cited by 4
Synthesis and characterization of photo-crosslinked poly(carbonate anhydrides)
van Bochove, B., & Seppälä, J. V. (2020) · eXPRESS Polymer Letters · doi:10.3144/expresspolymlett.2020.30 · Cited by 2
“Regular PCL networks, without anhydride bond, degrade very slowly [25, 26].”
BackgroundBiomaterials and its Applications in Tissue Engineering
(2016) · International Journal of Science and Research (IJSR) · doi:10.21275/v5i3.23021602 · Cited by 2
Using synthetic bioresorbable polymers for orthopedic tissue regeneration
Santoro, M., & Perale, G. (2012) · Elsevier eBooks · doi:10.1533/9780857096517.1.119 · Cited by 3
Enamul, M., & Leng, Y. (2011) · InTech eBooks · doi:10.5772/20509 · Cited by 3
Solid-phase synthesis of enantio-controlled lactic acid oligomers
Kim, S.-H., Sim, Y., Kim, B., et al. (2011) · Tetrahedron Asymmetry · doi:10.1016/j.tetasy.2011.08.021 · Cited by 2
Lee, P.-H., Cho, K., Lee, S. W., et al. (2014) · Journal of Composite Materials · doi:10.1177/0021998314554121 · Cited by 2
Potential of engineering methodologies for the application to pharmaceutical research
Shin, J. W., Park, S. H., Kang, Y. G., & Shin, J. (2012) · Archives of Pharmacal Research · doi:10.1007/s12272-012-0209-5 · Cited by 3
“The cell-containing scaffold replaces the damaged tissue and sometimes the scaffold is composed of biodegradable materials (Gunatillake and Adhikari, 2003; Engineer et al., 2011).”
BackgroundRoss, S., Mahasaranon, S., & Ross, G. M. (2015) · Macromolecular Symposia · doi:10.1002/masy.201400112 · Cited by 2
Controlled Release of Drugs for Management of Pulpitis
Jaberi-Ansari, Z., Ekrami, M., & Nojehdehian, H. (2014) · Avicenna journal of dental research · doi:10.17795/ajdr-21610 · Cited by 2
“On the other hand, the behavior and the degradability of PLGA are controllable, which is the main advantage of this polymer and the reason for its vast application in medical and dental fields (13-15).”
BackgroundPerspective on biomaterials used in the surgical treatment of morbid obesity
Henry, J. A., & Pandit, A. S. (2009) · Obesity Reviews · doi:10.1111/j.1467-789x.2008.00551.x · Cited by 2
“The PHB polymers typically have degradation rates greater than 12 months (59).”
BackgroundShah, M. K. (2008) · OhioLink ETD Center (Ohio Library and Information Network) · Cited by 2
Synthesis, Processing and Characterization of Ceramic Nanobiomaterials for Biomedical Applications
Schulz‐Siegmund, M., Hötzel, R., Hoffmeister, P.-G., & Hacker, M. C. (2011) · CRC Press eBooks · doi:10.1201/b10970-4 · Cited by 3
Nanocomposites for Bone Repair
Kwon, K., Shepherd, J. H., Shepherd, D. V., Moreno-Gomez, I., & Best, S. M. (2016) · WORLD SCIENTIFIC (EUROPE) eBooks · doi:10.1142/9781786341341_0009 · Cited by 2
Macroporous Polymer Scaffolds Through Leaching Processes
Hacker, M. C., Ambrosch, K., & Schulz‐Siegmund, M. (2009) · CRC Press eBooks · doi:10.1201/9781420084627-c3 · Cited by 3
Tissue Engineering and Artificial Organ
Gupta, V., Sengupta, M., Prakash, J., & Tripathy, B. C. (2016) · Springer eBooks · doi:10.1007/978-981-10-0875-7_21 · Cited by 3
3D-Printed Artificial Meniscus
Nakagawa, Y., Fortier, L. A., Mao, J. J., et al. (2017) · Springer eBooks · doi:10.1007/978-3-662-54181-4_33 · Cited by 2
How Did Bioactive Glasses Revolutionize Medical Science? A Tribute to Larry Hench
Kaur, G., Mauro, J. C., Kumar, V. R., Pickrell, G., & Baino, F. (2017) · Springer eBooks · doi:10.1007/978-3-319-56059-5_1 · Cited by 4
Oral nerve tissue repair and regeneration
Jazayeri, H. E., Fahimipour, F., Tahriri, M., Almeida, L. E., & Tayebi, L. (2017) · Elsevier eBooks · doi:10.1016/b978-0-08-100961-1.00019-0 · Cited by 4
Economical Lactic Acid Production and Optimization Strategies
Bhatt, S. M. (2018) · Fungal biology · doi:10.1007/978-3-319-90379-8_5 · Cited by 2
Isa, R. M., Mariatti, M., Ahmad, Z., et al. (2018) · Journal of Physics Conference Series · doi:10.1088/1742-6596/1082/1/012073 · Cited by 2
Synthesis, Characterization and Hydrolytic Degradation of p-Cresol-Substituted Polyphosphazenes
Shahzady, T. G., Khurshid, S., Abid, A., Ali, Z., Razzaque, S., Rehman, H., Zahra, A., Hussain, S., & Waqas, M. (2019) · Arabian Journal for Science and Engineering · doi:10.1007/s13369-019-03952-1 · Cited by 2
Application of New Biomedical Materials in Orthodontic Appliances
Mahmood, H. T., Kamal, A. T., Khan, B., & Fida, M. (2019) · Journal of College of Physicians And Surgeons Pakistan · doi:10.29271/jcpsp.2019.07.654 · Cited by 4
Biodegradable Composite Scaffold for Bone Tissue Regeneration
Bag, S. (2019) · Springer eBooks · doi:10.1007/978-981-13-3705-5_27 · Cited by 3
Budianto, E., & Dhafiningtia, R. (2020) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/763/1/012021 · Cited by 2
Metadata
- Authors
- CSIRO Molecular Science, B. 1., & Gunatillake, P.
- Corresponding author
- CSIRO Molecular Science, Bag 10, Clayton South MDC, Vic 3169, Australia
- Venue
- European Cells and Materials
- Publisher
- Forum Multimedia Publishing LLC
- Published
- 2003-10-01
- Volume
- 5
- Pages
- 1-16
- ISSN
- 1473-2262 (ISSN-L)
- OpenAlex
- W2106035984
- Cited by
- 1,765
- References
- 97
- Citations by year
- 2026: 43 · 2025: 61 · 2024: 59 · 2023: 80 · 2022: 90 · 2021: 112 · 2020: 102 · 2019: 115 · 2018: 105 · 2017: 128 · 2016: 110 · 2015: 106 · 2014: 110 · 2013: 91 · 2012: 86
- FWCI
- 1.32
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- cc-by
- Locations
- European Cells and Materials (publishedVersion, cc-by)
- PubMed (publishedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Engineering › Biomedical Engineering › Bone Tissue Engineering Materials
- Health Sciences › Medicine › Surgery › Surgical Sutures and Adhesives
- Keywords
- tissue engineering, polyesters, polyglycolic acid, polylactic acid, polyanhydrides, polyphosphazenes, polyurethane, poly(propylene fumarate), injectable polymers, orthopedic tissue engineering, biodegradation, biocompatibility, degradation products
- MeSH terms
- Biocompatible Materials, Models, Chemical, Polymers, Tissue Engineering
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.