Biodegradable synthetic polymers for tissue engineering
Open accessThe DOI matches its Crossref record; 96 of the 97 references it cites were found in a registry or an index; 1 of the 146 sources its claims cite were checked for support.
Abstract
This review focuses on biodegradable synthetic polymers, discussing synthesis, properties and biodegradability, especially within the polyester family including polylactides.
Overview
CoChat Summary
TL;DR
This review surveys biodegradable synthetic polymers for tissue engineering, emphasizing polyesters (PGA, PLA, PLGA), polylactones, poly(propylene fumarate), polyanhydrides, tyrosine-derived polycarbonates, polyorthoesters, polyurethanes, and polyphosphazenes. It concludes that polyesters dominate clinically, while injectable in situ curable systems such as PPF and photocrosslinkable polyanhydrides are promising but face challenges in biocompatibility, degradation control, and heat generation.
Key findings
- Polyesters are the most studied biodegradable polymers. PGA has 46–50% crystallinity, Tg 36°C, Tm 225°C; in Dexon sutures in vitro, first-stage degradation predominates for 21 days, crystalline degradation takes a further 28 days, and after 49 days weight loss was about 42% with complete loss of mechanical properties.
- PLA/PGA copolymer behavior depends on composition: 25–75% (l)LA/GA and 0–70% (dl)LA/GA are amorphous; 70/30 GA/LA has the highest water uptake, while 50/50 is reported as most unstable to hydrolysis; Vicryl is 8% (l)LA and 92% GA.
- Poly(caprolactone) degrades slowly: homopolymer degradation is on the order of 2–3 years, and PCL with initial average molecular weight 50,000 takes about 3 years for complete in vitro degradation.
- Poly(propylene fumarate) degrades to fumaric acid and propylene glycol; time to 20% original weight loss ranged from 84 days (PPF/β-TCP composite) to over 200 days (PPF/CaSO4 composite). PPF formulations showed maximum curing temperatures of 38–48°C versus 94°C for PMMA cements, curing times of 1–121 min, and compressive strengths of 1–12 MPa.
- Polyanhydrides degrade by surface erosion; poly(sebacic acid) degrades in about 54 days in saline, while poly(1,6-bis(p-carboxyphenoxy)hexane) is estimated at 1 year. Poly[1,6-bis(carboxyphenoxy)hexane] has a Young’s modulus of 1.3 MPa versus human bone at 40–60 MPa; poly(anhydride-co-imides) reached compressive strengths of 50–60 MPa, and photocrosslinked systems showed compressive strengths of 30–40 MPa and tensile strengths of 15–27 MPa.
- Degradable polyurethanes based on lysine diisocyanate showed varied properties: dl-lactide networks were rigid (Tg = 60°C) with ultimate tensile strengths of ~40–70 MPa, caprolactone triol networks were low-modulus elastomers with tensile strengths of 1–4 MPa, and copolymer networks had elongation up to 600% with compressive strengths of 3–25 MPa. In vivo, porous polyurethane artificial skin degraded almost completely 4–8 weeks after implantation in guinea pigs with no adverse tissue reaction.
Methods
- Design: narrative literature review; no primary experimental study or systematic review protocol is reported.
- Data/sample: published literature on biodegradable synthetic polymers, including synthesis, properties, degradation, biocompatibility, and injectable polymer systems; Tables 1–3 summarize polymer properties and precursors.
- Analysis: qualitative synthesis of major polymer classes, their degradation modes/products, mechanical properties, biocompatibility, and potential for injectable tissue-engineering compositions.
Limitations
- Stated: the paper notes that Table 2 data “should be used as a guide only” and that sufficient data are not available to provide a comprehensive list of properties for polyanhydrides, polycarbonates, polyurethanes, and polyphosphazenes.
- Stated: for polyanhydrides, no data are reported about polymer sterilizability and heat generation during polymerization; for degradable polyurethanes, the effect of degradation products and how they are removed from the body are not clearly understood.
- Evident: as a narrative review, it lacks systematic search criteria, study quality appraisal, and meta-analysis, so conclusions depend on the cited literature and may not comprehensively cover all biodegradable polymers or tissue-engineering applications.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
1 Valid · 20 Not valid · 105 Not checked · 89 Own results and interpretations
Every source the paper cites for this claim was checked and supports it.
In the paper
“A meniscal replica implanted contained only fibro-cartilage after 18 weeks and decreased the degradation of the articular cartilage.”
What the sources say
- Supportedcites De Groot et al.., 1996 source
The Aliphatic PU network passage (page not provided) reports that articular-cartilage degeneration was less severe with the prosthesis than in meniscectomized control knees. It also says the prostheses contained only fibrocartilage after 18 weeks. Degeneration was reduced, not eliminated. (LLM, conf=0.91)
plainstates a causeSingle case- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
In the paper
“The compressive strengths varied between 1 and 12 MPa”
What the sources say
- Not matchedcites Peter et al., 1998a
Couldn’t be matched to a paper in Crossref, so it can’t be checked.
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Not matched
In the paper
“Cross-linking characteristics reported for PPF, N-vinyl pyrrolidone (N-VP), benzoyl peroxide, sodium chloride, and TCP indicate that for a range of formulations, the maximum temperature varied within 38 to about 48ºC, compared to 94ºC observed for polymethylmethacrylate (PMMA) cements.”
What the sources say
- Not matchedcites Peter et al., 1998a
Couldn’t be matched to a paper in Crossref, so it can’t be checked.
hedged- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Not matched
None of the sources cited for this claim could be matched to a paper in Crossref, so there is nothing to check it against.
In the paper
“Based on in-vitro studies, the time required to reach 20% loss in original weight ranged from 84 (PPF/ß-TCP composite) to over 200 days (PPF/CaSO 4 composite)”
What the sources say
- Not matchedcites Peter et al., 1997b
Couldn’t be matched to a paper in Crossref, so it can’t be checked.
- Not matchedcites Kharas et al., 1997
Couldn’t be matched to a paper in Crossref, so it can’t be checked.
plainstates an association- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Not matched
A result the paper states — it cites no source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“These composite materials exhibit compressive strengths in the range 2 to 30 MPa.”
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
94 more claims
Create a free account to see all 215 claims and to verify the 2 references still open.
- It may state two separate claims as one. 62
- Probably not a substantial claim. 76
- The quote only partly states this claim. 1
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Advantages include a tightly controlled manufacturing process, accurate reproducibility, adjustable biodegradability, and a wide variety of both chemical and physical properties.[ 171 ]”
From Unraveling and Harnessing the Immune Response at the Cell–Biomaterial Interface for Tissue Engineering Purposes (2024) · cites this paper as [171]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated major: it would touch a result — a value a result rests on, reported and recomputed p-values on opposite sides of the significance level, two passages that conflict with no sign which is right, or a cited work retracted before this paper was published.
In the paper
§ Polyanhydrides
“Polyanhydrides degrades by surface erosion (Kohn and Langer, 1997) and their main applications are in controlled drug delivery.”
§ Conclusions
“Polyanhydride degrade by bulk erosion and their main applications are in controlled drug delivery.”
Citations
Cites
Synthetic biodegradable polymers as orthopedic devices
Middleton, J. C., & Tipton, A. J. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00101-0 · Cited by 2,741 · cited 4×
“…developments in siloxane-based polyurethanes, which have greater in-vivo stability than conventional polyetherurethanes (e.g., poly(tetramethylene oxide) (PTMO)-based) have provided opportunities for development of a range of medical implants for chronic applications (Gunatillake et al., 2001).”
BackgroundInfluentialBiomaterial developments for bone tissue engineering
Burg, K. J. L., Porter, S., & Kellam, J. F. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00102-2 · Cited by 1,643 · cited 1×
“Polyesters have also been considered for development of tissue engineering applications (Hubbell, 1995; Thomson et al 1995a, Yazemski et al. 1996; Wong and Mooney, 1997), particularly for bone tissue engineering (Kohn and Langer, 1997; Burg et al., 2000).”
BackgroundChandra, R. (1998) · Progress in Polymer Science · doi:10.1016/s0079-6700(97)00039-7 · Cited by 1,462
Biodegradable polymers for use in surgery—polyglycolic/poly(actic acid) homo- and copolymers: 1
Gilding, D. K., & Reed, A. M. (1979) · Polymer · doi:10.1016/0032-3861(79)90009-0 · Cited by 1,345
Biomaterials in Tissue Engineering
Hubbell, J. A. (1995) · Nature Biotechnology · doi:10.1038/nbt0695-565 · Cited by 1,060 · cited 1×
“Polyesters have also been considered for development of tissue engineering applications (Hubbell, 1995; Thomson et al 1995a, Yazemski et al. 1996; Wong and Mooney, 1997), particularly for bone tissue engineering (Kohn and Langer, 1997; Burg et al., 2000).”
BackgroundPolylactic Acid for Surgical Implants
KULKARNI, R. K. (1966) · Archives of Surgery · doi:10.1001/archsurg.1966.01330050143023 · Cited by 841
Evolution of bone transplantation: molecular, cellular and tissue strategies to engineer human bone
Yaszemski, M. J., Payne, R. G., Hayes, W. C., Langer, R., & Mikos, A. G. (1996) · Biomaterials · doi:10.1016/0142-9612(96)85762-0 · Cited by 729
Miller, R. A., Brady, J. M., & Cutright, D. E. (1977) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820110507 · Cited by 722 · cited 2×
“For the (l)LA/GA copolymers, resistance to hydrolysis is more pronounced at either end of the copolymers compositions range (Miller et al., 1977; Gilding and Reed, 1979; Reed and Gilding, 1981; Vert et al., 1984).”
BackgroundInjectable biodegradable materials for orthopedic tissue engineering
Temenoff, J. S., & Mikos, A. G. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00108-3 · Cited by 554 · cited 8×
“A number of methods have been reported to prepare PPF, and each results in different polymer properties (Peter et al., 1997a,b, 1999; Temenoff and Mikos 2000).”
BackgroundMethodInfluentialLeong, K. W., Brott, B. C., & Langer, R. (1985) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820190806 · Cited by 541 · cited 12×
“The polyurethanes ranged from elastomers with elongations at break as high as 780 %, but with low tensile strengths (5.8 to 8.1 MPa).”
BackgroundInfluential
Research works printed but not linked: 5
- Scranton A, Bowman C, Peiffer R, eds. ACS Symposium Series 673; American Chemical Society, Washington DC. pp 189-202.
- Ratner BD, Hoffman AS, Schoen FJ, Lemon JE, eds. Aca- demic Press, San Diego. pp 65-73.
- Lamba NMK, Woodhouse KA, Cooper SL (1998) Poly- urethanes in Biomedical Applications. CRC Press: New York p 205-241.
- Mark JE, Alcock HR, West R (1992) Inorganic Poly- mers. Prentice Hall, Upper Saddle River, NJ. Chapter
- Ng SY, Vandamme T, Tayler MS, Heller J (1997) Syn- thesis and erosion studies of self-catalysed poly(orthoester)s. Macromolecules 30: 770-772.
Cited by
Items 1,601–1,700 of 1,762
Bone Tissue Engineering: Synthetic and Natural Polymers and Composites of
Mishra, R., & Kumar, A. (2015) · Taylor & Francis eBooks · doi:10.1081/e-ebpp-120050565
Junaidi, D. A. S., & Budianto, E. (2018) · AIP conference proceedings · doi:10.1063/1.5082451
Sharma, S. (2016) · Swinburne figshare (Swinburne University of Technology) · doi:10.25916/sut.26286982
Bioresorbable Composites and Implant
Zindani, D. (2019) · Advances in mechatronics and mechanical engineering (AMME) book series · doi:10.4018/978-1-5225-8235-9.ch003
Fabricação de scaffolds de polímero reforçado para aplicação na bioengenharia tecidual
Barbosa, T. V. (2019) · Digital Library of Theses and Dissertations (Universidade de São Paulo) · doi:10.11606/d.18.2019.tde-14022019-084241 · Cited by 1
BIORESORABLE TUBULAR MATRIXS RECEIVED BY ELECTROSPINNING FROM POLY(L-LAKTIDA) IN RAT MUSCULAR TISSUE
Popryadukhin, P. V., Popov, G. I., Yukina, G. Y., Dobrovol’skaya, I. P., Ivan’kova, E. M., & Yudin, V. E. (2018) · International Journal of Applied and Fundamental Research (Международный журнал прикладных и фундаментальных исследований) · doi:10.17513/mjpfi.12459
Armentano, I., Torre, L., & Kenny, J. M. (2017) · CRC Press eBooks · doi:10.1081/e-ebppc-120053753
Sprayable thermoresponsive hydrogels for minimally invasive treatment of bowel diseases
Pehlivaner (2018) · Digital Repository Service (Northeastern University) · doi:10.17760/d20292459
“regeneration (skin, cartilage, bone, vascular, nerve and liver) [54, 55], implants [56], surgical devices [57], biosensors [58], drug delivery [59], carriers of immobilized enzymes and cells [60].”
BackgroundChan, J. P. Y. (2018) · TSpace (University of Toronto) · Cited by 1
Composite Scaffolds of Natural and Synthetic Polymers for Bladder Tissue Engineering
Lawrence, B. (2006) · SHAREOK (University of Oklahoma; Oklahoma State University; Central Oklahoma University) · Cited by 1
Phenolic and epoxy-based copolymers and terpolymers
Chundawat, N. S., Rathore, B. S., & Meghwal, K. (2019) · Elsevier eBooks · doi:10.1016/b978-0-12-816349-8.00008-4
Tissue Engineering of Skeletal Muscle
(2008) · CRC Press eBooks · doi:10.1081/e-ebbe2-120005550
Hydrogen peroxide/UV treatment on polylactide/polyurethane blends for biomedical applications
Bednarz, P. (2017) · Science Technology and Innovation · doi:10.5604/01.3001.0010.7552
Roca, E. T. (2019) · RiuNet (Universitat Politècnica de València) · doi:10.4995/thesis/10251/125709 · Cited by 1
de Carvalho, L. T. (2019) · Digital Library of Theses and Dissertations (Universidade de São Paulo) · doi:10.11606/d.97.2019.tde-28112019-170913
Elastomers: Biodegradable Thermoplastic
Lipik, V. T., Widjaja, L. K., Fong, K. J., & Venkatraman, S. S. (2016) · Taylor & Francis eBooks · doi:10.1081/e-ebpp-120049998
Cellular Mechanisms of Bioresorption of a Porous 3D Matrix Based on Chitosan
Popryadukhin, P. V., Yukina, G. Y., Dobrovol’skaya, I. P., Ivan’kova, E. M., & Yudin, V. E. (2019) · Cell and Tissue Biology · doi:10.1134/s1990519x19060087
“…necessary level of mechanical properties to manipulate with these materials in biological liquid media, and (4) bioresorbtion with decomposition products not being irritating or toxic for the organism (Dornish et al., 2001; Gunatillake and Adhikari, 2003; Salgado et al., 2004; Reis et al., 2008).”
BackgroundElectrospun fibers and nanoparticles for the prevention of sexually transmitted infections.
Tyo, K. M. (2019) · ThinkIR: The University of Louisville's Institutional Repository (University of Louisville) · doi:10.18297/etd/3344
Schachtner, J. T., & Kurtz, S. M. (2018) · iDEA - Drexel University Institutional Repository · doi:10.17918/etd-7975
Ryofi, A. N., & Budianto, E. (2020) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/763/1/012028
Zilvania, F., & Budianto, E. (2020) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/763/1/012045
Skeletal muscle tissue engineering
Klumpp, D., Horch, R. E., & Beier, J. P. (2014) · Elsevier eBooks · doi:10.1533/9780857097163.3.524 · Cited by 1
In vivo models for biomaterials: applications from cardiovascular tissue engineering
Boktor, J. C., Abdollahi, S., Ong, C. S., & Hibino, N. (2020) · Elsevier eBooks · doi:10.1016/b978-0-08-102967-1.00011-6 · Cited by 1
Ribeiro, J. P. L. D., Astudillo-Ortiz, E. A., Babo, P. S., & Gomes, M. E. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-818128-7.00028-9
Investigating Mechanical Properties of PGLA Fibres as a Function of Degradation Time
Singh, A., & Guedes, R. M. (2020) · Procedia Structural Integrity · doi:10.1016/j.prostr.2020.11.050
Systemic Delivery in Anti-aging Medicine: An Overview
Wang, Y., & Lai, W. (2020) · Healthy ageing and longevity · doi:10.1007/978-3-030-54490-4_1 · Cited by 1
Torres, M. L. (2020) · El Servicio de Difusión de la Creación Intelectual (National University of La Plata) · doi:10.35537/10915/98347
Influence of Chitosan-Alginate Scaffold Stiffness on Bone Marrow Stromal Cell Differentiation
Ponce, I. A. (2018) · Journal of International Crisis and Risk Communication Research
BONE TISSUE ENGINEERING FOR CORRECTING OF CLEFT PALATE DURING ORAL AND MAXILLOFACIAL SURGERY
Qassim, D. A. (2021) · White Rose eTheses Online (University of Leeds, The University of Sheffield, University of York) · Cited by 1
[Dietary habits and oral health indices in a group of public school children].
Margiotta, V., Giuliana, G., & Giannettino, G. M. (1988) · PubMed
Induced pluripotent stem cells for trachea engineering
Zhou, Q., & Saijo, Y. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-823809-7.00007-4
Safety and health issues of biocomposites
Biswas, M. C., Nandy, P. K., & Hoque, M. E. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-821553-1.00003-x · Cited by 1
Switching to Bioplastics for Sustaining our Environment
Priyanka, P., Yadav, D., & Dutta, J. (2021) · Environmental chemistry for a sustainable world · doi:10.1007/978-3-030-77795-1_1
Rani, V., Venkatesan, J., & Prabhu, A. (2021) · Springer eBooks · doi:10.1007/978-981-16-4420-7_2
Cutting-edge polymer/graphene nanocomposites for biomedical applications
Kausar, A. (2021) · Elsevier eBooks · doi:10.1016/b978-0-323-90937-2.00011-3
SHIBRYAEVA, L. S., Blinov, N. D., Lyusova, L. R., & Naumova, Y. A. (2022) · Polymer Science Series B · doi:10.1134/s156009042202004x
Bone as a Material: Lessons From Nature
O’Sullivan, L., & McNamara, L. M. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-803581-8.12099-5
Zezyk, C. (2022) · Publication Server of Goethe University Frankfurt am Main (Goethe University Frankfurt) · doi:10.21248/gups.65248
Jagur‐Grodzinski, J. (2008) · Wiley eBooks · doi:10.1002/0471238961.tissjagu.a01
Bioplastics Used for Controlled Drug Delivery
Rajakumari, R., Thomas, S., & Kalarikkal, N. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-820352-1.00133-4
(2004) · CRC Press eBooks · doi:10.1201/9781420039665.fmatt
(2015) · CRC Press eBooks · doi:10.1201/b18932-16
Becker, T. M., Breithaupt, D. E., Doelle, H. W., Fiechter, A., van Griensven, M., Kasper, C., Lütz, S., Pörtner, R., Schlegel, H., Sell, D., et al. (2007) · Ullmann's Encyclopedia of Industrial Chemistry · doi:10.1002/14356007.a04_107.pub2 · Cited by 2
Rahman, M., & Hasan, M. R. (2018) · Polymers and polymeric composites · doi:10.1007/978-3-319-92066-5_1-1 · Cited by 3
Boven, J. M. (2018) · eDiss (Georg-August-Universität Göttingen) · doi:10.53846/goediss-6891
Langat, E. K., & Njuguna, D. G. (2022) · CRC Press eBooks · doi:10.1201/9781003221968-14
Delewi, R., & de Winter, R. J. (2022) · Interventional Cardiology · doi:10.1002/9781119697367.ch34
Evolving Concepts for Use of Stem Cells and Tissue Engineering for Cardiac Regeneration
Jahnavi, S., Santhakumar, R., & Verma, R. S. (2019) · IGI Global eBooks · doi:10.4018/978-1-5225-8185-7.ch024
(2012) · Elsevier eBooks · doi:10.1016/b978-0-323-08108-5.10016-7
Hsu, E., Alvarez, P. J. J., Schutte, L., Donovan, A., Liu, S., Shivats, A. R., & Hollinger, J. O. (2014) · Cambridge University Press eBooks · doi:10.1017/cbo9780511997839.031
Scaffolds, Polymeric: Tissue Engineering
Yoon, D. M., & Fisher, J. P. (2016) · Taylor & Francis eBooks · doi:10.1081/e-ebpp-120052180
Natural Fiber Composites in Biomedical and Bioengineering Applications
Cheung, K. (2010) · CRC Press eBooks · doi:10.1201/b10462-7 · Cited by 1
Bioresorbable Composites and Implant
Zindani, D. (2021) · IGI Global eBooks · doi:10.4018/978-1-7998-8050-9.ch022
Multifunctional Nanocomposites for Biotherapeutic Applications
Souto, E. B., Fernandes, A. R., Dias-Ferreira, J., da Silva, C. F., Severino, P. B., Martins‐Gomes, C., & Silva, A. M. (2021) · IGI Global eBooks · doi:10.4018/978-1-7998-8591-7.ch060
Order from Disorder with Intrinsically Disordered Peptide AmphiphilesPreprint
Jacoby, G., Asher, M. S., Ehm, T., et al. (2021) · ChemRxiv · doi:10.26434/chemrxiv.14236886
Gravel, M., Vago, R., & Tabrizian, M. (2006) · Tissue Engineering · doi:10.1089/ten.2006.12.ft-43
Microfabrication of polymers for bioMEMS
Rezai, P., Wu, W.-I., & Selvaganapathy, P. R. (2012) · Woodhead Publishing Limited eBooks · doi:10.1533/9780857096272.1.1 · Cited by 1
Martinez-Hernandez, R. C. (2018) · doi:10.24275/uami.0c483j43w · Cited by 1
Tyo, K. M. (2016) · ThinkIR: The University of Louisville's Institutional Repository (University of Louisville) · doi:10.18297/etd/2486
“Furthermore, due to the variety of polymers available, virtually any compound can be incorporated, and delivery durations can be altered to suit the specific delivery requirements of a topical delivery vehicle [55, 56].”
Soy Protein: Wound Healing Applications
Zilberman, M., Peles, Z., & Olami, H. (2016) · Taylor & Francis eBooks · doi:10.1081/e-ebpp-120050546
Polyurethanes: Polyurethane–Silicone Copolymers and
Rahimi, S. K., Aeinehvand, R., & Kafshgari, M. H. (2016) · Taylor & Francis eBooks · doi:10.1081/e-ebpp-120050583
Bondaruk, O., & Karabanova, L. V. (2022) · Polymer journal · doi:10.15407/polymerj.44.01.003 · Cited by 1
Terrell, L. (2012) · Louisiana State University · doi:10.31390/gradschool_theses.1533 · Cited by 1
Medtronic, C., Panwar, A., Shangari, J., et al. (2022) · International Journal of Engineering Applied Sciences and Technology · doi:10.33564/ijeast.2022.v06i12.001
Recent Advances in Biomaterial Based Tissue Engineering for Intervertebral Disc Regeneration
Mahor, S., Collin, E. C., Dash, B. C., Pandit, A. S., & Eglin, D. (2010) · Synthesis lectures on tissue engineering · doi:10.1007/978-3-031-02580-8_2
Doku Mühendisliğinde Yeni Tip Grafen Esaslı Kemik İskelesi
Kırkbınar, M., İbrahimoğlu, E., & Çalışkan, F. (2022) · Düzce Üniversitesi Bilim ve Teknoloji Dergisi · doi:10.29130/dubited.1079780
da Costa, N. M. M. (2022) · Digital Library of Theses and Dissertations (Universidade de São Paulo) · doi:10.11606/t.58.2022.tde-05122022-141445
Nonaka, T., Nagaishi, Y., Murata, D., Hara, H., & Nakayama, K. (2022) · Springer eBooks · doi:10.1007/978-3-031-11570-7_9 · Cited by 1
Green Materials for 3D Printing in Dentistry
Banakar, M., Sijanivandi, S., Mousavi, S. M., Hashemi, S. A., & Lai, C. W. (2022) · Encyclopedia of Green Materials · doi:10.1007/978-981-16-4921-9_69-1
Implantology of Fractures of the Radial Head and Neck
Jukes, C. P., Dirckx, M., & Phadnis, J. (2022) · Springer eBooks · doi:10.1007/978-981-15-6278-5_70-1
Krier, M. (2023) · eDiss (Georg-August-Universität Göttingen) · doi:10.53846/goediss-9686
Ondreka, M. (2023) · Publication Server of Goethe University Frankfurt am Main (Goethe University Frankfurt) · doi:10.21248/gups.73387
Pebriyanti, D. (2015) · Jurnal Scientia Indonesia · doi:10.15294/jsi.v1i2.29402
Najafi, A., & Zolfaghari, A. (2022) · مهندسی مکانیک مدرس · doi:10.52547/mme.23.1.1
PreparATION and characterization of nanofibROUS materials with a shishkebab structure
Havlíčková, K., Lisnenko, M., HAUZEROVÁ, Š., et al. (2022) · NANOCOM ... · doi:10.37904/nanocon.2022.4604
Bikuña, M. (2023) · Depósito Académico Digital Universidad de Navarra (University of Navarra) · doi:10.15581/10171/66810 · Cited by 2
Biological effect of collagen scaffolds on rabbit’s socket healing
Hafez, K. Y., Koura, A. S., Kawana, K., et al. (2023) · Alexandria Dental Journal · doi:10.21608/adjalexu.2022.144565.1288
“(28) Collagen, fibrinogen, and elastin are a few of the natural polymers that make up the extracellular matrix (29).”
BackgroundWangdee, C., Panasophonkul, S., Thadavirul, N., Soontornvipart, K., Pavasant, P., Supaphol, P., Techakumphu, M., & Tharasanit, T. (2018) · The Thai Journal of Veterinary Medicine · doi:10.56808/2985-1130.2944
“, 2007) with advantages over other polymeric materials for the bone formation and remodeling phase including good biocompatibility, providing mechanical strength, giving more stability in ambient conditions and slow biodegradation rate (Gunatillake and Adhikari, 2003; Shor et al., 2007).”
BackgroundGhoshal, C., Pandey, S., & Tomer, A. (2023) · BENTHAM SCIENCE PUBLISHERS eBooks · doi:10.2174/9789815124033123010014
A Review of Materials Suitable for Tissue-Engineered Bone Scaffolds
Manohar, S. S., Das, C., & Kakati, V. (2023) · Lecture notes in electrical engineering · doi:10.1007/978-981-99-4362-3_3
Implantology of Fractures of the Radial Head and Neck
Jukes, C. P., Dirckx, M., & Phadnis, J. (2023) · Springer eBooks · doi:10.1007/978-981-19-7540-0_70
Musculoskeletal Pains and its Common Diseases: Novel Insights in Treatments Using Biomaterials
Aghmiuni, A. I., Keshel, S. H., & Zahraei, M. (2023) · Springer eBooks · doi:10.1007/978-981-99-2119-5_23
Development and Analysis of Biomaterial Based on Calcium Sulfate Hemihydrate and Epoxy Resin
Arshad, S., Aijaz, H., Rizwan, M., Khan, T., & Haque, M. Z. U. (2024) · Sir Syed University Research Journal of Engineering & Technology · doi:10.33317/ssurj.570
3D printing technologies for skin wound healing applications
Tabriz, A. G., & Douroumis, D. (2024) · Elsevier eBooks · doi:10.1016/b978-0-323-91111-5.00005-6 · Cited by 2
Biomedical Applications of Polycaprolactone
Ray, A., & Annu, A. (2024) · Wiley eBooks · doi:10.1002/9781119865452.ch14 · Cited by 1
The progress in tissue engineering of kidney
Dalal, S., Maleki, A., Mozafari, M., Saeinasab, M., & Sefat, F. (2024) · Elsevier eBooks · doi:10.1016/b978-0-443-15834-6.00002-9
Çatıker, E., & Şekeroğlu, V. (2024) · SSRN Electronic Journal · doi:10.2139/ssrn.4851441
Biomaterial based treatment strategies for lung and respiratory diseases
Bagul, H., & Srivastava, A. (2024) · Elsevier eBooks · doi:10.1016/b978-0-443-19085-8.00011-4
Powdered polydioxanone – synthetic polymer that stimulates formation of collagen in aging skin
Gemza, K., & Surgiel-Gemza, A. (2024) · Aesthetic Cosmetology and Medicine · doi:10.52336/acm.2024.020 · Cited by 1
Nonaka, T., Nagaishi, Y., Murata, D., Hara, H., & Nakayama, K. (2024) · Springer eBooks · doi:10.1007/978-3-031-65236-3_9
Biomaterials: Controlling Properties Over Time to Mimic the Dynamic Extracellular Matrix
Sawick, L., & Kloxin, A. M. (2015) · Royal Society of Chemistry eBooks · doi:10.1039/9781839168956-00285
Shkarupa, D., Шахалиев, Р. А., Shulgin, A. S., Filipenko, T. S., Kubin, N., & Labetov, I. A. (2024) · Urology Herald · doi:10.21886/2308-6424-2024-12-5-63-73 · Cited by 2
Metadata
- Authors
- CSIRO Molecular Science, B. 1., & Gunatillake, P.
- Corresponding author
- CSIRO Molecular Science, Bag 10, Clayton South MDC, Vic 3169, Australia
- Venue
- European Cells and Materials
- Publisher
- Forum Multimedia Publishing LLC
- Published
- 2003-10-01
- Volume
- 5
- Pages
- 1-16
- ISSN
- 1473-2262 (ISSN-L)
- OpenAlex
- W2106035984
- Cited by
- 1,765
- References
- 97
- Citations by year
- 2026: 43 · 2025: 61 · 2024: 59 · 2023: 80 · 2022: 90 · 2021: 112 · 2020: 102 · 2019: 115 · 2018: 105 · 2017: 128 · 2016: 110 · 2015: 106 · 2014: 110 · 2013: 91 · 2012: 86
- FWCI
- 1.32
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- cc-by
- Locations
- European Cells and Materials (publishedVersion, cc-by)
- PubMed (publishedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Engineering › Biomedical Engineering › Bone Tissue Engineering Materials
- Health Sciences › Medicine › Surgery › Surgical Sutures and Adhesives
- Keywords
- tissue engineering, polyesters, polyglycolic acid, polylactic acid, polyanhydrides, polyphosphazenes, polyurethane, poly(propylene fumarate), injectable polymers, orthopedic tissue engineering, biodegradation, biocompatibility, degradation products
- MeSH terms
- Biocompatible Materials, Models, Chemical, Polymers, Tissue Engineering
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.