Biodegradable synthetic polymers for tissue engineering
Open accessThe DOI matches its Crossref record; 96 of the 97 references it cites were found in a registry or an index; 1 of the 146 sources its claims cite were checked for support.
Abstract
This review focuses on biodegradable synthetic polymers, discussing synthesis, properties and biodegradability, especially within the polyester family including polylactides.
Overview
CoChat Summary
TL;DR
This review surveys biodegradable synthetic polymers for tissue engineering, emphasizing polyesters (PGA, PLA, PLGA), polylactones, poly(propylene fumarate), polyanhydrides, tyrosine-derived polycarbonates, polyorthoesters, polyurethanes, and polyphosphazenes. It concludes that polyesters dominate clinically, while injectable in situ curable systems such as PPF and photocrosslinkable polyanhydrides are promising but face challenges in biocompatibility, degradation control, and heat generation.
Key findings
- Polyesters are the most studied biodegradable polymers. PGA has 46–50% crystallinity, Tg 36°C, Tm 225°C; in Dexon sutures in vitro, first-stage degradation predominates for 21 days, crystalline degradation takes a further 28 days, and after 49 days weight loss was about 42% with complete loss of mechanical properties.
- PLA/PGA copolymer behavior depends on composition: 25–75% (l)LA/GA and 0–70% (dl)LA/GA are amorphous; 70/30 GA/LA has the highest water uptake, while 50/50 is reported as most unstable to hydrolysis; Vicryl is 8% (l)LA and 92% GA.
- Poly(caprolactone) degrades slowly: homopolymer degradation is on the order of 2–3 years, and PCL with initial average molecular weight 50,000 takes about 3 years for complete in vitro degradation.
- Poly(propylene fumarate) degrades to fumaric acid and propylene glycol; time to 20% original weight loss ranged from 84 days (PPF/β-TCP composite) to over 200 days (PPF/CaSO4 composite). PPF formulations showed maximum curing temperatures of 38–48°C versus 94°C for PMMA cements, curing times of 1–121 min, and compressive strengths of 1–12 MPa.
- Polyanhydrides degrade by surface erosion; poly(sebacic acid) degrades in about 54 days in saline, while poly(1,6-bis(p-carboxyphenoxy)hexane) is estimated at 1 year. Poly[1,6-bis(carboxyphenoxy)hexane] has a Young’s modulus of 1.3 MPa versus human bone at 40–60 MPa; poly(anhydride-co-imides) reached compressive strengths of 50–60 MPa, and photocrosslinked systems showed compressive strengths of 30–40 MPa and tensile strengths of 15–27 MPa.
- Degradable polyurethanes based on lysine diisocyanate showed varied properties: dl-lactide networks were rigid (Tg = 60°C) with ultimate tensile strengths of ~40–70 MPa, caprolactone triol networks were low-modulus elastomers with tensile strengths of 1–4 MPa, and copolymer networks had elongation up to 600% with compressive strengths of 3–25 MPa. In vivo, porous polyurethane artificial skin degraded almost completely 4–8 weeks after implantation in guinea pigs with no adverse tissue reaction.
Methods
- Design: narrative literature review; no primary experimental study or systematic review protocol is reported.
- Data/sample: published literature on biodegradable synthetic polymers, including synthesis, properties, degradation, biocompatibility, and injectable polymer systems; Tables 1–3 summarize polymer properties and precursors.
- Analysis: qualitative synthesis of major polymer classes, their degradation modes/products, mechanical properties, biocompatibility, and potential for injectable tissue-engineering compositions.
Limitations
- Stated: the paper notes that Table 2 data “should be used as a guide only” and that sufficient data are not available to provide a comprehensive list of properties for polyanhydrides, polycarbonates, polyurethanes, and polyphosphazenes.
- Stated: for polyanhydrides, no data are reported about polymer sterilizability and heat generation during polymerization; for degradable polyurethanes, the effect of degradation products and how they are removed from the body are not clearly understood.
- Evident: as a narrative review, it lacks systematic search criteria, study quality appraisal, and meta-analysis, so conclusions depend on the cited literature and may not comprehensively cover all biodegradable polymers or tissue-engineering applications.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
1 Valid · 20 Not valid · 105 Not checked · 89 Own results and interpretations
Every source the paper cites for this claim was checked and supports it.
In the paper
“A meniscal replica implanted contained only fibro-cartilage after 18 weeks and decreased the degradation of the articular cartilage.”
What the sources say
- Supportedcites De Groot et al.., 1996 source
The Aliphatic PU network passage (page not provided) reports that articular-cartilage degeneration was less severe with the prosthesis than in meniscectomized control knees. It also says the prostheses contained only fibrocartilage after 18 weeks. Degeneration was reduced, not eliminated. (LLM, conf=0.91)
plainstates a causeSingle case- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
In the paper
“The compressive strengths varied between 1 and 12 MPa”
What the sources say
- Not matchedcites Peter et al., 1998a
Couldn’t be matched to a paper in Crossref, so it can’t be checked.
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Not matched
In the paper
“Cross-linking characteristics reported for PPF, N-vinyl pyrrolidone (N-VP), benzoyl peroxide, sodium chloride, and TCP indicate that for a range of formulations, the maximum temperature varied within 38 to about 48ºC, compared to 94ºC observed for polymethylmethacrylate (PMMA) cements.”
What the sources say
- Not matchedcites Peter et al., 1998a
Couldn’t be matched to a paper in Crossref, so it can’t be checked.
hedged- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Not matched
None of the sources cited for this claim could be matched to a paper in Crossref, so there is nothing to check it against.
In the paper
“Based on in-vitro studies, the time required to reach 20% loss in original weight ranged from 84 (PPF/ß-TCP composite) to over 200 days (PPF/CaSO 4 composite)”
What the sources say
- Not matchedcites Peter et al., 1997b
Couldn’t be matched to a paper in Crossref, so it can’t be checked.
- Not matchedcites Kharas et al., 1997
Couldn’t be matched to a paper in Crossref, so it can’t be checked.
plainstates an association- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Not matched
A result the paper states — it cites no source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“These composite materials exhibit compressive strengths in the range 2 to 30 MPa.”
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
94 more claims
Create a free account to see all 215 claims and to verify the 2 references still open.
- It may state two separate claims as one. 62
- Probably not a substantial claim. 76
- The quote only partly states this claim. 1
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Advantages include a tightly controlled manufacturing process, accurate reproducibility, adjustable biodegradability, and a wide variety of both chemical and physical properties.[ 171 ]”
From Unraveling and Harnessing the Immune Response at the Cell–Biomaterial Interface for Tissue Engineering Purposes (2024) · cites this paper as [171]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated major: it would touch a result — a value a result rests on, reported and recomputed p-values on opposite sides of the significance level, two passages that conflict with no sign which is right, or a cited work retracted before this paper was published.
In the paper
§ Polyanhydrides
“Polyanhydrides degrades by surface erosion (Kohn and Langer, 1997) and their main applications are in controlled drug delivery.”
§ Conclusions
“Polyanhydride degrade by bulk erosion and their main applications are in controlled drug delivery.”
Citations
Cites
Synthetic biodegradable polymers as orthopedic devices
Middleton, J. C., & Tipton, A. J. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00101-0 · Cited by 2,741 · cited 4×
“…developments in siloxane-based polyurethanes, which have greater in-vivo stability than conventional polyetherurethanes (e.g., poly(tetramethylene oxide) (PTMO)-based) have provided opportunities for development of a range of medical implants for chronic applications (Gunatillake et al., 2001).”
BackgroundInfluentialBiomaterial developments for bone tissue engineering
Burg, K. J. L., Porter, S., & Kellam, J. F. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00102-2 · Cited by 1,643 · cited 1×
“Polyesters have also been considered for development of tissue engineering applications (Hubbell, 1995; Thomson et al 1995a, Yazemski et al. 1996; Wong and Mooney, 1997), particularly for bone tissue engineering (Kohn and Langer, 1997; Burg et al., 2000).”
BackgroundChandra, R. (1998) · Progress in Polymer Science · doi:10.1016/s0079-6700(97)00039-7 · Cited by 1,462
Biodegradable polymers for use in surgery—polyglycolic/poly(actic acid) homo- and copolymers: 1
Gilding, D. K., & Reed, A. M. (1979) · Polymer · doi:10.1016/0032-3861(79)90009-0 · Cited by 1,345
Biomaterials in Tissue Engineering
Hubbell, J. A. (1995) · Nature Biotechnology · doi:10.1038/nbt0695-565 · Cited by 1,060 · cited 1×
“Polyesters have also been considered for development of tissue engineering applications (Hubbell, 1995; Thomson et al 1995a, Yazemski et al. 1996; Wong and Mooney, 1997), particularly for bone tissue engineering (Kohn and Langer, 1997; Burg et al., 2000).”
BackgroundPolylactic Acid for Surgical Implants
KULKARNI, R. K. (1966) · Archives of Surgery · doi:10.1001/archsurg.1966.01330050143023 · Cited by 841
Evolution of bone transplantation: molecular, cellular and tissue strategies to engineer human bone
Yaszemski, M. J., Payne, R. G., Hayes, W. C., Langer, R., & Mikos, A. G. (1996) · Biomaterials · doi:10.1016/0142-9612(96)85762-0 · Cited by 729
Miller, R. A., Brady, J. M., & Cutright, D. E. (1977) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820110507 · Cited by 722 · cited 2×
“For the (l)LA/GA copolymers, resistance to hydrolysis is more pronounced at either end of the copolymers compositions range (Miller et al., 1977; Gilding and Reed, 1979; Reed and Gilding, 1981; Vert et al., 1984).”
BackgroundInjectable biodegradable materials for orthopedic tissue engineering
Temenoff, J. S., & Mikos, A. G. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00108-3 · Cited by 554 · cited 8×
“A number of methods have been reported to prepare PPF, and each results in different polymer properties (Peter et al., 1997a,b, 1999; Temenoff and Mikos 2000).”
BackgroundMethodInfluentialLeong, K. W., Brott, B. C., & Langer, R. (1985) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820190806 · Cited by 541 · cited 12×
“The polyurethanes ranged from elastomers with elongations at break as high as 780 %, but with low tensile strengths (5.8 to 8.1 MPa).”
BackgroundInfluentialZdrahala, R. J., & Zdrahala, I. J. (1999) · Journal of Biomaterials Applications · doi:10.1177/088532829901400104 · Cited by 540
Reed, A. M., & Gilding, D. K. (1981) · Polymer · doi:10.1016/0032-3861(81)90168-3 · Cited by 502
Fabrication of biodegradable polymer scaffolds to engineer trabecular bone
Thomson, R. C., Yaszemski, M. J., Powers, J. M., & Mikos, A. G. (1996) · Journal of Biomaterials Science, Polymer Edition · doi:10.1163/156856295x00805 · Cited by 493
Formation of highly porous biodegradable scaffolds for tissue engineering
Mikos, A. G., & Temenoff, J. S. (2000) · Electronic Journal of Biotechnology · doi:10.2225/vol3-issue2-fulltext-5 · Cited by 426
Polyurethanes in Biomedical Applications
(2017) · Polyurethanes in Biomedical Applications · doi:10.1201/9780203742785-9 · Cited by 413
Biodegradable polymer scaffolds to regenerate organs
Thomson, R. C., Wake, M. C., Yaszemski, M. J., & Mikos, A. G. (1995) · Advances in Polymer Science · doi:10.1007/3540587888_18 · Cited by 383
Osteolytic changes accompanying degradation of absorbable fracture fixation implants
Bostman, O. (1991) · The Journal of Bone and Joint Surgery. British volume · doi:10.1302/0301-620x.73b4.1649195 · Cited by 294
Hydrolytic degradation of polyglycolic acid: Tensile strength and crystallinity study
Chu, C. C. (1981) · Journal of Applied Polymer Science · doi:10.1002/app.1981.070260527 · Cited by 265
Synthetic Biodegradable Polymer Scaffolds
(1997) · Birkhäuser Boston eBooks · doi:10.1007/978-1-4612-4154-6 · Cited by 264
Frontiers in Tissue Engineering
(1998) · Elsevier eBooks · doi:10.1016/b978-0-08-042689-1.x5001-8 · Cited by 258
Peppas, N. A. (1984) · Journal of Controlled Release · doi:10.1016/0168-3659(84)90034-8 · Cited by 255
Pinchuk, L. (1995) · Journal of Biomaterials Science, Polymer Edition · doi:10.1163/156856294x00347 · Cited by 252
Hollinger, J. O. (1983) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820170107 · Cited by 247 · cited 7×
“The most effective means of photopolymerization of these macromonomers was found to be 1.0 wt % camphorquinone and 1.0 wt % ethyl-4-N,N-dimethyl aminobenzoate with 150 mW/cm2.”
BackgroundMethodInfluentialPolyanhydrides. I. Preparation of high molecular weight polyanhydrides
Domb, A. J., & Langer, R. (1987) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.1987.080251217 · Cited by 234 · cited 1×
“Polyanhydrides are synthesized (Figure 3) by dehydration of the diacid or a mixture of diacids by melt polycondensation (Domb and Langer, 1987).”
MethodSkarja, G. A., & Woodhouse, K. A. (2000) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(20000321)75:12<1522::aid-app11>3.0.co;2-a · Cited by 216
Zhang, J. Y., Beckman, E. J., Piesco, N. P., & Agarwal, S. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00005-3 · Cited by 202 · cited 1×
“Zang et al. (2000) have developed a peptide based polyurethane scaffold for tissue engineering.”
BackgroundMelt block copolymerization of ?-caprolactone andL-lactide
In't Veld, P. J. A., Velner, E. M., Van De Witte, P., Hamhuis, J., Dijkstra, P. J., & Feijen, J. (1997) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/(sici)1099-0518(19970130)35:2<219::aid-pola3>3.0.co;2-n · Cited by 197
Multifunctional initiation of lactide polymerization by stannous octoate/pentaerythritol
Kim, S. H., Han, Y., Kim, Y. H., & Hong, S. I. (1992) · Die Makromolekulare Chemie · doi:10.1002/macp.1992.021930706 · Cited by 196 · cited 1×
“We have also come across references which state that stannous octoate is accepted by FDA as a food additive (Gilding and Reed, 1979, text reference; Kim et al., 1992) In most cases the polymerisation catalysts or initiator residues are extremely difficult to remove from the final polymer, and…”
BackgroundA review of photocrosslinked polyanhydrides:
Burkoth, A. K., & Anseth, K. S. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00107-1 · Cited by 191 · cited 4×
“…in the literature (Leong et al., 1985, Attawia et al., 1995; Uhrich et al., 1995; Seidel et al., 1996; Kharas et al., 1997; Uhrich et al., 1997; Muggli et al., 1998; Peter et al., 1998b; Burkoth and Anseth, 2000; Temenoff and Mikos, 2000) with potential to develop such polymer compositions.”
BackgroundInfluentialNorris, D. A., & Sinko, P. J. (1997) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19970314)63:11<1401::aid-app2>3.0.co;2-q · Cited by 186
BÖSTMAN, O. M. (1992) · Clinical Orthopaedics and Related Research · doi:10.1097/00003086-199205000-00031 · Cited by 185
Biomedical applications of synthetic biodegradable polymers
Hollinger, J. O. (1995) · CRC Press eBooks · Cited by 184
Use of polyphosphazenes for skeletal tissue regeneration
Laurencin, C. T., Norman, M. E., Elgendy, H. M., El‐Amin, S. F., Allcock, H. R., Pucher, S. R., & Ambrosio, A. A. (1993) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820270716 · Cited by 179
Skarja, G. A., & Woodhouse, K. A. (1998) · Journal of Biomaterials Science, Polymer Edition · doi:10.1163/156856298x00659 · Cited by 173
Absorbable polyglycolide devices in trauma and bone surgery
Ashammakhi, N., & Rokkanen, P. (1997) · Biomaterials · doi:10.1016/s0142-9612(96)00107-x · Cited by 166
Synthetic Biodegradable Polymers for Orthopaedic Applications
Behravesh, E., Yasko, A. W., Engel, P. S., & Mikos, A. G. (1999) · Clinical Orthopaedics and Related Research · doi:10.1097/00003086-199910001-00012 · Cited by 163 · cited 2×
“The major applications include resorbable sutures, drug delivery systems and orthopaedic fixation devices such as pins, rods and screws (Behravesh et al., 1999; Middleton and Tipton, 2000).”
BackgroundStorey, R. F., Wiggins, J. S., & Puckett, A. D. (1994) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.1994.080321216 · Cited by 161 · cited 1×
“Storey et al (1994) have prepared poly(ester urethane) networks from LDI and a series of polyester triols based on dl-lactide, γ-caprolactone, and their copolymers.”
BackgroundPolyurethanes in Biomedical Applications
Lamba, N. M. K., Woodhouse, K. A., & Cooper, S. L. (2017) · Routledge eBooks · doi:10.1201/9780203742785 · Cited by 161
Biodegradable implants in traumatology: a review on the state-of-the-art
Hofmann, G. O. (1995) · Archives of Orthopaedic and Trauma Surgery · doi:10.1007/bf00443385 · Cited by 155
Crommen, J. H. L., Schacht, E. H., & Mense, E. H. G. (1992) · Biomaterials · doi:10.1016/0142-9612(92)90028-m · Cited by 151
Biodegradable Polymers in Medicine and Surgery
Kronenthal, R. L. (1975) · Polymers in Medicine and Surgery · doi:10.1007/978-1-4684-7744-3_9 · Cited by 148
Bruin, P., Veenstra, G. J., Nijenhuis, A. J., & Pennings, A. J. (1988) · Die Makromolekulare Chemie, Rapid Communications · doi:10.1002/marc.1988.030090814 · Cited by 148
Principles of tissue engineering applied to programmable osteogenesis
Brekke, J. H., & Toth, J. M. (1998) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(199824)43:4<380::aid-jbm6>3.0.co;2-d · Cited by 143
Synthesis and Properties of Biodegradable Polymers Used as Synthetic Matrices for Tissue Engineering
Wong, W. H., & Mooney, D. J. (1997) · Birkhäuser Boston eBooks · doi:10.1007/978-1-4612-4154-6_4 · Cited by 138
Tissue engineering methods and protocols
Morgan, J. R., & Yarmush, M. L. (1999) · Cited by 127
Use of porous polyurethanes for meniscal reconstruction and meniscal prostheses
de Groot, J. H., de Vrijer, R., Pennings, A. J., Klompmaker, J., Veth, R. P. H., & Jansen, H. W. B. (1996) · Biomaterials · doi:10.1016/0142-9612(96)85761-9 · Cited by 125
The in‐vitro degradation of poly(glycolic acid) sutures — effect of pH
Chu, C. C. (1981) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820150604 · Cited by 123
An Industrial Outbreak of Toxic Hepatitis Due to Methylenedianiline
McGill, D. B., & Motto, J. D. (1974) · New England Journal of Medicine · doi:10.1056/nejm197408082910604 · Cited by 122
BIOMEDICAL APPLICATIONS OF POLYURETHANES
Uscátegui, Y. L., Díaz, L. E., & Valero, M. F. (2018) · Química Nova · doi:10.21577/0100-4042.20170191 · Cited by 122
Foreign-body reactions to polyglycolide screws: Observations in 24/216 malleolar fracture cases
Böstman, O. M., Partio, E. K., Hirvensalo, E., & Rokkanen, P. (1992) · Acta Orthopaedica Scandinavica · doi:10.3109/17453679209154817 · Cited by 117
Böstman, O. M., Päivärinta, U., Partio, E. K., Vasenius, J., Manninen, M. J., & Rokkanen, P. (1992) · Journal of Bone and Joint Surgery · doi:10.2106/00004623-199274070-00008 · Cited by 117
Histologic comparison of polylactic and polyglycolic acid sutures
Cutright, D. E., Beasley, J. D., & Perez, B. (1971) · Oral Surgery, Oral Medicine, Oral Pathology · doi:10.1016/0030-4220(71)90265-9 · Cited by 115 · cited 1×
“These polymers have been used as sutures (Cutright et al., 1971) plates and fixtures for fracture fixation devices (Mayer and Hollinger, 1995) and scaffolds for cell transplantation (Thomson et al. 1995b).”
MethodEnzyme-accelerated hydrolysis of polyglycolic acid.
Williams, D. F., & Mort, E. (1977) · PubMed · Cited by 114
An in‐vitro study of the effect of buffer on the degradation of poly(glycolic acid) sutures
Chu, C. C. (1981) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820150106 · Cited by 112
Biodegradable PLA-PGA Polymers for Tissue Engineering in Orthopaedics
Agrawal, C. M., Athanasiou, K. A., & Heckman, J. D. (1997) · Materials Science Forum · doi:10.4028/www.scientific.net/msf.250.115 · Cited by 111 · cited 2×
“Although it is possible to synthesize these polymers by acid-catalysed polycondensation of respective acids, the resulting polymers generally have a low molecular weight and often poor mechanical properties (Agrawal et al. 1997).”
BackgroundInfluentialThe anhydride content of some commercial PP-g-MA: FTIR and titration
Sclavons, M., Carlier, V., Roover, B. D., Franquinet, P., Devaux, J., & Legras, R. (1996) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19961121)62:8<1295::aid-app20>3.0.co;2-5 · Cited by 109
Reaction Behavior of Biodegradable, Photo-Cross-Linkable Polyanhydrides
Muggli, D. S., Burkoth, A. K., Keyser, S. A., Lee, H. R., & Anseth, K. S. (1998) · Macromolecules · doi:10.1021/ma980108n · Cited by 107 · cited 5×
“The systems developed are based on dimethacrylated anhydrides (Muggli et al., 1998; Burkoth and Anseth, 2000).”
BackgroundInfluentialPulapura, S., & Kohn, J. (1992) · Biopolymers · doi:10.1002/bip.360320418 · Cited by 107 · cited 1×
“Invivo studies have demonstrated that the polymer was biocompatible and promoted significant bone growth (Pulapura and Kohn, 1992; Muggli et al., 1998).”
BackgroundIn vivo and in vitro degradation of glycine/DL‐lactic acid copolymers
Schakenraad, J. M., Nieuwenhuis, P., Molenaar, I., Helder, J., Dijkstra, P. J., & Feijen, J. (1989) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820231105 · Cited by 101 · cited 1×
“A choice of a suitable curing method with minimal heat generation and chemical reactions that do not interfere with biological components is also very important for developing such polymer compositions.”
BackgroundPeter, S. J., Nolley, J. A., Widmer, M. S., Merwin, J. E., Yaszemski, M. J., Yasko, A. W., Engel, P. S., & Mikos, A. G. (1997) · Tissue Engineering · doi:10.1089/ten.1997.3.207 · Cited by 100
Preparation and characterization of hydroxyapatite/chitosan-gelatin network composite
Yin, Y., Zhao, F., Song, X. F., Yao, K. D., Lu, W. W., & Leong, J. C. Y. (2000) · Journal of Applied Polymer Science · doi:10.1002/1097-4628(20000923)77:13<3015::aid-app28>3.0.co;2-w · Cited by 95
Spaans, C. J., Belgraver, V. W., Rienstra, O., de Groot, J. H., Veth, R. P. H., & Pennings, A. J. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00113-7 · Cited by 91 · cited 1×
“Micro-porous polyurethane amide and polyurethaneurea scaffolds have been evaluated by Spaans et al. (2000) for repair and replacement of knee-joint meniscus.”
BackgroundGogolewski, S., & Pennings, A. J. (1983) · Die Makromolekulare Chemie Rapid Communications · doi:10.1002/marc.1983.030041008 · Cited by 89
Tangpasuthadol, V., Pendharkar, S. M., & Kohn, J. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00104-6 · Cited by 87
Gogolewski, S., & Pennings, A. J. (1982) · Die Makromolekulare Chemie, Rapid Communications · doi:10.1002/marc.1982.030031201 · Cited by 83 · cited 1×
“For example, degradation products of polyurethanes based on diisocyanates such as 4,4’-methylenediphenyl diisocyanae (MDI) and toluene diisocyanate (TDI) are toxic (McGill and Motto, 1974; Gogolewski and Pennings, 1982).”
Backgroundde Groot, J. H., Nijenhuis, A. J., Bruin, P., Pennings, A. J., Veth, R. P. H., Klompmaker, J., & Jansen, H. W. B. (1990) · Colloid and Polymer Science · doi:10.1007/bf01410672 · Cited by 81 · cited 1×
“These polymers have been used as sutures (Cutright et al., 1971) plates and fixtures for fracture fixation devices (Mayer and Hollinger, 1995) and scaffolds for cell transplantation (Thomson et al. 1995b).”
MethodEvaluation and comparisons of biodegradable substances as osteogenic agents
Nelson, J. F., Stanford, H. G., & Cutright, D. E. (1977) · Oral Surgery, Oral Medicine, Oral Pathology · doi:10.1016/0030-4220(77)90075-5 · Cited by 80 · cited 2×
“PLA-PGA copolymers used in bone repair applications have shown to be biocompatible, non-toxic and non-inflammatory (Nelson et al., 1977; Hollinger, 1983).”
BackgroundTangpasuthadol, V., Pendharkar, S. M., Peterson, R. C., & Kohn, J. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00105-8 · Cited by 79 · cited 1×
“Tyrosine-based polycarbonates (Figure 5) have been reported as promising degradable polymers for use in orthopaedic applications (Muggli et al., 1998; Tangpasuthadol et al., 2000a,b).”
BackgroundSynthesis of degradable, biocompatible, and tough block‐copolyesterurethanes
Hirt, T. D., Neuenschwander, P., & Suter, U. W. (1996) · Macromolecular Chemistry and Physics · doi:10.1002/macp.1996.021971221 · Cited by 78 · cited 1×
“Hirt et al. (1996) and De Groot et al. (1990) reported on the synthesis and properties of degradable polyurethanes based on LDI, 2,2,4-triethylhexamethylene diisocyanate and a number of polyester and copolyester polyols such as Diorez®, caprolactone, ethylene glycol copolymers, and poly hydroxy…”
BackgroundBruin, P., Smedinga, J., Pennings, A. J., & Jonkman, M. F. (1990) · Biomaterials · doi:10.1016/0142-9612(90)90013-g · Cited by 76 · cited 1×
“Polyurethane networks based on LDI and poly(glycolide-co-γ-caprolactone) macrodiol was evaluated by Bruin et al. (1990) as two-layer artificial skin.”
MethodPeter, S. J., Suggs, L. J., Yaszemski, M. J., Engel, P. S., & Mikos, A. G. (1999) · Journal of Biomaterials Science Polymer Edition · doi:10.1163/156856299x00423 · Cited by 75
Use of surface-modifying macromolecules to enhance the biostability of segmented polyurethanes
Tang, Y. W., Santerre, J. P., Labow, R. S., & Taylor, D. G. (1997) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(19970605)35:3<371::aid-jbm11>3.0.co;2-i · Cited by 65
In vitro biocompatibility testing of polylactides Part I Proliferation of different cell types
van Sliedregt, A., Radder, A. M., de Groot, K., & van Blitterswijk, C. (1992) · Journal of Materials Science Materials in Medicine · doi:10.1007/bf00705369 · Cited by 64
Anticoagulant activity of dextran derivatives
de Raucourt, E., Mauray, S., Chaubet, F., Maiga-Revel, O., Jozefowicz, M., & Fischer, A. (1998) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(199807)41:1<95::aid-jbm12>3.0.co;2-g · Cited by 62
Bioabsorbable composites. II: Nontoxic, L‐lysine‐based poly(ester‐urethane) matrix composites
Storey, R. F., Wiggins, J. S., Mauritz, K. A., & Puckett, A. D. (1993) · Polymer Composites · doi:10.1002/pc.750140104 · Cited by 58 · cited 1×
“Lysine diisocyanate is not commercially available (being developed by Kyowa Hakko Kogyo Co., Chiyoda-Ku, Tokyo, Japan) but can be prepared from L-lysine monohydrochloride (Bruin et al., 1988; Storey et al., 1993).”
BackgroundVerheyen, C. C. P. M., De Wijn, J. R., van Blitterswijk, C. A., Rozing, P. M., & de Groot, K. (1993) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820270817 · Cited by 50
Hollinger, J. O. (1983) · Journal of Bone and Mineral Research · Cited by 41
Degradation Phenomena on Polymeric Biomaterials
Planck, H., Dauner, M., & Renardy, M. (1992) · Medical Entomology and Zoology · Cited by 38
Biodegradable Polymers for Biomedical Applications
(2022) · Frontiers research topics · doi:10.3389/978-2-88976-571-3 · Cited by 38
Photopolymerization of Novel Degradable Networks for Orthopedic Applications
Anseth, K. S., Svaldi, D. C., Laurencin, C. T., & Langer, R. (1997) · ACS Symposium Series · doi:10.1021/bk-1997-0673.ch014 · Cited by 35 · cited 1×
“Compressive strengths of 30-40 MPa, and tensile strengths of 15-27 MPa, similar to those of cancelleous bone, have been reported (Anseth et al., 1997).”
BackgroundPolymers for tissue engineering
Baldwin, S. P., & Saltzman, W. M. (1996) · Trends in polymer science · Cited by 35
Advances in human fertility and reproductive endocrinology
Mishell, D. R. (1983) · Medical Entomology and Zoology · Cited by 34
Heller, J., Barr, J., Ng, S. Y., Shen, H.-R., Schwach-Abdellaoui, K., Gurny, R., Vivien-Castioni, N., Loup, P. J., Baehni, P., & Mombelli, A. (2002) · Biomaterials · doi:10.1016/s0142-9612(02)00180-1 · Cited by 33 · cited 1×
“Poly(ortho esters) based injectable polymer has also been reported (Heller et al., 2002) for use in pain control and periodontal treatment.”
BackgroundTissue Response to Resorbable Synthetic Polymers
Gibbons, D. F. (1992) · Degradation Phenomena on Polymeric Biomaterials · doi:10.1007/978-3-642-77563-5_8 · Cited by 31 · cited 2×
“It has been shown that as the material degrades the small particles that break off are phagocytized by macrophages and multinucleated giant cells (Gibbons, 1992).”
Background(1990) · PubMed · Cited by 24
Inorganic‐organic polymers as a route to biodegradable materials
Allcock, H. R. (1999) · Macromolecular Symposia · doi:10.1002/masy.19991440105 · Cited by 16 · cited 1×
“Although most polyphosphazenes are biostable, incorporation of specific side groups such as amino acid esters, glucosyl, glyceyl, lactate, or imidazolyl units can render polyphosphazenes biodegradable (Alcock, 1999; Behravesh et al., 1999; Qui and Zhu, 2000).”
BackgroundLegeais, J., Drubaix, I., Briat, B., Savoldelli, M., M�nasche, M., Robert, L., Renard, G. J., & Pouliquen, Y. J. M. (1997) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(199707)36:1<65::aid-jbm8>3.0.co;2-j · Cited by 10
Injectable Biodegradable Materials for Orthopaedic Tissue Engineering
Temenoff, J. S., & Mikos, A. G. (2002) · Springer eBooks · doi:10.1007/978-94-010-0305-6_16 · Cited by 7
Suzuki, S., & Ikada, Y. (2011) · Humana Press eBooks · doi:10.1007/978-1-61779-570-1_3 · Cited by 6
Sawhney, A. S., & Drumheller, P. D. (1998) · Elsevier eBooks · doi:10.1016/b978-008042689-1/50007-8 · Cited by 6
Yaszemski, M. J., Mikos, A. G., Payne, R. G., & Hayes, W. C. (1993) · MRS Proceedings · doi:10.1557/proc-331-251 · Cited by 5
Preparation and Use of Porous Poly(α-Hydroxyester) Scaffolds for Bone Tissue Engineering
Jen, A. C., Peter, S. J., & Mikos, A. G. (2003) · Tissue Engineering · doi:10.1385/0-89603-516-6:133 · Cited by 5 · cited 1×
“Although common processing techniques such as extrusion, injection and compression moulding can be used to fabricate PGA into various forms, its high sensitivity to hydrolytic degradation requires careful control of processing conditions (Mikos and Temenoff, 2000, Jen et al. 1999).”
(1999) · doi:10.1002/(sici)1097-4636(1999)48:5<602::aid-jbm3>3.0.co;2-6
(1996) · doi:10.1002/(sici)1097-4636(199602)30:2<133::aid-jbm1>3.0.co;2-s
(1997) · doi:10.1002/(sici)1097-4628(19971107)66:6<1123::aid-app13>3.0.co;2-2
POLYLACTIC ACID FOR SURGICAL IMPLANTS
Kulkarni, R. K., Pani, K. C., Neuman, C., & Leonard, F. (1966) · doi:10.21236/ad0636716
Research works printed but not linked: 5
- Scranton A, Bowman C, Peiffer R, eds. ACS Symposium Series 673; American Chemical Society, Washington DC. pp 189-202.
- Ratner BD, Hoffman AS, Schoen FJ, Lemon JE, eds. Aca- demic Press, San Diego. pp 65-73.
- Lamba NMK, Woodhouse KA, Cooper SL (1998) Poly- urethanes in Biomedical Applications. CRC Press: New York p 205-241.
- Mark JE, Alcock HR, West R (1992) Inorganic Poly- mers. Prentice Hall, Upper Saddle River, NJ. Chapter
- Ng SY, Vandamme T, Tayler MS, Heller J (1997) Syn- thesis and erosion studies of self-catalysed poly(orthoester)s. Macromolecules 30: 770-772.
Cited by
The return of a forgotten polymer—Polycaprolactone in the 21st century
Woodruff, M. A., & Hutmacher, D. W. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2010.04.002 · Cited by 4,033
Biodegradable and bioactive porous polymer/inorganic composite scaffolds for bone tissue engineering
Rezwan, K., Chen, Q. Z., Blaker, J. J., & Boccaccini, A. R. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.01.039 · Cited by 3,839
“Surface erodative polymers Poly(anhydrides) [31,40,41] 150–200 Surface 25–27 0.”
BackgroundAn Overview of Poly(lactic-co-glycolic) Acid (PLGA)-Based Biomaterials for Bone Tissue Engineering
Gentile, P., Chiono, V., Carmagnola, I., & Hatton, P. (2014) · International Journal of Molecular Sciences · doi:10.3390/ijms15033640 · Cited by 1,593
Silk fibroin biomaterials for tissue regenerations
Kundu, B., Rajkhowa, R., Kundu, S. C., & Wang, X. (2013) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2012.09.043 · Cited by 1,391
A Comparative Review of Natural and Synthetic Biopolymer Composite Scaffolds
Reddy, M. S. B., Ponnamma, D., Choudhary, R., & Sadasivuni, K. K. (2021) · Polymers · doi:10.3390/polym13071105 · Cited by 1,104
Metadata
- Authors
- CSIRO Molecular Science, B. 1., & Gunatillake, P.
- Corresponding author
- CSIRO Molecular Science, Bag 10, Clayton South MDC, Vic 3169, Australia
- Venue
- European Cells and Materials
- Publisher
- Forum Multimedia Publishing LLC
- Published
- 2003-10-01
- Volume
- 5
- Pages
- 1-16
- ISSN
- 1473-2262 (ISSN-L)
- OpenAlex
- W2106035984
- Cited by
- 1,765
- References
- 97
- Citations by year
- 2026: 43 · 2025: 61 · 2024: 59 · 2023: 80 · 2022: 90 · 2021: 112 · 2020: 102 · 2019: 115 · 2018: 105 · 2017: 128 · 2016: 110 · 2015: 106 · 2014: 110 · 2013: 91 · 2012: 86
- FWCI
- 1.32
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- cc-by
- Locations
- European Cells and Materials (publishedVersion, cc-by)
- PubMed (publishedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Engineering › Biomedical Engineering › Bone Tissue Engineering Materials
- Health Sciences › Medicine › Surgery › Surgical Sutures and Adhesives
- Keywords
- tissue engineering, polyesters, polyglycolic acid, polylactic acid, polyanhydrides, polyphosphazenes, polyurethane, poly(propylene fumarate), injectable polymers, orthopedic tissue engineering, biodegradation, biocompatibility, degradation products
- MeSH terms
- Biocompatible Materials, Models, Chemical, Polymers, Tissue Engineering
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.