Time transfer and significance of vertical land motion in relativistic geodesy applications: a review paper
Open accessThe DOI matches its Crossref record; 59 of the 61 references it cites were found in a registry or an index; 18 of the 33 sources its claims cite were checked for support.
Abstract
Review of relativistic geodesy, optical atomic clock measurements, and their use for practical realization of vertical datums and height systems.
Overview
CoChat Summary
## TL;DR
This review paper surveys relativistic (clock-based) geodesy, optical atomic clocks, and time/frequency transfer methods, with emphasis on how clock measurements can be used to infer geopotential and height differences. It also argues that tidal, non-tidal, and vertical land motion effects—especially hydrology loading—must be accounted for, because they can reach the 10^-18 level relevant to geodetic applications.
## Key findings
- A fractional frequency shift of 10^-18 corresponds to a height difference of about 1 cm at or near the Earth’s surface, and the paper states that with a clock accuracy of 10^-18, heights can be determined in the order of 1 cm.
- The paper reports that hydrology loading in its Fennoscandian example can affect gravitational redshift at levels close to the target uncertainty: for the ERA5 model, it found effects of about -4.4 to -7.8 × 10^-19 in winter and 2.9 to 4.7 × 10^-19 in summer; for GLDAS2 and MERRA2, the impact can reach 9 × 10^-19 at Metz.
- For 2018, the ERA5 model showed vertical land motion of about 6.9 mm/year at Onsala, 8.6 mm/year at Kiruna, and 8.7 mm/year at Metz.
- The paper states that optical fiber links can achieve stability better than 10^-19 over about 1,400 km, and cites example network results such as 3 × 10^-17 for Paris–Braunschweig and 2 × 10^-19 for a 149 km link.
## Methods
- Narrative review of relativistic geodesy, optical atomic clocks, and time-transfer technologies, organized around theory, clock performance, network types, and perturbing geophysical effects.
- Worked example using three stations in Fennoscandia—Onsala (Sweden), Kiruna (Sweden), and Metz (Finland)—to quantify hydrology loading effects on vertical land motion and clock measurements.
- Comparison of three hydrological models for the example: ERA5, GLDAS/Noah v2.0 (GLDAS2), and MERRA-2; the paper also discusses validating optical clocks with a precise leveling baseline of tens of meters and a height difference of a few meters.
## Limitations
- The paper explicitly notes that practical validation methods such as using precise leveling benchmarks across long distances are not accurate to the millimeter/submillimeter level because of error sources including GNSS measurements, spirit leveling, and geoid models.
- The authors state that hydrology loading effects depend on the chosen model and time period, and that these effects should be considered if relativistic geodesy is repeated at different times; this is an evident limitation of transferability across epochs and models.
- Not stated in the paper.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
15 Valid · 2 Not valid · 12 Not checked · 17 Own results and interpretations
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“It is important to mention that the VLBI method is not the best in a short average period due to its low sampling rate (see Takiguchi et al. (2007); Rieck et al. (2010a); Hobiger et al. (2015).”
What the sources say
- Partly supportedcites Takiguchi et al. (2007)Experimental — accuracy not yet measured
Takiguchi et al. (2007) confine VLBI's demonstrated advantage to longer averaging times: the Abstract and Conclusions state that 'the Allan deviation showed that VLBI time transfer is more stable than GPS time transfer between 2000 seconds to 60000 seconds', with clock offsets estimated only every one hour in the CALC/SOLVE analysis, and section 3.2.1/3.2.2 likewise restrict the claim to 3600-60000 s. That supports the 'not the best in a short average period' half of the claim by implication, but no passage of our copy gives the stated REASON: nothing attributes the short-period weakness to a low sampling rate. The 'Residuals plus Clock Offsets' section only notes that the delay-residual data are obtained 'from every scan' and 'is not equal interval', so they interpolated it (every 60 seconds) to compute the Allan deviation, and that VLBI stability changed from stable to unstable between 1000 and 2000 seconds — a description of sparse, uneven sampling, not a causal explanation of poor short-term performance. (LLM, conf=0.70)
- Not matchedcites Rieck et al. (2010a)
Couldn’t be matched to a paper in Crossref, so it can’t be checked.
- Supportedcites Hobiger et al. (2015) source
The Introduction states that VLBI’s low data sampling rate limits its use for shorter averaging periods and that it cannot match GPS’s short-term capabilities. Section 4.1 likewise says its sparse sampling prevents sufficiently dense clock estimates for shorter averaging periods. (LLM, conf=0.94)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“This method, due to the error sources mentioned in Denker et al. (2018) such as uncertainties because of utilizing GNSS measurements, sprite leveling, geoid models, etc., is not accurate to millimeter/ submillimeter level.”
What the sources say
- Partly supportedcites Denker et al. (2018) sourceExperimental — accuracy not yet measured
Section 5 (page unavailable) reports centimetre-to-decimetre discrepancies between geodetic approaches over long distances and identifies systematic levelling error as a likely major contributor; it says GNSS plays only a minor role. Appendix 3 recommends millimetre-uncertainty levelling for local clock comparisons, so the blanket accuracy claim needs a distance qualifier. The passages do not describe this as a method for validating optical-fibre link performance. (LLM, conf=0.85)
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“Using an integration time of 1 day, an uncertainty of 10 -15 can result from evaluating the satellite signal ' s carrier phase.”
What the sources say
- Partly supportedcites Pizzocaro et al., 2020 sourceExperimental — accuracy not yet measured
The section discussing VLBI and satellite links (page unavailable) reports that GPS-based IPPP had an uncertainty of 9 × 10^-16 after one day, supporting the claimed scale and integration time. Our copy does not say that this result came from evaluating the satellite signal’s carrier phase; it describes the method as precise point positioning with integer ambiguity resolution. (LLM, conf=0.82)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
Every source the paper cites for this claim was checked and supports it.
In the paper
“The redshift is related to the gravitational potential difference where a fractional frequency shift of 10 -18 corresponds to a height difference of 1 cm at or near the Earth ' s surface (Mehlstäubler et al., 2018).”
What the sources say
- Supportedcites Mehlstäubler et al., 2018 source
The Introduction (p. 2) states that a fractional frequency shift of 10^-18 corresponds to a potential difference equivalent to 1 cm in height on Earth’s surface. Section 2.4 (p. 14) repeats the equivalence for earthbound stations. (LLM, conf=0.95)
plainstates an association- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
Every source the paper cites for this claim was checked and supports it.
In the paper
“Pizzocaro et al. (2020) showed that it is possible to reach 10 -17 uncertainty level.”
What the sources say
- Supportedcites Pizzocaro et al. (2020) source
The section ‘Uncertainty of the optical clocks, optical link and combs’ (page unavailable) reports systematic-shift uncertainties of 3.1 × 10⁻¹⁷ and 8 × 10⁻¹⁷ for the two clocks in this campaign. These results support the stated possibility of reaching a 10⁻¹⁷ uncertainty level for the clocks. (LLM, conf=0.90)
boosted- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Rests on an assumption not shown here.
- Supported
15 more claims
Create a free account to see all 46 claims and to verify the 2 references still open.
- Probably not a substantial claim. 20
- It may state two separate claims as one. 11
Citations
Cites
The Modern-Era Retrospective Analysis for Research and Applications, Version 2 (MERRA-2)
Gelaro, R., McCarty, W., Suárez, M. J., Todling, R., Molod, A., Takacs, L., Randles, C. A., Darmenov, A., Bosilovich, M. G., Reichle, R., et al. (2017) · Journal of Climate · doi:10.1175/jcli-d-16-0758.1 · Cited by 9,010 · cited 2×
“, 2019; Haas, 2020). Time and frequency within the VLBI method have been presented in detail by Rieck et al. (2010b). Using the VLBI approach, the stability of time transfer can be assessed by other methods (see Figure 2) such as GPS common view (GPS CV) method (cf.”
BackgroundMethodLudlow, A. D., Boyd, M. M., Ye, J., Peik, E., & Schmidt, P. O. (2015) · Reviews of Modern Physics · doi:10.1103/revmodphys.87.637 · Cited by 2,385
Space geodesy constrains ice age terminal deglaciation: The global ICE‐6G_C (VM5a) model
Peltier, W. R., Argus, D. F., & Drummond, R. (2015) · Journal of Geophysical Research: Solid Earth · doi:10.1002/2014jb011176 · Cited by 1,470 · cited 3×
“Figure 3 shows the gravitational potential effect due to GIA using ICE-6G (VM5a) land uplift model (Peltier et al., 2015). The results illustrate that the GIA effect varies between 0.009 and −0.001 m(2)/s(2)/yr with a mean value of 0.0003 m(2)/s(2)/yr and a standard deviation of 0.001 m(2)/s(2)/yr. Moreover, dominant…”
MethodInfluentialSpringer Handbook of Global Navigation Satellite Systems
(2017) · Springer eBooks · doi:10.1007/978-3-319-42928-1 · Cited by 1,466
An optical lattice clock with accuracy and stability at the 10−18 level
Bloom, B. J., Nicholson, T. L., Williams, J. R., Campbell, S. L., Bishof, M., Zhang, X., Zhang, W., Bromley, S. L., & Ye, J. (2014) · Nature · doi:10.1038/nature12941 · Cited by 1,073 · cited 1×
“Bloom et al. (2014) demonstrated an atomic clock with a many-atom system that reaches an accuracy of 6×10−18 and could improve the accuracy of optical lattice clocks by a factor of 22.”
BackgroundFrequency Comparison of Two High-Accuracy Al + Optical Clocks
Chou, C., Hume, D., Koelemeij, J., Wineland, D., & Rosenband, T. (2010) · Physical Review Letters · doi:10.1103/physrevlett.104.070802 · Cited by 903
Takamoto, M., Hong, F.-L., Higashi, R., & Katori, H. (2005) · Nature · doi:10.1038/nature03541 · Cited by 853
An Atomic Clock with 10 –18 Instability
Hinkley, N., Sherman, J. A., Phillips, N. B., Schioppo, M., Lemke, N. D., Beloy, K., Pizzocaro, M., Oates, C. W., & Ludlow, A. D. (2013) · Science · doi:10.1126/science.1240420 · Cited by 817
Systematic evaluation of an atomic clock at 2 × 10−18 total uncertainty
Nicholson, T. L., Campbell, S. L., Hutson, R. B., Marti, G. E., Bloom, B. J., McNally, R. L., Zhang, W., Barrett, M. D., Safronova, M. S., Strouse, G. F., et al. (2015) · Nature Communications · doi:10.1038/ncomms7896 · Cited by 780
Atomic clock performance enabling geodesy below the centimetre level
McGrew, W. F., Zhang, X., Fasano, R. J., Schäffer, S. A., Beloy, K., Nicolodi, D., Brown, R. C., Hinkley, N., Milani, G., Schioppo, M., et al. (2018) · Nature · doi:10.1038/s41586-018-0738-2 · Cited by 727 · cited 2×
“There are three important parameters and quantities in the atomic clocks, namely, the uncertainty (or accuracy), instability (statistical uncertainty) and reproducibility, that are important for clock-based geodesy applications (McGrew et al., 2018).”
BackgroundMethodSingle-Ion Atomic Clock with 3 × 10 − 18 Systematic Uncertainty
Huntemann, N., Sanner, C., Lipphardt, B., Tamm, C., & Peik, E. (2016) · Physical Review Letters · doi:10.1103/physrevlett.116.063001 · Cited by 677
A 920-Kilometer Optical Fiber Link for Frequency Metrology at the 19th Decimal Place
Predehl, K., Grosche, G., Raupach, S. M. F., Droste, S., Terra, O., Alnis, J., Legero, T., Hänsch, T. W., Udem, T., Holzwarth, R., et al. (2012) · Science · doi:10.1126/science.1218442 · Cited by 543 · cited 2×
“Millimeter/ submillimeter level of accuracy (order of 10 and 10) is claimed in Raupach and Grosche, (2014); Raupach et al.”
BackgroundA clock network for geodesy and fundamental science
Lisdat, C., Grosche, G., Quintin, N., Shi, C., Raupach, S. M. F., Grebing, C., Nicolodi, D., Stefani, F., Al-Masoudi, A., Dörscher, S., et al. (2016) · Nature Communications · doi:10.1038/ncomms12443 · Cited by 460 · cited 1×
“Currently, there are some optical clock network projects, such as Paris and Braunschweig’s network based on using 1,415 km of telecom fiber (Lisdat et al., 2016) of which the accuracy is studied by Lisdat et al.”
BackgroundAccurate Time and Frequency Transfer During Common-View of a GPS Satellite
Allan, D. W., & Weiss, M. A. (1980) · 34th Annual Symposium on Frequency Control · doi:10.1109/freq.1980.200424 · Cited by 429 · cited 5×
“Allan and Weiss, 1980). The stability of the VLBI frequency link between the station clocks has been studied in different projects, e.g., by Rieck et al. (2010a) in Onsala Space Observatory in Sweden, Wang et al. (2019) in Kunming-Urumqi baseline in China, and Pizzocaro et al. (2020) in Italy and Japan (see also Bouma…”
BackgroundMethodInfluentialSoffel, M., Klioner, S. A., Petit, G., Wolf, P., Kopeikin, S. M., Bretagnon, P., Brumberg, V. A., Capitaine, N., Damour, T., Fukushima, T., et al. (2003) · The Astronomical Journal · doi:10.1086/378162 · Cited by 392
High-stability transfer of an optical frequency over long fiber-optic links
Williams, P. A., Swann, W. C., & Newbury, N. R. (2008) · Journal of the Optical Society of America B · doi:10.1364/josab.25.001284 · Cited by 385 · cited 1×
“, 2009) and a 251 km long fiber optic link in the US (Williams et al., 2008).”
BackgroundA Modified "Allan Variance" with Increased Oscillator Characterization Ability
Allan, D. W., & Barnes, J. A. (1981) · Thirty Fifth Annual Frequency Control Symposium · doi:10.1109/freq.1981.200514 · Cited by 270
Riehle, F. (2017) · Nature Photonics · doi:10.1038/nphoton.2016.235 · Cited by 264 · cited 9×
“They used two generations of Sr-lattice clocks to demonstrate the improved performance of lattice clocks and analyzed both uncertainty and instability of clocks by investigating the Allan deviation parameter (cf. Riehle, 2017).”
BackgroundMethodInfluentialMehlstäubler, T. E., Grosche, G., Lisdat, C., Schmidt, P. O., & Denker, H. (2018) · Reports on Progress in Physics · doi:10.1088/1361-6633/aab409 · Cited by 263 · cited 2×
“In other words, the ADEV determines the theoretical prediction of the frequency instability (Mehlstäubler et al., 2018).”
BackgroundExperimental realization of an optical second with strontium lattice clocks
Le Targat, R., Lorini, L., Le Coq, Y., Zawada, M., Guéna, J., Abgrall, M., Gurov, M., Rosenbusch, P., Rovera, D. G., Nagórny, B., et al. (2013) · Nature Communications · doi:10.1038/ncomms3109 · Cited by 250 · cited 4×
“(2005), Riehle, (2017), Lombardi, (2012) and McGrew et al.”
BackgroundInfluentialGeopotential measurements with synchronously linked optical lattice clocks
Takano, T., Takamoto, M., Ushijima, I., Ohmae, N., Akatsuka, T., Yamaguchi, A., Kuroishi, Y., Munekane, H., Miyahara, B., & Katori, H. (2016) · Nature Photonics · doi:10.1038/nphoton.2016.159 · Cited by 245
Transportable Optical Lattice Clock with 7 × 10 − 17 Uncertainty
Koller, S. B., Grotti, J., Vogt, S., Al-Masoudi, A., Dörscher, S., Häfner, S., Sterr, U., & Lisdat, C. (2017) · Physical Review Letters · doi:10.1103/physrevlett.118.073601 · Cited by 238
Ultra-stable long distance optical frequency distribution using the Internet fiber network
Lopez, O., Haboucha, A., Chanteau, B., Chardonnet, C., Amy-Klein, A., & Santarelli, G. (2012) · Optics Express · doi:10.1364/oe.20.023518 · Cited by 175
Bjerhammar, A. (1985) · Bulletin Géodésique · doi:10.1007/bf02520327 · Cited by 165 · cited 1×
“Later, he introduced the idea of relativistic geodesy (see Bjerhammar, 1985).”
BackgroundMeasuring the frequency of a Sr optical lattice clock using a 120 km coherent optical transfer
Hong, F.-L., Musha, M., Takamoto, M., Inaba, H., Yanagimachi, S., Takamizawa, A., Watabe, K., Ikegami, T., Imae, M., Fujii, Y., et al. (2009) · Optics Letters · doi:10.1364/ol.34.000692 · Cited by 113 · cited 3×
“The stability of the VLBI frequency link between the station clocks has been studied in different projects, e.g., by Rieck et al. (2010a) in Onsala Space Observatory in Sweden, Wang et al. (2019) in Kunming-Urumqi baseline in China, and Pizzocaro et al. (2020) in Italy and Japan (see also Bouman, 2012).”
BackgroundRelativistic reference systems and motion of test bodies in the vicinity of the earth
Brumberg, V. A., & Kopejkin, S. M. (1989) · Il Nuovo Cimento B · doi:10.1007/bf02888894 · Cited by 105
Raupach, S. M. F., Koczwara, A., & Grosche, G. (2015) · Physical Review A · doi:10.1103/physreva.92.021801 · Cited by 101 · cited 2×
“, Takamoto et al. (2005), Riehle, (2017), Lombardi, (2012) and McGrew et al.”
BackgroundA conventional value for the geoid reference potential $$W_{0}$$ W 0
Sánchez, L., Čunderlík, R., Dayoub, N., Mikula, K., Minarechová, Z., Šíma, Z., Vatrt, V., & Vojtíšková, M. (2016) · Journal of Geodesy · doi:10.1007/s00190-016-0913-x · Cited by 98
Denker, H., Timmen, L., Voigt, C., Weyers, S., Peik, E., Margolis, H. S., Delva, P., Wolf, P., & Petit, G. (2018) · Journal of Geodesy · doi:10.1007/s00190-017-1075-1 · Cited by 91 · cited 5×
“Denker et al. (2018) proposed a method to utilize precise levelling benchmarks in France and Germany to validate the performance of the optical fiber link between points in the two countries. This method, due to the error sources mentioned in Denker et al. (2018) such as uncertainties because of utilizing GNSS measure…”
BackgroundMethodInfluentialNoise and instability of an optical lattice clock
Al-Masoudi, A., Dörscher, S., Häfner, S., Sterr, U., & Lisdat, C. (2015) · Physical Review A · doi:10.1103/physreva.92.063814 · Cited by 84
High Performance Clocks and Gravity Field Determination
Müller, J., Dirkx, D., Kopeikin, S. M., Lion, G., Panet, I., Petit, G., & Visser, P. N. A. M. (2018) · Space Science Reviews · doi:10.1007/s11214-017-0431-z · Cited by 81 · cited 1×
“Recently, the atomic clocks have been used for geodetic proposes after the abovementioned optical clocks developments (see Denker et al., 2018; Müller et al., 2018).”
MethodGravity Inversion and Integration
Sjöberg, L. E., & Bagherbandi, M. (2017) · doi:10.1007/978-3-319-50298-4 · Cited by 80 · cited 1×
“…P and Q can be calculated using the general theory of relativity and frequency measurements obtained from atomic clocks, with the following formula [Sjöberg and Bagherbandi (2017), Chapter 7]: WP −WQ ≈ fΔf f2Q c2 ≈ Δf f c2 (3) where Δf fP − fQ , f (fP + fQ)/2 and c is the speed of the light in…”
MethodSelf-citationBondarescu, R., Bondarescu, M., Hetényi, G., Boschi, L., Jetzer, P., & Balakrishna, J. (2012) · Geophysical Journal International · doi:10.1111/j.1365-246x.2012.05636.x · Cited by 71 · cited 1×
“Recently, because of the rapid development of optical atomic clocks, it has become possible to determine the geopotential values with high accuracy using optical clock network data (Bondarescu et al., 2012; Riehle, 2017).”
MethodRadio-source positions from VLBI
Ma, C., Clark, T. A., Ryan, J., et al. (1986) · The Astronomical Journal · doi:10.1086/114232 · Cited by 68
Intercontinental comparison of optical atomic clocks through very long baseline interferometry
Pizzocaro, M., Sekido, M., Takefuji, K., Ujihara, H., Hachisu, H., Nemitz, N., Tsutsumi, M., Kondo, T., Kawai, E., Ichikawa, R., et al. (2021) · Nature Physics · doi:10.1038/s41567-020-01038-6 · Cited by 64
Relativistic Theory of Celestial Reference Frames
Brumberg, V. A., & Kopejkin, S. M. (1989) · Astrophysics and Space Science Library · doi:10.1007/978-94-009-0933-5_6 · Cited by 53
Voigt, C., Denker, H., & Timmen, L. (2016) · Metrologia · doi:10.1088/0026-1394/53/6/1365 · Cited by 50 · cited 2×
“01 m(2)/s(2)/yr and a secular dominant time scale between laboratory sites over continental scales (Voigt et al., 2016).”
BackgroundTime and frequency :: theory and fundamentals
Blair, B. E. (1974) · doi:10.6028/nbs.mono.140 · Cited by 50
Short‐term GNSS satellite clock stability
Griggs, E., Kursinski, E. R., & AKOS, D. M. (2015) · Radio Science · doi:10.1002/2015rs005667 · Cited by 40 · cited 3×
“It is worth mentioning that the ADEV cannot distinguish the white phase noise from flicker phase noise, and hence one should use the modified Allan variance (Griggs et al., 2015).”
MethodInfluentialAtomic clocks: new prospects in metrology and geodesy
Delva, P., & Lodewyck, J. (2013) · arXiv · doi:10.48550/arxiv.1308.6766 · Cited by 40
Relativistic time scales in the solar system
Brumberg, V. A., & Kopeikin, S. M. (1990) · Celestial Mechanics and Dynamical Astronomy · doi:10.1007/bf00050674 · Cited by 38
Chirped frequency transfer: A tool for synchronization and time transfer
Raupach, S. M. F., & Grosche, G. (2014) · IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control · doi:10.1109/tuffc.2014.2988 · Cited by 32
Akatsuka, T., Ono, H., Hayashida, K., Araki, K., Takamoto, M., Takano, T., & Katori, H. (2014) · Japanese Journal of Applied Physics · doi:10.7567/jjap.53.032801 · Cited by 30
Evaluating the Frequency and Time Uncertainty of GPS Disciplined Oscillators and Clocks
Lombardi, M. A. (2016) · NCSLI Measure · doi:10.1080/19315775.2017.1316696 · Cited by 29
Amin, H., Sjöberg, L. E., & Bagherbandi, M. (2019) · Journal of Geodesy · doi:10.1007/s00190-019-01293-3 · Cited by 19 · cited 1×
“03) × 10(6) m(3)s according to Amin et al. (2019) and R is the Earth’s mean radius.”
BackgroundSelf-citationDiscrete solutions of the boundary value problem in physical geodesy
Bjerhammar, A. (1975) · Tellus A: Dynamic Meteorology and Oceanography · doi:10.3402/tellusa.v27i2.9892 · Cited by 13 · cited 10×
“This method was proposed for the first time by Bjerhammar, (1975). Later, he introduced the idea of relativistic geodesy (see Bjerhammar, 1985). Vermeer, (1983), who introduced chronometric leveling, also studied relativistic geodesy (see also Delva and Lodewyck, 2013). This novel approach helps determine the potentia…”
MethodInfluentialCombining GPS and VLBI for inter-continental frequency transfer
Hobiger, T., Rieck, C., Haas, R., & Koyama, Y. (2015) · Metrologia · doi:10.1088/0026-1394/52/2/251 · Cited by 12 · cited 1×
“It is important to mention that the VLBI method is not the best in a short average period due to its low sampling rate (see Takiguchi et al. (2007); Rieck et al. (2010a); Hobiger et al. (2015).”
Bouman, J. (2011) · Journal of Geodesy · doi:10.1007/s00190-011-0520-9 · Cited by 10 · cited 1×
“…of the VLBI frequency link between the station clocks has been studied in different projects, e.g., by Rieck et al. (2010a) in Onsala Space Observatory in Sweden, Wang et al. (2019) in Kunming-Urumqi baseline in China, and Pizzocaro et al. (2020) in Italy and Japan (see also Bouman, 2012).”
BackgroundPetrov, A. A., Davydov, V. V., Zalyotov, D. V., et al. (2018) · Journal of Physics Conference Series · doi:10.1088/1742-6596/1124/4/041004 · Cited by 9 · cited 2×
“(2005), Riehle, (2017), Lombardi, (2012) and McGrew et al.”
BackgroundVLBI time-transfer using CONT08 data
Rieck, C., Haas, R., Jaldehag, K., & Johansson, J. (2010) · European Frequency and Time Forum · doi:10.1109/eftf.2010.6533654 · Cited by 9 · cited 3×
“The stability of the VLBI frequency link between the station clocks has been studied in different projects, e.g., by Rieck et al. (2010a) in Onsala Space Observatory in Sweden, Wang et al. (2019) in Kunming-Urumqi baseline in China, and Pizzocaro et al. (2020) in Italy and Japan (see also Bouman,…”
MethodVLBI and GPS-based Time-transfer Using CONT08 Data
Rieck, C., Haas, R., Jaldehag, R. T. K., & Johansson, J. M. (2010) · NASA STI Repository (National Aeronautics and Space Administration) · Cited by 7
(2007) · Tuwhera (Auckland University of Technology) · Cited by 6
Comparison of VLBI and GNSS common view for time transfer
Wang, P., Wang, G., Gao, Y., Cai, H., & Liu, N. (2019) · International Journal of Metrology and Quality Engineering · doi:10.1051/ijmqe/2019014 · Cited by 4 · cited 1×
“The time delay is affected by the offset of the reference clocks in each observatory, the cable instrumental delay, and the tropospheric and ionospheric atmosphere propagation delays (cf. Ma et al., 1986; Wang et al., 2019).”
BackgroundThe evolution of time measurement, Part 4: the atomic second [Recalibration]
Lombardi, M. A. (2012) · IEEE Instrumentation & Measurement Magazine · doi:10.1109/mim.2012.6145262 · Cited by 4 · cited 2×
“The first generation of atomic clocks have a special microwave range frequency (generated, e.g., by the transformation of quartz oscillation) and an atomic feedback loop to correct the oscillator when it deviates from its predefined frequency (see, e.g., Lombardi (2012); Figure 2).”
BackgroundRecent Improvements in NIST-Fl and Resulting Accuracies of ¿f/f<7ձ0¿l6
Heavner, T. P., Jefferts, S. R., Donley, E. A., Shirley, J. H., & Parker, T. E. (2004) · Conference on Precision Electromagnetic Measurements · doi:10.1109/cpem.2004.305330 · Cited by 4
CHAMP-, GRACE-, GOCE-Satellite Projects
Pail, R. (2014) · Springer eBooks · doi:10.1007/978-3-319-02370-0_29-1 · Cited by 4
Optical atomic clocks: a revolution in performance
Hollberg, L. W. (2005) · Conference on Lasers and Electro-Optics · doi:10.1109/cleo.2005.202086 · Cited by 3 · cited 2×
“The system needs a third component, which records the total number of oscillations of the clock oscillator laser using an optical frequency counter Hollberg, (2005), Le Targat et al. (2013). Since the 1980s, the uncertainty and stability of optical atomic clocks have gradually improved, with the current level of accur…”
MethodClock comparison using black holes
Haas, R. (2021) · Nature Physics · doi:10.1038/s41567-020-01071-5 · Cited by 2 · cited 1×
“Hence, the VLBI technique can be used for time transfer and relativistic geodesy applications (cf.Wang et al., 2019; Haas, 2020).”
MethodAkatsuka, T., Ono, H., Hayashida, K., Araki, K., Takamoto, M., Takano, T., & Katori, H. (2013) · Joint Conference of the European Frequency and Time Forum and IEEE International Frequency Control Symposium (EFTF/IFCS) · doi:10.1109/eftf-ifc.2013.6702148 · Cited by 1
Research works printed but not linked: 4
- Hersbach, 2016, ERA5 reanalysis is in production
- 2008, Evaluation of measurement data—guide to the expression of uncertainty in measurement
- Rodell, 2004, NASA/NOAA’s global land data assimilation system (GLDAS): Recent results and future plans, 61
- Vermeer, 1983, Chronometric levelling
Cited by
Cascaded quantum time transfer bypassing the no-cloning barrier
Hong, H., Xiao, X., Quan, R., et al. (2026) · Science China Physics Mechanics and Astronomy · doi:10.1007/s11433-025-2781-4 · Cited by 2
Modeling and Noise Impact Analysis of Electro-Optic Comb Time and Frequency Transfer System
Liang, W., Zhang, J., Zou, Y. H., et al. (2025) · doi:10.1109/acp66871.2025.11350515
Metadata
- Authors
- Bagherbandi, M., Shirazian, M., Amin, H., & Horemuz, M.
- Affiliations
- University of Gävle (SE)
- Shahid Rajaee Teacher Training University (IR)
- Corresponding author
- Bagherbandi, Mohammad
- Venue
- Frontiers in Earth Science
- Publisher
- Frontiers Media SA
- Published
- 2023-06-05
- Volume
- 11
- ISSN
- 2296-6463 (ISSN-L)
- OpenAlex
- W4379470060
- Semantic Scholar
- 1e8b648ed00556c2d6abe3366d6c012eba1f011f
- Cited by
- 2
- References
- 61
- Citations by year
- 2026: 1 · 2025: 1
- FWCI
- 0.27
- Type
- journal article
- Language
- en
- Open access
- gold
- dx.doi.org
- Licence
- Locations
- Frontiers in Earth Science (publishedVersion, cc-by)
- Diva portal (Dalarna University Library) (submittedVersion, other-oa)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Topics
- Physical Sciences › Earth and Planetary Sciences › Geophysics › Geophysics and Gravity Measurements
- Physical Sciences › Physics and Astronomy › Atomic and Molecular Physics, and Optics › Advanced Frequency and Time Standards
- Physical Sciences › Engineering › Aerospace Engineering › GNSS positioning and interference
- Keywords
- relativistic geodesy, optical atomic clocks, clock distribution, gravity field, vertical datum unification, height systems, vertical land motion, time transfer
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (qwen3.8-omni-flash and gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.