The DOI matches its Crossref record; 113 of the 113 references it cites were found in a registry or an index.
Pre-Lithiation Strategies for Rechargeable Energy Storage Technologies: Concepts, Promises and Challenges
Open accessAbstract
In order to meet the sophisticated demands for large-scale applications such as electro-mobility, next generation energy storage technologies require advanced electrode active materials with enhanced gravimetric and volumetric capacities to achieve increased gravimetric energy and volumetric energy densities. However, most of these materials suffer from high 1st cycle active lithium losses, e.g., caused by solid electrolyte interphase (SEI) formation, which in turn hinder their broad commercial use so far. In general, the loss of active lithium permanently decreases the available energy by the consumption of lithium from the positive electrode material. Pre-lithiation is considered as a highly appealing technique to compensate for active lithium losses and, therefore, to increase the practical energy density. Various pre-lithiation techniques have been evaluated so far, including electrochemical and chemical pre-lithiation, pre-lithiation with the help of additives or the pre-lithiation by direct contact to lithium metal. In this review article, we will give a comprehensive overview about the various concepts for pre lithiation and controversially discuss their advantages and challenges. Furthermore, we will critically discuss possible effects on the cell performance and stability and assess the techniques with regard to their possible commercial exploration.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Materials for electrochemical capacitors
Simon, P., & Gogotsi, Y. (2008) · Nature Materials · doi:10.1038/nmat2297 · Cited by 16,427
What are batteries, fuel cells, and supercapacitors?
Winter, M., & Brodd, R. J. (2004) · Chemical Reviews · doi:10.1021/cr020730k · Cited by 7,389
Self-citationSodium-ion batteries: present and future
Hwang, J.-Y., Myung, S.-T., & Sun, Y.-K. (2017) · Chemical Society Reviews · doi:10.1039/c6cs00776g · Cited by 5,305
Electrochemical Capacitors for Energy Management
Miller, J. R., & Simon, P. (2008) · Science · doi:10.1126/science.1158736 · Cited by 4,831
Rechargeable Lithium–Sulfur Batteries
Manthiram, A., Fu, Y., Chung, S.-H., Zu, C., & Su, Y.-S. (2014) · Chemical Reviews · doi:10.1021/cr500062v · Cited by 4,665
Ageing mechanisms in lithium-ion batteries
Vetter, J., Novák, P., Wagner, M. R., Veit, C., Möller, K.-C., Besenhard, J. O., Winter, M., Wohlfahrt-Mehrens, M., Vogler, C., & Hammouche, A. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.01.006 · Cited by 3,987
Self-citationPerformance and cost of materials for lithium-based rechargeable automotive batteries
Schmuch, R., Wagner, R., Hörpel, G., Placke, T., & Winter, M. (2018) · Nature Energy · doi:10.1038/s41560-018-0107-2 · Cited by 3,233
Self-citationA review of the features and analyses of the solid electrolyte interphase in Li-ion batteries
Verma, P., Maire, P., & Novák, P. (2010) · Electrochimica Acta · doi:10.1016/j.electacta.2010.05.072 · Cited by 2,903
Alloy Negative Electrodes for Li-Ion Batteries
Obrovac, M. N., & Chevrier, V. L. (2014) · Chemical Reviews · doi:10.1021/cr500207g · Cited by 2,175
An, S. J., Li, J., Daniel, C., Mohanty, D., Nagpure, S., & Wood, D. L. (2016) · Carbon · doi:10.1016/j.carbon.2016.04.008 · Cited by 2,121
The development and future of lithium ion batteries
Blomgren, G. E. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.0251701jes · Cited by 1,940
Silicon based lithium-ion battery anodes: A chronicle perspective review
Zuo, X., Zhu, J., Müller-Buschbaum, P., & Cheng, Y.-J. (2017) · Nano Energy · doi:10.1016/j.nanoen.2016.11.013 · Cited by 1,478
An Asymmetric Hybrid Nonaqueous Energy Storage Cell
Amatucci, G. G., Badway, F., Pasquier, A. D., & Zheng, T. (2001) · Journal of The Electrochemical Society · doi:10.1149/1.1383553 · Cited by 1,191
Odyssey of Multivalent Cathode Materials: Open Questions and Future Challenges
Canepa, P., Sai Gautam, G., Hannah, D. C., Malik, R., Liu, M., Gallagher, K. G., Persson, K. A., & Ceder, G. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00614 · Cited by 1,159
Placke, T., Kloepsch, R., Dühnen, S., & Winter, M. (2017) · Journal of Solid State Electrochemistry · doi:10.1007/s10008-017-3610-7 · Cited by 1,117
Self-citationR&D considerations for the performance and application of electrochemical capacitors
Burke, A. (2007) · Electrochimica Acta · doi:10.1016/j.electacta.2007.01.011 · Cited by 1,005
Layered vanadium and molybdenum oxides: batteries and electrochromics
Chernova, N. A., Roppolo, M., Dillon, A. C., & Whittingham, M. S. (2009) · Journal of Materials Chemistry · doi:10.1039/b819629j · Cited by 874
Winter, M. (2009) · Zeitschrift für Physikalische Chemie · doi:10.1524/zpch.2009.6086 · Cited by 807
Self-citationFuture generations of cathode materials: an automotive industry perspective
Andre, D., Kim, S.-J., Lamp, P., Lux, S. F., Maglia, F., Paschos, O., & Stiaszny, B. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta00361j · Cited by 806
Towards a calcium-based rechargeable battery
Ponrouch, A., Frontera, C., Bardé, F., & Palacín, M. R. (2016) · Nature Materials · doi:10.1038/nmat4462 · Cited by 794
Second generation ‘nanohybrid supercapacitor’: Evolution of capacitive energy storage devices
Naoi, K., Ishimoto, S., Miyamoto, J.-I., & Naoi, W. (2012) · Energy & Environmental Science · doi:10.1039/c2ee21675b · Cited by 728
Zheng, H., Li, J., Song, X., Liu, G., & Battaglia, V. S. (2012) · Electrochimica Acta · doi:10.1016/j.electacta.2012.03.161 · Cited by 674
New Nanostructured Li2S/Silicon Rechargeable Battery with High Specific Energy
Yang, Y., McDowell, M. T., Jackson, A., Cha, J. J., Hong, S. S., & Cui, Y. (2010) · Nano Letters · doi:10.1021/nl100504q · Cited by 653
Hagen, M., Hanselmann, D., Ahlbrecht, K., Maça, R., Gerber, D., & Tübke, J. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201401986 · Cited by 636
Du Pasquier, A., Plitz, I., Menocal, S., & Amatucci, G. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00718-8 · Cited by 588
Lithiated MoO3 Nanobelts with Greatly Improved Performance for Lithium Batteries
Mai, L. Q., Hu, B., Chen, W., Qi, Y. Y., Lao, C. S., Yang, R. S., Dai, Y., & Wang, Z. L. (2007) · Advanced Materials · doi:10.1002/adma.200700883 · Cited by 588
Prelithiated Silicon Nanowires as an Anode for Lithium Ion Batteries
Liu, N., Hu, L., McDowell, M. T., Jackson, A., & Cui, Y. (2011) · ACS Nano · doi:10.1021/nn2017167 · Cited by 578
Kim, H. J., Choi, S., Lee, S. J., Seo, M. W., Lee, J. G., Deniz, E., Lee, Y. J., Kim, E. K., & Choi, J. W. (2016) · Nano Letters · doi:10.1021/acs.nanolett.5b03776 · Cited by 549
Understanding undesirable anode lithium plating issues in lithium-ion batteries
Liu, Q., Du, C., Shen, B., Zuo, P., Cheng, X., Ma, Y., Yin, G., & Gao, Y. (2016) · RSC Advances · doi:10.1039/c6ra19482f · Cited by 473
Aging mechanisms of lithium cathode materials
Wohlfahrt-Mehrens, M., Vogler, C., & Garche, J. (2004) · Journal of Power Sources · doi:10.1016/j.jpowsour.2003.09.034 · Cited by 470
A High‐Performance Polymer Tin Sulfur Lithium Ion Battery
Hassoun, J., & Scrosati, B. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.200907324 · Cited by 433
Ryou, M., Lee, Y. M., Lee, Y., Winter, M., & Bieker, P. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201402953 · Cited by 412
Self-citationTarascon, J. M., & Guyomard, D. (1991) · Journal of The Electrochemical Society · doi:10.1149/1.2085331 · Cited by 411
In situ detection of lithium metal plating on graphite in experimental cells
Uhlmann, C., Illig, J., Ender, M., Schuster, R., & Ivers-Tiffée, E. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.01.046 · Cited by 407
Stabilized Li3N for efficient battery cathode prelithiation
Sun, Y., Li, Y., Sun, J., Li, Y., Pei, A., & Cui, Y. (2017) · Energy Storage Materials · doi:10.1016/j.ensm.2016.10.004 · Cited by 402
High-capacity battery cathode prelithiation to offset initial lithium loss
Sun, Y., Lee, H.-W., Seh, Z. W., Liu, N., Sun, J., Li, Y., & Cui, Y. (2016) · Nature Energy · doi:10.1038/nenergy.2015.8 · Cited by 396
Wagner, R., Preschitschek, N., Passerini, S., Leker, J., & Winter, M. (2013) · Journal of Applied Electrochemistry · doi:10.1007/s10800-013-0533-6 · Cited by 395
Self-citationRothermel, S., Meister, P., Schmuelling, G., Fromm, O., Meyer, H.-W., Nowak, S., Winter, M., & Placke, T. (2014) · Energy & Environmental Science · doi:10.1039/c4ee01873g · Cited by 390
Self-citationZhao, J., Lu, Z., Liu, N., Lee, H.-W., McDowell, M. T., & Cui, Y. (2014) · Nature Communications · doi:10.1038/ncomms6088 · Cited by 384
Hybridization of rechargeable batteries and electrochemical capacitors: Principles and limits
Cericola, D., & Kötz, R. (2012) · Electrochimica Acta · doi:10.1016/j.electacta.2012.03.151 · Cited by 381
Forney, M. W., Ganter, M. J., Staub, J. W., Ridgley, R. D., & Landi, B. J. (2013) · Nano Letters · doi:10.1021/nl401776d · Cited by 381
Sivakkumar, S. R., & Pandolfo, A. G. (2012) · Electrochimica Acta · doi:10.1016/j.electacta.2012.01.076 · Cited by 371
Zhao, J., Lu, Z., Wang, H., Liu, W., Lee, H.-W., Yan, K., Zhuo, D., Lin, D., Liu, N., & Cui, Y. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b04526 · Cited by 369
Meister, P., Jia, H., Li, J., Kloepsch, R., Winter, M., & Placke, T. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b02895 · Cited by 364
Self-citationPlacke, T., Fromm, O., Lux, S. F., Bieker, P., Rothermel, S., Meyer, H.-W., Passerini, S., & Winter, M. (2012) · Journal of The Electrochemical Society · doi:10.1149/2.011211jes · Cited by 332
Self-citationWinter, M., Novák, P., & Monnier, A. (1998) · Journal of The Electrochemical Society · doi:10.1149/1.1838281 · Cited by 328
Self-citationAnode Improvement in Rechargeable Lithium–Sulfur Batteries
Tao, T., Lu, S., Fan, Y., Lei, W., Huang, S., & Chen, Y. (2017) · Advanced Materials · doi:10.1002/adma.201700542 · Cited by 304
Wang, X.-L., Han, W.-Q., Chen, H., Bai, J., Tyson, T. A., Yu, X.-Q., Wang, X.-J., & Yang, X.-Q. (2011) · Journal of the American Chemical Society · doi:10.1021/ja208880f · Cited by 303
Solid Electrolyte Interphase Growth and Capacity Loss in Silicon Electrodes
Michan, A. L., Divitini, G., Pell, A. J., Leskes, M., Ducati, C., & Grey, C. P. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b02882 · Cited by 277
Critical roles of binders and formulation at multiscales of silicon-based composite electrodes
Mazouzi, D., Karkar, Z., Reale Hernandez, C., Jimenez Manero, P., Guyomard, D., Roué, L., & Lestriez, B. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.01.140 · Cited by 242
Cao, W., & Zheng, J. P. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.04.033 · Cited by 241
In Situ Formed Lithium Sulfide/Microporous Carbon Cathodes for Lithium-Ion Batteries
Zheng, S., Chen, Y., Xu, Y., Yi, F., Zhu, Y., Liu, Y., Yang, J., & Wang, C. (2013) · ACS Nano · doi:10.1021/nn404601h · Cited by 230
The energy-storage frontier: Lithium-ion batteries and beyond
Crabtree, G., Kócs, E., & Trahey, L. (2015) · MRS Bulletin · doi:10.1557/mrs.2015.259 · Cited by 227
A Tutorial into Practical Capacity and Mass Balancing of Lithium Ion Batteries
Kasnatscheew, J., Placke, T., Streipert, B., Rothermel, S., Wagner, R., Meister, P., Laskovic, I. C., & Winter, M. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.0961712jes · Cited by 210
Self-citationCyclable Lithium and Capacity Loss in Li-Ion Cells
Christensen, J., & Newman, J. (2005) · Journal of The Electrochemical Society · doi:10.1149/1.1870752 · Cited by 208
Besenhard, J. O., & Winter, M. (2002) · ChemPhysChem · Cited by 201
Self-citationSchmitz, R. W., Murmann, P., Schmitz, R., Müller, R., Krämer, L., Kasnatscheew, J., Isken, P., Niehoff, P., Nowak, S., Röschenthaler, G.-V., et al. (2014) · Progress in Solid State Chemistry · doi:10.1016/j.progsolidstchem.2014.04.003 · Cited by 198
Self-citationω-LixV2O5 — a new electrode material for rechargeable lithium batteries
Delmas, C., Brethes, S., & Ménétrier, M. (1991) · Journal of Power Sources · doi:10.1016/0378-7753(91)85030-z · Cited by 196
Holtstiege, F., Wilken, A., Winter, M., & Placke, T. (2017) · Physical Chemistry Chemical Physics · doi:10.1039/c7cp05405j · Cited by 196
Self-citationCoated Lithium Powder (CLiP) Electrodes for Lithium‐Metal Batteries
Heine, J., Krüger, S., Hartnig, C., Wietelmann, U., Winter, M., & Bieker, P. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201300815 · Cited by 192
Self-citationCarbon‐Based Anodes for Lithium Sulfur Full Cells with High Cycle Stability
Brückner, J., Thieme, S., Böttger‐Hiller, F., Bauer, I., Grossmann, H. T., Strubel, P., Althues, H., Spange, S., & Kaskel, S. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201302169 · Cited by 184
Metallurgically lithiated SiO x anode with high capacity and ambient air compatibility
Zhao, J., Lee, H.-W., Sun, J., Yan, K., Liu, Y., Liu, W., Lu, Z., Lin, D., Zhou, G., & Cui, Y. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1603810113 · Cited by 182
A prelithiated carbon anode for lithium-ion battery applications
Jarvis, C. R., Lain, M. J., Yakovleva, M. V., & Gao, Y. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.07.051 · Cited by 175
Placke, T., Siozios, V., Schmitz, R., Lux, S. F., Bieker, P. M., Colle, C., Meyer, H.-W., Passerini, S., & Winter, M. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.10.085 · Cited by 172
Self-citationKrueger, S., Kloepsch, R., Li, J., Nowak, S., Passerini, S., & Winter, M. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.022304jes · Cited by 159
Self-citationHassoun, J., Kim, J., Lee, D.-J., Jung, H.-G., Lee, S.-M., Sun, Y.-K., & Scrosati, B. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.11.060 · Cited by 159
Studies on the Anode/Electrolyte Interfacein Lithium Ion Batteries
Winter, M., Appel, W. K., Evers, B., Hodal, T., Möller, K., Schneider, I., Wachtler, M., Wagner, M. R., Wrodnigg, G. H., & Besenhard, J. O. (2001) · Monatshefte für Chemie - Chemical Monthly · doi:10.1007/s007060170110 · Cited by 151
Self-citationOn the cycling stability of lithium-ion capacitors containing soft carbon as anodic material
Schroeder, M., Winter, M., Passerini, S., et al. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.04.045 · Cited by 149
Self-citationRechargeable lithium sulfide electrode for a polymer tin/sulfur lithium-ion battery
Hassoun, J., Sun, Y., & Scrosati, B. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.06.093 · Cited by 148
Best Practices for Mitigating Irreversible Capacity Loss of Negative Electrodes in Li‐Ion Batteries
Aravindan, V., Lee, Y., & Srinivasan, M. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602607 · Cited by 148
Zhang, J., Shi, Z., & Wang, C. (2014) · Electrochimica Acta · doi:10.1016/j.electacta.2014.01.040 · Cited by 138
A general prelithiation approach for group IV elements and corresponding oxides
Zhao, J., Sun, J., Pei, A., Zhou, G., Yan, K., Liu, Y., Lin, D., & Cui, Y. (2017) · Energy storage materials · doi:10.1016/j.ensm.2017.06.013 · Cited by 138
Agostini, M., Hassoun, J., Liu, J., Jeong, M., Nara, H., Momma, T., Ōsaka, T., Sun, Y., & Scrosati, B. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am4057166 · Cited by 137
Dual-ion Cells Based on Anion Intercalation into Graphite from Ionic Liquid-Based Electrolytes
Placke, T., Bieker, P. M., Lux, S. F., Fromm, O., Meyer, H., Passerini, S., & Winter, M. (2012) · Zeitschrift für Physikalische Chemie · doi:10.1524/zpch.2012.0222 · Cited by 131
Self-citationA new strategy to mitigate the initial capacity loss of lithium ion batteries
Su, X., Lin, C., Wang, X. P., Maroni, V. A., Ren, Y., Johnson, C. S., & Lu, W. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.05.063 · Cited by 130
Lithium Sulfide/Metal Nanocomposite as a High‐Capacity Cathode Prelithiation Material
Sun, Y., Lee, H., Seh, Z. W., Zheng, G. W., Sun, J., Li, Y., & Cui, Y. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600154 · Cited by 126
Synergistic Effect of Blended Components in Nonaqueous Electrolytes for Lithium Ion Batteries
Cekić-Lasković, I., von Aspern, N., Imholt, L., Kaymaksiz, S., Oldiges, K., Rad, B. R., & Winter, M. (2017) · Topics in Current Chemistry · doi:10.1007/s41061-017-0125-8 · Cited by 122
Self-citationSBR–PVDF based binder for the application of SLMP in graphite anodes
Wang, L., Fu, Y., Battaglia, V., & Liu, G. (2013) · RSC Advances · doi:10.1039/c3ra42773k · Cited by 111
Role of Li6CoO4Cathode Additive in Li-Ion Cells Containing Low Coulombic Efficiency Anode Material
Noh, M., & Cho, J. (2012) · Journal of The Electrochemical Society · doi:10.1149/2.085208jes · Cited by 111
Hybrid lithium-ion capacitors with asymmetric graphene electrodes
Sun, Y., Tang, J., Qin, F., Yuan, J., Zhang, K., Li, J., Zhu, D., & Qin, L. C. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta01113j · Cited by 110
Li2O Removal from Li5FeO4: A Cathode Precursor for Lithium-Ion Batteries
Johnson, C. S., Kang, S.-H., Vaughey, J. T., Pol, S. V., Balasubramanian, M., & Thackeray, M. M. (2010) · Chemistry of Materials · doi:10.1021/cm902713m · Cited by 109
Wang, Y., Xing, G., Han, Z., Shi, Y., Wong, J. I., Huang, Z. X., Ostrikov, K., & Yang, H. Y. (2014) · Nanoscale · doi:10.1039/c4nr01553c · Cited by 103
LiFeO2-Incorporated Li2MoO3 as a Cathode Additive for Lithium-Ion Battery Safety
Park, K., Im, D., Benayad, A., Dylla, A. G., Stevenson, K. J., & Goodenough, J. B. (2012) · Chemistry of Materials · doi:10.1021/cm300505y · Cited by 101
Chemical Formation of a Solid Electrolyte Interface on the Carbon Electrode of a Li‐Ion Cell
Scott, M. G., Whitehead, A., & Owen, J. R. (1998) · Journal of The Electrochemical Society · doi:10.1149/1.1838511 · Cited by 100
Li2NiO2 as a Novel Cathode Additive for Overdischarge Protection of Li-Ion Batteries
Lee, H., Chang, S.-K., Goh, E., et al. (2007) · Chemistry of Materials · doi:10.1021/cm702290p · Cited by 95
Gabrielli, G., Marinaro, M., Mancini, M., Axmann, P., & Wohlfahrt‐Mehrens, M. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.03.051 · Cited by 95
Jeżowski, P., Fic, K., Crosnier, O., Brousse, T., & Béguin, F. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta03810g · Cited by 89
Toward pre-lithiatied high areal capacity silicon anodes for Lithium-ion batteries
Marinaro, M., Weinberger, M., & Wohlfahrt‐Mehrens, M. (2016) · Electrochimica Acta · doi:10.1016/j.electacta.2016.03.139 · Cited by 88
Kasnatscheew, J., Streipert, B., Röser, S., Wagner, R., Laskovic, I., & Winter, M. (2017) · Physical Chemistry, Chemical Physics - PCCP · doi:10.1039/c7cp03072j · Cited by 88
Self-citationElectrochemical behavior of a lithium-pre-doped carbon-coated silicon monoxide anode cell
Seong, I. W., Kim, K. T., & Yoon, W. Y. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.11.029 · Cited by 86
Krause, A., Dörfler, S., Piwko, M., Wisser, F. M., Jaumann, T., Ahrens, E., Giebeler, L., Althues, H., Schädlich, S., Grothe, J., et al. (2016) · Scientific Reports · doi:10.1038/srep27982 · Cited by 85
Li‐Metal‐Free Prelithiation of Si‐Based Negative Electrodes for Full Li‐Ion Batteries
Zhou, H., Wang, X., & Chen, D. (2015) · ChemSusChem · doi:10.1002/cssc.201500287 · Cited by 83
Kasnatscheew, J., Evertz, M., Streipert, B., Wagner, R., Nowak, S., Cekić-Lasković, I., & Winter, M. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.05.092 · Cited by 76
Self-citationFriesen, A., Hildebrand, S., Horsthemke, F., Börner, M., Schmuch, R., Niehoff, P., Schappacher, F. M., & Winter, M. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.07.062 · Cited by 76
Self-citationElectromechanical Probing of Li/Li2CO3Core/Shell Particles in a TEM
Xiang, B., Wang, L., Liu, G., & Minor, A. M. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.018303jes · Cited by 74
A lithium ion cell containing a non-lithiated cathode
Jarvis, C., Lain, M. J., Gao, Y., & Yakovleva, M. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.03.023 · Cited by 70
Brutti, S., Gentili, V., Reale, P., Carbone, L., & Panero, S. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.08.022 · Cited by 68
Cao, W., Luo, J. F., Yan, J., Chen, X. J., Brandt, W., Warfield, M., Lewis, D., Yturriaga, S., Moye, D. G., & Zheng, J. P. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.0351702jes · Cited by 68
Cheah, Y. L., Aravindan, V., & Srinivasan, M. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am400666n · Cited by 67
Kumagai, S., Ishikawa, T., & Sawa, N. (2015) · Journal of Energy Storage · doi:10.1016/j.est.2015.05.005 · Cited by 64
Eliminating pre-lithiation step for making high energy density hybrid Li-ion capacitor
Zhang, S.-B. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.01.061 · Cited by 64
Cheah, Y. L., Aravindan, V., & Srinivasan, M. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.015308jes · Cited by 60
Moorhead‐Rosenberg, Z., Allcorn, E., & Manthiram, A. (2014) · Chemistry of Materials · doi:10.1021/cm5024426 · Cited by 58
Qi, X., Blizanac, B. B., Pasquier, A. D., Lal, A., Niehoff, P., Placke, T., Oljaca, M., Li, J., & Winter, M. (2014) · Journal of The Electrochemical Society · doi:10.1149/2.0401503jes · Cited by 57
Self-citationHierarchical columnar silicon anode structures for high energy density lithium sulfur batteries
Piwko, M., Kuntze, T. H., Winkler, S., Straach, S., Härtel, P., Althues, H., & Kaskel, S. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.03.080 · Cited by 52
Aravindan, V., Nagasubramanian, A., Shubha, N., Jayaraman, S., & Srinivasan, M. (2016) · Electrochimica Acta · doi:10.1016/j.electacta.2016.08.078 · Cited by 46
Kleiner, K., & Ehrenberg, H. (2017) · Topics in Current Chemistry · doi:10.1007/s41061-017-0139-2 · Cited by 41
Qin, L., Zhai, D., Lv, W. Z., Yang, W., Huang, J., Yao, S., Cui, J., Chong, W. G., Huang, J.-Q., Kang, F., et al. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.08.029 · Cited by 41
Zhou, D., Liu, M., Yun, Q., Wang, X., He, Y., Li, B., Yang, Q., Cai, Q., & Kang, F. (2016) · Small · doi:10.1002/smll.201602015 · Cited by 40
Constructing High Energy and Power Densities Li-Ion Capacitors Using Li Thin Film for Pre-Lithiation
Yan, J., Cao, W., & Zheng, J. P. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.1701709jes · Cited by 39
Multiscale analysis of prelithiated silicon nanowire for Li-ion battery
Chang, S., Moon, J., Cho, K., & Cho, M. (2014) · Computational Materials Science · doi:10.1016/j.commatsci.2014.11.001 · Cited by 35
Zhang, S. S. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta03923a · Cited by 32
Enabling electrolyte compositions for columnar silicon anodes in high energy secondary batteries
Piwko, M., Thieme, S., Weller, C., Althues, H., & Kaskel, S. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.07.046 · Cited by 27
Cited by
Fundamentals, status and promise of sodium-based batteries
Usiskin, R., Lu, Y., Popovic, J., Law, M., Balaya, P., Hu, Y.-S., & Maier, J. (2021) · Nature Reviews Materials · doi:10.1038/s41578-021-00324-w · Cited by 1,370
Research Development on K-Ion Batteries
Hosaka, T., Kubota, K., Hameed, A. S., & Komaba, S. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00463 · Cited by 1,346
Asenbauer, J., Eisenmann, T., Kuenzel, M., Kazzazi, A., Chen, Z., & Bresser, D. (2020) · Sustainable Energy & Fuels · doi:10.1039/d0se00175a · Cited by 1,295
Lithium-ion batteries – Current state of the art and anticipated developments
Armand, M., Axmann, P., Bresser, D., Copley, M., Edström, K., Ekberg, C., Guyomard, D., Lestriez, B., Novák, P., Petranikova, M., et al. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.228708 · Cited by 888
Perspective on Performance, Cost, and Technical Challenges for Practical Dual-Ion Batteries
Placke, T., Heckmann, A., Schmuch, R., Meister, P., Beltrop, K., & Winter, M. (2018) · Joule · doi:10.1016/j.joule.2018.09.003 · Cited by 428
Self-citation
Metadata
- Authors
- Holtstiege, F., Bärmann, P., Nölle, R., Winter, M., & Placke, T.
- Venue
- Batteries
- Publisher
- MDPI AG
- Published
- 2018-01-23
- Volume
- 4
- Issue
- 1
- Pages
- 4
- ISSN
- 2313-0105 (ISSN-L)
- OpenAlex
- W2787436741
- Cited by
- 357
- References
- 113
- FWCI
- 15.34
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.