The DOI matches its Crossref record; 99 of the 101 references it cites were found in a registry or an index; 74 of the 216 sources its claims cite were checked for support.
Recent Advances in Metal-Oxide-Based Photoresists for EUV Lithography
Open accessAbstract
Extreme ultraviolet lithography (EUVL) is a leading technology in semiconductor manufacturing, enabling the creation of high-resolution patterns essential for advanced microelectronics. This review highlights recent progress in inorganic metal-oxide-based photoresists, with a focus on their applications in EUVL. The unique properties of zinc-based, tin-oxygen, and IVB group inorganic photoresists are examined, showcasing their enhanced chemical reactivity and precise patterning capabilities. Key advancements include the development of zinc oxide and tin oxide nanoparticles, which demonstrate significant improvements in photon absorption and solubility under extreme ultraviolet exposure. Additionally, the review delves into the photochemical reactions of tin-oxygen clusters and the influence of various ligands on film density and cross-linking. The findings suggest that these inorganic photoresists not only improve photolithographic performance but also hold potential for broader applications, such as pyroelectric infrared sensors and 3D printing. Future research directions are outlined, including the optimization of process parameters, the exploration of new ligand and metal combinations, and the evaluation of the environmental benefits of inorganic photoresists over traditional organic ones. These advancements are poised to further enhance the resolution and patterning capabilities required for next-generation semiconductor devices.
Overview
CoChat Summary
TL;DR
This review summarizes recent progress in inorganic metal-oxide-based photoresists for extreme ultraviolet lithography (EUVL), focusing on zinc-based, tin–oxygen, and IVB group materials. It reports improved EUV absorption, patterning performance, and broader application potential, while outlining future research directions.
Key findings
- Metal-oxide resists absorb EUV more efficiently than organic polymers: tin–oxide photoresists showed absorption coefficients 2 to 3 times greater than polymer-based resists, and hafnium-based material (HfM) had an absorption coefficient of about 9.0 µm−1 versus 4.8 µm−1 for a standard organic CAR.
- Zn(MA)(TFA) photoresist formed dense line/space patterns with half-pitches from 22 to 50 nm at a low exposure dose of around 20 mJ/cm2, with aspect ratios of 1:3 for 50, 30, and 22 nm HPs and about 1:2 for 40 nm HP; most HP values met the industry requirement of LWR less than 20% of CD.
- TinOH tin–oxygen photoresist exhibited dual-tone behavior: low electron-beam doses (e.g., 50 µC/cm2) gave positive-tone patterns, while higher doses (e.g., 400 and 1000 µC/cm2) gave negative-tone patterns; under EUV, low dose (e.g., 3.6 mJ/cm2) produced positive tone and higher dose (e.g., 53.5 mJ/cm2) produced negative tone.
- IVB group HfO2 and ZrO2 nanoparticle photoresists showed etch resistance surpassing polymer resists by up to 25 times, enabled processing of films <40 nm, and achieved resolution limits below 20 nm; ZrMAA films were patterned in negative tone with a record-low EUV dose of 4.2 mJ/cm².
Methods
- Design: narrative review of recent advances in inorganic metal-oxide-based photoresists for EUVL, covering zinc-based, tin–oxygen, and IVB group materials.
- Data/sample: published literature and cited experimental studies, including studies on zinc oxo clusters, tin oxo cages, HfO2/ZrO2 nanoparticles, and industry examples; no primary experiments were conducted by the review authors.
- Main analysis: thematic synthesis of photoresist chemistry, synthesis techniques (e.g., ALD, ASD, VPI, MALD, non-aqueous sol–gel), characterization methods (e.g., XPS, XAS, nano-IR, SEM, CD-SEM, TEM, AFM), performance evaluation, applications, and market prospects.
Limitations
- The paper does not state explicit limitations.
- As a review, it reports performance numbers from cited studies rather than generating or independently validating new experimental data.
- The scope is limited to zinc-based, tin–oxygen, and IVB group inorganic photoresists, so findings may not generalize to all metal-oxide or EUV photoresist systems.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Figures
![Figure 2 (a) Hydrolysis–dehydration chemical reaction for Zn oxo cluster formation (reprinted with permission from ref. [23], 2012, Royal Society of Chemistry). (b) Structure of tin oxo clusters (reprinted with permission from ref. [21], 2014, Elsevier). (c) Photochemical reactions for TinOH subjected to UV in air and N2 [22].](https://figures.cochat.ai/paper-figures/0ecb04ca66c34b7aaa40ca89b9e9237b/recent-advances-in-metal-oxide-based-photoresists-for-euv-lithography-figure-2.jpg)
![Figure 5 (a) Diagram showing the area-specific ALD process. (b) The EUV patterning process flow in combination with the area-selective deposition method: (1) EUV resist spin-coating on substrate, (2) exposure of the pattern via EUV lithography, (3) development and materials applied to (4) patterned EUV resist or (5) substrate on a selective basis [30].](https://figures.cochat.ai/paper-figures/61a65dfd12704a04b2eda5126348348b/recent-advances-in-metal-oxide-based-photoresists-for-euv-lithography-figure-5.jpg)
![Figure 6 (a) Workflow for patterning integrated with VPI: (1) applying resist onto a Si substrate using spin-coating, (2) exposing the pattern using e-beam or EUV lithography, (3) development step, and (4) SIS AlOx infiltration. (b) Workflow for VPI before lithography: (1) applying resist onto the substrate using spin-coating, (2) infiltrating with AlOx, and (3) pattern exposure using e-beam or EUV lithography [30].](https://figures.cochat.ai/paper-figures/a681d6e0c0a844ffb039af08d0c58656/recent-advances-in-metal-oxide-based-photoresists-for-euv-lithography-figure-6.jpg)
![Figure 10 (a) Diagram illustrating a hybrid inorganic/organic nanoparticle featuring a HfO2 core surrounded by an organic ligand shell (reprinted with permission from ref. [68], 1972, Royal Society of Chemistry). (b) Structural representation of ZrMc metal oxo clusters used as photoresists, showing the coordination geometry with polygons, oxygen atoms as red spheres, and C-C bonds as gray bars. (Reprinted with permission from ref. [8], 2002, SPIE).](https://figures.cochat.ai/paper-figures/19101be375f743d4972193cb5f5c9b1a/recent-advances-in-metal-oxide-based-photoresists-for-euv-lithography-figure-10.jpg)
![Figure 11 Architecture of HFO2 and ZrO2 nanoparticle-based photoresists (reprinted with permission from ref. [69], 2014, SPIE).](https://figures.cochat.ai/paper-figures/cf82c97cdef240518e0dde576927cdb8/recent-advances-in-metal-oxide-based-photoresists-for-euv-lithography-figure-11.jpg)
![Figure 1 (a) Lithography technology advancement from 1970 to 2020. (b) DUV and EUV lithography comparison [6]. (c) Photochemical reactions of EUV photoresist (reprinted with permission from ref. [5], 2023, Elsevier). (d) Definitions of line edge roughness and line width roughness (reprinted with permission from ref. [7], 2016, Elsevier). (e) Absorption coefficient of different metal oxide photoresists at EUV as compared to traditional CAR (reprinted with permission from ref. [8], 2002, SPIE).](https://figures.cochat.ai/paper-figures/67260658f6e4494c828910e2d87c1824/recent-advances-in-metal-oxide-based-photoresists-for-euv-lithography-figure-1.jpg)
![Figure 3 Increase in size of HfO2 particle mechanism after UV treatment [27].](https://figures.cochat.ai/paper-figures/aa6704dbef8a410abba7528f72c02216/recent-advances-in-metal-oxide-based-photoresists-for-euv-lithography-figure-3.jpg)
![Figure 4 (a) Atomic absorption of different elements at EUV; (b) Experimental setup for absorption measurement (reprinted with permission from ref. [8], 2002, SPIE).](https://figures.cochat.ai/paper-figures/ce04d5021b9046e9a916604665f163c5/recent-advances-in-metal-oxide-based-photoresists-for-euv-lithography-figure-4.jpg)
![Figure 7 (a) The procedure of the MALD method, which involves the growth of hybrid thin films by sequentially exposing inorganic and organic precursors. (b) The surface reactions in the MALD formation of poly(aluminum ethylene glycol) alucone, utilizing TMA (A) and EG (B) as the inorganic and organic precursors, respectively [30].](https://figures.cochat.ai/paper-figures/e4408453dc314dc3a9d422745288dfdd/recent-advances-in-metal-oxide-based-photoresists-for-euv-lithography-figure-7.jpg)
![Scheme 1 Condensation reactions forming metal–oxygen–metal bonds in non-aqueous sol–gel processes include: alkyl halide elimination (Equation (1)), ether elimination (Equation (2)), ester elimination (Equation (3)), and aldol-like condensation (Equation (4)) [42].](https://figures.cochat.ai/paper-figures/277ff7a4713f488499e91886cd2390f3/recent-advances-in-metal-oxide-based-photoresists-for-euv-lithography-figure-10.jpg)
![Scheme 2 Suggested reaction pathway for creating a C–C bond, resulting in the concurrent production of BaTiO3 nanoparticles and 4-phenyl-2-butanol [42].](https://figures.cochat.ai/paper-figures/55f2b52eca4c40ef91c30af941b4f0c1/recent-advances-in-metal-oxide-based-photoresists-for-euv-lithography-figure-11.jpg)
![Figure 8 Various cluster structures synthesized using Zn2(CO2)4 as the metal unit combined with different organic ligands. (a) The crystal structure of MOF-2, (b) the structure of Zn-BA, (c) the structure of Zn-mTA, (d) 15 nm high-precision line-space (HP LS) structure can be fabricated through photoetching technology by employing Zn-mTA as a photoresist. The atomic color coding in the structures is as follows: carbon is represented in gray, oxygen in red, nitrogen in purple, hydrogen in white, and zinc in blue [60]. (e) The diagram of a ligand exchange reaction resulting in Zn(MA)(TFA) synthesis [61].](https://figures.cochat.ai/paper-figures/47712c0d628244f285a422e2041c8d54/recent-advances-in-metal-oxide-based-photoresists-for-euv-lithography-figure-8.jpg)
![Figure 9 (a) Bond dissociation energies and photolithography results for three organic groups. (b) Correlation between the radical stability of organic groups and the sensitivity of clusters. (c) Phenyltin trichloride is converted into phenylstannic acid, and then dehydrated to synthesize tin clusters. (d) Phenyltin trichloride is hydrolyzed with ammonium hydroxide to form a soluble polymer material (reprinted with permission from ref. [21], 2014, Elsevier).](https://figures.cochat.ai/paper-figures/c86abc533cc54210a75e6f7725c23d03/recent-advances-in-metal-oxide-based-photoresists-for-euv-lithography-figure-9.jpg)
![Figure 12 (a) LWR results were determined using power spectral density (PSD) analysis of SEM images (taken at 2 kV) of the line and space features. (b) The experimental data were fitted to F 1s high-resolution spectra for both unexposed and EUV-exposed Zn(MA)(TFA) resists, revealing variations in elemental ratios of specific components relative to Zn based on EUV dose. (c) FTIR spectra of Zn(MA)(TFA) resist films were analyzed before and after EUV exposure, including a schematic of the exposed sample showing regions subjected to different EUV doses and the changes in peak areas related to MA and TFA ligands as a function of dose compared to the unexposed region [59].](https://figures.cochat.ai/paper-figures/e072d13a32434b5bae4ee5af04d8efd8/recent-advances-in-metal-oxide-based-photoresists-for-euv-lithography-figure-12.jpg)
![Figure 13 (a) SEM and AFM images of tin oxo cage thin films patterned with 3.6 mJ/cm2 and 53.5 mJ/cm2 EUV doses, along with their corresponding cross-sectional profiles. (b) The spectra of TinOH thin layers with various EUV exposures and post-exposure baking, TGA of TinOH powder, highlighting weight changes and the loss of water, butene, and butane with temperature [89].](https://figures.cochat.ai/paper-figures/b27ab46800f14b84876c611da73b1f23/recent-advances-in-metal-oxide-based-photoresists-for-euv-lithography-figure-13.jpg)
![Figure 14 SEM images showing patterns of Zr clusters with varying line spacings (1:5 ratio): (a) Lines composed of Zr oxo clusters with a 15 nm pattern width; (b) Lines of Zr oxo clusters with a 16 nm pattern width; (c) Lines formed from Zr6O4 clusters, each 15 nm wide; (d) Zr6O4 cluster lines, each 16 nm in width (reprinted with permission from ref. [76], 2022, John Wiley and Sons).](https://figures.cochat.ai/paper-figures/beeb72fee3244fa4a75df3aec4fe96a5/recent-advances-in-metal-oxide-based-photoresists-for-euv-lithography-figure-14.jpg)
![Figure 15 SEM images of Zn-mTA cluster line and space dense patterns fabricated via EUV exposure: (a) 16 nm at a dose of 45 mJ/cm2, (b) 15 nm at a dose of 47 mJ/cm2, (c) 14 nm at a dose of 36 mJ/cm2, and (d) 13 nm at a dose of 35 mJ/cm2 [60].](https://figures.cochat.ai/paper-figures/f6d09c8af1c74a478ba4599870a2ed12/recent-advances-in-metal-oxide-based-photoresists-for-euv-lithography-figure-15.jpg)
![Figure 16 (a) Optical density (EUV) mentioned in periodic table. (b) Tin clusters were examined using lithographic techniques to determine their relative sensitivity (reprinted with permission from ref. [92], 2014, SPIE).](https://figures.cochat.ai/paper-figures/57449492fc024c3a9d713116b5c43e82/recent-advances-in-metal-oxide-based-photoresists-for-euv-lithography-figure-16.jpg)
![Figure 17 Hysteresis curve comparison of Si-doped and Hf-Zr-based sensors with better area increase on the substrate [94].](https://figures.cochat.ai/paper-figures/f2577dff3d624cbfa0ef2f79deb3e998/recent-advances-in-metal-oxide-based-photoresists-for-euv-lithography-figure-17.jpg)
Verification
Claims the paper makes
62 Valid · 10 Not valid · 121 Not checked · 52 Own results and interpretations
At least one cited source doesn’t support this claim or points to a different paper, and none confirmed it — see the verdicts below.
In the paper
“The patterns exhibited low LER, with roughness values below 3 nm, critical for ensuring the accuracy and reliability of semiconductor components.”
§ Recent Advances in Metal-Oxide-Based Photoresists for EUV Lithography > 5. Performance Evaluation of Metal-Oxide-Based Photoresists > 5.3. Analysis of IV B Group Inorganic-Based Photoresists
What the sources say
- Disputedcites [24] Trikeriotis, 2012, Nanoparticle Photoresists from HfO2 and ZrO2 for EUV Patterning, J. Photopolym. Sci. Technol. sourceExperimental — accuracy not yet measured
The paper describes the patterns as having low LER (p. 1), but its measured values contradict the claimed threshold. The preparation section (p. 3) reports LER values of 5.9 nm and 3.8 nm for the two patterns shown, both above 3 nm. (LLM, conf=0.90)
Checked by a reasoning model — may be wrong.
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Disputed
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“Research by Fallica et al. [8] confirmed that metal oxides absorb EUV light more efficiently than organic polymers.”
§ Recent Advances in Metal-Oxide-Based Photoresists for EUV Lithography > 1. Introduction
What the sources say
- Partly supportedcites [8] Fallica, 2018, Absorption coefficient of metal-containing photoresists in the extreme ultraviolet, J. Micro/Nanolithogr. MEMS MOEMS sourceExperimental — accuracy not yet measured
The Abstract reports that tin-containing and hafnium-containing resists absorbed more EUV light than conventional organic photoresists. But it also reports that zirconium oxoclusters had comparable absorptivity, so the paper does not confirm the claim for metal oxides generally. (LLM, conf=0.90)
boostedstates an association- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“IVB group metal oxides, including hafnium and zirconium, enhance etch resistance and resolution through reduced organic content and careful ligand selection.”
§ Recent Advances in Metal-Oxide-Based Photoresists for EUV Lithography > 2. Metal-Oxide-Based Photoresist Chemistry
What the sources say
- Partly supportedcites [18] Luo, 2020, Review of recent advances in inorganic photoresists, RSC Adv. sourceExperimental — accuracy not yet measured
The IVB-group photoresists section says hafnium oxide improves etch resistance and that reducing organic content can improve it further. It links small, uniformly sized oxide particles to better resolution. The Conclusions and outlook section proposes ligand design as a way to optimize performance, including resolution, but does not establish that careful ligand selection has already enhanced resolution. (LLM, conf=0.82)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“Zinc-based inorganic photoresists, incorporating zinc oxide as the photoactive component, offer enhanced chemical reactivity upon light exposure, crucial for high-resolution patterning.”
§ Recent Advances in Metal-Oxide-Based Photoresists for EUV Lithography > 2. Metal-Oxide-Based Photoresist Chemistry
What the sources say
- Partly supportedcites [18] Luo, 2020, Review of recent advances in inorganic photoresists, RSC Adv. sourceExperimental — accuracy not yet measured
The Zinc-based inorganic photoresist section says ZnO can be used as a photoresist and describes light-induced ligand detachment and aggregation in zinc oxo clusters. It also reports high-resolution patterning with a zinc-cluster resist, but does not establish that ZnO provides enhanced photochemical reactivity or that such enhancement is crucial to the resolution achieved. Page numbers were not supplied for these passages. (LLM, conf=0.82)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“Nevertheless, when ZrO2 is coordinated with organic ligands, its EUV absorptivity approximates that of organic photoresists [18].”
§ Recent Advances in Metal-Oxide-Based Photoresists for EUV Lithography > 3. Metal-Oxide-Based Photoresist Synthesis Techniques > 3.2. Novel Inorganic Metal-Oxide-Based Photoresists and Synthesis Processes
What the sources say
- Partly supportedcites [18] Luo, 2020, Review of recent advances in inorganic photoresists, RSC Adv. sourceExperimental — accuracy not yet measured
The Inorganic photoresists section (page unavailable) says ZrOx has approximately the same EUV absorptivity as organic photoresist. The IVB group section describes zirconium oxide photoresists with organic ligands, but does not establish that the absorptivity comparison applies specifically to ligand-coordinated ZrO2. (LLM, conf=0.84)
plainstates an association- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
96 more claims · 29 with their cited sources checked
Create a free account to see all 245 claims and to verify the 11 references still open.
- It may state two separate claims as one. 116
- Probably not a substantial claim. 43
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Recent Advances in Metal-Oxide-Based Photoresists for EUV Lithography > 3. Metal-Oxide-Based Photoresist Synthesis Techniques > 3.2. Novel Inorganic Metal-Oxide-Based Photoresists and Synthesis Processes
“(Reprinted with permission from ref. [8], 2002, SPIE).”
§ Recent Advances in Metal-Oxide-Based Photoresists for EUV Lithography > References
“8. Fallica R. Haitjema J. Wu L. Castellanos S. Brouwer A.M. Ekinci Y. Absorption coefficient of metal-containing photoresists in the extreme ultraviolet J. Micro/Nanolithogr. MEMS MOEMS 2018 17 23505”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Recent Advances in Metal-Oxide-Based Photoresists for EUV Lithography > 2. Metal-Oxide-Based Photoresist Chemistry > 2.2. Tin–Oxygen Inorganic Photoresist Mechanism
“The group of Zhang et al. [22] have also studied the photochemical reactions occurring in tin oxo cage clusters.”
§ Recent Advances in Metal-Oxide-Based Photoresists for EUV Lithography > References
“22. Yu Z. Jarich H. Xiaomeng L. Fredrik J. Andreas L. Sonia C. Niklas O. Albert M.B. Photochemical conversion of tin-oxo cage compounds studied using hard x-ray photoelectron spectroscopy”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Recent Advances in Metal-Oxide-Based Photoresists for EUV Lithography > 3. Metal-Oxide-Based Photoresist Synthesis Techniques > 3.2. Novel Inorganic Metal-Oxide-Based Photoresists and Synthesis Processes
“Figure 10 (a) Diagram illustrating a hybrid inorganic/organic nanoparticle featuring a HfO2 core surrounded by an organic ligand shell (reprinted with permission from ref. [68], 1972, Royal Society of Chemistry).”
§ Recent Advances in Metal-Oxide-Based Photoresists for EUV Lithography > References
“68. Li L. Liu X. Pal S. Wang S. Ober C.K. Giannelis E.P. Extreme ultraviolet resist materials for sub-7 nm patterning Chem. Soc. Rev. 2017 46 4855 4866”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Recent Advances in Metal-Oxide-Based Photoresists for EUV Lithography > 2. Metal-Oxide-Based Photoresist Chemistry > 2.2. Tin–Oxygen Inorganic Photoresist Mechanism
“(a) Hydrolysis–dehydration chemical reaction for Zn oxo cluster formation (reprinted with permission from ref. [23], 2012, Royal Society of Chemistry).”
§ Recent Advances in Metal-Oxide-Based Photoresists for EUV Lithography > References
“23. Yeh C.-C. Liu H.-C. Heni W. Berling D. Zan H.-W. Soppera O. Chemical and structural investigation of zinc-oxo cluster photoresists for DUV lithography J. Mater. Chem. C 2017 5 2611 2619”
Citations
Cites
Nonaqueous sol–gel routes to metal oxide nanoparticles
Niederberger, M. (2007) · Accounts of Chemical Research · doi:10.1021/ar600035e · Cited by 761 · cited 6×
“Given these features, the main advantages of solvent-controlled approaches include [42]: Improved Product Purity: The absence of surfactants eliminates issues related to nanoparticle surface accessibility, crucial for applications in catalysis and sensing, as well as reduces potential toxicity…”
BackgroundMethodInfluentialOne‐Nanometer‐Scale Size‐Controlled Synthesis of Monodisperse Magnetic Iron Oxide Nanoparticles
Park, J., Lee, E., Hwang, N., Kang, M., Kim, S. C., Hwang, Y., Park, J., Noh, H., Kim, J., Park, J., et al. (2005) · Angewandte Chemie International Edition · doi:10.1002/anie.200461665 · Cited by 652 · cited 2×
“…Iron Oxide Nanoparticles: Achieving sizes from 6–13 nm in precise one-nanometer steps by manipulating surfactant concentrations and reaction conditions [51]. o Ferrite Nanoparticles (MFe 2 O 4 ): Shape control (cube-like and polyhedron-shaped) was achieved through non-hydrolytic…”
BackgroundMethodde Mello Donegá, C., Liljeroth, P., & Vanmaekelbergh, D. (2005) · Small · doi:10.1002/smll.200500239 · Cited by 511 · cited 1×
“This approach utilizes the hot-injection method where a precursor solution is injected into a hot solvent containing surfactants [50].”
MethodChemCalc: A building block for tomorrow’s chemical infrastructure
Patiny, L., & Borel, A. (2013) · Journal of Chemical Information and Modeling · doi:10.1021/ci300563h · Cited by 425 · cited 2×
“These ligands enhance solubility and contribute to increased EUV photon absorption due to the presence of fluorine [20].”
BackgroundMultigram Scale Synthesis and Characterization of Monodisperse Tetragonal Zirconia Nanocrystals
Joo, J., Yu, T., Kim, Y. W., Park, H. M., Wu, F., Zhang, J. Z., & Hyeon, T. (2003) · Journal of the American Chemical Society · doi:10.1021/ja034258b · Cited by 412 · cited 1×
“TiO 2 , ZrO 2 , and HfO 2 exhibits the ability to create diverse nanostructures with controlled dimensions and distinctive morphologies using surfactant-mediated synthesis [46,54,55].”
BackgroundSynthesis of TiO2 Nanocrystals by Nonhydrolytic Solution-Based Reactions
Trentler, T. J., Denler, T. E., Bertone, J. F., Agrawal, A., & Colvin, V. L. (1999) · Journal of the American Chemical Society · doi:10.1021/ja983361b · Cited by 382 · cited 1×
“This process is exemplified in the synthesis of anatase nanocrystals from titanium isopropoxide and titanium chloride [43] ((1) in Scheme 1).”
Shape-Controlled Synthesis and Shape-Induced Texture of MnFe 2 O 4 Nanoparticles
Zeng, H., Rice, P. M., Wang, S. X., & Sun, S. (2004) · Journal of the American Chemical Society · doi:10.1021/ja045911d · Cited by 369
Extreme ultraviolet resist materials for sub-7 nm patterning
Li, L., Liu, X., Pal, S., Wang, S., Ober, C. K., & Giannelis, E. P. (2017) · Chemical Society Reviews · doi:10.1039/c7cs00080d · Cited by 345
Narayanaswamy, A., Xu, H., Pradhan, N., Kim, M., & Peng, X. (2006) · Journal of the American Chemical Society · doi:10.1021/ja0627601 · Cited by 307 · cited 1×
“Ester elimination takes place between metal alkoxides and carboxylates, a method applied in the synthesis of zinc oxide [45], titania [46], and indium oxide [47] ((3) in Scheme 1).”
MethodNiederberger, M., Garnweitner, G., Pinna, N., & Antonietti, M. (2004) · Journal of the American Chemical Society · doi:10.1021/ja0494959 · Cited by 284 · cited 1×
“Subsequently, there is a transfer of hydroxyl groups and condensation leading to the formation of metal oxide [49] (Scheme 2). metal oxide [49] (Scheme 2) Scheme 2.”
BackgroundJoo, J., Kwon, S. G., Yu, J. H., & Hyeon, T. (2005) · Advanced Materials · doi:10.1002/adma.200402109 · Cited by 277 · cited 2×
“Ester elimination takes place between metal alkoxides and carboxylates, a method applied in the synthesis of zinc oxide [45], titania [46], and indium oxide [47] ((3) in Scheme 1).”
BackgroundMethodBa, J., Polleux, J., Antonietti, M., & Niederberger, M. (2005) · Advanced Materials · doi:10.1002/adma.200501018 · Cited by 271 · cited 1×
“Examples of successful solvent-controlled syntheses include SnO 2 nanoparticles, which are dispersible in tetrahydrofuran and demonstrate the method’s efficiency in producing particles suitable for high-tech applications [56].”
Evolution in Lithography Techniques: Microlithography to Nanolithography
Sharma, E., Rathi, R., Misharwal, J., Sinhmar, B., Kumari, S., Dalal, J., & Kumar, A. (2022) · Nanomaterials · doi:10.3390/nano12162754 · Cited by 257 · cited 1×
“High EUV doses pose significant issues for traditional chemically amplified photoresists (CARs), slowing manufacturing through-put [13].”
BackgroundAminolysis Route to Monodisperse Titania Nanorods with Tunable Aspect Ratio
Zhang, Z., Zhong, X., Liu, S., Li, D., & Han, M. (2005) · Angewandte Chemie International Edition · doi:10.1002/anie.200500410 · Cited by 236 · cited 1×
“• Amide elimination facilitates the controlled growth of nanostructures like titania nanorods through the reaction of metal oleates with amines [48] ((4) in Scheme 1).”
BackgroundSingle Crystal Manganese Oxide Multipods by Oriented Attachment
Zitoun, D., Pinna, N., Frolet, N., & Belin, C. (2005) · Journal of the American Chemical Society · doi:10.1021/ja0555926 · Cited by 234 · cited 1×
“…2 O 4 ): Shape control (cube-like and polyhedron-shaped) was achieved through non-hydrolytic reactions involving metal acetylacetonates, influenced by surfactant-to-iron ratios [52]. o Complex Nanocrystal Morphologies: Examples include cone-like ZnO [45], titania nanorods, and MnO multipods [53].”
BackgroundLeng, C. Z., & Losego, M. D. (2017) · Materials Horizons · doi:10.1039/c7mh00196g · Cited by 224 · cited 2×
“…of EUV photoresists by forming inorganic–organic composites [36]. technique distinguishes itself from ALD through the infiltration of gaseous metal precursors into polymers during the exposure step, enhancing the properties of EUV photoresists by forming inorganic organic composites [36].”
BackgroundReview of recent advances in inorganic photoresists
Luo, C., Xu, C., Lv, L., Li, H., Huang, X., & Liu, W. (2020) · RSC Advances · doi:10.1039/c9ra08977b · Cited by 207 · cited 6×
“Nevertheless, when ZrO 2 is coordinated with organic ligands, its EUV absorptivity approximates that of organic photoresists [18].”
BackgroundMethodInfluentialPhotolithographic properties of tin-oxo clusters using extreme ultraviolet light (13.5nm)
Cardineau, B., Del Re, R., Marnell, M., Al-Mashat, H., Vockenhuber, M., Ekinci, Y., Sarma, C., Freedman, D. A., & Brainard, R. L. (2014) · Microelectronic Engineering · doi:10.1016/j.mee.2014.04.024 · Cited by 202 · cited 5×
“In the study of Cardineau et al. [21], all chemical reactions were performed under a nitrogen atmosphere.”
BackgroundMethodInfluentialManouras, T., & Argitis, P. (2020) · Nanomaterials · doi:10.3390/nano10081593 · Cited by 196 · cited 1×
“The resist formulation was created by dissolving the solid material in 2-butanone, filtered through a 0.2 µ m polytetrafluoroethylene polymer (PTFE) filter [65].”
MethodInfluentialNear Monodisperse TiO2 Nanoparticles and Nanorods
Li, X., Peng, Q., Yi, J., Wang, X., & Li, Y. (2006) · Chemistry – A European Journal · doi:10.1002/chem.200500893 · Cited by 175 · cited 2×
“Ester elimination takes place between metal alkoxides and carboxylates, a method applied in the synthesis of zinc oxide [45], titania [46], and indium oxide [47] ((3) in Scheme 1).”
BackgroundMethodOne‐Nanometer‐Scale Size‐Controlled Synthesis of Monodisperse Magnetic Iron Oxide Nanoparticles
Park, J., Lee, E., Hwang, N., Kang, M., Kim, S. C., Hwang, Y., Park, J., Noh, H., Kim, J., Park, J., et al. (2005) · Angewandte Chemie · doi:10.1002/ange.200461665 · Cited by 175
Ba, J., Fattakhova Rohlfing, D., Feldhoff, A., Brezesinski, T., Djerdj, I., Wark, M., & Niederberger, M. (2006) · Chemistry of Materials · doi:10.1021/cm060548q · Cited by 168 · cited 1×
“Indium tin oxide nanoparticles, known for adjustable dopant concentrations and excellent electrical conductivity without the need for additional annealing, further highlight the versatility and effectiveness of this synthesis method in creating conductive materials [58].”
MethodNon‐Aqueous Synthesis of High‐Purity Metal Oxide Nanopowders Using an Ether Elimination Process
Pinna, N., Garnweitner, G., Antonietti, M., & Niederberger, M. (2004) · Advanced Materials · doi:10.1002/adma.200400460 · Cited by 168 · cited 1×
“This reaction pathway has been utilized for synthesizing hafnium oxide nanoparticles [44] ((2) in Scheme 1).”
MethodBeyond EUV lithography: a comparative study of efficient photoresists' performance
Mojarad, N., Gobrecht, J., & Ekinci, Y. (2015) · Scientific Reports · doi:10.1038/srep09235 · Cited by 162 · cited 1×
“Tin–oxygen cage molecules can be considered as the tin equivalent of silsesquioxane compounds composed primarily of silicon [62].”
BackgroundTang, J., Fabbri, J., Robinson, R. D., Zhu, Y., Herman, I. P., Steigerwald, M. L., & Brus, L. E. (2004) · Chemistry of Materials · doi:10.1021/cm049945w · Cited by 154 · cited 1×
“TiO 2 , ZrO 2 , and HfO 2 exhibits the ability to create diverse nanostructures with controlled dimensions and distinctive morphologies using surfactant-mediated synthesis [46,54,55].”
BackgroundMetal–organic framework-inspired metal-containing clusters for high-resolution patterning
Xu, H., Sakai, K., Kasahara, K., Kosma, V., Yang, K., Herbol, H. C., Odent, J., Clancy, P., Giannelis, E. P., & Ober, C. K. (2018) · Chemistry of Materials · doi:10.1021/acs.chemmater.8b01573 · Cited by 129
Li, L., Chakrabarty, S., Spyrou, K., Ober, C. K., & Giannelis, E. P. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b01506 · Cited by 126 · cited 1×
“…study revealed that HfO 2 modified with MAA and DMA ligands was more prone to agglomeration under UV light compared to HfO 2 modified with benzoic acid (BA) ligands. the stronger interaction between BA and the metal oxide particles, resulting stable formation of metal oxide particles/ligands [27].”
BackgroundLim, G., Lee, K., Choi, S., & Yoon, H. J. (2023) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2023.215307 · Cited by 106 · cited 3×
“These processes contribute to the overall enhanced resolution of lithography and enable the fabrication of much finer features on the wafer [5].”
BackgroundMethodInfluentialAbsorption coefficient of metal-containing photoresists in the extreme ultraviolet
Fallica, R., Haitjema, J., Wu, L., Castellanos Ortega, S., Brouwer, A. M., & Ekinci, Y. (2018) · Journal of Micro/Nanopatterning Materials and Metrology · doi:10.1117/1.jmm.17.2.023505 · Cited by 105 · cited 8×
“…for high-volume manufacturing, as generating EUV light is expensive, and EUV sources, typically based on tin plasma, have A technique for evaluating thin layer photoresist absorption under EUV light from a synchrotron source in transmission mode has been developed by Fallica et al. [8].”
BackgroundMethodResultInfluentialPuff, H., & Reuter, H. (1989) · Journal of Organometallic Chemistry · doi:10.1016/0022-328x(89)85043-0 · Cited by 103 · cited 1×
“Tin–oxygen cage molecules were first proposed by Puff and Reuter in 1989 [64], and their use for EUV photoresist technology was explored by Cardineau et al. in 2014 [21].”
EUV lithography performance for manufacturing: status and outlook
Pirati, A., Peeters, R., Smith, D., Lok, S., van Noordenburg, M., van Es, R., Verhoeven, E., Meijer, H., Minnaert, A., van der Horst, J.-W., et al. (2016) · SPIE Proceedings · doi:10.1117/12.2220423 · Cited by 95 · cited 1×
“%) and limited collector However, an organic photoresist fi lm of this thickness, with a typical absorption of 4.8 μm (cid:2879)(cid:2869) , would only utilize about 15% of the incident light. lifetimes [28].”
BackgroundInfluentialIntegrated fab process for metal oxide EUV photoresist
Grenville, A., Anderson, J. T., Clark, B. L., De Schepper, P., Edson, J., Greer, M., Jiang, K., Kocsis, M., Meyers, S. T., Stowers, J. K., et al. (2015) · SPIE Proceedings · doi:10.1117/12.2086006 · Cited by 90 · cited 1×
“For instance, Inpria Corporation achieved a resolution of 8 nm half-pitch and high etch selectivity using hafnium-based photoresists, although initial issues with low EUV photosensitivity were later resolved with tin-oxide-based resists, reaching a 13 nm half-pitch [17].”
Nonaqueous Chemistry of Group 4 Oxo Clusters and Colloidal Metal Oxide Nanocrystals
Van den Eynden, D., Pokratath, R., & De Roo, J. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c01008 · Cited by 83 · cited 2×
“This approach is a successful alternative to aqueous systems in the synthesis of different metal oxide nanoparticles, including IVB group oxides [41], which are used in photoresist EUVL [18].”
BackgroundMethodDevelopment of an inorganic photoresist for DUV, EUV, and electron beam imaging
Trikeriotis, M., Bae, W. J., Schwartz, E., Krysak, M., Lafferty, N., Xie, P., Smith, B., Zimmerman, P. A., Ober, C. K., & Giannelis, E. P. (2010) · SPIE Proceedings · doi:10.1117/12.846672 · Cited by 78 · cited 5×
“To ensure clarity and purity of the solution, any particulate matter is eliminated through filtration with a 0.2-micrometer filter membrane [25,67].”
BackgroundMethodInfluentialTiwale, N., Subramanian, A., Kisslinger, K., Lu, M., Kim, J., Stein, A., & Nam, C.-Y. (2019) · Journal of Materials Chemistry C · doi:10.1039/c9tc02974e · Cited by 78 · cited 2×
“…applications such as poly methyl methacrylate (PMMA) in fi ltrated with 𝐴𝑙𝑂 (cid:3051) as a positive-tone hybrid EUV resist system, which demonstrated increased etch resistance and process stability through a higher level of cross-linking, crucial for advanced pa tt erning techniques [38].”
BackgroundLi, L., Chakrabarty, S., Jiang, J., Zhang, B., Ober, C., & Giannelis, E. P. (2016) · Nanoscale · doi:10.1039/c5nr07334k · Cited by 78
A new inorganic EUV resist with high-etch resistance
Trikeriotis, M., Krysak, M., Chung, Y. S., Ouyang, C., Cardineau, B., Brainard, R., Ober, C. K., Giannelis, E. P., & Cho, K. (2012) · SPIE Proceedings · doi:10.1117/12.916384 · Cited by 75 · cited 7×
“To ensure clarity and purity of the solution, any particulate matter is eliminated through filtration with a 0.2-micrometer filter membrane [25,67].”
BackgroundMethodInfluentialAdvanced lithography materials: From fundamentals to applications
Zhang, Y., Yu, H., Wang, L., Wu, X., He, J., Huang, W., Ouyang, C., Chen, D., & Keshta, B. E. (2024) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2024.103197 · Cited by 72 · cited 2×
“…in lithography techniques is accompanied by certain challenges. reduction in light source wavelength increases photon energy, leading to pronounced photoresist degradation and stochastic e ff ects, which can increase line edge roughness (LER) and line width roughness (LWR) of the features [9].”
BackgroundNanoparticle Photoresists from HfO2 and ZrO2 for EUV Patterning
Trikeriotis, M., Krysaki, M., Chung, Y. S., Ouyang, C., Cardineau, B., Brainard, R., Ober, C. K., Giannelis, E. P., & Cho, K. (2012) · Journal of Photopolymer Science and Technology · doi:10.2494/photopolymer.25.583 · Cited by 70
Improvements in resist performance towards EUV HVM
Yildirim, O., Buitrago, E., Hoefnagels, R., Meeuwissen, M., Wuister, S., Rispens, G., van Oosten, A., Derks, P., Finders, J., Vockenhuber, M., et al. (2017) · SPIE Proceedings · doi:10.1117/12.2257415 · Cited by 69 · cited 2×
“Most HP values met the industry requirement of LWR being less than 20% of the CD [87].”
BackgroundEUV resists based on tin-oxo clusters
Cardineau, B., Del Re, R., Al-Mashat, H., Marnell, M., Vockenhuber, M., Ekinci, Y., Sarma, C., Neisser, M., Freedman, D. A., & Brainard, R. L. (2014) · SPIE Proceedings · doi:10.1117/12.2046536 · Cited by 67
Zhang, Y., Haitjema, J., Liu, X., Johansson, F., Lindblad, A., Castellanos, S., Ottosson, N., & Brouwer, A. M. (2017) · Journal of Micro/Nanopatterning Materials and Metrology · doi:10.1117/1.jmm.16.2.023510 · Cited by 67 · cited 2×
“The group of Zhang et al. [22] have also studied the photochemical reactions occurring in tin oxo cage clusters.”
Metal Oxide Nanoparticle Photoresists for EUV Patterning
Jiang, J., Chakrabarty, S., Yu, M., & Ober, C. K. (2014) · Journal of Photopolymer Science and Technology · doi:10.2494/photopolymer.27.663 · Cited by 66 · cited 1×
“Photoresists based on zirconium and hafnium oxo (Zr oxo and Hf oxo) have also shown impressive EUV patterning capabilities and demonstrated ability to perform well at extremely fast photo speeds, which makes them well-suited for advanced manufacturing processes [16].”
BackgroundMattson, E. C., Cabrera, Y., Rupich, S. M., Wang, Y., Oyekan, K. A., Mustard, T. J., Halls, M. D., Bechtel, H. A., Martin, M. C., & Chabal, Y. J. (2018) · Chemistry of Materials · doi:10.1021/acs.chemmater.8b03149 · Cited by 66
Ultrahigh-printing-speed photoresists for additive manufacturing
Liu, T., Tao, P., Wang, X., Wang, H., He, M., Wang, Q., Cui, H., Wang, J., Tang, Y., Tang, J., et al. (2024) · Nature Nanotechnology · doi:10.1038/s41565-023-01517-w · Cited by 63 · cited 1×
“This breakthrough suggests that the exceptional sensitivity of this organic–inorganic hybrid photoresist could enable the development of viable large-scale nanofabrication technology for additive manufacturing [95].”
BackgroundSharps, M. C., Frederick, R. T., Javitz, M. L., Herman, G. S., Johnson, D. W., & Hutchison, J. E. (2019) · Chemistry of Materials · doi:10.1021/acs.chemmater.9b01440 · Cited by 60
Stability studies on a sensitive EUV photoresist based on zinc metal oxoclusters
Thakur, N., Tseng, L., Vockenhuber, M., Ekinci, Y., & Castellanos, S. (2019) · Journal of Micro/Nanopatterning Materials and Metrology · doi:10.1117/1.jmm.18.4.043504 · Cited by 57
Dual-tone Application of a Tin-Oxo Cage Photoresist Under E-beam and EUV Exposure
Zhang, Y., Haitjema, J., Baljozović, M., Vockenhuber, M., Kazazis, D., Jung, T. A., Ekinci, Y., & Brouwer, A. M. (2018) · Journal of Photopolymer Science and Technology · doi:10.2494/photopolymer.31.249 · Cited by 54
Molecular layer deposition of a hafnium-based hybrid thin film as an electron beam resist
Shi, J., Ravi, A., Richey, N. E., Gong, H., & Bent, S. F. (2022) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.2c04092 · Cited by 54 · cited 1×
“For instance, Shi et al. used MALD to prepare Hf-based hybrid lms that exhibit negative-tone resist characteristics due to their selective dissolution dissolution behavior under electron beam exposure [39].”
MethodMixed-ligand zinc-oxoclusters: Efficient chemistry for high resolution nanolithography
Thakur, N., Bliem, R., Mochi, I., Vockenhuber, M., Ekinci, Y., & Castellanos, S. (2020) · Journal of Materials Chemistry C · doi:10.1039/d0tc03597a · Cited by 52
Mechanistic insights in Zr-and Hf-based molecular hybrid EUV photoresists
Wu, L., Baljozovic, M., Portale, G., Kazazis, D., Vockenhuber, M., Jung, T., Ekinci, Y., & Castellanos Ortega, S. (2019) · Journal of Micro/Nanopatterning Materials and Metrology · doi:10.1117/1.jmm.18.1.013504 · Cited by 49 · cited 1×
“It is often used for post-exposure analysis to understand chemical changes and sensitivity trends in a metal oxide photoresist [86].”
BackgroundOverview of materials and processes for lithography
Lawson, R. A., & Robinson, A. P. G. (2016) · Frontiers of nanoscience · doi:10.1016/b978-0-08-100354-1.00001-6 · Cited by 48 · cited 1×
“[7], 2016, Elsevier) ( d ) Definitions of line edge roughness and line width roughness (reprinted with permission from ref.”
BackgroundEvolution of patterning materials towards the Moore’s Law 2.0 Era
Goldfarb, D. L. (2022) · Japanese Journal of Applied Physics · doi:10.35848/1347-4065/ac5534 · Cited by 47 · cited 1×
“According to Rayleigh’s criterion, shorter wavelength light sources enable the creation of nanostructures with smaller feature sizes [4].”
BackgroundNon-alkyl tin-oxo clusters as new-type patterning materials for nanolithography
Wang, D., Yi, X., & Zhang, L. (2022) · Science China Chemistry · doi:10.1007/s11426-021-1092-2 · Cited by 42
Diulus, J. T., Frederick, R. T., Li, M., Hutchison, D. C., Olsen, M. R., Lyubinetsky, I., Árnadóttir, L., Garfunkel, E. L., Nyman, M., Ogasawara, H., et al. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b19302 · Cited by 40 · cited 4×
“The data collected from the spectrometer play a crucial role in evaluating and optimizing the performance of photoresists in lithographic processes [79].”
BackgroundMethodInfluentialChemical and structural investigation of zinc-oxo cluster photoresists for DUV lithography
Yeh, C., Liu, H.-C., Heni, W., Berling, D., Zan, H., & Soppera, O. (2017) · Journal of Materials Chemistry C · doi:10.1039/c6tc05201k · Cited by 38
UV and VUV-induced fragmentation of tin-oxo cage ions
Haitjema, J., Wu, L., Giuliani, A., Nahon, L., Castellanos, S., & Brouwer, A. M. (2021) · Physical Chemistry Chemical Physics · doi:10.1039/d1cp03148a · Cited by 36 · cited 2×
“…employed for hafnium oxide nanoparticles: Jarich et al.’s study examines UV and vacuum UV fragmentation and ionization pathways of tin–oxygen cage cations and monocationic complexes to understand fundamental photochemistry that can inform the development of improved EUV photoresist materials [66].”
BackgroundExtreme ultraviolet photoemission of a tin-based photoresist
Zhang, Y., Haitjema, J., Castellanos, S., Lugier, O., Sadegh, N., Ovsyannikov, R., Giangrisostomi, E., Johansson, F. O. L., Berggren, E., Lindblad, A., et al. (2021) · Applied Physics Letters · doi:10.1063/5.0047269 · Cited by 35
Resistless EUV lithography: Photon-induced oxide patterning on silicon
Tseng, L.-T., Karadan, P., Kazazis, D., Constantinou, P. C., Stock, T. J. Z., Curson, N. J., Schofield, S. R., Muntwiler, M., Aeppli, G., & Ekinci, Y. (2023) · Science Advances · doi:10.1126/sciadv.adf5997 · Cited by 34 · cited 1×
“Since 2019, following two decades of maturation, EUVL has become the leading lithography technique for high-volume manufacturing (HVM), replacing traditional deep ultraviolet lithography (DUVL) and its predecessor, visible light lithography (VLL) [2,3].”
MethodInfluentialHybrid EUV Resists with Mixed Organic Shells: A Simple Preparation Method
Wu, L., Liu, J., Vockenhuber, M., Ekinci, Y., & Castellanos, S. (2019) · European Journal of Inorganic Chemistry · doi:10.1002/ejic.201900745 · Cited by 33 · cited 1×
“Various strategies, including using different ligands [74] and multiple ligands [75], have been explored to address these challenges.”
BackgroundZn-Ti oxo cluster photoresists for EUV Lithography: Cluster structure and lithographic performance
Wang, D., Xu, R., Zhou, D., Zhao, J., Zhang, J., Chen, P., & Peng, X. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.152315 · Cited by 33 · cited 2×
“On the one hand, both valence and internal valence electrons can be excited by high-energy EUV photons, producing photo-emitted electrons that initiate reactions in the surrounding material, generating secondary electrons [11].”
BackgroundInspection in Semiconductor Manufacturing
Sankaran, V., Weber, C. M., Lakhani, F., & Tobin, K. W. (1999) · Wiley Encyclopedia of Electrical and Electronics Engineering · doi:10.1002/047134608x.w5532 · Cited by 33 · cited 1×
“Microscopic methods are widely used for assessing pattern fidelity, LER, and other critical parameters in photolithography processes [80].”
MethodImmunosensor based on nanocomposite of nanostructured zirconium oxide and gelatin-A
Bagbi, Y., Sharma, A., Bohidar, H. B., & Solanki, P. R. (2016) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2015.10.074 · Cited by 29 · cited 1×
“Among the category of transition metal oxides, including titanium (Ti), zirconium (Zr), hafnium (Hf), cobalt (Co ) , tin (Sn), and zinc (Zn), zirconium oxides (ZrO 2 ) emerge as the most viable alternatives for resist materials owing to their relatively low toxicity and cost [70,71].”
BackgroundWang, G., Qin, C., Yin, H., Luo, J., Duan, N., Yang, P., Gao, X., Yang, T., Li, J., Jiang, Y. L., et al. (2016) · Microelectronic Engineering · doi:10.1016/j.mee.2016.06.002 · Cited by 29 · cited 1×
“This technique, implementable via ALD or chemical vapor deposition (CVD), allows for the targeted growth of thin films on specific regions of a substrate, supporting applications such as selective epitaxial growth [31] and cobalt capping of copper [32] (Figure 5a).”
MethodNaqvi, B. A., Enomoto, S., Machida, K., Takata, Y., Kozawa, T., Muroya, Y., De Gendt, S., & De Simone, D. (2024) · Chemistry of Materials · doi:10.1021/acs.chemmater.3c02628 · Cited by 29 · cited 2×
“These secondary electrons have enough energy to excite additional atoms, creating a cascade of electron interactions [10].”
BackgroundInvestigation of novel inorganic resist materials for EUV lithography
Krysak, M. E., Blackwell, J. M., Putna, S., Leeson, M. J., Younkin, T. R., Harlson, S., Frasure, K., & Gstrein, F. (2014) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.2046677 · Cited by 28
Kataoka, S., & Sue, K. (2022) · European Journal of Inorganic Chemistry · doi:10.1002/ejic.202200050 · Cited by 26 · cited 7×
“This Zr oxo cluster, featuring a Zr core surrounded by methacrylate and acetate ligands, exhibits a size comparable to Zr 6 O 4 ( OH ) 4 ( methacrylate ) 12 clusters but demonstrates improved solubility in a variety of organic solvents [76].”
BackgroundMethodResultInfluentialAtomic layer deposition and its derivatives for extreme ultraviolet (EUV) photoresist applications
Le, D. N., Park, T., Hwang, S. M., Kim, J.-H., Jung, Y. C., Tiwale, N., Subramanian, A., Lee, W.-I., Choi, R., Sung, M. M., et al. (2023) · Japanese Journal of Applied Physics · doi:10.35848/1347-4065/acce43 · Cited by 26 · cited 8×
“This method enhances EUV absorption, mechanical strength, and etch resistance, which are critical for maintaining pattern fidelity at ultrafine scales [30].”
BackgroundMethodInfluentialGross, S., Trimmel, G., Schubert, U., & Noto, V. D. (2002) · Polymers for Advanced Technologies · doi:10.1002/pat.183 · Cited by 26
Gaskins, B. C., & Lannutti, J. J. (1996) · Journal of Materials Research · doi:10.1557/jmr.1996.0246 · Cited by 26 · cited 1×
“Additionally, BaTiO 3 nanocrystals synthesized using this approach exhibit high crystallinity, crucial for their use in piezoelectric and ferroelectric devices [57].”
MethodHistory of extreme ultraviolet lithography
Kinoshita, H. (2005) · Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena · doi:10.1116/1.2127950 · Cited by 25 · cited 1×
“At the end of the 20th century, EUVL emerged as a promising technology for high-resolution patterning in semiconductor manufacturing [1].”
BackgroundExposure Tool Development Toward Advanced EUV Lithography: A Journey of 40 Years Driving Moore’s Law
Schoot, J. V. (2024) · IEEE Electron Devices Magazine · doi:10.1109/med.2023.3337129 · Cited by 25 · cited 1×
“The energy from the electrons is dissipated through multiple inelastic collisions, resulting in a broad distribution of lower-energy secondary electrons (LEEs) capable of inducing further chemical changes within the resist [12].”
BackgroundEUV resist requirements: absorbance and acid yield
Gronheid, R., Fonseca, C., Leeson, M. J., Adams, J. R., Strahan, J. R., Willson, C. G., & Smith, B. W. (2009) · SPIE Proceedings · doi:10.1117/12.814716 · Cited by 23 · cited 2×
“XPS analysis revealed significant changes in the high-resolution spectra of C 1s, O 1s, and F 1s, including the formation of Zn-F bonds and a reduction in carboxylate (O-CQO) components. resists due to the e ff ects of photon shot noise [88].”
BackgroundToriumi, M., Sato, Y., Koshino, M., Suenaga, K., & Itani, T. (2016) · Applied Physics Express · doi:10.7567/apex.9.031601 · Cited by 22 · cited 1×
“Subsequently, Zr 6 O 4 ( OH ) 4 ( methacrylate ) 12 clusters were employed for higher-resolution lithography [72].”
MethodDemonstration of an N7 integrated fab process for metal oxide EUV photoresist
De Simone, D., Mao, M., Kocsis, M., De Schepper, P., Lazzarino, F., Vandenberghe, G., Stowers, J., Meyers, S., Clark, B. L., Grenville, A., et al. (2016) · SPIE Proceedings · doi:10.1117/12.2220051 · Cited by 21 · cited 1×
“This marks a crucial step in advancing EUV lithography for next-generation semiconductor manufacturing [98].”
BackgroundA review of nanoimprint lithography for high-volume semiconductor device manufacturing
Resnick, D. J., & Choi, J. (2017) · Advanced Optical Technologies · doi:10.1515/aot-2017-0020 · Cited by 17 · cited 1×
“Specifically, in the ArF, KrF, and g/i-line photoresist segments, Japanese manufacturers dominate with market shares of 93%, 80%, and 61%, respectively, underscoring their strong position in the high-end market [96,97].”
BackgroundDependence of Cu electromigration resistance on selectively deposited CVD Co cap thickness
Yang, C.-C., Baumann, F. H., Wang, P.-C., Lee, S.-Y., Ma, P., AuBuchon, J. F., & Edelstein, D. C. (2013) · Microelectronic Engineering · doi:10.1016/j.mee.2013.01.001 · Cited by 16
Characterization of 'metal resist' for EUV lithography
Toriumi, M., Sato, Y., Kumai, R., Yamashita, Y., Tsukiyama, K., & Itani, T. (2016) · SPIE Proceedings · doi:10.1117/12.2219030 · Cited by 16 · cited 3×
“Toriumi et al. investigated photoresists made of metal oxides and organic molecules, focusing on composites of zirconium oxide (𝑍𝑟𝑂𝑥), titanium oxide (𝑇𝑖𝑂𝑥), and meth-acrylic acid (MAA) ligands [26].”
BackgroundMethodInfluentialDirectly Photopatternable Polythiophene as Dual-Tone Photoresist
Hu, X., Lawrence, J. A., Mullahoo, J., et al. (2017) · Macromolecules · doi:10.1021/acs.macromol.7b01208 · Cited by 16 · cited 2×
“TGA results (Figure 13b) indicated that water This dual-tone capability enhances pa tt erning fl exi-bility and precision [90]. during post-exposure baking at 150 C reduced the solubility of the unexposed Additionally, 𝑇𝑖𝑛𝑂𝐻 shows high sensitivity to EUV and electron beam exposure, allowing…”
BackgroundAdvanced metrology needs for nanoelectronics lithography
Knight, S. E., Dixson, R. G., Jones, R. L., et al. (2006) · Comptes Rendus Physique · doi:10.1016/j.crhy.2006.10.004 · Cited by 15 · cited 1×
“CD-SEM helps to control the lithography process and allows for making adjustments in the process parameters in case any deviations are detected [84].”
BackgroundSequential infiltration synthesis for line edge roughness mitigation of EUV resist
Baryshnikova, M., De Simone, D., Knaepen, W., Kachel, K., Chan, B., Paolillo, S., Willem Maes, J., De Roest, D., Rincon Delgadillo, P., & Vandenberghe, G. (2017) · Journal of Photopolymer Science and Technology · doi:10.2494/photopolymer.30.667 · Cited by 15 · cited 2×
“…improving etch resistance and structural integrity [37]. process has successfully reduced LER in EUV polymer-based resists by introducing trimethylaluminum (TMA) and water to form aluminum oxide (AlO x ) networks within the resist structure, improving etch resistance and structural integrity [37].”
BackgroundRonse, K. (2024) · IEEE Electron Devices Magazine · doi:10.1109/med.2023.3336276 · Cited by 14 · cited 1×
“Since 2019, following two decades of maturation, EUVL has become the leading lithography technique for high-volume manufacturing (HVM), replacing traditional deep ultraviolet lithography (DUVL) and its predecessor, visible light lithography (VLL) [2,3].”
MethodInfluentialThe paradox of value, directed technical change, and the relative abundance of the chemical elements
Boyce, J. R. (2019) · Resource and Energy Economics · doi:10.1016/j.reseneeco.2019.101114 · Cited by 13 · cited 1×
“Among the category of transition metal oxides, including titanium (Ti), zirconium (Zr), hafnium (Hf), cobalt (Co ) , tin (Sn), and zinc (Zn), zirconium oxides (ZrO 2 ) emerge as the most viable alternatives for resist materials owing to their relatively low toxicity and cost [70,71].”
BackgroundPhoton-induced Fragmentation of Zinc-based Oxoclusters for EUV Lithography Applications
Thakur, N., Giuliani, A., Nahon, L., & Castellanos, S. (2020) · Journal of Photopolymer Science and Technology · doi:10.2494/photopolymer.33.153 · Cited by 11 · cited 7×
“Thakur et al. [19] explored fluorine-rich zinc-based oxygen clusters with trifluo-romethacrylate (TFMA) ligands to enhance EUV absorption, taking advantage of the significantly higher molar absorption cross-section of fluorine compared to hydrogen and carbon.”
BackgroundMethodInfluentialEnabling CD SEM metrology for 5nm technology node and beyond
Lorusso, G. F., Ohashi, T., Yamaguchi, A., Inoue, O., Sutani, T., Horiguchi, N., Bömmels, J., Wilson, C. J., Briggs, B., Tan, C. L., et al. (2017) · SPIE Proceedings · doi:10.1117/12.2257468 · Cited by 11 · cited 1×
“A specific type of SEM, critical dimension scanning electron microscopy (CD-SEM), is currently the standard tool in the semiconductor industry for precise measurement of LER and LWR [83].”
MethodLe, D. N., Hwang, S. M., Woo, J., Choi, S., Park, T., Veyan, J.-F., Tiwale, N. M., Subramanian, A., Lee, W.-I., Nam, C.-Y., et al. (2022) · International Conference on Extreme Ultraviolet Lithography 2022 · doi:10.1117/12.2641647 · Cited by 11 · cited 1×
“( b ) Workflow Molecular atomic layer deposition (MALD) Further research by Le et al. explored MALD films composed of TMA and hydro-quinone (HQ), demonstrating the utility of the technique in generating negative-tone patterns using low-energy electron exposure [40].”
MethodStudy of Dill's B parameter measurement of EUV resist
Sekiguchi, A., Matsumoto, Y., Harada, T., Watanabe, T., & Kinoshita, H. (2015) · SPIE Proceedings · doi:10.1117/12.2082883 · Cited by 10
Lutker-Lee, K., Church, J., Miller, E. R., Raley, A., & Meli, L. (2022) · Journal of Vacuum Science & Technology B Nanotechnology and Microelectronics Materials Processing Measurement and Phenomena · doi:10.1116/6.0001665 · Cited by 10 · cited 1×
“Recent advancements have expanded ASD’s application to post-development steps in EUV lithography, where selective deposition on EUV patterned resists significantly reduces defect densities and improves pattern fidelity [33,34] (Figure 5b).”
BackgroundEUV metal oxide hybrid photoresists: ultra-small structures for high-resolution patterning
Kasahara, K., Kosma, V., Sakai, K., Giannelis, E. P., Ober, C. K., Yang, K., & Xu, H. (2018) · Extreme Ultraviolet (EUV) Lithography · doi:10.1117/12.2297266 · Cited by 9 · cited 1×
“Despite offering enhanced resolution, the lower sensitivity compared to ZrO 2 nanoparticles [73], in addition to the low solubility of Zr 6 O 4 in development solvents [74], poses a significant challenge for its use as a photoresist.”
BackgroundClarke, J. S., Schmidt, M. B., & Orji, N. G. (2007) · Journal of Vacuum Science & Technology B Microelectronics and Nanometer Structures Processing Measurement and Phenomena · doi:10.1116/1.2804516 · Cited by 9 · cited 1×
“SEM can also be used to obtain cross-sectional images of the photoresist, providing timely details on its vertical structure, thereby accelerating the iterative process of photoresist development and increasing throughput [82].”
MethodPark, J. Y., Song, H.-J., Nguyen, T. C., Son, W.-J., Kim, D., Song, G., Hong, S.-K., Go, H., Park, C., Jang, I., et al. (2023) · Molecules · doi:10.3390/molecules28176244 · Cited by 9 · cited 1×
“In EUVL, these processes take place only after non-chemical interactions, as illustrated in Figure 1b [6].”
MethodLine roughness improvements on EUV 36nm pitch pattern by plasma treatment method
Wada, T., Hsieh, C.-Y., Ko, A., & Biolsi, P. (2019) · Advanced Etch Technology for Nanopatterning VIII · doi:10.1117/12.2514764 · Cited by 8 · cited 2×
“Recent advancements have expanded ASD’s application to post-development steps in EUV lithography, where selective deposition on EUV patterned resists significantly reduces defect densities and improves pattern fidelity [33,34] (Figure 5b).”
BackgroundThe study of high-sensitivity metrology method by using CD-SEM
Ueda, K., Koshihara, S., Mizuno, T., & Miura, A. (2011) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.878946 · Cited by 7 · cited 1×
“Moreover, it provides consistent measurement repeatability at specific points across the device [85].”
BackgroundAdvanced Photoresists: Development, Application and Market
Tang, Y. (2023) · Highlights in Science Engineering and Technology · doi:10.54097/hset.v29i.4215 · Cited by 6 · cited 1×
“Specifically, in the ArF, KrF, and g/i-line photoresist segments, Japanese manufacturers dominate with market shares of 93%, 80%, and 61%, respectively, underscoring their strong position in the high-end market [96,97].”
BackgroundLiu, E., Lutker-Lee, K., Lou, Q., Chen, Y.-M., Raley, A., Biolsi, P., Yu, K.-H., & Denbeaux, G. (2021) · Journal of Micro/Nanopatterning, Materials, and Metrology · doi:10.1117/1.jmm.20.2.024901 · Cited by 5 · cited 1×
“Furthermore, Liu et al. showed that ASD integration with EUV self-aligned double patterning leads to a progressive decrease in LER as feature critical dimension (CD) reduces [35].”
BackgroundNovel metal-oxide photoresist materials for extreme UV lithography
Simone, D. D., Mao, M., & Vandenberghe, G. (2016) · SPIE Newsroom · doi:10.1117/2.1201606.006534 · Cited by 3 · cited 1×
“It can be used at different phases of the pattern transfer process to investigate the quality and accuracy of the patterned features, such as uniformity and smoothness of the photoresist layer [81].”
BackgroundHafnium Zirconium Oxide Thin Films for CMOS Compatible Pyroelectric Infrared Sensors
Mart, C., Czernohorsky, M., Kühnel, K., & Weinreich, W. (2021) · The 8th International Symposium on Sensor Science · doi:10.3390/i3s2021dresden-10138 · Cited by 2
Infrared nanospectroscopy characterization of metal oxide photoresists
Zhao, X., Wu, C. H. (., Bechtel, H. A., Weidman, T., & Salmeron, M. B. (2022) · Journal of Micro/Nanopatterning, Materials, and Metrology · doi:10.1117/1.jmm.21.4.041408 · Cited by 2 · cited 2×
“Therefore, nano-IR is usually combined with atomic force microscopy (AFM) by integrating the IR beam onto the AFM probe [78].”
MethodZINC-BASED PHOTORESIST FOR HIGH-RESOLUTION EUV (EXTREME ULTRAVIOLET) LITHOGRAPHY
Yang, K. (2019) · Cornell University Library · doi:10.7298/adrq-np68
Cited by
Basu, P., Verma, J., Abhinav, V., Ratnesh, R. K., Singla, Y. K., & Kumar, V. (2025) · International Journal of Molecular Sciences · doi:10.3390/ijms26073027 · Cited by 98
Advances in metal-based photoresist materials for EUV lithography and lithographic mechanisms
Wang, Y., Yu, H., Wang, L., Zhang, Y., Zhu, Z., Zhang, Y., Lu, Y., & Ouyang, C. (2025) · Journal of Materials Chemistry A · doi:10.1039/d5ta04194e · Cited by 17
Liu, Z., Chen, J., Yu, T., Zeng, Y. P., Guo, X., Wang, S., Hu, R., Vockenhuber, M., Tian, P., Kazazis, D., et al. (2025) · ACS Applied Electronic Materials · doi:10.1021/acsaelm.5c00273 · Cited by 9
The Evolution of Lithography: From Resolution Scaling to Manufacturing Constraints
Chae, H., Park, H., & Kang, D. J. (2026) · Micromachines · doi:10.3390/mi17020261 · Cited by 13
Li, H., An, H., Chen, J., Yu, T., Zeng, Y. P., Wang, S., Guo, X., Hu, R., Zhao, J., Wu, Y., et al. (2025) · Chinese Journal of Chemistry · doi:10.1002/cjoc.70379 · Cited by 6
Metadata
- Authors
- Hasan, M. W., Deeb, L., Kumaniaev, S., Wei, C., & Wang, K.
- Affiliations
- University of South-Eastern Norway (NO)
- Corresponding author
- Wang, Kaiying
- ORCID
- Wang, Kaiying
- Venue
- Micromachines
- Publisher
- MDPI AG
- Published
- 2024-08-31
- Volume
- 15
- Issue
- 9
- Pages
- 1122
- ISSN
- 2072-666X (ISSN-L)
- PMC
- PMC11433861
- OpenAlex
- W4402137876
- Cited by
- 35
- References
- 101
- Citations by year
- 2026: 21 · 2025: 14
- FWCI
- 0.72
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Micromachines (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advancements in Photolithography Techniques
- Physical Sciences › Materials Science › Surfaces, Coatings and Films › Nanofabrication and Lithography Techniques
- Physical Sciences › Chemistry › Organic Chemistry › Photopolymerization techniques and applications
- Keywords
- EUV lithography, zinc oxide nanoparticles, SnO2 nanoparticles, photochemical reactions, ligands, crosslinking, film density, solubility, photon absorption, semiconductor patterning, pyroelectric infrared sensor, 3D printing
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.