The DOI matches its Crossref record; 159 of the 159 references it cites were found in a registry or an index.
Additive Manufacturing of Polymer Materials: Progress, Promise and Challenges
Open accessAbstract
The use of additive manufacturing (AM) has moved well beyond prototyping and has been established as a highly versatile manufacturing method with demonstrated potential to completely transform traditional manufacturing in the future. In this paper, a comprehensive review and critical analyses of the recent advances and achievements in the field of different AM processes for polymers, their composites and nanocomposites, elastomers and multi materials, shape memory polymers and thermo-responsive materials are presented. Moreover, their applications in different fields such as bio-medical, electronics, textiles, and aerospace industries are also discussed. We conclude the article with an account of further research needs and future perspectives of AM process with polymeric materials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Polymers for 3D Printing and Customized Additive Manufacturing
Ligon, S. C., Liska, R., Stampfl, J., Gurr, M., & Mülhaupt, R. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00074 · Cited by 3,741
Gibson, I., Rosen, D., & Stucker, B. (2015) · doi:10.1007/978-1-4939-2113-3 · Cited by 3,299
Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A. (2016) · Nature Materials · doi:10.1038/nmat4544 · Cited by 3,027
Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing
Gibson, I., Rosen, D. W., & Stucker, B. (2010) · National University of Singapore · doi:10.1007/978-1-4419-1120-9 · Cited by 2,969
A Review of Additive Manufacturing
Wong, K. V., & Hernandez, A. (2012) · ISRN Mechanical Engineering · doi:10.5402/2012/208760 · Cited by 2,555
An Overview on 3D Printing Technology: Technological, Materials, and Applications
Shahrubudin, N., Lee, T. C., & Ramlan, R. (2019) · Procedia Manufacturing · doi:10.1016/j.promfg.2019.06.089 · Cited by 2,050
Embedded 3D Printing of Strain Sensors within Highly Stretchable Elastomers
Muth, J. T., Vogt, D. M., Truby, R. L., Mengüç, Y., Kolesky, D. B., Wood, R. J., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201400334 · Cited by 1,611
Fundamentals and applications of 3D printing for novel materials
Lee, J.-Y., An, J., & Chua, C. K. (2017) · Applied Materials Today · doi:10.1016/j.apmt.2017.02.004 · Cited by 1,354
Stimuli-responsive polymers and their applications
Wei, M., Gao, Y., Li, X., & Serpe, M. J. (2017) · Polymer Chemistry · doi:10.1039/c6py01585a · Cited by 1,298
Momeni, F., M.Mehdi Hassani.N, S., Liu, X., & Ni, J. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.02.068 · Cited by 1,165
Advances in 4D Printing: Materials and Applications
Kuang, X., Roach, D. J., Wu, J., Hamel, C. M., Ding, Z., Wang, T., Dunn, M. L., & Qi, H. J. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201805290 · Cited by 1,095
Additive manufacturing of multi-material structures
Bandyopadhyay, A., & Heer, B. (2018) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2018.04.001 · Cited by 1,029
Glass fiber-reinforced polymer composites – a review
Sathishkumar, T., Satheeshkumar, S., & Naveen, J. (2014) · Journal of Reinforced Plastics and Composites · doi:10.1177/0731684414530790 · Cited by 991
Fused deposition modeling with polypropylene
Carneiro, O. S., Silva, A. F., & Gomes, R. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.06.053 · Cited by 851
Denudation of metal powder layers in laser powder bed fusion processes
Matthews, M. J., Guss, G., Khairallah, S. A., Rubenchik, A. M., Depond, P. J., & King, W. E. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.05.017 · Cited by 809
Dickson, A. N., Barry, J. N., McDonnell, K. A., & Dowling, D. P. (2017) · Additive Manufacturing · doi:10.1016/j.addma.2017.06.004 · Cited by 792
Active materials by four-dimension printing
Ge, Q., Qi, H. J., & Dunn, M. L. (2013) · Applied Physics Letters · doi:10.1063/1.4819837 · Cited by 785
A review of particulate reinforcement theories for polymer composites
Ahmed, S., & Jones, F. R. (1990) · Journal of Materials Science · doi:10.1007/bf00580110 · Cited by 781
Gonzalez-Gutierrez, J., Cano, S., Schuschnigg, S., Kukla, C., Sapkota, J., & Holzer, C. (2018) · Materials · doi:10.3390/ma11050840 · Cited by 713
4D Bioprinting for Biomedical Applications
Gao, B., Yang, Q., Zhao, X., Jin, G., Ma, Y., & Xu, F. (2016) · Trends in Biotechnology · doi:10.1016/j.tibtech.2016.03.004 · Cited by 711
A critical review on the fused deposition modeling of thermoplastic polymer composites
Penumakala, P. K., Santo, J., & Thomas, A. (2020) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2020.108336 · Cited by 704
Paolini, A., Kollmannsberger, S., & Rank, E. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2019.100894 · Cited by 673
Recent Progress in Additive Manufacturing of Fiber Reinforced Polymer Composite
Goh, G. D., Yap, Y. L., Agarwala, S., & Yeong, W. Y. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201800271 · Cited by 621
Farahani, R. D., Dubé, M., & Therriault, D. (2016) · Advanced Materials · doi:10.1002/adma.201506215 · Cited by 604
Active printed materials for complex self-evolving deformations
Raviv, D., Zhao, W., McKnelly, C., Papadopoulou, A., Kadambi, A., Shi, B., Hirsch, S., Dikovsky, D., Zyracki, M., Olguin, C., et al. (2014) · Scientific Reports · doi:10.1038/srep07422 · Cited by 568
Daminabo, S. C., Goel, S., Grammatikos, S. A., Nezhad, H. Y., & Thakur, V. K. (2020) · Materials Today Chemistry · doi:10.1016/j.mtchem.2020.100248 · Cited by 567
Additively manufactured carbon fiber-reinforced composites: State of the art and perspective
van de Werken, N., Tekinalp, H., Khanbolouki, P., Ozcan, S., Williams, A., & Tehrani, M. (2020) · Additive Manufacturing · doi:10.1016/j.addma.2019.100962 · Cited by 566
3D Printing of Polymer Nanocomposites via Stereolithography
Manapat, J. Z., Chen, Q., Ye, P., & Advincula, R. C. (2017) · Macromolecular Materials and Engineering · doi:10.1002/mame.201600553 · Cited by 565
Application of Directed Energy Deposition-Based Additive Manufacturing in Repair
Saboori, A., Aversa, A., Marchese, G., Biamino, S., Lombardi, M., & Fino, P. (2019) · Applied Sciences · doi:10.3390/app9163316 · Cited by 537
4D Printing with Mechanically Robust, Thermally Actuating Hydrogels
Bakarich, S. E., Gorkin, R., Panhuis, M. I. H., & Spinks, G. M. (2015) · Macromolecular Rapid Communications · doi:10.1002/marc.201500079 · Cited by 526
Polymeric composites for powder-based additive manufacturing: Materials and applications
Yuan, S., Shen, F., Chua, C. K., & Zhou, K. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.11.001 · Cited by 525
A self-healing carbon fibre reinforced polymer for aerospace applications
Williams, G., Trask, R., & Bond, I. (2007) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2007.01.013 · Cited by 518
Morrison, R. J., Hollister, S. J., Niedner, M. F., Mahani, M. G., Park, A. H., Mehta, D. K., Ohye, R. G., & Green, G. E. (2015) · Science Translational Medicine · doi:10.1126/scitranslmed.3010825 · Cited by 498
Additive manufacturing — A review of 4D printing and future applications
Mitchell, A., Lafont, U., Hołyńska, M., & Semprimoschnig, C. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.10.038 · Cited by 494
Recent Advances in Extrusion‐Based 3D Printing for Biomedical Applications
Placone, J. K., & Engler, A. J. (2018) · Advanced Healthcare Materials · doi:10.1002/adhm.201701161 · Cited by 486
Digital light processing 3D printed silk fibroin hydrogel for cartilage tissue engineering
Hong, H., Seo, Y. B., Kim, D. Y., Lee, J. S., Lee, Y. J., Lee, H., Ajiteru, O., Sultan, M. T., Lee, O. J., Kim, S. H., et al. (2020) · Biomaterials · doi:10.1016/j.biomaterials.2019.119679 · Cited by 473
Fatigue Properties of Highly Oriented Polypropylene Tapes and All-Polypropylene Composites
Barkoula, N.-M., Alcock, B., Cabrera, N. O., & Peijs, T. (2008) · Polymers and Polymer Composites · doi:10.1177/096739110801600203 · Cited by 465
Additive-manufactured (3D-printed) electrochemical sensors: A critical review
Cardoso, R. M., Kalinke, C., Rocha, R. G., dos Santos, P. L., Rocha, D. P., Oliveira, P. R., Janegitz, B. C., Bonacin, J. A., Richter, E. M., & Munoz, R. A. A. (2020) · Analytica Chimica Acta · doi:10.1016/j.aca.2020.03.028 · Cited by 460
Mohan, N., Senthil, P., Vinodh, S., & Jayanth, N. (2017) · Virtual and Physical Prototyping · doi:10.1080/17452759.2016.1274490 · Cited by 457
Additive manufacturing in unmanned aerial vehicles (UAVs): Challenges and potential
Goh, G. D., Agarwala, S., Goh, G. L., Dikshit, V., Sing, S. L., & Yeong, W. Y. (2017) · Aerospace Science and Technology · doi:10.1016/j.ast.2016.12.019 · Cited by 413
4D printing of polymeric materials for tissue and organ regeneration
Miao, S., Castro, N., Nowicki, M., Xia, L., Cui, H., Zhou, X., Zhu, W., Lee, S.-J., Sarkar, K., Vozzi, G., et al. (2017) · Materials Today · doi:10.1016/j.mattod.2017.06.005 · Cited by 408
Vat polymerization-based bioprinting—process, materials, applications and regulatory challenges
Ng, W. L., Lee, J. M., Zhou, M., Chen, Y.-W., Lee, K.-X. A., Yeong, W. Y., & Shen, Y.-F. (2020) · Biofabrication · doi:10.1088/1758-5090/ab6034 · Cited by 402
Advances in Extrusion 3D Bioprinting: A Focus on Multicomponent Hydrogel‐Based Bioinks
Cui, X., Li, J., Hartanto, Y., Durham, M., Tang, J., Zhang, H., Hooper, G., Lim, K., & Woodfield, T. (2020) · Advanced Healthcare Materials · doi:10.1002/adhm.201901648 · Cited by 383
Digital Light Processing Based Three-dimensional Printing for Medical Applications
Zhang, J., Hu, Q., Wang, S., Tao, J., & Gou, M. (2019) · International Journal of Bioprinting · doi:10.18063/ijb.v6i1.242 · Cited by 359
Sutton, A. T., Kriewall, C. S., Leu, M. C., & Newkirk, J. W. (2017) · Virtual and Physical Prototyping · doi:10.1080/17452759.2016.1250605 · Cited by 354
Nielsen, A. V., Beauchamp, M. J., Nordin, G. P., & Woolley, A. T. (2020) · Annual Review of Analytical Chemistry · doi:10.1146/annurev-anchem-091619-102649 · Cited by 339
Metal Binder Jetting Additive Manufacturing: A Literature Review
Li, M., Du, W., Elwany, A., Pei, Z., & Ma, C. (2020) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4047430 · Cited by 334
Two-Way 4D Printing: A Review on the Reversibility of 3D-Printed Shape Memory Materials
Lee, A. Y., An, J., & Chua, C. K. (2017) · Engineering · doi:10.1016/j.eng.2017.05.014 · Cited by 326
Melnikova, R., Ehrmann, A., & Finsterbusch, K. (2014) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/62/1/012018 · Cited by 326
Programming 2D/3D shape-shifting with hobbyist 3D printers
van Manen, T., Janbaz, S., & Zadpoor, A. A. (2017) · Materials Horizons · doi:10.1039/c7mh00269f · Cited by 321
Yang, Y., Chen, Z., Song, X., Zhang, Z., Zhang, J., Shung, K. K., Zhou, Q., & Chen, Y. (2017) · Advanced Materials · doi:10.1002/adma.201605750 · Cited by 316
Recent Progress of Self‐Powered Sensing Systems for Wearable Electronics
Lou, Z., Li, L., Wang, L., & Shen, G. (2017) · Small · doi:10.1002/smll.201701791 · Cited by 309
King, W., Anderson, A. T., Ferencz, R. M., Hodge, N. E., Kamath, C., & Khairallah, S. A. (2015) · Materials Science and Technology · doi:10.1179/1743284714y.0000000728 · Cited by 308
Yuan, S., Shen, F., Bai, J., Chua, C. K., Wei, J., & Zhou, K. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.01.098 · Cited by 295
Chua, C. K., & Leong, K. F. (2017) · WORLD SCIENTIFIC eBooks · doi:10.1142/10200 · Cited by 294
Additive Manufacturing: Unlocking the Evolution of Energy Materials
Zhakeyev, A., Wang, P., Zhang, L., Shu, W., Wang, H., & Xuan, J. (2017) · Advanced Science · doi:10.1002/advs.201700187 · Cited by 291
A Review on Binder Jet Additive Manufacturing of 316L Stainless Steel
Mirzababaei, S., & Pasebani, S. (2019) · Journal of Manufacturing and Materials Processing · doi:10.3390/jmmp3030082 · Cited by 290
Tao, J., Liu, N., Ma, W., Ding, L., Li, L., Su, J., & Gao, Y. (2013) · Scientific Reports · doi:10.1038/srep02286 · Cited by 287
Toward real applications of conductive polymers
Kuhn, H. H., Child, A. D., & Kimbrell, W. C. (1995) · Synthetic Metals · doi:10.1016/0379-6779(94)03198-f · Cited by 279
Breakthrough in the printing tactics for stimuli-responsive materials: 4D printing
Rastogi, P., & Kandasubramanian, B. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.02.085 · Cited by 267
Kadry, H., Wadnap, S., Xu, C., & Ahsan, F. (2019) · European Journal of Pharmaceutical Sciences · doi:10.1016/j.ejps.2019.05.008 · Cited by 265
Polymer Nanocomposites for Aerospace Applications: Properties
Njuguna, J., & Pielichowski, K. (2003) · Advanced Engineering Materials · doi:10.1002/adem.200310101 · Cited by 261
Laminated Object Manufacturing of 3D‐Printed Laser‐Induced Graphene Foams
Luong, D. X., Subramanian, A. K., Silva, G. A. L., Yoon, J., Cofer, S., Yang, K., Owuor, P. S., Wang, T., Wang, Z., Lou, J., et al. (2018) · Advanced Materials · doi:10.1002/adma.201707416 · Cited by 257
Science in three dimensions: The print revolution
Jones, N. (2012) · Nature · doi:10.1038/487022a · Cited by 249
Direct 3D printing of polymers onto textiles: experimental studies and applications
Pei, E., Shen, J., & Watling, J. (2015) · Rapid Prototyping Journal · doi:10.1108/rpj-09-2014-0126 · Cited by 240
Hung, W.-S., An, Q.-F., De Guzman, M., Lin, H.-Y., Huang, S.-H., Liu, W.-R., Hu, C.-C., Lee, K.-R., & Lai, J.-Y. (2014) · Carbon · doi:10.1016/j.carbon.2013.11.048 · Cited by 239
Responsive cellulose-hydrogel composite ink for 4D printing
Mulakkal, M. C., Trask, R. S., Ting, V. P., & Seddon, A. M. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.09.009 · Cited by 238
Sun, S., Brandt, M., & Easton, M. (2017) · Laser Additive Manufacturing · doi:10.1016/b978-0-08-100433-3.00002-6 · Cited by 233
Xu, X., Robles-Martinez, P., Madla, C. M., Joubert, F., Goyanes, A., Basit, A. W., & Gaisford, S. (2020) · Additive Manufacturing · doi:10.1016/j.addma.2020.101071 · Cited by 231
From 3D to 4D printing: Approaches and typical applications
Zhou, Y., Huang, W. M., Kang, S. F., Wu, X. L., Lu, H. B., Fu, J., & Cui, H. (2015) · Journal of Mechanical Science and Technology · doi:10.1007/s12206-015-0925-0 · Cited by 224
Production and 3D printing processing of bio-based thermoplastic filament
Gkartzou, E., Koumoulos, E. P., & Charitidis, C. A. (2017) · Manufacturing Review · doi:10.1051/mfreview/2016020 · Cited by 222
Yu, K., Ritchie, A., Mao, Y., Dunn, M. L., & Qi, H. J. (2015) · Procedia IUTAM · doi:10.1016/j.piutam.2014.12.021 · Cited by 220
Lores, A., Azurmendi, N., Agote, Í., & Zuza, E. (2019) · Powder Metallurgy · doi:10.1080/00325899.2019.1669299 · Cited by 215
Mao, Q., Wang, Y., Li, Y., Juengpanich, S., Li, W., Chen, M., Yin, J., Fu, J., & Cai, X. (2020) · Materials Science and Engineering: C · doi:10.1016/j.msec.2020.110625 · Cited by 215
4D printing applications in medical field: A brief review
Javaid, M., & Haleem, A. (2019) · Clinical Epidemiology and Global Health · doi:10.1016/j.cegh.2018.09.007 · Cited by 212
A review on 3D printed smart devices for 4D printing
Lee, J., Kim, H.-C., Choi, J.-W., & Lee, I. H. (2017) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-017-0042-x · Cited by 209
The preparation of ZrO2-Al2O3 composite ceramic by SLA-3D printing and sintering processing
Liu, X., Zou, B., Xing, H., & Huang, C. (2020) · Ceramics International · doi:10.1016/j.ceramint.2019.09.054 · Cited by 201
Multi-Material Additive Manufacturing of Sustainable Innovative Materials and Structures
Singh, R., Kumar, R., Farina, I., Colangelo, F., Feo, L., & Fraternali, F. (2019) · Polymers · doi:10.3390/polym11010062 · Cited by 194
Tadakaluru, S., Thongsuwan, W., & Singjai, P. (2014) · Sensors · doi:10.3390/s140100868 · Cited by 192
3D Printed Polycaprolactone Carbon Nanotube Composite Scaffolds for Cardiac Tissue Engineering
Ho, C. M. B., Mishra, A., Lin, P. T. P., Ng, S. H., Yeong, W. Y., Kim, Y., & Yoon, Y. (2017) · Macromolecular Bioscience · doi:10.1002/mabi.201600250 · Cited by 192
DLP printing photocurable chitosan to build bio-constructs for tissue engineering
Shen, Y., Tang, H., Huang, X., Hang, R., Zhang, X., Wang, Y., & Yao, X. (2020) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2020.115970 · Cited by 191
Yuan, S., Zheng, Y., Chua, C. K., Yan, Q., & Zhou, K. (2018) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2017.11.007 · Cited by 190
3D Printing and Additive Manufacturing Technologies
(2019) · Springer eBooks · doi:10.1007/978-981-13-0305-0 · Cited by 190
Recent Advances in 3D Printing of Aliphatic Polyesters
Chiulan, I., Frone, A., Brandabur, C., & Panaitescu, D. (2017) · Bioengineering · doi:10.3390/bioengineering5010002 · Cited by 189
Kausar, A., Rafique, I., & Muhammad, B. (2017) · Polymer-Plastics Technology and Engineering · doi:10.1080/03602559.2016.1276594 · Cited by 188
3D Printing of Textiles: Potential Roadmap to Printing with Fibers
Chatterjee, K., & Ghosh, T. K. (2020) · Advanced Materials · doi:10.1002/adma.201902086 · Cited by 180
Additive manufacturing of polymer composites: Processing and modeling approaches
El Moumen, A., Tarfaoui, M., & Lafdi, K. (2019) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2019.04.029 · Cited by 178
4D printing of net shape parts made from Ni-Mn-Ga magnetic shape-memory alloys
Caputo, M. P., Berkowitz, A. E., Armstrong, A., Müllner, P., & Solomon, C. V. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.03.028 · Cited by 176
Leist, S. K., Gao, D., Chiou, R., & Zhou, J. (2017) · Virtual and Physical Prototyping · doi:10.1080/17452759.2017.1341815 · Cited by 173
Harris, M., Potgieter, J., Archer, R., & Arif, K. M. (2019) · Materials · doi:10.3390/ma12101664 · Cited by 173
Additive manufacturing of dental polymers: An overview on processes, materials and applications
JOCKUSCH, J., & ÖZCAN, M. (2020) · Dental Materials Journal · doi:10.4012/dmj.2019-123 · Cited by 169
An Overview on Additive Manufacturing of Polymers
Jasiuk, I., Abueidda, D. W., Kozuch, C., Pang, S., Su, F. Y., & McKittrick, J. (2018) · JOM · doi:10.1007/s11837-017-2730-y · Cited by 166
Cicala, G., Giordano, D., Tosto, C., Filippone, G., Recca, A., & Blanco, I. (2018) · Materials · doi:10.3390/ma11071191 · Cited by 166
3D Bioprinted Nanocellulose-Based Hydrogels for Tissue Engineering Applications: A Brief Review
Athukoralalage, S. S. A., Balu, R., Dutta, N. K., & Choudhury, N. R. (2019) · Polymers · doi:10.3390/polym11050898 · Cited by 156
Self-citationDirected and On‐Demand Alignment of Carbon Nanotube: A Review toward 3D Printing of Electronics
Goh, G. L., Agarwala, S., & Yeong, W. Y. (2019) · Advanced Materials Interfaces · doi:10.1002/admi.201801318 · Cited by 155
Fernandes, E. M., Mano, J. F., & Reis, R. L. (2013) · Composite Structures · doi:10.1016/j.compstruct.2013.05.012 · Cited by 152
Additive Manufacturing: Polymers Applicable for Laser Sintering (LS)
Schmid, M., & Wegener, K. (2016) · Procedia Engineering · doi:10.1016/j.proeng.2016.06.692 · Cited by 152
Polymer Selection for Hot-Melt Extrusion Coupled to Fused Deposition Modelling in Pharmaceutics
Pereira, G. G., Figueiredo, S., Fernandes, A. I., & Pinto, J. F. (2020) · Pharmaceutics · doi:10.3390/pharmaceutics12090795 · Cited by 147
A robotic cell for performing sheet lamination-based additive manufacturing
Bhatt, P. M., Kabir, A. M., Peralta, M., Bruck, H. A., & Gupta, S. K. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.02.002 · Cited by 146
Possible Applications of 3D Printing Technology on Textile Substrates
Korger, M., Bergschneider, J., Lutz, M., et al. (2016) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/141/1/012011 · Cited by 144
3D Printed Mechanically Robust Graphene/CNT Electrodes for Highly Efficient Overall Water Splitting
Peng, M., Shi, D., Sun, Y., Cheng, J., Zhao, B., Xie, Y., Zhang, J., Guo, W., Jia, Z., Liang, Z., et al. (2020) · Advanced Materials · doi:10.1002/adma.201908201 · Cited by 141
Lee, K., Wang, S., Lu, L., Jabbari, E., Currier, B. L., & Yaszemski, M. J. (2006) · Tissue Engineering · doi:10.1089/ten.2006.12.2801 · Cited by 140
Thin Flexible Pressure Sensor Array Based on Carbon Black/Silicone Rubber Nanocomposite
Wang, L., Ding, T., & Wang, P. (2009) · IEEE Sensors Journal · doi:10.1109/jsen.2009.2026467 · Cited by 139
Additive manufacturing in drug delivery applications: A review
Reddy, R. D. P., & Sharma, V. (2020) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2020.119820 · Cited by 137
Resilin-mimetics as a smart biomaterial platform for biomedical applications
Balu, R., Dutta, N. K., Dutta, A. K., & Choudhury, N. R. (2021) · Nature Communications · doi:10.1038/s41467-020-20375-x · Cited by 137
Self-citationTunable Biomimetic Hydrogels from Silk Fibroin and Nanocellulose
Dorishetty, P., Balu, R., Athukoralalage, S. S. A., Greaves, T. L., Mata, J. P., de Campo, L., Saha, N., Zannettino, A. C. W., Dutta, N. K., & Choudhury, N. R. (2020) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.9b05317 · Cited by 134
Self-citationYuan, S., Bai, J., Chua, C., et al. (2016) · Polymers · doi:10.3390/polym8100370 · Cited by 126
Developing flexible 3D printed antenna using conductive ABS materials
Mirzaee, M., Noghanian, S., Wiest, L., & Chang, I. (2015) · IEEE International Symposium on Antennas and Propagation and USNC-URSI Radio Science Meeting (AP-S/URSI) · doi:10.1109/aps.2015.7305043 · Cited by 122
3D Printing of Highly Stretchable Strain Sensors Based on Carbon Nanotube Nanocomposites
Abshirini, M., Charara, M., Liu, Y., Saha, M. C., & Altan, M. C. (2018) · Advanced Engineering Materials · doi:10.1002/adem.201800425 · Cited by 122
Roy, N. K., Behera, D., Dibua, O. G., Foong, C. S., & Cullinan, M. A. (2019) · Microsystems & Nanoengineering · doi:10.1038/s41378-019-0116-8 · Cited by 118
4D Printing: Materials, Technologies, and Future Applications in the Biomedical Field
Bajpai, A., Baigent, A., Raghav, S., Brádaigh, C. M. Ó., Koutsos, V., & Radacsi, N. (2020) · Sustainability · doi:10.3390/su122410628 · Cited by 118
Bioprintable tough hydrogels for tissue engineering applications
Dorishetty, P., Dutta, N. K., & Choudhury, N. R. (2020) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2020.102163 · Cited by 114
Self-citationModular fabrication of intelligent material-tissue interfaces for bioinspired and biomimetic devices
Clegg, J. R., Wagner, A. M., Shin, S. R., Hassan, S., Khademhosseini, A., & Peppas, N. A. (2019) · Progress in Materials Science · doi:10.1016/j.pmatsci.2019.100589 · Cited by 113
Design for 4D printing: Modeling and computation of smart materials distributions
Sossou, G., Demoly, F., Belkebir, H., Qi, H. J., Gomes, S., & Montavon, G. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.108074 · Cited by 109
Melocchi, A., Uboldi, M., Maroni, A., Foppoli, A. A., Palugan, L., Zema, L., & Gazzaniga, A. (2020) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2020.119155 · Cited by 109
Saed, A. B., Behravesh, A. H., Hasannia, S., Ardebili, S. A. A., Akhoundi, B., & Pourghayoumi, M. (2020) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2020.04.076 · Cited by 108
3D Printing of Highly Conductive Nanocomposites for the Functional Optimization of Liquid Sensors
Chizari, K., Daoud, M. A., Ravindran, A. R., & Therriault, D. (2016) · Small · doi:10.1002/smll.201601695 · Cited by 104
Sun, L., & Huang, W. (2009) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2009.11.036 · Cited by 102
Derazkola, H. A., Khodabakhshi, F., & Simchi, A. (2020) · Polymer Testing · doi:10.1016/j.polymertesting.2020.106690 · Cited by 100
Vat Photopolymerization 3D Printing of Nanocomposites: A Literature Review
Medellin, A., Du, W., Miao, G., Zou, J. T., Pei, Z., & Ma, C. (2019) · Journal of Micro and Nano-Manufacturing · doi:10.1115/1.4044288 · Cited by 99
Comparison of Ultem 9085 Used in Fused Deposition Modelling (FDM) with Polytherimide Blends
Cicala, G., Ognibene, G., Portuesi, S., Blanco, I., Rapisarda, M., Pergolizzi, E., & Recca, G. (2018) · Materials · doi:10.3390/ma11020285 · Cited by 98
From 3D to 4D printing—Design, material and fabrication for multi-functional multi-materials
Khare, V., Sonkaria, S., Lee, G.-Y., Ahn, S.-H., & Chu, W.-S. (2017) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-017-0035-9 · Cited by 88
3D printed water-soluble scaffolds for rapid production of PDMS micro-fluidic flow chambers
Dahlberg, T., Stangner, T., Zhang, H., Wiklund, K., Lundberg, P., Edman, L., & Andersson, M. J. (2018) · Scientific Reports · doi:10.1038/s41598-018-21638-w · Cited by 77
A Review on 4D Printing Material Composites and Their Applications
Rayate, A., & Jain, P. K. (2018) · Materials Today Proceedings · doi:10.1016/j.matpr.2018.06.424 · Cited by 75
Dorishetty, P., Balu, R., Sreekumar, A., de Campo, L., Mata, J. P., Choudhury, N. R., & Dutta, N. K. (2019) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.9b00147 · Cited by 72
Self-citation4D printed porous radiopaque shape memory polyurethane for endovascular embolization
Kashyap, D., Kumar, P. K., & Kanagaraj, S. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.04.009 · Cited by 70
Technologies in additive manufacturing for fiber reinforced composite materials: a review
Palanikumar, K., Mudhukrishnan, M., & Soorya Prabha, P. (2020) · Current Opinion in Chemical Engineering · doi:10.1016/j.coche.2020.01.001 · Cited by 69
Zhou, T., Zhang, L., Yao, Q. X., Ma, Y., Hou, C., Sun, B., Shao, C., Gao, P., & Chen, H. (2019) · Ceramics International · doi:10.1016/j.ceramint.2019.11.261 · Cited by 63
Wang, K., Pan, W., Liu, Z., Wallin, T. J., van Dover, G., Li, S., Giannelis, E. P., Mengüç, Y., & Shepherd, R. F. (2020) · Advanced Materials · doi:10.1002/adma.202001646 · Cited by 63
Oxygen plasma‐treated thermoresponsive polymer surfaces for cell sheet engineering
Shimizu, K., Fujita, H., & Nagamori, E. (2010) · Biotechnology and Bioengineering · doi:10.1002/bit.22677 · Cited by 62
Additive manufacturing of heat-sensitive polymer melt using a pellet-fed material extrusion
Zhou, Z., Salaoru, I., Morris, P., & Gibbons, G. J. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.10.040 · Cited by 62
A critical analysis of additive manufacturing technologies for aerospace applications
Angrish, A. (2014) · 2014 IEEE Aerospace Conference · doi:10.1109/aero.2014.6836456 · Cited by 59
Sinha, S. K. (2019) · Elsevier eBooks · doi:10.1016/b978-0-12-816805-9.00005-3 · Cited by 59
Fabrication of graphene-based 3D structures by stereolithography
Korhonen, H., Sinh, L. H., Luong, N. D., et al. (2015) · physica status solidi (a) · doi:10.1002/pssa.201532761 · Cited by 58
Dilag, J., Chen, T., Li, S., & Bateman, S. A. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.01.009 · Cited by 55
Freund, R., Watschke, H., Heubach, J., & Vietor, T. (2019) · Applied Sciences · doi:10.3390/app9091782 · Cited by 54
Zhang, G., Chen, H., Yang, S., Guo, Y., Li, N., Zhou, H., & Cao, Y. X. (2018) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2018.04.032 · Cited by 52
Deshmukh, K., Muzaffar, A., Kovářík, T., Křenek, T., Ahamed, M. B., & Pasha, S. K. K. (2019) · Elsevier eBooks · doi:10.1016/b978-0-12-816805-9.00017-x · Cited by 52
Stereolithography‐based 3D printed photosensitive polymer/boron nitride nanoplatelets composites
Bustillos, J., Montero, D., Loganathan, A., Boesl, B., & Agarwal, A. K. (2017) · Polymer Composites · doi:10.1002/pc.24662 · Cited by 51
Drug Delivery Applications of Three-Dimensional Printed (3DP) Mesoporous Scaffolds
Limongi, T., Susa, F., Allione, M., & Fabrizio, E. M. D. (2020) · Pharmaceutics · doi:10.3390/pharmaceutics12090851 · Cited by 50
Five innovative ways to use 3D printing in the laboratory
Silver, A. (2018) · Nature · doi:10.1038/d41586-018-07853-5 · Cited by 48
Prototyping chips in minutes: Direct Laser Plotting (DLP) of functional microfluidic structures
Wang, L., Kodzius, R., Yi, X., Li, S., Hui, Y. S., & Wen, W. (2012) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2012.04.011 · Cited by 46
Saed, A. B., Behravesh, A. H., Hasannia, S., Akhoundi, B., Hedayati, S. K., & Gashtasbi, F. (2020) · European Polymer Journal · doi:10.1016/j.eurpolymj.2020.110057 · Cited by 46
Liu, Y., & Chou, T. (2020) · Materials Today Advances · doi:10.1016/j.mtadv.2019.100045 · Cited by 45
Miniaturized Diaphragm Vacuum Pump by Multi-Material Additive Manufacturing
Taylor, A., & Velásquez–García, L. F. (2017) · Journal of Microelectromechanical Systems · doi:10.1109/jmems.2017.2743020 · Cited by 42
Fabrication of Photothermally Responsive Nanocomposite Hydrogel through 3D Printing
Zhang, L., Zhang, X., Li, L., Liu, Y., Wang, D., Xu, L., Bao, J., & Zhang, A. (2019) · Macromolecular Materials and Engineering · doi:10.1002/mame.201900718 · Cited by 41
Multi-Material 3D Printed Bendable Smart Sensing Structures
Nassar, H., Ntagios, M., Navaraj, W. T., & Dahiva, R. (2018) · Proceedings of IEEE Sensors/Proceedings of IEEE Sensors ... · doi:10.1109/icsens.2018.8589625 · Cited by 40
Gallup, N., Pringle, A. M., Oberloier, S., Tanikella, N. G., & Pearce, J. M. (2020) · HardwareX · doi:10.1016/j.ohx.2020.e00135 · Cited by 39
Emerging polymeric materials in additive manufacturing for use in biomedical applications
Gladman, A. S., García‐Leiner, M., & Sauer-Budge, A. F. (2019) · AIMS bioengineering · doi:10.3934/bioeng.2019.1.1 · Cited by 34
A robust ink deposition system for binder jetting and material jetting
Shen, X., & Naguib, H. E. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.100820 · Cited by 34
Whelan, D. N. (2016) · Elsevier eBooks · doi:10.1016/b978-0-323-35824-8.00024-4 · Cited by 30
Functional 3D Printed Polymeric Materials
Ortiz‐Acosta, D., & Moore, T. (2019) · IntechOpen eBooks · doi:10.5772/intechopen.80686 · Cited by 30
Three-dimensional printing with biomaterials in craniofacial and dental tissue engineering
Liao, W., Xu, L., Wangrao, K., Du, Y., Xiong, Q., & Yao, Y. (2019) · PeerJ · doi:10.7717/peerj.7271 · Cited by 28
Wang, B., Liu, J., Chen, K., Wang, Y., & Shao, Z. (2020) · Polymer Engineering and Science · doi:10.1002/pen.25336 · Cited by 25
A Review of Three-dimensional Printing for Biomedical and Tissue Engineering Applications
Devi, M. G., Amutheesan, M., Govindhan, R., & Karthikeyan, B. (2018) · The Open Biotechnology Journal · doi:10.2174/1874070701812010241 · Cited by 24
Trends of using polymer composite materials in additive manufacturing
Regassa, Y., Lemu, H. G., & Sirabizuh, B. (2019) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/659/1/012021 · Cited by 24
Hierarchical multi-stable shapes in mechanical memory metal
Seffen, K. A. (2006) · Scripta Materialia · doi:10.1016/j.scriptamat.2006.10.038 · Cited by 22
Kim, J., Lee, J.-Y., Lee, K., Kim, H., & Ahn, S. (2013) · Journal of Mechanical Science and Technology · doi:10.1007/s12206-013-0832-1 · Cited by 22
Analytical technique for the two-dimensional stress wave model of memory alloy dampers
Manzoor, T., Shabbir, G., & Khalid, F. A. (2012) · Journal of Mechanical Science and Technology · doi:10.1007/s12206-012-0814-8 · Cited by 7
Cited by
Kafle, A., Luis, E., Silwal, R., Pan, H. M., Shrestha, P. L., & Bastola, A. K. (2021) · Polymers · doi:10.3390/polym13183101 · Cited by 587
Additive manufacturing by digital light processing: a review
Chaudhary, R., Fabbri, P., Leoni, E., Mazzanti, F., Akbari, R., & Antonini, C. (2023) · Progress in Additive Manufacturing · doi:10.1007/s40964-022-00336-0 · Cited by 450
Rheological characterisation of ceramic inks for 3D direct ink writing: A review
del-Mazo-Barbara, L., & Ginebra, M.-P. (2021) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2021.08.031 · Cited by 444
Alami, A. H., Ghani Olabi, A., Alashkar, A., Alasad, S., Aljaghoub, H., Rezk, H., & Abdelkareem, M. A. (2023) · Ain Shams Engineering Journal · doi:10.1016/j.asej.2023.102516 · Cited by 349
Additive manufacturing of ceramics: Advances, challenges, and outlook
Dadkhah, M., Tulliani, J.-M., Saboori, A., & Iuliano, L. (2023) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2023.07.033 · Cited by 272
Metadata
- Authors
- Saleh Alghamdi, S., John, S., Roy Choudhury, N., & Dutta, N. K.
- Venue
- Polymers
- Publisher
- MDPI AG
- Published
- 2021-02-28
- Volume
- 13
- Issue
- 5
- Pages
- 753
- ISSN
- 2073-4360 (ISSN-L)
- OpenAlex
- W3133877934
- Cited by
- 469
- References
- 159
- FWCI
- 21.24
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.