A Study of the Toyota Production System From an Industrial Engineering Viewpoint
The DOI matches its Crossref record.
Abstract
This is the "green book" that started it all -- the first book in English on JIT, written from the engineer's viewpoint. When Omark Industries bought 500 copies and studied it companywide, Omark became the American pioneer in JIT.Here is Dr. Shingo's classic industrial engineering rationale for the priority of process-based over operational improvements in manufacturing. He explains the basic mechanisms of the Toyota production system, examines production as a functional network of processes and operations, and then discusses the mechanism necessary to make JIT possible in any manufacturing plant. Provides original source material on Just-ln-Time Demonstrates new ways to think about profit, inventory, waste, and productivity Explains the principles of leveling, standard work procedures, multi-machine handling, supplier relations, and much more If you are a serious student of manufacturing, you will benefit greatly from reading this primary resource on the powerful fundamentals of JIT.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Seven types of Muda exist [2]: defects, overproduction, transport, waits, useless stocks, useless movement, and useless or expensive processes.”
From Poka Yoke Meets Deep Learning: A Proof of Concept for an Assembly Line Application (2022) · cites this paper as [2]
Citations
Cites
Still being checked.
Cited by
The genealogy of lean production
Holweg, M. (2007) · Journal of Operations Management · doi:10.1016/j.jom.2006.04.001 · Cited by 1,480
Lean Software Development: An Agile Toolkit
Poppendieck, M., & Poppendieck, T. (2003) · International Linear Collider · Cited by 1,359
The seven value stream mapping tools
Hines, P., & Rich, N. (1997) · International Journal of Operations & Production Management · doi:10.1108/01443579710157989 · Cited by 944
Defining lean production: some conceptual and practical issues
Pettersen, J. (2009) · The TQM Journal · doi:10.1108/17542730910938137 · Cited by 642
Assessing changes towards lean production
Karlsson, C., & Åhlström, P. (1996) · International Journal of Operations & Production Management · doi:10.1108/01443579610109820 · Cited by 621
Lean production and sustainable competitive advantage
Lewis, M. A. (2000) · International Journal of Operations & Production Management · doi:10.1108/01443570010332971 · Cited by 578
The impact of lean methods and tools on the operational performance of manufacturing organisations
Belekoukias, I., Garza-Reyes, J. A., & Kumar, V. (2014) · International Journal of Production Research · doi:10.1080/00207543.2014.903348 · Cited by 474
“The main objective of autonomation is to detect any abnormalities, prevent quality defects and thus improve quality (Liker and Meier 2006; Shingo 1981).”
BackgroundInvesting in Reduced Setups in the EOQ Model
Porteus, E. L. (1985) · Management Science · doi:10.1287/mnsc.31.8.998 · Cited by 464
JIT Manufacturing: A Survey of Implementations in Small and Large U.S. Manufacturers
White, R. E., Pearson, J. N., & Wilson, J. R. (1999) · Management Science · doi:10.1287/mnsc.45.1.1 · Cited by 416
Four decades of lean: a systematic literature review
Stone, K. B. (2012) · International Journal of Lean Six Sigma · doi:10.1108/20401461211243702 · Cited by 393
Japanese production management: An evolution—With mixed success
Schonberger, R. J. (2007) · Journal of Operations Management · doi:10.1016/j.jom.2006.04.003 · Cited by 375
Seth *, D., & Gupta, V. (2005) · Production Planning & Control · doi:10.1080/09537280512331325281 · Cited by 348
The effects of Lean production on worker job stress
Conti, R., Angelis, J., Cooper, C., Faragher, B., & Gill, C. (2006) · International Journal of Operations & Production Management · doi:10.1108/01443570610682616 · Cited by 336
Chiarini, A. (2014) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2014.07.080 · Cited by 336
Implementing lean production systems: research areas and opportunities for future studies
Marodin, G. A., & Saurin, T. A. (2013) · International Journal of Production Research · doi:10.1080/00207543.2013.826831 · Cited by 328
Sensemaking on the Shop Floor: Narratives of Knowledge in Organizations*
Patriotta, G. (2003) · Journal of Management Studies · doi:10.1111/1467-6486.00343 · Cited by 323
Exploring barriers in lean implementation
R. Jadhav, J., S. Mantha, S., & B. Rane, S. (2014) · International Journal of Lean Six Sigma · doi:10.1108/ijlss-12-2012-0014 · Cited by 319
Specialization and Variety in Repetitive Tasks: Evidence from a Japanese Bank
Staats, B. R., & Gino, F. (2012) · Management Science · doi:10.1287/mnsc.1110.1482 · Cited by 311
Lean, green practices and process innovation: A model for green supply chain performance
Cherrafi, A., Garza-Reyes, J. A., Kumar, V., Mishra, N., Ghobadian, A., & Elfezazi, S. (2018) · International Journal of Production Economics · doi:10.1016/j.ijpe.2018.09.031 · Cited by 307
Mackelprang, A. W., & Nair, A. (2010) · Journal of Operations Management · doi:10.1016/j.jom.2009.10.002 · Cited by 302
In pursuit of implementation patterns: the context of Lean and Six Sigma
Shah, R., Chandrasekaran, A., & Linderman, K. (2008) · International Journal of Production Research · doi:10.1080/00207540802230504 · Cited by 296
Reducing Waste and Errors: Piloting Lean Principles at Intermountain Healthcare
Jimmerson, C., Weber, D., & Sobek, D. K. (2005) · The Joint Commission Journal on Quality and Patient Safety · doi:10.1016/s1553-7250(05)31032-4 · Cited by 294
Enabling the Circular Economy transition: a sustainable lean manufacturing recipe for Industry 4.0
Ciliberto, C., Szopik‐Depczyńska, K., Tarczyńska‐Łuniewska, M., Ruggieri, A., & Ioppolo, G. (2021) · Business Strategy and the Environment · doi:10.1002/bse.2801 · Cited by 278
The effect of lean methods and tools on the environmental performance of manufacturing organisations
Garza-Reyes, J. A., Kumar, V., Chaikittisilp, S., & Tan, K. H. (2018) · International Journal of Production Economics · doi:10.1016/j.ijpe.2018.03.030 · Cited by 277
“Autonomation’s main objective is to improve quality by preventing quality defects Sensitivity: Internal (Shingo, 1989).”
BackgroundMethodInfluentialIntegrating production and engineering perspectives on the customer order decoupling point
Wikner, J., & Rudberg, M. (2005) · International Journal of Operations & Production Management · doi:10.1108/01443570510605072 · Cited by 277
Detty, R. B., & Yingling, J. C. (2000) · International Journal of Production Research · doi:10.1080/002075400189509 · Cited by 274
Lean Processes for Sustainable Project Delivery
Lapinski, A. R., Horman, M. J., & Riley, D. R. (2006) · Journal of Construction Engineering and Management · doi:10.1061/(asce)0733-9364(2006)132:10(1083 · Cited by 268
Origins of lean management in America: The role of Connecticut businesses
Emiliani, M. L. (2006) · Journal of Management History · doi:10.1108/13552520610654069 · Cited by 266
Sustainability: the elusive element of process improvement
Bateman, N. (2005) · International Journal of Operations & Production Management · doi:10.1108/01443570510581862 · Cited by 265
The impact of just-in-time manufacturing on firm performance in the US
Huson, M., & Nanda, D. (1995) · Journal of Operations Management · doi:10.1016/0272-6963(95)00011-g · Cited by 261
Creating the customer‐responsive supply chain: a reconciliation of concepts
Reichhart, A., & Holweg, M. (2007) · International Journal of Operations & Production Management · doi:10.1108/01443570710830575 · Cited by 251
A decomposition approach for manufacturing system design
Cochran, D. S., Arinez, J. F., Duda, J. W., & Linck, J. (2001) · Journal of Manufacturing Systems · doi:10.1016/s0278-6125(01)80058-3 · Cited by 250
Agus, A., & Shukri Hajinoor, M. (2012) · International Journal of Quality & Reliability Management · doi:10.1108/02656711211190891 · Cited by 242
Supplier development: Customers as a catalyst of process change
Hartley, J. L., & Choi, T. Y. (1996) · Business Horizons · doi:10.1016/s0007-6813(96)90050-6 · Cited by 241
Leanness: experiences from the journey to date
Papadopoulou, T. C., & Özbayrak, M. (2005) · Journal of Manufacturing Technology Management · doi:10.1108/17410380510626196 · Cited by 236
The Toyota Production System and art: making highly customized and creative products the Toyota way
Lander, E., & Liker, J. K. (2007) · International Journal of Production Research · doi:10.1080/00207540701223519 · Cited by 232
The Effect of Leadtime Uncertainty in a Simple Stochastic Inventory Model
Song, J.-S. (1994) · Management Science · doi:10.1287/mnsc.40.5.603 · Cited by 222
Design for Variety: A Methodology for Understanding the Costs of Product Proliferation
Martin, M. V., & Ishii, K. (1996) · doi:10.1115/96-detc/dtm-1610 · Cited by 222
Method for Waste Control in the Building Industry
Formoso, C. T., Isatto, E. L., & Hirota, E. H. (1999) · Cited by 220
Lean service operations: translating lean production principles to service operations
Åhlström, P. (2004) · International Journal of Services Technology and Management · doi:10.1504/ijstm.2004.006284 · Cited by 219
Adapting lean manufacturing principles to the textile industry
Hodge, G. L., Goforth Ross, K., Joines, J. A., & Thoney, K. (2011) · Production Planning & Control · doi:10.1080/09537287.2010.498577 · Cited by 218
Visual management in production management: a literature synthesis
Tezel, A., Koskela, L., & Tzortzopoulos, P. (2016) · Journal of Manufacturing Technology Management · doi:10.1108/jmtm-08-2015-0071 · Cited by 217
A FRAMEWORK AND MEASUREMENT INSTRUMENT FOR JUST‐IN‐TIME MANUFACTURING
SAKAKIBARA, S., FLYNN, B. B., & SCHROEDER, R. G. (1993) · Production and Operations Management · doi:10.1111/j.1937-5956.1993.tb00097.x · Cited by 207
Change processes towards lean production: the role of the remuneration system
Karlsson, C., & Åhlström, P. (1995) · International Journal of Operations & Production Management · doi:10.1108/01443579510102918 · Cited by 205
Kanban in software engineering: A systematic mapping study
Ahmad, M. O., Dennehy, D., Conboy, K., & Oivo, M. (2017) · Journal of Systems and Software · doi:10.1016/j.jss.2017.11.045 · Cited by 205
A Classification Scheme for the Process Industry to Guide the Implementation of Lean
Abdulmalek, F. A., Rajgopal, J., & Needy, K. L. (2006) · Engineering Management Journal · doi:10.1080/10429247.2006.11431690 · Cited by 203
Lean manufacturing: a perspective of lean suppliers
Chun Wu, Y. (2003) · International Journal of Operations & Production Management · doi:10.1108/01443570310501880 · Cited by 202
Daniyan, I. A., Adeodu, A. O., Mpofu, K., Maladzhi, R. W., & Katumba, M. G. K.-K. (2022) · Heliyon · doi:10.1016/j.heliyon.2022.e09043 · Cited by 202
Lean manufacturing performance in Indian manufacturing plants
Ghosh, M. (2012) · Journal of Manufacturing Technology Management · doi:10.1108/17410381311287517 · Cited by 201
Applying lean thinking to new product introduction
Haque, B., & James-moore, M. (2004) · Journal of Engineering Design · doi:10.1080/0954482031000150125 · Cited by 200
A century of evolution from Harris׳s basic lot size model: Survey and research agenda
Andriolo, A., Battini, D., Grubbström, R. W., Persona, A., & Sgarbossa, F. (2014) · International Journal of Production Economics · doi:10.1016/j.ijpe.2014.01.013 · Cited by 198
JIT purchasing and performance: an exploratory analysis of buyer and supplier perspectives
Dong, Y., Carter, C. R., & Dresner, M. E. (2001) · Journal of Operations Management · doi:10.1016/s0272-6963(00)00066-8 · Cited by 197
COVID- 19: outcomes for Global Supply Chains
Fonseca, L. M., & Azevedo, A. L. (2020) · Management & Marketing · doi:10.2478/mmcks-2020-0025 · Cited by 194
Empirical Science: New Frontier in Operations Management Research
Swamidass, P. M. (1991) · The Academy of Management Review · doi:10.2307/258981 · Cited by 192
Lean Implementation Frameworks: The Challenges for SMEs
Almanei, M., Salonitis, K., & Xu, Y. (2017) · Procedia CIRP · doi:10.1016/j.procir.2017.03.170 · Cited by 192
Criteria for a lean organisation: development of a lean assessment tool
Pakdil, F., & Leonard, K. M. (2014) · International Journal of Production Research · doi:10.1080/00207543.2013.879614 · Cited by 190
Sistema Toyota de produção: mais do que simplesmente Just-in-Time
Ghinato, P. (1995) · Production · doi:10.1590/s0103-65131995000200004 · Cited by 189
The relationship between JIT practices and type of production system
White, R. E., & Prybutok, V. (2001) · Omega · doi:10.1016/s0305-0483(00)00033-5 · Cited by 185
Seth, D., Seth, N., & Dhariwal, P. (2017) · Production Planning & Control · doi:10.1080/09537287.2017.1300352 · Cited by 185
The evolution of production models: is a new paradigm emerging?
Bartezzaghi, E. (1999) · International Journal of Operations & Production Management · doi:10.1108/01443579910247446 · Cited by 185
Implementing lean—Outcomes from SME case studies
Pearce, A., Pons, D. J., & Neitzert, T. R. (2018) · Operations Research Perspectives · doi:10.1016/j.orp.2018.02.002 · Cited by 183
Lean Methodologies and Techniques for Modular Construction: Chronological and Critical Review
Innella, F., Arashpour, M., & Bai, Y. (2019) · Journal of Construction Engineering and Management · doi:10.1061/(asce)co.1943-7862.0001712 · Cited by 180
Process management tasks: a conceptual and practical view
Paim, R., Caulliraux, H. M., & Cardoso, R. (2008) · Business Process Management Journal · doi:10.1108/14637150810903066 · Cited by 179
Application of benchmarking for assessing the lean manufacturing implementation
Gurumurthy, A., & Kodali, R. (2009) · Benchmarking An International Journal · doi:10.1108/14635770910948268 · Cited by 173
Lost in transition: the transfer of lean manufacturing to construction
Jørgensen, B., & Emmitt, S. (2008) · Engineering, Construction and Architectural Management · doi:10.1108/09699980810886874 · Cited by 169
A framework for assessing the use of lean production practices in manufacturing cells
Saurin, T. A., Marodin, G. A., & Ribeiro, J. L. D. (2011) · International Journal of Production Research · doi:10.1080/00207543.2010.482567 · Cited by 165
Lean thinking in the highways construction sector: motivation, implementation and barriers
Tezel, A., Koskela, L., & Aziz, Z. (2018) · Production Planning & Control · doi:10.1080/09537287.2017.1412522 · Cited by 165
Chiarini, A. (2011) · International Journal of Lean Six Sigma · doi:10.1108/20401461111189425 · Cited by 165
Sequences in the implementation of lean production
Åhlström, P. (1998) · European Management Journal · doi:10.1016/s0263-2373(98)00009-7 · Cited by 158
Change processes towards lean production: The role of the management accounting system
Åhlström, P., & Karlsson, C. (1996) · International Journal of Operations & Production Management · doi:10.1108/01443579610131447 · Cited by 155
An Analytical Method for Performance Evaluation of Kanban Controlled Production Systems
Mascolo, M. D., Frein, Y., & Dallery, Y. (1996) · Operations Research · doi:10.1287/opre.44.1.50 · Cited by 154
Engaging environments: tacit knowledge sharing on the shop floor
Nakano, D., Muniz, J., & Batista, E. D. (2013) · Journal of Knowledge Management · doi:10.1108/13673271311315222 · Cited by 153
Inman, R. R., Blumenfeld, D. E., Huang, N., & Li, J. (2003) · International Journal of Production Research · doi:10.1080/0020754031000077293 · Cited by 147
Samuel, D., Found, P., & Williams, S. J. (2015) · International Journal of Operations & Production Management · doi:10.1108/ijopm-12-2013-0555 · Cited by 146
Supplier/Customer Inventory Relationships Under Just In Time
Chapman, S. N., & Carter, P. L. (1990) · Decision Sciences · doi:10.1111/j.1540-5915.1990.tb00315.x · Cited by 144
RFID opportunity analysis for leaner manufacturing
Brintrup, A. M., Ranasinghe, D. C., & Mcfarlane, D. C. (2009) · International Journal of Production Research · doi:10.1080/00207540903156517 · Cited by 140
Implementation of Lean Six Sigma for production process optimization in a paper production company
Adeodu, A. O., Kanakana-Katumba, M. G., & Maladzhi, R. W. (2021) · Journal of Industrial Engineering and Management · doi:10.3926/jiem.3479 · Cited by 139
An integrated approach for warehouse analysis and optimization: A case study
Dotoli, M., Epicoco, N., Falagario, M., Costantino, N., & Turchiano, B. (2015) · Computers in Industry · doi:10.1016/j.compind.2014.12.004 · Cited by 138
Kaizen and continuous improvement – trends and patterns over 30 years
Carnerud, D., Jaca, C., & Bäckström, I. (2018) · The TQM Journal · doi:10.1108/tqm-03-2018-0037 · Cited by 137
Zangwill, W. I. (1987) · Management Science · doi:10.1287/mnsc.33.10.1209 · Cited by 137
An extended model of design process of lean production systems by means of process variables
Houshmand, M., & Jamshidnezhad, B. (2005) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2005.01.004 · Cited by 134
LEAN MANUFACTURING TOOLS AND TECHNIQUES IN THE PROCESS INDUSTRY WITH A FOCUS ON STEEL
Abdullah, F. M. (2003) · D-Scholarship@Pitt (University of Pittsburgh) · Cited by 132
Chiarini, A., & Vagnoni, E. (2014) · International Journal of Production Research · doi:10.1080/00207543.2014.958596 · Cited by 131
Drivers and Barriers of Lean Implementation in the Greek Manufacturing Sector
Salonitis, K., & Tsinopoulos, C. (2016) · Procedia CIRP · doi:10.1016/j.procir.2016.11.033 · Cited by 130
Integrated analysis of quality and production logistics performance in manufacturing lines
Colledani, M., & Tolio, T. A. M. (2010) · International Journal of Production Research · doi:10.1080/00207540903443246 · Cited by 130
Shortell, S. M., Blodgett, J. C., Rundall, T. G., & Kralovec, P. D. (2018) · The Joint Commission Journal on Quality and Patient Safety · doi:10.1016/j.jcjq.2018.03.002 · Cited by 129
Lean distribution: concepts, contributions, conflicts
Reichhart, A., & Holweg, M. (2007) · International Journal of Production Research · doi:10.1080/00207540701223576 · Cited by 128
Management of lean waste in a public higher education institution
Klein, L. L., Tonetto, M. S., Ávila, L. V., & Moreira, R. M. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.125386 · Cited by 122
Japanization and/or Toyotaism?
Wood, S. (1991) · Work Employment and Society · doi:10.1177/0950017091005004006 · Cited by 122
Sedano, T., Ralph, P., & Peraire, C. (2017) · 2017 IEEE/ACM 39th International Conference on Software Engineering (ICSE) · doi:10.1109/icse.2017.20 · Cited by 120
Developing an understanding of lean thinking in process industries
Lyons, A. C., Vidamour, K., Jain, R., & Sutherland, M. (2013) · Production Planning & Control · doi:10.1080/09537287.2011.633576 · Cited by 118
Modelo metodológico de implementación de lean manufacturing
Yépez, M. P. S., Villamarín, G. A. F., & Bocanegra-Herrera, C. C. (2017) · Revista Escuela de Administración de Negocios · doi:10.21158/01208160.n83.2017.1825 · Cited by 118
Work organisation practices for lean production
Olivella, J., Cuatrecasas, L., & Gavilan, N. (2008) · Journal of Manufacturing Technology Management · doi:10.1108/17410380810898750 · Cited by 116
Towards greater understanding of success and survival of lean systems
Taylor, A., Taylor, M., & McSweeney, A. (2013) · International Journal of Production Research · doi:10.1080/00207543.2013.825382 · Cited by 113
Lean Implementation and Organizational Transformation: A Literature Review
Yadav, O. P., Nepal, B. P., Rahaman, M. M., & Lal, V. (2017) · Engineering Management Journal · doi:10.1080/10429247.2016.1263914 · Cited by 113
Cochran, D. S., Eversheim, W., Kubin, G., & Sesterhenn, M. (2000) · International Journal of Production Research · doi:10.1080/002075400188906 · Cited by 113
A DERIVATION OF THE UNDERLYING CONSTRUCTS OF JUST-IN-TIME MANAGEMENT SYSTEMS.
Davy, J. A., White, R. E., Merritt, N. J., & Gritzmacher, K. (1992) · Academy of Management Journal · doi:10.2307/256491 · Cited by 111
JIT and TQM: a case for joint implementation
Vuppalapati, K., Ahire, S. L., & Gupta, T. (1995) · International Journal of Operations & Production Management · doi:10.1108/01443579510083686 · Cited by 111
Salgado, E. G., Mello, C. H. P., da Silva, C. E. S., Oliveira, E., & de Almeida, D. A. (2009) · Gestão & Produção · doi:10.1590/s0104-530x2009000300003 · Cited by 110
Bergenwall, A. L., Chen, C., & White, R. E. (2012) · International Journal of Production Economics · doi:10.1016/j.ijpe.2012.04.016 · Cited by 106
Metadata
- Authors
- Shingo, S., & Bodek, N.
- Venue
- Routledge eBooks
- Publisher
- Routledge
- Published
- 2019-05-20
- OpenAlex
- W2904659199
- Cited by
- 1,064
- References
- 0
- Citations by year
- 2026: 4 · 2025: 20 · 2024: 18 · 2023: 27 · 2022: 25 · 2021: 94 · 2020: 66 · 2019: 45
- FWCI
- 68.32
- Type
- book
- Language
- en
- Open access
- closed
- Locations
- Routledge eBooks (publishedVersion)
- Topics
- Social Sciences › Business, Management and Accounting › Management Information Systems › Quality and Supply Management
- Social Sciences › Business, Management and Accounting › Strategy and Management › Management and Optimization Techniques
- Social Sciences › Decision Sciences › Management Science and Operations Research › Operations Management Techniques
- Keywords
- Toyota Production System, just-in-time, industrial engineering, process improvement, inventory reduction, waste reduction, productivity, leveling, supplier relationships, manufacturing operations
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.